aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2017-06-15Merge branches 'pm-cpufreq', 'pm-cpuidle' and 'pm-devfreq'Rafael J. Wysocki12368-283946/+1317754
* pm-cpufreq: cpufreq: conservative: Allow down_threshold to take values from 1 to 10 Revert "cpufreq: schedutil: Reduce frequencies slower" * pm-cpuidle: cpuidle: dt: Add missing 'of_node_put()' * pm-devfreq: PM / devfreq: exynos-ppmu: Staticize event list PM / devfreq: exynos-ppmu: Handle return value of clk_prepare_enable PM / devfreq: exynos-nocp: Handle return value of clk_prepare_enable
2017-06-14Merge tag 'sunxi-clk-fixes-for-4.12' of ↵Stephen Boyd8-7/+17
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-fixes Allwinner clock fixes for 4.12 Some fixes that fix some bindings that went in 4.12, fix a few reset and clock offsets and a build error fix * tag 'sunxi-clk-fixes-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: clk: sunxi-ng: a64: Export PLL_PERIPH0 clock for the PRCM clk: sunxi-ng: h3: Export PLL_PERIPH0 clock for the PRCM dt-bindings: clock: sunxi-ccu: Add pll-periph to PRCM's needed clocks clk: sunxi-ng: enable SUNXI_CCU_MP for PRCM clk: sunxi-ng: v3s: Fix usb otg device reset bit clk: sunxi-ng: a31: Correct lcd1-ch1 clock register offset
2017-06-14ufs: fix s_size/s_dsize usersAl Viro4-24/+19
For UFS2 we need 64bit variants; we even store them in uspi, but use 32bit ones instead. One wrinkle is in handling of reserved space - recalculating it every time had been stupid all along, but now it would become really ugly. Just calculate it once... Signed-off-by: Al Viro <[email protected]>
2017-06-14ufs: fix reserved blocks checkAl Viro1-4/+6
a) honour ->s_minfree; don't just go with default (5) b) don't bother with capability checks until we know we'll need them Signed-off-by: Al Viro <[email protected]>
2017-06-14ufs: make ufs_freespace() return signedAl Viro1-2/+2
as it is, checking that its return value is <= 0 is useless and that's how it's being used. Signed-off-by: Al Viro <[email protected]>
2017-06-14net: don't global ICMP rate limit packets originating from loopbackJesper Dangaard Brouer2-3/+7
Florian Weimer seems to have a glibc test-case which requires that loopback interfaces does not get ICMP ratelimited. This was broken by commit c0303efeab73 ("net: reduce cycles spend on ICMP replies that gets rate limited"). An ICMP response will usually be routed back-out the same incoming interface. Thus, take advantage of this and skip global ICMP ratelimit when the incoming device is loopback. In the unlikely event that the outgoing it not loopback, due to strange routing policy rules, ICMP rate limiting still works via peer ratelimiting via icmpv4_xrlim_allow(). Thus, we should still comply with RFC1812 (section 4.3.2.8 "Rate Limiting"). This seems to fix the reproducer given by Florian. While still avoiding to perform expensive and unneeded outgoing route lookup for rate limited packets (in the non-loopback case). Fixes: c0303efeab73 ("net: reduce cycles spend on ICMP replies that gets rate limited") Reported-by: Florian Weimer <[email protected]> Reported-by: "H.J. Lu" <[email protected]> Signed-off-by: Jesper Dangaard Brouer <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-14block: Fix a blk_exit_rl() regressionBart Van Assche2-12/+24
Avoid that the following complaint is reported: BUG: sleeping function called from invalid context at kernel/workqueue.c:2790 in_atomic(): 1, irqs_disabled(): 0, pid: 41, name: rcuop/3 1 lock held by rcuop/3/41: #0: (rcu_callback){......}, at: [<ffffffff8111f9a2>] rcu_nocb_kthread+0x282/0x500 Call Trace: dump_stack+0x86/0xcf ___might_sleep+0x174/0x260 __might_sleep+0x4a/0x80 flush_work+0x7e/0x2e0 __cancel_work_timer+0x143/0x1c0 cancel_work_sync+0x10/0x20 blk_throtl_exit+0x25/0x60 blkcg_exit_queue+0x35/0x40 blk_release_queue+0x42/0x130 kobject_put+0xa9/0x190 This happens since we invoke callbacks that need to block from the queue release handler. Fix this by pushing the final release to a workqueue. Reported-by: Ross Zwisler <[email protected]> Fixes: commit b425e5049258 ("block: Avoid that blk_exit_rl() triggers a use-after-free") Signed-off-by: Bart Van Assche <[email protected]> Tested-by: Ross Zwisler <[email protected]> Updated changelog Signed-off-by: Jens Axboe <[email protected]>
2017-06-14rdma/cxgb4: Fix memory leaks during module exitRaju Rangoju1-3/+7
Fix memory leaks of iw_cxgb4 module in the exit path Signed-off-by: Raju Rangoju <[email protected]> Reviewed-by: Steve Wise <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2017-06-14net/act_pedit: fix an error codeDan Carpenter1-1/+3
