aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-08-04Merge branch 'drm-intel-next' of ↵Dave Airlie18-105/+594
ssh://master.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6 into drm-fixes * 'drm-intel-next' of ssh://master.kernel.org/pub/scm/linux/kernel/git/keithp/linux-2.6: (42 commits) drm/i915: allow cache sharing policy control drm/i915/hdmi: HDMI source product description infoframe support drm/i915/hdmi: split infoframe setting from infoframe type code drm: track CEA version number if present drm/i915: Try enabling RC6 by default (again) Revert "drm/i915/dp: Zero the DPCD data before connection probe" drm/i915/dp: wait for previous AUX channel activity to clear drm/i915: don't use uninitialized EDID bpc values when picking pipe bpp drm/i915/pch: Save/restore PCH_PORT_HOTPLUG across suspend drm/i915: apply phase pointer override on SNB+ too drm/i915: Add quirk to disable SSC on Sony Vaio Y2 drm/i915: provide more error output when mode sets fail drm/i915: add GPU max frequency control file i915: add Dell OptiPlex FX170 to intel_no_lvds drm/i915: Ignore GPU wedged errors while pinning scanout buffers drm/i915/hdmi: send AVI info frames on ILK+ as well drm/i915: fix CB tuning check for ILK+ drm/i915: Flush other plane register writes drm/i915: flush plane control changes on ILK+ as well drm/i915: apply timing generator bug workaround on CPT and PPT ...
2011-08-04drm/radeon/kms: add thermal chip quirk for asus 9600xtAlex Deucher1-1/+20
The board has an lm63 compatible thermal chip, but no thermal chip entry in the vbios tables. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=39513 Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2011-08-04drm/radeon: off by one in check_reg() functionsDan Carpenter2-3/+2
This off by one range check was copy and pasted a couple places. It's not really harmful, but we should fix it anyway. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2011-08-04drm/radeon/kms: fix version comment due to merge timingAlex Deucher1-2/+2
Compute cs support was actually added in 2.11.0 rather than 2.10.0, but the patch was written prior. Update comment to match. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2011-08-04ixgbe: fix PHY link setup for 82599Emil Tantilov1-0/+1
Fix pointer to setup_link for 82599. This resolves some link issues when advertising modes unsupported by the link partner. Signed-off-by: Emil Tantilov <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2011-08-04ixgbe: fix __ixgbe_notify_dca() bail out codeDon Skidmore1-1/+1
The way __ixgbe_notify_dca() was currently set up it would not be possible to add a requester. Both cases of the IXGBE_FLAG_DCA_ENABLED bit being on and off would lead to the function exiting for a DCA_PROVIDER_ADD. Signed-off-by: Don Skidmore <[email protected]> Tested-by: Phil Schmitt <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2011-08-04igb: fix WOL on second port of i350 deviceCarolyn Wyborny1-1/+1
This patch fixes a problem where WOL would fail on second port of i350 device. Reported-by: Martin Wilck <[email protected]> Reported-by: Stefan Assmann<[email protected]> Signed-off-by: Carolyn Wyborny <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2011-08-04e1000e: minor re-order of #include filesBruce Allan2-2/+2
The recent commit a6b7a407 when back-ported to the out-of-tree e1000e driver caused a compilation error on older kernels which required a re-ordering of the #include files. This cosmetic patch syncs the two drivers for easier maintainability. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2011-08-04e1000e: remove unnecessary check for NULL pointerBruce Allan1-2/+1
The array shadow_ram is never NULL. Signed-off-by: Bruce Allan <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2011-08-04intel drivers: repair missing flush operationsJesse Brandeburg18-0/+59
after review of all intel drivers, found several instances where drivers had the incorrect pattern of: memory mapped write(); delay(); which should always be: memory mapped write(); write flush(); /* aka memory mapped read */ delay(); explanation: The reason for including the flush is that writes can be held (posted) in PCI/PCIe bridges, but the read always has to complete synchronously and therefore has to flush all pending writes to a device. If a write is held and followed by a delay, the delay means nothing because the write may not have reached hardware (maybe even not until the next read) Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2011-08-04Revert "dt: add of_alias_scan and of_alias_get_id"Grant Likely4-141/+2
