aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-11-10Merge tag 'nvme-6.1-2022-11-10' of git://git.infradead.org/nvme into block-6.1Jens Axboe3-6/+7
Pull NVMe fixes from Christoph: "nvme fixes for Linux 6.1 - quiet user passthrough command errors (Keith Busch) - fix memory leak in nvmet_subsys_attr_model_store_locked - fix a memory leak in nvmet-auth (Sagi Grimberg)" * tag 'nvme-6.1-2022-11-10' of git://git.infradead.org/nvme: nvmet: fix a memory leak nvmet: fix memory leak in nvmet_subsys_attr_model_store_locked nvme: quiet user passthrough command errors
2022-11-10ALSA: memalloc: Don't fall back for SG-buffer with IOMMUTakashi Iwai1-9/+11
When the non-contiguous page allocation for SG buffer allocation fails, the memalloc helper tries to fall back to the old page allocation methods. This would, however, result in the bogus page addresses when IOMMU is enabled. Usually in such a case, the fallback allocation should fail as well, but occasionally it succeeds and hitting a bad access. The fallback was thought for non-IOMMU case, and as the error from dma_alloc_noncontiguous() with IOMMU essentially implies a fatal memory allocation error, we should return the error straightforwardly without fallback. This avoids the corner case like the above. The patch also renames the local variable "dma_ops" with snd_ prefix for avoiding the name conflict. Fixes: a8d302a0b770 ("ALSA: memalloc: Revive x86-specific WC page allocations again") Reported-by: Kai Vehmanen <[email protected]> Reviewed-by: Kai Vehmanen <[email protected]> Link: https://lore.kernel.org/r/alpine.DEB.2.22.394.2211041541090.3532114@eliteleevi.tm.intel.com Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-11-10net: mv643xx_eth: disable napi when init rxq or txq failed in mv643xx_eth_open()Zhengchao Shao1-0/+1
When failed to init rxq or txq in mv643xx_eth_open() for opening device, napi isn't disabled. When open mv643xx_eth device next time, it will trigger a BUG_ON() in napi_enable(). Compile tested only. Fixes: 2257e05c1705 ("mv643xx_eth: get rid of receive-side locking") Signed-off-by: Zhengchao Shao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-11-10ethernet: s2io: disable napi when start nic failed in s2io_card_up()Zhengchao Shao1-9/+20
When failed to start nic or add interrupt service routine in s2io_card_up() for opening device, napi isn't disabled. When open s2io device next time, it will trigger a BUG_ON()in napi_enable(). Compile tested only. Fixes: 5f490c968056 ("S2io: Fixed synchronization between scheduling of napi with card reset and close") Signed-off-by: Zhengchao Shao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-11-10Merge branch 'macsec-clear-encryption-keys-in-h-w-drivers'Paolo Abeni3-7/+14
Antoine Tenart says: ==================== macsec: clear encryption keys in h/w drivers Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after setting up offload") made sure to clean encryption keys from the stack after setting up offloading but some h/w drivers did a copy of the key which need to be zeroed as well. The MSCC PHY driver can actually be converted not to copy the encryption key at all, but such patch would be quite difficult to backport. I'll send a following up patch doing this in net-next once this series lands. Tested on the MSCC PHY but not on the atlantic NIC. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-11-10net: atlantic: macsec: clear encryption keys from the stackAntoine Tenart2-7/+13
Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after setting up offload") made sure to clean encryption keys from the stack after setting up offloading, but the atlantic driver made a copy and did not clear it. Fix this. [4 Fixes tags below, all part of the same series, no need to split this] Fixes: 9ff40a751a6f ("net: atlantic: MACSec ingress offload implementation") Fixes: b8f8a0b7b5cb ("net: atlantic: MACSec ingress offload HW bindings") Fixes: 27736563ce32 ("net: atlantic: MACSec egress offload implementation") Fixes: 9d106c6dd81b ("net: atlantic: MACSec egress offload HW bindings") Signed-off-by: Antoine Tenart <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-11-10net: phy: mscc: macsec: clear encryption keys when freeing a flowAntoine Tenart1-0/+1
