aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-09-30OMAP: Devkit8000: Change lcd driver to AT070TN83Thomas Weber1-1/+1
Change lcd driver from generic to AT070TN83. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: DSS2: Support for Innolux AT070TN83Thomas Weber1-0/+25
Add support for Innolux AT070TN83, a 7 inch LCD with RGB-Interface and touch panel to panel-generic-dpi. Tested with Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: DSS2: reorganize functions in dss.hTomi Valkeinen1-24/+22
Group dispc's overlay and manager related functions. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: DSS2: DISPC: rename manager related funcsTomi Valkeinen8-117/+119
Rename dispc's manager related functions as follows: - Remove prepending underscores, which were originally used to inform that the clocks needs to be enabled. This meaning is no longer valid. - Prepend the functions with dispc_mgr_* - Remove "channel" from the name, e.g. dispc_enable_channel -> dispc_mgr_enable The idea is to group manager related functions so that it can be deduced from the function name that it writes to manager spesific registers. All dispc_mgr_* functions have enum omap_channel as the first parameter. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: DSS2: DISPC: rename overlay related funcsTomi Valkeinen3-90/+94
Rename dispc's overlay related functions as follows: - Remove prepending underscores, which were originally used to inform that the clocks needs to be enabled. This meaning is no longer valid. - Prepend the functions with dispc_ovl_* - Remove "plane" from the name, e.g. dispc_set_plane_ba0 -> dispc_ovl_set_ba0 The idea is to group overlay related functions so that it can be deduced from the function name that it writes to overlay spesific registers. All dispc_ovl_* functions have enum omap_plane as the first parameter. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: DSS2: DISPC: remove non-existing func prototypesTomi Valkeinen1-5/+0
The functions do not exist, so remove the prototypes. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: OMAPFB: string parsing cleanupsTomi Valkeinen1-4/+2
Use strtobool instead of kstrtoint when parsing bool from sysfs. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: DSS2: string parsing cleanupsTomi Valkeinen3-33/+32
Use strtobool and kstrto* functions when parsing sysfs inputs. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: DSS2: Add GLOBAL_ALPHA & PRE_MULT_ALPHA to ovl capsTomi Valkeinen5-40/+27
Add OMAP_DSS_OVL_CAP_GLOBAL_ALPHA and OMAP_DSS_OVL_CAP_PRE_MULT_ALPHA to overlay capabilities. Use these instead of FEAT_GLOBAL_ALPHA, FEAT_GLOBAL_ALPHA_VID1 and FEAT_PRE_MULT_ALPHA in code. Remove FEAT_GLOBAL_ALPHA_VID1 and FEAT_PRE_MULT_ALPHA which are no longer used. FEAT_GLOBAL_ALPHA is still used to decide if the HW has global alpha register. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Archit Taneja <archit@ti.com>
2011-09-30OMAP: DSS2: Add overlay caps to DSS featuresTomi Valkeinen3-3/+57
Add support to define overlay capabilities into dss_features. The features are set to overlay->caps at initialization time. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Archit Taneja <archit@ti.com>
2011-09-30OMAP: DSS2: DISPC: use lookup tables for bit shiftsTomi Valkeinen1-154/+50
Use lookup tables instead of switch/if in some DISPC functions to make the code cleaner. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Archit Taneja <archit@ti.com>
2011-09-30OMAP: DSS2: Remove support for non-DISPC overlaysTomi Valkeinen6-275/+22
Remove support for non-DISPC overlays and overlay managers. The support to possibly have non-DISPC overlays and managers was made to make it possible to use CPU and/or sDMA to update RFBI or DSI command mode displays. It is ok to remove the support, because: - No one has used the feature. - Display update without DISPC is very slow, so it is debatable if the update would even be usable. - Removal cleans up code. - If such a feature is needed later, it is better implemented outside omapdss driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com> Acked-by: Archit Taneja <archit@ti.com>