This reverts commit 750f463a749e28464151ad26938d11b07b1c43cb. of_alias_* still needs work to be generalized for 'promtree' dt platforms, and to no implicitly create entries for available ids. Signed-off-by: Grant Likely <[email protected]>
2011-08-04dt: remove of_alias_get_id() referenceGrant Likely1-9/+4
of_alias_get_id() is broken and being reverted. Remove the reference to it and replace with a single incrementing id number. There is no risk of regression here on the imx driver since the imx change to use of_alias_get_id() is commit 22698aa2, "serial/imx: add device tree probe support" which is new for v3.1, and it won't get used unless CONFIG_OF is enabled and the board is booted using a device tree. A single incrementing integer is sufficient for now. Signed-off-by: Grant Likely <[email protected]> Acked-by: Shawn Guo <[email protected]>
2011-08-04sparc: Fix __atomic_add_unless() return value.Josip Rodin1-1/+1
Signed-off-by: David S. Miller <[email protected]>
2011-08-04macb: restore wrap bit when performing underrun cleanupTord Andersson1-0/+3
When TX underrun occurs, a cleanup is performed that marks all buffers as used. As a side effect it also clears the wrap bit in the last buffer. This patch will restore the wrap bit. Signed-off-by: Tord Andersson <[email protected]> Acked-by: Nicolas Ferre <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-08-04cdc_ncm: fix endianness problem.Giuseppe Scrivano1-100/+56
Fix a misusage of the struct usb_cdc_notification to pass arguments to the usb_control_msg function. The usb_control_msg function expects host endian arguments but usb_cdc_notification stores these values as little endian. Now usb_control_msg is directly invoked with host endian values. Signed-off-by: Giuseppe Scrivano <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-08-04sparc: use kbuild-generic support for true asm-generic header filesSam Ravnborg5-9/+5
Signed-off-by: Sam Ravnborg <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-08-04drivers/ide/cy82c693.c: Add missing pci_dev_putJulia Lawall1-0/+2
Pci_get_slot calls pci_dev_get, so pci_dev_put is needed before leaving the function in the case where pci_get_slot is locally used. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ local idexpression x; expression e; @@ *x = pci_get_slot(...) ... when != true x == NULL when != pci_dev_put(x) when != e = x when != if (x != NULL) {<+... pci_dev_put(x); ...+>} *return ...; // </smpl> Signed-off-by: Julia Lawall <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-08-04ide: Fix irq flags madnessThomas Gleixner1-1/+5
commit ec1a123 (IDE: pass IRQ flags to the IDE core) introduced the bogosity of passing unfiltered resource->flags to the irq_flags which are used for request_irq. It results in random bits set (especially IORESOURCE_IRQ which maps to IRQF_PER_CPU). Filter the bits proper. Signed-off-by: Thomas Gleixner <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-08-04slab, lockdep: Annotate the locks before using themPeter Zijlstra1-3/+3
Fernando found we hit the regular OFF_SLAB 'recursion' before we annotate the locks, cure this. The relevant portion of the stack-trace: > [ 0.000000] [<c085e24f>] rt_spin_lock+0x50/0x56 > [ 0.000000] [<c04fb406>] __cache_free+0x43/0xc3 > [ 0.000000] [<c04fb23f>] kmem_cache_free+0x6c/0xdc > [ 0.000000] [<c04fb2fe>] slab_destroy+0x4f/0x53 > [ 0.000000] [<c04fb396>] free_block+0x94/0xc1 > [ 0.000000] [<c04fc551>] do_tune_cpucache+0x10b/0x2bb > [ 0.000000] [<c04fc8dc>] enable_cpucache+0x7b/0xa7 > [ 0.000000] [<c0bd9d3c>] kmem_cache_init_late+0x1f/0x61 > [ 0.000000] [<c0bba687>] start_kernel+0x24c/0x363 > [ 0.000000] [<c0bba0ba>] i386_start_kernel+0xa9/0xaf Reported-by: Fernando Lopez-Lezcano <[email protected]> Acked-by: Pekka Enberg <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/1311888176.2617.379.camel@laptop Signed-off-by: Ingo Molnar <[email protected]>
2011-08-04lockdep: Clear whole lockdep_map on initializationTejun Heo1-4/+1
lockdep_init_map() only initializes parts of lockdep_map and triggers kmemcheck warning when it is copied as a whole. There isn't anything to be gained by clearing selectively. memset() the whole structure and remove loop for ->class_cache[] clearing. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=35532 Signed-off-by: Tejun Heo <[email protected]> Reported-and-tested-by: Christian Casteyde <[email protected]> Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=35532 Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2011-08-04slab, lockdep: Annotate slab -> rcu -> debug_object -> slabPeter Zijlstra1-18/+68