Commit aaab73f8fba4 ("macsec: clear encryption keys from the stack after setting up offload") made sure to clean encryption keys from the stack after setting up offloading, but the MSCC PHY driver made a copy, kept it in the flow data and did not clear it when freeing a flow. Fix this. Fixes: 28c5107aa904 ("net: phy: mscc: macsec support") Signed-off-by: Antoine Tenart <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-11-10Merge branch 'stmmac-dwmac-loongson-fixes-three-leaks'Paolo Abeni1-8/+31
Yang Yingliang says: ==================== stmmac: dwmac-loongson: fixes three leaks patch #2 fixes missing pci_disable_device() in the error path in probe() patch #1 and pach #3 fix missing pci_disable_msi() and of_node_put() in error and remove() path. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-11-10stmmac: dwmac-loongson: fix missing of_node_put() while module exitingYang Yingliang1-5/+14
The node returned by of_get_child_by_name() with refcount decremented, of_node_put() needs be called when finish using it. So add it in the error path in loongson_dwmac_probe() and in loongson_dwmac_remove(). Fixes: 2ae34111fe4e ("stmmac: dwmac-loongson: fix invalid mdio_node") Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-11-10stmmac: dwmac-loongson: fix missing pci_disable_device() in ↵Yang Yingliang1-2/+5
loongson_dwmac_probe() Add missing pci_disable_device() in the error path in loongson_dwmac_probe(). Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-11-10stmmac: dwmac-loongson: fix missing pci_disable_msi() while module exitingYang Yingliang1-1/+12
pci_enable_msi() has been called in loongson_dwmac_probe(), so pci_disable_msi() needs be called in remove path and error path of probe(). Fixes: 30bba69d7db4 ("stmmac: pci: Add dwmac support for Loongson") Signed-off-by: Yang Yingliang <[email protected]> Signed-off-by: Paolo Abeni <[email protected]>
2022-11-10ALSA: usb-audio: add quirk to fix Hamedal C20 disconnect issueAi Chao3-1/+7
For Hamedal C20, the current rate is different from the runtime rate, snd_usb_endpoint stop and close endpoint to resetting rate. if snd_usb_endpoint close the endpoint, sometimes usb will disconnect the device. Signed-off-by: Ai Chao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-11-10Merge tag 'amd-drm-fixes-6.1-2022-11-09' of ↵Dave Airlie25-103/+171
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes amd-drm-fixes-6.1-2022-11-09: amdgpu: - SMU 13.0.4 update - GPUVM TLB race fix - DCN 3.1.4 fixes - DCN 3.2.x fixes - Vega10 fan fix - BACO fix for Beige Goby board - PSR fix - GPU VM PT locking fixes amdkfd: - CRIU fixes Signed-off-by: Dave Airlie <[email protected]> From: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-11-10ALSA: hda/realtek: Add Positivo C6300 model quirkEdson Juliano Drosdeck1-0/+1
Positivo Master C6300 (1849:a233) require quirk for anabling headset-mic Signed-off-by: Edson Juliano Drosdeck <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-11-09cxgb4vf: shut down the adapter when t4vf_update_port_info() failed in ↵Zhengchao Shao1-1/+1
cxgb4vf_open() When t4vf_update_port_info() failed in cxgb4vf_open(), resources applied during adapter goes up are not cleared. Fix it. Only be compiled, not be tested. Fixes: 18d79f721e0a ("cxgb4vf: Update port information in cxgb4vf_open()") Signed-off-by: Zhengchao Shao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-11-09mctp: Fix an error handling path in mctp_init()Wei Yongjun2-2/+4
