aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2016-07-06MIPS: Fix page table corruption on THP permission changes.David Daney1-1/+1
When the core THP code is modifying the permissions of a huge page it calls pmd_modify(), which unfortunately was clearing the _PAGE_HUGE bit of the page table entry. The result can be kernel messages like: mm/memory.c:397: bad pmd 000000040080004d. mm/memory.c:397: bad pmd 00000003ff00004d. mm/memory.c:397: bad pmd 000000040100004d. or: ------------[ cut here ]------------ WARNING: at mm/mmap.c:3200 exit_mmap+0x150/0x158() Modules linked in: ipv6 at24 octeon3_ethernet octeon_srio_nexus m25p80 CPU: 12 PID: 1295 Comm: pmderr Not tainted 3.10.87-rt80-Cavium-Octeon #4 Stack : 0000000040808000 0000000014009ce1 0000000000400004 ffffffff81076ba0 0000000000000000 0000000000000000 ffffffff85110000 0000000000000119 0000000000000004 0000000000000000 0000000000000119 43617669756d2d4f 0000000000000000 ffffffff850fda40 ffffffff85110000 0000000000000000 0000000000000000 0000000000000009 ffffffff809207a0 0000000000000c80 ffffffff80f1bf20 0000000000000001 000000ffeca36828 0000000000000001 0000000000000000 0000000000000001 000000ffeca7e700 ffffffff80886924 80000003fd7a0000 80000003fd7a39b0 80000003fdea8000 ffffffff80885780 80000003fdea8000 ffffffff80f12218 000000000000000c 000000000000050f 0000000000000000 ffffffff80865c4c 0000000000000000 0000000000000000 ... Call Trace: [<ffffffff80865c4c>] show_stack+0x6c/0xf8 [<ffffffff80885780>] warn_slowpath_common+0x78/0xa8 [<ffffffff809207a0>] exit_mmap+0x150/0x158 [<ffffffff80882d44>] mmput+0x5c/0x110 [<ffffffff8088b450>] do_exit+0x230/0xa68 [<ffffffff8088be34>] do_group_exit+0x54/0x1d0 [<ffffffff8088bfc0>] __wake_up_parent+0x0/0x18 ---[ end trace c7b38293191c57dc ]--- BUG: Bad rss-counter state mm:80000003fa168000 idx:1 val:1536 Fix by not clearing _PAGE_HUGE bit. Signed-off-by: David Daney <[email protected]> Tested-by: Aaro Koskinen <[email protected]> Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/13687/ Signed-off-by: Ralf Baechle <[email protected]>
2016-07-06x86/perf/intel/rapl: Fix module name collision with powercap intel-raplVille Syrjälä1-2/+2
Since commit 4b6e2571bf00 the rapl perf module calls itself intel-rapl. That name was already in use by the rapl powercap driver, which now fails to load if the perf module is loaded. Fix the problem by renaming the perf module to intel-rapl-perf, so that both modules can coexist. Fixes: 4b6e2571bf00 ("x86/perf/intel/rapl: Make the Intel RAPL PMU driver modular") Signed-off-by: Ville Syrjälä <[email protected]> Cc: Vince Weaver <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Kan Liang <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Jiri Olsa <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>
2016-07-05ipv6: Fix mem leak in rt6i_pcpuMartin KaFai Lau1-0/+1
It was first reported and reproduced by Petr (thanks!) in https://bugzilla.kernel.org/show_bug.cgi?id=119581 free_percpu(rt->rt6i_pcpu) used to always happen in ip6_dst_destroy(). However, after fixing a deadlock bug in commit 9c7370a166b4 ("ipv6: Fix a potential deadlock when creating pcpu rt"), free_percpu() is not called before setting non_pcpu_rt->rt6i_pcpu to NULL. It is worth to note that rt6i_pcpu is protected by table->tb6_lock. kmemleak somehow did not report it. We nailed it down by observing the pcpu entries in /proc/vmallocinfo (first suggested by Hannes, thanks!). Signed-off-by: Martin KaFai Lau <[email protected]> Fixes: 9c7370a166b4 ("ipv6: Fix a potential deadlock when creating pcpu rt") Reported-by: Petr Novopashenniy <[email protected]> Tested-by: Petr Novopashenniy <[email protected]> Acked-by: Hannes Frederic Sowa <[email protected]> Cc: Hannes Frederic Sowa <[email protected]> Cc: Petr Novopashenniy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-07-05net: fix decnet rtnexthop parsingVegard Nossum1-9/+12
dn_fib_count_nhs() could enter an infinite loop if nhp->rtnh_len == 0 (i.e. if userspace passes a malformed netlink message). Let's use the helpers from net/nexthop.h which take care of all this stuff. We can do exactly the same as e.g. fib_count_nexthops() and fib_get_nhs() from net/ipv4/fib_semantics.c. This fixes the softlockup for me. Cc: Thomas Graf <[email protected]> Signed-off-by: Vegard Nossum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-07-05ACPI / debugger: Fix regression introduced by IS_ERR_VALUE() removalLv Zheng1-2/+2
The FIFO unlocking mechanism in acpi_dbg has been broken by the following commit: Commit: 287980e49ffc0f6d911601e7e352a812ed27768e Subject: remove lots of IS_ERR_VALUE abuses It converted !IS_ERR_VALUE(ret) into !ret which was not entirely correct. Fix the regression by taking ret > 0 into account too as appropriate. Fixes: 287980e49ffc (remove lots of IS_ERR_VALUE abuses) Signed-off-by: Lv Zheng <[email protected]> [ rjw: Simplifications, changelog & subject massage ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2016-07-05platform/chrome: cros_ec_dev - double fetch bug in ioctlDan Carpenter1-1/+7
We verify "u_cmd.outsize" and "u_cmd.insize" but we need to make sure that those values have not changed between the two copy_from_user() calls. Otherwise it could lead to a buffer overflow. Additionally, cros_ec_cmd_xfer() can set s_cmd->insize to a lower value. We should use the new smaller value so we don't copy too much data to the user. Reported-by: Pengfei Wang <[email protected]> Fixes: a841178445bb ('mfd: cros_ec: Use a zero-length array for command data') Signed-off-by: Dan Carpenter <[email protected]> Reviewed-by: Kees Cook <[email protected]> Tested-by: Gwendal Grignou <[email protected]> Cc: <[email protected]> # v4.2+ Signed-off-by: Olof Johansson <[email protected]>
