aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-10-28KVM: arm64: ARM_SMCCC_ARCH_WORKAROUND_1 doesn't return SMCCC_RET_NOT_REQUIREDStephen Boyd3-3/+3
According to the SMCCC spec[1](7.5.2 Discovery) the ARM_SMCCC_ARCH_WORKAROUND_1 function id only returns 0, 1, and SMCCC_RET_NOT_SUPPORTED. 0 is "workaround required and safe to call this function" 1 is "workaround not required but safe to call this function" SMCCC_RET_NOT_SUPPORTED is "might be vulnerable or might not be, who knows, I give up!" SMCCC_RET_NOT_SUPPORTED might as well mean "workaround required, except calling this function may not work because it isn't implemented in some cases". Wonderful. We map this SMC call to 0 is SPECTRE_MITIGATED 1 is SPECTRE_UNAFFECTED SMCCC_RET_NOT_SUPPORTED is SPECTRE_VULNERABLE For KVM hypercalls (hvc), we've implemented this function id to return SMCCC_RET_NOT_SUPPORTED, 0, and SMCCC_RET_NOT_REQUIRED. One of those isn't supposed to be there. Per the code we call arm64_get_spectre_v2_state() to figure out what to return for this feature discovery call. 0 is SPECTRE_MITIGATED SMCCC_RET_NOT_REQUIRED is SPECTRE_UNAFFECTED SMCCC_RET_NOT_SUPPORTED is SPECTRE_VULNERABLE Let's clean this up so that KVM tells the guest this mapping: 0 is SPECTRE_MITIGATED 1 is SPECTRE_UNAFFECTED SMCCC_RET_NOT_SUPPORTED is SPECTRE_VULNERABLE Note: SMCCC_RET_NOT_AFFECTED is 1 but isn't part of the SMCCC spec Fixes: c118bbb52743 ("arm64: KVM: Propagate full Spectre v2 workaround state to KVM guests") Signed-off-by: Stephen Boyd <[email protected]> Acked-by: Marc Zyngier <[email protected]> Acked-by: Will Deacon <[email protected]> Cc: Andre Przywara <[email protected]> Cc: Steven Price <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: [email protected] Link: https://developer.arm.com/documentation/den0028/latest [1] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2020-10-28mmc: sdhci-of-esdhc: make sure delay chain locked for HS400Yangbo Lu2-0/+19
For eMMC HS400 mode initialization, the DLL reset is a required step if DLL is enabled to use previously, like in bootloader. This step has not been documented in reference manual, but the RM will be fixed sooner or later. This patch is to add the step of DLL reset, and make sure delay chain locked for HS400. Signed-off-by: Yangbo Lu <[email protected]> Acked-by: Adrian Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Fixes: 54e08d9a95ca ("mmc: sdhci-of-esdhc: add hs400 mode support") Cc: [email protected] Signed-off-by: Ulf Hansson <[email protected]>
2020-10-28usb: cdns3: Variable 'length' set but not usedPawel Laszczak1-2/+0
Patch removes not used variable 'length' from cdns3_wa2_descmiss_copy_data function. Fixes: 141e70fef4ee ("usb: cdns3: gadget: need to handle sg case for workaround 2 case") Acked-by: Roger Quadros <[email protected]> Signed-off-by: Pawel Laszczak <[email protected]> Signed-off-by: Peter Chen <[email protected]>
2020-10-27null_blk: synchronization fix for zoned deviceKanchan Joshi2-4/+19
Parallel write,read,zone-mgmt operations accessing/altering zone state and write-pointer may get into race. Avoid the situation by using a new spinlock for zoned device. Concurrent zone-appends (on a zone) returning same write-pointer issue is also avoided using this lock. Cc: [email protected] Fixes: e0489ed5daeb ("null_blk: Support REQ_OP_ZONE_APPEND") Signed-off-by: Kanchan Joshi <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2020-10-27net: protect tcf_block_unbind with block lockLeon Romanovsky1-2/+2
The tcf_block_unbind() expects that the caller will take block->cb_lock before calling it, however the code took RTNL lock and dropped cb_lock instead. This causes to the following kernel panic. WARNING: CPU: 1 PID: 13524 at net/sched/cls_api.c:1488 tcf_block_unbind+0x2db/0x420 Modules linked in: mlx5_ib mlx5_core mlxfw ptp pps_core act_mirred act_tunnel_key cls_flower vxlan ip6_udp_tunnel udp_tunnel dummy sch_ingress openvswitch nsh xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink xt_addrtype iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad ib_ipoib rdma_cm iw_cm ib_cm ib_uverbs ib_core overlay [last unloaded: mlxfw] CPU: 1 PID: 13524 Comm: test-ecmp-add-v Tainted: G W 5.9.0+ #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:tcf_block_unbind+0x2db/0x420 Code: ff 48 83 c4 40 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8d bc 24 30 01 00 00 be ff ff ff ff e8 7d 7f 70 00 85 c0 0f 85 7b fd ff ff <0f> 0b e9 74 fd ff ff 48 c7 c7 dc 6a 24 84 e8 02 ec fe fe e9 55 fd RSP: 0018:ffff888117d17968 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff88812f713c00 RCX: 1ffffffff0848d5b RDX: 0000000000000001 RSI: ffff88814fbc8130 RDI: ffff888107f2b878 RBP: 1ffff11022fa2f3f R08: 0000000000000000 R09: ffffffff84115a87 R10: fffffbfff0822b50 R11: ffff888107f2b898 R12: ffff88814fbc8000 R13: ffff88812f713c10 R14: ffff888117d17a38 R15: ffff88814fbc80c0 FS: 00007f6593d36740(0000) GS:ffff8882a4f00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00005607a00758f8 CR3: 0000000131aea006 CR4: 0000000000170ea0 Call Trace: tc_block_indr_cleanup+0x3e0/0x5a0 ? tcf_block_unbind+0x420/0x420 ? __mutex_unlock_slowpath+0xe7/0x610 flow_indr_dev_unregister+0x5e2/0x930 ? mlx5e_restore_tunnel+0xdf0/0xdf0 [mlx5_core] ? mlx5e_restore_tunnel+0xdf0/0xdf0 [mlx5_core] ? flow_indr_block_cb_alloc+0x3c0/0x3c0 ? mlx5_db_free+0x37c/0x4b0 [mlx5_core] mlx5e_cleanup_rep_tx+0x8b/0xc0 [mlx5_core] mlx5e_detach_netdev+0xe5/0x120 [mlx5_core] mlx5e_vport_rep_unload+0x155/0x260 [mlx5_core] esw_offloads_disable+0x227/0x2b0 [mlx5_core] mlx5_eswitch_disable_locked.cold+0x38e/0x699 [mlx5_core] mlx5_eswitch_disable+0x94/0xf0 [mlx5_core] mlx5_device_disable_sriov+0x183/0x1f0 [mlx5_core] mlx5_core_sriov_configure+0xfd/0x230 [mlx5_core] sriov_numvfs_store+0x261/0x2f0 ? sriov_drivers_autoprobe_store+0x110/0x110 ? sysfs_file_ops+0x170/0x170 ? sysfs_file_ops+0x117/0x170 ? sysfs_file_ops+0x170/0x170 kernfs_fop_write+0x1ff/0x3f0 ? rcu_read_lock_any_held+0x6e/0x90 vfs_write+0x1f3/0x620 ksys_write+0xf9/0x1d0 ? __x64_sys_read+0xb0/0xb0 ? lockdep_hardirqs_on_prepare+0x273/0x3f0 ? syscall_enter_from_user_mode+0x1d/0x50 do_syscall_64+0x2d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 <...> ---[ end trace bfdd028ada702879 ]--- Fixes: 0fdcf78d5973 ("net: use flow_indr_dev_setup_offload()") Signed-off-by: Leon Romanovsky <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-27ibmveth: Fix use of ibmveth in a bridge.Thomas Bogendoerfer1-6/+0
The check for src mac address in ibmveth_is_packet_unsupported is wrong. Commit 6f2275433a2f wanted to shut down messages for loopback packets, but now suppresses bridged frames, which are accepted by the hypervisor otherwise bridging won't work at all. Fixes: 6f2275433a2f ("ibmveth: Detect unsupported packets before sending to the hypervisor") Signed-off-by: Michal Suchanek <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-27net/sched: act_mpls: Add softdep on mpls_gso.koGuillaume Nault1-0/+1
TCA_MPLS_ACT_PUSH and TCA_MPLS_ACT_MAC_PUSH might be used on gso packets. Such packets will thus require mpls_gso.ko for segmentation. v2: Drop dependency on CONFIG_NET_MPLS_GSO in Kconfig (from Jakub and David). Fixes: 2a2ea50870ba ("net: sched: add mpls manipulation actions to TC") Signed-off-by: Guillaume Nault <[email protected]> Link: https://lore.kernel.org/r/1f6cab15bbd15666795061c55563aaf6a386e90e.1603708007.git.gnault@redhat.com Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-27ravb: Fix bit fields checking in ravb_hwtstamp_get()Andrew Gabbasov1-3/+7
In the function ravb_hwtstamp_get() in ravb_main.c with the existing values for RAVB_RXTSTAMP_TYPE_V2_L2_EVENT (0x2) and RAVB_RXTSTAMP_TYPE_ALL (0x6) if (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE_V2_L2_EVENT) config.rx_filter = HWTSTAMP_FILTER_PTP_V2_L2_EVENT; else if (priv->tstamp_rx_ctrl & RAVB_RXTSTAMP_TYPE_ALL) config.rx_filter = HWTSTAMP_FILTER_ALL; if the test on RAVB_RXTSTAMP_TYPE_ALL should be true, it will never be reached. This issue can be verified with 'hwtstamp_config' testing program (tools/testing/selftests/net/hwtstamp_config.c). Setting filter type to ALL and subsequent retrieving it gives incorrect value: $ hwtstamp_config eth0 OFF ALL flags = 0 tx_type = OFF rx_filter = ALL $ hwtstamp_config eth0 flags = 0 tx_type = OFF rx_filter = PTP_V2_L2_EVENT Correct this by converting if-else's to switch. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Reported-by: Julia Lawall <[email protected]> Signed-off-by: Andrew Gabbasov <[email protected]> Reviewed-by: Sergei Shtylyov <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-27devlink: Unlock on error in dumpit()Dan Carpenter1-2/+4
This needs to unlock before returning. Fixes: 544e7c33ec2f ("net: devlink: Add support for port regions") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/20201026080127.GB1628785@mwanda Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-27devlink: Fix some error codesDan Carpenter1-9/+15
These paths don't set the error codes. It's especially important in devlink_nl_region_notify_build() where it leads to a NULL dereference in the caller. Fixes: 544e7c33ec2f ("net: devlink: Add support for port regions") Signed-off-by: Dan Carpenter <[email protected]> Link: https://lore.kernel.org/r/20201026080059.GA1628785@mwanda Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-27chelsio/chtls: fix memory leaks in CPL handlersVinay Kumar Yadav1-15/+12
CPL handler functions chtls_pass_open_rpl() and chtls_close_listsrv_rpl() should return CPL_RET_BUF_DONE so that caller function will do skb free to avoid leak. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-27chelsio/chtls: fix deadlock issueVinay Kumar Yadav1-2/+0
In chtls_pass_establish() we hold child socket lock using bh_lock_sock and we are again trying bh_lock_sock in add_to_reap_list, causing deadlock. Remove bh_lock_sock in add_to_reap_list() as lock is already held. Fixes: cc35c88ae4db ("crypto : chtls - CPL handler definition") Signed-off-by: Vinay Kumar Yadav <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2020-10-27x86/debug: Fix DR_STEP vs ptrace_get_debugreg(6)Peter Zijlstra1-3/+6