If mctp_neigh_init() return error, the routes resources should be released in the error handling path. Otherwise some resources leak. Fixes: 4d8b9319282a ("mctp: Add neighbour implementation") Signed-off-by: Wei Yongjun <[email protected]> Acked-by: Matt Johnston <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-11-09stmmac: intel: Update PCH PTP clock rate from 200MHz to 204.8MHzTan, Tee Min1-2/+9
Current Intel platform has an output of ~976ms interval when probed on 1 Pulse-per-Second(PPS) hardware pin. The correct PTP clock frequency for PCH GbE should be 204.8MHz instead of 200MHz. PSE GbE PTP clock rate remains at 200MHz. Fixes: 58da0cfa6cf1 ("net: stmmac: create dwmac-intel.c to contain all Intel platform") Signed-off-by: Ling Pei Lee <[email protected]> Signed-off-by: Tan, Tee Min <[email protected]> Signed-off-by: Voon Weifeng <[email protected]> Signed-off-by: Gan Yi Fang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-11-09net: cxgb3_main: disable napi when bind qsets failed in cxgb_up()Zhengchao Shao1-0/+1
When failed to bind qsets in cxgb_up() for opening device, napi isn't disabled. When open cxgb3 device next time, it will trigger a BUG_ON() in napi_enable(). Compile tested only. Fixes: 48c4b6dbb7e2 ("cxgb3 - fix port up/down error path") Signed-off-by: Zhengchao Shao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-11-09net: cpsw: disable napi in cpsw_ndo_open()Zhengchao Shao1-0/+2
When failed to create xdp rxqs or fill rx channels in cpsw_ndo_open() for opening device, napi isn't disabled. When open cpsw device next time, it will report a invalid opcode issue. Compiled tested only. Fixes: d354eb85d618 ("drivers: net: cpsw: dual_emac: simplify napi usage") Signed-off-by: Zhengchao Shao <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-11-09drm/amd/display: only fill dirty rectangles when PSR is enabledHamza Mahfooz1-3/+4
Currently, we are calling fill_dc_dirty_rects() even if PSR isn't supported by the relevant link in amdgpu_dm_commit_planes(), this is undesirable especially because when drm.debug is enabled we are printing messages in fill_dc_dirty_rects() that are only useful for debugging PSR (and confusing otherwise). So, we can instead limit the filling of dirty rectangles to only when PSR is enabled. Reviewed-by: Leo Li <[email protected]> Signed-off-by: Hamza Mahfooz <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-11-09drm/amdgpu: disable BACO on special BEIGE_GOBY cardGuchun Chen1-1/+3
Still avoid intermittent failure. Signed-off-by: Guchun Chen <[email protected]> Reviewed-by: Lijo Lazar <[email protected]> Acked-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-11-09drm/amdgpu: Drop eviction lock when allocating PT BOPhilip Yang3-26/+28
Re-take the eviction lock immediately again after the allocation is completed, to fix circular locking warning with drm_buddy allocator. Move amdgpu_vm_eviction_lock/unlock/trylock to amdgpu_vm.h as they are called from multiple files. Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-11-09drm/amdgpu: Unlock bo_list_mutex after error handlingPhilip Yang1-0/+1
Get below kernel WARNING backtrace when pressing ctrl-C to kill kfdtest application. If amdgpu_cs_parser_bos returns error after taking bo_list_mutex, as caller amdgpu_cs_ioctl will not unlock bo_list_mutex, this generates the kernel WARNING. Add unlock bo_list_mutex after amdgpu_cs_parser_bos error handling to cleanup bo_list userptr bo. WARNING: kfdtest/2930 still has locks held! 1 lock held by kfdtest/2930: (&list->bo_list_mutex){+.+.}-{3:3}, at: amdgpu_cs_ioctl+0xce5/0x1f10 [amdgpu] stack backtrace: dump_stack_lvl+0x44/0x57 get_signal+0x79f/0xd00 arch_do_signal_or_restart+0x36/0x7b0 exit_to_user_mode_prepare+0xfd/0x1b0 syscall_exit_to_user_mode+0x19/0x40 do_syscall_64+0x40/0x80 Signed-off-by: Philip Yang <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-11-09Revert "drm/amdgpu: Revert "drm/amdgpu: getting fan speed pwm for vega10 ↵Asher Song1-13/+12