2011-09-30OMAP: DSS2: Remove "EXPERIMENTAL" from KconfigTomi Valkeinen2-2/+2
DSS driver has not been "experimental" for many years now, so perhaps it's time to remove the text from Kconfig titles. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: DSS2: Handle manager change in applyTomi Valkeinen5-10/+11
Currently when changing the manager of an overlay, set_manager() directly calls dispc to set the overlay's destination. Change this to be more in line with other overlay configurations, and this will also remove the need to have dispc clocks enabled when calling set_manager(). A new field is added to overlay struct, "manager_changed". This is similar to "display_changed" field in manager struct, and is used to inform apply that the manager has changed and thus write to the registers is needed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: DSS2: fix clock sources on error and uninitTomi Valkeinen2-1/+6
DPI and DSI were not cleaning up the clock source in error or uninit cases. Set the clock source back to PRCM. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: OMAPFB: make omapfb start even when a display is missing a driverTomi Valkeinen1-2/+3
Currently omapfb wants that all the display devices have a driver, otherwise omapfb refuses to start. There's no real requirement to act like that, and this patch will make omapfb give a warning and skip that device. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: DSS2: Implement dsi_mux_pads for OMAP4Tomi Valkeinen1-0/+40
Implement dsi_mux_pads for OMAP4. On enable the function enables the DSI pins and disables pull down. On disable the function disables the pins and enables pull down. It is unclear from the TRM whether the pull down is active if the pins are disabled, so this implementation may leave the pins floating when the DSI device is disabled. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: DSS2: DSI: Improve dsi_mux_pads parametersTomi Valkeinen3-12/+47
dsi_mux_pads() needs to know about the DSI HW module and the DSI lanes used. Split the function into two, enable and disable, which take necessary arguments, and add empty implementations for both. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP4: TWL: Add common omapdss suppliesTomi Valkeinen1-0/+9
OMAP DSS normally gets power from VCXIO on OMAP4. Add configuration for this into twl-common.c Mark VCXIO as always_on, as VCXIO is used by multiple components, including the MPU, and turning it off when DSS doesn't need it would lead the device to halt. Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAP: DSS2: Change DSI device namingTomi Valkeinen5-21/+16
Currently, there are 2 differently named platform devices generated for the 2 DSS DSI modules. In order to use the same driver, the dsi devices should be 2 instances of the same platform device. Change the platform device names from "omapdss_dsi1" and "omapdss_dsi2" to omapdss_dsi", and set the device indices to 0 and 1. Signed-off-by: Archit Taneja <archit@ti.com> Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-20OMAP: DSS2: remove unneeded fck enable/disablesTomi Valkeinen5-39/+0
Now that the HWMOD fmwk handles the fcks of DSS modules properly, the DSS driver no longer needs to explicitely enable/disable the fck. This patch removes the enables/disables of fck from dispc, dsi and dss. The clk_get(fck) is still needed there, as the modules need to know the frequency of the clock. For hdmi and venc this patch also removes the clk_get(fck), as they don't need the clock at all. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-20Revert "OMAP: DSS2: HDMI: fix hdmi clock name"Tomi Valkeinen1-2/+2
This reverts commit df5d3ed23cf73ee0763a8963003bda9b69d9620f. The HDMI clock name has been fixed in HWMOD data. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-20Revert "HACK: OMAP: DSS2: clk hack for OMAP2/3"Tomi Valkeinen5-19/+3