2016-07-06drm/nouveau/disp/sor/gf119: select correct sor when poking training patternBen Skeggs1-1/+2
Fixes a regression caused by a stupid thinko from "disp/sor/gf119: both links use the same training register". Signed-off-by: Ben Skeggs <[email protected]> Cc: [email protected]
2016-07-05ACPICA: Namespace: Fix namespace/interpreter lock orderingLv Zheng2-8/+8
There is a lock order issue in acpi_load_tables(). The namespace lock is held before holding the interpreter lock. With ACPI_MUTEX_DEBUG enabled in the kernel, this is printed to the log during boot: [ 0.885699] ACPI Error: Invalid acquire order: Thread 405884224 owns [ACPI_MTX_Namespace], wants [ACPI_MTX_Interpreter] (20160422/utmutex-263) [ 0.885881] ACPI Error: Could not acquire AML Interpreter mutex (20160422/exutils-95) [ 0.893846] ACPI Error: Mutex [0x0] is not acquired, cannot release (20160422/utmutex-326) [ 0.894019] ACPI Error: Could not release AML Interpreter mutex (20160422/exutils-133) The issue has been introduced by the following commit: Commit: 2f38b1b16d9280689e5cfa47a4c50956bf437f0d ACPICA Commit: bfe03ffcde8ed56a7eae38ea0b188aeb12f9c52e Subject: ACPICA: Namespace: Fix a regression that MLC support triggers dead lock in dynamic table loading Which fixed a deadlock issue for acpi_ns_load_table() in acpi_ex_add_table() but didn't take care of the lock order in acpi_ns_load_table() correctly. Originally (before the above commit), ACPICA used the namespace/interpreter locks in the following 2 key code paths: 1. Table loading: acpi_ns_load_table L(Namespace) acpi_ns_parse_table acpi_ns_one_complete_parse U(Namespace) 2. Object evaluation: acpi_ns_evaluate L(Interpreter) acpi_ps_execute_method U(Interpreter) acpi_ns_load_table L(Namespace) U(Namespace) acpi_ev_initialize_region L(Namespace) U(Namespace) address_space.setup L(Namespace) U(Namespace) address_space.handler L(Namespace) U(Namespace) acpi_os_wait_semaphore acpi_os_acquire_mutex acpi_os_sleep L(Interpreter) U(Interpreter) During runtime, while acpi_ns_evaluate is called, the lock order is always Interpreter -> Namespace. In turn, the problematic commit acquires the locks in the following order: 3. Table loading: acpi_ns_load_table L(Namespace) acpi_ns_parse_table L(Interpreter) acpi_ns_one_complete_parse U(Interpreter) U(Namespace) To fix the lock order issue, move the interpreter lock to acpi_ns_load_table() to ensure the lock order correctness: 4. Table loading: acpi_ns_load_table L(Interpreter) L(Namespace) acpi_ns_parse_table acpi_ns_one_complete_parse U(Namespace) U(Interpreter) However, this doesn't fix the current design issues related to the namespace lock. For example, we can notice that in acpi_ns_evaluate(), outside of acpi_ns_load_table(), the namespace objects may be created by the named object creation control methods. And the creation of the method-owned namespace objects are not locked by the namespace lock. This patch doesn't try to fix such kind of existing issues. Fixes: 2f38b1b16d92 (ACPICA: Namespace: Fix a regression that MLC support triggers dead lock in dynamic table loading) Signed-off-by: Lv Zheng <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2016-07-05qla2xxx: Fix NULL pointer deref in QLA interruptBruno Prémont1-1/+1
In qla24xx_process_response_queue() rsp->msix->cpuid may trigger NULL pointer dereference when rsp->msix is NULL: [ 5.622457] NULL pointer dereference at 0000000000000050 [ 5.622457] IP: [<ffffffff8155e614>] qla24xx_process_response_queue+0x44/0x4b0 [ 5.622457] PGD 0 [ 5.622457] Oops: 0000 [#1] SMP [ 5.622457] Modules linked in: [ 5.622457] CPU: 2 PID: 0 Comm: swapper/2 Not tainted 4.6.3-x86_64 #1 [ 5.622457] Hardware name: HP ProLiant DL360 G5, BIOS P58 05/02/2011 [ 5.622457] task: ffff8801a88f3740 ti: ffff8801a8954000 task.ti: ffff8801a8954000 [ 5.622457] RIP: 0010:[<ffffffff8155e614>] [<ffffffff8155e614>] qla24xx_process_response_queue+0x44/0x4b0 [ 5.622457] RSP: 0000:ffff8801afb03de8 EFLAGS: 00010002 [ 5.622457] RAX: 0000000000000000 RBX: 0000000000000032 RCX: 00000000ffffffff [ 5.622457] RDX: 0000000000000002 RSI: ffff8801a79bf8c8 RDI: ffff8800c8f7e7c0 [ 5.622457] RBP: ffff8801afb03e68 R08: 0000000000000000 R09: 0000000000000000 [ 5.622457] R10: 00000000ffff8c47 R11: 0000000000000002 R12: ffff8801a79bf8c8 [ 5.622457] R13: ffff8800c8f7e7c0 R14: ffff8800c8f60000 R15: 0000000000018013 [ 5.622457] FS: 0000000000000000(0000) GS:ffff8801afb00000(0000) knlGS:0000000000000000 [ 5.622457] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 5.622457] CR2: 0000000000000050 CR3: 0000000001e07000 CR4: 00000000000006e0 [ 5.622457] Stack: [ 5.622457] ffff8801afb03e30 ffffffff810c0f2d 0000000000000086 0000000000000002 [ 5.622457] ffff8801afb03e28 ffffffff816570e1 ffff8800c8994628 0000000000000002 [ 5.622457] ffff8801afb03e60 ffffffff816772d4 b47c472ad6955e68 0000000000000032 [ 5.622457] Call Trace: [ 5.622457] <IRQ> [ 5.622457] [<ffffffff810c0f2d>] ? __wake_up_common+0x4d/0x80 [ 5.622457] [<ffffffff816570e1>] ? usb_hcd_resume_root_hub+0x51/0x60 [ 5.622457] [<ffffffff816772d4>] ? uhci_hub_status_data+0x64/0x240 [ 5.622457] [<ffffffff81560d00>] qla24xx_intr_handler+0xf0/0x2e0 [ 5.622457] [<ffffffff810d569e>] ? get_next_timer_interrupt+0xce/0x200 [ 5.622457] [<ffffffff810c89b4>] handle_irq_event_percpu+0x64/0x100 [ 5.622457] [<ffffffff810c8a77>] handle_irq_event+0x27/0x50 [ 5.622457] [<ffffffff810cb965>] handle_edge_irq+0x65/0x140 [ 5.622457] [<ffffffff8101a498>] handle_irq+0x18/0x30 [ 5.622457] [<ffffffff8101a276>] do_IRQ+0x46/0xd0 [ 5.622457] [<ffffffff817f8fff>] common_interrupt+0x7f/0x7f [ 5.622457] <EOI> [ 5.622457] [<ffffffff81020d38>] ? mwait_idle+0x68/0x80 [ 5.622457] [<ffffffff8102114a>] arch_cpu_idle+0xa/0x10 [ 5.622457] [<ffffffff810c1b97>] default_idle_call+0x27/0x30 [ 5.622457] [<ffffffff810c1d3b>] cpu_startup_entry+0x19b/0x230 [ 5.622457] [<ffffffff810324c6>] start_secondary+0x136/0x140 [ 5.622457] Code: 00 00 65 48 8b 04 25 28 00 00 00 48 89 45 d0 31 c0 48 8b 47 58 a8 02 0f 84 c5 00 00 00 48 8b 46 50 49 89 f4 65 8b 15 34 bb aa 7e <39> 50 50 74 11 89 50 50 48 8b 46 50 8b 40 50 41 89 86 60 8b 00 [ 5.622457] RIP [<ffffffff8155e614>] qla24xx_process_response_queue+0x44/0x4b0 [ 5.622457] RSP <ffff8801afb03de8> [ 5.622457] CR2: 0000000000000050 [ 5.622457] ---[ end trace fa2b19c25106d42b ]--- [ 5.622457] Kernel panic - not syncing: Fatal exception in interrupt The affected code was introduced by commit cdb898c52d1dfad4b4800b83a58b3fe5d352edde (qla2xxx: Add irq affinity notification). Only dereference rsp->msix when it has been set so the machine can boot fine. Possibly rsp->msix is unset because: [ 3.479679] qla2xxx [0000:00:00.0]-0005: : QLogic Fibre Channel HBA Driver: 8.07.00.33-k. [ 3.481839] qla2xxx [0000:13:00.0]-001d: : Found an ISP2432 irq 17 iobase 0xffffc90000038000. [ 3.484081] qla2xxx [0000:13:00.0]-0035:0: MSI-X; Unsupported ISP2432 (0x2, 0x3). [ 3.485804] qla2xxx [0000:13:00.0]-0037:0: Falling back-to MSI mode -258. [ 3.890145] scsi host0: qla2xxx [ 3.891956] qla2xxx [0000:13:00.0]-00fb:0: QLogic QLE2460 - PCI-Express Single Channel 4Gb Fibre Channel HBA. [ 3.894207] qla2xxx [0000:13:00.0]-00fc:0: ISP2432: PCIe (2.5GT/s x4) @ 0000:13:00.0 hdma+ host#=0 fw=7.03.00 (9496). [ 5.714774] qla2xxx [0000:13:00.0]-500a:0: LOOP UP detected (4 Gbps). Signed-off-by: Bruno Prémont <[email protected]> Acked-by: Quinn Tran <[email protected]> CC: <[email protected]> # 4.5+ Fixes: cdb898c52d1dfad4b4800b83a58b3fe5d352edde Signed-off-by: James Bottomley <[email protected]>
2016-07-05cxgb4: update latest firmware version supportedGanesh Goudar1-6/+6
Change t4fw_version.h to update latest firmware version number Signed-off-by: Ganesh Goudar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-07-05net/mlx5: Avoid setting unused var when modifying vport node GUIDOr Gerlitz1-3/+0
GCC complains on unused-but-set-variable, clean this up. Fixes: 23898c763f4a ('net/mlx5: E-Switch, Modify node guid on vf set MAC') Signed-off-by: Or Gerlitz <[email protected]> Acked-by: Saeed Mahameed <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-07-05bonding: fix enslavement slave link notificationsAviv Heller1-0/+1
Currently, link notifications are not sent by bond_set_slave_link_state() upon enslavement if the slave is enslaved when up. This happens because slave->link default init value is 0, which is the same as BOND_LINK_UP, resulting in bond_set_slave_link_state() ignoring this transition. This patch sets the default value of slave->link to BOND_LINK_NOCHANGE, assuring it will count as a state transition and thus trigger notification logic. Signed-off-by: Aviv Heller <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-07-05r8152: fix runtime function for RTL8152hayeswang1-7/+17
The RTL8152 doesn't have U1U2 and U2P3 features, so use different runtime functions for RTL812 and RTL8153 by adding autosuspend_en() to rtl_ops. Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-07-05Revert "gpio: gpiolib-of: Allow compile testing"Linus Walleij1-1/+1
This reverts commit 1e4a80640338924b9f9fd7a121ac31d08134410a. This creates more problems than it solves right now. Compile testing needs to go in with patches fixing the problems it uncovers. Signed-off-by: Linus Walleij <[email protected]>
2016-07-05irqchip/mips-gic: Match IPI IRQ domain by bus token onlyPaul Burton1-1/+1
Commit fbde2d7d8290 ("MIPS: Add generic SMP IPI support") introduced code which calls irq_find_matching_host with a NULL node parameter in order to discover IPI IRQ domains which are not associated with the DT root node's interrupt parent. This suggests that implementations of IPI IRQ domains should effectively ignore the node parameter if it is NULL and search purely based upon the bus token. Commit 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") did not do this when implementing the GIC IPI IRQ domain, and on MIPS Boston boards this leads to no IPI domain being discovered and a NULL pointer dereference when attempting to send an IPI: CPU 0 Unable to handle kernel paging request at virtual address 0000000000000040, epc == ffffffff8016e70c, ra == ffffffff8010ff5c Oops[#1]: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.7.0-rc6-00223-gad0d1b6 #945 task: a8000000ff066fc0 ti: a8000000ff068000 task.ti: a8000000ff068000 $ 0 : 0000000000000000 0000000000000001 ffffffff80730000 0000000000000003 $ 4 : 0000000000000000 ffffffff8057e5b0 a800000001e3ee00 0000000000000000 $ 8 : 0000000000000000 0000000000000023 0000000000000001 0000000000000001 $12 : 0000000000000000 ffffffff803323d0 0000000000000000 0000000000000000 $16 : 0000000000000000 0000000000000000 0000000000000001 ffffffff801108fc $20 : 0000000000000000 ffffffff8057e5b0 0000000000000001 0000000000000000 $24 : 0000000000000000 ffffffff8012de28 $28 : a8000000ff068000 a8000000ff06fbc0 0000000000000000 ffffffff8010ff5c Hi : ffffffff8014c174 Lo : a800000001e1e140 epc : ffffffff8016e70c __ipi_send_mask+0x24/0x11c ra : ffffffff8010ff5c mips_smp_send_ipi_mask+0x68/0x178 Status: 140084e2 KX SX UX KERNEL EXL Cause : 00800008 (ExcCode 02) BadVA : 