aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2015-08-26Merge branch 'for-linus' of git://git.kernel.dk/linux-blockLinus Torvalds2-9/+21
Pull block fixes from Jens Axboe: "Two fixes in this pull request: - The writeback regression fix from Tejun, which has been weeks in the making. This fixes a case where we would sometimes not issue writeback when we should have. - An older fix for a memory corruption issue in mtip32xx. It was deferred since we wanted a better fix for this (driver should not have to handle that case), but given the timing, it's better to put the simple fix in for 4.2 release" * 'for-linus' of git://git.kernel.dk/linux-block: mtip32x: fix regression introduced by blk-mq per-hctx flush writeback: sync_inodes_sb() must write out I_DIRTY_TIME inodes and always call wait_sb_inodes()
2015-08-26Add factory recertified Crucial M500s to blacklistGuillermo A. Amaral1-0/+2
The Crucial M500 is known to have issues with queued TRIM commands, the factory recertified SSDs use a different model number naming convention which causes them to get ignored by the blacklist. The new naming convention boils down to: s/Crucial_/FC/ Signed-off-by: Guillermo A. Amaral <[email protected]> Signed-off-by: Tejun Heo <[email protected]> Cc: [email protected]
2015-08-26s390/sclp_vt220: support magic sysrequestsHendrik Brueckner1-1/+51
Implement magic sysrequest handling for the VT220 terminal (also known as the Integrated ASCII console on the HMC/SE). To invoke a "magic sysrequest" function, press "Ctrl+o" followed by a second character that designates the debugging function. The handling of the sysrq is scheduled away from the SCLP IRQ context; because large amounts of sysrq output might fill up the console buffers. The console might deadlock because it cannot empty the buffers while still in the receiving IRQ context. This behavior is the same as for the SCLP console. Reported-by: Horst Weber <[email protected]> Signed-off-by: Hendrik Brueckner <[email protected]> Reviewed-by: Peter Oberparleiter <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2015-08-26s390/ctrlchar: improve handling of magic sysrequestsHendrik Brueckner2-5/+23
Extract the sysrq handling from the ctrlchar_handle() into a separate function that can be directly used by other users. Introduce a new sysrq_work structure to embed the work_struct and to specify the magic sysrq function to be invoked. Signed-off-by: Hendrik Brueckner <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2015-08-26s390/numa: remove superfluous ARCH_WANT definesMichael Holzheu1-7/+0
The NUMA system call "__ARCH_WANT" defines are not used by the Linux kernel, therefore remove them. Fixes: 9df62adffeb0 ("s390/numa: add core infrastructure") Signed-off-by: Michael Holzheu <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2015-08-26s390/3270: redraw screen on unsolicited device endMartin Schwidefsky2-0/+8
If a 3270 terminal is disconnected and later reconnected again, it gets an unsolicited device end. This is currently ignored and you have to hit the clear key to get the screen redrawn. Add an automatic full redraw of the screen for this case. Signed-off-by: Martin Schwidefsky <[email protected]>
2015-08-26powerpc/PCI: Disable MSI/MSI-X interrupts at PCI probe time in OF caseGuilherme G. Piccoli1-0/+3
Since commit 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI"), the setup of dev->msi_cap/msix_cap and the disable of MSI/MSI-X interrupts isn't being done at PCI probe time, as the logic responsible for this was moved in the aforementioned commit from pci_device_add() to pci_setup_device(). The latter function is not reachable on PowerPC pseries platform during Open Firmware PCI probing time. This exhibits as drivers not being able to enable MSI, eg: bnx2x 0000:01:00.0: no msix capability found This patch calls pci_msi_setup_pci_dev() explicitly to disable MSI/MSI-X during PCI probe time on pSeries platform. Fixes: 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") [mpe: Flesh out change log and clarify comment] Signed-off-by: Guilherme G. Piccoli <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2015-08-26PCI: Make pci_msi_setup_pci_dev() non-static for use by arch codeGuilherme G. Piccoli2-1/+2
