aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-02-26idr: Fix handling of IDs above INT_MAXMatthew Wilcox2-6/+59
Khalid reported that the kernel selftests are currently failing: selftests: test_bpf.sh ======================================== test_bpf: [FAIL] not ok 1..8 selftests: test_bpf.sh [FAIL] He bisected it to 6ce711f2750031d12cec91384ac5cfa0a485b60a ("idr: Make 1-based IDRs more efficient"). The root cause is doing a signed comparison in idr_alloc_u32() instead of an unsigned comparison. I went looking for any similar problems and found a couple (which would each result in the failure to warn in two situations that aren't supposed to happen). I knocked up a few test-cases to prove that I was right and added them to the test-suite. Reported-by: Khalid Aziz <[email protected]> Tested-by: Khalid Aziz <[email protected]> Signed-off-by: Matthew Wilcox <[email protected]>
2018-02-26hdlc_ppp: carrier detect ok, don't turn off negotiationDenis Du1-1/+4
Sometimes when physical lines have a just good noise to make the protocol handshaking fail, but the carrier detect still good. Then after remove of the noise, nobody will trigger this protocol to be start again to cause the link to never come back. The fix is when the carrier is still on, not terminate the protocol handshaking. Signed-off-by: Denis Du <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26blktrace_api.h: fix comment for struct blk_user_trace_setupEric Biggers1-1/+1
'struct blk_user_trace_setup' is passed to BLKTRACESETUP, not BLKTRACESTART. Signed-off-by: Eric Biggers <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-02-26tuntap: correctly add the missing XDP flushJason Wang1-0/+1
We don't flush batched XDP packets through xdp_do_flush_map(), this will cause packets stall at TX queue. Consider we don't do XDP on NAPI poll(), the only possible fix is to call xdp_do_flush_map() immediately after xdp_do_redirect(). Note, this in fact won't try to batch packets through devmap, we could address in the future. Reported-by: Christoffer Dall <[email protected]> Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26tuntap: disable preemption during XDP processingJason Wang1-0/+6
Except for tuntap, all other drivers' XDP was implemented at NAPI poll() routine in a bh. This guarantees all XDP operation were done at the same CPU which is required by e.g BFP_MAP_TYPE_PERCPU_ARRAY. But for tuntap, we do it in process context and we try to protect XDP processing by RCU reader lock. This is insufficient since CONFIG_PREEMPT_RCU can preempt the RCU reader critical section which breaks the assumption that all XDP were processed in the same CPU. Fixing this by simply disabling preemption during XDP processing. Fixes: 761876c857cb ("tap: XDP support") Signed-off-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26Revert "tuntap: add missing xdp flush"Jason Wang1-15/+0
This reverts commit 762c330d670e3d4b795cf7a8d761866fdd1eef49. The reason is we try to batch packets for devmap which causes calling xdp_do_flush() in the process context. Simply disabling preemption may not work since process may move among processors which lead xdp_do_flush() to miss some flushes on some processors. So simply revert the patch, a follow-up patch will add the xdp flush correctly. Reported-by: Christoffer Dall <[email protected]> Fixes: 762c330d670e ("tuntap: add missing xdp flush") Signed-off-by: Jason Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26ixgbe: fix crash in build_skb Rx code pathEmil Tantilov1-0/+8
Add check for build_skb enabled ring in ixgbe_dma_sync_frag(). In that case &skb_shinfo(skb)->frags[0] may not always be set which can lead to a crash. Instead we derive the page offset from skb->data. Fixes: 42073d91a214 ("ixgbe: Have the CPU take ownership of the buffers sooner") CC: stable <[email protected]> Reported-by: Ambarish Soman <[email protected]> Suggested-by: Alexander Duyck <[email protected]> Signed-off-by: Emil Tantilov <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26ARM: orion5x: Revert commit 4904dbda41c8.David S. Miller3-10/+95
It is not valid for orion5x to use mac_pton(). First of all, the orion5x buffer is not NULL terminated. mac_pton() has no business operating on non-NULL terminated buffers because only the caller can know that this is valid and in what manner it is ok to parse this NULL'less buffer. Second of all, orion5x operates on an __iomem pointer, which cannot be dereferenced using normal C pointer operations. Accesses to such areas much be performed with the proper iomem accessors. Fixes: 4904dbda41c8 ("ARM: orion5x: use mac_pton() helper") Signed-off-by: David S. Miller <[email protected]>
2018-02-26Merge tag 'edac_fixes_for_4.16' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp Pull EDAC fix from Borislav Petkov: "sb_edac: Prevent memory corruption on KNL (from Anna Karbownik)" * tag 'edac_fixes_for_4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: EDAC, sb_edac: Fix out of bound writes during DIMM configuration on KNL
2018-02-26xfs: fix potential memory leak in mount option parsingChengguang Xu1-0/+2
When specifying string type mount option (e.g., logdev) several times in a mount, current option parsing may cause memory leak. Hence, call kfree for previous one in this case. Signed-off-by: Chengguang Xu <[email protected]> Reviewed-by: Eric Sandeen <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Darrick J. Wong <[email protected]>
2018-02-26Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds51-303/+604
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "Yet another pile of melted spectrum related changes: - sanitize the array_index_nospec protection mechanism: Remove the overengineered array_index_nospec_mask_check() magic and allow const-qualified types as index to avoid temporary storage in a non-const local variable. - make the microcode loader more robust by properly propagating error codes. Provide information about new feature bits after micro code was updated so administrators can act upon. - optimizations of the entry ASM code which reduce code footprint and make the code simpler and faster. - fix the {pmd,pud}_{set,clear}_flags() implementations to work properly on paravirt kernels by removing the address translation operations. - revert the harmful vmexit_fill_RSB() optimization - use IBRS around firmware calls - teach objtool about retpolines and add annotations for indirect jumps and calls. - explicitly disable jumplabel patching in __init code and handle patching failures properly instead of silently ignoring them. - remove indirect paravirt calls for writing the speculation control MSR as these calls are obviously proving the same attack vector which is tried to be mitigated. - a few small fixes which address build issues with recent compiler and assembler versions" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (38 commits) KVM/VMX: Optimize vmx_vcpu_run() and svm_vcpu_run() by marking the RDMSR path as unlikely() KVM/x86: Remove indirect MSR op calls from SPEC_CTRL objtool, retpolines: Integrate objtool with retpoline support more closely x86/entry/64: Simplify ENCODE_FRAME_POINTER extable: Make init_kernel_text() global jump_label: Warn on failed jump_label patching attempt jump_label: Explicitly disable jump labels in __init code x86/entry/64: Open-code switch_to_thread_stack() x86/entry/64: Move ASM_CLAC to interrupt_entry() x86/entry/64: Remove 'interrupt' macro x86/entry/64: Move the switch_to_thread_stack() call to interrupt_entry() x86/entry/64: Move ENTER_IRQ_STACK from interrupt macro to interrupt_entry x86/entry/64: Move PUSH_AND_CLEAR_REGS from interrupt macro to helper function x86/speculation: Move firmware_restrict_branch_speculation_*() from C to CPP objtool: Add module specific retpoline rules objtool: Add retpoline validation objtool: Use existing global variables for options x86/mm/sme, objtool: Annotate indirect call in sme_encrypt_execute() x86/boot, objtool: Annotate indirect jump in secondary_startup_64() x86/paravirt, objtool: Annotate indirect calls ...