0000000000000040 PrId : 0001a920 (MIPS I6400) Process swapper/0 (pid: 1, threadinfo=a8000000ff068000, task=a8000000ff066fc0, tls=0000000000000000) Stack : 0000000000000000 0000000000000000 0000000000000001 ffffffff801108fc 0000000000000000 ffffffff8057e5b0 0000000000000001 ffffffff8010ff5c 0000000000000001 0000000000000020 0000000000000000 0000000000000000 0000000000000000 ffffffff801108fc 0000000000000000 0000000000000001 0000000000000001 0000000000000000 0000000000000000 ffffffff801865e8 a8000000ff0c7500 a8000000ff06fc90 0000000000000001 0000000000000002 ffffffff801108fc ffffffff801868b8 0000000000000000 ffffffff801108fc 0000000000000000 0000000000000003 ffffffff8068c700 0000000000000001 ffffffff80730000 0000000000000001 a8000000ff00a290 ffffffff80110c50 0000000000000003 a800000001e48308 0000000000000003 0000000000000008 ... Call Trace: [<ffffffff8016e70c>] __ipi_send_mask+0x24/0x11c [<ffffffff8010ff5c>] mips_smp_send_ipi_mask+0x68/0x178 [<ffffffff801865e8>] generic_exec_single+0x150/0x170 [<ffffffff801868b8>] smp_call_function_single+0x108/0x160 [<ffffffff80110c50>] cps_boot_secondary+0x328/0x394 [<ffffffff80110534>] __cpu_up+0x38/0x90 [<ffffffff8012de4c>] bringup_cpu+0x24/0xac [<ffffffff8012df40>] cpuhp_up_callbacks+0x58/0xdc [<ffffffff8012e648>] cpu_up+0x118/0x18c [<ffffffff806dc158>] smp_init+0xbc/0xe8 [<ffffffff806d4c18>] kernel_init_freeable+0xa0/0x228 [<ffffffff8056c908>] kernel_init+0x10/0xf0 [<ffffffff80105098>] ret_from_kernel_thread+0x14/0x1c Fix this by allowing the GIC IPI IRQ domain to match purely based upon the bus token if the node provided is NULL. Fixes: 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") Signed-off-by: Paul Burton <[email protected]> Cc: [email protected] Cc: Jason Cooper <[email protected]> Cc: Qais Yousef <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>
2016-07-05irqchip/mips-gic: Map to VPs using HW VPNumPaul Burton1-1/+1
When mapping an interrupt to a VP(E) we must use the identifier for the VP that the hardware expects, and this does not always match up with the Linux CPU number. Commit d46812bb0bef ("irqchip: mips-gic: Use HW IDs for VPE_OTHER_ADDR") corrected this for the cases that existed at the time it was written, but commit 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") added another case before the former patch was merged. This leads to incorrectly using Linux CPU numbers when mapping interrupts to VPs, which breaks on certain systems such as those with multi-core I6400 CPUs. Fix by adding the appropriate call to mips_cm_vp_id() to retrieve the expected VP identifier. Fixes: d46812bb0bef ("irqchip: mips-gic: Use HW IDs for VPE_OTHER_ADDR") Fixes: 2af70a962070 ("irqchip/mips-gic: Add a IPI hierarchy domain") Signed-off-by: Paul Burton <[email protected]> Cc: [email protected] Cc: Jason Cooper <[email protected]> Cc: Qais Yousef <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Thomas Gleixner <[email protected]>
2016-07-05ALSA: hda/realtek: Add Lenovo L460 to docking unit fixupTorsten Hilbrich1-0/+1
This solves the issue that a headphone is not working on the docking unit. Signed-off-by: Torsten Hilbrich <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2016-07-05gpu: drm: sun4i_drv: add missing of_node_put after calling of_parse_phandlePeter Chen1-0/+1
of_node_put needs to be called when the device node which is got from of_parse_phandle has finished using. Cc: Maxime Ripard <[email protected]> Cc: Chen-Yu Tsai <[email protected]> Signed-off-by: Peter Chen <[email protected]> Signed-off-by: Maxime Ripard <[email protected]>
2016-07-04qeth: delete napi struct when removing a qeth deviceUrsula Braun2-0/+2
A qeth_card contains a napi_struct linked to the net_device during device probing. This struct must be deleted when removing the qeth device, otherwise Panic on oops can occur when qeth devices are repeatedly removed and added. Fixes: a1c3ed4c9ca ("qeth: NAPI support for l2 and l3 discipline") Cc: [email protected] # v2.6.37+ Signed-off-by: Ursula Braun <[email protected]> Tested-by: Alexander Klein <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-07-04Revert "fsl/fman: fix error handling"David S. Miller1-1/+1
This reverts commit a788a4a040e003574b8ad17115706ab1601ec572. This patch is wrong, the type returned doesn't fit what the error pointer macros expect. Signed-off-by: David S. Miller <[email protected]>
2016-07-04fsl/fman: fix error handlingChristophe Jaillet1-1/+1
This is likely that checking 'fman->fifo_offset' instead of 'fman->cam_offset' is expected here. Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-07-04cdc_ncm: workaround for EM7455 "silent" data interfaceBjørn Mork1-0/+7
Several Lenovo users have reported problems with their Sierra Wireless EM7455 modem. The driver has loaded successfully and the MBIM management channel has appeared to work, including establishing a connection to the mobile network. But no frames have been received over the data interface. The problem affects all EM7455 and MC7455, and is assumed to affect other modems based on the same Qualcomm chipset and baseband firmware. Testing narrowed the problem down to what seems to be a firmware timing bug during initialization. Adding a short sleep while probing is sufficient to make the problem disappear. Experiments have shown that 1-2 ms is too little to have any effect, while 10-20 ms is enough to reliably succeed. Reported-by: Stefan Armbruster <[email protected]> Reported-by: Ralph Plawetzki <[email protected]> Reported-by: Andreas Fett <[email protected]> Reported-by: Rasmus Lerdorf <[email protected]> Reported-by: Samo Ratnik <[email protected]> Reported-and-tested-by: Aleksander Morgado <[email protected]> Signed-off-by: Bjørn Mork <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-07-04RDS: fix rds_tcp_init() error pathVegard Nossum1-2/+3