Commit 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") changed the location of the code that initialises dev->msi_cap/msix_cap and then disables MSI/MSI-X interrupts at PCI probe time in devices that have this flag set. It moved the code from pci_msi_init_pci_dev() to a new function named pci_msi_setup_pci_dev(), called by pci_setup_device(). The pseries PCI probing code does not call pci_setup_device(), so since the aforementioned commit the function pci_msi_setup_pci_dev() is not called and MSI/MSI-X interrupts are left enabled. Additionally because dev->msi_cap/msix_cap are not initialised no driver can ever enable MSI/MSI-X. To fix this, the pseries PCI probe should manually call pci_msi_setup_pci_dev(), so this patch makes it non-static. Fixes: 1851617cd2da ("PCI/MSI: Disable MSI at enumeration even if kernel doesn't support MSI") [mpe: Update change log to mention dev->msi_cap/msix_cap] Signed-off-by: Guilherme G. Piccoli <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2015-08-25usbnet: Get EVENT_NO_RUNTIME_PM bit before it is clearedEugene Shatokhin1-3/+4
It is needed to check EVENT_NO_RUNTIME_PM bit of dev->flags in usbnet_stop(), but its value should be read before it is cleared when dev->flags is set to 0. The problem was spotted and the fix was provided by Oliver Neukum <[email protected]>. Signed-off-by: Eugene Shatokhin <[email protected]> Acked-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-25Merge branch 'for-linus' of ↵Linus Torvalds1-5/+6
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull LSM regression fix from James Morris. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: LSM: restore certain default error codes
2015-08-25Merge branch 'libnvdimm-fixes' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm Pull nvdimm fix from Dan Williams: "A single fix for status register read size in the nd_blk driver. The effect of getting the width of this register read wrong is that all I/O fails when the read returns non-zero. Given the availability of ACPI 6 NFIT enabled platforms, this could reasonably wait to come in during the 4.3 merge window with a tag for 4.2-stable. Otherwise, this makes the 4.2 kernel fully functional with devices that conform to the mmio-block-apertures defined in the ACPI 6 NFIT (NVDIMM Firmware Interface Table)" * 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nfit, nd_blk: BLK status register is only 32 bits
2015-08-25drivers: net: xgene: fix: Oops in linkwatch_fire_eventIyappan Subramanian2-2/+6
[ 1065.801569] Internal error: Oops: 96000006 [#1] SMP ... [ 1065.866655] Hardware name: AppliedMicro Mustang/Mustang, BIOS 1.1.0 Apr 22 2015 [ 1065.873937] Workqueue: events_power_efficient phy_state_machine [ 1065.879837] task: fffffe01de105e80 ti: fffffe00bcf18000 task.ti: fffffe00bcf18000 [ 1065.887288] PC is at linkwatch_fire_event+0xac/0xc0 [ 1065.892141] LR is at linkwatch_fire_event+0xa0/0xc0 [ 1065.896995] pc : [<fffffe000060284c>] lr : [<fffffe0000602840>] pstate: 200001c5 [ 1065.904356] sp : fffffe00bcf1bd00 ... [ 1066.196813] Call Trace: [ 1066.199248] [<fffffe000060284c>] linkwatch_fire_event+0xac/0xc0 [ 1066.205140] [<fffffe000061167c>] netif_carrier_off+0x54/0x64 [ 1066.210773] [<fffffe00004f1654>] phy_state_machine+0x120/0x3bc [ 1066.216578] [<fffffe00000d8d10>] process_one_work+0x15c/0x3a8 [ 1066.222296] [<fffffe00000d9090>] worker_thread+0x134/0x470 [ 1066.227757] [<fffffe00000df014>] kthread+0xe0/0xf8 [ 1066.232525] Code: 97f65ee9 f9420660 d538d082 8b000042 (885f7c40) The fix is to call phy_disconnect() from xgene_enet_mdio_remove, which in turn call cancel_delayed_work_sync(). Signed-off-by: Iyappan Subramanian <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-25cls_u32: complete the check for non-forced case in u32_destroy()WANG Cong1-0/+13
In commit 1e052be69d04 ("net_sched: destroy proto tp when all filters are gone") I added a check in u32_destroy() to see if all real filters are gone for each tp, however, that is only done for root_ht, same is needed for others. This can be reproduced by the following tc commands: tc filter add dev eth0 parent 1:0 prio 5 handle 15: protocol ip u32 divisor 256 tc filter add dev eth0 protocol ip parent 1: prio 5 handle 15:2:2 u32 ht 15:2: match ip src 10.0.0.2 flowid 1:10 tc filter add dev eth0 protocol ip parent 1: prio 5 handle 15:2:3 u32 ht 15:2: match ip src 10.0.0.3 flowid 1:10 Fixes: 1e052be69d04 ("net_sched: destroy proto tp when all filters are gone") Reported-by: Akshat Kakkar <[email protected]> Cc: Jamal Hadi Salim <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-26LSM: restore certain default error codesJan Beulich1-5/+6