2018-02-26Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds26-516/+698
Pull KVM fixes from Paolo Bonzini: "s390: - optimization for the exitless interrupt support that was merged in 4.16-rc1 - improve the branch prediction blocking for nested KVM - replace some jump tables with switch statements to improve expoline performance - fixes for multiple epoch facility ARM: - fix the interaction of userspace irqchip VMs with in-kernel irqchip VMs - make sure we can build 32-bit KVM/ARM with gcc-8. x86: - fixes for AMD SEV - fixes for Intel nested VMX, emulated UMIP and a dump_stack() on VM startup - fixes for async page fault migration - small optimization to PV TLB flush (new in 4.16-rc1) - syzkaller fixes Generic: - compiler warning fixes - syzkaller fixes - more improvements to the kvm_stat tool Two more small Spectre fixes are going to reach you via Ingo" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (40 commits) KVM: SVM: Fix SEV LAUNCH_SECRET command KVM: SVM: install RSM intercept KVM: SVM: no need to call access_ok() in LAUNCH_MEASURE command include: psp-sev: Capitalize invalid length enum crypto: ccp: Fix sparse, use plain integer as NULL pointer KVM: X86: Avoid traversing all the cpus for pv tlb flush when steal time is disabled x86/kvm: Make parse_no_xxx __init for kvm KVM: x86: fix backward migration with async_PF kvm: fix warning for non-x86 builds kvm: fix warning for CONFIG_HAVE_KVM_EVENTFD builds tools/kvm_stat: print 'Total' line for multiple events only tools/kvm_stat: group child events indented after parent tools/kvm_stat: separate drilldown and fields filtering tools/kvm_stat: eliminate extra guest/pid selection dialog tools/kvm_stat: mark private methods as such tools/kvm_stat: fix debugfs handling tools/kvm_stat: print error on invalid regex tools/kvm_stat: fix crash when filtering out all non-child trace events tools/kvm_stat: avoid 'is' for equality checks tools/kvm_stat: use a more pythonic way to iterate over dictionaries ...
2018-02-26Merge branch 'l2tp-fix-API-races-discovered-by-syzbot'David S. Miller5-166/+77
James Chapman says: ==================== l2tp: fix API races discovered by syzbot This patch series addresses several races with L2TP APIs discovered by syzbot. There are no functional changes. The set of patches 1-5 in combination fix the following syzbot reports. 19c09769f WARNING in debug_print_object 347bd5acd KASAN: use-after-free Read in inet_shutdown 6e6a5ec8d general protection fault in pppol2tp_connect 9df43faf0 KASAN: use-after-free Read in pppol2tp_connect My first attempts to fix these issues were as net-next patches but the series included other refactoring and cleanup work. I was asked to separate out the bugfixes and redo for the net tree, which is what these patches are. The changes are: 1. Fix inet_shutdown races when L2TP tunnels and sessions close. (patches 1-2) 2. Fix races with tunnel and its socket. (patch 3) 3. Fix race in pppol2tp_release with session and its socket. (patch 4) 4. Fix tunnel lookup use-after-free. (patch 5) All of the syzbot reproducers hit races in the tunnel and pppol2tp session create and destroy paths. These tests create and destroy pppol2tp tunnels and sessions rapidly using multiple threads, provoking races in several tunnel/session create/destroy paths. The key problem was that each tunnel/session socket could be destroyed while its associated tunnel/session object still existed (patches 3, 4). Patch 5 addresses a problem with the way tunnels are removed from the tunnel list. Patch 5 is tagged that it addresses all four syzbot issues, though all 5 patches are needed. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-02-26l2tp: fix tunnel lookup use-after-free raceJames Chapman1-7/+7
l2tp_tunnel_get walks the tunnel list to find a matching tunnel instance and if a match is found, its refcount is increased before returning the tunnel pointer. But when tunnel objects are destroyed, they are on the tunnel list after their refcount hits zero. Fix this by moving the code that removes the tunnel from the tunnel list from the tunnel socket destructor into in the l2tp_tunnel_delete path, before the tunnel refcount is decremented. refcount_t: increment on 0; use-after-free. WARNING: CPU: 3 PID: 13507 at lib/refcount.c:153 refcount_inc+0x47/0x50 Modules linked in: CPU: 3 PID: 13507 Comm: syzbot_6e6a5ec8 Not tainted 4.16.0-rc2+ #36 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:refcount_inc+0x47/0x50 RSP: 0018:ffff8800136ffb20 EFLAGS: 00010286 RAX: dffffc0000000008 RBX: ffff880017068e68 RCX: ffffffff814d3333 RDX: 0000000000000000 RSI: ffff88001a59f6d8 RDI: ffff88001a59f6d8 RBP: ffff8800136ffb28 R08: 0000000000000000 R09: 0000000000000000 R10: ffff8800136ffab0 R11: 0000000000000000 R12: ffff880017068e50 R13: 0000000000000000 R14: ffff8800174da800 R15: 0000000000000004 FS: 00007f403ab1e700(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000205fafd2 CR3: 0000000016770000 CR4: 00000000000006e0 Call Trace: l2tp_tunnel_get+0x2dd/0x4e0 pppol2tp_connect+0x428/0x13c0 ? pppol2tp_session_create+0x170/0x170 ? __might_fault+0x115/0x1d0 ? lock_downgrade+0x860/0x860 ? __might_fault+0xe5/0x1d0 ? security_socket_connect+0x8e/0xc0 SYSC_connect+0x1b6/0x310 ? SYSC_bind+0x280/0x280 ? __do_page_fault+0x5d1/0xca0 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 SyS_connect+0x29/0x30 ? SyS_accept+0x40/0x40 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7f403a42f259 RSP: 002b:00007f403ab1dee8 EFLAGS: 00000296 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 