If register_pernet_subsys() fails, we shouldn't try to call unregister_pernet_subsys(). Fixes: 467fa15356 ("RDS-TCP: Support multiple RDS-TCP listen endpoints, one per netns.") Cc: [email protected] Cc: Sowmini Varadhan <[email protected]> Cc: David S. Miller <[email protected]> Signed-off-by: Vegard Nossum <[email protected]> Acked-by: Sowmini Varadhan <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-07-04geneve: fix max_mtu settingHaishuang Yan1-2/+7
For ipv6+udp+geneve encapsulation data, the max_mtu should subtract sizeof(ipv6hdr), instead of sizeof(iphdr). Signed-off-by: Haishuang Yan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-07-04Revert "gpiolib: Split GPIO flags parsing and GPIO configuration"Johan Hovold2-40/+20
This reverts commit 923b93e451db876d1479d3e4458fce14fec31d1c. Make sure consumers do not overwrite gpio flags for pins that have already been claimed. While adding support for gpio drivers to refuse a request using unsupported flags, the order of when the requested flag was checked and the new flags were applied was reversed to that consumers could overwrite flags for already requested gpios. This not only affects device-tree setups where two drivers could request the same gpio using conflicting configurations, but also allowed user space to clear gpio flags for already claimed pins simply by attempting to export them through the sysfs interface. By for example clearing the FLAG_ACTIVE_LOW flag this way, user space could effectively change the polarity of a signal. Reverting this change obviously prevents gpio drivers from doing sanity checks on the flags in their request callbacks. Fortunately only one recently added driver (gpio-tps65218 in v4.6) appears to do this, and a follow up patch could restore this functionality through a different interface. Cc: stable <[email protected]> # 4.4 Signed-off-by: Johan Hovold <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2016-07-04gpio: sch: Fix Oops on module load on Asus Eee PC 1201Colin Pitrat1-11/+10
This fixes the issue descirbe in bug 117531 (https://bugzilla.kernel.org/show_bug.cgi?id=117531). It's a regression introduced in linux 4.5 that causes a Oops at load of gpio_sch and prevents powering off the computer. The issue is that sch_gpio_reg_set is called in sch_gpio_probe before gpio_chip data is initialized with the pointer to the sch_gpio struct. As sch_gpio_reg_set calls gpiochip_get_data, it returns NULL which causes the Oops. The patch follows Mika's advice (https://lkml.org/lkml/2016/5/9/61) and consists in modifying sch_gpio_reg_get and sch_gpio_reg_set to take a sch_gpio struct directly instead of a gpio_chip, which avoids the call to gpiochip_get_data. Thanks Mika for your patience with me :-) Cc: [email protected] Signed-off-by: Colin Pitrat <[email protected]> Acked-by: Alexandre Courbot <[email protected]> Acked-by: Mika Westerberg <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2016-07-04cpuidle: Fix last_residency divisionShreyas B. Prabhu1-8/+4
Snooze is a poll idle state in powernv and pseries platforms. Snooze has a timeout so that if a CPU stays in snooze for more than target residency of the next available idle state, then it would exit thereby giving chance to the cpuidle governor to re-evaluate and promote the CPU to a deeper idle state. Therefore whenever snooze exits due to this timeout, its last_residency will be target_residency of the next deeper state. Commit e93e59ce5b85 "cpuidle: Replace ktime_get() with local_clock()" changed the math around last_residency calculation. Specifically, while converting last_residency value from nano- to microseconds, it carries out right shift by 10. Because of that, in snooze timeout exit scenarios last_residency calculated is roughly 2.3% less than target_residency of the next available state. This pattern is picked up by get_typical_interval() in the menu governor and therefore expected_interval in menu_select() is frequently less than the target_residency of any state other than snooze. Due to this we are entering snooze at a higher rate, thereby affecting the single thread performance. Fix this by using more precise division via ktime_us_delta(). Fixes: e93e59ce5b85 "cpuidle: Replace ktime_get() with local_clock()" Reported-by: Anton Blanchard <[email protected]> Bisected-by: Shilpasri G Bhat <[email protected]> Signed-off-by: Shreyas B. Prabhu <[email protected]> Acked-by: Daniel Lezcano <[email protected]> Acked-by: Balbir Singh <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2016-07-04ALSA: timer: Fix negative queue usage by racy accessesTakashi Iwai1-1/+1
The user timer tu->qused counter may go to a negative value when multiple concurrent reads are performed since both the check and the decrement of tu->qused are done in two individual locked contexts. This results in bogus read outs, and the endless loop in the user-space side. The fix is to move the decrement of the tu->qused counter into the same spinlock context as the zero-check of the counter. Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2016-07-04iommu/vt-d: Fix infinite loop in free_all_cpu_cached_iovasAaron Campbell1-2/+2