While in most cases commit b1d9e6b064 ("LSM: Switch to lists of hooks") retained previous error returns, in three cases it altered them without any explanation in the commit message. Restore all of them - in the security_old_inode_init_security() case this led to reiserfs using uninitialized data, sooner or later crashing the system (the only other user of this function - ocfs2 - was unaffected afaict, since it passes pre-initialized structures). Signed-off-by: Jan Beulich <[email protected]> Signed-off-by: Casey Schaufler <[email protected]> Signed-off-by: James Morris <[email protected]>
2015-08-25nfit, nd_blk: BLK status register is only 32 bitsRoss Zwisler1-2/+2
Only read 32 bits for the BLK status register in read_blk_stat(). The format and size of this register is defined in the "NVDIMM Driver Writer's guide": http://pmem.io/documents/NVDIMM_Driver_Writers_Guide.pdf Signed-off-by: Ross Zwisler <[email protected]> Reported-by: Nicholas Moulin <[email protected]> Tested-by: Nicholas Moulin <[email protected]> Reviewed-by: Jeff Moyer <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2015-08-25net: fec: use reinit_completion() in mdio accessor functionsRussell King1-2/+2
Rather than re-initialising the entire completion on every mdio access, use reinit_completion() which only resets the completion count. This avoids possible reinitialisation of the contained spinlock and waitqueue while they may be in use (eg, mid-completion.) Such an event could occur if there's a long delay in interrupt handling causing the mdio accessor to time out, then a second access comes in while the interrupt handler on a different CPU has called complete(). Another scenario where this has been observed is while locking has been missing at the phy layer, allowing concurrent attempts to access the MDIO bus. Signed-off-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-25net: phy: add locking to phy_read_mmd_indirect()/phy_write_mmd_indirect()Russell King1-4/+12
The phy layer is missing locking for the above two functions - it has been observed that two threads (userspace and the phy worker thread) can race, entering the bus ->write or ->read functions simultaneously. This causes the FEC driver to initialise a completion while another thread is waiting on it or while the interrupt is calling complete() on it, which causes spinlock unlock-without-lock, spinlock lockups, and completion timeouts. Fixes: a59a4d192 ("phy: add the EEE support and the way to access to the MMD registers.") Fixes: 0c1d77dfb ("net: libphy: Add phy specific function to access mmd phy registers") Signed-off-by: Russell King <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-25vxlan: re-ignore EADDRINUSE from igmp_joinMarcelo Ricardo Leitner1-0/+2
Before 56ef9c909b40[1] it used to ignore all errors from igmp_join(). That commit enhanced that and made it error out whatever error happened with igmp_join(), but that's not good because when using multicast groups vxlan will try to join it multiple times if the socket is reused and then the 2nd and further attempts will fail with EADDRINUSE. As we don't track to which groups the socket is already subscribed, it's okay to just ignore that error. Fixes: 56ef9c909b40 ("vxlan: Move socket initialization to within rtnl scope") Reported-by: John Nielsen <[email protected]> Signed-off-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-25Merge tag 'linux-can-fixes-for-4.2-20150825' of ↵David S. Miller5-70/+82
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== this is the updated pull request of one patch by me for the peak_usb driver. It fixes the driver, so that non FD adapters don't provide CAN FD bittimings. ==================== Signed-off-by: David S. Miller <[email protected]>
2015-08-25net: compile renesas directory if NET_VENDOR_RENESAS is configuredKazuya Mizuguchi1-1/+1
