aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-03-05drm/i915: Suspend submission tasklets around wedgingChris Wilson2-1/+10
After staring hard at sequences like [ 28.199013] systemd-1 2..s. 26062228us : execlists_submission_tasklet: rcs0 cs-irq head=0 [0?], tail=1 [1?] [ 28.199095] systemd-1 2..s. 26062229us : execlists_submission_tasklet: rcs0 csb[1]: status=0x00000018:0x00000000, active=0x1 [ 28.199177] systemd-1 2..s. 26062230us : execlists_submission_tasklet: rcs0 out[0]: ctx=0.1, seqno=3, prio=-1024 [ 28.199258] systemd-1 2..s. 26062231us : execlists_submission_tasklet: rcs0 completed ctx=0 [ 28.199340] gem_eio-829 1..s1 26066853us : execlists_submission_tasklet: rcs0 in[0]: ctx=1.1, seqno=1, prio=0 [ 28.199421] <idle>-0 2..s. 26066863us : execlists_submission_tasklet: rcs0 cs-irq head=1 [1?], tail=2 [2?] [ 28.199503] <idle>-0 2..s. 26066865us : execlists_submission_tasklet: rcs0 csb[2]: status=0x00000001:0x00000000, active=0x1 [ 28.199585] gem_eio-829 1..s1 26067077us : execlists_submission_tasklet: rcs0 in[1]: ctx=3.1, seqno=2, prio=0 [ 28.199667] gem_eio-829 1..s1 26067078us : execlists_submission_tasklet: rcs0 in[0]: ctx=1.2, seqno=1, prio=0 [ 28.199749] <idle>-0 2..s. 26067084us : execlists_submission_tasklet: rcs0 cs-irq head=2 [2?], tail=3 [3?] [ 28.199830] <idle>-0 2..s. 26067085us : execlists_submission_tasklet: rcs0 csb[3]: status=0x00008002:0x00000001, active=0x1 [ 28.199912] <idle>-0 2..s. 26067086us : execlists_submission_tasklet: rcs0 out[0]: ctx=1.2, seqno=1, prio=0 [ 28.199994] gem_eio-829 2..s. 28246084us : execlists_submission_tasklet: rcs0 cs-irq head=3 [3?], tail=4 [4?] [ 28.200096] gem_eio-829 2..s. 28246088us : execlists_submission_tasklet: rcs0 csb[4]: status=0x00000014:0x00000001, active=0x5 [ 28.200178] gem_eio-829 2..s. 28246089us : execlists_submission_tasklet: rcs0 out[0]: ctx=0.0, seqno=0, prio=0 [ 28.200260] gem_eio-829 2..s. 28246127us : execlists_submission_tasklet: execlists_submission_tasklet:886 GEM_BUG_ON(buf[2 * head + 1] != port->context_id) the conclusion is that the only place where the ports are reset to zero, is from engine->cancel_requests called during i915_gem_set_wedged(). The race is horrible as it results from calling set-wedged on active HW (the GPU reset failed) and as such we need to be careful as the HW state changes beneath us. Fortunately, it's the same scary conditions as affect normal reset, so we can reuse the same machinery to disable state tracking as we clobber it. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104945 Signed-off-by: Chris Wilson <[email protected]> Cc: Mika Kuoppala <[email protected]> Cc: Michel Thierry <[email protected]> Fixes: af7a8ffad9c5 ("drm/i915: Use rcu instead of stop_machine in set_wedged") Reviewed-by: Mika Kuoppala <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 963ddd63c314e9b5d9cd999873d473a93aed5380) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-03-05drm/i915/perf: fix perf stream opening lockLionel Landwerlin1-27/+13
We're seeing on CI that some contexts don't have the programmed OA period timer that directs the OA unit on how often to write reports. The issue is that we're not holding the drm lock from when we edit the context images down to when we set the exclusive_stream variable. This leaves a window for the deferred context allocation to call i915_oa_init_reg_state() that will not program the expected OA timer value, because we haven't set the exclusive_stream yet. v2: Drop need_lock from gen8_configure_all_contexts() (Matt) Signed-off-by: Lionel Landwerlin <[email protected]> Reviewed-by: Matthew Auld <[email protected]> Reviewed-by: Chris Wilson <[email protected]> Fixes: 701f8231a2f ("drm/i915/perf: prune OA configs") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102254 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103715 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103755 Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Cc: Jani Nikula <[email protected]> Cc: Joonas Lahtinen <[email protected]> Cc: Rodrigo Vivi <[email protected]> Cc: [email protected] Cc: <[email protected]> # v4.14+ (cherry picked from commit 41d3fdcd15d5ecf29cc73e8b79c2327ebb54b960) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-03-05PCI: Move of_irq_parse_and_map_pci() declaration under OF_IRQGuenter Roeck1-7/+10
Since commit 4670d610d592 ("PCI: Move OF-related PCI functions into PCI core"), sparc:allmodconfig fails to build with the following error. pcie-cadence-host.c:(.text+0x4c4): undefined reference to `of_irq_parse_and_map_pci' pcie-cadence-host.c:(.text+0x4c8): undefined reference to `of_irq_parse_and_map_pci' of_irq_parse_and_map_pci() is now only available if OF_IRQ is enabled. Make its declaration and its dummy function dependent on OF_IRQ to solve the problem. Fixes: 4670d610d592 ("PCI: Move OF-related PCI functions into PCI core") Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]> Acked-by: Rob Herring <[email protected]>