00000000205fafe4 RCX: 00007f403a42f259 RDX: 000000000000002e RSI: 00000000205fafd2 RDI: 0000000000000004 RBP: 00007f403ab1df20 R08: 00007f403ab1e700 R09: 0000000000000000 R10: 00007f403ab1e700 R11: 0000000000000296 R12: 0000000000000000 R13: 00007ffc81906cbf R14: 0000000000000000 R15: 00007f403ab2b040 Code: 3b ff 5b 5d c3 e8 ca 5f 3b ff 80 3d 49 8e 66 04 00 75 ea e8 bc 5f 3b ff 48 c7 c7 60 69 64 85 c6 05 34 8e 66 04 01 e8 59 49 15 ff <0f> 0b eb ce 0f 1f 44 00 00 55 48 89 e5 41 56 41 55 41 54 53 49 Fixes: f8ccac0e44934 ("l2tp: put tunnel socket release on a workqueue") Reported-and-tested-by: [email protected] Reported-and-tested-by: [email protected] Reported-and-tested-by: [email protected] Reported-and-tested-by: [email protected] Signed-off-by: James Chapman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26l2tp: fix race in pppol2tp_release with session object destroyJames Chapman1-25/+27
pppol2tp_release uses call_rcu to put the final ref on its socket. But the session object doesn't hold a ref on the session socket so may be freed while the pppol2tp_put_sk RCU callback is scheduled. Fix this by having the session hold a ref on its socket until the session is destroyed. It is this ref that is dropped via call_rcu. Sessions are also deleted via l2tp_tunnel_closeall. This must now also put the final ref via call_rcu. So move the call_rcu call site into pppol2tp_session_close so that this happens in both destroy paths. A common destroy path should really be implemented, perhaps with l2tp_tunnel_closeall calling l2tp_session_delete like pppol2tp_release does, but this will be looked at later. ODEBUG: activate active (active state 1) object type: rcu_head hint: (null) WARNING: CPU: 3 PID: 13407 at lib/debugobjects.c:291 debug_print_object+0x166/0x220 Modules linked in: CPU: 3 PID: 13407 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #38 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:debug_print_object+0x166/0x220 RSP: 0018:ffff880013647a00 EFLAGS: 00010082 RAX: dffffc0000000008 RBX: 0000000000000003 RCX: ffffffff814d3333 RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff88001a59f6d0 RBP: ffff880013647a40 R08: 0000000000000000 R09: 0000000000000001 R10: ffff8800136479a8 R11: 0000000000000000 R12: 0000000000000001 R13: ffffffff86161420 R14: ffffffff85648b60 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88001a580000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020e77000 CR3: 0000000006022000 CR4: 00000000000006e0 Call Trace: debug_object_activate+0x38b/0x530 ? debug_object_assert_init+0x3b0/0x3b0 ? __mutex_unlock_slowpath+0x85/0x8b0 ? pppol2tp_session_destruct+0x110/0x110 __call_rcu.constprop.66+0x39/0x890 ? __call_rcu.constprop.66+0x39/0x890 call_rcu_sched+0x17/0x20 pppol2tp_release+0x2c7/0x440 ? fcntl_setlk+0xca0/0xca0 ? sock_alloc_file+0x340/0x340 sock_release+0x92/0x1e0 sock_close+0x1b/0x20 __fput+0x296/0x6e0 ____fput+0x1a/0x20 task_work_run+0x127/0x1a0 do_exit+0x7f9/0x2ce0 ? SYSC_connect+0x212/0x310 ? mm_update_next_owner+0x690/0x690 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 do_group_exit+0x10d/0x330 ? do_group_exit+0x330/0x330 SyS_exit_group+0x22/0x30 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7f362e471259 RSP: 002b:00007ffe389abe08 EFLAGS: 00000202 ORIG_RAX: 00000000000000e7 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f362e471259 RDX: 00007f362e471259 RSI: 000000000000002e RDI: 0000000000000000 RBP: 00007ffe389abe30 R08: 0000000000000000 R09: 00007f362e944270 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60 R13: 00007ffe389abf50 R14: 0000000000000000 R15: 0000000000000000 Code: 8d 3c dd a0 8f 64 85 48 89 fa 48 c1 ea 03 80 3c 02 00 75 7b 48 8b 14 dd a0 8f 64 85 4c 89 f6 48 c7 c7 20 85 64 85 e 8 2a 55 14 ff <0f> 0b 83 05 ad 2a 68 04 01 48 83 c4 18 5b 41 5c 41 5d 41 5e 41 Fixes: ee40fb2e1eb5b ("l2tp: protect sock pointer of struct pppol2tp_session with RCU") Signed-off-by: James Chapman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26l2tp: fix races with tunnel socket closeJames Chapman4-116/+42
The tunnel socket tunnel->sock (struct sock) is accessed when preparing a new ppp session on a tunnel at pppol2tp_session_init. If the socket is closed by a thread while another is creating a new session, the threads race. In pppol2tp_connect, the tunnel object may be created if the pppol2tp socket is associated with the special session_id 0 and the tunnel socket is looked up using the provided fd. When handling this, pppol2tp_connect cannot sock_hold the tunnel socket to prevent it being destroyed during pppol2tp_connect since this may itself may race with the socket being destroyed. Doing sockfd_lookup in pppol2tp_connect isn't sufficient to prevent tunnel->sock going away either because a given tunnel socket fd may be reused between calls to pppol2tp_connect. Instead, have l2tp_tunnel_create sock_hold the tunnel socket before it does sockfd_put. This ensures that the tunnel's socket is always extant while the tunnel object exists. Hold a ref on the socket until the tunnel is destroyed and ensure that all tunnel destroy paths go through a common function (l2tp_tunnel_delete) since this will do the final sock_put to release the tunnel socket. Since the tunnel's socket is now guaranteed to exist if the tunnel exists, we no longer need to use sockfd_lookup via l2tp_sock_to_tunnel to derive the tunnel from the socket since this is always sk_user_data. Also, sessions no longer sock_hold the tunnel socket since sessions already hold a tunnel ref and the tunnel sock will not be