aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-11-28ASoC: dt-bindings: Rework Qualcomm APR/GPR Sound nodes for SM8450Mark Brown15-272/+515
Merge series from Krzysztof Kozlowski <[email protected]>: Adding sound support for Qualcomm SM8450 SoC (and later for SC8280XP) brought some changes to APR/GPR services bindings. These bindings are part of qcom,apr.yaml: apr-or-gpr-device-node <- qcom,apr.yaml apr-gpr-service@[0-9] <- qcom,apr.yaml service-specific-components <- /schemas/sound/qcom,q6*.yaml The schema for services (apr-gpr-service@[0-9]) was not complete and is still quite not specific. It allows several incorrect combinations, like adding a clock-controller to a APM device. Restricting it would complicate the schema even more. Bringing new support for sound on Qualcomm SM8450 and SC8280XP SoC would grow it as well. Refactor the bindings before extending them for Qualcomm SM8450 SoC.
2022-11-28ASoC: qcom: lpass-sc7180: Add system suspend/resume PM opsSrinivasa Rao Mandadapu1-0/+26
Update lpass sc7180 platform driver with PM ops, such as system supend and resume callbacks. This update is required to disable clocks during supend and avoid XO shutdown issue. Signed-off-by: Srinivasa Rao Mandadapu <[email protected]> Tested-by: Rahul Ajmeriya <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: rt5640: Fix Jack work after system suspendOder Chiou1-0/+8
We found an corner case in RT5640 codec driver which schedules jack work after system suspend as IRQ was enabled. Due to this, hitting the error as register access happening after suspend as jack worker thread getting scheduled in irq handler. The patch disables the irq during the suspend to prevent the corner case happening. Signed-off-by: Oder Chiou <[email protected]> Reported-by: Mohan Kumar D <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: SOF: Drop obsolete dependency on COMPILE_TESTJean Delvare1-1/+1
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. Signed-off-by: Jean Delvare <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: max9867: Implement exact integer modePavel Dobias1-3/+30
For 8kHz and 16kHz sample rates and certain PCLK values the codec can be programmed to operate in exact integer mode. If available, use it to achieve the exact sample rate. Signed-off-by: Pavel Dobias <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: rsnd: adg: use __clk_get_name() instead of local clk_name[]Kuninori Morimoto1-2/+2
Current rsnd_adg_clk_dbg_info() is using locak clk_name[] to ndicating clk name, but we don't want to use local clk_name[] everywhere when we support R-Car Gen4 sound to handling non compatible clk naming. This patch uses __clk_get_name() instead of local clk_name[] for it. Signed-off-by: Kuninori Morimoto <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: sdw-mockup: Switch to new snd_sdw_params_to_config helperCharles Keepax1-20/+8
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by: Charles Keepax <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: rt715: Switch to new snd_sdw_params_to_config helperCharles Keepax2-34/+16
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by: Charles Keepax <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: rt711: Switch to new snd_sdw_params_to_config helperCharles Keepax2-36/+18
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by: Charles Keepax <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: rt700: Switch to new snd_sdw_params_to_config helperCharles Keepax1-21/+11
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by: Charles Keepax <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: rt5682-sdw: Switch to new snd_sdw_params_to_config helperCharles Keepax1-19/+9
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by: Charles Keepax <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: rt1316-sdw: Switch to new snd_sdw_params_to_config helperCharles Keepax1-22/+10
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by: Charles Keepax <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: rt1308-sdw: Switch to new snd_sdw_params_to_config helperCharles Keepax1-22/+11
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by: Charles Keepax <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: max98373-sdw: Switch to new snd_sdw_params_to_config helperCharles Keepax1-20/+11
The conversion from hw_params to SoundWire config is pretty standard as such most of the conversion can be handled by the new snd_sdw_params_to_config helper function. Signed-off-by: Charles Keepax <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28sound: sdw: Add hw_params to SoundWire config helper functionCharles Keepax1-0/+49