I'm reviewing static checker warnings where we do ERR_PTR(0), which is the same as NULL. I'm pretty sure we intended to return ERR_PTR(-EINVAL) here. Sometimes these bugs lead to a NULL dereference but I don't immediately see that problem here. Fixes: 71d0ed7079df ("net/act_pedit: Support using offset relative to the conventional network headers") Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Amir Vadai <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-14ufs: fix logics in "ufs: make fsck -f happy"Al Viro1-13/+28
Storing stats _only_ at new locations is wrong for UFS1; old locations should always be kept updated. The check for "has been converted to use of new locations" is also wrong - it should be "->fs_maxbsize is equal to ->fs_bsize". Signed-off-by: Al Viro <[email protected]>
2017-06-14IB/ipoib: Fix memory leak in create child syscallFeras Daoud1-3/+3
The flow of creating a new child goes through ipoib_vlan_add which allocates a new interface and checks the rtnl_lock. If the lock is taken, restart_syscall will be called to restart the system call again. In this case we are not releasing the already allocated interface, causing a leak. Fixes: 9baa0b036410 ("IB/ipoib: Add rtnl_link_ops support") Signed-off-by: Feras Daoud <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2017-06-14IB/ipoib: Fix access to un-initialized napi structAlex Vesker1-1/+0
There is no need to re-enable napi since we set the initialized flag before calling ipoib_ib_dev_stop which will disable napi, disabling napi twice is harmless in case it was already disabled. One more reason for this fix is that when using IPoIB new device driver napi is not added to priv, this can lead to kernel panic when rn_ops ndo_open fails. [ 289.755840] invalid opcode: 0000 [#1] SMP [ 289.757111] task: ffff880036964440 ti: ffff880178ee8000 task.ti: ffff880178ee8000 [ 289.757111] RIP: 0010:[<ffffffffa05368d6>] [<ffffffffa05368d6>] napi_enable.part.24+0x4/0x6 [ib_ipoib] [ 289.757111] RSP: 0018:ffff880178eeb6d8 EFLAGS: 00010246 [ 289.757111] RAX: 0000000000000000 RBX: ffff880177a80010 RCX: 000000007fffffff [ 289.757111] RDX: ffffffff81d5f118 RSI: 0000000000000000 RDI: ffff880177a80010 [ 289.757111] RBP: ffff880178eeb6d8 R08: 0000000000000082 R09: 0000000000000283 [ 289.757111] R10: 0000000000000000 R11: 0000000000000000 R12: ffff880175a00000 [ 289.757111] R13: ffff880177a80080 R14: 0000000000000000 R15: 0000000000000001 [ 289.757111] FS: 00007fe2ee346880(0000) GS:ffff88017fc00000(0000) knlGS:0000000000000000 [ 289.757111] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 289.757111] CR2: 00007fffca979020 CR3: 00000001792e4000 CR4: 00000000000006f0 [ 289.757111] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 289.757111] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 [ 289.757111] Stack: [ 289.796027] ffff880178eeb6f0 ffffffffa05251f5 ffff880177a80000 ffff880178eeb718 [ 289.796027] ffffffffa0528505 ffff880175a00000 ffff880177a80000 0000000000000000 [ 289.796027] ffff880178eeb748 ffffffffa051f0ab ffff880175a00000 ffffffffa0537d60 [ 289.796027] Call Trace: [ 289.796027] [<ffffffffa05251f5>] napi_enable+0x25/0x30 [ib_ipoib] [ 289.796027] [<ffffffffa0528505>] ipoib_ib_dev_open+0x175/0x190 [ib_ipoib] [ 289.796027] [<ffffffffa051f0ab>] ipoib_open+0x4b/0x160 [ib_ipoib] [ 289.796027] [<ffffffff814fe33f>] _dev_open+0xbf/0x130 [ 289.796027] [<ffffffff814fe62d>] __dev_change_flags+0x9d/0x170 [ 289.796027] [<ffffffff814fe729>] dev_change_flags+0x29/0x60 [ 289.796027] [<ffffffff8150caf7>] do_setlink+0x397/0xa40 Fixes: cd565b4b51e5 ('IB/IPoIB: Support acceleration options callbacks') Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2017-06-14IB/ipoib: Delete napi in device uninit defaultAlex Vesker1-0/+3
This patch mekas init_default and uninit_default symmetric with a call to delete napi. Additionally, the uninit_default gained delete napi call in case of init_default fails. Fixes: 515ed4f3aab4 ('IB/IPoIB: Separate control and data related initializations') Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2017-06-14IB/ipoib: Limit call to free rdma_netdev for capable devicesAlex Vesker2-3/+8
Limit calls to free_rdma_netdev() for capable devices only. Fixes: cd565b4b51e5 ('IB/IPoIB: Support acceleration options callbacks') Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2017-06-14IB/ipoib: Fix memory leaks for child interfaces privAlex Vesker2-2/+10
There is a need to free priv explicitly and not just to release the device, child priv is freed explicitly on remove flow and this patch also includes priv free on error flow in P_key creation and also in add_port. Fixes: cd565b4b51e5 ('IB/IPoIB: Support acceleration options callbacks') Signed-off-by: Alex Vesker <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2017-06-14net: update undefined ->ndo_change_mtu() commentMagnus Damm1-2/+1