Lockdep thinks there's lock recursion through: kmem_cache_free() cache_flusharray() spin_lock(&l3->list_lock) <----------------. free_block() | slab_destroy() | call_rcu() | debug_object_activate() | debug_object_init() | __debug_object_init() | kmem_cache_alloc() | cache_alloc_refill() | spin_lock(&l3->list_lock) --' Now debug objects doesn't use SLAB_DESTROY_BY_RCU and hence there is no actual possibility of recursing. Luckily debug objects marks it slab with SLAB_DEBUG_OBJECTS so we can identify the thing. Mark all SLAB_DEBUG_OBJECTS (all one!) slab caches with a special lockdep key so that lockdep sees its a different cachep. Also add a WARN on trying to create a SLAB_DESTROY_BY_RCU | SLAB_DEBUG_OBJECTS cache, to avoid possible future trouble. Reported-and-tested-by: Sebastian Siewior <[email protected]> [ fixes to the initial patch ] Reported-by: Thomas Gleixner <[email protected]> Acked-by: Pekka Enberg <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/1311341165.27400.58.camel@twins Signed-off-by: Ingo Molnar <[email protected]>
2011-08-04lockdep: Fix up warningPeter Zijlstra1-1/+1
On Sun, 2011-07-24 at 21:06 -0400, Arnaud Lacombe wrote: > /src/linux/linux/kernel/lockdep.c: In function 'mark_held_locks': > /src/linux/linux/kernel/lockdep.c:2471:31: warning: comparison of > distinct pointer types lacks a cast The warning is harmless in this case, but the below makes it go away. Reported-by: Arnaud Lacombe <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/1311588599.2617.56.camel@laptop Signed-off-by: Ingo Molnar <[email protected]>
2011-08-04lockdep: Fix trace_hardirqs_on_caller()Peter Zijlstra1-14/+16
Commit dd4e5d3ac4a ("lockdep: Fix trace_[soft,hard]irqs_[on,off]() recursion") made a bit of a mess of the various checks and error conditions. In particular it moved the check for !irqs_disabled() before the spurious enable test, resulting in some warnings. Reported-by: Arnaud Lacombe <[email protected]> Reported-by: Dave Jones <[email protected]> Reported-and-tested-by: Sergey Senozhatsky <[email protected]> Signed-off-by: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/1311679697.24752.28.camel@twins Signed-off-by: Ingo Molnar <[email protected]>
2011-08-03Boot up with usermodehelper disabledLinus Torvalds2-2/+5
The core device layer sends tons of uevent notifications for each device it finds, and if the kernel has been built with a non-empty CONFIG_UEVENT_HELPER_PATH that will make us try to execute the usermode helper binary for all these events very early in the boot. Not only won't the root filesystem even be mounted at that point, we literally won't have necessarily even initialized all the process handling data structures at that point, which causes no end of silly problems even when the usermode helper doesn't actually succeed in executing. So just use our existing infrastructure to disable the usermodehelpers to make the kernel start out with them disabled. We enable them when we've at least initialized stuff a bit. Problems related to an uninitialized init_ipc_ns.ids[IPC_SHM_IDS].rw_mutex reported by various people. Reported-by: Manuel Lauss <[email protected]> Reported-by: Richard Weinberger <[email protected]> Reported-by: Marc Zyngier <[email protected]> Acked-by: Kay Sievers <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Vasiliy Kulikov <[email protected]> Cc: Greg KH <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-08-03x86: don't include xen/xen.h in <asm/io.h> unless XEN is enabledLinus Torvalds1-2/+1
Dmitry Kasatkin reports: "kernel-devel package with kernel headers have no <include/xen> directory if XEN is disabled. Modules which inclide asm/io.h won't compile. XEN related content is behind the CONFIG_XEN flag in the io.h. And <xen/xen.h> should be also behind CONFIG_XEN flag." So move the include of <xen/xen.h> down into the section that is conditional on CONFIG_XEN. Reported-by: Dmitry Kasatkin <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-08-03Merge branch 'for-linus' of ↵Linus Torvalds9-7/+36
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: ad7879 - fix deficient device disable Input: gpio_keys - fix two typos in devicetree documentation Input: mma8450 - add device tree probe support Input: gpio_keys - return proper error code if memory allocation fails Input: lm8323 - add missing device_remove_file for dev_attr_time Input: tegra-kbc - fix computation of polling time Input: kxtj9 - explicitly include module.h Input: psmouse - hgpk.c needs module.h
2011-08-03Merge branch 'idle-release' of ↵Linus Torvalds18-50/+1141
