aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-02-28Merge tag 'devicetree-fixes-for-4.16' of ↵Linus Torvalds3-1/+26
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux Pull DeviceTree fixes from Rob Herring: - update i.MX thermal binding example to use current binding, not the deprecated one - move arm-charlcd to auxdisplay/ - fix misspelling of "debounce-interval" * tag 'devicetree-fixes-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: dt-bindings: power: Fix "debounce-interval" property misspelling auxdisplay: Move arm-charlcd binding to correct folder dt-bindings: thermal: imx: update the binding to new method
2018-02-28Merge branch 'mlxsw-fixes'David S. Miller6-55/+76
Jiri Pirko says: ==================== mlxsw: couple of fixes Couple of unrelated fixes for mlxsw. --- v1->v2: -patch 2: - rebase on top of current -net tree - removed forgotten empty line -patch 3: - new patch -patch 4: - new patch ==================== Signed-off-by: David S. Miller <[email protected]>
2018-02-28spectrum: Reference count VLAN entriesIdo Schimmel2-1/+8
One of the basic construct in the device is a port-VLAN pair, which can be bound to a FID or a RIF in order to direct packets to the bridge or the router, respectively. Since not all the netdevs are configured with a VLAN (e.g., sw1p1 vs. sw1p1.10), VID 1 is used to represent these and thus this VID can be used by both upper devices of mlxsw ports and by the driver itself. However, this VID is not reference counted and therefore might be freed prematurely, which can result in various WARNINGs. For example: $ ip link add name br0 type bridge vlan_filtering 1 $ teamd -t team0 -d -c '{"runner": {"name": "lacp"}}' $ ip link set dev team0 master br0 $ ip link set dev enp1s0np1 master team0 $ ip address add 192.0.2.1/24 dev enp1s0np1 The enslavement to team0 will fail because team0 already has an upper and thus vlan_vids_del_by_dev() will be executed as part of team's error path which will delete VID 1 from enp1s0np1 (added by br0 as PVID). The WARNING will be generated when the driver will realize it can't find VID 1 on the port and bind it to a RIF. Fix this by adding a reference count to the VLAN entries on the port, in a similar fashion to the reference counting used by the corresponding 'vlan_vid_info' structure in the 8021q driver. Fixes: c57529e1d5d8 ("mlxsw: spectrum: Replace vPorts with Port-VLAN") Reported-by: Tal Bar <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Tested-by: Tal Bar <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-28mlxsw: spectrum: Treat IPv6 unregistered multicast as broadcastIdo Schimmel1-1/+1
When multicast snooping is enabled, the Linux bridge resorts to flooding unregistered multicast packets to all ports only in case it did not detect a querier in the network. The above condition is not reflected to underlying drivers, which is especially problematic in IPv6 environments, as multicast snooping is enabled by default and since neighbour solicitation packets might be treated as unregistered multicast packets in case there is no corresponding MDB entry. Until the Linux bridge reflects its querier state to underlying drivers, simply treat unregistered multicast packets as broadcast and allow them to reach their destination. Fixes: 9df552ef3e21 ("mlxsw: spectrum: Improve IPv6 unregistered multicast flooding") Signed-off-by: Ido Schimmel <[email protected]> Reported-by: David Ahern <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-28mlxsw: spectrum: Fix handling of resource_size_paramJiri Pirko3-43/+57
Current code uses global variables, adjusts them and passes pointer down to devlink. With every other mlxsw_core instance, the previously passed pointer values are rewritten. Fix this by de-globalize the variables and also memcpy size_params during devlink resource registration. Also, introduce a convenient size_param_init helper. Fixes: ef3116e5403e ("mlxsw: spectrum: Register KVD resources with devlink") Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-28mlxsw: core: Fix flex keys scratchpad offset conflictJiri Pirko1-10/+10