Update ->ndo_change_mtu() callback comment to remove text about returning error in case of undefined callback. This change makes the comment match the existing code behavior. Signed-off-by: Magnus Damm <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-14perf tools: Fix build with ARCH=x86_64Jiada Wang6-25/+25
With commit: 0a943cb10ce78 (tools build: Add HOSTARCH Makefile variable) when building for ARCH=x86_64, ARCH=x86_64 is passed to perf instead of ARCH=x86, so the perf build process searchs header files from tools/arch/x86_64/include, which doesn't exist. The following build failure is seen: In file included from util/event.c:2:0: tools/include/uapi/linux/mman.h:4:27: fatal error: uapi/asm/mman.h: No such file or directory compilation terminated. Fix this issue by using SRCARCH instead of ARCH in perf, just like the main kernel Makefile and tools/objtool's. Signed-off-by: Jiada Wang <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Eugeniu Rosca <[email protected]> Cc: Jan Stancek <[email protected]> Cc: Masami Hiramatsu <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Ravi Bangoria <[email protected]> Cc: Rui Teng <[email protected]> Cc: Sukadev Bhattiprolu <[email protected]> Cc: Wang Nan <[email protected]> Fixes: 0a943cb10ce7 ("tools build: Add HOSTARCH Makefile variable") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-14perf evsel: Fix probing of precise_ip level for default cycles eventArnaldo Carvalho de Melo2-1/+13
Since commit 18e7a45af91a ("perf/x86: Reject non sampling events with precise_ip") returns -EINVAL for sys_perf_event_open() with an attribute with (attr.precise_ip > 0 && attr.sample_period == 0), just like is done in the routine used to probe the max precise level when no events were passed to 'perf record' or 'perf top', i.e.: perf_evsel__new_cycles() perf_event_attr__set_max_precise_ip() The x86 code, in x86_pmu_hw_config(), which is called all the way from sys_perf_event_open() did, starting with the aforementioned commit: /* There's no sense in having PEBS for non sampling events: */ if (!is_sampling_event(event)) return -EINVAL; Which makes it fail for cycles:ppp, cycles:pp and cycles:p, always using just the non precise cycles variant. To make sure that this is the case, I tested it, before this patch, with: # perf probe -L x86_pmu_hw_config <x86_pmu_hw_config@/home/acme/git/linux/arch/x86/events/core.c:0> 0 int x86_pmu_hw_config(struct perf_event *event) 1 { 2 if (event->attr.precise_ip) { <SNIP> 17 if (event->attr.precise_ip > precise) 18 return -EOPNOTSUPP; /* There's no sense in having PEBS for non sampling events: */ 21 if (!is_sampling_event(event)) 22 return -EINVAL; } <SNIP> # perf probe x86_pmu_hw_config:22 Added new events: probe:x86_pmu_hw_config (on x86_pmu_hw_config:22) probe:x86_pmu_hw_config_1 (on x86_pmu_hw_config:22) You can now use it in all perf tools, such as: perf record -e probe:x86_pmu_hw_config_1 -aR sleep 1 # perf trace -e perf_event_open,probe:x86_pmu_hwconfig*/max-stack=16/ perf record usleep 1 0.000 ( 0.015 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ... 0.015 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1)) x86_pmu_hw_config ([kernel.kallsyms]) hsw_hw_config ([kernel.kallsyms]) x86_pmu_event_init ([kernel.kallsyms]) perf_try_init_event ([kernel.kallsyms]) perf_event_alloc ([kernel.kallsyms]) SYSC_perf_event_open ([kernel.kallsyms]) sys_perf_event_open ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) return_from_SYSCALL_64 ([kernel.kallsyms]) syscall (/usr/lib64/libc-2.24.so) perf_event_attr__set_max_precise_ip (/home/acme/bin/perf) perf_evsel__new_cycles (/home/acme/bin/perf) perf_evlist__add_default (/home/acme/bin/perf) cmd_record (/home/acme/bin/perf) run_builtin (/home/acme/bin/perf) handle_internal_command (/home/acme/bin/perf) 0.000 ( 0.021 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument 0.023 ( 0.002 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ... 0.025 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1)) x86_pmu_hw_config ([kernel.kallsyms]) hsw_hw_config ([kernel.kallsyms]) x86_pmu_event_init ([kernel.kallsyms]) perf_try_init_event ([kernel.kallsyms]) perf_event_alloc ([kernel.kallsyms]) SYSC_perf_event_open ([kernel.kallsyms]) sys_perf_event_open ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) return_from_SYSCALL_64 ([kernel.kallsyms]) syscall (/usr/lib64/libc-2.24.so) perf_event_attr__set_max_precise_ip (/home/acme/bin/perf) perf_evsel__new_cycles (/home/acme/bin/perf) perf_evlist__add_default (/home/acme/bin/perf) cmd_record (/home/acme/bin/perf) run_builtin (/home/acme/bin/perf) handle_internal_command (/home/acme/bin/perf) 0.023 ( 0.004 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument 0.028 ( 0.002 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ... 