Currently the renesas ethernet driver directory is compiled if SH_ETH is configured rather than NET_VENDOR_RENESAS. Although incorrect that was quite harmless as until recently as SH_ETH configured the only driver in the renesas directory. However, as of c156633f1353 ("Renesas Ethernet AVB driver proper") the renesas directory includes another driver, configured by RAVB, and it makes little sense for it to have a hidden dependency on SH_ETH. Signed-off-by: Kazuya Mizuguchi <[email protected]> [horms: rewrote changelog] Signed-off-by: Simon Horman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-25ip6_gre: release cached dst on tunnel removalhuaibin Wang1-0/+1
When a tunnel is deleted, the cached dst entry should be released. This problem may prevent the removal of a netns (seen with a x-netns IPv6 gre tunnel): unregister_netdevice: waiting for lo to become free. Usage count = 3 CC: Dmitry Kozlov <[email protected]> Fixes: c12b395a4664 ("gre: Support GRE over IPv6") Signed-off-by: huaibin Wang <[email protected]> Signed-off-by: Nicolas Dichtel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-25mtip32x: fix regression introduced by blk-mq per-hctx flushJeff Moyer1-0/+8
Hi, After commit f70ced091707 (blk-mq: support per-distpatch_queue flush machinery), the mtip32xx driver may oops upon module load due to walking off the end of an array in mtip_init_cmd. On initialization of the flush_rq, init_request is called with request_index >= the maximum queue depth the driver supports. For mtip32xx, this value is used to index into an array. What this means is that the driver will walk off the end of the array, and either oops or cause random memory corruption. The problem is easily reproduced by doing modprobe/rmmod of the mtip32xx driver in a loop. I can typically reproduce the problem in about 30 seconds. Now, in the case of mtip32xx, it actually doesn't support flush/fua, so I think we can simply return without doing anything. In addition, no other mq-enabled driver does anything with the request_index passed into init_request(), so no other driver is affected. However, I'm not really sure what is expected of drivers. Ming, what did you envision drivers would do when initializing the flush requests? Signed-off-by: Jeff Moyer <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2015-08-25writeback: sync_inodes_sb() must write out I_DIRTY_TIME inodes and always ↵Tejun Heo1-9/+13
call wait_sb_inodes() e79729123f63 ("writeback: don't issue wb_writeback_work if clean") updated writeback path to avoid kicking writeback work items if there are no inodes to be written out; unfortunately, the avoidance logic was too aggressive and broke sync_inodes_sb(). * sync_inodes_sb() must write out I_DIRTY_TIME inodes but I_DIRTY_TIME inodes dont't contribute to bdi/wb_has_dirty_io() tests and were being skipped over. * inodes are taken off wb->b_dirty/io/more_io lists after writeback starts on them. sync_inodes_sb() skipping wait_sb_inodes() when bdi_has_dirty_io() breaks it by making it return while writebacks are in-flight. This patch fixes the breakages by * Removing bdi_has_dirty_io() shortcut from bdi_split_work_to_wbs(). The callers are already testing the condition. * Removing bdi_has_dirty_io() shortcut from sync_inodes_sb() so that it always calls into bdi_split_work_to_wbs() and wait_sb_inodes(). * Making bdi_split_work_to_wbs() consider the b_dirty_time list for WB_SYNC_ALL writebacks. Kudos to Eryu, Dave and Jan for tracking down the issue. Signed-off-by: Tejun Heo <[email protected]> Fixes: e79729123f63 ("writeback: don't issue wb_writeback_work if clean") Link: http://lkml.kernel.org/g/[email protected] Reported-and-bisected-by: Eryu Guan <[email protected]> Cc: Dave Chinner <[email protected]> Cc: Jan Kara <[email protected]> Cc: Ted Ts'o <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2015-08-25regulator: lp872x: handle error caseMilo Kim1-4/+7
If memory allocation gets failed on parsing the DT, then it returns error '-ENOMEM' explicitly. Then, the driver exists from the _probe(). Signed-off-by: Milo Kim <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2015-08-25regulator: lp872x: use the private data instead of updating I2C device ↵Milo Kim1-2/+5