IP_TTL, IP_ECN and IP_DSCP are using the same offset within the scratchpad as L4 ports. Fix this by shifting all up. Fixes: 5f57e0909136 ("mlxsw: acl: Add ip ttl acl element") Fixes: i80d0fe4710c ("mlxsw: acl: Add ip tos acl element") Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-28Merge branch 'net-smc-fixes'David S. Miller4-4/+7
Ursula Braun says: ==================== net/smc: fixes 2018-02-28 here are 3 smc bug fixes for the net-tree. Karsten's first patch is the reworked version of last week's "[PATCH net-next 2/5] net/smc: fix structure size" patch, now solved without using __packed, and now targetted for net instead of net-next. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-02-28net/smc: fix NULL pointer dereference on sock_create_kern() error pathDavide Caratti1-1/+3
when sock_create_kern(..., a) returns an error, 'a' might not be a valid pointer, so it shouldn't be dereferenced to read a->sk->sk_sndbuf and and a->sk->sk_rcvbuf; not doing that caused the following crash: general protection fault: 0000 [#1] SMP KASAN Dumping ftrace buffer: (ftrace buffer empty) Modules linked in: CPU: 0 PID: 4254 Comm: syzkaller919713 Not tainted 4.16.0-rc1+ #18 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:smc_create+0x14e/0x300 net/smc/af_smc.c:1410 RSP: 0018:ffff8801b06afbc8 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff8801b63457c0 RCX: ffffffff85a3e746 RDX: 0000000000000004 RSI: 00000000ffffffff RDI: 0000000000000020 RBP: ffff8801b06afbf0 R08: 00000000000007c0 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000 R13: ffff8801b6345c08 R14: 00000000ffffffe9 R15: ffffffff8695ced0 FS: 0000000001afb880(0000) GS:ffff8801db200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000020000040 CR3: 00000001b0721004 CR4: 00000000001606f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: __sock_create+0x4d4/0x850 net/socket.c:1285 sock_create net/socket.c:1325 [inline] SYSC_socketpair net/socket.c:1409 [inline] SyS_socketpair+0x1c0/0x6f0 net/socket.c:1366 do_syscall_64+0x282/0x940 arch/x86/entry/common.c:287 entry_SYSCALL_64_after_hwframe+0x26/0x9b RIP: 0033:0x4404b9 RSP: 002b:00007fff44ab6908 EFLAGS: 00000246 ORIG_RAX: 0000000000000035 RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00000000004404b9 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000000002b RBP: 00007fff44ab6910 R08: 0000000000000002 R09: 00007fff44003031 R10: 0000000020000040 R11: 0000000000000246 R12: ffffffffffffffff R13: 0000000000000006 R14: 0000000000000000 R15: 0000000000000000 Code: 48 c1 ea 03 80 3c 02 00 0f 85 b3 01 00 00 4c 8b a3 48 04 00 00 48 b8 00 00 00 00 00 fc ff df 49 8d 7c 24 20 48 89 fa 48 c1 ea 03 <80> 3c 02 00 0f 85 82 01 00 00 4d 8b 7c 24 20 48 b8 00 00 00 00 RIP: smc_create+0x14e/0x300 net/smc/af_smc.c:1410 RSP: ffff8801b06afbc8 Fixes: cd6851f30386 smc: remote memory buffers (RMBs) Reported-and-tested-by: [email protected] Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: Ursula Braun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-28net/smc: use link_id of server in confirm link replyKarsten Graul2-1/+2
The CONFIRM LINK reply message must contain the link_id sent by the server. And set the link_id explicitly when initializing the link. Signed-off-by: Karsten Graul <[email protected]> Signed-off-by: Ursula Braun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-28net/smc: use a constant for control message lengthKarsten Graul2-2/+2
The sizeof(struct smc_cdc_msg) evaluates to 48 bytes instead of the required 44 bytes. We need to use the constant value of SMC_WR_TX_SIZE to set and check the control message length. Signed-off-by: Karsten Graul <[email protected]> Signed-off-by: Ursula Braun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-28virtio-net: disable NAPI only when enabled during XDP setJason Wang1-3/+5
We try to disable NAPI to prevent a single XDP TX queue being used by multiple cpus. But we don't check if device is up (NAPI is enabled), this could result stall because of infinite wait in napi_disable(). Fixing this by checking device state through netif_running() before. Fixes: 4941d472bf95b ("virtio-net: do not reset during XDP set") Signed-off-by: Jason Wang <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-28x86/platform/intel-mid: Handle Intel Edison reboot correctlySebastian Panceac1-1/+1