properly"" This reverts commit 4545ae2ed3f2f7c3f615a53399c9c8460ee5bca7. The origin patch "drm/amdgpu: getting fan speed pwm for vega10 properly" works fine. Test failure is caused by test case self. Signed-off-by: Asher Song <[email protected]> Reviewed-by: Guchun Chen <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-11-09drm/amd/display: Enforce minimum prefetch time for low memclk on DCN32Dillon Varone10-2/+26
[WHY?] Data return times when using lowest memclk can be <= 60us, which can cause underflow on high bandwidth displays with a workload. [HOW?] Enforce a minimum prefetch time during validation for low memclk modes. Reviewed-by: Jun Lei <[email protected]> Acked-by: Alan Liu <[email protected]> Signed-off-by: Dillon Varone <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-11-09drm/amd/display: Fix gpio port mapping issueSteve Su2-3/+20
[Why] 1. Port of gpio has different mapping. [How] 1. Add a dummy entry in mapping table. 2. Fix incorrect mask bit field access. Reviewed-by: Alvin Lee <[email protected]> Acked-by: Alan Liu <[email protected]> Signed-off-by: Steve Su <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-11-09drm/amd/display: Fix reg timeout in enc314_enable_fifoNicholas Kazlauskas1-6/+18
[Why] The link enablement sequence can end up resetting the encoder while the PHY symclk isn't yet on. This means that waiting for symclk on will timeout, along with the reset bit never asserting high. This causes unnecessary delay when enabling the link and produces a warning affecting multiple IGT tests. [How] Don't wait for the symclk to be on here because firmware already does. Don't wait for reset if we know the symclk isn't on. Split the reset into a helper function that checks the bit and decides whether or not a delay is sufficient. Reviewed-by: Roman Li <[email protected]> Acked-by: Alan Liu <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 6.0.x
2022-11-09drm/amd/display: Fix FCLK deviation and tool compile issuesChaitanya Dhere2-2/+2
[Why] Recent backports from open source do not have header inclusion pattern that is consistent with inclusion style in the rest of the file. This breaks the internal tool builds as well. A recent commit erronously modified the original DML formula for calculating ActiveClockChangeLatencyHidingY. This resulted in a FCLK deviation from the golden values. [How] Change the way in which display_mode_vba.h is included so that it is consistent with the inclusion style in rest of the file which also fixes the tool build. Restore the DML formula to its original state to fix the FCLK deviation. Reviewed-by: Aurabindo Pillai <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Alan Liu <[email protected]> Signed-off-by: Chaitanya Dhere <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-11-09drm/amd/display: Zeromem mypipe heap struct before using itAurabindo Pillai1-0/+1
[Why&How] Bug was caused when moving variable from stack to heap because it was reusable and garbage was left over, so we need to zero mem. Reviewed-by: Martin Leung <[email protected]> Acked-by: Alan Liu <[email protected]> Signed-off-by: Aurabindo Pillai <[email protected]> Signed-off-by: Martin Leung <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-11-09drm/amd/display: Update SR watermarks for DCN314Nicholas Kazlauskas2-18/+18
[Why & How] New values requested by hardware after fine-tuning. Update for all memory types. Reviewed-by: Jun Lei <[email protected]> Acked-by: Alan Liu <[email protected]> Signed-off-by: Nicholas Kazlauskas <[email protected]> Tested-by: Daniel Wheeler <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 6.0.x
2022-11-09drm/amdgpu: workaround for TLB seq raceChristian König1-0/+15
It can happen that we query the sequence value before the callback had a chance to run. Workaround that by grabbing the fence lock and releasing it again. Should be replaced by hw handling soon. Signed-off-by: Christian König <[email protected]> CC: [email protected] # 5.19+ Fixes: 5255e146c99a6 ("drm/amdgpu: rework TLB flushing") Link: https://gitlab.freedesktop.org/drm/amd/-/issues/2113 Acked-by: Alex Deucher <[email protected]> Acked-by: Philip Yang <[email protected]> Tested-by: Stefan Springer <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-11-09drm/amdkfd: Fix error handling in criu_checkpointFelix Kuehling1-19/+15