0.030 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1)) x86_pmu_hw_config ([kernel.kallsyms]) hsw_hw_config ([kernel.kallsyms]) x86_pmu_event_init ([kernel.kallsyms]) perf_try_init_event ([kernel.kallsyms]) perf_event_alloc ([kernel.kallsyms]) SYSC_perf_event_open ([kernel.kallsyms]) sys_perf_event_open ([kernel.kallsyms]) do_syscall_64 ([kernel.kallsyms]) return_from_SYSCALL_64 ([kernel.kallsyms]) syscall (/usr/lib64/libc-2.24.so) perf_event_attr__set_max_precise_ip (/home/acme/bin/perf) perf_evsel__new_cycles (/home/acme/bin/perf) perf_evlist__add_default (/home/acme/bin/perf) cmd_record (/home/acme/bin/perf) run_builtin (/home/acme/bin/perf) handle_internal_command (/home/acme/bin/perf) 0.028 ( 0.004 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument 41.018 ( 0.012 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8b5dd0, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 41.065 ( 0.011 ms): perf/4150 perf_event_open(attr_uptr: 0x3c7db78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 41.080 ( 0.006 ms): perf/4150 perf_event_open(attr_uptr: 0x3c7db78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 41.103 ( 0.010 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), group_fd: -1, flags: FD_CLOEXEC) = 4 41.115 ( 0.006 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 5 41.122 ( 0.004 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 6 41.128 ( 0.008 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 8 [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.017 MB perf.data (2 samples) ] # I.e. that return -EINVAL in x86_pmu_hw_config() is hit three times. So fix it by just setting attr.sample_period Now, after this patch: # perf trace --max-stack=2 -e perf_event_open,probe:x86_pmu_hw_config* perf record usleep 1 [ perf record: Woken up 1 times to write data ] 0.000 ( 0.017 ms): perf/8469 perf_event_open(attr_uptr: 0x7ffe36c27d10, pid: -1, cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 4 syscall (/usr/lib64/libc-2.24.so) perf_event_open_cloexec_flag (/home/acme/bin/perf) 0.050 ( 0.031 ms): perf/8469 perf_event_open(attr_uptr: 0x24ebb78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 syscall (/usr/lib64/libc-2.24.so) perf_evlist__config (/home/acme/bin/perf) 0.092 ( 0.040 ms): perf/8469 perf_event_open(attr_uptr: 0x24ebb78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4 syscall (/usr/lib64/libc-2.24.so) perf_evlist__config (/home/acme/bin/perf) 0.143 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, cpu: -1, group_fd: -1 ) = 4 syscall (/usr/lib64/libc-2.24.so) perf_event_attr__set_max_precise_ip (/home/acme/bin/perf) 0.161 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), group_fd: -1, flags: FD_CLOEXEC) = 4 syscall (/usr/lib64/libc-2.24.so) perf_evsel__open (/home/acme/bin/perf) 0.171 ( 0.005 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 5 syscall (/usr/lib64/libc-2.24.so) perf_evsel__open (/home/acme/bin/perf) 0.180 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 6 syscall (/usr/lib64/libc-2.24.so) perf_evsel__open (/home/acme/bin/perf) 0.190 ( 0.005 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 8 syscall (/usr/lib64/libc-2.24.so) perf_evsel__open (/home/acme/bin/perf) [ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ] # The probe one called from perf_event_attr__set_max_precise_ip() works the first time, with attr.precise_ip = 3, wit hthe next ones being the per cpu ones for the cycles:ppp event. And here is the text from a report and alternative proposed patch by Thomas-Mich Richter: --- On s390 the counter and sampling facility do not support a precise IP skid level and sometimes returns EOPNOTSUPP when structure member precise_ip in struct perf_event_attr is not set to zero. On s390 commnd 'perf record -- true' fails with error EOPNOTSUPP. This happens only when no events are specified on command line. The functions called are ... --> perf_evlist__add_default --> perf_evsel__new_cycles --> perf_event_attr__set_max_precise_ip The last function determines the value of structure member precise_ip by invoking the perf_event_open() system call and checking the return code. The first successful open is the value for precise_ip. However the value is determined without setting member sample_period and indicates no sampling. On s390 the counter facility and sampling facility are different. The above procedure determines a precise_ip value of 3 using the counter facility. Later it uses the sampling facility with a value of 3 and fails with EOPNOTSUPP. --- v2: Older compilers (e.g. gcc 