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6 * 'idle-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-idle-2.6: cpuidle: stop depending on pm_idle x86 idle: move mwait_idle_with_hints() to where it is used cpuidle: replace xen access to x86 pm_idle and default_idle cpuidle: create bootparam "cpuidle.off=1" mrst_pmu: driver for Intel Moorestown Power Management Unit
2011-08-03Merge branch 'apei-release' of ↵Linus Torvalds35-135/+1172
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'apei-release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI, APEI, EINJ Param support is disabled by default APEI GHES: 32-bit buildfix ACPI: APEI build fix ACPI, APEI, GHES: Add hardware memory error recovery support HWPoison: add memory_failure_queue() ACPI, APEI, GHES, Error records content based throttle ACPI, APEI, GHES, printk support for recoverable error via NMI lib, Make gen_pool memory allocator lockless lib, Add lock-less NULL terminated single list Add Kconfig option ARCH_HAVE_NMI_SAFE_CMPXCHG ACPI, APEI, Add WHEA _OSC support ACPI, APEI, Add APEI bit support in generic _OSC call ACPI, APEI, GHES, Support disable GHES at boot time ACPI, APEI, GHES, Prevent GHES to be built as module ACPI, APEI, Use apei_exec_run_optional in APEI EINJ and ERST ACPI, APEI, Add apei_exec_run_optional ACPI, APEI, GHES, Do not ratelimit fatal error printk before panic ACPI, APEI, ERST, Fix erst-dbg long record reading issue ACPI, APEI, ERST, Prevent erst_dbg from loading if ERST is disabled
2011-08-04Merge branch 'linus' into core/urgentIngo Molnar7972-372621/+482800
2011-08-03dmaengine: use DEFINE_IDR for static initializationAxel Lin1-3/+1
We could use DEFINE_IDR for statically allocated idr that allow us to save a few lines of code. And also remove unneeded mutex_init() for dma_list_mutex, as dma_list_mutex is initialized automatically by DEFINE_MUTEX(). Signed-off-by: Axel Lin <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2011-08-03ioat: fix xor_idx_to_descDan Williams1-1/+1
For versions of the device that implement operation-types 0x87, 0x88 (IOAT_OP_XOR, IOAT_OP_XOR_VAL) this map determines whether a given source is located in the base or extended descriptor. Source addresses 6 through 8 require an extended descriptor, hence 0xe0, not 0xd0. No shipping hardware currently implements these operation types. Reported-by: Evgueni Smogailov <[email protected]> Signed-off-by: Dan Williams <[email protected]>
2011-08-03irda: use PCI_VENDOR_ID_*Jon Mason1-10/+8
Use PCI_VENDOR_ID_* from pci_ids.h instead of creating #define locally. Signed-off-by: Jon Mason <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-08-03Merge branch 'for-next' of ↵Linus Torvalds9-59/+122
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: tcm_fc: Handle DDP/SW fc_frame_payload_get failures in ft_recv_write_data target: Fix bug for transport_generic_wait_for_tasks with direct operation target: iscsi_target depends on NET target: Fix WRITE_SAME_16 lba assignment breakage MAINTAINERS: Add target-devel list for drivers/target/ iscsi-target: Fix CONFIG_SMP=n and CONFIG_MODULES=n build failure iscsi-target: Fix snprintf usage with MAX_PORTAL_LEN iscsi-target: Fix uninitialized usage of cmd->pad_bytes iscsi-target: strlen() doesn't count the terminator iscsi-target: Fix NULL dereference on allocation failure
2011-08-03Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds4-2/+141
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: dt: add of_alias_scan and of_alias_get_id
2011-08-03Merge branch 'for_linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: use kzalloc in ext4_kzalloc()
2011-08-03shm: optimize exit_shm()Vasiliy Kulikov1-0/+3
We may optimistically check .in_use == 0 without holding the rw_mutex: it's the common case, and if it's zero, there certainly won't be any segments associated with us. After taking the lock, the idr_for_each() will do the right thing, so we could now drop the re-check inside the lock without any real cost. But it won't hurt. Signed-off-by: Vasiliy Kulikov <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-08-03shm: fix wrong testsVasiliy Kulikov1-2/+2
Commit 4c677e2eefdb ("shm: optimize locking and ipc_namespace getting") introduced a copy-paste bug. Due to the bug cycle optimizations were disabled. Signed-off-by: Vasiliy Kulikov <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-08-03drm/i915: allow cache sharing policy controlJesse Barnes2-0/+107
Expose the SNB+ cache sharing policy register in debugfs. The new file, i915_cache_sharing, has 4 values, 0-3, with 0 being "max uncore resources" and 3 being the minimum. Exposing this control should make benchmarking easier and help us choose a good default. Signed-off-by: Jesse Barnes <[email protected]> Signed-off-by: Keith Packard <[email protected]>