When the Intel Edison module is powered with 3.3V, the reboot command makes the module stuck. If the module is powered at a greater voltage, like 4.4V (as the Edison Mini Breakout board does), reboot works OK. The official Intel Edison BSP sends the IPCMSG_COLD_RESET message to the SCU by default. The IPCMSG_COLD_BOOT which is used by the upstream kernel is only sent when explicitely selected on the kernel command line. Use IPCMSG_COLD_RESET unconditionally which makes reboot work independent of the power supply voltage. [ tglx: Massaged changelog ] Fixes: bda7b072de99 ("x86/platform/intel-mid: Implement power off sequence") Signed-off-by: Sebastian Panceac <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Andy Shevchenko <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-02-28nvmet: fix PSDT field check in command formatMax Gurtovoy1-3/+6
PSDT field section according to NVM_Express-1.3: "This field specifies whether PRPs or SGLs are used for any data transfer associated with the command. PRPs shall be used for all Admin commands for NVMe over PCIe. SGLs shall be used for all Admin and I/O commands for NVMe over Fabrics. This field shall be set to 01b for NVMe over Fabrics 1.0 implementations. Suggested-by: Idan Burstein <[email protected]> Signed-off-by: Max Gurtovoy <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2018-02-28net/tcp/illinois: replace broken algorithm reference linkJoey Pabalinas1-1/+1
The link to the pdf containing the algorithm description is now a dead link; it seems http://www.ifp.illinois.edu/~srikant/ has been moved to https://sites.google.com/a/illinois.edu/srikant/ and none of the original papers can be found there... I have replaced it with the only working copy I was able to find. n.b. there is also a copy available at: http://citeseerx.ist.psu.edu/viewdoc/download?doi=10.1.1.296.6350&rep=rep1&type=pdf However, this seems to only be a *cached* version, so I am unsure exactly how reliable that link can be expected to remain over time and have decided against using that one. Signed-off-by: Joey Pabalinas <[email protected]> 1 file changed, 1 insertion(+), 1 deletion(-) Signed-off-by: David S. Miller <[email protected]>
2018-02-28test_bpf: reduce MAX_TESTRUNSEric Dumazet1-1/+1
For tests that are using the maximal number of BPF instruction, each run takes 20 usec. Looping 10,000 times on them totals 200 ms, which is bad when the loop is not preemptible. test_bpf: #264 BPF_MAXINSNS: Call heavy transformations jited:1 19248 18548 PASS test_bpf: #269 BPF_MAXINSNS: ld_abs+get_processor_id jited:1 20896 PASS Lets divide by ten the number of iterations, so that max latency is 20ms. We could use need_resched() to break the loop earlier if we believe 20 ms is too much. Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-02-28tcp: purge write queue upon RSTSoheil Hassas Yeganeh1-0/+1
When the connection is reset, there is no point in keeping the packets on the write queue until the connection is closed. RFC 793 (page 70) and RFC 793-bis (page 64) both suggest purging the write queue upon RST: https://tools.ietf.org/html/draft-ietf-tcpm-rfc793bis-07 Moreover, this is essential for a correct MSG_ZEROCOPY implementation, because userspace cannot call close(fd) before receiving zerocopy signals even when the connection is reset. Fixes: f214f915e7db ("tcp: enable MSG_ZEROCOPY") Signed-off-by: Soheil Hassas Yeganeh <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Signed-off-by: Yuchung Cheng <[email protected]> Signed-off-by: Neal Cardwell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-28Merge branch 'tcp-revert-a-F-RTO-extension-due-to-broken-middle-boxes'David S. Miller1-16/+7
Yuchung Cheng says: ==================== tcp: revert a F-RTO extension due to broken middle-boxes This patch series reverts a (non-standard) TCP F-RTO extension that aimed to detect more spurious timeouts. Unfortunately it could result in poor performance due to broken middle-boxes that modify TCP packets. E.g. https://www.spinics.net/lists/netdev/msg484154.html We believe the best and simplest solution is to just revert the change. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-02-28tcp: revert F-RTO extension to detect more spurious timeoutsYuchung Cheng1-18/+12