This reverts commit 9ede365aa6f74428a1f69c21ca1cf21213167576. The hack is no longer needed, as the HWMOD data has been fixed. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-14OMAP: DSS2: Use a macro to declare size of the fifo_size array in dispc.cArchit Taneja1-2/+2
The array size of fifo_size array in the global dispc struct is currently hardcoded to 3. Replace this with the MAX_DSS_OVERLAYS macro in dss_features.h, use dss_features function to get the number of overlays instead of the ARRAY_SIZE macro in dispc_read_plane_fifo_sizes(). Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-14OMAP: DSS2: DISPC: Shorten _dispc_set_color_conv_coef()Archit Taneja1-26/+16
Iterate over overlay id's to shorten _dispc_set_color_conv_coef() Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-14OMAP: DSS2: DISPC: dispc_save_context() and dispc_restore_context() cleanupArchit Taneja1-277/+125
Iterate over manager and overlay id's to shorten dispc_save_context() and dispc_restore_context(). Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-14OMAP: DSS2: DISPC: Shorten dispc_dump_regs()Archit Taneja1-229/+99
Iterate over manager and overlay id's to shorten dispc_dump_regs(). Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-14OMAP: DSS2: DISPC: Prepare dispc_dump_regs() for shorteningArchit Taneja1-205/+239
Prepare dispc_dump_regs() to iterate over manager and overlay id's. Doing this requires modifications of the macro "DUMPREG" which currently needs us to specify the manager/overlay name to get the correct result. For example, in order to print the register DISPC_TIMING_H(OMAP_DSS_CHANNEL_LCD), we can't iterate over a varaible i and get the desired result through DUMPREG(DISPC_TIMING_H(i)). Split the registers into 3 sections, the first with no arguments(common registers), the second with one argument(manager/overlay id), and the third with two arguments(overlay id and coefficient index), redefine DUMPREG macros for each of these. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-14OMAPFB: make debug message more usefulAndy Doan1-1/+2
Make the debug message useful by printing the name of the device that no associated driver could be found for. Signed-off-by: Andy Doan <andy.doan@linaro.org> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-14OMAP: DSS: dispc: enable/disable clocks in error handlerDima Zavin1-0/+4
There's no guarantee that the error handler worker thread will run while the dispc clocks are on. Explicitly enable/disable them. Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-14OMAP: DSS2: Don't allow moving managers away from enabled displaysDaniel Morsing1-0/+7
If a manager is moved while attached to an enabled display, the DSS system will be left in an inconsistent state. This will eventually cause a kernel oops when the enabled display is disabled. Fix this by not allowing the user to move a manager away from an enabled display. Signed-off-by: Daniel Morsing <daniel.morsing@gmail.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-14OMAP: DSS2: check for manager when enabling displayTomi Valkeinen5-0/+27
None of the DSS interface drivers check if an overlay manager is connected to the display when the display is being enabled. This leads to null pointer crash if the display has no manager. This patch checks for the manager and returns an error if it is null. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-14OMAP: DSS2: PicoDLP: fix error handling in power_onTomi Valkeinen1-2/+4
Fix two problems in PicoDLP driver's error handling on picodlp_panel_power_on: - If omapdss_dpi_display_enable() failed, the its error value was not returned - If picodlp_i2c_init() failed, dssdev->state was erroneously set to OMAP_DSS_DISPLAY_ACTIVE Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-14OMAP: DSS2: Add picodlp panel driverMayuresh Janorkar5-0/+910
