aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-06-12cpuset: restore sanity to cpuset_cpus_allowed_fallback()Joel Savitz1-1/+14
In the case that a process is constrained by taskset(1) (i.e. sched_setaffinity(2)) to a subset of available cpus, and all of those are subsequently offlined, the scheduler will set tsk->cpus_allowed to the current value of task_cs(tsk)->effective_cpus. This is done via a call to do_set_cpus_allowed() in the context of cpuset_cpus_allowed_fallback() made by the scheduler when this case is detected. This is the only call made to cpuset_cpus_allowed_fallback() in the latest mainline kernel. However, this is not sane behavior. I will demonstrate this on a system running the latest upstream kernel with the following initial configuration: # grep -i cpu /proc/$$/status Cpus_allowed: ffffffff,fffffff Cpus_allowed_list: 0-63 (Where cpus 32-63 are provided via smt.) If we limit our current shell process to cpu2 only and then offline it and reonline it: # taskset -p 4 $$ pid 2272's current affinity mask: ffffffffffffffff pid 2272's new affinity mask: 4 # echo off > /sys/devices/system/cpu/cpu2/online # dmesg | tail -3 [ 2195.866089] process 2272 (bash) no longer affine to cpu2 [ 2195.872700] IRQ 114: no longer affine to CPU2 [ 2195.879128] smpboot: CPU 2 is now offline # echo on > /sys/devices/system/cpu/cpu2/online # dmesg | tail -1 [ 2617.043572] smpboot: Booting Node 0 Processor 2 APIC 0x4 We see that our current process now has an affinity mask containing every cpu available on the system _except_ the one we originally constrained it to: # grep -i cpu /proc/$$/status Cpus_allowed: ffffffff,fffffffb Cpus_allowed_list: 0-1,3-63 This is not sane behavior, as the scheduler can now not only place the process on previously forbidden cpus, it can't even schedule it on the cpu it was originally constrained to! Other cases result in even more exotic affinity masks. Take for instance a process with an affinity mask containing only cpus provided by smt at the moment that smt is toggled, in a configuration such as the following: # taskset -p f000000000 $$ # grep -i cpu /proc/$$/status Cpus_allowed: 000000f0,00000000 Cpus_allowed_list: 36-39 A double toggle of smt results in the following behavior: # echo off > /sys/devices/system/cpu/smt/control # echo on > /sys/devices/system/cpu/smt/control # grep -i cpus /proc/$$/status Cpus_allowed: ffffff00,ffffffff Cpus_allowed_list: 0-31,40-63 This is even less sane than the previous case, as the new affinity mask excludes all smt-provided cpus with ids less than those that were previously in the affinity mask, as well as those that were actually in the mask. With this patch applied, both of these cases end in the following state: # grep -i cpu /proc/$$/status Cpus_allowed: ffffffff,ffffffff Cpus_allowed_list: 0-63 The original policy is discarded. Though not ideal, it is the simplest way to restore sanity to this fallback case without reinventing the cpuset wheel that rolls down the kernel just fine in cgroup v2. A user who wishes for the previous affinity mask to be restored in this fallback case can use that mechanism instead. This patch modifies scheduler behavior by instead resetting the mask to task_cs(tsk)->cpus_allowed by default, and cpu_possible mask in legacy mode. I tested the cases above on both modes. Note that the scheduler uses this fallback mechanism if and only if _every_ other valid avenue has been traveled, and it is the last resort before calling BUG(). Suggested-by: Waiman Long <[email protected]> Suggested-by: Phil Auld <[email protected]> Signed-off-by: Joel Savitz <[email protected]> Acked-by: Phil Auld <[email protected]> Acked-by: Waiman Long <[email protected]> Acked-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2019-06-12net: ethtool: Allow matching on vlan DEI bitMaxime Chevallier2-0/+6
Using ethtool, users can specify a classification action matching on the full vlan tag, which includes the DEI bit (also previously called CFI). However, when converting the ethool_flow_spec to a flow_rule, we use dissector keys to represent the matching patterns. Since the vlan dissector key doesn't include the DEI bit, this information was silently discarded when translating the ethtool flow spec in to a flow_rule. This commit adds the DEI bit into the vlan dissector key, and allows propagating the information to the driver when parsing the ethtool flow spec. Fixes: eca4205f9ec3 ("ethtool: add ethtool_rx_flow_spec to flow_rule structure translator") Reported-by: Michał Mirosław <[email protected]> Signed-off-by: Maxime Chevallier <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-12linux-next: DOC: RDS: Fix a typo in rds.txtMasanari Iida1-1/+1
This patch fixes a spelling typo in rds.txt Signed-off-by: Masanari Iida <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-12x86/kgdb: Return 0 from kgdb_arch_set_breakpoint()Matt Mullins1-1/+1
err must be nonzero in order to reach text_poke(), which caused kgdb to fail to set breakpoints: (gdb) break __x64_sys_sync Breakpoint 1 at 0xffffffff81288910: file ../fs/sync.c, line 124. (gdb) c Continuing. Warning: Cannot insert breakpoint 1. Cannot access memory at address 0xffffffff81288910 Command aborted. Fixes: 86a22057127d ("x86/kgdb: Avoid redundant comparison of patched code") Signed-off-by: Matt Mullins <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Reviewed-by: Nadav Amit <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Christophe Leroy <[email protected]> Cc: Daniel Thompson <[email protected]> Cc: Douglas Anderson <[email protected]> Cc: "Gustavo A. R. Silva" <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: "Peter Zijlstra (Intel)" <[email protected]> Cc: Rick Edgecombe <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: x86-ml <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-06-12mpls: fix af_mpls dependencies for realMatteo Croce1-1/+1
Randy reported that selecting MPLS_ROUTING without PROC_FS breaks the build, because since commit c1a9d65954c6 ("mpls: fix af_mpls dependencies"), MPLS_ROUTING selects PROC_SYSCTL, but Kconfig's select doesn't recursively handle dependencies. Change the select into a dependency. Fixes: c1a9d65954c6 ("mpls: fix af_mpls dependencies") Reported-by: Randy Dunlap <[email protected]> Signed-off-by: Matteo Croce <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-12selinux: fix a missing-check bug in selinux_sb_eat_lsm_opts()Gen Zhang1-6/+14
In selinux_sb_eat_lsm_opts(), 'arg' is allocated by kmemdup_nul(). It returns NULL when fails. So 'arg' should be checked. And 'mnt_opts' should be freed when error. Signed-off-by: Gen Zhang <[email protected]> Fixes: 99dbbb593fe6 ("selinux: rewrite selinux_sb_eat_lsm_opts()") Cc: <[email protected]> Signed-off-by: Paul Moore <[email protected]>
2019-06-12Merge branch 'mediatek-drm-fixes-5.2' of ↵Daniel Vetter4-31/+26
https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes CK writes: This include unbind error fix, clock control flow refinement, and PRIME mmap with page offset. Signed-off-by: Daniel Vetter <[email protected]> From: CK Hu <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/1560325868.3259.6.camel@mtksdaap41