The vast majority of the current users of the SoundWire framework have almost identical code for converting from hw_params to SoundWire configuration. Whilst complex devices might require more, it is very likely that most new devices will follow the same pattern. Save a little code by factoring this out into a helper function. Signed-off-by: Charles Keepax <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: rsnd: Drop obsolete dependency on COMPILE_TESTJean Delvare1-1/+1
Since commit 0166dc11be91 ("of: make CONFIG_OF user selectable"), it is possible to test-build any driver which depends on OF on any architecture by explicitly selecting OF. Therefore depending on COMPILE_TEST as an alternative is no longer needed. Signed-off-by: Jean Delvare <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: SOF: amd: ADD HS and SP virtual DAI.V sujith kumar Reddy2-0/+32
ADD HS and SP virtual DAI driver to support AMD platforms. Signed-off-by: V sujith kumar Reddy <[email protected]> Link: https://lore.kernel.org/r/20221123121911.3446224-4-vsujithkumar.reddy@amd.corp-partner.google.com Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: SOF: amd: Fix for selecting clock source as external clock.V sujith kumar Reddy2-1/+11
By default clock source is selected as internal clock of 96Mhz which is not configurable. Now we select the clock source to external clock (ACLK) which can be configurable to different clock ranges depending on usecase. Signed-off-by: V sujith kumar Reddy <[email protected]> Link: https://lore.kernel.org/r/20221123121911.3446224-3-vsujithkumar.reddy@amd.corp-partner.google.com Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: SOF: amd: Fix for reading position updates from stream box.V sujith kumar Reddy3-1/+34
By default the position updates are read from dsp box when streambox size is not defined.if the streambox size is defined to some value then position updates can be read from the streambox. Signed-off-by: V sujith kumar Reddy <[email protected]> Link: https://lore.kernel.org/r/20221123121911.3446224-2-vsujithkumar.reddy@amd.corp-partner.google.com Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: dt-bindings: qcom,q6apm: Add SM8450 bedais nodeKrzysztof Kozlowski1-0/+16
On SM8450 and SC8280XP, the Q6APM is a bit different: 1. It is used as a platform DAI link, so it needs #sound-dai-cells. 2. It has two DAI children, so add new "bedais" node. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: dt-bindings: qcom,q6apm-lpass-dais: Split to separate schemaKrzysztof Kozlowski2-1/+32
The Qualcomm DSP LPASS Audio DAIs are a bit different than Qualcomm DSP Audio FrontEnd (Q6AFE) DAIs - they do not use children nodes for each DAI. None of other properties from qcom,q6dsp-lpass-ports.yaml apply here as well, so move the qcom,q6apm-lpass-dais compatible to its own binding. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: dt-bindings: qcom,q6core: Split to separate schemaKrzysztof Kozlowski1-0/+39
The APR/GPR bindings with services got complicated so move out the Q6Core service to its own binding. Previously the compatible was documented in qcom,apr.yaml. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: dt-bindings: qcom,q6prm: Split to separate schemaKrzysztof Kozlowski1-0/+50
The APR/GPR bindings with services got complicated so move out the Q6PRM service to its own binding. Previously the compatible was documented in qcom,apr.yaml. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: dt-bindings: qcom,q6asm: Split to separate schemaKrzysztof Kozlowski2-32/+84
The APR/GPR bindings with services got complicated so move out the Q6ASM service to its own binding. Previously the compatible was documented in qcom,apr.yaml. Move most of the examples from its children to this new file. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: dt-bindings: qcom,q6adm: Split to separate schemaKrzysztof Kozlowski2-19/+54
The APR/GPR bindings with services got complicated so move out the Q6ADM service to its own binding. Previously the compatible was documented in qcom,apr.yaml. Move most of the examples from its children to this new file. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: dt-bindings: qcom,q6apm: Split to separate schemaKrzysztof Kozlowski2-16/+54
The APR/GPR bindings with services got complicated so move out the Q6APM service to its own binding. Previously the compatible was documented in qcom,apr.yaml. Move most of the examples from its children to this new file. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: dt-bindings: qcom,q6afe: Split to separate schemaKrzysztof Kozlowski3-84/+80