platform data Currently, lp872x driver parses the DT and copies values into the 'cl->dev.platform_data' if 'of_node' exists. This may have architectural issue. Platform data is configurable through the DT or I2C board info inside the platform area. However, lp872x driver changes this configuration when it is loaded. The lp872x driver should get data from the platform side and use the private data, 'lp872x->pdata' instead of changing the original platform data. Signed-off-by: Milo Kim <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2015-08-25phylib: Make PHYs children of their MDIO bus, not the bus' parent.David Daney1-1/+1
commit 18ee49ddb0d2 ("phylib: rename mii_bus::dev to mii_bus::parent") changed the parent of PHY devices from the bus to the bus parent. Then, commit 4dea547fef1b ("phylib: rework to prepare for OF registration of PHYs") moved the code into phy_device.c At this point, it is somewhat unclear why the change was seen as necessary. But, when we look at the device model tree in /sys/devices, it is clearly incorrect. The PHYs should be children of their MDIO bus. Change the PHY's parent device to be the MDIO bus device. Cc: Lennert Buytenhek <[email protected]> Cc: Grant Likely <[email protected]> Signed-off-by: David Daney <[email protected]> Acked-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-25regulator: isl9305: Export OF module alias informationJavier Martinez Canillas1-0/+1
The I2C core always reports the MODALIAS uevent as "i2c:<modalias>" regardless of the mechanism that was used to register the device (i.e: OF or board code) and the table that is used later to match the driver with the device (i.e: I2C id table or OF match table). So drivers needs to export the I2C id table and this be built into the module or udev won't have the necessary information to autoload the needed driver module when the device is added. But this means that OF-only drivers needs to have both OF and I2C id tables that have to be kept in sync and also the dev node compatible manufacturer prefix is stripped when reporting the MODALIAS. Which can lead to issues if two vendors use the same I2C device name for example. To avoid the above, the I2C core behavior may be changed in the future to not require an SPI device table for OF-only drivers and report the OF module alias. So, it's better to also export the OF table even when is unused now to prevent breaking module loading when the core changes. Signed-off-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2015-08-25Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-7/+7
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fix from Thomas Gleixner: "A single fix for a APIC regression introduced in 4.0 which went undetected until now. I screwed up the x2apic cleanup in a subtle way. The screwup is only visible on systems which have x2apic preenabled in the BIOS and need to disable it during boot" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Fix fallout from x2apic cleanup
2015-08-25can: pcan_usb: don't provide CAN FD bittimings by non-FD adaptersMarc Kleine-Budde5-70/+82
The CAN FD data bittiming constants are provided via netlink only when there are valid CAN FD constants available in priv->data_bittiming_const. Due to the indirection of pointer assignments in the peak_usb driver the priv->data_bittiming_const never becomes NULL - not even for non-FD adapters. The data_bittiming_const points to zero'ed data which leads to this result when running 'ip -details link show can0': 35: can0: <NOARP,ECHO> mtu 16 qdisc noop state DOWN mode DEFAULT group default qlen 10 link/can promiscuity 0 can state STOPPED restart-ms 0 pcan_usb: tseg1 1..16 tseg2 1..8 sjw 1..4 brp 1..64 brp-inc 1 : dtseg1 0..0 dtseg2 0..0 dsjw 1..0 dbrp 0..0 dbrp-inc 0 <== BROKEN! clock 8000000 This patch changes the struct peak_usb_adapter::bittiming_const and struct peak_usb_adapter::data_bittiming_const to pointers to fix the assignemnt problems. Cc: linux-stable <[email protected]> # >= 4.0 Reported-by: Oliver Hartkopp <[email protected]> Tested-by: Oliver Hartkopp <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2015-08-25ALSA: hda - Fix path power activationTakashi Iwai1-5/+1
The widget power-saving code tries to turn up/down the power of each widget in the I/O paths that are modified at each jack plug/unplug. The recent report revealed that the power activation leaves some widgets unpowered after plugging. This is because snd_hda_activate_path() turns on path->active flag at the end of the function while the path power management is done before that. Then it's regarded as if nothing is active, and the driver turns off the power. The fix is simply to set the flag at the beginning of the function, before trying to power up. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102521 Cc: <[email protected]> [v4.1+] Signed-off-by: Takashi Iwai <[email protected]>