2019-06-12Merge tag 'media/v5.2-2' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - a debug warning for satellite tuning at dvb core was producing too much noise - a regression at hfi_parser on Venus driver * tag 'media/v5.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: venus: hfi_parser: fix a regression in parser media: dvb: warning about dvb frequency limits produces too much noise
2019-06-12selinux: fix a missing-check bug in selinux_add_mnt_opt( )Gen Zhang1-5/+14
In selinux_add_mnt_opt(), 'val' is allocated by kmemdup_nul(). It returns NULL when fails. So 'val' should be checked. And 'mnt_opts' should be freed when error. Signed-off-by: Gen Zhang <[email protected]> Fixes: 757cbe597fe8 ("LSM: new method: ->sb_add_mnt_opt()") Cc: <[email protected]> [PM: fixed some indenting problems] Signed-off-by: Paul Moore <[email protected]>
2019-06-12arm64: tlbflush: Ensure start/end of address range are aligned to strideWill Deacon1-0/+3
Since commit 3d65b6bbc01e ("arm64: tlbi: Set MAX_TLBI_OPS to PTRS_PER_PTE"), we resort to per-ASID invalidation when attempting to perform more than PTRS_PER_PTE invalidation instructions in a single call to __flush_tlb_range(). Whilst this is beneficial, the mmu_gather code does not ensure that the end address of the range is rounded-up to the stride when freeing intermediate page tables in pXX_free_tlb(), which defeats our range checking. Align the bounds passed into __flush_tlb_range(). Cc: Catalin Marinas <[email protected]> Cc: Peter Zijlstra <[email protected]> Reported-by: Hanjun Guo <[email protected]> Tested-by: Hanjun Guo <[email protected]> Reviewed-by: Hanjun Guo <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2019-06-12usb: typec: Make sure an alt mode exist before getting its partnerHeikki Krogerus1-1/+1
Adding check to typec_altmode_get_partner() to prevent potential NULL pointer dereference. Reported-by: Vladimir Yerilov <[email protected]> Fixes: ad74b8649bea ("usb: typec: ucsi: Preliminary support for alternate modes") Signed-off-by: Heikki Krogerus <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2019-06-12KVM: arm/arm64: vgic: Fix kvm_device leak in vgic_its_destroyDave Martin1-0/+1
kvm_device->destroy() seems to be supposed to free its kvm_device struct, but vgic_its_destroy() is not currently doing this, resulting in a memory leak, resulting in kmemleak reports such as the following: unreferenced object 0xffff800aeddfe280 (size 128): comm "qemu-system-aar", pid 13799, jiffies 4299827317 (age 1569.844s) [...] backtrace: [<00000000a08b80e2>] kmem_cache_alloc+0x178/0x208 [<00000000dcad2bd3>] kvm_vm_ioctl+0x350/0xbc0 Fix it. Cc: Andre Przywara <[email protected]> Fixes: 1085fdc68c60 ("KVM: arm64: vgic-its: Introduce new KVM ITS device") Signed-off-by: Dave Martin <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2019-06-12KVM: arm64: Filter out invalid core register IDs in KVM_GET_REG_LISTDave Martin1-13/+40
Since commit d26c25a9d19b ("arm64: KVM: Tighten guest core register access from userspace"), KVM_{GET,SET}_ONE_REG rejects register IDs that do not correspond to a single underlying architectural register. KVM_GET_REG_LIST was not changed to match however: instead, it simply yields a list of 32-bit register IDs that together cover the whole kvm_regs struct. This means that if userspace tries to use the resulting list of IDs directly to drive calls to KVM_*_ONE_REG, some of those calls will now fail. This was not the intention. Instead, iterating KVM_*_ONE_REG over the list of IDs returned by KVM_GET_REG_LIST should be guaranteed to work. This patch fixes the problem by splitting validate_core_offset() into a backend core_reg_size_from_offset() which does all of the work except for checking that the size field in the register ID matches, and kvm_arm_copy_reg_indices() and num_core_regs() are converted to use this to enumerate the valid offsets. kvm_arm_copy_reg_indices() now also sets the register ID size field appropriately based on the value returned, so the register ID supplied to userspace is fully qualified for use with the register access ioctls. Cc: [email protected] Fixes: d26c25a9d19b ("arm64: KVM: Tighten guest core register access from userspace") Signed-off-by: Dave Martin <[email protected]> Reviewed-by: Andrew Jones <[email protected]> Tested-by: Andrew Jones <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2019-06-12KVM: arm64: Implement vq_present() as a macroViresh Kumar1-9/+3
This routine is a one-liner and doesn't really need to be function and can be implemented as a macro. Suggested-by: Dave Martin <[email protected]> Reviewed-by: Dave Martin <[email protected]> Signed-off-by: Viresh Kumar <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2019-06-12xdp: check device pointer before clearingIlya Maximets1-5/+6
We should not call 'ndo_bpf()' or 'dev_put()' with NULL argument. Fixes: c9b47cc1fabc ("xsk: fix bug when trying to use both copy and zero-copy on one queue id") Signed-off-by: Ilya Maximets <[email protected]> Acked-by: Jonathan Lemon <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-06-12bpf: net: Set sk_bpf_storage back to NULL for cloned skMartin KaFai Lau1-0/+3
The cloned sk should not carry its parent-listener's sk_bpf_storage. This patch fixes it by setting it back to NULL. Fixes: 6ac99e8f23d4 ("bpf: Introduce bpf sk local storage") Signed-off-by: Martin KaFai Lau <[email protected]> Acked-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-06-12Btrfs: fix race between block group removal and block group allocationFilipe Manana1-11/+13
If a task is removing the block group that currently has the highest start offset amongst all existing block groups, there is a short time window where it races with a concurrent block group allocation, resulting in a transaction abort with an error code of EEXIST. The following diagram explains the race in detail: Task A Task B btrfs_remove_block_group(bg offset X) remove_extent_mapping(em offset X) -> removes extent map X from the tree of extent maps (fs_info->mapping_tree), so the next call to find_next_chunk() will return offset X btrfs_alloc_chunk() find_next_chunk() --> returns offset X __btrfs_alloc_chunk(offset X) btrfs_make_block_group() btrfs_create_block_group_cache() --> creates btrfs_block_group_cache object with a key corresponding to the block group item in the extent, the key is: (offset X, BTRFS_BLOCK_GROUP_ITEM_KEY, 1G) --> adds the btrfs_block_group_cache object to the list new_bgs of the transaction handle btrfs_end_transaction(trans handle) __btrfs_end_transaction() btrfs_create_pending_block_groups() --> sees the new btrfs_block_group_cache in the new_bgs list of the transaction handle --> its call to btrfs_insert_item() fails with -EEXIST when attempting to insert the block group item key (offset X, BTRFS_BLOCK_GROUP_ITEM_KEY, 1G) because task A has not removed that key yet --> aborts the running transaction with error -EEXIST btrfs_del_item() -> removes the block group's key from the extent tree, key is (offset X, BTRFS_BLOCK_GROUP_ITEM_KEY, 1G) A sample transaction abort trace: [78912.403537] ------------[ cut here ]------------ [78912.403811] BTRFS: Transaction aborted (error -17) [78912.404082] WARNING: CPU: 2 PID: 20465 at fs/btrfs/extent-tree.c:10551 btrfs_create_pending_block_groups+0x196/0x250 [btrfs] (...) [78912.405642] CPU: 2 PID: 20465 Comm: btrfs Tainted: G W 5.0.0-btrfs-next-46 #1 [78912.405941] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.2-0-gf9626ccb91-prebuilt.qemu-project.org 04/01/2014 [78912.406586] RIP: 0010:btrfs_create_pending_block_groups+0x196/0x250 [btrfs] (...) [78912.407636] RSP: 0018:ffff9d3d4b7e3b08 EFLAGS: 00010282 [78912.407997] RAX: 0000000000000000 RBX: ffff90959a3796f0 RCX: 0000000000000006 [78912.408369] RDX: 0000000000000007 RSI: 0000000000000001 RDI: ffff909636b16860 [78912.408746] RBP: ffff909626758a58 R08: 0000000000000000 R09: 0000000000000000 [78912.409144] R10: ffff9095ff462400 R11: 0000000000000000 R12: ffff90959a379588 [78912.409521] R13: ffff909626758ab0 R14: ffff9095036c0000 R15: ffff9095299e1158 [78912.409899] FS: 00007f387f16f700(0000) GS:ffff909636b00000(0000) knlGS:0000000000000000 [78912.410285] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [78912.410673] CR2: 00007f429fc87cbc CR3: 000000014440a004 CR4: 00000000003606e0 [78912.411095] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [78912.411496] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [78912.411898] Call Trace: [78912.412318] __btrfs_end_transaction+0x5b/0x1c0 [btrfs] [78912.412746] btrfs_inc_block_group_ro+0xcf/0x160 [btrfs] [78912.413179] scrub_enumerate_chunks+0x188/0x5b0 [btrfs] [78912.413622] ? __mutex_unlock_slowpath+0x100/0x2a0 [78912.414078] btrfs_scrub_dev+0x2ef/0x720 [btrfs] [78912.414535] ? __sb_start_write+0xd4/0x1c0 [78912.414963] ? mnt_want_write_file+0x24/0x50 [78912.415403] btrfs_ioctl+0x17fb/0x3120 [btrfs] [78912.415832] ? lock_acquire+0xa6/0x190 [78912.416256] ? do_vfs_ioctl+0xa2/0x6f0 [78912.416685] ? btrfs_ioctl_get_supported_features+0x30/0x30 [btrfs] [78912.417116] do_vfs_ioctl+0xa2/0x6f0 [78912.417534] ? __fget+0x113/0x200 [78912.417954] ksys_ioctl+0x70/0x80 [78912.418369] __x64_sys_ioctl+0x16/0x20 [78912.418812] do_syscall_64+0x60/0x1b0 [78912.419231] entry_SYSCALL_64_after_hwframe+0x49/0xbe [78912.419644] RIP: 0033:0x7f3880252dd7 (...) [78912.420957] RSP: 002b:00007f387f16ed68 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [78912.421426] RAX: ffffffffffffffda RBX: 000055f5becc1df0 RCX: 00007f3880252dd7 [78912.421889] RDX: 000055f5becc1df0 RSI: 00000000c400941b RDI: 0000000000000003 [78912.422354] RBP: 0000000000000000 R08: 00007f387f16f700 R09: 0000000000000000 [78912.422790] R10: 00007f387f16f700 R11: 0000000000000246 R12: 0000000000000000 [78912.423202] R13: 00007ffda49c266f R14: 0000000000000000 R15: 00007f388145e040 [78912.425505] ---[ end trace eb9bfe7c426fc4d3 ]--- Fix this by calling remove_extent_mapping(), at btrfs_remove_block_group(), only at the very end, after removing the block group item key from the extent tree (and removing the free space tree entry if we are using the free space tree feature). Fixes: 04216820fe83d5 ("Btrfs: fix race between fs trimming and block group remove/allocation") CC: [email protected] # 4.4+ Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-06-12clocksource/drivers/arm_arch_timer: Don't trace count reader functionsJulien Thierry1-4/+4
With v5.2-rc1, The ftrace functions_graph tracer locks up whenever it is enabled on arm64. Since commit 0ea415390cd3 ("clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters") a function pointer is consistently used to read the counter instead of potentially referencing an inlinable function. The graph tracers relies on accessing the timer counters to compute the time spent in functions which causes the lockup when attempting to trace these code paths. Annotate the arm arch timer counter accessors as notrace. Fixes: 0ea415390cd3 ("clocksource/arm_arch_timer: Use arch_timer_read_counter to access stable counters") Signed-off-by: Julien Thierry <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Daniel Lezcano <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Steven Rostedt <[email protected]> Acked-by: Marc Zyngier <[email protected]> Signed-off-by: Daniel Lezcano <[email protected]>
2019-06-12i2c: pca-platform: Fix GPIO lookup codeLinus Walleij1-2/+1
The devm_gpiod_request_gpiod() call will add "-gpios" to any passed connection ID before looking it up. I do not think the reset GPIO on this platform is named "reset-gpios-gpios" but rather "reset-gpios" in the device tree, so fix this up so that we get a proper reset GPIO handle. Also drop the inclusion of the legacy GPIO header. Fixes: 0e8ce93bdceb ("i2c: pca-platform: add devicetree awareness") Signed-off-by: Linus Walleij <[email protected]> Reviewed-by: Chris Packham <[email protected]> Signed-off-by: Wolfram Sang <[email protected]>
2019-06-12drm: add fallback override/firmware EDID modes workaroundJani Nikula3-0/+38
We've moved the override and firmware EDID (simply "override EDID" from now on) handling to the low level drm_do_get_edid() function in order to transparently use the override throughout the stack. The idea is that you get the override EDID via the ->get_modes() hook. Unfortunately, there are scenarios where the DDC probe in drm_get_edid() called via ->get_modes() fails, although the preceding ->detect() succeeds. In the case reported by Paul Wise, the ->detect() hook, intel_crt_detect(), relies on hotplug detect, bypassing the DDC. In the case reported by Ilpo Järvinen, there is no ->detect() hook, which is interpreted as connected. The subsequent DDC probe reached via ->get_modes() fails, and we don't even look at the override EDID, resulting in no modes being added. Because drm_get_edid() is used via ->detect() all over the place, we can't trivially remove the DDC probe, as it leads to override EDID effectively meaning connector forcing. The goal is that connector forcing and override EDID remain orthogonal. Generally, the underlying problem here is the conflation of ->detect() and ->get_modes() via drm_get_edid(). The former should just detect, and the latter should just get the modes, typically via reading the EDID. As long as drm_get_edid() is used in ->detect(), it needs to retain the DDC probe. Or such users need to have a separate DDC probe step first. The EDID caching between ->detect() and ->get_modes() done by some drivers is a further complication that prevents us from making drm_do_get_edid() adapt to the two cases. Work around the regression by falling back to a separate attempt at getting the override EDID at drm_helper_probe_single_connector_modes() level. With a working DDC and override EDID, it'll never be called; the override EDID will come via ->get_modes(). There will still be a failing DDC probe attempt in the cases that require the fallback. v2: - Call drm_connector_update_edid_property (Paul) - Update commit message about EDID caching (Daniel) Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107583 Reported-by: Paul Wise <[email protected]> Cc: Paul Wise <[email protected]> References: http://mid.mail-archive.com/[email protected] Reported-by: Ilpo Järvinen <[email protected]> Cc: Ilpo Järvinen <[email protected]> Suggested-by: Daniel Vetter <[email protected]> References: 15f080f08d48 ("drm/edid: respect connector force for drm_get_edid ddc probe") Fixes: 53fd40a90f3c ("drm: handle override and firmware EDID at drm_do_get_edid() level") Cc: <[email protected]> # v4.15+ 56a2b7f2a39a drm/edid: abstract override/firmware EDID retrieval Cc: <[email protected]> # v4.15+ Cc: Daniel Vetter <[email protected]> Cc: Ville Syrjälä <[email protected]> Cc: Harish Chegondi <[email protected]> Tested-by: Paul Wise <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-12i2c: acorn: fix i2c warningRussell King1-0/+1