2018-03-05MIPS: BMIPS: Do not mask IPIs during suspendJustin Chen1-4/+4
Commit a3e6c1eff548 ("MIPS: IRQ: Fix disable_irq on CPU IRQs") fixes an issue where disable_irq did not actually disable the irq. The bug caused our IPIs to not be disabled, which actually is the correct behavior. With the addition of commit a3e6c1eff548 ("MIPS: IRQ: Fix disable_irq on CPU IRQs"), the IPIs were getting disabled going into suspend, thus schedule_ipi() was not being called. This caused deadlocks where schedulable task were not being scheduled and other cpus were waiting for them to do something. Add the IRQF_NO_SUSPEND flag so an irq_disable will not be called on the IPIs during suspend. Signed-off-by: Justin Chen <[email protected]> Fixes: a3e6c1eff548 ("MIPS: IRQ: Fix disabled_irq on CPU IRQs") Cc: Florian Fainelli <[email protected]> Cc: [email protected] Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/17385/ [[email protected]: checkpatch: wrap long lines and fix commit refs] Signed-off-by: James Hogan <[email protected]>
2018-03-05ia64/err-inject: fix spelling mistake: "capapbilities" -> "capabilities"Colin Ian King1-1/+1
Trivial fix to spelling mistake in debug message text. Signed-off-by: Colin Ian King <[email protected]> Signed-off-by: Tony Luck <[email protected]>
2018-03-05ia64/err-inject: Use get_user_pages_fast()Davidlohr Bueso1-1/+1
At the point of sysfs callback, the call to gup is done without mmap_sem (or any lock for that matter). This is racy. As such, use the get_user_pages_fast() alternative and safely avoid taking the lock, if possible. Signed-off-by: Davidlohr Bueso <[email protected]> Signed-off-by: Tony Luck <[email protected]>
2018-03-05ia64: doc: tweak whitespace for 'console=' parameterSergei Trofimovich1-1/+1
CC: Tony Luck <[email protected]> CC: Fenghua Yu <[email protected]> CC: [email protected] CC: [email protected] Signed-off-by: Sergei Trofimovich <[email protected]> Signed-off-by: Tony Luck <[email protected]>
2018-03-05ia64: Convert remaining atomic operationsMatthew Wilcox1-46/+23
While we've only seen inlining problems with atomic_sub_return(), the other atomic operations could have the same problem. Convert all remaining operations to use the same solution as atomic_sub_return(). Signed-off-by: Matthew Wilcox <[email protected]> Signed-off-by: Tony Luck <[email protected]>
2018-03-05ia64: convert unwcheck.py to python3Corentin Labbe1-8/+8
Since my system use python3 as default, arch/ia64/scripts/unwcheck.py no longer run. This patch convert it to the python3 syntax. I have ran it with python2/python3 while printing values of start/end/rlen_sum which could be impacted by this change and I see no difference. Fixes: 94a47083522e ("scripts: change scripts to use system python instead of env") Signed-off-by: Corentin Labbe <[email protected]> Signed-off-by: Tony Luck <[email protected]>
2018-03-05bcache: don't attach backing with duplicate UUIDMichael Lyle1-0/+11
This can happen e.g. during disk cloning. This is an incomplete fix: it does not catch duplicate UUIDs earlier when things are still unattached. It does not unregister the device. Further changes to cope better with this are planned but conflict with Coly's ongoing improvements to handling device errors. In the meantime, one can manually stop the device after this has happened. Attempts to attach a duplicate device result in: [ 136.372404] loop: module loaded [ 136.424461] bcache: register_bdev() registered backing device loop0 [ 136.424464] bcache: bch_cached_dev_attach() Tried to attach loop0 but duplicate UUID already attached My test procedure is: dd if=/dev/sdb1 of=imgfile bs=1024 count=262144 losetup -f imgfile Signed-off-by: Michael Lyle <[email protected]> Reviewed-by: Tang Junhui <[email protected]> Cc: <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-03-05bcache: fix crashes in duplicate cache device registerTang Junhui1-6/+10
Kernel crashed when register a duplicate cache device, the call trace is bellow: [ 417.643790] CPU: 1 PID: 16886 Comm: bcache-register Tainted: G W OE 4.15.5-amd64-preempt-sysrq-20171018 #2 [ 417.643861] Hardware name: LENOVO 20ERCTO1WW/20ERCTO1WW, BIOS N1DET41W (1.15 ) 12/31/2015 [ 417.643870] RIP: 0010:bdevname+0x13/0x1e [ 417.643876] RSP: 0018:ffffa3aa9138fd38 EFLAGS: 00010282 [ 417.643884] RAX: 0000000000000000 RBX: ffff8c8f2f2f8000 RCX: ffffd6701f8 c7edf [ 417.643890] RDX: ffffa3aa9138fd88 RSI: ffffa3aa9138fd88 RDI: 00000000000 00000 [ 417.643895] RBP: ffffa3aa9138fde0 R08: ffffa3aa9138fae8 R09: 00000000000 1850e [ 417.643901] R10: ffff8c8eed34b271 R11: ffff8c8eed34b250 R12: 00000000000 00000 [ 417.643906] R13: ffffd6701f78f940 R14: ffff8c8f38f80000 R15: ffff8c8ea7d 90000 [ 417.643913] FS: 00007fde7e66f500(0000) GS:ffff8c8f61440000(0000) knlGS: 0000000000000000 [ 417.643919] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 417.643925] CR2: 0000000000000314 