2015-08-25ALSA: hda - Check all inputs for is_active_nid_for_any()Takashi Iwai1-2/+3
The is_active_nid_for_any() function in the generic parser is supposed to check all connections from/to the given widget, but the current code checks only the first input connection (index = 0). This patch corrects the code to check all inputs by passing -1 to index argument. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=102521 Cc: <[email protected]> [v4.1+] Signed-off-by: Takashi Iwai <[email protected]>
2015-08-24nfsd: Add Jeff Layton as co-maintainerJ. Bruce Fields1-0/+1
Jeff has been doing a lot of development (including much of the state-locking rewrite just as one example) plus lots of review and other miscellaneous nfsd work, so let's acknowledge the status quo. I'll continue to be the one to send regular pull requests but Jeff will should be available to cover there occasionally too. Signed-off-by: J. Bruce Fields <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2015-08-24net: Fix RCU splat in af_keyDavid Ahern1-23/+23
Hit the following splat testing VRF change for ipsec: [ 113.475692] =============================== [ 113.476194] [ INFO: suspicious RCU usage. ] [ 113.476667] 4.2.0-rc6-1+deb7u2+clUNRELEASED #3.2.65-1+deb7u2+clUNRELEASED Not tainted [ 113.477545] ------------------------------- [ 113.478013] /work/monster-14/dsa/kernel.git/include/linux/rcupdate.h:568 Illegal context switch in RCU read-side critical section! [ 113.479288] [ 113.479288] other info that might help us debug this: [ 113.479288] [ 113.480207] [ 113.480207] rcu_scheduler_active = 1, debug_locks = 1 [ 113.480931] 2 locks held by setkey/6829: [ 113.481371] #0: (&net->xfrm.xfrm_cfg_mutex){+.+.+.}, at: [<ffffffff814e9887>] pfkey_sendmsg+0xfb/0x213 [ 113.482509] #1: (rcu_read_lock){......}, at: [<ffffffff814e767f>] rcu_read_lock+0x0/0x6e [ 113.483509] [ 113.483509] stack backtrace: [ 113.484041] CPU: 0 PID: 6829 Comm: setkey Not tainted 4.2.0-rc6-1+deb7u2+clUNRELEASED #3.2.65-1+deb7u2+clUNRELEASED [ 113.485422] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.7.5.1-0-g8936dbb-20141113_115728-nilsson.home.kraxel.org 04/01/2014 [ 113.486845] 0000000000000001 ffff88001d4c7a98 ffffffff81518af2 ffffffff81086962 [ 113.487732] ffff88001d538480 ffff88001d4c7ac8 ffffffff8107ae75 ffffffff8180a154 [ 113.488628] 0000000000000b30 0000000000000000 00000000000000d0 ffff88001d4c7ad8 [ 113.489525] Call Trace: [ 113.489813] [<ffffffff81518af2>] dump_stack+0x4c/0x65 [ 113.490389] [<ffffffff81086962>] ? console_unlock+0x3d6/0x405 [ 113.491039] [<ffffffff8107ae75>] lockdep_rcu_suspicious+0xfa/0x103 [ 113.491735] [<ffffffff81064032>] rcu_preempt_sleep_check+0x45/0x47 [ 113.492442] [<ffffffff8106404d>] ___might_sleep+0x19/0x1c8 [ 113.493077] [<ffffffff81064268>] __might_sleep+0x6c/0x82 [ 113.493681] [<ffffffff81133190>] cache_alloc_debugcheck_before.isra.50+0x1d/0x24 [ 113.494508] [<ffffffff81134876>] kmem_cache_alloc+0x31/0x18f [ 113.495149] [<ffffffff814012b5>] skb_clone+0x64/0x80 [ 113.495712] [<ffffffff814e6f71>] pfkey_broadcast_one+0x3d/0xff [ 113.496380] [<ffffffff814e7b84>] pfkey_broadcast+0xb5/0x11e [ 113.497024] [<ffffffff814e82d1>] pfkey_register+0x191/0x1b1 [ 113.497653] [<ffffffff814e9770>] pfkey_process+0x162/0x17e [ 113.498274] [<ffffffff814e9895>] pfkey_sendmsg+0x109/0x213 In pfkey_sendmsg the net mutex is taken and then pfkey_broadcast takes the RCU lock. Since pfkey_broadcast takes the RCU lock the allocation argument is pointless since GFP_ATOMIC must be used between the rcu_read_{,un}lock. The one call outside of rcu can be done with GFP_KERNEL. Fixes: 7f6b9dbd5afbd ("af_key: locking change") Signed-off-by: David Ahern <[email protected]> Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-24Documentation/x86: Rename IRQSTACKSIZE to IRQ_STACK_SIZEAlexander Kuleshov1-1/+1
The IRQSTACKSIZE was renamed to the IRQ_STACK_SIZE in the (26f80bd6a9 x86-64: Convert irqstacks to per-cpu) commit, but it still named IRQSTACKSIZE in the documentation. This patch fixes this. Signed-off-by: Alexander Kuleshov <[email protected]> Signed-off-by: Jonathan Corbet <[email protected]>
