| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Update machine driver startup, shutdown callback functions to avoid
sound card registration failure on other platforms.
Without this change, platforms with WCD codec is failing to register
sound card.
Fixes: c5198db82d4c ("ASoC: qcom: Add driver support for ALC5682I-VS")
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Co-developed-by: Venkata Prasad Potturu <[email protected]>
Signed-off-by: Venkata Prasad Potturu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
This patch adds dt-bindings information for Analog Devices MAX98396
and MAX98397 Smart Amplifier.
Signed-off-by: Ryan Lee <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
This series of patches adds support for Analog Devices MAX98396
mono amplifier with IV sense. The device provides a PCM interface
for audio data and a standard I2C interface for control data
communication. This driver also supports MAX98397 which is
a variant of MAX98396 with wide input supply range.
Signed-off-by: Ryan Lee <[email protected]>
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The only effect of returning an error code in an i2c remove callback
(compared to returning zero) is that the i2c core emits a generic
warning. The device is still removed.
So even if disabling the regulators fails it's sensible to return zero
to suppress the additional generic and little helpful error message.
This patch is a preparation for making i2c remove callbacks return void.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Check that values written via snd_soc_put_volsw_range() are
within the range advertised by the control, ensuring that we
don't write out of spec values to the hardware.
Signed-off-by: Mark Brown <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Merge series from Pierre-Louis Bossart <[email protected]>:
The SOF CI and daily tests exposed a number of issues with corner
cases on platforms using the HDaudio DAI, such as UpExtreme boards or
usual HDaudio+DMIC laptops.
This patchset provides improvements for pause_push/pause_release,
suspend-resume, mixing use cases and combinations of all three.
The initial patches provide a cleanup, the last patches improve the
state machine and DMA handling.
|
|
Merge series from Peter Ujfalusi <[email protected]>:
The firmware ready (fw_ready) message is sent by the firmware to notify the host
that it has been booted up and caries additional information about it's
configuration.
All of this is IPC specific, the message itself is IPC version specific and the
information itself also.
Move the code to handle the fw_ready message under ipc3.c since the parsing and
interpretation is IPC specific.
A followup series is going to take care of the rest of the loader.c to make it
IPC agnostic.
|
|
Merge series from Richard Fitzgerald <[email protected]>:
This adds SOC_DOUBLE_R_S_EXT_TLV and SOC_SINGLE_S_EXT_TLV macros for
signed TLV controls that need custom get/put callbacks. These will be
needed by future Cirrus codec drivers, but are not particularly exotic
so could be useful for others.
|
|
Merge series from Stephen Kitt <[email protected]>:
This series covers all the remaining changes to migrate
sound/soc/codecs i2c probes to probe_new, where the const struct
i2c_client * argument is still used. Instead of relying on the
parameter passed in, i2c_match_id is used instead.
With this set of patches, all the sound/soc/codecs i2c probes use the
new probe definition.
Changes since v1: two missing files were added.
Stephen Kitt (7):
ASoC: ak*: use i2c_match_id and simple i2c probe
ASoC: alc56*: use i2c_match_id and simple i2c probe
ASoC: max980*: use i2c_match_id and simple i2c probe
ASoC: pcm186x: use i2c_match_id and simple i2c probe
ASoC: tas*: use i2c_match_id and simple i2c probe
ASoC: tlv320*: use i2c_match_id and simple i2c probe
ASoC: tpa6130: use i2c_match_id and simple i2c probe
sound/soc/codecs/ak4613.c | 10 +++++----
sound/soc/codecs/ak4642.c | 8 ++++---
sound/soc/codecs/alc5623.c | 24 +++++++++++----------
sound/soc/codecs/alc5632.c | 20 +++++++++--------
sound/soc/codecs/max98088.c | 21 +++++++++---------
sound/soc/codecs/max98090.c | 23 ++++++++++----------
sound/soc/codecs/max98095.c | 19 +++++++++--------
sound/soc/codecs/pcm186x-i2c.c | 24 ++++++++++-----------
sound/soc/codecs/tas2562.c | 25 +++++++++++-----------
sound/soc/codecs/tas571x.c | 11 ++++++----
sound/soc/codecs/tas5720.c | 21 +++++++++---------
sound/soc/codecs/tlv320adc3xxx.c | 21 +++++++++---------
sound/soc/codecs/tlv320aic31xx.c | 32 ++++++++++++++--------------
sound/soc/codecs/tlv320aic32x4-i2c.c | 11 ++++++----
sound/soc/codecs/tlv320aic3x-i2c.c | 25 +++++++++++-----------
sound/soc/codecs/tpa6130a2.c | 19 +++++++++--------
16 files changed, 168 insertions(+), 146 deletions(-)
base-commit: 5d763a740e5b24e4a2ca04317255e7e941876338
--
2.27.0
|
|
Merge series from Tinghan Shen <[email protected]>:
Add support of MediaTek mt8186 SoC DSP to SOF.