CR3: 00000007e6fa0001 CR4: 00000000003 606e0 [ 417.643931] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 00000000000 00000 [ 417.643938] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 00000000000 00400 [ 417.643946] Call Trace: [ 417.643978] register_bcache+0x1117/0x1270 [bcache] [ 417.643994] ? slab_pre_alloc_hook+0x15/0x3c [ 417.644001] ? slab_post_alloc_hook.isra.44+0xa/0x1a [ 417.644013] ? kernfs_fop_write+0xf6/0x138 [ 417.644020] kernfs_fop_write+0xf6/0x138 [ 417.644031] __vfs_write+0x31/0xcc [ 417.644043] ? current_kernel_time64+0x10/0x36 [ 417.644115] ? __audit_syscall_entry+0xbf/0xe3 [ 417.644124] vfs_write+0xa5/0xe2 [ 417.644133] SyS_write+0x5c/0x9f [ 417.644144] do_syscall_64+0x72/0x81 [ 417.644161] entry_SYSCALL_64_after_hwframe+0x3d/0xa2 [ 417.644169] RIP: 0033:0x7fde7e1c1974 [ 417.644175] RSP: 002b:00007fff13009a38 EFLAGS: 00000246 ORIG_RAX: 0000000 000000001 [ 417.644183] RAX: ffffffffffffffda RBX: 0000000001658280 RCX: 00007fde7e1c 1974 [ 417.644188] RDX: 000000000000000a RSI: 0000000001658280 RDI: 000000000000 0001 [ 417.644193] RBP: 000000000000000a R08: 0000000000000003 R09: 000000000000 0077 [ 417.644198] R10: 000000000000089e R11: 0000000000000246 R12: 000000000000 0001 [ 417.644203] R13: 000000000000000a R14: 7fffffffffffffff R15: 000000000000 0000 [ 417.644213] Code: c7 c2 83 6f ee 98 be 20 00 00 00 48 89 df e8 6c 27 3b 0 0 48 89 d8 5b c3 0f 1f 44 00 00 48 8b 47 70 48 89 f2 48 8b bf 80 00 00 00 <8 b> b0 14 03 00 00 e9 73 ff ff ff 0f 1f 44 00 00 48 8b 47 40 39 [ 417.644302] RIP: bdevname+0x13/0x1e RSP: ffffa3aa9138fd38 [ 417.644306] CR2: 0000000000000314 When registering duplicate cache device in register_cache(), after failure on calling register_cache_set(), bch_cache_release() will be called, then bdev will be freed, so bdevname(bdev, name) caused kernel crash. Since bch_cache_release() will free bdev, so in this patch we make sure bdev being freed if register_cache() fail, and do not free bdev again in register_bcache() when register_cache() fail. Signed-off-by: Tang Junhui <[email protected]> Reported-by: Marc MERLIN <[email protected]> Tested-by: Michael Lyle <[email protected]> Reviewed-by: Michael Lyle <[email protected]> Cc: <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2018-03-05drm/amd/display: Fix active dongle hotplugRoman Li1-0/+4
Clean fake sink flag after detecting link on downstream port. Fixing display light-up after "hot-unplug&plug again" downstream of an active dongle. Signed-off-by: Roman Li <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-05drm/amdgpu: used cached pcie gen info for SI (v2)Alex Deucher2-49/+23
Rather than querying it every time we need it. Also fixes a crash in VM pass through if there is no root bridge because the cached value fetch already checks this properly. v2: fix includes Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=105244 Acked-by: Christian König <[email protected]> Reviewed-by: Rex Zhu<[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-03-05drm/amd/amdgpu: Mask rptr as well in ring debugfsTom St Denis1-1/+1
The read/write pointers on sdma4 devices increment beyond the ring size and should be masked. Tested on my Ryzen 2400G. Signed-off-by: Tom St Denis <[email protected]> Reviewed-by: Alex Deucher <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-05Merge tag 'linux-kselftest-4.16-rc5' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest Pull kselftest fixes from Shuah Khan: "A fix for regression in memory-hotplug install script that prevents the test from running on the target" * tag 'linux-kselftest-4.16-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest: selftests: memory-hotplug: fix emit_tests regression
2018-03-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds95-658/+1033
Pull networking fixes from David Miller: 1) Use an appropriate TSQ pacing shift in mac80211, from Toke Høiland-Jørgensen. 2) Just like ipv4's ip_route_me_harder(), we have to use skb_to_full_sk in ip6_route_me_harder, from Eric Dumazet. 3) Fix several shutdown races and similar other problems in l2tp, from James Chapman. 4) Handle missing XDP flush properly in tuntap, for real this time. From Jason Wang. 5) Out-of-bounds access in powerpc ebpf tailcalls, from Daniel Borkmann. 6) Fix phy_resume() locking, from Andrew Lunn. 7) IFLA_MTU values are ignored on newlink for some tunnel types, fix from Xin Long. 8) Revert F-RTO middle box workarounds, they only handle one dimension of the problem. From Yuchung Cheng. 9) Fix socket refcounting in RDS, from Ka-Cheong Poon. 10) Don't allow ppp unit registration to an unregistered channel, from Guillaume Nault. 11) Various hv_netvsc fixes from Stephen Hemminger. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (98 commits) hv_netvsc: propagate rx filters to VF hv_netvsc: filter multicast/broadcast hv_netvsc: defer queue selection to VF hv_netvsc: use napi_schedule_irqoff hv_netvsc: fix race in napi poll when rescheduling hv_netvsc: cancel subchannel setup before halting device hv_netvsc: fix error unwind handling if vmbus_open fails hv_netvsc: only wake transmit queue if link is up hv_netvsc: avoid retry on send during shutdown virtio-net: re enable XDP_REDIRECT for mergeable buffer ppp: prevent unregistered channels from connecting to PPP units tc-testing: skbmod: fix match value of ethertype mlxsw: spectrum_switchdev: Check success of FDB add operation net: make skb_gso_*_seglen functions private net: xfrm: use skb_gso_validate_network_len() to check gso sizes net: sched: tbf: handle GSO_BY_FRAGS case in enqueue net: rename skb_gso_validate_mtu -> skb_gso_validate_network_len rds: Incorrect reference counting in TCP socket creation net: ethtool: don't ignore return from driver get_fecparam method vrf: check forwarding on the original netdevice when generating ICMP dest unreachable ...
2018-03-05tools headers: Sync x86's cpufeatures.hArnaldo Carvalho de Melo1-0/+1
The changes in dd84441a7971 ("x86/speculation: Use IBRS if available before calling into firmware") don't need any kind of special treatment in the current tools/perf/ codebase, so just update the copy to get rid of the perf build warning: BUILD: Doing 'make -j4' parallel build Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h' Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: David Woodhouse <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-05tools headers: Sync copy of kvm UAPI headersArnaldo Carvalho de Melo1-0/+2
In 801e459a6f3a ("KVM: x86: Add a framework for supporting MSR-based features") a new ioctl was introduced, which with this sync of the kvm UAPI headers, makes 'perf trace' know about it: $ cd /tmp/build/perf/trace/beauty/generated/ioctl/ $ diff -u kvm_ioctl_array.c.old kvm_ioctl_array.c --- /tmp/kvm_ioctl_array.c 2018-03-05 11:55:38.409145056 -0300 +++ /tmp/build/perf/trace/beauty/generated/ioctl/kvm_ioctl_array.c 2018-03-05 11:56:17.456153501 -0300 @@ -6,6 +6,7 @@ [0x04] = "GET_VCPU_MMAP_SIZE", [0x05] = "GET_SUPPORTED_CPUID", [0x09] = "GET_EMULATED_CPUID", + [0x0a] = "GET_MSR_FEATURE_INDEX_LIST", [0x40] = "SET_MEMORY_REGION", [0x41] = "CREATE_VCPU", [0x42] = "GET_DIRTY_LOG", So when using 'perf trace -e ioctl' that will appear along with the others, like in this excerpt of a system wide session: 14.556 ( 0.006 ms): CPU 0/KVM/16077 ioctl(fd: 19<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0 14.565 ( 0.006 ms): CPU 0/KVM/16077 ioctl(fd: 19<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) = 0 14.573 ( ): CPU 0/KVM/16077 ioctl(fd: 19<anon_inode:kvm-vcpu:0>, cmd: KVM_RUN) ... 34.075 ( 0.016 ms): gnome-shell/2192 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7ffe4e73e850) = 0 40.549 ( 0.012 ms): gnome-shell/2192 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7ffe4e73ece0) = 0 40.625 ( 0.005 ms): gnome-shell/2192 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_BUSY, arg: 0x7ffe4e73e940) = 0 40.632 ( 0.003 ms): gnome-shell/2192 ioctl(fd: 8</dev/dri/card0>, cmd: DRM_I915_GEM_MADVISE, arg: 0x7ffe4e73e9b0) = 0 This also silences the perf build header copy drift verifier: make: Entering directory '/home/acme/git/perf/tools/perf' BUILD: Doing 'make -j4' parallel build Warning: Kernel ABI header at 'tools/include/uapi/linux/kvm.h' differs from latest version at 'include/uapi/linux/kvm.h' Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Radim Krčmář <[email protected]> Cc: Tom Lendacky <[email protected]> Cc: Wang Nan <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-05perf record: Fix crash in pipe modeJiri Olsa3-2/+16
Currently we can crash perf record when running in pipe mode, like: $ perf record ls | perf report # To display the perf.data header info, please use --header/--header-only options. # perf: Segmentation fault Error: The - file has no samples! The callstack of the crash is: 0x0000000000515242 in perf_event__synthesize_event_update_name 3513 ev = event_update_event__new(len + 1, PERF_EVENT_UPDATE__NAME, evsel->id[0]); (gdb) bt #0 0x0000000000515242 in perf_event__synthesize_event_update_name #1 0x00000000005158a4 in perf_event__synthesize_extra_attr #2 0x0000000000443347 in record__synthesize #3 0x00000000004438e3 in __cmd_record #4 0x000000000044514e in cmd_record #5 0x00000000004cbc95 in run_builtin #6 0x00000000004cbf02 in handle_internal_command #7 0x00000000004cc054 in run_argv #8 0x00000000004cc422 in main The reason of the crash is that the evsel does not have ids array allocated and the pipe's synthesize code tries to access it. We don't force evsel ids allocation when we have single event, because it's not needed. However we need it when we are in pipe mode even for single event as a key for evsel update event. Fixing this by forcing evsel ids allocation event for single event, when we are in pipe mode. Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-05perf annotate browser: Be more robust when drawing jump arrowsArnaldo Carvalho de Melo1-0/+25