2015-08-24Documentation/Intel-IOMMU.txt: Modify definition of DRHDNan Xiao1-1/+1
Hi all, According to "Intel Virtualization Technology for Directed I/O" specification, DRHD stands for "DMA Remapping Hardware Unit Definition" , not "DMA Engine Reporting Structure". Signed-off-by: Nan Xiao <[email protected]>
2015-08-24docs: update HOWTO for 3.x -> 4.x versioningMario Carrillo1-14/+14
The HOWTO document needed updating for the new kernel versioning. Signed-off-by: Mario Carrillo <[email protected]> Signed-off-by: Jonathan Corbet <[email protected]>
2015-08-24ALSA: hda: fix possible NULL dereferenceMarkus Osterhoff1-1/+1
After a for-loop was replaced by list_for_each_entry, see Commit bbbc7e8502c9 ("ALSA: hda - Allocate hda_pcm objects dynamically"), Commit 751e2216899c ("ALSA: hda: fix possible null dereference"), a possible NULL pointer dereference has been introduced; this patch adds the NULL check on pcm->pcm, while leaving a potentially superfluous check on pcm itself untouched. Signed-off-by: Markus Osterhoff <[email protected]> Cc: <[email protected]> #v4.1+ Signed-off-by: Takashi Iwai <[email protected]>
2015-08-23net: bcmgenet: fix uncleaned dma flagsJaedon Shin1-0/+16
Clean the dma flags of multiq ring buffer int the interface stop process. This patch fixes that the genet is not running while the interface is re-enabled. $ ifup eth0 - running after booting $ ifdown eth0 $ ifup eth0 - not running and occur tx_timeout The bcmgenet_dma_disable() in bcmgenet_open() do clean ring16 dma flag only. If the genet has multiq, the dma register is not cleaned. and bcmgenet_init_dma() is not done correctly. in case GENET_V2(tx_queues=4), tdma_ctrl has 0x1e after running bcmgenet_dma_disable(). Signed-off-by: Jaedon Shin <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-23net: bcmgenet: Avoid sleeping in bcmgenet_timeoutFlorian Fainelli1-4/+0
bcmgenet_timeout() executes in atomic context, yet we will invoke napi_disable() which does sleep. Looking back at the changes, disabling TX napi and re-enabling it is completely useless, since we reclaim all TX buffers and re-enable interrupts, and wake up the TX queues. Fixes: 13ea657806cf ("net: bcmgenet: improve TX timeout") Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-23Linux 4.2-rc8Linus Torvalds1-1/+1
2015-08-23Merge tag 'scsi-fixes' of ↵Linus Torvalds3-13/+15
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "A couple of major (hang and deadlock) fixes with fortunately fairly rare triggering conditions. The PM oops is only really triggered by people using enclosure services (rare) and the fnic driver is mostly used in enterprise environments" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: SCSI: Fix NULL pointer dereference in runtime PM fnic: Use the local variable instead of I/O flag to acquire io_req_lock in fnic_queuecommand() to avoid deadloack
2015-08-23netlink: mmap: fix tx type checkKen-ichirou MATSUZAWA1-1/+1
I can't send netlink message via mmaped netlink socket since commit: a8866ff6a5bce7d0ec465a63bc482a85c09b0d39 netlink: make the check for "send from tx_ring" deterministic msg->msg_iter.type is set to WRITE (1) at SYSCALL_DEFINE6(sendto, ... import_single_range(WRITE, ... iov_iter_init(1, WRITE, ... call path, so that we need to check the type by iter_is_iovec() to accept the WRITE. Signed-off-by: Ken-ichirou MATSUZAWA <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2015-08-23kernel-doc: ignore unneeded attribute informationJonathan Corbet1-0/+2
The kernel-doc script gets confused by __attribute__(()) strings in structures, so just clean the out. Also ignore the CRYPTO_MINALIGN_ATTR macro used in the crypto subsystem. Signed-off-by: Jonathan Corbet <[email protected]>
2015-08-23Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds2-2/+2
Pull MIPS bug fixes from Ralf Baechle: "Two more fixes for 4.2. One fixes a build issue with the LLVM assembler - LLVM assembler macro names are case sensitive, GNU as macro names are insensitive; the other corrects a license string (GPL v2, not GPLv2) such that the module loader will recognice the license correctly" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: FIRMWARE: bcm47xx_nvram: Fix module license. MIPS: Fix LLVM build issue.
