aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-06-06usb: gadget: composite: make sure to reactivate function on unbindFelipe Balbi1-6/+5
If a function sets bind_deactivated flag, upon removal we will be left with an unbalanced deactivation. Let's make sure that we conditionally call usb_function_activate() from usb_remove_function() and make sure usb_remove_function() is called from remove_config(). Signed-off-by: Felipe Balbi <[email protected]>
2017-06-06powerpc/perf: Fix Power9 test_adder fieldsMadhavan Srinivasan1-2/+2
Commit 8d911904f3ce4 ('powerpc/perf: Add restrictions to PMC5 in power9 DD1') was added to restrict the use of PMC5 in Power9 DD1. Intention was to disable the use of PMC5 using raw event code. But instead of updating the power9_isa207_pmu structure (used on DD1), the commit incorrectly updated the power9_pmu structure. Fix it. Fixes: 8d911904f3ce ("powerpc/perf: Add restrictions to PMC5 in power9 DD1") Reported-by: Shriya <[email protected]> Signed-off-by: Madhavan Srinivasan <[email protected]> Tested-by: Shriya <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2017-06-06powerpc/numa: Fix percpu allocations to be NUMA awareMichael Ellerman2-2/+16
In commit 8c272261194d ("powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID"), we switched to the generic implementation of cpu_to_node(), which uses a percpu variable to hold the NUMA node for each CPU. Unfortunately we neglected to notice that we use cpu_to_node() in the allocation of our percpu areas, leading to a chicken and egg problem. In practice what happens is when we are setting up the percpu areas, cpu_to_node() reports that all CPUs are on node 0, so we allocate all percpu areas on node 0. This is visible in the dmesg output, as all pcpu allocs being in group 0: pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23 pcpu-alloc: [0] 24 25 26 27 [0] 28 29 30 31 pcpu-alloc: [0] 32 33 34 35 [0] 36 37 38 39 pcpu-alloc: [0] 40 41 42 43 [0] 44 45 46 47 To fix it we need an early_cpu_to_node() which can run prior to percpu being setup. We already have the numa_cpu_lookup_table we can use, so just plumb it in. With the patch dmesg output shows two groups, 0 and 1: pcpu-alloc: [0] 00 01 02 03 [0] 04 05 06 07 pcpu-alloc: [0] 08 09 10 11 [0] 12 13 14 15 pcpu-alloc: [0] 16 17 18 19 [0] 20 21 22 23 pcpu-alloc: [1] 24 25 26 27 [1] 28 29 30 31 pcpu-alloc: [1] 32 33 34 35 [1] 36 37 38 39 pcpu-alloc: [1] 40 41 42 43 [1] 44 45 46 47 We can also check the data_offset in the paca of various CPUs, with the fix we see: CPU 0: data_offset = 0x0ffe8b0000 CPU 24: data_offset = 0x1ffe5b0000 And we can see from dmesg that CPU 24 has an allocation on node 1: node 0: [mem 0x0000000000000000-0x0000000fffffffff] node 1: [mem 0x0000001000000000-0x0000001fffffffff] Cc: [email protected] # v3.16+ Fixes: 8c272261194d ("powerpc/numa: Enable USE_PERCPU_NUMA_NODE_ID") Signed-off-by: Michael Ellerman <[email protected]> Reviewed-by: Nicholas Piggin <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2017-06-06ALSA: hda/realtek - Reorder ALC269 ASUS quirk entriesTakashi Iwai1-5/+5
A disorder is found in some ALC269 quirk entries for ASUS (1043:xxxx), which should have been sorted in PCI SSID order. Rearrange them, so that I won't overlook the already existing entry like I did a couple of times in the past... Signed-off-by: Takashi Iwai <[email protected]>
2017-06-06ALSA: hda/realtek: Fix mic and headset jack sense on Asus X705UDChris Chiu1-0/+1
The ASUS X705UD laptop requires the known fixup ALC256_FIXUP_ASUS_MIC in order to fix headphone jack sensing and to enable use of the internal microphone. Unfortunately jack sensing for the headset mic is still not working. [rearranged the position to keep the PCI SSID order -- tiwai] Signed-off-by: Chris Chiu <[email protected]> Signed-off-by: Daniel Drake <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2017-06-06[media] sir_ir: infinite loop in interrupt handlerSean Young1-0/+6
Since this driver does no detection of hardware, it might be used with a non-sir port. Escape out if we are spinning. Reported-by: kbuild test robot <[email protected]> Signed-off-by: Sean Young <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2017-06-06[media] cec-notifier.h: handle unreachable CONFIG_CEC_COREArnd Bergmann1-0/+10