This first happened with a gcc function, _cpp_lex_token, that has the usual jumps: │1159e6c: ↓ jne 115aa32 <_cpp_lex_token@@Base+0xf92> I.e. jumps to a label inside that function (_cpp_lex_token), and those works, but also this kind: │1159e8b: ↓ jne c469be <cpp_named_operator2name@@Base+0xa72> I.e. jumps to another function, outside _cpp_lex_token, which are not being correctly handled generating as a side effect references to ab->offset[] entries that are set to NULL, so to make this code more robust, check that here. A proper fix for will be put in place, looking at the function name right after the '<' token and probably treating this like a 'call' instruction. For now just don't draw the arrow. Reported-by: Ingo Molnar <[email protected]> Tested-by: Ingo Molnar <[email protected]> Reported-by: Linus Torvalds <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Cc: Jin Yao <[email protected]> Cc: Kan Liang <[email protected]> Link: https://lkml.kernel.org/n/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-05perf top: Fix annoying fallback message on older kernelsKan Liang1-1/+1
On older (e.g. v4.4) kernels, an annoying fallback message can be observed in 'perf top': ┌─Warning:──────────────────────┐ │fall back to non-overwrite mode│ │ │ │ │ │Press any key... │ └───────────────────────────────┘ The 'perf top' utility has been changed to overwrite mode since commit ebebbf082357 ("perf top: Switch default mode to overwrite mode"). For older kernels which don't have overwrite mode support, 'perf top' will fall back to non-overwrite mode and print out the fallback message using ui__warning(), which needs user's input to close. The fallback message is not critical for end users. Turning it to debug message which is printed when running with -vv. Reported-by: Ingo Molnar <[email protected]> Signed-off-by: Kan Liang <[email protected]> Cc: Kan Liang <[email protected]> Fixes: ebebbf082357 ("perf top: Switch default mode to overwrite mode") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-05perf kallsyms: Fix the usage on the man pageSangwon Hong1-1/+1
First, all man pages highlight only perf and subcommands except 'perf kallsyms', which includes the full usage. Fix it for commands to monopolize underlines. Second, options can be ommited when executing 'perf kallsyms', so add square brackets between <option>. Signed-off-by: Sangwon Hong <[email protected]> Acked-by: Namhyung Kim <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Taeung Song <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-05fixdep: do not ignore kconfig.hRasmus Villemoes1-1/+0
kconfig.h was excluded from consideration by fixdep by 6a5be57f0f00 (fixdep: fix extraneous dependencies) to avoid some false positive hits (1) include/config/.h (2) include/config/h.h (3) include/config/foo.h (1) occurred because kconfig.h contains the string CONFIG_ in a comment. However, since dee81e988674 (fixdep: faster CONFIG_ search), we have a check that the part after CONFIG_ is non-empty, so this does not happen anymore (and CONFIG_ appears by itself elsewhere, so that check is worthwhile). (2) comes from the include guard, __LINUX_KCONFIG_H. But with the previous patch, we no longer match that either. That leaves (3), which amounts to one [1] false dependency (aka stat() call done by make), which I think we can live with: We've already had one case [2] where the lack of include/linux/kconfig.h in the .o.cmd file caused a missing rebuild, and while I originally thought we should just put kconfig.h in the dependency list without parsing it for the CONFIG_ pattern, we actually do have some real CONFIG_ symbols mentioned in it, and one can imagine some translation unit that just does '#ifdef __BIG_ENDIAN' but doesn't through some other header actually depend on CONFIG_CPU_BIG_ENDIAN - so changing the target endianness could end up rebuilding the world, minus that small TU. Quoting Linus, ... when missing dependencies cause a missed re-compile, the resulting bugs can be _really_ subtle. [1] well, two, we now also have CONFIG_BOOGER/booger.h - we could change that to FOO if we care [2] https://lkml.org/lkml/2018/2/22/838 Cc: Linus Torvalds <[email protected]> Signed-off-by: Rasmus Villemoes <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-03-05fixdep: remove some false CONFIG_ matchesRasmus Villemoes1-0/+5
The string CONFIG_ quite often appears after other alphanumerics, meaning that that instance cannot be referencing a Kconfig symbol. Omitting these means make has fewer files to stat() when deciding what needs to be rebuilt - for a defconfig build, this seems to remove about 2% of the (wildcard ...) lines from the .o.cmd files. Signed-off-by: Rasmus Villemoes <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-03-05fixdep: remove stale references to uml-config.hRasmus Villemoes1-9/+0