|
|
Add DSP system PM callback for suspend and resume
Signed-off-by: Allen-KH Cheng <[email protected]>
Signed-off-by: Tinghan Shen <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Yaochun Hung <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add adsp clock on/off support on mt8186 SoC.
Signed-off-by: Allen-KH Cheng <[email protected]>
Signed-off-by: Tinghan Shen <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Yaochun Hung <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add mt8186-loader module with ops callback to load and run firmware
on mt8186 SoC.
Signed-off-by: Allen-KH Cheng <[email protected]>
Signed-off-by: Tinghan Shen <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Yaochun Hung <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add support of SOF on Mediatek mt8186 SoC.
MT8186 has 2 Cortex A76 cores paired with 6 Cortex A55 cores.
It also has Cadence HiFi-5 DSP single core. The IPC communication
between AP and DSP is based on shared DRAM and mailbox interrupt.
Signed-off-by: Allen-KH Cheng <[email protected]>
Signed-off-by: Tinghan Shen <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Yaochun Hung <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Minghao Chi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Minghao Chi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Both MCLK and BCLK can be the clock source of sysclk via PLL
according to its datasheet.
This patch sets MCLK as the clock source as we use MCLK in the
previous projects.
Fixes: c5198db82d4c ("ASoC: qcom: Add driver support for ALC5682I-VS")
Signed-off-by: Judy Hsiao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
No need to add null check before call of_node_put(), since the
implementation of of_node_put() has done it.
Signed-off-by: Haowen Bai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
In order to enable NHLT support one must select SND_INTEL_DSP_CONFIG,
which will select SND_INTEL_NHLT. Otherwise the file containing NHLT
code doesn't get build leading to errors when linking.
Fixes: 274d79e51875 ("ASoC: Intel: avs: Configure modules according to their type")
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Cezary Rojewski <[email protected]>
Signed-off-by: Amadeusz Sławiński <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Only supported platform for AVS are x86 machines, so there is no reason
for it to be enabled on other architectures. Allow exception for compile
tests.
Fixes: 274d79e51875 ("ASoC: Intel: avs: Configure modules according to their type")
Reviewed-by: Cezary Rojewski <[email protected]>
Signed-off-by: Amadeusz Sławiński <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Minghao Chi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
pm_runtime_get_sync
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Minghao Chi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Change the order of members in struct cs_dsp_coeff_ctl to avoid
the compiler having to insert alignment padding bytes. On a x86_64
build this saves 16 bytes per control.
- Pointers are collected to the top of the struct (with the exception of
priv, as noted below), so that they are inherently aligned.
- The set and enable bitflags are placed together so they can be merged.
- priv is placed at the end of the struct - it is for use by the
client so it is helpful to make it stand out, and since the compiler
will always pad the struct size to an alignment multiple putting a
pointer last won't introduce any more padding.
- struct cs_dsp_alg_region is placed at the end, right before priv, for
the same reasoning as priv.