2015-08-22Merge branch 'for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull 9p regression fix from Al Viro: "Fix for breakage introduced when switching p9_client_{read,write}() to struct iov_iter * (went into 4.1)" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: 9p: ensure err is initialized to 0 in p9_client_read/write
2015-08-229p: ensure err is initialized to 0 in p9_client_read/writeVincent Bernat1-0/+2
Some use of those functions were providing unitialized values to those functions. Notably, when reading 0 bytes from an empty file on a 9P filesystem, the return code of read() was not 0. Tested with this simple program: #include <assert.h> #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> #include <unistd.h> int main(int argc, const char **argv) { assert(argc == 2); char buffer[256]; int fd = open(argv[1], O_RDONLY|O_NOCTTY); assert(fd >= 0); assert(read(fd, buffer, 0) == 0); return 0; } Cc: [email protected] # v4.1 Signed-off-by: Vincent Bernat <[email protected]> Signed-off-by: Al Viro <[email protected]>
2015-08-22Merge branch 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-armLinus Torvalds2-1/+4
Pull ARM fixes from Russell King: "Another couple of small ARM fixes. A patch from Masahiro Yamada who noticed that "make -jN all zImage" would end up generating bad images where N > 1, and a patch from Nicolas to fix the Marvell CPU user access optimisation code when page faults are disabled" * 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm: ARM: 8418/1: add boot image dependencies to not generate invalid images ARM: 8414/1: __copy_to_user_memcpy: fix mmap semaphore usage
2015-08-22Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds5-11/+14
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar: "Various low level fixes: fix more fallout from the FPU rework and the asm entry code rework, plus an MSI rework fix, and an idle-tracing fix" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fpu/math-emu: Fix crash in fork() x86/fpu/math-emu: Fix math-emu boot crash x86/idle: Restore trace_cpu_idle to mwait_idle() calls x86/irq: Build correct vector mapping for multiple MSI interrupts Revert "sched/x86_64: Don't save flags on context switch"
2015-08-22Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds4-4/+37
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fixes from Ingo Molnar: "Tooling fixes: a 'perf record' deadlock fix plus debuggability fixes" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf top: Show backtrace when handling a SIGSEGV on --stdio mode perf tools: Fix buildid processing perf tools: Make fork event processing more resilient perf tools: Avoid deadlock when map_groups are broken
2015-08-22x86/apic: Fix fallout from x2apic cleanupThomas Gleixner1-7/+7
In the recent x2apic cleanup I got two things really wrong: 1) The safety check in __disable_x2apic which allows the function to be called unconditionally is backwards. The check is there to prevent access to the apic MSR in case that the machine has no apic. Though right now it returns if the machine has an apic and therefor the disabling of x2apic is never invoked. 2) x2apic_disable() sets x2apic_mode to 0 after registering the local apic. That's wrong, because register_lapic_address() checks x2apic mode and therefor takes the wrong code path. This results in boot failures on machines with x2apic preenabled by BIOS and can also lead to an fatal MSR access on machines without apic. The solutions are simple: 1) Correct the sanity check for apic availability 2) Clear x2apic_mode _before_ calling register_lapic_address() Fixes: 659006bf3ae3 'x86/x2apic: Split enable and setup function' Reported-and-tested-by: Javier Monteagudo <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://bugzilla.redhat.com/show_bug.cgi?id=1224764 Cc: [email protected] # 4.0+ Cc: Laura Abbott <[email protected]> Cc: Jiang Liu <[email protected]> Cc: Joerg Roedel <[email protected]> Cc: Tony Luck <[email protected]> Cc: Borislav Petkov <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.