Fix a link error in this specific combination of config options: CONFIG_MEDIA_CEC_SUPPORT=y CONFIG_CEC_CORE=m CONFIG_MEDIA_CEC_NOTIFIER=y CONFIG_VIDEO_STI_HDMI_CEC=m CONFIG_DRM_STI=y drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_remove': sti_hdmi.c:(.text.sti_hdmi_remove+0x10): undefined reference to `cec_notifier_set_phys_addr' sti_hdmi.c:(.text.sti_hdmi_remove+0x34): undefined reference to `cec_notifier_put' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_connector_get_modes': sti_hdmi.c:(.text.sti_hdmi_connector_get_modes+0x4a): undefined reference to `cec_notifier_set_phys_addr_from_edid' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_probe': sti_hdmi.c:(.text.sti_hdmi_probe+0x204): undefined reference to `cec_notifier_get' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_connector_detect': sti_hdmi.c:(.text.sti_hdmi_connector_detect+0x36): undefined reference to `cec_notifier_set_phys_addr' drivers/gpu/drm/sti/sti_hdmi.o: In function `sti_hdmi_disable': sti_hdmi.c:(.text.sti_hdmi_disable+0xc0): undefined reference to `cec_notifier_set_phys_addr' The version below seems to work, though I don't particularly like the IS_REACHABLE() addition since that can be confusing to users. Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2017-06-06[media] cec: improve MEDIA_CEC_RC dependenciesArnd Bergmann1-0/+1
Changing the IS_REACHABLE() into a plain #ifdef broke the case of CONFIG_MEDIA_RC=m && CONFIG_MEDIA_CEC=y: drivers/media/cec/cec-core.o: In function `cec_unregister_adapter': cec-core.c:(.text.cec_unregister_adapter+0x18): undefined reference to `rc_unregister_device' drivers/media/cec/cec-core.o: In function `cec_delete_adapter': cec-core.c:(.text.cec_delete_adapter+0x54): undefined reference to `rc_free_device' drivers/media/cec/cec-core.o: In function `cec_register_adapter': cec-core.c:(.text.cec_register_adapter+0x94): undefined reference to `rc_register_device' cec-core.c:(.text.cec_register_adapter+0xa4): undefined reference to `rc_free_device' cec-core.c:(.text.cec_register_adapter+0x110): undefined reference to `rc_unregister_device' drivers/media/cec/cec-core.o: In function `cec_allocate_adapter': cec-core.c:(.text.cec_allocate_adapter+0x234): undefined reference to `rc_allocate_device' drivers/media/cec/cec-adap.o: In function `cec_received_msg': cec-adap.c:(.text.cec_received_msg+0x734): undefined reference to `rc_keydown' cec-adap.c:(.text.cec_received_msg+0x768): undefined reference to `rc_keyup' This adds an additional dependency to explicitly forbid this combination. Fixes: 5f2c467c54f5 ("[media] cec: add MEDIA_CEC_RC config option") Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2017-06-06[media] vb2: Fix an off by one error in 'vb2_plane_vaddr'Christophe JAILLET1-1/+1
We should ensure that 'plane_no' is '< vb->num_planes' as done in 'vb2_plane_cookie' just a few lines below. Fixes: e23ccc0ad925 ("[media] v4l: add videobuf2 Video for Linux 2 driver framework") Cc: [email protected] Signed-off-by: Christophe JAILLET <[email protected]> Reviewed-by: Sakari Ailus <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2017-06-06[media] rainshadow-cec: Fix missing spin_lock_init()Wei Yongjun1-0/+1
The driver allocates the spinlock but not initialize it. Use spin_lock_init() on it to initialize it correctly. This is detected by Coccinelle semantic patch. Fixes: 0f314f6c2e77 ("[media] rainshadow-cec: new RainShadow Tech HDMI CEC driver") Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2017-06-06[media] tc358743: fix register i2c_rd/wr function fixPhilipp Zabel1-1/+1
The below mentioned fix contains a small but severe bug, fix it to make the driver work again. Fixes: 3538aa6ecfb2 ("[media] tc358743: fix register i2c_rd/wr functions") Cc: Hans Verkuil <[email protected]> Cc: Mauro Carvalho Chehab <[email protected]> Signed-off-by: Philipp Zabel <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2017-06-06i40e/i40evf: proper update of the page_offset fieldBjörn Töpel2-2/+4