This reverts commit 89fe18e44f7ee5ab1c90d0dff5835acee7751427. While the patch could detect more spurious timeouts, it could cause poor TCP performance on broken middle-boxes that modifies TCP packets (e.g. receive window, SACK options). Since the performance gain is much smaller compared to the potential loss. The best solution is to fully revert the change. Fixes: 89fe18e44f7e ("tcp: extend F-RTO to catch more spurious timeouts") Reported-by: Teodor Milkov <[email protected]> Signed-off-by: Yuchung Cheng <[email protected]> Signed-off-by: Neal Cardwell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-28tcp: revert F-RTO middle-box workaroundYuchung Cheng1-10/+7
This reverts commit cc663f4d4c97b7297fb45135ab23cfd508b35a77. While fixing some broken middle-boxes that modifies receive window fields, it does not address middle-boxes that strip off SACK options. The best solution is to fully revert this patch and the root F-RTO enhancement. Fixes: cc663f4d4c97 ("tcp: restrict F-RTO to work-around broken middle-boxes") Reported-by: Teodor Milkov <[email protected]> Signed-off-by: Yuchung Cheng <[email protected]> Signed-off-by: Neal Cardwell <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-28Merge branch 's390-qeth-fixes'David S. Miller3-84/+102
Julian Wiedmann says: ==================== s390/qeth: fixes 2018-02-27 please apply some more qeth patches for -net and stable. One patch fixes a performance bug in the TSO path. Then there's several more fixes for IP management on L3 devices - including a revert, so that the subsequent fix cleanly applies to earlier kernels. The final patch takes care of a race in the control IO code that causes qeth to miss the cmd response, and subsequently trigger device recovery. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-02-28s390/qeth: fix IPA command submission raceJulian Wiedmann1-9/+10
If multiple IPA commands are build & sent out concurrently, fill_ipacmd_header() may assign a seqno value to a command that's different from what send_control_data() later assigns to this command's reply. This is due to other commands passing through send_control_data(), and incrementing card->seqno.ipa along the way. So one IPA command has no reply that's waiting for its seqno, while some other IPA command has multiple reply objects waiting for it. Only one of those waiting replies wins, and the other(s) times out and triggers a recovery via send_ipa_cmd(). Fix this by making sure that the same seqno value is assigned to a command and its reply object. Do so immediately before submitting the command & while holding the irq_pending "lock", to produce nicely ascending seqnos. As a side effect, *all* IPA commands now use a reply object that's waiting for its actual seqno. Previously, early IPA commands that were submitted while the card was still DOWN used the "catch-all" IDX seqno. Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-28s390/qeth: fix IP address lookup for L3 devicesJulian Wiedmann2-51/+74
Current code ("qeth_l3_ip_from_hash()") matches a queried address object against objects in the IP table by IP address, Mask/Prefix Length and MAC address ("qeth_l3_ipaddrs_is_equal()"). But what callers actually require is either a) "is this IP address registered" (ie. match by IP address only), before adding a new address. b) or "is this address object registered" (ie. match all relevant attributes), before deleting an address. Right now 1. the ADD path is too strict in its lookup, and eg. doesn't detect conflicts between an existing NORMAL address and a new VIPA address (because the NORMAL address will have mask != 0, while VIPA has a mask == 0), 2. the DELETE path is not strict enough, and eg. allows del_rxip() to delete a VIPA address as long as the IP address matches. Fix all this by adding helpers (_addr_match_ip() and _addr_match_all()) that do the appropriate checking. Note that the ADD path for NORMAL addresses is special, as qeth keeps track of how many times such an address is in use (and there is no immediate way of returning errors to the caller). So when a requested NORMAL address _fully_ matches an existing one, it's not considered a conflict and we merely increment the refcount. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-28Revert "s390/qeth: fix using of ref counter for rxip addresses"Julian Wiedmann1-5/+3