Checkpoint BOs last. That way we don't need to close dmabuf FDs if something else fails later. This avoids problematic access to user mode memory in the error handling code path. criu_checkpoint_bos has its own error handling and cleanup that does not depend on access to user memory. In the private data, keep BOs before the remaining objects. This is necessary to restore things in the correct order as restoring events depends on the events-page BO being restored first. Fixes: be072b06c739 ("drm/amdkfd: CRIU export BOs as prime dmabuf objects") Reported-by: Jann Horn <[email protected]> CC: Rajneesh Bhardwaj <[email protected]> Signed-off-by: Felix Kuehling <[email protected]> Reviewed-and-tested-by: Rajneesh Bhardwaj <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-11-09drm/amdkfd: Fix error handling in kfd_criu_restore_eventsFelix Kuehling1-2/+1
mutex_unlock before the exit label because all the error code paths that jump there didn't take that lock. This fixes unbalanced locking errors in case of restore errors. Fixes: 40e8a766a761 ("drm/amdkfd: CRIU checkpoint and restore events") Signed-off-by: Felix Kuehling <[email protected]> Reviewed-by: Rajneesh Bhardwaj <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-11-09drm/amd/pm: update SMU IP v13.0.4 msg interface headerTim Huang1-8/+7
Some of the unused messages that were used earlier in development have been freed up as spare messages, no intended functional changes. Signed-off-by: Mario Limonciello <[email protected]> Signed-off-by: Tim Huang <[email protected]> Acked-by: Alex Deucher <[email protected]> Reviewed-by: Yifan Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] # 6.0.x
2022-11-09iavf: Fix VF driver counting VLAN 0 filtersMichal Jaron1-0/+2
VF driver mistakenly counts VLAN 0 filters, when no PF driver counts them. Do not count VLAN 0 filters, when VLAN_V2 is engaged. Counting those filters in, will affect filters size by -1, when sending batched VLAN addition message. Fixes: 968996c070ef ("iavf: Fix VLAN_V2 addition/rejection") Signed-off-by: Przemyslaw Patynowski <[email protected]> Signed-off-by: Michal Jaron <[email protected]> Signed-off-by: Kamil Maziarz <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-11-09ice: Fix spurious interrupt during removal of trusted VFNorbert Zulinski4-2/+31
Previously, during removal of trusted VF when VF is down there was number of spurious interrupt equal to number of queues on VF. Add check if VF already has inactive queues. If VF is disabled and has inactive rx queues then do not disable rx queues. Add check in ice_vsi_stop_tx_ring if it's VF's vsi and if VF is disabled. Fixes: efe41860008e ("ice: Fix memory corruption in VF driver") Signed-off-by: Norbert Zulinski <[email protected]> Signed-off-by: Mateusz Palczewski <[email protected]> Tested-by: Konrad Jankowski <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-11-09Merge tag 'slab-for-6.1-rc4-fixes' of ↵Linus Torvalds2-43/+4
git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab Pull slab fixes from Vlastimil Babka: "Most are small fixups as described below. The !CONFIG_TRACING fix is a bit bigger and would normally be done in the next merge window as part of upcoming hardening changes. But we realized it can make the kmalloc waste tracking introduced in this window inaccurate, so decided to go with it now. Summary: - Remove !CONFIG_TRACING kmalloc() wrappers intended to save a function call, due to incompatilibity with recently introduced wasted space tracking and planned hardening changes. - A tracing parameter regression fix, by Kees Cook. - Two kernel-doc warning fixups, by Lukas Bulwahn and myself * tag 'slab-for-6.1-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vbabka/slab: mm, slab: remove duplicate kernel-doc comment for ksize() mm/slab_common: Restore passing "caller" for tracing mm/slab: remove !CONFIG_TRACING variants of kmalloc_[node_]trace() mm/slab_common: repair kernel-doc for __ksize()