freed until the tunnel is freed. Removing these sock_holds in l2tp_session_register avoids a possible sock leak in the pppol2tp_connect error path if l2tp_session_register succeeds but attaching a ppp channel fails. The pppol2tp_connect error path could have been fixed instead and have the sock ref dropped when the session is freed, but doing a sock_put of the tunnel socket when the session is freed would require a new session_free callback. It is simpler to just remove the sock_hold of the tunnel socket in l2tp_session_register, now that the tunnel socket lifetime is guaranteed. Finally, some init code in l2tp_tunnel_create is reordered to ensure that the new tunnel object's refcount is set and the tunnel socket ref is taken before the tunnel socket destructor callbacks are set. kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] SMP KASAN Modules linked in: CPU: 0 PID: 4360 Comm: syzbot_19c09769 Not tainted 4.16.0-rc2+ #34 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 RIP: 0010:pppol2tp_session_init+0x1d6/0x500 RSP: 0018:ffff88001377fb40 EFLAGS: 00010212 RAX: dffffc0000000000 RBX: ffff88001636a940 RCX: ffffffff84836c1d RDX: 0000000000000045 RSI: 0000000055976744 RDI: 0000000000000228 RBP: ffff88001377fb60 R08: ffffffff84836bc8 R09: 0000000000000002 R10: ffff88001377fab8 R11: 0000000000000001 R12: 0000000000000000 R13: ffff88001636aac8 R14: ffff8800160f81c0 R15: 1ffff100026eff76 FS: 00007ffb3ea66700(0000) GS:ffff88001a400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020e77000 CR3: 0000000016261000 CR4: 00000000000006f0 Call Trace: pppol2tp_connect+0xd18/0x13c0 ? pppol2tp_session_create+0x170/0x170 ? __might_fault+0x115/0x1d0 ? lock_downgrade+0x860/0x860 ? __might_fault+0xe5/0x1d0 ? security_socket_connect+0x8e/0xc0 SYSC_connect+0x1b6/0x310 ? SYSC_bind+0x280/0x280 ? __do_page_fault+0x5d1/0xca0 ? up_read+0x1f/0x40 ? __do_page_fault+0x3c8/0xca0 SyS_connect+0x29/0x30 ? SyS_accept+0x40/0x40 do_syscall_64+0x1e0/0x730 ? trace_hardirqs_off_thunk+0x1a/0x1c entry_SYSCALL_64_after_hwframe+0x42/0xb7 RIP: 0033:0x7ffb3e376259 RSP: 002b:00007ffeda4f6508 EFLAGS: 00000202 ORIG_RAX: 000000000000002a RAX: ffffffffffffffda RBX: 0000000020e77012 RCX: 00007ffb3e376259 RDX: 000000000000002e RSI: 0000000020e77000 RDI: 0000000000000004 RBP: 00007ffeda4f6540 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000400b60 R13: 00007ffeda4f6660 R14: 0000000000000000 R15: 0000000000000000 Code: 80 3d b0 ff 06 02 00 0f 84 07 02 00 00 e8 13 d6 db fc 49 8d bc 24 28 02 00 00 48 b8 00 00 00 00 00 fc ff df 48 89 f a 48 c1 ea 03 <80> 3c 02 00 0f 85 ed 02 00 00 4d 8b a4 24 28 02 00 00 e8 13 16 Fixes: 80d84ef3ff1dd ("l2tp: prevent l2tp_tunnel_delete racing with userspace close") Signed-off-by: James Chapman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26l2tp: don't use inet_shutdown on ppp session destroyJames Chapman1-10/+0
Previously, if a ppp session was closed, we called inet_shutdown to mark the socket as unconnected such that userspace would get errors and then close the socket. This could race with userspace closing the socket. Instead, leave userspace to close the socket in its own time (our session will be detached anyway). BUG: KASAN: use-after-free in inet_shutdown+0x5d/0x1c0 Read of size 4 at addr ffff880010ea3ac0 by task syzbot_347bd5ac/8296 CPU: 3 PID: 8296 Comm: syzbot_347bd5ac Not tainted 4.16.0-rc1+ #91 Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 Call Trace: dump_stack+0x101/0x157 ? inet_shutdown+0x5d/0x1c0 print_address_description+0x78/0x260 ? inet_shutdown+0x5d/0x1c0 kasan_report+0x240/0x360 __asan_load4+0x78/0x80 inet_shutdown+0x5d/0x1c0 ? pppol2tp_show+0x80/0x80 pppol2tp_session_close+0x68/0xb0 l2tp_tunnel_closeall+0x199/0x210 ? udp_v6_flush_pending_frames+0x90/0x90 l2tp_udp_encap_destroy+0x6b/0xc0 ? l2tp_tunnel_del_work+0x2e0/0x2e0 udpv6_destroy_sock+0x8c/0x90 sk_common_release+0x47/0x190 udp_lib_close+0x15/0x20 inet_release+0x85/0xd0 inet6_release+0x43/0x60 sock_release+0x53/0x100 ? sock_alloc_file+0x260/0x260 sock_close+0x1b/0x20 __fput+0x19f/0x380 ____fput+0x1a/0x20 task_work_run+0xd2/0x110 exit_to_usermode_loop+0x18d/0x190 do_syscall_64+0x389/0x3b0 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x7fe240a45259 RSP: 002b:00007fe241132df8 EFLAGS: 00000297 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 00007fe240a45259 RDX: 00007fe240a45259 RSI: 0000000000000000 RDI: 00000000000000a5 RBP: 00007fe241132e20 R08: 00007fe241133700 R09: 0000000000000000 R10: 00007fe241133700 R11: 0000000000000297 R12: 0000000000000000 R13: 00007ffc49aff84f R14: 0000000000000000 R15: 00007fe241141040 Allocated by task 8331: save_stack+0x43/0xd0 kasan_kmalloc+0xad/0xe0 kasan_slab_alloc+0x12/0x20 kmem_cache_alloc+0x144/0x3e0 sock_alloc_inode+0x22/0x130 alloc_inode+0x3d/0xf0 new_inode_pseudo+0x1c/0x90 sock_alloc+0x30/0x110 __sock_create+0xaa/0x4c0 SyS_socket+0xbe/0x130 do_syscall_64+0x128/0x3b0 entry_SYSCALL_64_after_hwframe+0x26/0x9b Freed by task 8314: save_stack+0x43/0xd0 __kasan_slab_free+0x11a/0x170 kasan_slab_free+0xe/0x10 kmem_cache_free+0x88/0x2b0 sock_destroy_inode+0x49/0x50 destroy_inode+0x77/0xb0 evict+0x285/0x340 iput+0x429/0x530 dentry_unlink_inode+0x28c/0x2c0 __dentry_kill+0x1e3/0x2f0 dput.part.21+0x500/0x560 dput+0x24/0x30 __fput+0x2aa/0x380 ____fput+0x1a/0x20 task_work_run+0xd2/0x110 exit_to_usermode_loop+0x18d/0x190 do_syscall_64+0x389/0x3b0 entry_SYSCALL_64_after_hwframe+0x26/0x9b Fixes: fd558d186df2c ("l2tp: Split pppol2tp patch into separate l2tp and ppp parts") Signed-off-by: James Chapman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26l2tp: don't use inet_shutdown on tunnel destroyJames Chapman1-9/+2