4.4.7) don't support referencing members of unnamed union members in the container struct initialization, so move from: struct perf_event_attr attr = { ... .sample_period = 1, }; to right after it as: struct perf_event_attr attr = { ... }; attr.sample_period = 1; v3: We need to reset .sample_period to 0 to let the users of perf_evsel__new_cycles() to properly setup attr.sample_period or attr.sample_freq. Reported by Ingo Molnar. Reported-and-Acked-by: Thomas-Mich Richter <[email protected]> Acked-by: Hendrik Brueckner <[email protected]> Acked-by: Jiri Olsa <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Wang Nan <[email protected]> Fixes: 18e7a45af91a ("perf/x86: Reject non sampling events with precise_ip") Link: http://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2017-06-14net_sched: move tcf_lock down after gen_replace_estimator()WANG Cong1-5/+3
Laura reported a sleep-in-atomic kernel warning inside tcf_act_police_init() which calls gen_replace_estimator() with spinlock protection. It is not necessary in this case, we already have RTNL lock here so it is enough to protect concurrent writers. For the reader, i.e. tcf_act_police(), it needs to make decision based on this rate estimator, in the worst case we drop more/less packets than necessary while changing the rate in parallel, it is still acceptable. Reported-by: Laura Abbott <[email protected]> Reported-by: Nick Huber <[email protected]> Cc: Jamal Hadi Salim <[email protected]> Signed-off-by: Cong Wang <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-14ceph: unify inode i_ctime updateYan, Zheng2-3/+3
Current __ceph_setattr() can set inode's i_ctime to current_time(), req->r_stamp or attr->ia_ctime. These time stamps may have minor differences. It may cause potential problem. Signed-off-by: "Yan, Zheng" <[email protected]> Acked-by: Arnd Bergmann <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2017-06-14ceph: use current_kernel_time() to get request time stampYan, Zheng1-3/+1
ceph uses ktime_get_real_ts() to get request time stamp. In most other cases, current_kernel_time() is used to get time stamp for filesystem operations (called by current_time()). There is granularity difference between ktime_get_real_ts() and current_kernel_time(). The later one can be up to one jiffy behind the former one. This can causes inode's ctime to go back. Signed-off-by: "Yan, Zheng" <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2017-06-14ceph: check i_nlink while converting a file handle to dentryLuis Henriques1-0/+4
Converting a file handle to a dentry can be done call after the inode unlink. This means that __fh_to_dentry() requires an extra check to verify the number of links is not 0. The issue can be easily reproduced using xfstest generic/426, which does something like: name_to_handle_at(&fh) echo 3 > /proc/sys/vm/drop_caches unlink() open_by_handle_at(&fh) The call to open_by_handle_at() should fail, as the file doesn't exist anymore. Link: http://tracker.ceph.com/issues/19958 Signed-off-by: Luis Henriques <[email protected]> Reviewed-by: "Yan, Zheng" <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2017-06-14rxe: Fix a sleep-in-atomic bug in post_one_sendJia-Ju Bai1-7/+2
The driver may sleep under a spin lock, and the function call path is: post_one_send (acquire the lock by spin_lock_irqsave) init_send_wqe copy_from_user --> may sleep There is no flow that makes "qp->is_user" true, and copy_from_user may cause bug when a non-user pointer is used. So the lines of copy_from_user and check of "qp->is_user" are removed. Signed-off-by: Jia-Ju Bai <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Acked-by: Moni Shoua <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2017-06-14RDMA/qedr: Add 64KB PAGE_SIZE support to user-space queuesRam Amrani2-28/+41
Add 64KB PAGE_SIZE support to user-space CQ, SQ and RQ queues. De-facto it means that code was added to translate 64KB pages to smaller 4KB pages that the FW can handle. Otherwise, the FW would wrap (or jump to the next page) when reaching 4KB while the user space library will continue on the same large page. Note that MR code remains as is since the FW supports larger pages for MRs. Signed-off-by: Ram Amrani <[email protected]> Signed-off-by: Michal Kalderon <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2017-06-14RDMA/qedr: Initialize byte_len in WC of READ and SEND commandsMichal Kalderon1-0/+4
Initialize byte_len in work completion of RDMA_READ and RDMA_SEND. Exposed by uDAPL application. Signed-off-by: Michal Kalderon <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2017-06-14RDMA/bnxt_re: Remove FMR supportSelvin Xavier3-106/+2