In f8b45b74cc62 ("i40e/i40evf: Use build_skb to build frames") i40e_build_skb updates the page_offset field with an incorrect offset, which can lead to data corruption. This patch updates page_offset correctly, by properly setting truesize. Note that the bug only appears on architectures where PAGE_SIZE is 8192 or larger. Fixes: f8b45b74cc62 ("i40e/i40evf: Use build_skb to build frames") Signed-off-by: Björn Töpel <[email protected]> Acked-by: Alexander Duyck <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-06-06i40e: Fix state flags for bit set and clean operations of PFMauro S. M. Rodrigues1-18/+18
Commit 0da36b9774cc ("i40e: use DECLARE_BITMAP for state fields") introduced changes in the way i40e works with state flags converting them to bitmaps using kernel bitmap API. This change introduced a regression due to a mistaken substitution using __I40E_VSI_DOWN instead of __I40E_DOWN when testing state of a PF at i40e_reset_subtask() function. This caused a flood in the kernel log with the follow message: [49.013] i40e 0002:01:00.0: bad reset request 0x00000020 Commit d19cb64b9222 ("i40e: separate PF and VSI state flags") also introduced some misuse of the VSI and PF flags, so both could be considered as the offenders. This patch simply fixes the flags where it makes sense by changing __I40E_VSI_DOWN to __I40E_DOWN. Fixes: 0da36b9774cc ("i40e: use DECLARE_BITMAP for state fields") Fixes: d19cb64b9222 ("i40e: separate PF and VSI state flags") Reviewed-by: "Guilherme G. Piccoli" <[email protected]> Signed-off-by: "Mauro S. M. Rodrigues" <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2017-06-06cxl: Avoid double free_irq() for psl,slice interruptsVaibhav Jain1-3/+11
During an eeh call to cxl_remove can result in double free_irq of psl,slice interrupts. This can happen if perst_reloads_same_image == 1 and call to cxl_configure_adapter() fails during slot_reset callback. In such a case we see a kernel oops with following back-trace: Oops: Kernel access of bad area, sig: 11 [#1] Call Trace: free_irq+0x88/0xd0 (unreliable) cxl_unmap_irq+0x20/0x40 [cxl] cxl_native_release_psl_irq+0x78/0xd8 [cxl] pci_deconfigure_afu+0xac/0x110 [cxl] cxl_remove+0x104/0x210 [cxl] pci_device_remove+0x6c/0x110 device_release_driver_internal+0x204/0x2e0 pci_stop_bus_device+0xa0/0xd0 pci_stop_and_remove_bus_device+0x28/0x40 pci_hp_remove_devices+0xb0/0x150 pci_hp_remove_devices+0x68/0x150 eeh_handle_normal_event+0x140/0x580 eeh_handle_event+0x174/0x360 eeh_event_handler+0x1e8/0x1f0 This patch fixes the issue of double free_irq by checking that variables that hold the virqs (err_hwirq, serr_hwirq, psl_virq) are not '0' before un-mapping and resetting these variables to '0' when they are un-mapped. Cc: [email protected] Signed-off-by: Vaibhav Jain <[email protected]> Reviewed-by: Andrew Donnellan <[email protected]> Acked-by: Frederic Barrat <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2017-06-06powerpc/kernel: Initialize load_tm on task creationBreno Leitao1-0/+1
Currently tsk->thread.load_tm is not initialized in the task creation and can contain garbage on a new task. This is an undesired behaviour, since it affects the timing to enable and disable the transactional memory laziness (disabling and enabling the MSR TM bit, which affects TM reclaim and recheckpoint in the scheduling process). Fixes: 5d176f751ee3 ("powerpc: tm: Enable transactional memory (TM) lazily for userspace") Cc: [email protected] # v4.9+ Signed-off-by: Breno Leitao <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2017-06-06gpu: ipu-v3: Fix CSI selection for VDICMarek Vasut1-7/+8
The description of the CSI_SEL bit in the i.MX6 reference manual is incorrect. It states "This bit defines which CSI is the input to the IC. This bit is effective only if IC_INPUT is bit cleared". From experiment it was found this is in fact not correct. The CSI_SEL bit selects which CSI is input to _both_ the VDIC _and_ the IC. If the IC_INPUT bit is set so that the IC is receiving from the VDIC, the IC ignores the CSI_SEL bit, but CSI_SEL still selects which CSI the VDIC receives from in that case. Signed-off-by: Marek Vasut <[email protected]> Signed-off-by: Steve Longerbeam <[email protected]> Signed-off-by: Philipp Zabel <[email protected]>
2017-06-06drm/imx: imx-ldb: Accept drm_of_find_panel_or_bridge failureLeonard Crestez1-1/+1