Commit d53d9bc0cf78 ("x86/debug: Change thread.debugreg6 to thread.virtual_dr6") changed the semantics of the variable from random collection of bits, to exactly only those bits that ptrace() needs. Unfortunately this lost DR_STEP for PTRACE_{BLOCK,SINGLE}STEP. Furthermore, it turns out that userspace expects DR_STEP to be unconditionally available, even for manual TF usage outside of PTRACE_{BLOCK,SINGLE}_STEP. Fixes: d53d9bc0cf78 ("x86/debug: Change thread.debugreg6 to thread.virtual_dr6") Reported-by: Kyle Huey <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Kyle Huey <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-27x86/debug: Only clear/set ->virtual_dr6 for userspace #DBPeter Zijlstra1-6/+6
The ->virtual_dr6 is the value used by ptrace_{get,set}_debugreg(6). A kernel #DB clearing it could mean spurious malfunction of ptrace() expectations. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Kyle Huey <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-27x86/debug: Fix BTF handlingPeter Zijlstra1-7/+21
The SDM states that #DB clears DEBUGCTLMSR_BTF, this means that when the bit is set for userspace (TIF_BLOCKSTEP) and a kernel #DB happens first, the BTF bit meant for userspace execution is lost. Have the kernel #DB handler restore the BTF bit when it was requested for userspace. Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Kyle Huey <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-27afs: Fix afs_launder_page to not clear PG_writebackDavid Howells2-4/+7
Fix afs_launder_page() to not clear PG_writeback on the page it is laundering as the flag isn't set in this case. Fixes: 4343d00872e1 ("afs: Get rid of the afs_writeback record") Signed-off-by: David Howells <[email protected]>
2020-10-27afs: Fix a use after free in afs_xattr_get_acl()Dan Carpenter1-1/+1
The "op" pointer is freed earlier when we call afs_put_operation(). Fixes: e49c7b2f6de7 ("afs: Build an abstraction around an "operation" concept") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David Howells <[email protected]> cc: Colin Ian King <[email protected]>
2020-10-27afs: Fix tracing deref-before-checkDavid Howells1-1/+2
The patch dca54a7bbb8c: "afs: Add tracing for cell refcount and active user count" from Oct 13, 2020, leads to the following Smatch complaint: fs/afs/cell.c:596 afs_unuse_cell() warn: variable dereferenced before check 'cell' (see line 592) Fix this by moving the retrieval of the cell debug ID to after the check of the validity of the cell pointer. Reported-by: Dan Carpenter <[email protected]> Fixes: dca54a7bbb8c ("afs: Add tracing for cell refcount and active user count") Signed-off-by: David Howells <[email protected]> cc: Dan Carpenter <[email protected]>
2020-10-27afs: Fix copy_file_range()David Howells1-0/+1
The prevention of splice-write without explicit ops made the copy_file_write() syscall to an afs file (as done by the generic/112 xfstest) fail with EINVAL. Fix by using iter_file_splice_write() for afs. Fixes: 36e2c7421f02 ("fs: don't allow splice read/write without explicit ops") Signed-off-by: David Howells <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]>
2020-10-27Merge tag 'x86-urgent-2020-10-27' of ↵Linus Torvalds5-15/+25
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A couple of x86 fixes which missed rc1 due to my stupidity: - Drop lazy TLB mode before switching to the temporary address space for text patching. text_poke() switches to the temporary mm which clears the lazy mode and restores the original mm afterwards. Due to clearing lazy mode this might restore a already dead mm if exit_mmap() runs in parallel on another CPU. - Document the x32 syscall design fail vs. syscall numbers 512-547 properly. - Fix the ORC unwinder to handle the inactive task frame correctly. This was unearthed due to the slightly different code generation of gcc-10. - Use an up to date screen_info for the boot params of kexec instead of the possibly stale and invalid version which happened to be valid when the kexec kernel was loaded" * tag 'x86-urgent-2020-10-27' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/alternative: Don't call text_poke() in lazy TLB mode x86/syscalls: Document the fact that syscalls 512-547 are a legacy mistake x86/unwind/orc: Fix inactive tasks with stack pointer in %sp on GCC 10 compiled kernels hyperv_fb: Update screen_info after removing old framebuffer x86/kexec: Use up-to-dated screen_info copy to fill boot params
2020-10-27drm/vc4: hdmi: Avoid sleeping in atomic contextMaxime Ripard1-2/+3
When running the trigger hook, ALSA by default will take a spinlock, and thus will run the trigger hook in atomic context. However, our HDMI driver will send the infoframes as part of the trigger hook, and part of that process is to wait for a bit to be cleared for up to 100ms. To be nicer to the system, that wait has some usleep_range that interact poorly with the atomic context. There's several ways we can fix this, but the more obvious one is to make ALSA take a mutex instead by setting the nonatomic flag on the DAI link. That doesn't work though, since now the cyclic callback installed by the dmaengine helpers in ALSA will take a mutex, while that callback is run by dmaengine's virt-chan code in a tasklet where sleeping is not allowed either. Given the delay we need to poll the bit for, changing the usleep_range for a udelay and keep running it from a context where interrupts are disabled is not really a good option either. However, we can move the infoframe setup code in the hw_params hook, like is usually done in other HDMI controllers, that isn't protected by a spinlock and thus where we can sleep. Infoframes will be sent on a regular basis anyway, and since hw_params is where the audio parameters that end up in the infoframes are setup, this also makes a bit more sense. Fixes: bb7d78568814 ("drm/vc4: Add HDMI audio support") Suggested-by: Mark Brown <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Reviewed-by: Mark Brown <[email protected]> Reviewed-by: Takashi Iwai <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-27Merge tag 'orphan-handling-v5.10-rc2' of ↵Linus Torvalds2-0/+5