The Acorn i2c driver (for RiscPC) triggers the "i2c adapter has no name" warning in the I2C core driver, resulting in the RTC being inaccessible. Fix this. Fixes: 2236baa75f70 ("i2c: Sanity checks on adapter registration") Signed-off-by: Russell King <[email protected]> Signed-off-by: Wolfram Sang <[email protected]> Cc: [email protected]
2019-06-12arm64: Don't unconditionally add -Wno-psabi to KBUILD_CFLAGSNathan Chancellor1-1/+1
This is a GCC only option, which warns about ABI changes within GCC, so unconditionally adding it breaks Clang with tons of: warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option] and link time failures: ld.lld: error: undefined symbol: __efistub___stack_chk_guard >>> referenced by arm-stub.c:73 (/home/nathan/cbl/linux/drivers/firmware/efi/libstub/arm-stub.c:73) >>> arm-stub.stub.o:(__efistub_install_memreserve_table) in archive ./drivers/firmware/efi/libstub/lib.a These failures come from the lack of -fno-stack-protector, which is added via cc-option in drivers/firmware/efi/libstub/Makefile. When an unknown flag is added to KBUILD_CFLAGS, clang will noisily warn that it is ignoring the option like above, unlike gcc, who will just error. $ echo "int main() { return 0; }" > tmp.c $ clang -Wno-psabi tmp.c; echo $? warning: unknown warning option '-Wno-psabi' [-Wunknown-warning-option] 1 warning generated. 0 $ gcc -Wsometimes-uninitialized tmp.c; echo $? gcc: error: unrecognized command line option ‘-Wsometimes-uninitialized’; did you mean ‘-Wmaybe-uninitialized’? 1 For cc-option to work properly with clang and behave like gcc, -Werror is needed, which was done in commit c3f0d0bc5b01 ("kbuild, LLVMLinux: Add -Werror to cc-option to support clang"). $ clang -Werror -Wno-psabi tmp.c; echo $? error: unknown warning option '-Wno-psabi' [-Werror,-Wunknown-warning-option] 1 As a consequence of this, when an unknown flag is unconditionally added to KBUILD_CFLAGS, it will cause cc-option to always fail and those flags will never get added: $ clang -Werror -Wno-psabi -fno-stack-protector tmp.c; echo $? error: unknown warning option '-Wno-psabi' [-Werror,-Wunknown-warning-option] 1 This can be seen when compiling the whole kernel as some warnings that are normally disabled (see below) show up. The full list of flags missing from drivers/firmware/efi/libstub are the following (gathered from diffing .arm64-stub.o.cmd): -fno-delete-null-pointer-checks -Wno-address-of-packed-member -Wframe-larger-than=2048 -Wno-unused-const-variable -fno-strict-overflow -fno-merge-all-constants -fno-stack-check -Werror=date-time -Werror=incompatible-pointer-types -ffreestanding -fno-stack-protector Use cc-disable-warning so that it gets disabled for GCC and does nothing for Clang. Fixes: ebcc5928c5d9 ("arm64: Silence gcc warnings about arch ABI drift") Link: https://github.com/ClangBuiltLinux/linux/issues/511 Reported-by: Qian Cai <[email protected]> Acked-by: Dave Martin <[email protected]> Reviewed-by: Nick Desaulniers <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Signed-off-by: Will Deacon <[email protected]>
2019-06-12drm/edid: abstract override/firmware EDID retrievalJani Nikula1-8/+17
Abstract the debugfs override and the firmware EDID retrieval function. We'll be needing it in the follow-up. No functional changes. Cc: Daniel Vetter <[email protected]> Cc: Harish Chegondi <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Tested-by: Tested-by: Paul Wise <[email protected]> Signed-off-by: Jani Nikula <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-06-12platform/mellanox: mlxreg-hotplug: Add devm_free_irq call to remove flowVadim Pasternak1-0/+1
Add devm_free_irq() call to mlxreg-hotplug remove() for clean release of devices irq resource. Fix debugobjects warning triggered by rmmod It prevents of use-after-free memory, related to mlxreg_hotplug_work_handler. Issue has been reported as debugobjects warning triggered by 'rmmod mlxtreg-hotplug' flow, while running kernel with CONFIG_DEBUG_OBJECTS* options. [ 2489.623551] ODEBUG: free active (active state 0) object type: work_struct hint: mlxreg_hotplug_work_handler+0x0/0x7f0 [mlxreg_hotplug] [ 2489.637097] WARNING: CPU: 5 PID: 3924 at lib/debugobjects.c:328 debug_print_object+0xfe/0x180 [ 2489.637165] RIP: 0010:debug_print_object+0xfe/0x180 ? [ 2489.637214] Call Trace: [ 2489.637225] __debug_check_no_obj_freed+0x25e/0x320 [ 2489.637231] kfree+0x82/0x110 [ 2489.637238] release_nodes+0x33c/0x4e0 [ 2489.637242] ? devres_remove_group+0x1b0/0x1b0 [ 2489.637247] device_release_driver_internal+0x146/0x270 [ 2489.637251] driver_detach+0x73/0xe0 [ 2489.637254] bus_remove_driver+0xa1/0x170 [ 2489.637261] __x64_sys_delete_module+0x29e/0x320 [ 2489.637265] ? __ia32_sys_delete_module+0x320/0x320 [ 2489.637268] ? blkcg_exit_queue+0x20/0x20 [ 2489.637273] ? task_work_run+0x7d/0x100 [ 2489.637278] ? exit_to_usermode_loop+0x5b/0xf0 [ 2489.637281] do_syscall_64+0x73/0x160 [ 2489.637287] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 2489.637290] RIP: 0033:0x7f95c3596fd7 The difference in release flow with and with no devm_free_irq is listed below: bus: 'platform': remove driver mlxreg-hotplug mlxreg_hotplug_remove(start) -> devm_free_irq (with new code) mlxreg_hotplug_remove (end) release_nodes (start) mlxreg-hotplug: DEVRES REL devm_hwmon_release (8 bytes) device: 'hwmon3': device_unregister PM: Removing info for No Bus:hwmon3 mlxreg-hotplug: DEVRES REL devm_kzalloc_release (88 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (6 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (5 bytes) mlxreg-hotplug: DEVRES REL devm_irq_release (16 bytes) (no new code) mlxreg-hotplug: DEVRES REL devm_kzalloc_release (1376 bytes) ------------[ cut here ]------------ (no new code): ODEBUG: free active (active state 0) object type: work_struct hint: mlxreg_hotplug_work_handler release_nodes(end) driver: 'mlxreg-hotplug': driver_release Fixes: 1f976f6978bf ("platform/x86: Move Mellanox platform hotplug driver to platform/mellanox") Signed-off-by: Vadim Pasternak <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2019-06-12platform/x86: mlx-platform: Fix parent device in i2c-mux-reg device registrationVadim Pasternak1-1/+1