Not having an endpoint bound in DT should not cause a failure here, there are fallbacks. So explicitly accept a missing endpoint. This behavior change was introduced by refactoring in drm_of parsing code and it should not require dts changes. In particular this fixes imx6qdl-sabreauto boards. Link: https://lists.freedesktop.org/archives/dri-devel/2017-May/141233.html Fixes: ebc944613567 ("drm: convert drivers to use drm_of_find_panel_or_bridge") Signed-off-by: Leonard Crestez <[email protected]> Signed-off-by: Philipp Zabel <[email protected]>
2017-06-06gpu: ipu-v3: pre: only use internal clock gatingLucas Stach1-8/+5
By setting the SFTRST bit, the PRE will be held in the lowest power state with clocks to the internal blocks gated. When external clock gating is used (from the external clock controller, or by setting the CLKGATE bit) the PRE will sporadically fail to start. Signed-off-by: Lucas Stach <[email protected]> Fixes: d2a34232580a ("gpu: ipu-v3: add driver for Prefetch Resolve Engine") Signed-off-by: Philipp Zabel <[email protected]>
2017-06-06KVM: arm/arm64: vgic-v3: Fix nr_pre_bits bitfield extractionChristoffer Dall1-1/+1
We used to extract PRIbits from the ICH_VT_EL2 which was the upper field in the register word, so a mask wasn't necessary, but as we switched to looking at PREbits, which is bits 26 through 28 with the PRIbits field being potentially non-zero, we really need to mask off the field value, otherwise fun things may happen. Signed-off-by: Christoffer Dall <[email protected]> Acked-by: Marc Zyngier <[email protected]>
2017-06-06Merge tag 'drm-misc-fixes-2017-06-02' of ↵Dave Airlie7-20/+32
git://anongit.freedesktop.org/git/drm-misc into drm-fixes Core Changes: - Grab locks in drm_atomic_helper_resume() (Daniel) - Fix oops when unplugging USB device (expand cleanup in drm_unplug_dev) (Hans) Driver Changes: - rockchip: Don't output 10-bit format to 8-bit encoders (Mark) Cc: Mark yao <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Hans de Goede <[email protected]> * tag 'drm-misc-fixes-2017-06-02' of git://anongit.freedesktop.org/git/drm-misc: drm: Fix oops + Xserver hang when unplugging USB drm devices drm: Fix locking in drm_atomic_helper_resume drm/rockchip: Correct vop out_mode configure
2017-06-06Merge branch 'linux-4.12' of git://github.com/skeggsb/linux into drm-fixesDave Airlie6-38/+27
4 nouveau regression fixes. * 'linux-4.12' of git://github.com/skeggsb/linux: drm/nouveau/tmr: fully separate alarm execution/pending lists drm/nouveau: enable autosuspend only when it'll actually be used drm/nouveau: replace multiple open-coded runpm support checks with function drm/nouveau/kms/nv50: add null check before pointer dereference
2017-06-06drm/nouveau/tmr: fully separate alarm execution/pending listsBen Skeggs2-3/+5
Reusing the list_head for both is a bad idea. Callback execution is done with the lock dropped so that alarms can be rescheduled from the callback, which means that with some unfortunate timing, lists can get corrupted. The execution list should not require its own locking, the single function that uses it can only be called from a single context. Signed-off-by: Ben Skeggs <[email protected]> Cc: [email protected]
2017-06-06drm/nouveau: enable autosuspend only when it'll actually be usedBen Skeggs1-2/+2
This prevents a deadlock that somehow results from the suspend() -> forbid() -> resume() callchain. [ 125.266960] [drm] Initialized nouveau 1.3.1 20120801 for 0000:02:00.0 on minor 1 [ 370.120872] INFO: task kworker/4:1:77 blocked for more than 120 seconds. [ 370.120920] Tainted: G O 4.12.0-rc3 #20 [ 370.120947] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [ 370.120982] kworker/4:1 D13808 77 2 0x00000000 [ 370.120998] Workqueue: pm pm_runtime_work [ 370.121004] Call Trace: [ 370.121018] __schedule+0x2bf/0xb40 [ 370.121025] ? mark_held_locks+0x5f/0x90 [ 370.121038] schedule+0x3d/0x90 [ 370.121044] rpm_resume+0x107/0x870 [ 370.121052] ? finish_wait+0x90/0x90 [ 370.121065] ? pci_pm_runtime_resume+0xa0/0xa0 [ 370.121070] pm_runtime_forbid+0x4c/0x60 [ 370.121129] nouveau_pmops_runtime_suspend+0xaf/0xc0 [nouveau] [ 370.121139] pci_pm_runtime_suspend+0x5f/0x170 [ 370.121147] ? pci_pm_runtime_resume+0xa0/0xa0 [ 370.121152] __rpm_callback+0xb9/0x1e0 [ 370.121159] ? pci_pm_runtime_resume+0xa0/0xa0 [ 370.121166] rpm_callback+0x24/0x80 [ 370.121171] ? pci_pm_runtime_resume+0xa0/0xa0 [ 370.121176] rpm_suspend+0x138/0x6e0 [ 370.121192] pm_runtime_work+0x7b/0xc0 [ 370.121199] process_one_work+0x253/0x6a0 [ 370.121216] worker_thread+0x4d/0x3b0 [ 370.121229] kthread+0x133/0x150 [ 370.121234] ? process_one_work+0x6a0/0x6a0 [ 370.121238] ? kthread_create_on_node+0x70/0x70 [ 370.121246] ret_from_fork+0x2a/0x40 [ 370.121283] Showing all locks held in the system: [ 370.121291] 2 locks held by kworker/4:1/77: [ 370.121298] #0: ("pm"){.