The APR/GPR bindings with services got complicated so move out the Q6AFE service to its own binding. Previously the compatible was documented in qcom,apr.yaml. Move most of the examples from its children to this new file. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: dt-bindings: qcom,apr: Correct and extend exampleKrzysztof Kozlowski1-22/+39
Correct the APR/GPR example: 1. Use consistent 4-space indentation, 2. Add required properties to services nodes, so the binding check passes once schema for these services is improved, 3. Add few other properties as APR/GPR is part of a GLINK edge: qcom,glink-channels and qcom,intents. 4. Drop unnecessary services, to make the example compact. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: dt-bindings: qcom,apr: Split services to shared schemaKrzysztof Kozlowski3-96/+58
The APR/GPR nodes are organized like: apr-or-gpr-device-node <- qcom,apr.yaml apr-gpr-service@[0-9] <- qcom,apr.yaml service-specific-components <- /schemas/sound/qcom,q6*.yaml The schema for services (apr-gpr-service@[0-9]) already grows considerably and is still quite not specific. It allows several incorrect combinations, like adding a clock-controller to a APM device. Restricting it would complicate the schema even more. Bringing new support for sound on Qualcomm SM8450 and SC8280XP SoC would grow it as well. Simplify the qcom,apr.yaml by splitting the services to a shared file which will be: 1. Referenced by qcom,apr.yaml with additionalProperties:true, 2. Referenced by specific bindings for services with additionalProperties:false (not yet in this commit). While moving the code, add also required 'reg' and 'qcom,protection-domain' to further constrain the bindings. Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-28ASoC: dt-bindings: qcom,apr: Add GLINK channel name for SM8450Krzysztof Kozlowski1-2/+9
On SM8450 and SC8280XP with Qualcomm GPR, the GLINK channel name (qcom,glink-channels) for ADSP is "adsp_apps". Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Rob Herring <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-25RK3588 Audio SupportMark Brown2-6/+15
Merge series from Nicolas Frattaroli <[email protected]>: This patchset refactors the Rockchip I2S/TDM driver in order to support the RK3588 SoC, and then adds the necessary compatible string to load the driver for it. Patch 1 rectifies a problem with the bindings where we were too strict about requiring the rockchip,grf property. Most features of this audio device don't need access to the GRF to function. Patch 2 modifies the driver to adjust its behaviour to what the changed bindings now allow, namely using most things without the GRF. Patch 3 and 4 are boring compatible string stuff that enables RK3588 support. No special data is needed to initialise the driver for this instance of the I2S/TDM IP.
2022-11-25ASoC: adau1372: fixes after debugging custom boardMark Brown378-37205/+38942
Merge series from Maarten Zanders <[email protected]>: A collection of fixes and improvements for the adau1372 driver.
2022-11-25ASoC: adau1372: add support for S24_LE modeMaarten Zanders1-1/+5
The ADAU1372 contains 24bit ADCs and DACs. Allow the driver to use its native mode which uses the same settings as the current 32 bit mode. Signed-off-by: Maarten Zanders <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-25ASoC: adau1372: correct PGA enable & mute bitMaarten Zanders1-8/+8
The DAPM control for PGAx uses the PGA mute bit for power management. This bit is active high but is set to non-inverted (ie when powering, it will mute). The ALSA control "PGA x Capture Switch" uses the active high PGA_ENx bit, but is set to inverted. So when enabling this switch, the PGA gets disabled. To correct the behaviour, invert both these bits. Signed-off-by: Maarten Zanders <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-25ASoC: adau1372: fix mclkMaarten Zanders1-5/+4
"mclk" is retrieved from the configuration and assigned to adau1372->clk. However adau1372->mclk (==NULL) is used for clk_prepare_enable() and clk_disable_unprepare() which don't have any effect. Remove .clk from struct adau1372 and use .mclk throughout. This change ensures that the input clock is switched on/off when the bias level is changed. Signed-off-by: Maarten Zanders <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-25ASoC: mediatek: mtk-btcvsd: Add checks for write and read of mtk_btcvsd_sndJiasheng Jiang1-4/+2