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux Pull orphan section fixes from Kees Cook: "A couple corner cases were found from the link-time orphan section handling series: - arm: handle .ARM.exidx and .ARM.extab sections (Nathan Chancellor) - x86: collect .ctors.* with .ctors (Kees Cook)" * tag 'orphan-handling-v5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: arm/build: Always handle .ARM.exidx and .ARM.extab sections vmlinux.lds.h: Keep .ctors.* with .ctors
2020-10-27mm/process_vm_access: Add missing #include <linux/compat.h>Geert Uytterhoeven1-0/+1
With e.g. m68k/defconfig: mm/process_vm_access.c: In function ‘process_vm_rw’: mm/process_vm_access.c:277:5: error: implicit declaration of function ‘in_compat_syscall’ [-Werror=implicit-function-declaration] 277 | in_compat_syscall()); | ^~~~~~~~~~~~~~~~~ Fix this by adding #include <linux/compat.h>. Reported-by: [email protected] Reported-by: damian <[email protected]> Reported-by: Naresh Kamboju <[email protected]> Fixes: 38dc5079da7081e8 ("Fix compat regression in process_vm_rw()") Signed-off-by: Geert Uytterhoeven <[email protected]> Acked-by: Jens Axboe <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-10-27ACPI: NFIT: Fix comparison to '-ENXIO'Zhang Qilong1-1/+1
Initial value of rc is '-ENXIO', and we should use the initial value to check it. Signed-off-by: Zhang Qilong <[email protected]> Reviewed-by: Pankaj Gupta <[email protected]> Reviewed-by: Vishal Verma <[email protected]> [ rjw: Subject edit ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-10-27arm/build: Always handle .ARM.exidx and .ARM.extab sectionsNathan Chancellor1-0/+4
After turning on warnings for orphan section placement, enabling CONFIG_UNWINDER_FRAME_POINTER instead of CONFIG_UNWINDER_ARM causes thousands of warnings when clang + ld.lld are used: $ scripts/config --file arch/arm/configs/multi_v7_defconfig \ -d CONFIG_UNWINDER_ARM \ -e CONFIG_UNWINDER_FRAME_POINTER $ make -skj"$(nproc)" ARCH=arm CROSS_COMPILE=arm-linux-gnueabi- LLVM=1 defconfig zImage ld.lld: warning: init/built-in.a(main.o):(.ARM.extab) is being placed in '.ARM.extab' ld.lld: warning: init/built-in.a(main.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text' ld.lld: warning: init/built-in.a(main.o):(.ARM.extab.ref.text) is being placed in '.ARM.extab.ref.text' ld.lld: warning: init/built-in.a(do_mounts.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text' ld.lld: warning: init/built-in.a(do_mounts.o):(.ARM.extab) is being placed in '.ARM.extab' ld.lld: warning: init/built-in.a(do_mounts_rd.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text' ld.lld: warning: init/built-in.a(do_mounts_rd.o):(.ARM.extab) is being placed in '.ARM.extab' ld.lld: warning: init/built-in.a(do_mounts_initrd.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text' ld.lld: warning: init/built-in.a(initramfs.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text' ld.lld: warning: init/built-in.a(initramfs.o):(.ARM.extab) is being placed in '.ARM.extab' ld.lld: warning: init/built-in.a(calibrate.o):(.ARM.extab.init.text) is being placed in '.ARM.extab.init.text' ld.lld: warning: init/built-in.a(calibrate.o):(.ARM.extab) is being placed in '.ARM.extab' These sections are handled by the ARM_UNWIND_SECTIONS define, which is only added to the list of sections when CONFIG_ARM_UNWIND is set. CONFIG_ARM_UNWIND is a hidden symbol that is only selected when CONFIG_UNWINDER_ARM is set so CONFIG_UNWINDER_FRAME_POINTER never handles these sections. According to the help text of CONFIG_UNWINDER_ARM, these sections should be discarded so that the kernel image size is not affected. Fixes: 5a17850e251a ("arm/build: Warn on orphan section placement") Link: https://github.com/ClangBuiltLinux/linux/issues/1152 Reported-by: kernel test robot <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Review-by: Nick Desaulniers <[email protected]> Tested-by: Nick Desaulniers <[email protected]> [kees: Made the discard slightly more specific] Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-27ACPI: dock: fix enum-conversion warningArnd Bergmann1-1/+2
gcc points out a type mismatch: drivers/acpi/dock.c: In function 'hot_remove_dock_devices': drivers/acpi/dock.c:234:53: warning: implicit conversion from 'enum <anonymous>' to 'enum dock_callback_type' [-Wenum-conversion] 234 | dock_hotplug_event(dd, ACPI_NOTIFY_EJECT_REQUEST, false); This is harmless because 'false' still has the correct numeric value, but passing DOCK_CALL_HANDLER documents better what is going on and avoids the warning. Fixes: 37f908778f20 ("ACPI / dock: Walk list in reverse order during removal of devices") Fixes: f09ce741a03a ("ACPI / dock / PCI: Drop ACPI dock notifier chain") Signed-off-by: Arnd Bergmann <[email protected]> Reviewed-by: Hanjun Guo <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-10-27PNP: fix kernel-doc markupsMauro Carvalho Chehab1-2/+2