Fix the issue found while running kernel with the option CONFIG_DEBUG_TEST_DRIVER_REMOVE. Driver 'mlx-platform' registers 'i2c_mlxcpld' device and then registers few underlying 'i2c-mux-reg' devices: priv->pdev_i2c = platform_device_register_simple("i2c_mlxcpld", nr, NULL, 0); ... for (i = 0; i < ARRAY_SIZE(mlxplat_mux_data); i++) { priv->pdev_mux[i] = platform_device_register_resndata( &mlxplat_dev->dev, "i2c-mux-reg", i, NULL, 0, &mlxplat_mux_data[i], sizeof(mlxplat_mux_data[i])); But actual parent of "i2c-mux-reg" device is priv->pdev_i2c->dev and not mlxplat_dev->dev. Patch fixes parent device parameter in a call to platform_device_register_resndata() for "i2c-mux-reg". It solves the race during initialization flow while 'i2c_mlxcpld.1' is removing after probe, while 'i2c-mux-reg.0' is still in probing flow: 'i2c_mlxcpld.1' flow: probe -> remove -> probe. 'i2c-mux-reg.0' flow: probe -> ... [ 12:621096] Registering platform device 'i2c_mlxcpld.1'. Parent at platform [ 12:621117] device: 'i2c_mlxcpld.1': device_add [ 12:621155] bus: 'platform': add device i2c_mlxcpld.1 [ 12:621384] Registering platform device 'i2c-mux-reg.0'. Parent at mlxplat [ 12:621395] device: 'i2c-mux-reg.0': device_add [ 12:621425] bus: 'platform': add device i2c-mux-reg.0 [ 12:621806] Registering platform device 'i2c-mux-reg.1'. Parent at mlxplat [ 12:621828] device: 'i2c-mux-reg.1': device_add [ 12:621892] bus: 'platform': add device i2c-mux-reg.1 [ 12:621906] bus: 'platform': add driver i2c_mlxcpld [ 12:621996] bus: 'platform': driver_probe_device: matched device i2c_mlxcpld.1 with driver i2c_mlxcpld [ 12:622003] bus: 'platform': really_probe: probing driver i2c_mlxcpld with device i2c_mlxcpld.1 [ 12:622100] i2c_mlxcpld i2c_mlxcpld.1: no default pinctrl state [ 12:622293] device: 'i2c-1': device_add [ 12:627280] bus: 'i2c': add device i2c-1 [ 12:627692] device: 'i2c-1': device_add [ 12.629639] bus: 'platform': add driver i2c-mux-reg [ 12.629718] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg [ 12.629723] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0 [ 12.629818] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state [ 12.629981] platform i2c-mux-reg.0: Driver i2c-mux-reg requests probe deferral [ 12.629986] platform i2c-mux-reg.0: Added to deferred list [ 12.629992] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.1 with driver i2c-mux-reg [ 12.629997] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.1 [ 12.630091] i2c-mux-reg i2c-mux-reg.1: no default pinctrl state [ 12.630247] platform i2c-mux-reg.1: Driver i2c-mux-reg requests probe deferral [ 12.630252] platform i2c-mux-reg.1: Added to deferred list [ 12.640892] devices_kset: Moving i2c-mux-reg.0 to end of list [ 12.640900] platform i2c-mux-reg.0: Retrying from deferred list [ 12.640911] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg [ 12.640919] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0 [ 12.640999] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state [ 12.641177] platform i2c-mux-reg.0: Driver i2c-mux-reg requests probe deferral [ 12.641187] platform i2c-mux-reg.0: Added to deferred list [ 12.641198] devices_kset: Moving i2c-mux-reg.1 to end of list [ 12.641219] platform i2c-mux-reg.1: Retrying from deferred list [ 12.641237] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.1 with driver i2c-mux-reg [ 12.641247] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.1 [ 12.641331] i2c-mux-reg i2c-mux-reg.1: no default pinctrl state [ 12.641465] platform i2c-mux-reg.1: Driver i2c-mux-reg requests probe deferral [ 12.641469] platform i2c-mux-reg.1: Added to deferred list [ 12.646427] device: 'i2c-1': device_add [ 12.646647] bus: 'i2c': add device i2c-1 [ 12.647104] device: 'i2c-1': device_add [ 12.669231] devices_kset: Moving i2c-mux-reg.0 to end of list [ 12.669240] platform i2c-mux-reg.0: Retrying from deferred list [ 12.669258] bus: 'platform': driver_probe_device: matched device i2c-mux-reg.0 with driver i2c-mux-reg [ 12.669263] bus: 'platform': really_probe: probing driver i2c-mux-reg with device i2c-mux-reg.0 [ 12.669343] i2c-mux-reg i2c-mux-reg.0: no default pinctrl state [ 12.669585] device: 'i2c-2': device_add [ 12.669795] bus: 'i2c': add device i2c-2 [ 12.670201] device: 'i2c-2': device_add [ 12.671427] i2c i2c-1: Added multiplexed i2c bus 2 [ 12.671514] device: 'i2c-3': device_add [ 12.671724] bus: 'i2c': add device i2c-3 [ 12.672136] device: 'i2c-3': device_add [ 12.673378] i2c i2c-1: Added multiplexed i2c bus 3 [ 12.673472] device: 'i2c-4': device_add [ 12.673676] bus: 'i2c': add device i2c-4 [ 12.674060] device: 'i2c-4': device_add [ 12.675861] i2c i2c-1: Added multiplexed i2c bus 4 [ 12.675941] device: 'i2c-5': device_add [ 12.676150] bus: 'i2c': add device i2c-5 [ 12.676550] device: 'i2c-5': device_add [ 12.678103] i2c i2c-1: Added multiplexed i2c bus 5 [ 12.678193] device: 'i2c-6': device_add [ 12.678395] bus: 'i2c': add device i2c-6 [ 12.678774] device: 'i2c-6': device_add [ 12.679969] i2c i2c-1: Added multiplexed i2c bus 6 [ 12.680065] device: 'i2c-7': device_add [ 12.680275] bus: 'i2c': add device i2c-7 [ 12.680913] device: 'i2c-7': device_add [ 12.682506] i2c i2c-1: Added multiplexed i2c bus 7 [ 12.682600] device: 'i2c-8': device_add [ 12.682808] bus: 'i2c': add device i2c-8 [ 12.683189] device: 'i2c-8': device_add [ 12.683907] device: 'i2c-1': device_unregister [ 12.683945] device: 'i2c-1': device_unregister [ 12.684387] device: 'i2c-1': device_create_release [ 12.684536] bus: 'i2c': remove device i2c-1 [ 12.686019] i2c i2c-8: Failed to create compatibility class link [ 12.686086] ------------[ cut here ]------------ [ 12.686087] can't create symlink to mux device [ 12.686224] Workqueue: events deferred_probe_work_func [ 12.686135] WARNING: CPU: 7 PID: 436 at drivers/i2c/i2c-mux.c:416 i2c_mux_add_adapter+0x729/0x7d0 [i2c_mux] [ 12.686232] RIP: 0010:i2c_mux_add_adapter+0x729/0x7d0 [i2c_mux] [ 0x190/0x190 [i2c_mux] [ 12.686300] ? i2c_mux_alloc+0xac/0x110 [i2c_mux] [ 12.686306] ? i2c_mux_reg_set+0x200/0x200 [i2c_mux_reg] [ 12.686313] i2c_mux_reg_probe+0x22c/0x731 [i2c_mux_reg] [ 12.686322] ? i2c_mux_reg_deselect+0x60/0x60 [i2c_mux_reg] [ 12.686346] platform_drv_probe+0xa8/0x110 [ 12.686351] really_probe+0x185/0x720 [ 12.686358] driver_probe_device+0xdf/0x1f0 ... [ 12.686522] i2c i2c-1: Added multiplexed i2c bus 8 [ 12.686621] device: 'i2c-9': device_add [ 12.686626] kobject_add_internal failed for i2c-9 (error: -2 parent: i2c-1) [ 12.694729] i2c-core: adapter 'i2c-1-mux (chan_id 8)': can't register device (-2) [ 12.705726] i2c i2c-1: failed to add mux-adapter 8 as bus 9 (error=-2) [ 12.714494] device: 'i2c-8': device_unregister [ 12.714537] device: 'i2c-8': device_unregister Fixes: 6613d18e9038 ("platform/x86: mlx-platform: Move module from arch/x86") Signed-off-by: Vadim Pasternak <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2019-06-12platform/x86: intel-vbtn: Report switch events when event wakes deviceMathew King1-2/+14
When a switch event, such as tablet mode/laptop mode or docked/undocked, wakes a device make sure that the value of the swich is reported. Without when a device is put in tablet mode from laptop mode when it is suspended or vice versa the device will wake up but mode will be incorrect. Tested by suspending a device in laptop mode and putting it in tablet mode, the device resumes and is in tablet mode. When suspending the device in tablet mode and putting it in laptop mode the device resumes and is in laptop mode. Signed-off-by: Mathew King <[email protected]> Reviewed-by: Jett Rink <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2019-06-12platform/x86: asus-wmi: Only Tell EC the OS will handle display hotkeys from ↵Hans de Goede3-1/+10