Per VT-d spec Section 10.4.2 ("Capability Register"), the maximum number of possible domains is 64K; indeed this is the maximum value that the cap_ndoms() macro will expand to. Since the value 65536 will not fix in a u16, the 'did' variable must be promoted to an int, otherwise the test for < 65536 will always be true and the loop will never end. The symptom, in my case, was a hung machine during suspend. Fixes: 3bd4f9112f87 ("iommu/vt-d: Fix overflow of iommu->domains array") Signed-off-by: Aaron Campbell <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
2016-07-03Linux 4.7-rc6Linus Torvalds1-1/+1
2016-07-03Merge branch 'for-linus' of ↵Linus Torvalds4-2/+37
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse Pull fuse fix from Miklos Szeredi: "This makes sure userspace filesystems are not broken by the parallel lookups and readdir feature" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/fuse: fuse: serialize dirops by default
2016-07-03Merge branch 'overlayfs-linus' of ↵Linus Torvalds2-8/+33
git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs Pull overlayfs fixes from Miklos Szeredi: "This contains fixes for a dentry leak, a regression in 4.6 noticed by Docker users and missing write access checking in truncate" * 'overlayfs-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mszeredi/vfs: ovl: warn instead of error if d_type is not supported ovl: get_write_access() in truncate ovl: fix dentry leak for default_permissions
2016-07-03perf/x86: Fix 32-bit perf user callgraph collectionJosh Poimboeuf1-5/+6
A basic perf callgraph record operation causes an immediate panic on a 32-bit kernel compiled with CONFIG_CC_STACKPROTECTOR=y: $ perf record -g ls Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c0404fbd CPU: 0 PID: 998 Comm: ls Not tainted 4.7.0-rc5+ #1 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.1-1.fc24 04/01/2014 c0dd5967 ff7afe1c 00000086 f41dbc2c c07445a0 464c457f f41dbca8 f41dbc44 c05646f4 f41dbca8 464c457f f41dbca8 464c457f f41dbc54 c04625be c0ce56fc c0404fbd f41dbc88 c0404fbd b74668f0 f41dc000 00000000 c0000000 00000000 Call Trace: [<c07445a0>] dump_stack+0x58/0x78 [<c05646f4>] panic+0x8e/0x1c6 [<c04625be>] __stack_chk_fail+0x1e/0x30 [<c0404fbd>] ? perf_callchain_user+0x22d/0x230 [<c0404fbd>] perf_callchain_user+0x22d/0x230 [<c055f89f>] get_perf_callchain+0x1ff/0x270 [<c055f988>] perf_callchain+0x78/0x90 [<c055c7eb>] perf_prepare_sample+0x24b/0x370 [<c055c934>] perf_event_output_forward+0x24/0x70 [<c05531c0>] __perf_event_overflow+0xa0/0x210 [<c0550a93>] ? cpu_clock_event_read+0x43/0x50 [<c0553431>] perf_swevent_hrtimer+0x101/0x180 [<c0456235>] ? kmap_atomic_prot+0x35/0x140 [<c056dc69>] ? get_page_from_freelist+0x279/0x950 [<c058fdd8>] ? vma_interval_tree_remove+0x158/0x230 [<c05939f4>] ? wp_page_copy.isra.82+0x2f4/0x630 [<c05a050d>] ? page_add_file_rmap+0x1d/0x50 [<c0565611>] ? unlock_page+0x61/0x80 [<c0566755>] ? filemap_map_pages+0x305/0x320 [<c059769f>] ? handle_mm_fault+0xb7f/0x1560 [<c074cbeb>] ? timerqueue_del+0x1b/0x70 [<c04cfefe>] ? __remove_hrtimer+0x2e/0x60 [<c04d017b>] __hrtimer_run_queues+0xcb/0x2a0 [<c0553330>] ? __perf_event_overflow+0x210/0x210 [<c04d0a2a>] hrtimer_interrupt+0x8a/0x180 [<c043ecc2>] local_apic_timer_interrupt+0x32/0x60 [<c043f643>] smp_apic_timer_interrupt+0x33/0x50 [<c0b0cd38>] apic_timer_interrupt+0x34/0x3c Kernel Offset: disabled ---[ end Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: c0404fbd The panic is caused by the fact that perf_callchain_user() mistakenly assumes it's 64-bit only and ends up corrupting the stack. Signed-off-by: Josh Poimboeuf <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Cc: [email protected] # v4.5+ Fixes: 75925e1ad7f5 ("perf/x86: Optimize stack walk user accesses") Link: http://lkml.kernel.org/r/1a547f5077ec30f75f9b57074837c3c80df86e5e.1467432113.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <[email protected]>
2016-07-03perf/x86/intel: Update event constraints when HT is offStephane Eranian1-0/+29
This patch updates the event constraints for non-PEBS mode for Intel Broadwell and Skylake processors. When HT is off, each CPU gets 8 generic counters. However, not all events can be programmed on any of the 8 counters. This patch adds the constraints for the MEM_* events which can only be measured on the bottom 4 counters. The constraints are also valid when HT is off because, then, there are only 4 generic counters and they are the bottom counters. Signed-off-by: Stephane Eranian <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2016-07-03ovl: warn instead of error if d_type is not supportedVivek Goyal1-5/+7
overlay needs underlying fs to support d_type. Recently I put in a patch in to detect this condition and started failing mount if underlying fs did not support d_type. But this breaks existing configurations over kernel upgrade. Those who are running docker (partially broken configuration) with xfs not supporting d_type, are surprised that after kernel upgrade docker does not run anymore. https://github.com/docker/docker/issues/22937#issuecomment-229881315 So instead of erroring out, detect broken configuration and warn about it. This should allow existing docker setups to continue working after kernel upgrade. Signed-off-by: Vivek Goyal <[email protected]> Signed-off-by: Miklos Szeredi <[email protected]> Fixes: 45aebeaf4f67 ("ovl: Ensure upper filesystem supports d_type") Cc: <[email protected]> 4.6
2016-07-02Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-4/+6
Pull MIPS fix from Ralf Baechle: "Only a single fix for 4.7 pending at this point. It fixes an issue that may lead to corruption of the cache mode bits in the page table" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: MIPS: Fix possible corruption of cache mode by mprotect.