Previously, if a tunnel was closed, we called inet_shutdown to mark the socket as unconnected such that userspace would get errors and then close the socket. This could race with userspace closing the socket. Instead, leave userspace to close the socket in its own time (our tunnel will be detached anyway). BUG: unable to handle kernel NULL pointer dereference at 00000000000000a0 IP: __lock_acquire+0x263/0x1630 PGD 0 P4D 0 Oops: 0000 [#1] SMP KASAN Modules linked in: CPU: 2 PID: 42 Comm: kworker/u8:2 Not tainted 4.15.0-rc7+ #129 Workqueue: l2tp l2tp_tunnel_del_work RIP: 0010:__lock_acquire+0x263/0x1630 RSP: 0018:ffff88001a37fc70 EFLAGS: 00010002 RAX: 0000000000000001 RBX: 0000000000000088 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ffff88001a37fd18 R08: 0000000000000001 R09: 0000000000000000 R10: 0000000000000000 R11: 00000000000076fd R12: 00000000000000a0 R13: ffff88001a3722c0 R14: 0000000000000001 R15: 0000000000000000 FS: 0000000000000000(0000) GS:ffff88001ad00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000a0 CR3: 000000001730b000 CR4: 00000000000006e0 Call Trace: ? __lock_acquire+0xc77/0x1630 ? console_trylock+0x11/0xa0 lock_acquire+0x117/0x230 ? lock_sock_nested+0x3a/0xa0 _raw_spin_lock_bh+0x3a/0x50 ? lock_sock_nested+0x3a/0xa0 lock_sock_nested+0x3a/0xa0 inet_shutdown+0x33/0xf0 l2tp_tunnel_del_work+0x60/0xef process_one_work+0x1ea/0x5f0 ? process_one_work+0x162/0x5f0 worker_thread+0x48/0x3e0 ? trace_hardirqs_on+0xd/0x10 kthread+0x108/0x140 ? process_one_work+0x5f0/0x5f0 ? kthread_stop+0x2a0/0x2a0 ret_from_fork+0x24/0x30 Code: 00 41 81 ff ff 1f 00 00 0f 87 7a 13 00 00 45 85 f6 49 8b 85 68 08 00 00 0f 84 ae 03 00 00 c7 44 24 18 00 00 00 00 e9 f0 00 00 00 <49> 81 3c 24 80 93 3f 83 b8 00 00 00 00 44 0f 44 c0 83 fe 01 0f RIP: __lock_acquire+0x263/0x1630 RSP: ffff88001a37fc70 CR2: 00000000000000a0 Fixes: 309795f4bec2d ("l2tp: Add netlink control API for L2TP") Signed-off-by: James Chapman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-26blockdev: Avoid two active bdev inodes for one deviceJan Kara1-2/+23
When blkdev_open() races with device removal and creation it can happen that unhashed bdev inode gets associated with newly created gendisk like: CPU0 CPU1 blkdev_open() bdev = bd_acquire() del_gendisk() bdev_unhash_inode(bdev); remove device create new device with the same number __blkdev_get() disk = get_gendisk() - gets reference to gendisk of the new device Now another blkdev_open() will not find original 'bdev' as it got unhashed, create a new one and associate it with the same 'disk' at which point problems start as we have two independent page caches for one device. Fix the problem by verifying that the bdev inode didn't get unhashed before we acquired gendisk reference. That way we make sure gendisk can get associated only with visible bdev inodes. Tested-by: Hou Tao <[email protected]> Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-02-26genhd: Fix BUG in blkdev_open()Jan Kara2-1/+21
When two blkdev_open() calls for a partition race with device removal and recreation, we can hit BUG_ON(!bd_may_claim(bdev, whole, holder)) in blkdev_open(). The race can happen as follows: CPU0 CPU1 CPU2 del_gendisk() bdev_unhash_inode(part1); blkdev_open(part1, O_EXCL) blkdev_open(part1, O_EXCL) bdev = bd_acquire() bdev = bd_acquire() blkdev_get(bdev) bd_start_claiming(bdev) - finds old inode 'whole' bd_prepare_to_claim() -> 0 bdev_unhash_inode(whole); <device removed> <new device under same number created> blkdev_get(bdev); bd_start_claiming(bdev) - finds new inode 'whole' bd_prepare_to_claim() - this also succeeds as we have different 'whole' here... - bad things happen now as we have two exclusive openers of the same bdev The problem here is that block device opens can see various intermediate states while gendisk is shutting down and then being recreated. We fix the problem by introducing new lookup_sem in gendisk that synchronizes gendisk deletion with get_gendisk() and furthermore by making sure that get_gendisk() does not return gendisk that is being (or has been) deleted. This makes sure that once we ever manage to look up newly created bdev inode, we are also guaranteed that following get_gendisk() will either return failure (and we fail open) or it returns gendisk for the new device and following bdget_disk() will return new bdev inode (i.e., blkdev_open() follows the path as if it is completely run after new device is created). Reported-and-analyzed-by: Hou Tao <[email protected]> Tested-by: Hou Tao <[email protected]> Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-02-26genhd: Fix use after free in __blkdev_get()Jan Kara1-2/+5
When two blkdev_open() calls race with device removal and recreation, __blkdev_get() can use looked up gendisk after it is freed: CPU0 CPU1 CPU2 del_gendisk(disk); bdev_unhash_inode(inode); blkdev_open() blkdev_open() bdev = bd_acquire(inode); - creates and returns new inode bdev = bd_acquire(inode); - returns the same inode __blkdev_get(devt) __blkdev_get(devt) disk = get_gendisk(devt); - got structure of device going away <finish device removal> <new device gets created under the same device number> disk = get_gendisk(devt); - got new device structure if (!bdev->bd_openers) { does the first open } if (!bdev->bd_openers) - false } else { put_disk_and_module(disk) - remember this was old device - this was last ref and disk is now freed } disk_unblock_events(disk); -> oops Fix the problem by making sure we drop reference to disk in __blkdev_get() only after we are really done with it. Reported-by: Hou Tao <[email protected]> Tested-by: Hou Tao <[email protected]> Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-02-26genhd: Add helper put_disk_and_module()Jan Kara4-27/+24