asus_nb_wmi Commit 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey") causes the backlight to be permanently off on various EeePC laptop models using the eeepc-wmi driver (Asus EeePC 1015BX, Asus EeePC 1025C). The asus_wmi_set_devstate(ASUS_WMI_DEVID_BACKLIGHT, 2, NULL) call added by that commit is made conditional in this commit and only enabled in the quirk_entry structs in the asus-nb-wmi driver fixing the broken display / backlight on various EeePC laptop models. Cc: João Paulo Rechi Vita <[email protected]> Fixes: 78f3ac76d9e5 ("platform/x86: asus-wmi: Tell the EC the OS will handle the display off hotkey") Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]>
2019-06-12ARM: mvebu_v7_defconfig: fix Ethernet on ClearfogJan Kundrát1-0/+1
Compared to kernel 5.0, patches merged for 5.1 added support for A38x' PHY guarded by a config option which was not enabled by default. As a result, there was no eth1 and eth2 on a Solid Run Clearfog Base. Ensure that A38x PHY is enabled on mvebu. [gregory: issue appeared in 5.1 not in 5.2 and added Fixes tag] Signed-off-by: Jan Kundrát <[email protected]> Cc: Baruch Siach <[email protected]> Cc: Gregory CLEMENT <[email protected]> Cc: Russell King <[email protected]> Cc: David S. Miller <[email protected]> Cc: Maxime Chevallier <[email protected]> Fixes: a10c1c8191e0 ("net: marvell: neta: add comphy support") Cc: [email protected] Signed-off-by: Gregory CLEMENT <[email protected]>
2019-06-12x86/resctrl: Prevent NULL pointer dereference when local MBM is disabledPrarit Bhargava1-0/+3
Booting with kernel parameter "rdt=cmt,mbmtotal,memlocal,l3cat,mba" and executing "mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl" results in a NULL pointer dereference on systems which do not have local MBM support enabled.. BUG: kernel NULL pointer dereference, address: 0000000000000020 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 722 Comm: kworker/0:3 Not tainted 5.2.0-0.rc3.git0.1.el7_UNSUPPORTED.x86_64 #2 Workqueue: events mbm_handle_overflow RIP: 0010:mbm_handle_overflow+0x150/0x2b0 Only enter the bandwith update loop if the system has local MBM enabled. Fixes: de73f38f7680 ("x86/intel_rdt/mba_sc: Feedback loop to dynamically update mem bandwidth") Signed-off-by: Prarit Bhargava <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: Reinette Chatre <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2019-06-12x86/resctrl: Don't stop walking closids when a locksetup group is foundJames Morse1-1/+6
When a new control group is created __init_one_rdt_domain() walks all the other closids to calculate the sets of used and unused bits. If it discovers a pseudo_locksetup group, it breaks out of the loop. This means any later closid doesn't get its used bits added to used_b. These bits will then get set in unused_b, and added to the new control group's configuration, even if they were marked as exclusive for a later closid. When encountering a pseudo_locksetup group, we should continue. This is because "a resource group enters 'pseudo-locked' mode after the schemata is written while the resource group is in 'pseudo-locksetup' mode." When we find a pseudo_locksetup group, its configuration is expected to be overwritten, we can skip it. Fixes: dfe9674b04ff6 ("x86/intel_rdt: Enable entering of pseudo-locksetup mode") Signed-off-by: James Morse <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Reinette Chatre <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: H Peter Avin <[email protected]> Cc: <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2019-06-12iommu/arm-smmu: Avoid constant zero in TLBI writesRobin Murphy1-3/+12
Apparently, some Qualcomm arm64 platforms which appear to expose their SMMU global register space are still, in fact, using a hypervisor to mediate it by trapping and emulating register accesses. Sadly, some deployed versions of said trapping code have bugs wherein they go horribly wrong for stores using r31 (i.e. XZR/WZR) as the source register. While this can be mitigated for GCC today by tweaking the constraints for the implementation of writel_relaxed(), to avoid any potential arms race with future compilers more aggressively optimising register allocation, the simple way is to just remove all the problematic constant zeros. For the write-only TLB operations, the actual value is irrelevant anyway and any old nearby variable will provide a suitable GPR to encode. The one point at which we really do need a zero to clear a context bank happens before any of the TLB maintenance where crashes have been reported, so is apparently not a problem... :/ Reported-by: AngeloGioacchino Del Regno <[email protected]> Tested-by: Marc Gonzalez <[email protected]> Signed-off-by: Robin Murphy <[email protected]> Signed-off-by: Marc Gonzalez <[email protected]> Acked-by: Will Deacon <[email protected]> Cc: [email protected] Signed-off-by: Joerg Roedel <[email protected]>
2019-06-12drm/i915/perf: fix whitelist on Gen10+Lionel Landwerlin2-0/+2
Gen10 added an additional NOA_WRITE register (high bits) and we forgot to whitelist it for userspace. Fixes: 95690a02fb5d96 ("drm/i915/perf: enable perf support on CNL") Signed-off-by: Lionel Landwerlin <[email protected]> Reviewed-by: Kenneth Graunke <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit bf210f6c9e6fd8dc0d154ad18f741f20e64a3fce) Signed-off-by: Jani Nikula <[email protected]>
2019-06-12drm/i915/sdvo: Implement proper HDMI audio support for SDVOVille Syrjälä2-11/+50
Our SDVO audio support is pretty bogus. We can't push audio over the SDVO bus, so trying to enable audio in the SDVO control register doesn't do anything. In fact it looks like the SDVO encoder will always mix in the audio coming over HDA, and there's no (at least documented) way to disable that from our side. So HDMI audio does work currently on gen4 but only by luck really. On gen3 it got broken by the referenced commit. And what has always been missing on every platform is the ELD. To pass the ELD to the audio driver we need to write it to magic buffer in the SDVO encoder hardware which then gets pulled out via HDA in the other end. Ie. pretty much the same thing we had for native HDMI before we started to just pass the ELD between the drivers. This sort of explains why we even have that silly hardware buffer with native HDMI. $ cat /proc/asound/card0/eld#1.0 -monitor_present 0 -eld_valid 0 +monitor_present 1 +eld_valid 1 +monitor_name LG TV +connection_type HDMI +... This also fixes our state readout since we can now query the SDVO encoder about the state of the "ELD valid" and "presence detect" bits. As mentioned those don't actually control whether audio gets sent over the HDMI cable, but it's the best we can do. And with the state checker appeased we can re-enable HDMI audio for gen3. Cc: [email protected] Cc: Daniel Vetter <[email protected]> Cc: [email protected] Tested-by: [email protected] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108976 Fixes: de44e256b92c ("drm/i915/sdvo: Shut up state checker with hdmi cards on gen3") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Imre Deak <[email protected]> (cherry picked from commit dc49a56bd43bb04982e64b44436831da801d0237) Signed-off-by: Jani Nikula <[email protected]>