It sounds that there were function renames. Update the kernel-doc markups accordingly. Signed-off-by: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-10-27device property: Don't clear secondary pointer for shared primary firmware nodeAndy Shevchenko1-1/+3
It appears that firmware nodes can be shared between devices. In such case when a (child) device is about to be deleted, its firmware node may be shared and ACPI_COMPANION_SET(..., NULL) call for it breaks the secondary link of the shared primary firmware node. In order to prevent that, check, if the device has a parent and parent's firmware node is shared with its child, and avoid crashing the link. Fixes: c15e1bdda436 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()") Reported-by: Ferry Toth <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Tested-by: Ferry Toth <[email protected]> Cc: 5.9+ <[email protected]> # 5.9+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-10-27device property: Keep secondary firmware node secondary by typeAndy Shevchenko1-1/+1
Behind primary and secondary we understand the type of the nodes which might define their ordering. However, if primary node gone, we can't maintain the ordering by definition of the linked list. Thus, by ordering secondary node becomes first in the list. But in this case the meaning of it is still secondary (or auxiliary). The type of the node is maintained by the secondary pointer in it: secondary pointer Meaning NULL or valid primary node ERR_PTR(-ENODEV) secondary node So, if by some reason we do the following sequence of calls set_primary_fwnode(dev, NULL); set_primary_fwnode(dev, primary); we should preserve secondary node. This concept is supported by the description of set_primary_fwnode() along with implementation of set_secondary_fwnode(). Hence, fix the commit c15e1bdda436 to follow this as well. Fixes: c15e1bdda436 ("device property: Fix the secondary firmware node handling in set_primary_fwnode()") Cc: Ferry Toth <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Tested-by: Ferry Toth <[email protected]> Cc: 5.9+ <[email protected]> # 5.9+ Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-10-27vmlinux.lds.h: Keep .ctors.* with .ctorsKees Cook1-0/+1
Under some circumstances, the compiler generates .ctors.* sections. This is seen doing a cross compile of x86_64 from a powerpc64el host: x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/trace_clock.o' being placed in section `.ctors.65435' x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/ftrace.o' being placed in section `.ctors.65435' x86_64-linux-gnu-ld: warning: orphan section `.ctors.65435' from `kernel/trace/ring_buffer.o' being placed in section `.ctors.65435' Include these orphans along with the regular .ctors section. Reported-by: Stephen Rothwell <[email protected]> Tested-by: Stephen Rothwell <[email protected]> Fixes: 83109d5d5fba ("x86/build: Warn on orphan section placement") Signed-off-by: Kees Cook <[email protected]> Acked-by: Nick Desaulniers <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2020-10-27PM: sleep: fix typo in kernel/power/process.cJackie Zamow1-1/+1
Fix a typo in a comment in freeze_processes(). Signed-off-by: Jackie Zamow <[email protected]> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-10-27drm/amdgpu/pm: fix the fan speed in fan1_input in manual mode for navi1xAlex Deucher1-8/+3
It has been confirmed that the SMU metrics table should always reflect the current fan speed even in manual mode. Fixes: 3033e9f1c2de ("drm/amdgpu/swsmu: handle manual fan readback on SMU11") Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-27drm/amd/pm: fix the wrong fan speed in fan1_inputKenneth Feng1-8/+3
fix the wrong fan speed in fan1_input when the fan control mode is manual. the fan speed value is not correct when we set manual mode to fan1_enalbe - 1. since the fan speed in the metrics table always reflects the real fan speed,we can fetch the fan speed for both auto and manual mode. Signed-off-by: Kenneth Feng <[email protected]> Reviewed-by: Likun Gao <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-10-27drm/amdgpu/swsmu: drop smu i2c bus on navi1xAlex Deucher1-25/+0
Stop registering the SMU i2c bus on navi1x. This leads to instability issues when userspace processes mess with the bus and also seems to cause display stability issues in some cases. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1314 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1341 Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-10-27intel_idle: Fix max_cstate for processor models without C-state tablesChen Yu1-1/+1