uml-config.h hasn't existed in this decade (87e299e5c750 - x86, um: get rid of uml-config.h). The few remaining UML_CONFIG instances are defined directly in terms of their real CONFIG symbol in common-offsets.h, so unlike when the symbols got defined via a sed script, anything that uses UML_CONFIG_FOO now should also automatically pick up a dependency on CONFIG_FOO via the normal fixdep mechanism (since common-offsets.h should at least recursively be a dependency). Hence I believe we should actually be able to ignore the HELLO_CONFIG_BOOM cases. Cc: Al Viro <[email protected]> Cc: Richard Weinberger <[email protected]> Cc: [email protected] Signed-off-by: Rasmus Villemoes <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-03-05MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_SERIOHuacai Chen1-0/+3
Commit 7a407aa5e0d3 ("MIPS: Push ARCH_MIGHT_HAVE_PC_SERIO down to platform level") moves the global MIPS ARCH_MIGHT_HAVE_PC_SERIO select down to various platforms, but doesn't add it to Loongson64 platforms which need it, so add the selects to these platforms too. Fixes: 7a407aa5e0d3 ("MIPS: Push ARCH_MIGHT_HAVE_PC_SERIO down to platform level") Signed-off-by: Huacai Chen <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/18704/ Signed-off-by: James Hogan <[email protected]>
2018-03-05MIPS: Loongson64: Select ARCH_MIGHT_HAVE_PC_PARPORTHuacai Chen1-0/+3
Commit a211a0820d3c ("MIPS: Push ARCH_MIGHT_HAVE_PC_PARPORT down to platform level") moves the global MIPS ARCH_MIGHT_HAVE_PC_PARPORT select down to various platforms, but doesn't add it to Loongson64 platforms which need it, so add the selects to these platforms too. Fixes: a211a0820d3c ("MIPS: Push ARCH_MIGHT_HAVE_PC_PARPORT down to platform level") Signed-off-by: Huacai Chen <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: [email protected] Patchwork: https://patchwork.linux-mips.org/patch/18703/ Signed-off-by: James Hogan <[email protected]>
2018-03-05gpio: rcar: Use wakeup_path i.s.o. explicit clock handlingGeert Uytterhoeven1-22/+16
Since commit ab82fa7da4dce5c7 ("gpio: rcar: Prevent module clock disable when wake-up is enabled"), when a GPIO is used for wakeup, the GPIO block's module clock (if exists) is manually kept running during system suspend, to make sure the device stays active. However, this explicit clock handling is merely a workaround for a failure to properly communicate wakeup information to the device core. Instead, set the device's power.wakeup_path field, to indicate this device is part of the wakeup path. Depending on the PM Domain's active_wakeup configuration, the genpd core code will keep the device enabled (and the clock running) during system suspend when needed. This allows for the removal of all explicit clock handling code from the driver. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Linus Walleij <[email protected]>
2018-03-04Merge branch 'hv_netvsc-minor-fixes'David S. Miller3-39/+79
Stephen Hemminger says: ==================== hv_netvsc: minor fixes These are improvements to netvsc driver. They aren't functionality changes so not targeting net-next; and they are not show stopper bugs that need to go to stable either. v2 - drop the irq flags patch, defer it to net-next - split the multicast filter flag patch out - change propogate rx mode patch to handle startup of vf ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-04hv_netvsc: propagate rx filters to VFStephen Hemminger1-4/+36
The netvsc device should propagate filters to the SR-IOV VF device (if present). The flags also need to be propagated to the VF device as well. This only really matters on local Hyper-V since Azure does not support multiple addresses. Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-04hv_netvsc: filter multicast/broadcastStephen Hemminger1-8/+12
The netvsc driver was always enabling all multicast and broadcast even if netdevice flag had not enabled it. Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-04hv_netvsc: defer queue selection to VFStephen Hemminger1-2/+13
When VF is used for accelerated networking it will likely have more queues (and different policy) than the synthetic NIC. This patch defers the queue policy to the VF so that all the queues can be used. This impacts workloads like local generate UDP. Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-04hv_netvsc: use napi_schedule_irqoffStephen Hemminger1-1/+1
Since the netvsc_channel_cb is already called in interrupt context from vmbus, there is no need to do irqsave/restore. Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-04hv_netvsc: fix race in napi poll when reschedulingStephen Hemminger1-2/+3
There is a race between napi_reschedule and re-enabling interrupts which could lead to missed host interrrupts. This occurs when interrupts are re-enabled (hv_end_read) and vmbus irq callback (netvsc_channel_cb) has already scheduled NAPI. Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-04hv_netvsc: cancel subchannel setup before halting deviceStephen Hemminger1-0/+3