2019-06-12drm/i915: Fix per-pixel alpha with CCSVille Syrjälä1-4/+8
We forgot to set .has_alpha=true for the A+CCS formats when the code started to consult .has_alpha. This manifests as A+CCS being treated as X+CCS which means no per-pixel alpha blending. Fix the format list appropriately. Cc: [email protected] Cc: Maarten Lankhorst <[email protected]> Cc: Matt Roper <[email protected]> Cc: Heinrich Fink <[email protected]> Reported-by: Heinrich Fink <[email protected]> Tested-by: Heinrich Fink <[email protected]> Fixes: b20815255693 ("drm/i915: Add plane alpha blending support, v2.") Signed-off-by: Ville Syrjälä <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Reviewed-by: Maarten Lankhorst <[email protected]> (cherry picked from commit 38f300410f3e15b6fec76c8d8baed7111b5ea4e4) Signed-off-by: Jani Nikula <[email protected]>
2019-06-12drm/i915/dmc: protect against reading random memoryLucas De Marchi1-0/+18
While loading the DMC firmware we were double checking the headers made sense, but in no place we checked that we were actually reading memory we were supposed to. This could be wrong in case the firmware file is truncated or malformed. Before this patch: # ls -l /lib/firmware/i915/icl_dmc_ver1_07.bin -rw-r--r-- 1 root root 25716 Feb 1 12:26 icl_dmc_ver1_07.bin # truncate -s 25700 /lib/firmware/i915/icl_dmc_ver1_07.bin # modprobe i915 # dmesg| grep -i dmc [drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin [drm] Finished loading DMC firmware i915/icl_dmc_ver1_07.bin (v1.7) i.e. it loads random data. Now it fails like below: [drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin [drm:csr_load_work_fn [i915]] *ERROR* Truncated DMC firmware, rejecting. i915 0000:00:02.0: Failed to load DMC firmware i915/icl_dmc_ver1_07.bin. Disabling runtime power management. i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915 Before reading any part of the firmware file, validate the input first. Fixes: eb805623d8b1 ("drm/i915/skl: Add support to load SKL CSR firmware.") Cc: [email protected] Signed-off-by: Lucas De Marchi <[email protected]> Reviewed-by: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit bc7b488b1d1c71dc4c5182206911127bc6c410d6) Signed-off-by: Jani Nikula <[email protected]>
2019-06-12drm/i915/dsi: Use a fuzzy check for burst mode clock checkHans de Goede3-1/+13
Prior to this commit we fail to init the DSI panel on the GPD MicroPC: https://www.indiegogo.com/projects/gpd-micropc-6-inch-handheld-industry-laptop#/ The problem is intel_dsi_vbt_init() failing with the following error: *ERROR* Burst mode freq is less than computed The pclk in the VBT panel modeline is 70000, together with 24 bpp and 4 lines this results in a bitrate value of 70000 * 24 / 4 = 420000. But the target_burst_mode_freq in the VBT is 418000. This commit works around this problem by adding an intel_fuzzy_clock_check when target_burst_mode_freq < bitrate and setting target_burst_mode_freq to bitrate when that checks succeeds, fixing the panel not working. Cc: [email protected] Reviewed-by: Ville Syrjälä <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 2c1c55252647abd989b94f725b190c700312d053) Signed-off-by: Jani Nikula <[email protected]>
2019-06-11Merge branch 'for-linus' of ↵Linus Torvalds2-2/+27
git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace Pull ptrace fixes from Eric Biederman: "This is just two very minor fixes: - prevent ptrace from reading unitialized kernel memory found twice by syzkaller - restore a missing smp_rmb in ptrace_may_access and add comment tp it so it is not removed by accident again. Apologies for being a little slow about getting this to you, I am still figuring out how to develop with a little baby in the house" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: ptrace: restore smp_rmb() in __ptrace_may_access() signal/ptrace: Don't leak unitialized kernel memory with PTRACE_PEEK_SIGINFO
2019-06-11Merge branch 'stable/for-linus-5.2' of ↵Linus Torvalds1-1/+11
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb Pull swiotlb fix from Konrad Rzeszutek Wilk: "One tiny fix for ARM64 where we could allocate the SWIOTLB twice" * 'stable/for-linus-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/swiotlb: xen/swiotlb: don't initialize swiotlb twice on arm64
2019-06-11Merge tag 'vfio-v5.2-rc5' of git://github.com/awilliam/linux-vfioLinus Torvalds3-77/+69
Pull VFIO fixes from Alex Williamson: "Fix mdev device create/remove paths to provide initialized device for parent driver create callback and correct ordering of device removal from bus prior to initiating removal by parent. Also resolve races between parent removal and device create/remove paths (all from Parav Pandit)" * tag 'vfio-v5.2-rc5' of git://github.com/awilliam/linux-vfio: vfio/mdev: Synchronize device create/remove with parent removal vfio/mdev: Avoid creating sysfs remove file on stale device removal vfio/mdev: Improve the create/remove sequence
2019-06-11Merge tag 'for-5.2-rc4-tag' of ↵Linus Torvalds1-25/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fix from David Sterba: "One regression fix to TRIM ioctl. The range cannot be used as its meaning can be confusing regarding physical and logical addresses. This confusion in code led to potential corruptions when the range overlapped data. The original patch made it to several stable kernels and was promptly reverted, the version for master branch is different due to additional changes but the change is effectively the same" * tag 'for-5.2-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: Always trim all unallocated space in btrfs_trim_free_extents
2019-06-11Input: imx_keypad - make sure keyboard can always wake up systemAnson Huang1-4/+14
There are several scenarios that keyboard can NOT wake up system from suspend, e.g., if a keyboard is depressed between system device suspend phase and device noirq suspend phase, the keyboard ISR will be called and both keyboard depress and release interrupts will be disabled, then keyboard will no longer be able to wake up system. Another scenario would be, if a keyboard is kept depressed, and then system goes into suspend, the expected behavior would be when keyboard is released, system will be waked up, but current implementation can NOT achieve that, because both depress and release interrupts are disabled in ISR, and the event check is still in progress. To fix these issues, need to make sure keyboard's depress or release interrupt is enabled after noirq device suspend phase, this patch moves the suspend/resume callback to noirq suspend/resume phase, and enable the corresponding interrupt according to current keyboard status. Signed-off-by: Anson Huang <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2019-06-11selinux: log raw contexts as untrusted stringsOndrej Mosnacek1-2/+8