PicoDLP is a micro projector from TI. DLP used in OMAP4 is dpp2600 (DLP Pico Projector) The DLP requires commands to be sent over i2c for configurations. To know more about dpp2600 commands please visit: https://focus.ti.com/myti/docs/extranet.tsp?sectionId=403 The picodlp module consists of a dss driver and an i2c_client. To know more please visit: http://www.omappedia.org/wiki/PicoDLP_projector_guide Based on original design from Mythri P K <mythripk@ti.com> Signed-off-by: Mayuresh Janorkar <mayur@ti.com> Signed-off-by: Mythri P K <mythripk@ti.com> [tomi.valkeinen@ti.com: squashed commits] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-12Linux 3.1-rc6Linus Torvalds1-1/+1
2011-09-12Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds7-28/+66
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm: Remove duplicate "return" statement drm/nv04/crtc: Bail out if FB is not bound to crtc drm/nouveau: fix nv04_sgdma_bind on non-"4kB pages" archs drm/nouveau: properly handle allocation failure in nouveau_sgdma_populate drm/nouveau: fix oops on pre-semaphore hardware drm/nv50/crtc: Bail out if FB is not bound to crtc drm/radeon/kms: fix DP detect and EDID fetch for DP bridges
2011-09-12Merge branch 'fixes' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds18-18/+72
* 'fixes' of git://git.linaro.org/people/arnd/arm-soc: ARM: CSR: add missing sentinels to of_device_id tables ARM: cns3xxx: Fix newly introduced warnings in the PCIe code ARM: cns3xxx: Fix compile error caused by hardware.h removed ARM: davinci: fix cache flush build error ARM: davinci: correct MDSTAT_STATE_MASK ARM: davinci: da850 EVM: read mac address from SPI flash OMAP: omap_device: fix !CONFIG_SUSPEND case in _noirq handlers OMAP2430: hwmod: musb: add missing terminator to omap2430_usbhsotg_addrs[] OMAP3: clock: indicate that gpt12_fck and wdt1_fck are in the WKUP clockdomain OMAP4: clock: fix compile warning OMAP4: clock: re-enable previous clockdomain enable/disable sequence OMAP: clockdomain: Wait for powerdomain to be ON when using clockdomain force wakeup OMAP: powerdomains: Make all powerdomain target states as ON at init
2011-09-12ioctl: register LTTng ioctlMathieu Desnoyers1-0/+2
The LTTng 2.0 kernel tracer (stand-alone module package, available at http://lttng.org) uses the 0xF6 ioctl range for tracer control and transport operations. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-12Merge branch 'for-linus' of git://github.com/chrismason/linuxLinus Torvalds8-22/+62
* 'for-linus' of git://github.com/chrismason/linux: Btrfs: add dummy extent if dst offset excceeds file end in Btrfs: calc file extent num_bytes correctly in file clone btrfs: xattr: fix attribute removal Btrfs: fix wrong nbytes information of the inode Btrfs: fix the file extent gap when doing direct IO Btrfs: fix unclosed transaction handle in btrfs_cont_expand Btrfs: fix misuse of trans block rsv Btrfs: reset to appropriate block rsv after orphan operations Btrfs: skip locking if searching the commit root in csum lookup btrfs: fix warning in iput for bad-inode Btrfs: fix an oops when deleting snapshots
2011-09-12fuse: fix memory leakMiklos Szeredi1-4/+8
kmemleak is reporting that 32 bytes are being leaked by FUSE: unreferenced object 0xe373b270 (size 32): comm "fusermount", pid 1207, jiffies 4294707026 (age 2675.187s) hex dump (first 32 bytes): 01 00 00 00 00 00 00 00 01 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<b05517d7>] kmemleak_alloc+0x27/0x50 [<b0196435>] kmem_cache_alloc+0xc5/0x180 [<b02455be>] fuse_alloc_forget+0x1e/0x20 [<b0245670>] fuse_alloc_inode+0xb0/0xd0 [<b01b1a8c>] alloc_inode+0x1c/0x80 [<b01b290f>] iget5_locked+0x8f/0x1a0 [<b0246022>] fuse_iget+0x72/0x1a0 [<b02461da>] fuse_get_root_inode+0x8a/0x90 [<b02465cf>] fuse_fill_super+0x3ef/0x590 [<b019e56f>] mount_nodev+0x3f/0x90 [<b0244e95>] fuse_mount+0x15/0x20 [<b019d1bc>] mount_fs+0x1c/0xc0 [<b01b5811>] vfs_kern_mount+0x41/0x90 [<b01b5af9>] do_kern_mount+0x39/0xd0 [<b01b7585>] do_mount+0x2e5/0x660 [<b01b7966>] sys_mount+0x66/0xa0 This leak report is consistent and happens once per boot on 3.1.0-rc5-dirty. This happens if a FORGET request is queued after the fuse device was released. Reported-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: Sitsofe Wheeler <sitsofe@yahoo.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-12fuse: fix flock breakageMiklos Szeredi1-0/+3