+.+.+}, at: [<ffffffffac0d3530>] process_one_work+0x1d0/0x6a0 [ 370.121315] #1: ((&dev->power.work)){+.+.+.}, at: [<ffffffffac0d3530>] process_one_work+0x1d0/0x6a0 [ 370.121330] 1 lock held by khungtaskd/81: [ 370.121333] #0: (tasklist_lock){.+.+..}, at: [<ffffffffac10fc8d>] debug_show_all_locks+0x3d/0x1a0 [ 370.121355] 1 lock held by dmesg/1639: [ 370.121358] #0: (&user->lock){+.+.+.}, at: [<ffffffffac124b6d>] devkmsg_read+0x4d/0x360 [ 370.121377] ============================================= Signed-off-by: Ben Skeggs <[email protected]>
2017-06-06drm/nouveau: replace multiple open-coded runpm support checks with functionBen Skeggs3-32/+18
Signed-off-by: Ben Skeggs <[email protected]>
2017-06-06drm/nouveau/kms/nv50: add null check before pointer dereferenceGustavo A. R. Silva1-1/+2
Add null check before dereferencing pointer asyc Addresses-Coverity-ID: 1397932 Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2017-06-05xtensa: don't use linux IRQ #0Max Filippov6-15/+13
Linux IRQ #0 is reserved for error reporting and may not be used. Increase NR_IRQS for one additional slot and increase irq_domain_add_legacy parameter first_irq value to 1, so that linux IRQ #0 is not associated with hardware IRQ #0 in legacy IRQ domains. Introduce macro XTENSA_PIC_LINUX_IRQ for static translation of xtensa PIC hardware IRQ # to linux IRQ #. Use this macro in XTFPGA platform data definitions. This fixes inability to use hardware IRQ #0 in configurations that don't use device tree and allows for non-identity mapping between linux IRQ # and hardware IRQ #. Cc: [email protected] Signed-off-by: Max Filippov <[email protected]>
2017-06-05md: initialise ->writes_pending in personality modules.NeilBrown5-4/+21
The new per-cpu counter for writes_pending is initialised in md_alloc(), which is not called by dm-raid. So dm-raid fails when md_write_start() is called. Move the initialization to the personality modules that need it. This way it is always initialised when needed, but isn't unnecessarily initialized (requiring memory allocation) when the personality doesn't use writes_pending. Reported-by: Heinz Mauelshagen <[email protected]> Fixes: 4ad23a976413 ("MD: use per-cpu counter for writes_pending") Signed-off-by: NeilBrown <[email protected]> Signed-off-by: Shaohua Li <[email protected]>
2017-06-05Merge branch 'for-4.12-fixes' of ↵Linus Torvalds4-2/+28
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "Two cgroup fixes. One to address RCU delay of cpuset removal affecting userland visible behaviors. The other fixes a race condition between controller disable and cgroup removal" * 'for-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cpuset: consider dying css as offline cgroup: Prevent kill_css() from being called more than once
2017-06-05Merge branch 'for-4.12-fixes' of ↵Linus Torvalds5-11/+62
git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata Pull libata fixes from Tejun Heo: - Revert of sata_mv devm_ioremap_resource() conversion. It made init fail if there are overlapping resources which led to detection failures on some setups. - A workaround for an Acer laptop which sometimes reports corrupt port map. - Other non-critical fixes. * 'for-4.12-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: libata: fix error checking in in ata_parse_force_one() Revert "ata: sata_mv: Convert to devm_ioremap_resource()" ata: libahci: properly propagate return value of platform_get_irq() ata: sata_rcar: Handle return value of clk_prepare_enable ahci: Acer SA5-271 SSD Not Detected Fix
2017-06-05Revert "ACPICA: Disassembler: Enhance resource descriptor detection"Rafael J. Wysocki1-9/+0