Add a proper counterpart to get_disk_and_module() - put_disk_and_module(). Currently it is opencoded in several places. Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-02-26genhd: Rename get_disk() to get_disk_and_module()Jan Kara10-15/+13
Rename get_disk() to get_disk_and_module() to make sure what the function does. It's not a great name but at least it is now clear that put_disk() is not it's counterpart. Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-02-26genhd: Fix leaked module reference for NVME devicesJan Kara1-0/+3
Commit 8ddcd653257c "block: introduce GENHD_FL_HIDDEN" added handling of hidden devices to get_gendisk() but forgot to drop module reference which is also acquired by get_disk(). Drop the reference as necessary. Arguably the function naming here is misleading as put_disk() is *not* the counterpart of get_disk() but let's fix that in the follow up commit since that will be more intrusive. Fixes: 8ddcd653257c18a669fcb75ee42c37054908e0d6 CC: Christoph Hellwig <[email protected]> Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-02-26riscv/barrier: Define __smp_{mb,rmb,wmb}Andrea Parri1-3/+3
Introduce __smp_{mb,rmb,wmb}, and rely on the generic definitions for smp_{mb,rmb,wmb}. A first consequence is that smp_{mb,rmb,wmb} map to a compiler barrier on !SMP (while their definition remains unchanged on SMP). As a further consequence, smp_load_acquire and smp_store_release have "fence rw,rw" instead of "fence iorw,iorw". Signed-off-by: Andrea Parri <[email protected]> Signed-off-by: Palmer Dabbelt <[email protected]>
2018-02-26media: vb2: Makefile: place vb2-trace together with vb2-coreMauro Carvalho Chehab1-4/+7
We don't want a separate module for vb2-trace. That fixes this warning: WARNING: modpost: missing MODULE_LICENSE() in drivers/media/common/videobuf2/vb2-trace.o When building as module. While here, add a SPDX header. Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2018-02-26xen/pvcalls: fix null pointer dereference on map->sockColin Ian King1-1/+1
Currently if map is null then a potential null pointer deference occurs when calling sock_release on map->sock. I believe the actual intention was to call sock_release on sock instead. Fix this. Fixes: 5db4d286a8ef ("xen/pvcalls: implement connect command") Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Signed-off-by: Juergen Gross <[email protected]>
2018-02-26direct-io: Fix sleep in atomic due to sync AIOJan Kara1-2/+1
Commit e864f39569f4 "fs: add RWF_DSYNC aand RWF_SYNC" added additional way for direct IO to become synchronous and thus trigger fsync from the IO completion handler. Then commit 9830f4be159b "fs: Use RWF_* flags for AIO operations" allowed these flags to be set for AIO as well. However that commit forgot to update the condition checking whether the IO completion handling should be defered to a workqueue and thus AIO DIO with RWF_[D]SYNC set will call fsync() from IRQ context resulting in sleep in atomic. Fix the problem by checking directly iocb flags (the same way as it is done in dio_complete()) instead of checking all conditions that could lead to IO being synchronous. CC: Christoph Hellwig <[email protected]> CC: Goldwyn Rodrigues <[email protected]> CC: [email protected] Reported-by: Mark Rutland <[email protected]> Tested-by: Mark Rutland <[email protected]> Fixes: 9830f4be159b29399d107bffb99e0132bc5aedd4 Signed-off-by: Jan Kara <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-02-26ceph: fix dentry leak when failing to init debugfsChengguang Xu1-11/+5
When failing from ceph_fs_debugfs_init() in ceph_real_mount(), there is lack of dput of root_dentry and it causes slab errors, so change the calling order of ceph_fs_debugfs_init() and open_root_dentry() and do some cleanups to avoid this issue. Signed-off-by: Chengguang Xu <[email protected]> Reviewed-by: "Yan, Zheng" <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2018-02-26libceph, ceph: avoid memory leak when specifying same option several timesChengguang Xu2-0/+9
When parsing string option, in order to avoid memory leak we need to carefully free it first in case of specifying same option several times. Signed-off-by: Chengguang Xu <[email protected]> Reviewed-by: Ilya Dryomov <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2018-02-26ceph: flush dirty caps of unlinked inode ASAPZhi Zhang3-24/+32
Client should release unlinked inode from its cache ASAP. But client can't release inode with dirty caps. Link: http://tracker.ceph.com/issues/22886 Signed-off-by: Zhi Zhang <[email protected]> Reviewed-by: "Yan, Zheng" <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
2018-02-26ALSA: hda - Fix pincfg at resume on Lenovo T470 dockTakashi Iwai1-1/+2
We've added a quirk to enable the recent Lenovo dock support, where it overwrites the pin configs of NID 0x17 and 19, not only updating the pin config cache. It works right after the boot, but the problem is that the pin configs are occasionally cleared when the machine goes to PM. Meanwhile the quirk writes the pin configs only at the pre-probe, so this won't be applied any longer. For addressing that issue, this patch moves the code to overwrite the pin configs into HDA_FIXUP_ACT_INIT section so that it's always applied at both probe and resume time. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=195161 Fixes: 61fcf8ece9b6 ("ALSA: hda/realtek - Enable Thinkpad Dock device for ALC298 platform") Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-02-26clocksource/drivers/fsl_ftm_timer: Fix error return checkingColin Ian King1-1/+1