Currently intel_idle driver gets the c-state information from ACPI _CST if the processor model is not recognized by it. However the c-state in _CST starts with index 1 which is different from the index in intel_idle driver's internal c-state table. While intel_idle_max_cstate_reached() was previously introduced to deal with intel_idle driver's internal c-state table, re-using this function directly on _CST is incorrect. Fix this by subtracting 1 from the index when checking max_cstate in the _CST case. For example, append intel_idle.max_cstate=1 in boot command line, Before the patch: grep . /sys/devices/system/cpu/cpu0/cpuidle/state*/name POLL After the patch: grep . /sys/devices/system/cpu/cpu0/cpuidle/state*/name /sys/devices/system/cpu/cpu0/cpuidle/state0/name:POLL /sys/devices/system/cpu/cpu0/cpuidle/state1/name:C1_ACPI Fixes: 18734958e9bf ("intel_idle: Use ACPI _CST for processor models without C-state tables") Reported-by: Pengfei Xu <[email protected]> Cc: 5.6+ <[email protected]> # 5.6+ Signed-off-by: Chen Yu <[email protected]> [ rjw: Changelog edits ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-10-27cpufreq: intel_pstate: Avoid missing HWP max updates in passive modeRafael J. Wysocki1-7/+6
If the cpufreq policy max limit is changed when intel_pstate operates in the passive mode with HWP enabled and the "powersave" governor is used on top of it, the HWP max limit is not updated as appropriate. Namely, in the "powersave" governor case, the target P-state is always equal to the policy min limit, so if the latter does not change, intel_cpufreq_adjust_hwp() is not invoked to update the HWP Request MSR due to the "target_pstate != old_pstate" check in intel_cpufreq_update_pstate(), so the HWP max limit is not updated as a result. Also, if the CPUFREQ_NEED_UPDATE_LIMITS flag is not set for the driver and the target frequency does not change along with the policy max limit, the "target_freq == policy->cur" check in __cpufreq_driver_target() prevents the driver's ->target() callback from being invoked at all, so the HWP max limit is not updated. To prevent that occurring, set the CPUFREQ_NEED_UPDATE_LIMITS flag in the intel_cpufreq driver structure if HWP is enabled and modify intel_cpufreq_update_pstate() to do the "target_pstate != old_pstate" check only in the non-HWP case and let intel_cpufreq_adjust_hwp() always run in the HWP case (it will update HWP Request only if the cached value of the register is different from the new one including the limits, so if neither the target P-state value nor the max limit changes, the register write will still be avoided). Fixes: f6ebbcf08f37 ("cpufreq: intel_pstate: Implement passive mode with HWP enabled") Reported-by: Zhang Rui <[email protected]> Cc: 5.9+ <[email protected]> # 5.9+: 1c534352f47f cpufreq: Introduce CPUFREQ_NEED_UPDATE_LIMITS ... Signed-off-by: Rafael J. Wysocki <[email protected]> Acked-by: Viresh Kumar <[email protected]> Tested-by: Zhang Rui <[email protected]>
2020-10-27cpufreq: Introduce CPUFREQ_NEED_UPDATE_LIMITS driver flagRafael J. Wysocki2-2/+11
Generally, a cpufreq driver may need to update some internal upper and lower frequency boundaries on policy max and min changes, respectively, but currently this does not work if the target frequency does not change along with the policy limit. Namely, if the target frequency does not change along with the policy min or max, the "target_freq == policy->cur" check in __cpufreq_driver_target() prevents driver callbacks from being invoked and they do not even have a chance to update the corresponding internal boundary. This particularly affects the "powersave" and "performance" governors that always set the target frequency to one of the policy limits and it never changes when the other limit is updated. To allow cpufreq the drivers needing to update internal frequency boundaries on policy limits changes to avoid this issue, introduce a new driver flag, CPUFREQ_NEED_UPDATE_LIMITS, that (when set) will neutralize the check mentioned above. Signed-off-by: Rafael J. Wysocki <[email protected]> Acked-by: Viresh Kumar <[email protected]>
2020-10-27cpufreq: Avoid configuring old governors as default with intel_pstateRafael J. Wysocki1-0/+2
Commit 33aa46f252c7 ("cpufreq: intel_pstate: Use passive mode by default without HWP") was meant to cause intel_pstate to be used in the passive mode with the schedutil governor on top of it, but it missed the case in which either "ondemand" or "conservative" was selected as the default governor in the existing kernel config, in which case the previous old governor configuration would be used, causing the default legacy governor to be used on top of intel_pstate instead of schedutil. Address this by preventing "ondemand" and "conservative" from being configured as the default cpufreq governor in the case when schedutil is the default choice for the default governor setting. [Note that the default cpufreq governor can still be set via the kernel command line if need be and that choice is not limited, so if anyone really wants to use one of the legacy governors by default, it can be achieved this way.] Fixes: 33aa46f252c7 ("cpufreq: intel_pstate: Use passive mode by default without HWP") Reported-by: Julia Lawall <[email protected]> Cc: 5.8+ <[email protected]> # 5.8+ Signed-off-by: Rafael J. Wysocki <[email protected]> Acked-by: Viresh Kumar <[email protected]>