Some issues observed with FMR implementation while running stress traffic. So removing the FMR verbs support for now. Signed-off-by: Selvin Xavier <[email protected]> Acked-by: Christoph Hellwig <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2017-06-14RDMA/bnxt_re: Fix RQE posting logicDevesh Sharma3-1/+20
This patch adds code to ring RQ Doorbell aggressively so that the adapter can DMA RQ buffers sooner, instead of DMA all WQEs in the post_recv WR list together at the end of the post_recv verb. Also use spinlock to serialize RQ posting Signed-off-by: Kalesh AP <[email protected]> Signed-off-by: Devesh Sharma <[email protected]> Signed-off-by: Selvin Xavier <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2017-06-14RDMA/bnxt_re: Add HW workaround for avoiding stall for UD QPsSomnath Kotur4-0/+24
HW stalls out after 0x800000 WQEs are posted for UD QPs. To workaround this problem, driver will send a modify_qp cmd to the HW at around the halfway mark(0x400000) so that FW can accordingly modify the QP context in the HW to prevent this stall. This workaround needs to be done for UD, QP1 and Raw Ethertype packets. Added a counter to keep track of WQEs posted during post_send. Signed-off-by: Somnath Kotur <[email protected]> Signed-off-by: Selvin Xavier <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2017-06-14RDMA/bnxt_re: Dereg MR in FW before freeing the fast_reg_page_listSelvin Xavier1-2/+6
If the host buffers are freed before destroying MR in HW, HW could try accessing these buffers. This could cause a host crash. Fixing the code to avoid this condition. Signed-off-by: Selvin Xavier <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2017-06-14RDMA/bnxt_re: HW workarounds for handling specific conditionsEddie Wai7-70/+509
This patch implements the following HW workarounds 1. The SQ depth needs to be augmented by 128 + 1 to avoid running into an Out of order CQE issue 2. Workaround to handle the problem where the HW fast path engine continues to access DMA memory in retranmission mode even after the WQE has already been completed. If the HW reports this condition, driver detects it and posts a Fence WQE. The driver stops reporting the completions to stack until it receives completion for Fence WQE. Signed-off-by: Eddie Wai <[email protected]> Signed-off-by: Sriharsha Basavapatna <[email protected]> Signed-off-by: Selvin Xavier <[email protected]> Reviewed-by: Leon Romanovsky <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
2017-06-14ALSA: pcm: Don't treat NULL chmap as a fatal errorTakashi Iwai1-2/+2
The standard PCM chmap helper callbacks treat the NULL info->chmap as a fatal error and spews the kernel warning with stack trace when CONFIG_SND_DEBUG is on. This was OK, originally it was supposed to be always static and non-NULL. But, as the recent addition of Intel LPE audio driver shows, the chmap content may vary dynamically, and it can be even NULL when disconnected. The user still sees the kernel warning unnecessarily. For clearing such a confusion, this patch simply removes the snd_BUG_ON() in each place, just returns an error without warning. Cc: <[email protected]> # v4.11+ Signed-off-by: Takashi Iwai <[email protected]>
2017-06-14drm/radeon: Fix overflow of watermark calcs at > 4k resolutions.Mario Kleiner3-6/+15
Commit e6b9a6c84b93 ("drm/radeon: Make display watermark calculations more accurate") made watermark calculations more accurate, but not for > 4k resolutions on 32-Bit architectures, as it introduced an integer overflow for those setups and resolutions. Fix this by proper u64 casting and division. Signed-off-by: Mario Kleiner <[email protected]> Reported-by: Ben Hutchings <[email protected]> Fixes: e6b9a6c84b93 ("drm/radeon: Make display watermark calculations more accurate") Cc: Ben Hutchings <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Alex Deucher <[email protected]>
2017-06-14drm/amdgpu: Fix overflow of watermark calcs at > 4k resolutions.Mario Kleiner4-8/+20
Commit d63c277dc672e0 ("drm/amdgpu: Make display watermark calculations more accurate") made watermark calculations more accurate, but not for > 4k resolutions on 32-Bit architectures, as it introduced an integer overflow for those setups and resolutions. Fix this by proper u64 casting and division. Signed-off-by: Mario Kleiner <[email protected]> Reported-by: Ben Hutchings <[email protected]> Fixes: d63c277dc672 ("drm/amdgpu: Make display watermark calculations more accurate") Cc: Ben Hutchings <[email protected]> Cc: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Alex Deucher <[email protected]>
2017-06-14drm/radeon: fix "force the UVD DPB into VRAM as well"Christian König1-1/+1