2016-07-02Merge tag 'powerpc-4.7-5' of ↵Linus Torvalds7-19/+65
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - tm: Always reclaim in start_thread() for exec() class syscalls from Cyril Bur - tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0 from Michael Neuling - eeh: Fix wrong argument passed to eeh_rmv_device() from Gavin Shan - Initialise pci_io_base as early as possible from Darren Stevens * tag 'powerpc-4.7-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc: Initialise pci_io_base as early as possible powerpc/tm: Avoid SLB faults in treclaim/trecheckpoint when RI=0 powerpc/eeh: Fix wrong argument passed to eeh_rmv_device() powerpc/tm: Always reclaim in start_thread() for exec() class syscalls
2016-07-02net: phy: dp83867: Fix initialization of PHYCR registerStefan Hauser1-4/+9
When initializing the PHY control register, the FIFO depth bits are written without reading the previous register value, i.e. all other bits are overwritten with zero. This disables automatic MDI-X configuration, which is enabled by default. Fix initialization by doing a read/modify/write operation. Signed-off-by: Stefan Hauser <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-07-02enc28j60: Fix race condition in enc28j60 driverSergio Valverde1-2/+5
The interrupt worker code for the enc28j60 relies only on the TXIF flag to determinate if the packet transmission was completed. However the datasheet specifies in section 12.1.3 that TXERIF will clear the TXRTS after a transmit abort. Also in section 12.1.4 that TXIF will be set when TXRTS transitions from '1' to '0'. Therefore the TXIF flag is enabled during transmission errors. This causes a race condition, since the worker code will invoke enc28j60_tx_clear() -> netif_wake_queue(), potentially invoking the ndo_start_xmit function to send a new packet. The enc28j60_send_packet function uses a workqueue that invokes enc28j60_hw_tx(). In between this function is called, the worker from the interrupt handler will enter the path for error handler because of the TXERIF flag, causing to invoke enc28j60_tx_clear() again and releasing the packet scheduled for transmission, causing a kernel crash with due a NULL pointer. These crashes due a NULL pointer were observed under stress conditions of the device. A BUG_ON() sequence was used to validate the issue was fixed, and has been running without problems for 2 years now. Signed-off-by: Diego Dompe <[email protected]> Acked-by: Sergio Valverde <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-07-02net: stmmac: Fix null-function call in ISR on stmmac1000Matt Corallo1-1/+1
(resent due to overhelpful mail client corrupting patch) At least on Meson GXBB, the CORE_IRQ_MTL_RX_OVERFLOW interrupt is thrown with the stmmac1000 driver, which does not support set_rx_tail_ptr. With this patch and the clock fixes, 1G ethernet works on ODROID-C2. Signed-off-by: Matt Corallo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2016-07-02Merge tag 'drm-fixes-for-v4.7-rc6' of ↵Linus Torvalds12-78/+160
git://people.freedesktop.org/~airlied/linux Pull drm fixes frlm Dave Airlie: "Just some AMD and Intel fixes, the AMD ones are further production Polaris fixes, and the Intel ones fix some early timeouts, some PCI ID changes and a couple of other fixes. Still a bit Internet challenged here, hopefully end of next week will solve it" * tag 'drm-fixes-for-v4.7-rc6' of git://people.freedesktop.org/~airlied/linux: drm/i915: Fix missing unlock on error in i915_ppgtt_info() drm/amd/powerplay: workaround for UVD clock issue drm/amdgpu: add ACLK_CNTL setting for polaris10 drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11. drm/amd/powerplay: Workaround for Memory EDC Error on Polaris10. drm/i915: Removing PCI IDs that are no longer listed as Kabylake. drm/i915: Add more Kabylake PCI IDs. drm/i915: Avoid early timeout during AUX transfers drm/i915/hsw: Avoid early timeout during LCPLL disable/restore drm/i915/lpt: Avoid early timeout during FDI PHY reset drm/i915/bxt: Avoid early timeout during PLL enable drm/i915: Refresh cached DP port register value on resume drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation drm/amd/powerplay: disable FFC. drm/amd/powerplay: add some definition for FFC feature on polaris.
2016-07-02Merge tag 'spi-fix-v4.7-rc5' of ↵Linus Torvalds4-6/+38
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A few small driver-specific fixes for SPI, all in the normal important if you hit them category especially the rockchip driver fix which addresses a race which has been exposed more frequently with some recent performance improvements" * tag 'spi-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: sunxi: fix transfer timeout spi: sun4i: fix FIFO limit spi: rockchip: Signal unfinished DMA transfers spi: spi-ti-qspi: Suspend the queue before removing the device
2016-07-02Merge tag 'regulator-fix-v4.7-rc5' of ↵Linus Torvalds2-2/+7
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator Pull regulator fixes from Mark Brown: "Two small fixes for the regulator subsystem - one fixing a crash with one of the devices supported by the max77620 driver, another fixing startup for the anatop regulator when it starts up with the regulator in bypass mode" * tag 'regulator-fix-v4.7-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: regulator: max77620: check for valid regulator info regulator: anatop: allow regulator to be in bypass mode
2016-07-02Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds4-17/+11
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A small fix for the newly added oxnas clk driver and a handful of rockchip clk driver fixes for newly added rk3399 support" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: Fix return value check in oxnas_stdclk_probe() clk: rockchip: release io resource when failing to init clk on rk3399 clk: rockchip: fix cpuclk registration error handling clk: rockchip: Revert "clk: rockchip: reset init state before mmc card initialization" clk: rockchip: fix incorrect parent for rk3399's {c,g}pll_aclk_perihp_src clk: rockchip: mark rk3399 GIC clocks as critical clk: rockchip: initialize flags of clk_init_data in mmc-phase clock
2016-07-02Merge tag 'asoc-fix-v4.7-rc5' of ↵Takashi Iwai992-5881/+9521
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v4.7 A small clutch of hardware specific fixes for various ASoC devices, all small individually and important if you have that device but not otherwise.