As the mtk_btcvsd_snd_write and mtk_btcvsd_snd_read may return error, it should be better to catch the exception. Fixes: 4bd8597dc36c ("ASoC: mediatek: add btcvsd driver") Signed-off-by: Jiasheng Jiang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-25ASoC: dt-bindings: wcd9335: fix reset line polarity in exampleDmitry Torokhov1-1/+1
When resetting the block, the reset line is being driven low and then high, which means that the line in DTS should be annotated as "active low". Fixes: 1877c9fda1b7 ("ASoC: dt-bindings: add dt bindings for wcd9335 audio codec") Signed-off-by: Dmitry Torokhov <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-25ASoC: rockchip: i2s_tdm: Add support for RK3588Nicolas Frattaroli1-1/+2
This adds support for the RK3588 SoC to the I2S/TDM driver. Signed-off-by: Nicolas Frattaroli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-25ASoC: dt-bindings: rockchip: i2s-tdm: Add RK3588 compatibleNicolas Frattaroli1-0/+1
This adds the compatible string for the RK3588 SoC. Signed-off-by: Nicolas Frattaroli <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-25ASoC: rockchip: i2s_tdm: Make the grf property optionalNicolas Frattaroli1-4/+12
Only IO Multiplex and two TRCM modes need access to the GRF, so making it a hard requirement is not a wise idea, as it complicates support for newer SoCs which do not do these things. Signed-off-by: Nicolas Frattaroli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-25ASoC: dt-bindings: rockchip: i2s-tdm: Make grf property optionalNicolas Frattaroli1-1/+0
Turns out most things don't require the GRF, so making the property optional is the obvious move. Signed-off-by: Nicolas Frattaroli <[email protected]> Acked-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-25firmware: cs_dsp: Switch to using namespaced exportsMark Brown8-35/+38
Merge series from Richard Fitzgerald <[email protected]>: Use EXPORT_SYMBOL_NS_GPL() instead of EXPORT_SYMBOL_GPL() and patch the three drivers that use cs_dsp to add the MODULE_IMPORT_NS(). To make the namespace more specific the KConfig symbol for cs_dsp is changed from CS_DSP to FW_CS_DSP.
2022-11-25ASoC/soundwire: revisit interrupt and lcount handlingMark Brown9-121/+138
Merge series from Bard Liao <[email protected]>: The code in drivers/soundwire/intel_init.c is hardware-dependent and the code does not apply to new generations starting with MeteorLake. Refactor and clean-up the code to make this intel_init.c hardware-agnostic and move all hardware-dependencies in the SOF driver using chip descriptors.
2022-11-25ASoC: wm_adsp: Report when a control write changes the valueMark Brown2-14/+30
Merge series from Richard Fitzgerald <[email protected]>: Writing a firmware control should be returning 1 if the control value changed, so these two patches add that. Though this is an ALSA requirement it is also useful for non-ALSA clients of cs_dsp to know if the control value changed, so the main handling is implemented in cs_dsp. TLV controls are specifically an ALSA thing so they are handled specially in wm_adsp. Simon Trimmer (2): firmware: cs_dsp: cs_dsp_coeff_write_ctrl() should report changed ASoC: wm_adsp: Return whether changed when writing controls drivers/firmware/cirrus/cs_dsp.c | 17 ++++++++++++----- sound/soc/codecs/wm_adsp.c | 27 ++++++++++++++++++--------- 2 files changed, 30 insertions(+), 14 deletions(-) -- 2.30.2
2022-11-25firmware: cs_dsp: Make the exports namespacedRichard Fitzgerald4-31/+34
Move all the exports into a namespace. This also adds the MODULE_IMPORT_NS to the 3 drivers that use the exported functions. Signed-off-by: Richard Fitzgerald <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-25firmware: cs_dsp: Rename KConfig symbol CS_DSP -> FW_CS_DSPRichard Fitzgerald4-4/+4
Qualify the KConfig symbol for cs_dsp by adding a FW_ prefix so that it is more explicit what is being referred to. This is preparation for using the symbol to namespace the exports. Signed-off-by: Richard Fitzgerald <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-24ASoC: codecs: src4xxx-i2c: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Matt Flax <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2022-11-24ASoC: max98396: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+3
.probe_new() doesn't get the i2c_device_id * parameter, so determine that explicitly in the probe function. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-24ASoC: codecs: tas2780: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-11-24ASoC: codecs: es8326: Convert to i2c's .probe_new()Uwe Kleine-König1-3/+2
The probe function doesn't make use of the i2c_device_id * parameter so it can be trivially converted. Signed-off-by: Uwe Kleine-König <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.