The error checks on freq for a negative error return always fails because freq is unsigned and can never be negative. Fix this by making freq a signed long. Detected with Coccinelle: drivers/clocksource/fsl_ftm_timer.c:287:5-9: WARNING: Unsigned expression compared with zero: freq <= 0 drivers/clocksource/fsl_ftm_timer.c:291:5-9: WARNING: Unsigned expression compared with zero: freq <= 0 Fixes: 2529c3a33079 ("clocksource: Add Freescale FlexTimer Module (FTM) timer support") Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Daniel Lezcano <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-02-26drm/sun4i: Protect the TCON pixel clocksMaxime Ripard1-2/+2
Both TCON clocks are very sensitive to clock changes, since any change might lead to improper timings. Make sure our rate is never changed. Tested-by: Giulio Benetti <[email protected]> Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/d5224d2e81ecf73dc09f234e580ada52c00eaee3.1519204731.git-series.maxime.ripard@bootlin.com
2018-02-26drm/sun4i: Enable the output on the pins (tcon0)Ondrej Jirman1-0/+3
I noticed that with 4.16-rc1 LVDS output on A83T based TBS A711 tablet doesn't work (there's output but it's garbled). I compared some older patches for LVDS support with the mainlined ones and this change is missing from mainline Linux. I don't know what the register does exactly and the harcoded register value doesn't inspire much confidence that it will work in a general case, so I'm sending this RFC. This patch fixes the issue on A83T. Signed-off-by: Ondrej Jirman <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-02-26nvme-pci: Fix nvme queue cleanup if IRQ setup failsJianchao Wang1-1/+4
This patch fixes nvme queue cleanup if requesting an IRQ handler for the queue's vector fails. It does this by resetting the cq_vector to the uninitialized value of -1 so it is ignored for a controller reset. Signed-off-by: Jianchao Wang <[email protected]> [changelog updates, removed misc whitespace changes] Signed-off-by: Keith Busch <[email protected]>
2018-02-25Linux 4.16-rc3Linus Torvalds1-1/+1
2018-02-25Merge tag 'xtensa-20180225' of git://github.com/jcmvbkbc/linux-xtensaLinus Torvalds2-17/+93
Pull Xtensa fixes from Max Filippov: "Two fixes for reserved memory/DMA buffers allocation in high memory on xtensa architecture - fix memory accounting when reserved memory is in high memory region - fix DMA allocation from high memory" * tag 'xtensa-20180225' of git://github.com/jcmvbkbc/linux-xtensa: xtensa: support DMA buffers in high memory xtensa: fix high memory/reserved memory collision
2018-02-25Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds6-22/+48
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A small set of fixes: - UAPI data type correction for hyperv - correct the cpu cores field in /proc/cpuinfo on CPU hotplug - return proper error code in the resctrl file system failure path to avoid silent subsequent failures - correct a subtle accounting issue in the new vector allocation code which went unnoticed for a while and caused suspend/resume failures" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/topology: Update the 'cpu cores' field in /proc/cpuinfo correctly across CPU hotplug operations x86/topology: Fix function name in documentation x86/intel_rdt: Fix incorrect returned value when creating rdgroup sub-directory in resctrl file system x86/apic/vector: Handle vector release on CPU unplug correctly genirq/matrix: Handle CPU offlining proper x86/headers/UAPI: Use __u64 instead of u64 in <uapi/asm/hyperv.h>
2018-02-25Merge branch 'perf-urgent-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull perf fix from Thomas Gleixner: "A single commit which shuts up a bogus GCC-8 warning" * 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/oprofile: Fix bogus GCC-8 warning in nmi_setup()
2018-02-25Merge branch 'locking-urgent-for-linus' of ↵Linus Torvalds3-18/+31
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull locking fixes from Thomas Gleixner: "Three patches to fix memory ordering issues on ALPHA and a comment to clarify the usage scope of a mutex internal function" * 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: locking/xchg/alpha: Fix xchg() and cmpxchg() memory ordering bugs locking/xchg/alpha: Clean up barrier usage by using smp_mb() in place of __ASM__MB locking/xchg/alpha: Add unconditional memory barrier to cmpxchg() locking/mutex: Add comment to __mutex_owner() to deter usage
2018-02-25Merge branch 'core-urgent-for-linus' of ↵Linus Torvalds17-19/+19
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull cleanup patchlet from Thomas Gleixner: "A single commit removing a bunch of bogus double semicolons all over the tree" * 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: treewide/trivial: Remove ';;$' typo noise
2018-02-25Merge tag 'nfs-for-4.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfsLinus Torvalds3-11/+11
Pull NFS client bugfixes from Trond Myklebust: - fix a broken cast in nfs4_callback_recallany() - fix an Oops during NFSv4 migration events - make struct nlmclnt_fl_close_lock_ops static * tag 'nfs-for-4.16-3' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: NFS: make struct nlmclnt_fl_close_lock_ops static nfs: system crashes after NFS4ERR_MOVED recovery NFSv4: Fix broken cast in nfs4_callback_recallany()