2016-07-02Merge tag 'drm-intel-fixes-2016-06-30' of ↵Dave Airlie5-22/+22
git://anongit.freedesktop.org/drm-intel into drm-fixes here's a batch of i915 fixes for 4.7. * tag 'drm-intel-fixes-2016-06-30' of git://anongit.freedesktop.org/drm-intel: drm/i915: Fix missing unlock on error in i915_ppgtt_info() drm/i915: Removing PCI IDs that are no longer listed as Kabylake. drm/i915: Add more Kabylake PCI IDs. drm/i915: Avoid early timeout during AUX transfers drm/i915/hsw: Avoid early timeout during LCPLL disable/restore drm/i915/lpt: Avoid early timeout during FDI PHY reset drm/i915/bxt: Avoid early timeout during PLL enable drm/i915: Refresh cached DP port register value on resume
2016-07-02Merge branch 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie7-56/+138
into drm-fixes Just a few more late fixes for Polaris cards. * 'drm-fixes-4.7' of git://people.freedesktop.org/~agd5f/linux: drm/amd/powerplay: workaround for UVD clock issue drm/amdgpu: add ACLK_CNTL setting for polaris10 drm/amd/powerplay: fix issue uvd dpm can't enabled on Polaris11. drm/amd/powerplay: Workaround for Memory EDC Error on Polaris10. drm/amd/powerplay: Update CKS on/ CKS off voltage offset calculation drm/amd/powerplay: disable FFC. drm/amd/powerplay: add some definition for FFC feature on polaris.
2016-07-02MIPS: Fix possible corruption of cache mode by mprotect.Ralf Baechle1-4/+6
The following testcase may result in a page table entries with a invalid CCA field being generated: static void *bindstack; static int sysrqfd; static void protect_low(int protect) { mprotect(bindstack, BINDSTACK_SIZE, protect); } static void sigbus_handler(int signal, siginfo_t * info, void *context) { void *addr = info->si_addr; write(sysrqfd, "x", 1); printf("sigbus, fault address %p (should not happen, but might)\n", addr); abort(); } static void run_bind_test(void) { unsigned int *p = bindstack; p[0] = 0xf001f001; write(sysrqfd, "x", 1); /* Set trap on access to p[0] */ protect_low(PROT_NONE); write(sysrqfd, "x", 1); /* Clear trap on access to p[0] */ protect_low(PROT_READ | PROT_WRITE | PROT_EXEC); write(sysrqfd, "x", 1); /* Check the contents of p[0] */ if (p[0] != 0xf001f001) { write(sysrqfd, "x", 1); /* Reached, but shouldn't be */ printf("badness, shouldn't happen but does\n"); abort(); } } int main(void) { struct sigaction sa; sysrqfd = open("/proc/sysrq-trigger", O_WRONLY); if (sigprocmask(SIG_BLOCK, NULL, &sa.sa_mask)) { perror("sigprocmask"); return 0; } sa.sa_sigaction = sigbus_handler; sa.sa_flags = SA_SIGINFO | SA_NODEFER | SA_RESTART; if (sigaction(SIGBUS, &sa, NULL)) { perror("sigaction"); return 0; } bindstack = mmap(NULL, BINDSTACK_SIZE, PROT_READ | PROT_WRITE | PROT_EXEC, MAP_PRIVATE | MAP_ANONYMOUS, -1, 0); if (bindstack == MAP_FAILED) { perror("mmap bindstack"); return 0; } printf("bindstack: %p\n", bindstack); run_bind_test(); printf("done\n"); return 0; } There are multiple ingredients for this: 1) PAGE_NONE is defined to _CACHE_CACHABLE_NONCOHERENT, which is CCA 3 on all platforms except SB1 where it's CCA 5. 2) _page_cachable_default must have bits set which are not set _CACHE_CACHABLE_NONCOHERENT. 3) Either the defective version of pte_modify for XPA or the standard version must be in used. However pte_modify for the 36 bit address space support is no affected. In that case additional bits in the final CCA mode may generate an invalid value for the CCA field. On the R10000 system where this was tracked down for example a CCA 7 has been observed, which is Uncached Accelerated. Fixed by: 1) Using the proper CCA mode for PAGE_NONE just like for all the other PAGE_* pte/pmd bits. 2) Fix the two affected variants of pte_modify. Further code inspection also shows the same issue to exist in pmd_modify which would affect huge page systems. Issue in pte_modify tracked down by Alastair Bridgewater, PAGE_NONE and pmd_modify issue found by me. The history of this goes back beyond Linus' git history. Chris Dearman's commit 351336929ccf222ae38ff0cb7a8dd5fd5c6236a0 ("[MIPS] Allow setting of the cache attribute at run time.") missed the opportunity to fix this but it was originally introduced in lmo commit d523832cf12007b3242e50bb77d0c9e63e0b6518 ("Missing from last commit.") and 32cc38229ac7538f2346918a09e75413e8861f87 ("New configuration option CONFIG_MIPS_UNCACHED.") Signed-off-by: Ralf Baechle <[email protected]> Reported-by: Alastair Bridgewater <[email protected]>
2016-07-02ACPI,PCI,IRQ: separate ISA penalty calculationSinan Kaya1-3/+3
Since commit 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements) the penalty values are calculated on the fly rather than at boot time. This works fine for PCI interrupts but not so well for ISA interrupts. The information on whether or not an ISA interrupt is in use is not available to the pci_link.c code directly. That information is obtained from the outside via acpi_penalize_isa_irq(). [If its "active" argument is true, then the IRQ is in use by ISA.] Since the current code relies on PCI Link objects for determination of penalties, we are factoring in the PCI penalty twice after acpi_penalize_isa_irq() function is called. To avoid that, limit the newly added functionality to just PCI interrupts so that old behavior is still maintained. Fixes: 103544d86976 (ACPI,PCI,IRQ: reduce resource requirements) Signed-off-by: Sinan Kaya <[email protected]> Tested-by: Wim Osterholt <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2016-07-02Revert "ACPI, PCI, IRQ: remove redundant code in acpi_irq_penalty_init()"Sinan Kaya3-0/+38
Trying to make the ISA and PCI init functionality common turned out to be a bad idea, because the ISA path depends on external functionality. Restore the previous behavior and limit the refactoring to PCI interrupts only. Fixes: 1fcb6a813c4f "ACPI,PCI,IRQ: remove redundant code in acpi_irq_penalty_init()" Signed-off-by: Sinan Kaya <[email protected]> Tested-by: Wim Osterholt <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.