This reverts commit cb816192d986f7596009dedcf2201fe2e5bc2aa7. The issue this attempted to fix never actually occurs. l3_add_rxip() checks (via l3_ip_from_hash()) if the requested address was previously added to the card. If so, it returns -EEXIST and doesn't call l3_add_ip(). As a result, the "address exists" path in l3_add_ip() is never taken for rxip addresses, and this patch had no effect. Fixes: cb816192d986 ("s390/qeth: fix using of ref counter for rxip addresses") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-28s390/qeth: fix double-free on IP add/remove raceJulian Wiedmann1-1/+2
Registering an IPv4 address with the HW takes quite a while, so we temporarily drop the ip_htable lock. Any concurrent add/remove of the same IP adjusts the IP's use count, and (on remove) is then blocked by addr->in_progress. After the register call has completed, we check the use count for concurrently attempted add/remove calls - and possibly straight-away deregister the IP again. This happens via l3_delete_ip(), which 1) looks up the queried IP in the htable (getting a reference to the *same* queried object), 2) deregisters the IP from the HW, and 3) frees the IP object. The caller in l3_add_ip() then does a second free on the same object. For this case, skip all the extra checks and lookups in l3_delete_ip() and just deregister & free the IP object ourselves. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-28s390/qeth: fix IP removal on offline cardsJulian Wiedmann1-11/+3
If the HW is not reachable, then none of the IPs in qeth's internal table has been registered with the HW yet. So when deleting such an IP, there's no need to stage it for deregistration - just drop it from the table. This fixes the "add-delete-add" scenario on an offline card, where the the second "add" merely increments the IP's use count. But as the IP is still set to DISP_ADDR_DELETE from the previous "delete" step, l3_recover_ip() won't register it with the HW when the card goes online. Fixes: 5f78e29ceebf ("qeth: optimize IP handling in rx_mode callback") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-28s390/qeth: fix overestimated count of buffer elementsJulian Wiedmann2-9/+12
qeth_get_elements_for_range() doesn't know how to handle a 0-length range (ie. start == end), and returns 1 when it should return 0. Such ranges occur on TSO skbs, where the L2/L3/L4 headers (and thus all of the skb's linear data) are skipped when mapping the skb into regular buffer elements. This overestimation may cause several performance-related issues: 1. sub-optimal IO buffer selection, where the next buffer gets selected even though the skb would actually still fit into the current buffer. 2. forced linearization, if the element count for a non-linear skb exceeds QETH_MAX_BUFFER_ELEMENTS. Rather than modifying qeth_get_elements_for_range() and adding overhead to every caller, fix up those callers that are in risk of passing a 0-length range. Fixes: 2863c61334aa ("qeth: refactor calculation of SBALE count") Signed-off-by: Julian Wiedmann <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-28gianfar: Fix Rx byte accounting for ndev statsClaudiu Manoil1-4/+3
Don't include in the Rx bytecount of the packet sent up the stack: the FCB (frame control block), and the padding bytes inserted by the controller into the frame payload, nor the FCS. All these are being pulled out of the skb by gfar_process_frame(). This issue is old, likely from the driver's beginnings, however it was amplified by recent: commit d903ec77118c ("gianfar: simplify FCS handling and fix memory leak") which basically added the FCS to the Rx bytecount, and so brought this to my attention. Signed-off-by: Claudiu Manoil <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-28objtool: Fix another switch table detection issueJosh Poimboeuf1-1/+5