2022-11-09net/mlx5e: TC, Fix slab-out-of-bounds in parse_tc_actionsRoi Dayan1-2/+6
esw_attr is only allocated if namespace is fdb. BUG: KASAN: slab-out-of-bounds in parse_tc_actions+0xdc6/0x10e0 [mlx5_core] Write of size 4 at addr ffff88815f185b04 by task tc/2135 CPU: 5 PID: 2135 Comm: tc Not tainted 6.1.0-rc2+ #2 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x57/0x7d print_report+0x170/0x471 ? parse_tc_actions+0xdc6/0x10e0 [mlx5_core] kasan_report+0xbc/0xf0 ? parse_tc_actions+0xdc6/0x10e0 [mlx5_core] parse_tc_actions+0xdc6/0x10e0 [mlx5_core] Fixes: 94d651739e17 ("net/mlx5e: TC, Fix cloned flow attr instance dests are not zeroed") Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09net/mlx5e: E-Switch, Fix comparing termination table instanceRoi Dayan1-6/+8
The pkt_reformat pointer being saved under flow_act and not dest attribute in the termination table instance. Fix the comparison pointers. Also fix returning success if one pkt_reformat pointer is null and the other is not. Fixes: 249ccc3c95bd ("net/mlx5e: Add support for offloading traffic from uplink to uplink") Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Chris Mi <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09net/mlx5e: TC, Fix wrong rejection of packet-per-second policingJianbo Liu1-6/+0
In the bellow commit, we added support for PPS policing without removing the check which block offload of such cases. Fix it by removing this check. Fixes: a8d52b024d6d ("net/mlx5e: TC, Support offloading police action") Signed-off-by: Jianbo Liu <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09net/mlx5e: Fix tc acts array not to be dependent on enum orderRoi Dayan1-60/+32
The tc acts array should not be dependent on kernel internal flow action id enum. Fix the array initialization. Fixes: fad547906980 ("net/mlx5e: Add tc action infrastructure") Signed-off-by: Roi Dayan <[email protected]> Reviewed-by: Maor Dickman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09net/mlx5e: Fix usage of DMA sync APIMaxim Mikityanskiy2-15/+16
DMA sync functions should use the same direction that was used by DMA mapping. Use DMA_BIDIRECTIONAL for XDP_TX from regular RQ, which reuses the same mapping that was used for RX, and DMA_TO_DEVICE for XDP_TX from XSK RQ and XDP_REDIRECT, which establish a new mapping in this direction. On the RX side, use the same direction that was used when setting up the mapping (DMA_BIDIRECTIONAL for XDP, DMA_FROM_DEVICE otherwise). Also don't skip sync for device when establishing a DMA_FROM_DEVICE mapping for RX, as some architectures (ARM) may require invalidating caches before the device can use the mapping. It doesn't break the bugfix made in commit 0b7cfa4082fb ("net/mlx5e: Fix page DMA map/unmap attributes"), since the bug happened on unmap. Fixes: 0b7cfa4082fb ("net/mlx5e: Fix page DMA map/unmap attributes") Fixes: b5503b994ed5 ("net/mlx5e: XDP TX forwarding support") Signed-off-by: Maxim Mikityanskiy <[email protected]> Reviewed-by: Gal Pressman <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09net/mlx5e: Add missing sanity checks for max TX WQE sizeMaxim Mikityanskiy3-1/+35
The commit cited below started using the firmware capability for the maximum TX WQE size. This commit adds an important check to verify that the driver doesn't attempt to exceed this capability, and also restores another check mistakenly removed in the cited commit (a WQE must not exceed the page size). Fixes: c27bd1718c06 ("net/mlx5e: Read max WQEBBs on the SQ from firmware") Signed-off-by: Maxim Mikityanskiy <[email protected]> Reviewed-by: Tariq Toukan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09net/mlx5: fw_reset: Don't try to load device in case PCI isn't workingShay Drory1-1/+2