2020-10-27cpufreq: e_powersaver: remove unreachable breakZhang Qilong2-2/+0
A 'break' following a 'return' statement is pointless, so remove it. Signed-off-by: Zhang Qilong <[email protected]> Acked-by: Viresh Kumar <[email protected]> [ rjw: Subject and changelog edits ] Signed-off-by: Rafael J. Wysocki <[email protected]>
2020-10-27Merge tag 'devicetree-fixes-for-5.10-1' of ↵Linus Torvalds118-348/+656
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull devicetree fixes from Rob Herring: - More binding additionalProperties/unevaluatedProperties additions - More yamllint fixes on additions in the merge window - CrOS embedded controller schema updates to fix warnings - LEDs schema update adding ID_RGB - A reserved-memory fix for regions starting at address 0x0 * tag 'devicetree-fixes-for-5.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: Another round of adding missing 'additionalProperties/unevalutatedProperties' dt-bindings: Explicitly allow additional properties in board/SoC schemas dt-bindings: More whitespace clean-ups in schema files mfd: google,cros-ec: add missing properties dt-bindings: input: convert cros-ec-keyb to json-schema dt-bindings: i2c: convert i2c-cros-ec-tunnel to json-schema of: Fix reserved-memory overlap detection dt-bindings: mailbox: mtk-gce: fix incorrect mbox-cells value dt-bindings: leds: Update devicetree documents for ID_RGB
2020-10-27Fix compat regression in process_vm_rw()Jens Axboe1-1/+2
The removal of compat_process_vm_{readv,writev} didn't change process_vm_rw(), which always assumes it's not doing a compat syscall. Instead of passing in 'false' unconditionally for 'compat', make it conditional on in_compat_syscall(). [ Both Al and Christoph point out that trying to access a 64-bit process from a 32-bit one cannot work anyway, and is likely better prohibited, but that's a separate issue - Linus ] Fixes: c3973b401ef2 ("mm: remove compat_process_vm_{readv,writev}") Reported-and-tested-by: Kyle Huey <[email protected]> Signed-off-by: Jens Axboe <[email protected]> Acked-by: Al Viro <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-10-27asm-generic: mark __{get,put}_user_fn as __always_inlineChristoph Hellwig1-2/+4
Without the explicit __always_inline, some RISC-V configs place the functions out of line, triggering the BUILD_BUG_ON checks in the function. Fixes: 11129e8ed4d9 ("riscv: use memcpy based uaccess for nommu again") Reported-by: kernel test robot <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]>
2020-10-27drm/vc4: drv: Add error handding for bindHoegeun Kwon1-0/+1
There is a problem that if vc4_drm bind fails, a memory leak occurs on the drm_property_create side. Add error handding for drm_mode_config. Signed-off-by: Hoegeun Kwon <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2020-10-27btrfs: convert data_seqcount to seqcount_mutex_tDavidlohr Bueso2-7/+6
By doing so we can associate the sequence counter to the chunk_mutex for lockdep purposes (compiled-out otherwise), the mutex is otherwise used on the write side. Also avoid explicitly disabling preemption around the write region as it will now be done automatically by the seqcount machinery based on the lock type. Signed-off-by: Davidlohr Bueso <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2020-10-27btrfs: don't fallback to buffered read if we don't need toJohannes Thumshirn1-1/+2
Since we switched to the iomap infrastructure in b5ff9f1a96e8f ("btrfs: switch to iomap for direct IO") we're calling generic_file_buffered_read() directly and not via generic_file_read_iter() anymore. If the read could read everything there is no need to bother calling generic_file_buffered_read(), like it is handled in generic_file_read_iter(). If we call generic_file_buffered_read() in this case we can hit a situation where we do an invalid readahead and cause this UBSAN splat in fstest generic/091: run fstests generic/091 at 2020-10-21 10:52:32 ================================================================================ UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13 shift exponent 64 is too large for 64-bit type 'long unsigned int' CPU: 0 PID: 656 Comm: fsx Not tainted 5.9.0-rc7+ #821 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4-rebuilt.opensuse.org 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:77 dump_stack+0x57/0x70 lib/dump_stack.c:118 ubsan_epilogue+0x5/0x40 lib/ubsan.c:148 __ubsan_handle_shift_out_of_bounds.cold+0x61/0xe9 lib/ubsan.c:395 __roundup_pow_of_two ./include/linux/log2.h:57 get_init_ra_size mm/readahead.c:318 ondemand_readahead.cold+0x16/0x2c mm/readahead.c:530 generic_file_buffered_read+0x3ac/0x840 mm/filemap.c:2199 call_read_iter ./include/linux/fs.h:1876 new_sync_read+0x102/0x180 fs/read_write.c:415 vfs_read+0x11c/0x1a0 fs/read_write.c:481 ksys_read+0x4f/0xc0 fs/read_write.c:615 do_syscall_64+0x33/0x40 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 arch/x86/entry/entry_64.S:118 RIP: 0033:0x7fe87fee992e RSP: 002b:00007ffe01605278 EFLAGS: 00000246 ORIG_RAX: 0000000000000000 RAX: ffffffffffffffda RBX: 000000000004f000 RCX: 00007fe87fee992e RDX: 0000000000004000 RSI: 0000000001677000 RDI: 0000000000000003 RBP: 000000000004f000 R08: 0000000000004000 R09: 000000000004f000 R10: 0000000000053000 R11: 0000000000000246 R12: 0000000000004000 R13: 0000000000000000 R14: 000000000007a120 R15: 0000000000000000 ================================================================================ BTRFS info (device nullb0): has skinny extents BTRFS info (device nullb0): ZONED mode enabled, zone size 268435456 B BTRFS info (device nullb0): enabling ssd optimizations Fixes: f85781fb505e ("btrfs: switch to iomap for direct IO") Reviewed-by: Goldwyn Rodrigues <[email protected]> Signed-off-by: Johannes Thumshirn <[email protected]> Signed-off-by: David Sterba <[email protected]>