Continue the switch table detection whack-a-mole. Add a check to distinguish KASAN data reads from switch data reads. The switch jump tables in .rodata have relocations associated with them. This fixes the following warning: crypto/asymmetric_keys/x509_cert_parser.o: warning: objtool: x509_note_pkey_algo()+0xa4: sibling call from callable instruction with modified stack frame Reported-by: Arnd Bergmann <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Arnd Bergmann <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lkml.kernel.org/r/d7c8853022ad47d158cb81e953a40469fc08a95e.1519784382.git.jpoimboe@redhat.com
2018-02-28x86/xen: Zero MSR_IA32_SPEC_CTRL before suspendJuergen Gross1-0/+16
Older Xen versions (4.5 and before) might have problems migrating pv guests with MSR_IA32_SPEC_CTRL having a non-zero value. So before suspending zero that MSR and restore it after being resumed. Signed-off-by: Juergen Gross <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Jan Beulich <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-02-28x86/asm: Add instruction suffixes to bitopsJan Beulich2-14/+17
Omitting suffixes from instructions in AT&T mode is bad practice when operand size cannot be determined by the assembler from register operands, and is likely going to be warned about by upstream gas in the future (mine does already). Add the missing suffixes here. Note that for 64-bit this means some operations change from being 32-bit to 64-bit. Signed-off-by: Jan Beulich <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-02-28x86/entry/64: Add instruction suffixJan Beulich1-1/+1
Omitting suffixes from instructions in AT&T mode is bad practice when operand size cannot be determined by the assembler from register operands, and is likely going to be warned about by upstream gas in the future (mine does already). Add the single missing suffix here. Signed-off-by: Jan Beulich <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-02-28x86/refcounts: Switch to UD2 for exceptionsKees Cook1-1/+1
As done in commit 3b3a371cc9bc ("x86/debug: Use UD2 for WARN()"), this switches to UD2 from UD0 to keep disassembly readable. Signed-off-by: Kees Cook <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lkml.kernel.org/r/20180225165056.GA11719@beast
2018-02-28clocksource/drivers/arc_timer: Update some commentsVineet Gupta1-3/+8
TIMER0 interrupt ACK is different for ARC700 and HS3x cores. This came to light in some internal discussions and it is nice to have this documented rather than digging up the PRM (Programmers Reference Manual). Signed-off-by: Vineet Gupta <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Daniel Lezcano <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-02-28clocksource/drivers/mips-gic-timer: Use correct shift count to extract dataFelix Fietkau1-1/+1
__gic_clocksource_init() extracts the GIC_CONFIG_COUNTBITS field from read_gic_config() by right shifting the register value. The shift count is determined by the most significant bit (__fls) of the bitmask which is wrong as it shifts out the complete bitfield. Use the least significant bit (__ffs) instead to shift the bitfield down to bit 0. Fixes: e07127a077c7 ("clocksource: mips-gic-timer: Use new GIC accessor functions") Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-02-28nvme-multipath: fix sysfs dangerously created linksBaegjae Sung2-14/+13
If multipathing is enabled, each NVMe subsystem creates a head namespace (e.g., nvme0n1) and multiple private namespaces (e.g., nvme0c0n1 and nvme0c1n1) in sysfs. When creating links for private namespaces, links of head namespace are used, so the namespace creation order must be followed (e.g., nvme0n1 -> nvme0c1n1). If the order is not followed, links of sysfs will be incomplete or kernel panic will occur. The kernel panic was: kernel BUG at fs/sysfs/symlink.c:27! Call Trace: nvme_mpath_add_disk_links+0x5d/0x80 [nvme_core] nvme_validate_ns+0x5c2/0x850 [nvme_core] nvme_scan_work+0x1af/0x2d0 [nvme_core] Correct order Context A Context B nvme0n1 nvme0c0n1 nvme0c1n1 Incorrect order Context A Context B nvme0c1n1 nvme0n1 nvme0c0n1 The nvme_mpath_add_disk (for creating head namespace) is called just before the nvme_mpath_add_disk_links (for creating private namespaces). In nvme_mpath_add_disk, the first context acquires the lock of subsystem and creates a head namespace, and other contexts do nothing by checking GENHD_FL_UP of a head namespace after waiting to acquire the lock. We verified the code with or without multipathing using three vendors of dual-port NVMe SSDs. Signed-off-by: Baegjae Sung <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Keith Busch <[email protected]>