In case PCI reads fail after unload, there is no use in trying to load the device. Fixes: 5ec697446f46 ("net/mlx5: Add support for devlink reload action fw activate") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09net/mlx5: E-switch, Set to legacy mode if failed to change switchdev modeChris Mi2-21/+11
No need to rollback to the other mode because probably will fail again. Just set to legacy mode and clear fdb table created flag. So that fdb table will not be cleared again. Fixes: f019679ea5f2 ("net/mlx5: E-switch, Remove dependency between sriov and eswitch mode") Signed-off-by: Chris Mi <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09net/mlx5: Allow async trigger completion execution on single CPU systemsRoy Novich1-3/+8
For a single CPU system, the kernel thread executing mlx5_cmd_flush() never releases the CPU but calls down_trylock(&cmd→sem) in a busy loop. On a single processor system, this leads to a deadlock as the kernel thread which executes mlx5_cmd_invoke() never gets scheduled. Fix this, by adding the cond_resched() call to the loop, allow the command completion kernel thread to execute. Fixes: 8e715cd613a1 ("net/mlx5: Set command entry semaphore up once got index free") Signed-off-by: Alexander Schmidt <[email protected]> Signed-off-by: Roy Novich <[email protected]> Reviewed-by: Moshe Shemesh <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09net/mlx5: Bridge, verify LAG state when adding bond to bridgeVlad Buslov1-0/+31
Mlx5 LAG is initialized asynchronously on a workqueue which means that for a brief moment after setting mlx5 UL representors as lower devices of a bond netdevice the LAG itself is not fully initialized in the driver. When adding such bond device to a bridge mlx5 bridge code will not consider it as offload-capable, skip creating necessary bookkeeping and fail any further bridge offload-related commands with it (setting VLANs, offloading FDBs, etc.). In order to make the error explicit during bridge initialization stage implement the code that detects such condition during NETDEV_PRECHANGEUPPER event and returns an error. Fixes: ff9b7521468b ("net/mlx5: Bridge, support LAG") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Roi Dayan <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-11-09scripts/min-tool-version.sh: raise minimum clang version to 15.0.0 for s390Heiko Carstens1-1/+1
Before version 15.0.0 llvm's integrated assembler may silently generate corrupted code on s390. See e.g. commit e9953b729b78 ("s390/boot: workaround llvm IAS bug") for further details. While there have been workarounds applied for all known existing locations, there is nothing that prevents that new code with problematic patterns will be added. Therefore raise the minimum clang version to 15.0.0. Note that llvm commit e547b04d5b2c ("[SystemZ] Bugfix for symbolic displacements."), which is included in 15.0.0, fixes the broken code generation. Signed-off-by: Heiko Carstens <[email protected]> Acked-by: Nathan Chancellor <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexander Gordeev <[email protected]>
2022-11-09Merge tag 'kvm-s390-master-6.1-1' of ↵Paolo Bonzini251-1718/+3474
https://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD A PCI allocation fix and a PV clock fix.
2022-11-09KVM: x86/pmu: Limit the maximum number of supported AMD GP countersLike Xu3-3/+8
The AMD PerfMonV2 specification allows for a maximum of 16 GP counters, but currently only 6 pairs of MSRs are accepted by KVM. While AMD64_NUM_COUNTERS_CORE is already equal to 6, increasing without adjusting msrs_to_save_all[] could result in out-of-bounds accesses. Therefore introduce a macro (named KVM_AMD_PMC_MAX_GENERIC) to refer to the number of counters supported by KVM. Signed-off-by: Like Xu <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.