2011-08-03drm/i915/hdmi: HDMI source product description infoframe supportJesse Barnes2-0/+37
Set an SPD infoframe if the sink supports it. Signed-off-by: Jesse Barnes <[email protected]> Signed-off-by: Keith Packard <[email protected]>
2011-08-03drm/i915/hdmi: split infoframe setting from infoframe type codeJesse Barnes3-46/+106
This makes it easier to add support for other infoframes (e.g. SPD, vendor specific). Signed-off-by: Jesse Barnes <[email protected]> Signed-off-by: Keith Packard <[email protected]>
2011-08-03drm: track CEA version number if presentJesse Barnes2-0/+11
Drivers need to know the CEA version number in addition to other display info (like whether the display is an HDMI sink) before enabling certain features. So track the CEA version number in the display info structure. Signed-off-by: Jesse Barnes <[email protected]> Signed-off-by: Keith Packard <[email protected]>
2011-08-03tmpfs: expand "help" to explain value of TMPFS_POSIX_ACLRobert P. J. Day1-4/+11
Expand the fs/Kconfig "help" info to clarify why it's a bad idea to deselect the TMPFS_POSIX_ACL config variable. Signed-off-by: Robert P. J. Day <[email protected]> Acked-by: Randy Dunlap <[email protected]> Acked-by: Hugh Dickins <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-08-03mm: clarify the radix_tree exceptional casesHugh Dickins3-26/+53
Make the radix_tree exceptional cases, mostly in filemap.c, clearer. It's hard to devise a suitable snappy name that illuminates the use by shmem/tmpfs for swap, while keeping filemap/pagecache/radix_tree generality. And akpm points out that /* radix_tree_deref_retry(page) */ comments look like calls that have been commented out for unknown reason. Skirt the naming difficulty by rearranging these blocks to handle the transient radix_tree_deref_retry(page) case first; then just explain the remaining shmem/tmpfs swap case in a comment. Signed-off-by: Hugh Dickins <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-08-03tmpfs radix_tree: locate_item to speed up swapoffHugh Dickins3-37/+94
We have already acknowledged that swapoff of a tmpfs file is slower than it was before conversion to the generic radix_tree: a little slower there will be acceptable, if the hotter paths are faster. But it was a shock to find swapoff of a 500MB file 20 times slower on my laptop, taking 10 minutes; and at that rate it significantly slows down my testing. Now, most of that turned out to be overhead from PROVE_LOCKING and PROVE_RCU: without those it was only 4 times slower than before; and more realistic tests on other machines don't fare as badly. I've tried a number of things to improve it, including tagging the swap entries, then doing lookup by tag: I'd expected that to halve the time, but in practice it's erratic, and often counter-productive. The only change I've so far found to make a consistent improvement, is to short-circuit the way we go back and forth, gang lookup packing entries into the array supplied, then shmem scanning that array for the target entry. Scanning in place doubles the speed, so it's now only twice as slow as before (or three times slower when the PROVEs are on). So, add radix_tree_locate_item() as an expedient, once-off, single-caller hack to do the lookup directly in place. #ifdef it on CONFIG_SHMEM and CONFIG_SWAP, as much to document its limited applicability as save space in other configurations. And, sadly, #include sched.h for cond_resched(). Signed-off-by: Hugh Dickins <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-08-03mm: a few small updates for radix-swapHugh Dickins4-26/+18
Remove PageSwapBacked (!page_is_file_cache) cases from add_to_page_cache_locked() and add_to_page_cache_lru(): those pages now go through shmem_add_to_page_cache(). Remove a comment on maximum tmpfs size from fsstack_copy_inode_size(), and add a comment on swap entries to invalidate_mapping_pages(). And mincore_page() uses find_get_page() on what might be shmem or a tmpfs file: allow for a radix_tree_exceptional_entry(), and proceed to find_get_page() on swapper_space if so (oh, swapper_space needs #ifdef). Signed-off-by: Hugh Dickins <[email protected]> Acked-by: Rik van Riel <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-08-03tmpfs: use kmemdup for short symlinksHugh Dickins2-21/+21