2018-02-28dt-bindings: at24: sort manufacturers alphabeticallyPeter Rosin1-1/+1
Makes them easier to find. Signed-off-by: Peter Rosin <[email protected]> Acked-by: Rob Herring <[email protected]> Signed-off-by: Bartosz Golaszewski <[email protected]>
2018-02-28ALSA: x86: Fix potential crash at error pathTakashi Iwai1-10/+17
When LPE audio driver gets some error at probing, it may lead to a crash because of canceling the pending work in hdmi_lpe_audio_free(), since some of ports might be still not initialized. For assuring the proper free of each port, initialize all ports at the beginning of the probe. Fixes: b4eb0d522fcb ("ALSA: x86: Split snd_intelhad into card and PCM specific structures") Signed-off-by: Takashi Iwai <[email protected]>
2018-02-28ALSA: x86: Fix missing spinlock and mutex initializationsTakashi Iwai1-0/+2
The commit change for supporting the multiple ports moved involved some code shuffling, and there the initializations of spinlock and mutex in snd_intelhad object were dropped mistakenly. This patch adds the missing initializations again for each port. Fixes: b4eb0d522fcb ("ALSA: x86: Split snd_intelhad into card and PCM specific structures") Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-02-28ALSA: control: Fix memory corruption risk in snd_ctl_elem_readRichard Fitzgerald1-1/+1
The patch "ALSA: control: code refactoring for ELEM_READ/ELEM_WRITE operations" introduced a potential for kernel memory corruption due to an incorrect if statement allowing non-readable controls to fall through and call the get function. For TLV controls a driver can omit SNDRV_CTL_ELEM_ACCESS_READ to ensure that only the TLV get function can be called. Instead the normal get() can be invoked unexpectedly and as the driver expects that this will only be called for controls <= 512 bytes, potentially try to copy >512 bytes into the 512 byte return array, so corrupting kernel memory. The problem is an attempt to refactor the snd_ctl_elem_read function to invert the logic so that it conditionally aborted if the control is unreadable instead of conditionally executing. But the if statement wasn't inverted correctly. The correct inversion of if (a && !b) is if (!a || b) Fixes: becf9e5d553c2 ("ALSA: control: code refactoring for ELEM_READ/ELEM_WRITE operations") Signed-off-by: Richard Fitzgerald <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-02-28Merge branch 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie8-25/+24
into drm-fixes - Powerplay fixes for cards with no displays attached - Couple of DC fixes - radeon workaround for PPC64 * 'drm-fixes-4.16' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: insist on 32-bit DMA for Cedar on PPC64/PPC64LE drm/amd/display: VGA black screen from s3 when attached to hook drm/amdgpu: Unify the dm resume calls into one drm/amdgpu: Add a missing lock for drm_mm_takedown Revert "drm/radeon/pm: autoswitch power state when in balanced mode" drm/amd/powerplay/smu7: allow mclk switching with no displays drm/amd/powerplay/vega10: allow mclk switching with no displays
2018-02-27ARM: dts: bcm283x: Move arm-pmu out of soc nodeStefan Wahren2-8/+8
The ARM PMU doesn't have a reg address, so fix the following DTC warning (requires W=1): Node /soc/arm-pmu missing or empty reg/ranges property Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Eric Anholt <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2018-02-27ARM: dts: bcm283x: Fix unit address of local_intcStefan Wahren2-2/+2
This patch fixes the following DTC warning (requires W=1): Node /soc/local_intc simple-bus unit address format error, expected "40000000" Signed-off-by: Stefan Wahren <[email protected]> Reviewed-by: Eric Anholt <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2018-02-27ARM: dts: NSP: Fix amount of RAM on BCM958625HRFlorian Fainelli1-1/+1