These strings may come from untrusted sources (e.g. file xattrs) so they need to be properly escaped. Reproducer: # setenforce 0 # touch /tmp/test # setfattr -n security.selinux -v 'kuřecí řízek' /tmp/test # runcon system_u:system_r:sshd_t:s0 cat /tmp/test (look at the generated AVCs) Actual result: type=AVC [...] trawcon=kuřecí řízek Expected result: type=AVC [...] trawcon=6B75C5996563C3AD20C599C3AD7A656B Fixes: fede148324c3 ("selinux: log invalid contexts in AVCs") Cc: [email protected] # v5.1+ Signed-off-by: Ondrej Mosnacek <[email protected]> Acked-by: Richard Guy Briggs <[email protected]> Signed-off-by: Paul Moore <[email protected]>
2019-06-11ptrace: restore smp_rmb() in __ptrace_may_access()Jann Horn2-0/+19
Restore the read memory barrier in __ptrace_may_access() that was deleted a couple years ago. Also add comments on this barrier and the one it pairs with to explain why they're there (as far as I understand). Fixes: bfedb589252c ("mm: Add a user_ns owner to mm_struct and fix ptrace permission checks") Cc: [email protected] Acked-by: Kees Cook <[email protected]> Acked-by: Oleg Nesterov <[email protected]> Signed-off-by: Jann Horn <[email protected]> Signed-off-by: Eric W. Biederman <[email protected]>
2019-06-11Merge branch 'vxlan-geneve-linear'David S. Miller2-2/+2
Stefano Brivio says: ==================== Don't assume linear buffers in error handlers for VXLAN and GENEVE Guillaume noticed the same issue fixed by commit 26fc181e6cac ("fou, fou6: do not assume linear skbs") for fou and fou6 is also present in VXLAN and GENEVE error handlers: we can't assume linear buffers there, we need to use pskb_may_pull() instead. ==================== Acked-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-11geneve: Don't assume linear buffers in error handlerStefano Brivio1-1/+1
In commit a07966447f39 ("geneve: ICMP error lookup handler") I wrongly assumed buffers from icmp_socket_deliver() would be linear. This is not the case: icmp_socket_deliver() only guarantees we have 8 bytes of linear data. Eric fixed this same issue for fou and fou6 in commits 26fc181e6cac ("fou, fou6: do not assume linear skbs") and 5355ed6388e2 ("fou, fou6: avoid uninit-value in gue_err() and gue6_err()"). Use pskb_may_pull() instead of checking skb->len, and take into account the fact we later access the GENEVE header with udp_hdr(), so we also need to sum skb_transport_header() here. Reported-by: Guillaume Nault <[email protected]> Fixes: a07966447f39 ("geneve: ICMP error lookup handler") Signed-off-by: Stefano Brivio <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-11vxlan: Don't assume linear buffers in error handlerStefano Brivio1-1/+1
In commit c3a43b9fec8a ("vxlan: ICMP error lookup handler") I wrongly assumed buffers from icmp_socket_deliver() would be linear. This is not the case: icmp_socket_deliver() only guarantees we have 8 bytes of linear data. Eric fixed this same issue for fou and fou6 in commits 26fc181e6cac ("fou, fou6: do not assume linear skbs") and 5355ed6388e2 ("fou, fou6: avoid uninit-value in gue_err() and gue6_err()"). Use pskb_may_pull() instead of checking skb->len, and take into account the fact we later access the VXLAN header with udp_hdr(), so we also need to sum skb_transport_header() here. Reported-by: Guillaume Nault <[email protected]> Fixes: c3a43b9fec8a ("vxlan: ICMP error lookup handler") Signed-off-by: Stefano Brivio <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-11net: openvswitch: do not free vport if register_netdevice() is failed.Taehee Yoo1-6/+12
In order to create an internal vport, internal_dev_create() is used and that calls register_netdevice() internally. If register_netdevice() fails, it calls dev->priv_destructor() to free private data of netdev. actually, a private data of this is a vport. Hence internal_dev_create() should not free and use a vport after failure of register_netdevice(). Test command ovs-dpctl add-dp bonding_masters Splat looks like: [ 1035.667767] kasan: GPF could be caused by NULL-ptr deref or user memory access [ 1035.675958] general protection fault: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN PTI [ 1035.676916] CPU: 1 PID: 1028 Comm: ovs-vswitchd Tainted: G B 5.2.0-rc3+ #240 [ 1035.676916] RIP: 0010:internal_dev_create+0x2e5/0x4e0 [openvswitch] [ 1035.676916] Code: 48 c1 ea 03 80 3c 02 00 0f 85 9f 01 00 00 4c 8b 23 48 b8 00 00 00 00 00 fc ff df 49 8d bc 24 60 05 00 00 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 86 01 00 00 49 8b bc 24 60 05 00 00 e8 e4 68 f4 [ 1035.713720] RSP: 0018:ffff88810dcb7578 EFLAGS: 00010206 [ 1035.713720] RAX: dffffc0000000000 RBX: ffff88810d13fe08 RCX: ffffffff84297704 [ 1035.713720] RDX: 00000000000000ac RSI: 0000000000000000 RDI: 0000000000000560 [ 1035.713720] RBP: 00000000ffffffef R08: fffffbfff0d3b881 R09: fffffbfff0d3b881 [ 1035.713720] R10: 0000000000000001 R11: fffffbfff0d3b880 R12: 0000000000000000 [ 1035.768776] R13: 0000607ee460b900 R14: ffff88810dcb7690 R15: ffff88810dcb7698 [ 1035.777709] FS: 00007f02095fc980(0000) GS:ffff88811b400000(0000) knlGS:0000000000000000 [ 1035.777709] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1035.777709] CR2: 00007ffdf01d2f28 CR3: 0000000108258000 CR4: 00000000001006e0 [ 1035.777709] Call Trace: [ 1035.777709] ovs_vport_add+0x267/0x4f0 [openvswitch] [ 1035.777709] new_vport+0x15/0x1e0 [openvswitch] [ 1035.777709] ovs_vport_cmd_new+0x567/0xd10 [openvswitch] [ 1035.777709] ? ovs_dp_cmd_dump+0x490/0x490 [openvswitch] [ 1035.777709] ? __kmalloc+0x131/0x2e0 [ 1035.777709] ? genl_family_rcv_msg+0xa54/0x1030 [ 1035.777709] genl_family_rcv_msg+0x63a/0x1030 [ 1035.777709] ? genl_unregister_family+0x630/0x630 [ 1035.841681] ? debug_show_all_locks+0x2d0/0x2d0 [ ... ] Fixes: cf124db566e6 ("net: Fix inconsistent teardown and release of private netdev state.") Signed-off-by: Taehee Yoo <[email protected]> Reviewed-by: Greg Rose <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-11net: correct udp zerocopy refcnt also when zerocopy only on appendWillem de Bruijn2-2/+2
The below patch fixes an incorrect zerocopy refcnt increment when appending with MSG_MORE to an existing zerocopy udp skb. send(.., MSG_ZEROCOPY | MSG_MORE); // refcnt 1 send(.., MSG_ZEROCOPY | MSG_MORE); // refcnt still 1 (bar frags) But it missed that zerocopy need not be passed at the first send. The right test whether the uarg is newly allocated and thus has extra refcnt 1 is not !skb, but !skb_zcopy. send(.., MSG_MORE); // <no uarg> send(.., MSG_ZEROCOPY); // refcnt 1 Fixes: 100f6d8e09905 ("net: correct zerocopy refcnt with udp MSG_MORE") Reported-by: syzbot <[email protected]> Signed-off-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-06-11drm/amdgpu/{uvd,vcn}: fetch ring's read_ptr after allocShirish S3-3/+11
[What] readptr read always returns zero, since most likely these blocks are either power or clock gated. [How] fetch rptr after amdgpu_ring_alloc() which informs the power management code that the block is about to be used and hence the gating is turned off. Signed-off-by: Louis Li <[email protected]> Signed-off-by: Shirish S <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2019-06-11ovl: fix wrong flags check in FS_IOC_FS[SG]ETXATTR ioctlsAmir Goldstein1-26/+65
The ioctl argument was parsed as the wrong type. Fixes: b21d9c435f93 ("ovl: support the FS_IOC_FS[SG]ETXATTR ioctls") Signed-off-by: Amir Goldstein <[email protected]> Signed-off-by: Miklos Szeredi <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.