Block setup of multiple channels earlier in the teardown process. This avoids possible races between halt and subchannel initialization. Suggested-by: Haiyang Zhang <[email protected]> Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-04hv_netvsc: fix error unwind handling if vmbus_open failsStephen Hemminger1-1/+1
Need to delete NAPI association if vmbus_open fails. Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-04hv_netvsc: only wake transmit queue if link is upStephen Hemminger1-4/+3
Don't wake transmit queues if link is not up yet. Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-04hv_netvsc: avoid retry on send during shutdownStephen Hemminger1-17/+7
Change the initialization order so that the device is ready to transmit (ie connect vsp is completed) before setting the internal reference to the device with RCU. This avoids any races on initialization and prevents retry issues on shutdown. Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-04virtio-net: re enable XDP_REDIRECT for mergeable bufferJason Wang1-12/+42
XDP_REDIRECT support for mergeable buffer was removed since commit 7324f5399b06 ("virtio_net: disable XDP_REDIRECT in receive_mergeable() case"). This is because we don't reserve enough tailroom for struct skb_shared_info which breaks XDP assumption. So this patch fixes this by reserving enough tailroom and using fixed size of rx buffer. Signed-off-by: Jason Wang <[email protected]> Acked-by: Jesper Dangaard Brouer <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-04ppp: prevent unregistered channels from connecting to PPP unitsGuillaume Nault1-0/+9
PPP units don't hold any reference on the channels connected to it. It is the channel's responsibility to ensure that it disconnects from its unit before being destroyed. In practice, this is ensured by ppp_unregister_channel() disconnecting the channel from the unit before dropping a reference on the channel. However, it is possible for an unregistered channel to connect to a PPP unit: register a channel with ppp_register_net_channel(), attach a /dev/ppp file to it with ioctl(PPPIOCATTCHAN), unregister the channel with ppp_unregister_channel() and finally connect the /dev/ppp file to a PPP unit with ioctl(PPPIOCCONNECT). Once in this situation, the channel is only held by the /dev/ppp file, which can be released at anytime and free the channel without letting the parent PPP unit know. Then the ppp structure ends up with dangling pointers in its ->channels list. Prevent this scenario by forbidding unregistered channels from connecting to PPP units. This maintains the code logic by keeping ppp_unregister_channel() responsible from disconnecting the channel if necessary and avoids modification on the reference counting mechanism. This issue seems to predate git history (successfully reproduced on Linux 2.6.26 and earlier PPP commits are unrelated). Signed-off-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-04tc-testing: skbmod: fix match value of ethertypeDavide Caratti1-1/+1
iproute2 print_skbmod() prints the configured ethertype using format 0x%X: therefore, test 9aa8 systematically fails, because it configures action #4 using ethertype 0x0031, and expects 0x0031 when it reads it back. Changing the expected value to 0x31 lets the test result 'not ok' become 'ok'. tested with: # ./tdc.py -e 9aa8 Test 9aa8: Get a single skbmod action from a list All test results: 1..1 ok 1 9aa8 Get a single skbmod action from a list Fixes: cf797ac49b94 ("tc-testing: Add test cases for police and skbmod") Signed-off-by: Davide Caratti <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-04mlxsw: spectrum_switchdev: Check success of FDB add operationShalom Toledo1-2/+27
Until now, we assumed that in case of error when adding FDB entries, the write operation will fail, but this is not the case. Instead, we need to check that the number of entries reported in the response is equal to the number of entries specified in the request. Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC") Reported-by: Ido Schimmel <[email protected]> Signed-off-by: Shalom Toledo <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-04Linux 4.16-rc4Linus Torvalds1-1/+1
2018-03-04Merge branch 'GSO_BY_FRAGS-correctness-improvements'David S. Miller12-51/+54