2020-10-27interconnect: qcom: use icc_sync state for sm8[12]50Dmitry Baryshkov2-6/+8
In addition to the rest of Qcom interconnect drivers use icc_sync_state for SM8150/SM8250 interconnect drivers to notify the interconnect framework when all consumers are probed and there is no need to keep the bandwidth set to maximum anymore. Also move the BCM initialization before creating the nodes to set the max bandwidth in hardware for the initialization/probing stage. Signed-off-by: Dmitry Baryshkov <[email protected]> Fixes: 7d3b0b0d8184 ("interconnect: qcom: Use icc_sync_state") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Georgi Djakov <[email protected]>
2020-10-27tracing, synthetic events: Replace buggy strcat() with seq_buf operationsSteven Rostedt (VMware)1-14/+22
There was a memory corruption bug happening while running the synthetic event selftests: kmemleak: Cannot insert 0xffff8c196fa2afe5 into the object search tree (overlaps existing) CPU: 5 PID: 6866 Comm: ftracetest Tainted: G W 5.9.0-rc5-test+ #577 Hardware name: Hewlett-Packard HP Compaq Pro 6300 SFF/339A, BIOS K01 v03.03 07/14/2016 Call Trace: dump_stack+0x8d/0xc0 create_object.cold+0x3b/0x60 slab_post_alloc_hook+0x57/0x510 ? tracing_map_init+0x178/0x340 __kmalloc+0x1b1/0x390 tracing_map_init+0x178/0x340 event_hist_trigger_func+0x523/0xa40 trigger_process_regex+0xc5/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xca/0x210 ksys_write+0x70/0xf0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fef0a63a487 Code: 64 89 02 48 c7 c0 ff ff ff ff eb bb 0f 1f 80 00 00 00 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 RSP: 002b:00007fff76f18398 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000039 RCX: 00007fef0a63a487 RDX: 0000000000000039 RSI: 000055eb3b26d690 RDI: 0000000000000001 RBP: 000055eb3b26d690 R08: 000000000000000a R09: 0000000000000038 R10: 000055eb3b2cdb80 R11: 0000000000000246 R12: 0000000000000039 R13: 00007fef0a70b500 R14: 0000000000000039 R15: 00007fef0a70b700 kmemleak: Kernel memory leak detector disabled kmemleak: Object 0xffff8c196fa2afe0 (size 8): kmemleak: comm "ftracetest", pid 6866, jiffies 4295082531 kmemleak: min_count = 1 kmemleak: count = 0 kmemleak: flags = 0x1 kmemleak: checksum = 0 kmemleak: backtrace: __kmalloc+0x1b1/0x390 tracing_map_init+0x1be/0x340 event_hist_trigger_func+0x523/0xa40 trigger_process_regex+0xc5/0x110 event_trigger_write+0x71/0xd0 vfs_write+0xca/0x210 ksys_write+0x70/0xf0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The cause came down to a use of strcat() that was adding an string that was shorten, but the strcat() did not take that into account. strcat() is extremely dangerous as it does not care how big the buffer is. Replace it with seq_buf operations that prevent the buffer from being overwritten if what is being written is bigger than the buffer. Fixes: 10819e25799a ("tracing: Handle synthetic event array field type checking correctly") Reviewed-by: Tom Zanussi <[email protected]> Tested-by: Tom Zanussi <[email protected]> Signed-off-by: Steven Rostedt (VMware) <[email protected]>
2020-10-27staging: fieldbus: anybuss: jump to correct label in an error pathJing Xiangfeng1-1/+1
In current code, controller_probe() misses to call ida_simple_remove() in an error path. Jump to correct label to fix it. Fixes: 17614978ed34 ("staging: fieldbus: anybus-s: support the Arcx anybus controller") Reviewed-by: Sven Van Asbroeck <[email protected]> Signed-off-by: Jing Xiangfeng <[email protected]> Cc: stable <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-10-27staging: wfx: fix test on return value of gpiod_get_value()Jérôme Pouiller1-1/+1
The commit 8522d62e6bca ("staging: wfx: gpiod_get_value() can return an error") has changed the way the driver test the value returned by gpiod_get_value(). The new code was wrong. Fixes: 8522d62e6bca ("staging: wfx: gpiod_get_value() can return an error") Signed-off-by: Jérôme Pouiller <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2020-10-27staging: wfx: fix use of uninitialized pointerJérôme Pouiller1-3/+3
With -Wuninitialized, the compiler complains: drivers/staging/wfx/data_tx.c:34:19: warning: variable 'band' is uninitialized when used here [-Wuninitialized] if (rate->idx >= band->n_bitrates) { ^~~~ Reported-by: kernel test robot <[email protected]> Reported-by: Nathan Chancellor <[email protected]> Fixes: 868fd970e187 ("staging: wfx: improve robustness of wfx_get_hw_rate()") Signed-off-by: Jérôme Pouiller <[email protected]> Reviewed-by: Nathan Chancellor <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.