The DPB must be in VRAM, but not in the first segment. Signed-off-by: Christian König <[email protected]> Tested-by: Arthur Marsh <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2017-06-14dev_ioctl: copy only the smaller struct iwreq for wextJohannes Berg3-8/+21
Unfortunately, struct iwreq isn't a proper subset of struct ifreq, but is still handled by the same code path. Robert reported that then applications may (randomly) fault if the struct iwreq they pass happens to land within 8 bytes of the end of a mapping (the struct is only 32 bytes, vs. struct ifreq's 40 bytes). To fix this, pull out the code handling wireless extension ioctls and copy only the smaller structure in this case. This bug goes back a long time, I tracked that it was introduced into mainline in 2.1.15, over 20 years ago! This fixes https://bugzilla.kernel.org/show_bug.cgi?id=195869 Reported-by: Robert O'Callahan <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2017-06-14wireless: wext: use struct iwreq earlier in the call chainJohannes Berg1-8/+7
To make it clear that we never use struct ifreq, cast from it directly in the wext entrypoint and use struct iwreq from there on. The next patch will remove the cast again and pass the correct struct from the beginning. Signed-off-by: Johannes Berg <[email protected]>
2017-06-14Staging: rtl8723bs: fix an error code in isFileReadable()Dan Carpenter1-1/+1
The caller only cares about zero vs non-zero so this code actually works fine but we should be returning a negative error code instead of a valid pointer casted to int. Fixes: 554c0a3abf21 ("staging: Add rtl8723bs sdio wifi driver") Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Greg Kroah-Hartman <[email protected]>
2017-06-14video: fbdev: udlfb: drop log level for blankingMike Gerow1-2/+2
Drop log level for blanking from info to debug. Xorg likes to habitually unblank when already unblanked and this can fill up logs over a long period of time. Signed-off-by: Mike Gerow <[email protected]> Cc: [email protected] Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
2017-06-14video: fbdev: via: remove possibly unused variablesArnd Bergmann1-5/+3
When CONFIG_PROC_FS is disabled, we get warnings about unused variables as remove_proc_entry() evaluates to an empty macro. drivers/video/fbdev/via/viafbdev.c: In function 'viafb_remove_proc': drivers/video/fbdev/via/viafbdev.c:1635:4: error: unused variable 'iga2_entry' [-Werror=unused-variable] drivers/video/fbdev/via/viafbdev.c:1634:4: error: unused variable 'iga1_entry' [-Werror=unused-variable] These are easy to avoid by using the pointer from the structure. Signed-off-by: Arnd Bergmann <[email protected]> Cc: Florian Tobias Schandinat <[email protected]> Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
2017-06-14video: fbdev: add missing USB-descriptor endianness conversionsJohan Hovold2-4/+6
Add the missing endianness conversions when printing the USB device-descriptor idVendor, idProduct and bcdDevice fields during probe. Signed-off-by: Johan Hovold <[email protected]> Cc: Steve Glendinning <[email protected]> Cc: Bernie Thompson <[email protected]> Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
2017-06-14video: fbdev: avoid int-in-bool-context warningArnd Bergmann1-1/+1
gcc-7 suspects this code might be wrong because we use the result of a multiplication as a bool: drivers/video/fbdev/core/fbmon.c: In function 'fb_edid_add_monspecs': drivers/video/fbdev/core/fbmon.c:1051:84: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context] It's actually fine, so let's add a comparison to zero to make that clear to the compiler too. Signed-off-by: Arnd Bergmann <[email protected]> Cc: Andrew Morton <[email protected]> Signed-off-by: Bartlomiej Zolnierkiewicz <[email protected]>
2017-06-14Merge tag 'iio-fixes-for-4.12b' of ↵Greg Kroah-Hartman7-12/+49
git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus Jonathan writes: Second set of IIO fixes for the 4.12 cycle. * buffer-dma / buffer-dmaengine - Fix missing include of buffer_impl.h after the split of buffer.h. No driver in mainline is currently using these buffers so it wasn't picked up by automated build tests. * ad7152 - Fix a deadlock in ad7152_write_raw_samp_freq as the chip_state lock was already held. * inv_mpu6050 - Add low pass filter setting for chips newer than the MPU6500. None of use previously picked up no the fact it was different on these newer chips. It is separately set for the acceleration on these parts. There is no normal reason to set it differently so the userspace interface remains the same as for early parts. * meson-saradc: - Fix a potential crash by NULL pointer dereference in meson_sar_adc_clear_fifo. * mxs-lradc - Fix a return value check where IS_ERR is used on a function that returns NULL on error