Jon attempted to fix the amount of RAM on the BCM958625HR in commit c53beb47f621 ("ARM: dts: NSP: Correct RAM amount for BCM958625HR board") but it seems like we tripped over some poorly documented schematics. The top-level page of the schematics says the board has 2GB, but when you end-up scrolling to page 6, you see two chips of 4GBit (512MB) but what the bootloader really initializes only 512MB, any attempt to use more than that results in data aborts. Fix this again back to 512MB. Fixes: c53beb47f621 ("ARM: dts: NSP: Correct RAM amount for BCM958625HR board") Acked-by: Jon Mason <[email protected]> Signed-off-by: Florian Fainelli <[email protected]>
2018-02-27nbd: fix return value in error handling pathGustavo A. R. Silva1-1/+1
It seems that the proper value to return in this particular case is the one contained into variable new_index instead of ret. Addresses-Coverity-ID: 1465148 ("Copy-paste error") Fixes: e46c7287b1c2 ("nbd: add a basic netlink interface") Reviewed-by: Omar Sandoval <[email protected]> Signed-off-by: Gustavo A. R. Silva <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-02-27Merge branch 'fixes-v4.16-rc4' of ↵Linus Torvalds1-9/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull seccomp fix from James Morris: "This disables the seccomp samples when cross compiling. We've seen too many build issues here, so it's best to just disable it, especially since they're just the samples" * 'fixes-v4.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: samples/seccomp: do not compile when cross compiled
2018-02-27cdc_ether: flag the Cinterion PLS8 modem by gemalto as WWANBassem Boubaker1-0/+6
The Cinterion PL8 is an LTE modem with 2 possible WWAN interfaces. The modem is controlled via AT commands through the exposed TTYs. AT^SWWAN write command can be used to activate or deactivate a WWAN connection for a PDP context defined with AT+CGDCONT. UE supports two WWAN adapter. Both WWAN adapters can be activated a the same time Signed-off-by: Bassem Boubaker <[email protected]> Acked-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-27tls: Use correct sk->sk_prot for IPV6Boris Pismenny1-15/+37
The tls ulp overrides sk->prot with a new tls specific proto structs. The tls specific structs were previously based on the ipv4 specific tcp_prot sturct. As a result, attaching the tls ulp to an ipv6 tcp socket replaced some ipv6 callback with the ipv4 equivalents. This patch adds ipv6 tls proto structs and uses them when attached to ipv6 sockets. Fixes: 3c4d7559159b ('tls: kernel TLS support') Signed-off-by: Boris Pismenny <[email protected]> Signed-off-by: Ilya Lesokhin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-27sh_eth: uninline TSU register accessorsSergei Shtylyov2-11/+11
We have uninlined the sh_eth_{read|write}() functions introduced in the commit 4a55530f38e ("net: sh_eth: modify the definitions of register"). Now remove *inline* from sh_eth_tsu_{read|write}() as well and move these functions from the header to the driver itself. This saves 684 more bytes of object code (ARM gcc 4.8.5)... Signed-off-by: Sergei Shtylyov <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-02-27Merge branch 'tunnel-mtu-fixes'David S. Miller3-9/+15
Xin Long says: ==================== net: fix IFLA_MTU ignored on NEWLINK for some ip and ipv6 tunnels The fix for ip_gre follows the way other ip tunnels do: not to set mtu in ndo_init, as ip_tunnel_newlink will take care of it properly. The fix for ip6_tunnel and sit follows the way ipv6 tunenls do: to set mtu again according to IFLA_MTU after, as all bind_dev are called in ndo_init where it can't get the tb[IFLA_MTU]. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-02-27sit: fix IFLA_MTU ignored on NEWLINKXin Long1-0/+7
Commit 128bb975dc3c ("ip6_gre: init dev->mtu and dev->hard_header_len correctly") fixed IFLA_MTU ignored on NEWLINK for ip6_gre. The same mtu fix is also needed for sit. Note that dev->hard_header_len setting for sit works fine, no need to fix it. sit is actually ipv4 tunnel, it can't call ip6_tnl_change_mtu to set mtu. Reported-by: Jianlin Shi <[email protected]> Signed-off-by: Xin Long <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.