But we've not yet removed the old swp_entry_t i_direct[16] from shmem_inode_info. That's because it was still being shared with the inline symlink. Remove it now (saving 64 or 128 bytes from shmem inode size), and use kmemdup() for short symlinks, say, those up to 128 bytes. I wonder why mpol_free_shared_policy() is done in shmem_destroy_inode() rather than shmem_evict_inode(), where we usually do such freeing? I guess it doesn't matter, and I'm not into NUMA mpol testing right now. Signed-off-by: Hugh Dickins <[email protected]> Acked-by: Rik van Riel <[email protected]> Reviewed-by: Pekka Enberg <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-08-03tmpfs: convert shmem_writepage and enable swapHugh Dickins1-51/+37
Convert shmem_writepage() to use shmem_delete_from_page_cache() to use shmem_radix_tree_replace() to substitute swap entry for page pointer atomically in the radix tree. As with shmem_add_to_page_cache(), it's not entirely satisfactory to be copying such code from delete_from_swap_cache, but again judged easier to sell than making its other callers go through the extras. Remove the toy implementation's shmem_put_swap() and shmem_get_swap(), now unreferenced, and the hack to disable swap: it's now good to go. The way things have worked out, info->lock no longer helps to guard the shmem_swaplist: we increment swapped under shmem_swaplist_mutex only. That global mutex exclusion between shmem_writepage() and shmem_unuse() is not pretty, and we ought to find another way; but it's been forced on us by recent race discoveries, not a consequence of this patchset. And what has become of the WARN_ON_ONCE(1) free_swap_and_cache() if a swap entry was found already present? That's no longer possible, the (unknown) one inserting this page into filecache would hit the swap entry occupying that slot. Signed-off-by: Hugh Dickins <[email protected]> Acked-by: Rik van Riel <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-08-03tmpfs: convert mem_cgroup shmem to radix-swapHugh Dickins4-139/+20
Remove mem_cgroup_shmem_charge_fallback(): it was only required when we had to move swappage to filecache with GFP_NOWAIT. Remove the GFP_NOWAIT special case from mem_cgroup_cache_charge(), by moving its call out from shmem_add_to_page_cache() to two of thats three callers. But leave it doing mem_cgroup_uncharge_cache_page() on error: although asymmetrical, it's easier for all 3 callers to handle. These two changes would also be appropriate if anyone were to start using shmem_read_mapping_page_gfp() with GFP_NOWAIT. Remove mem_cgroup_get_shmem_target(): mc_handle_file_pte() can test radix_tree_exceptional_entry() to get what it needs for itself. Signed-off-by: Hugh Dickins <[email protected]> Acked-by: Rik van Riel <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-08-03tmpfs: convert shmem_getpage_gfp to radix-swapHugh Dickins1-147/+112
Convert shmem_getpage_gfp(), the engine-room of shmem, to expect page or swap entry returned from radix tree by find_lock_page(). Whereas the repetitive old method proceeded mainly under info->lock, dropping and repeating whenever one of the conditions needed was not met, now we can proceed without it, leaving shmem_add_to_page_cache() to check for a race. This way there is no need to preallocate a page, no need for an early radix_tree_preload(), no need for mem_cgroup_shmem_charge_fallback(). Move the error unwinding down to the bottom instead of repeating it throughout. ENOSPC handling is a little different from before: there is no longer any race between find_lock_page() and finding swap, but we can arrive at ENOSPC before calling shmem_recalc_inode(), which might occasionally discover freed space. Be stricter to check i_size before returning. info->lock is used for little but alloced, swapped, i_blocks updates. Move i_blocks updates out from under the max_blocks check, so even an unlimited size=0 mount can show accurate du. Signed-off-by: Hugh Dickins <[email protected]> Acked-by: Rik van Riel <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-08-03tmpfs: convert shmem_unuse_inode to radix-swapHugh Dickins1-26/+107
Convert shmem_unuse_inode() to use a lockless gang lookup of the radix tree, searching for matching swap. This is somewhat slower than the old method: because of repeated radix tree descents, because of copying entries up, but probably most because the old method noted and skipped once a vector page was cleared of swap. Perhaps we can devise a use of radix tree tagging to achieve that later. shmem_add_to_page_cache() uses shmem_radix_tree_replace() to compensate for the lockless lookup by checking that the expected entry is in place, under lock. It is not very satisfactory to be copying this much from add_to_page_cache_locked(), but I think easier to sell than insisting that every caller of add_to_page_cache*() go through the extras. Signed-off-by: Hugh Dickins <[email protected]> Acked-by: Rik van Riel <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>