Revert commit da28e1955d7f (ACPICA: Disassembler: Enhance resource descriptor detection) as it is based on an assumption that doesn't hold all the time and causes problems to happen because of that. Reported-by: Linda Knippers <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2017-06-05Merge tag 'iwlwifi-for-kalle-2017-06-05' of ↵Kalle Valo17-78/+115
git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes Fixes for 4.12: * Some memory leaks; * IBSS support; * Some bugzilla bugs; * Some runtime PM fixes; * Rate-scaling issues; * Some locking problems;
2017-06-05xtensa: reduce double exception literal reservationMax Filippov1-3/+3
Double exception vector only needs 20 bytes of space for 5 literals, not 48. Reduce the reservation for double exception vector literals accordingly. This fixes build for configurations with small user exception vector size. Signed-off-by: Max Filippov <[email protected]>
2017-06-05iwlwifi: fix host command memory leaksShahar S Matityahu1-3/+6
Sending host command with CMD_WANT_SKB flag demands the release of the response buffer with iwl_free_resp function. The patch adds the memory release in all the relevant places Signed-off-by: Shahar S Matityahu <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: fix min API version for 7265D, 3168, 8000 and 8265Luca Coelho2-4/+4
In a previous commit, we removed support for API versions earlier than 22 for these NICs. By mistake, the *_UCODE_API_MIN definitions were set to 17. Fix that. Fixes: 4b87e5af638b ("iwlwifi: remove support for fw older than -17 and -22") Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: clear new beacon command template structJohannes Berg1-1/+1
Clear the struct so that all reserved fields are zero when we send the struct down to the device. Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: don't fail when removing a key from an inexisting staLuca Coelho1-8/+5
The iwl_mvm_remove_sta_key() function handles removing a key when the sta doesn't exist anymore. Mistakenly, this was changed to return an error while fixing another bug. If the mvm_sta doesn't exist, we continue normally, but just don't try to remove the igtk key. Fixes: cd4d23c1ea9b ("iwlwifi: mvm: Fix removal of IGTK") Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: pcie: only use d0i3 in suspend/resume if system_pm is set to d0i3Luca Coelho1-2/+4
We only need to handle d0i3 entry and exit during suspend resume if system_pm is set to IWL_PLAT_PM_MODE_D0I3, otherwise d0i3 entry failures will cause suspend to fail. This fixes https://bugzilla.kernel.org/show_bug.cgi?id=194791 Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: fix firmware debug restart recordingEmmanuel Grumbach4-19/+27
When we want to stop the recording of the firmware debug and restart it later without reloading the firmware we don't need to resend the configuration that comes with host commands. Sending those commands confused the hardware and led to an NMI 0x66. Change the flow as following: * read the relevant registers (DBGC_IN_SAMPLE, DBGC_OUT_CTRL) * clear those registers * wait for the hardware to complete its write to the buffer * get the data * restore the value of those registers (to restart the recording) For early start (where the configuration is already compiled in the firmware), we don't need to set those registers after the firmware has been loaded, but only when we want to restart the recording without having restarted the firmware. Signed-off-by: Emmanuel Grumbach <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: tt: move ucode_loaded check under mutexJohannes Berg1-3/+5
The ucode_loaded check should be under the mutex, since it can otherwise change state after we looked at it and before we got the mutex. Fix that. Fixes: 5c89e7bc557e ("iwlwifi: mvm: add registration to cooling device") Signed-off-by: Johannes Berg <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: support ibss in dqa modeLiad Kaufman1-1/+12
Allow working IBSS also when working in DQA mode. This is done by setting it to treat the queues the same as a BSS AP treats the queues. Fixes: 7948b87308a4 ("iwlwifi: mvm: enable dynamic queue allocation mode") Signed-off-by: Liad Kaufman <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: Fix command queue number on d0i3 flowHaim Dreyfuss1-1/+4