2018-02-25Bluetooth: hci_bcm: Make shutdown and device wake GPIO optionalStefan Wahren1-3/+4
According to the devicetree binding the shutdown and device wake GPIOs are optional. Since commit 3e81a4ca51a1 ("Bluetooth: hci_bcm: Mandate presence of shutdown and device wake GPIO") this driver won't probe anymore on Raspberry Pi 3 and Zero W (no device wake GPIO connected). So fix this regression by reverting this commit partially. Fixes: 3e81a4ca51a1 ("Bluetooth: hci_bcm: Mandate presence of shutdown and device wake GPIO") Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Lukas Wunner <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2018-02-25Bluetooth: btusb: Use DMI matching for QCA reset_resume quirkingHans de Goede1-6/+19
Commit 61f5acea8737 ("Bluetooth: btusb: Restore QCA Rome suspend/resume fix with a "rewritten" version") applied the USB_QUIRK_RESET_RESUME to all QCA USB Bluetooth modules. But it turns out that the resume problems are not caused by the QCA Rome chipset, on most platforms it resumes fine. The resume problems are actually a platform problem (likely the platform cutting all power when suspended). The USB_QUIRK_RESET_RESUME quirk also disables runtime suspend, so by matching on usb-ids, we're causing all boards with these chips to use extra power, to fix resume problems which only happen on some boards. This commit fixes this by applying the quirk based on DMI matching instead of on usb-ids, so that we match the platform and not the chipset. Here is the /sys/kernel/debug/usb/devices for the Bluetooth module: T: Bus=01 Lev=01 Prnt=01 Port=07 Cnt=04 Dev#= 5 Spd=12 MxCh= 0 D: Ver= 2.01 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=0cf3 ProdID=e300 Rev= 0.01 C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514836 Fixes: 61f5acea8737 ("Bluetooth: btusb: Restore QCA Rome suspend/resume..") Cc: [email protected] Cc: Brian Norris <[email protected]> Cc: Kai-Heng Feng <[email protected]> Reported-and-tested-by: Kevin Fenzi <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2018-02-25netfilter: use skb_to_full_sk in ip6_route_me_harderEric Dumazet1-4/+5
For some reason, Florian forgot to apply to ip6_route_me_harder the fix that went in commit 29e09229d9f2 ("netfilter: use skb_to_full_sk in ip_route_me_harder") Fixes: ca6fb0651883 ("tcp: attach SYNACK messages to request sockets instead of listener")  Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-02-25batman-adv: Fix internal interface indices typesSven Eckelmann5-21/+31
batman-adv uses internal indices for each enabled and active interface. It is currently used by the B.A.T.M.A.N. IV algorithm to identifify the correct position in the ogm_cnt bitmaps. The type for the number of enabled interfaces (which defines the next interface index) was set to char. This type can be (depending on the architecture) either signed (limiting batman-adv to 127 active slave interfaces) or unsigned (limiting batman-adv to 255 active slave interfaces). This limit was not correctly checked when an interface was enabled and thus an overflow happened. This was only catched on systems with the signed char type when the B.A.T.M.A.N. IV code tried to resize its counter arrays with a negative size. The if_num interface index was only a s16 and therefore significantly smaller than the ifindex (int) used by the code net code. Both &batadv_hard_iface->if_num and &batadv_priv->num_ifaces must be (unsigned) int to support the same number of slave interfaces as the net core code. And the interface activation code must check the number of active slave interfaces to avoid integer overflows. Fixes: c6c8fea29769 ("net: Add batman-adv meshing protocol") Signed-off-by: Sven Eckelmann <[email protected]> Signed-off-by: Simon Wunderlich <[email protected]>
2018-02-25netfilter: don't set F_IFACE on ipv6 fib lookupsFlorian Westphal2-14/+2
"fib" starts to behave strangely when an ipv6 default route is added - the FIB lookup returns a route using 'oif' in this case. This behaviour was inherited from ip6tables rpfilter so change this as well. Bugzilla: https://bugzilla.netfilter.org/show_bug.cgi?id=1221 Signed-off-by: Florian Westphal <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-02-25netfilter: increase IPSTATS_MIB_CSUMERRORS statTaehee Yoo1-1/+3
In the ip_rcv, IPSTATS_MIB_CSUMERRORS is increased when checksum error is occurred. bridge netfilter routine should increase IPSTATS_MIB_CSUMERRORS. Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2018-02-25batman-adv: Fix netlink dumping of BLA backbonesSven Eckelmann1-4/+7
The function batadv_bla_backbone_dump_bucket must be able to handle non-complete dumps of a single bucket. It tries to do that by saving the latest dumped index in *idx_skip to inform the caller about the current state. But the caller only assumes that buckets were not completely dumped when the return code is non-zero. This function must therefore also return a non-zero index when the dumping of an entry failed. Otherwise the caller will just skip all remaining buckets. And the function must also reset *idx_skip back to zero when it finished a bucket. Otherwise it will skip the same number of entries in the next bucket as the previous one had. Fixes: ea4152e11716 ("batman-adv: add backbone table netlink support") Reported-by: Linus Lüssing <[email protected]> Signed-off-by: Sven Eckelmann <[email protected]> Signed-off-by: Simon Wunderlich <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.