2017-06-14ALSA: hda - Add Coffelake PCI IDMegha Dey1-1/+5
Coffelake is another Intel part, so need to add PCI ID for it. Signed-off-by: Megha Dey <[email protected]> Signed-off-by: Subhransu S. Prusty <[email protected]> Acked-by: Vinod Koul <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2017-06-14wireless: wext: remove ndo_do_ioctl fallbackJohannes Berg1-3/+0
There are no longer any drivers (in the tree proper, I didn't check all the staging drivers) that take WEXT ioctls through this API, the only remaining ones that even have ndo_do_ioctl are using it only for private ioctls. Therefore, we can remove this call. Signed-off-by: Johannes Berg <[email protected]>
2017-06-14powerpc/npu-dma: Remove spurious WARN_ON when a PCI device has no of_nodeAlistair Popple1-1/+2
Commit 4c3b89effc28 ("powerpc/powernv: Add sanity checks to pnv_pci_get_{gpu|npu}_dev") introduced explicit warnings in pnv_pci_get_npu_dev() when a PCIe device has no associated device-tree node. However not all PCIe devices have an of_node and pnv_pci_get_npu_dev() gets indirectly called at least once for every PCIe device in the system. This results in spurious WARN_ON()'s so remove it. The same situation should not exist for pnv_pci_get_gpu_dev() as any NPU based PCIe device requires a device-tree node. Fixes: 4c3b89effc28 ("powerpc/powernv: Add sanity checks to pnv_pci_get_{gpu|npu}_dev") Reported-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Alistair Popple <[email protected]> Signed-off-by: Michael Ellerman <[email protected]>
2017-06-13xen-blkback: don't leak stack data via response ringJan Beulich2-31/+17
Rather than constructing a local structure instance on the stack, fill the fields directly on the shared ring, just like other backends do. Build on the fact that all response structure flavors are actually identical (the old code did make this assumption too). This is XSA-216. Cc: [email protected] Signed-off-by: Jan Beulich <[email protected]> Reviewed-by: Konrad Rzeszutek Wilk <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2017-06-13xen/blkback: don't use xen_blkif_get() in xen-blkback kthreadJuergen Gross2-4/+0
There is no need to use xen_blkif_get()/xen_blkif_put() in the kthread of xen-blkback. Thread stopping is synchronous and using the blkif reference counting in the kthread will avoid to ever let the reference count drop to zero at the end of an I/O running concurrent to disconnecting and multiple rings. Setting ring->xenblkd to NULL after stopping the kthread isn't needed as the kthread does this already. Signed-off-by: Juergen Gross <[email protected]> Tested-by: Steven Haigh <[email protected]> Acked-by: Roger Pau Monné <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2017-06-13caif: Add sockaddr length check before accessing sa_family in connect handlerMateusz Jurczyk1-0/+4
Verify that the caller-provided sockaddr structure is large enough to contain the sa_family field, before accessing it in the connect() handler of the AF_CAIF socket. Since the syscall doesn't enforce a minimum size of the corresponding memory region, very short sockaddrs (zero or one byte long) result in operating on uninitialized memory while referencing sa_family. Signed-off-by: Mateusz Jurczyk <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2017-06-13xen/blkback: don't free be structure too earlyJuergen Gross1-4/+3
The be structure must not be freed when freeing the blkif structure isn't done. Otherwise a use-after-free of be when unmapping the ring used for communicating with the frontend will occur in case of a late call of xenblk_disconnect() (e.g. due to an I/O still active when trying to disconnect). Signed-off-by: Juergen Gross <[email protected]> Tested-by: Steven Haigh <[email protected]> Acked-by: Roger Pau Monné <[email protected]> Signed-off-by: Konrad Rzeszutek Wilk <[email protected]>
2017-06-13RDMA/bnxt_re: Fixing the Control path command and response handlingDevesh Sharma5-605/+318
Fixing a concurrency issue with creq handling. Each caller was given a globally managed crsq element, which was accessed outside a lock. This could result in corruption, if lot of applications are simultaneously issuing Control Path commands. Now, each caller will provide its own response buffer and the responses will be copied under a lock. Also, Fixing the queue full condition check for the CMDQ. As a part of these changes, the control path code is refactored to remove the code replication in the response status checking. Signed-off-by: Devesh Sharma <[email protected]> Signed-off-by: Selvin Xavier <[email protected]> Signed-off-by: Doug Ledford <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.