During d0i3 flow we flush all the queue except from the command queue. Currently, in this flow the command queue is hard coded to 9. In DQA the command queue number has changed from 9 to 0. Fix that. This fixes a problem in runtime PM resume flow. Fixes: 097129c9e625 ("iwlwifi: mvm: move cmd queue to be #0 in dqa mode") Signed-off-by: Haim Dreyfuss <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05iwlwifi: mvm: rs: start using LQ command colorGregory Greenman6-36/+47
Up until now, the driver was comparing the rate reported by the FW and the rate of the latest LQ command to avoid processing data belonging to the old LQ command. Recently, FW changed the meaning of the initial rate field in tx response and it holds the actual rate (which is not necessarily the initial rate of LQ's rate table). Use instead LQ cmd color to be able to filter out tx responses/BA notifications which where sent during earlier LQ commands' time frame. This fixes some throughput degradation in noisy environments. Signed-off-by: Gregory Greenman <[email protected]> Signed-off-by: Luca Coelho <[email protected]>
2017-06-05sparc64: Add __multi3 for gcc 7.x and later.David S. Miller2-0/+36
Reported-by: Waldemar Brodkorb <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-05Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds4-13/+15
Pull ARM fixes from Russell King: "Three fixes this time around: - Two fixes for noMMU, fixing the decompressor header layout, and preventing a build error with some configurations. - Fixing the hyp-stub updates that went in during the merge window for platforms that use MCPM" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8677/1: boot/compressed: fix decompressor header layout for v7-M ARM: 8676/1: NOMMU: provide pgprot_device() macro ARM: 8675/1: MCPM: ensure not to enter __hyp_soft_restart from loopback and cpu_power_down
2017-06-05perf report: Ensure the perf DSO mapping matches what libdw seesMilian Wolff1-0/+8
In some situations the libdw unwinder stopped working properly. I.e. with libunwind we see: ~~~~~ heaptrack_gui 2228 135073.400112: 641314 cycles: e8ed _dl_fixup (/usr/lib/ld-2.25.so) 15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so) ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) 608f3 _GLOBAL__sub_I_kdynamicjobtracker.cpp (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) f199 call_init.part.0 (/usr/lib/ld-2.25.so) f2a5 _dl_init (/usr/lib/ld-2.25.so) db9 _dl_start_user (/usr/lib/ld-2.25.so) ~~~~~ But with libdw and without this patch this sample is not properly unwound: ~~~~~ heaptrack_gui 2228 135073.400112: 641314 cycles: e8ed _dl_fixup (/usr/lib/ld-2.25.so) 15f06 _dl_runtime_resolve_sse_vex (/usr/lib/ld-2.25.so) ed94c KDynamicJobTracker::KDynamicJobTracker (/home/milian/projects/compiled/kf5/lib64/libKF5KIOWidgets.so.5.35.0) ~~~~~ Debug output showed me that libdw found a module for the last frame address, but it thinks it belongs to /usr/lib/ld-2.25.so. This patch double-checks what libdw sees and what perf knows. If the mappings mismatch, we now report the elf known to perf. This fixes the situation above, and the libdw unwinder produces the same stack as libunwind. Signed-off-by: Milian Wolff <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-05perf report: Include partial stacks unwound with libdwMilian Wolff1-1/+1
So far the whole stack was thrown away when any error occurred before the maximum stack depth was unwound. This is actually a very common scenario though. The stacks that got unwound so far are still interesting. This removes a large chunk of differences when comparing perf script output for libunwind and libdw perf unwinding. E.g. with libunwind: ~~~~~ heaptrack_gui 2228 135073.388524: 479408 cycles: ffffffff811749ed perf_iterate_ctx ([kernel.kallsyms]) ffffffff81181662 perf_event_mmap ([kernel.kallsyms]) ffffffff811cf5ed mmap_region ([kernel.kallsyms]) ffffffff811cfe6b do_mmap ([kernel.kallsyms]) ffffffff811b0dca vm_mmap_pgoff ([kernel.kallsyms]) ffffffff811cdb0c sys_mmap_pgoff ([kernel.kallsyms]) ffffffff81033acb sys_mmap ([kernel.kallsyms]) ffffffff81631d37 entry_SYSCALL_64_fastpath ([kernel.kallsyms]) 192ca mmap64 (/usr/lib/ld-2.25.so) 59a9 _dl_map_object_from_fd (/usr/lib/ld-2.25.so) 83d0 _dl_map_object (/usr/lib/ld-2.25.so) cda1 openaux (/usr/lib/ld-2.25.so) 1834f _dl_catch_error (/usr/lib/ld-2.25.so) cfe2 _dl_map_object_deps (/usr/lib/ld-2.25.so) 3481 dl_main (/usr/lib/ld-2.25.so) 17387 _dl_sysdep_start (/usr/lib/ld-2.25.so) 4d37 _dl_start (/usr/lib/ld-2.25.so) d87 _start (/usr/lib/ld-2.25.so) heaptrack_gui 2228 135073.388677: 611329 cycles: 1a3e0 strcmp (/usr/lib/ld-2.25.so) 82b2 _dl_map_object (/usr/lib/ld-2.25.so) cda1 openaux (/usr/lib/ld-2.25.so) 1834f _dl_catch_error (/usr/lib/ld-2.25.so) cfe2 _dl_map_object_deps (/usr/lib/ld-2.25.so) 3481 dl_main (/usr/lib/ld-2.25.so) 17387 _dl_sysdep_start (/usr/lib/ld-2.25.so) 4d37 _dl_start (/usr/lib/ld-2.25.so) d87 _start (/usr/lib/ld-2.25.so) ~~~~~ With libdw without this patch: ~~~~~ heaptrack_gui 2228 135073.388524: 479408 cycles: ffffffff811749ed perf_iterate_ctx ([kernel.kallsyms]) ffffffff81181662 perf_event_mmap ([kernel.kallsyms]) ffffffff811cf5ed mmap_region ([kernel.kallsyms]) ffffffff811cfe6b do_mmap ([kernel.kallsyms]) ffffffff811b0dca vm_mmap_pgoff ([kernel.kallsyms]) ffffffff811cdb0c sys_mmap_pgoff ([kernel.kallsyms]) ffffffff81033acb sys_mmap ([kernel.kallsyms]) ffffffff81631d37 entry_SYSCALL_64_fastpath ([kernel.kallsyms]) heaptrack_gui 2228 135073.388677: 611329 cycles: ~~~~~ With this patch applied, the libdw unwinder will produce the same output as the libunwind unwinder. Signed-off-by: Milian Wolff <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-05perf annotate: Add missing powerpc tripletKim Phillips1-0/+1
On an Ubuntu xenial system, 'perf annotate' says to install powerpc objdump on a system that already has binutils-powerpc-linux-gnu installed. Make perf aware of the missing triplet for the powerpc-linux-gnu target. Signed-off-by: Kim Phillips <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: He Kuang <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-05perf test: Disable breakpoint signal tests for powerpcJiri Olsa3-0/+24
The following tests are failing on powerpc: # perf test break 18: Breakpoint overflow signal handler : FAILED! 19: Breakpoint overflow sampling : FAILED! The powerpc kenel so far does not have support to even create instruction breakpoints using the perf event interface, so those tests fail early in the config phase. I added a '->is_supported()' callback to test struct to be able to disable specific tests. It seems better than putting ifdefs directly to the test array. Signed-off-by: Jiri Olsa <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/20170601205450.GA398@krava Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-05perf symbols: Use correct filename for compressed modules in build-id cacheNamhyung Kim1-4/+1
The decompress_kmodule() decompresses kernel modules in order to load symbols from it. In the DSO_BINARY_TYPE__BUILD_ID_CACHE case, it needs the full file path to extract the file extension to determine the decompression method. But overwriting 'name' will fail the decompression since it might point to a non-existing old file. Instead, use dso->long_name for having the correct extension and use the real filename to decompress. In the DSO_BINARY_TYPE__SYSTEM_PATH_KMODULE_COMP case, both names should be the same. This allows resolving symbols in the old modules. Before: $ perf report -i perf.data.old | grep scsi_mod 0.00% cc1 [scsi_mod] [k] 0x0000000000004aa6 0.00% as [scsi_mod] [k] 0x00000000000099e1 0.00% cc1 [scsi_mod] [k] 0x0000000000009830 0.00% cc1 [scsi_mod] [k] 0x0000000000001b8f After: 0.00% cc1 [scsi_mod] [k] scsi_handle_queue_ramp_up 0.00% as [scsi_mod] [k] scsi_sg_alloc 0.00% cc1 [scsi_mod] [k] scsi_setup_cmnd 0.00% cc1 [scsi_mod] [k] scsi_get_command Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-05perf symbols: Set module info when build-id event foundNamhyung Kim4-11/+20
Like machine__findnew_module_dso(), it should set necessary info for kernel modules to find symbol info from the file. Factor out dso__set_module_info() to do it. This is needed for dso__needs_decompress() to detect such DSOs. Signed-off-by: Namhyung Kim <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Andi Kleen <[email protected]> Cc: David Ahern <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.