Daniel Axtens says: ==================== GSO_BY_FRAGS correctness improvements As requested [1], I went through and had a look at users of gso_size to see if there were things that need to be fixed to consider GSO_BY_FRAGS, and I have tried to improve our helper functions to deal with this case. I found a few. This fixes bugs relating to the use of skb_gso_*_seglen() where GSO_BY_FRAGS is not considered. Patch 1 renames skb_gso_validate_mtu to skb_gso_validate_network_len. This is follow-up to my earlier patch 2b16f048729b ("net: create skb_gso_validate_mac_len()"), and just makes everything a bit clearer. Patches 2 and 3 replace the final users of skb_gso_network_seglen() - which doesn't consider GSO_BY_FRAGS - with skb_gso_validate_network_len(), which does. This allows me to make the skb_gso_*_seglen functions private in patch 4 - now future users won't accidentally do the wrong comparison. Two things remain. One is qdisc_pkt_len_init, which is discussed at [2] - it's caught up in the GSO_DODGY mess. I don't have any expertise in GSO_DODGY, and it looks like a good clean fix will involve unpicking the whole validation mess, so I have left it for now. Secondly, there are 3 eBPF opcodes that change the gso_size of an SKB and don't consider GSO_BY_FRAGS. This is going through the bpf tree. Regards, Daniel [1] https://patchwork.ozlabs.org/comment/1852414/ [2] https://www.spinics.net/lists/netdev/msg482397.html PS: This is all in the core networking stack. For a driver to be affected by this it would need to support NETIF_F_GSO_SCTP / NETIF_F_GSO_SOFTWARE and then either use gso_size or not be a purely virtual device. (Many drivers look at gso_size, but do not support SCTP segmentation, so the core network will segment an SCTP gso before it hits them.) Based on that, the only driver that may be affected is sunvnet, but I have no way of testing it, so I haven't looked at it. v2: split out bpf stuff fix review comments from Dave Miller ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-04net: make skb_gso_*_seglen functions privateDaniel Axtens2-35/+35
They're very hard to use properly as they do not consider the GSO_BY_FRAGS case. Code should use skb_gso_validate_network_len and skb_gso_validate_mac_len as they do consider this case. Make the seglen functions static, which stops people using them outside of skbuff.c Signed-off-by: Daniel Axtens <[email protected]> Reviewed-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-04net: xfrm: use skb_gso_validate_network_len() to check gso sizesDaniel Axtens2-2/+3
Replace skb_gso_network_seglen() with skb_gso_validate_network_len(), as it considers the GSO_BY_FRAGS case. Signed-off-by: Daniel Axtens <[email protected]> Reviewed-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-04net: sched: tbf: handle GSO_BY_FRAGS case in enqueueDaniel Axtens1-1/+2
tbf_enqueue() checks the size of a packet before enqueuing it. However, the GSO size check does not consider the GSO_BY_FRAGS case, and so will drop GSO SCTP packets, causing a massive drop in throughput. Use skb_gso_validate_mac_len() instead, as it does consider that case. Signed-off-by: Daniel Axtens <[email protected]> Reviewed-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-04net: rename skb_gso_validate_mtu -> skb_gso_validate_network_lenDaniel Axtens9-13/+14
If you take a GSO skb, and split it into packets, will the network length (L3 headers + L4 headers + payload) of those packets be small enough to fit within a given MTU? skb_gso_validate_mtu gives you the answer to that question. However, we recently added to add a way to validate the MAC length of a split GSO skb (L2+L3+L4+payload), and the names get confusing, so rename skb_gso_validate_mtu to skb_gso_validate_network_len Signed-off-by: Daniel Axtens <[email protected]> Reviewed-by: Marcelo Ricardo Leitner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-04Merge branch 'x86/urgent' of ↵Linus Torvalds6-18/+21
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: "A small set of fixes for x86: - Add missing instruction suffixes to assembly code so it can be compiled by newer GAS versions without warnings. - Switch refcount WARN exceptions to UD2 as we did in general - Make the reboot on Intel Edison platforms work - A small documentation update so text and sample command match" * 'x86/urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: Documentation, x86, resctrl: Make text and sample command match x86/platform/intel-mid: Handle Intel Edison reboot correctly x86/asm: Add instruction suffixes to bitops x86/entry/64: Add instruction suffix x86/refcounts: Switch to UD2 for exceptions
2018-03-04Merge branch 'x86-pti-for-linus' of ↵Linus Torvalds8-26/+53
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86/pti fixes from Thomas Gleixner: "Three fixes related to melted spectrum: - Sync the cpu_entry_area page table to initial_page_table on 32 bit. Otherwise suspend/resume fails because resume uses initial_page_table and triggers a triple fault when accessing the cpu entry area. - Zero the SPEC_CTL MRS on XEN before suspend to address a shortcoming in the hypervisor. - Fix another switch table detection issue in objtool" * 'x86-pti-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu_entry_area: Sync cpu_entry_area to initial_page_table objtool: Fix another switch table detection issue x86/xen: Zero MSR_IA32_SPEC_CTRL before suspend
Powered by cgit, Gruvboxed by Blaster4385.