Commit 37fb3a30b4 ("fuse: fix flock") added in 3.1-rc4 caused flock() to fail with ENOSYS with the kernel ABI version 7.16 or earlier. Fix by falling back to testing FUSE_POSIX_LOCKS for ABI versions 7.16 and earlier. Reported-by: Martin Ziegler <ziegler@email.mathematik.uni-freiburg.de> Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Tested-by: Martin Ziegler <ziegler@email.mathematik.uni-freiburg.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-09-12Merge branch 'for_3.1/pm-fixes-2' of ↵Arnd Bergmann1-0/+3
git://gitorious.org/khilman/linux-omap-pm into fixes
2011-09-12Merge branch 'sirf/fixes' into fixesArnd Bergmann4-0/+4
2011-09-11Merge branch 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linusLinus Torvalds8-93/+49
* 'v4l_for_linus' of git://linuxtv.org/mchehab/for_linus: [media] vp7045: fix buffer setup [media] nuvoton-cir: simplify raw IR sample handling [media] [Resend] viacam: Don't explode if pci_find_bus() returns NULL [media] v4l2: Fix documentation of the codec device controls [media] gspca - sonixj: Fix the darkness of sensor om6802 in 320x240 [media] gspca - sonixj: Fix wrong register mask for sensor om6802 [media] gspca - ov519: Fix LED inversion of some ov519 webcams [media] pwc: precedence bug in pwc_init_controls()
2011-09-11Merge branch 'for-linus' of git://openrisc.net/~jonas/linuxLinus Torvalds4-27/+96
* 'for-linus' of git://openrisc.net/~jonas/linux: Add missing DMA ops openrisc: don't use pt_regs in struct sigcontext
2011-09-11Btrfs: add dummy extent if dst offset excceeds file end inLi Zefan1-0/+6
You can see there's no file extent with range [0, 4096]. Check this by btrfsck: # btrfsck /dev/sda7 root 5 inode 258 errors 100 ... Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11Btrfs: calc file extent num_bytes correctly in file cloneLi Zefan1-3/+10
num_bytes should be 4096 not 12288. Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11btrfs: xattr: fix attribute removalDavid Sterba1-0/+9
An attribute is not removed by 'setfattr -x attr file' and remains visible in attr list. This makes xfstests/062 pass again. Signed-off-by: David Sterba <dsterba@suse.cz> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11Btrfs: fix wrong nbytes information of the inodeMiao Xie1-2/+2
If we write some data into the data hole of the file(no preallocation for this hole), Btrfs will allocate some disk space, and update nbytes of the inode, but the other element--disk_i_size needn't be updated. At this condition, we must update inode metadata though disk_i_size is not changed(btrfs_ordered_update_i_size() return 1). # mkfs.btrfs /dev/sdb1 # mount /dev/sdb1 /mnt # touch /mnt/a # truncate -s 856002 /mnt/a # dd if=/dev/zero of=/mnt/a bs=4K count=1 conv=nocreat,notrunc # umount /mnt # btrfsck /dev/sdb1 root 5 inode 257 errors 400 found 32768 bytes used err is 1 Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
2011-09-11Btrfs: fix the file extent gap when doing direct IOMiao Xie1-6/+10
When we write some data to the place that is beyond the end of the file in direct I/O mode, a data hole will be created. And Btrfs should insert a file extent item that point to this hole into the fs tree. But unfortunately Btrfs forgets doing it. The following is a simple way to reproduce it: # mkfs.btrfs /dev/sdc2 # mount /dev/sdc2 /test4 # touch /test4/a # dd if=/dev/zero of=/test4/a seek=8 count=1 bs=4K oflag=direct conv=nocreat,notrunc # umount /test4 # btrfsck /dev/sdc2 root 5 inode 257 errors 100 Reported-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Miao Xie <miaox@cn.fujitsu.com> Tested-by: Tsutomu Itoh <t-itoh@jp.fujitsu.com> Signed-off-by: Chris Mason <chris.mason@oracle.com>
Powered by cgit, Gruvboxed by Blaster4385.