Signed-off-by: Richard Fitzgerald <[email protected]>
Reviewed-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The SSI block is identical on Renesas RZ/G2L, RZ/G2UL and RZ/V2L SoC's, so
instead of adding dependency for each SoC's add dependency on ARCH_RZG2L.
The ARCH_RZG2L config option is already selected by ARCH_R9A07G043,
ARCH_R9A07G044 and ARCH_R9A07G054.
Signed-off-by: Biju Das <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Using pm_runtime_resume_and_get() to replace pm_runtime_get_sync and
pm_runtime_put_noidle. This change is just to simplify the code, no
actual functional changes.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: Minghao Chi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
In the context of an i2c probe, i2c_match_id with the module id table
and the probed client never returns null, so removing the null check
on the i2c_device_id pointer is safe.
The i2c id tables are moved up before the probe function, as
suggested by Wolfram Sang, except where the existing code already had
a declaration for the of_device_id table.
Signed-off-by: Stephen Kitt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
The i2c id tables are moved up before the probe function, as
suggested by Wolfram Sang, except where the existing code already had
a declaration for the of_device_id table.
Signed-off-by: Stephen Kitt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
The i2c id table is moved up before the probe function, as suggested
by Wolfram Sang.
Signed-off-by: Stephen Kitt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
In the context of an i2c probe, i2c_match_id with the module id table
and the probed client never returns null, so removing the null check
on the i2c_device_id pointer is safe.
The i2c id tables are moved up before the probe function, as
suggested by Wolfram Sang.
Signed-off-by: Stephen Kitt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
The i2c id tables are moved up before the probe function, as
suggested by Wolfram Sang.
Signed-off-by: Stephen Kitt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
As part of the ongoing i2c transition to the simple probe
("probe_new"), this patch uses i2c_match_id to retrieve the
driver_data for the probed device. The id parameter is thus no longer
necessary and the simple probe can be used instead.
Signed-off-by: Stephen Kitt <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The fw_ready is handled internally to ipc3, we can remove the old code
from the loader.c along with the functions only used by the fw_ready()
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Ajit Pandey <[email protected]>
Reviewed-by: Daniel Baluta <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The fw_ready is handled internally to ipc3 and the callback no longer in
use.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Ajit Pandey <[email protected]>
Reviewed-by: Daniel Baluta <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The fw_ready is handled internally to ipc3 and the callback no longer in
use.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Ajit Pandey <[email protected]>
Reviewed-by: Daniel Baluta <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The fw_ready is handled internally to ipc3 and the callback no longer in
use.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Ajit Pandey <[email protected]>
Reviewed-by: Daniel Baluta <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The fw_ready is handled internally to ipc3, the callback no longer in
use and it is going to be removed.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Ajit Pandey <[email protected]>
Reviewed-by: Daniel Baluta <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The handling of fw_ready is IPC3 specific, move the needed code from the
loader.c to ipc3.c and stop using the sof_ops(sdev)->fw_ready() callback.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Ajit Pandey <[email protected]>
Reviewed-by: Daniel Baluta <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Once we've set-up the HDA stream and its format, we currently don't
support additional format changes. We already have a protection in the
.prepare case, but this needs to be added in the hw_params too.
In mixing use cases where two DPCM FEs are connected to the same BE,
if can happen that there are multiple calls to the BE hw_params when
the two FEs are configured simultaneously.
This could alternatively be fixed at the DPCM level but that's a more
intrusive change requiring infrastructure changes: this would need to
be paired with the definition of fixed hw_params at the mixer level.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
We do the same operations from different places, add a helper to
enforce consistency and make the programming sequences clearer.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The sequences are missing a call to snd_soc_dai_set_dma_data() when
the stream is cleared, as well as a release of the stream, and tests
to avoid pointer dereferences.
This fixes an underflow issue in a corner case with two streams paused
before a suspend-resume cycle. After resume, the pause_release of the
last stream causes an underflow due to an invalid sequence.
This problem probably existed since the beginning and is only see with
prototypes of a 'deep-buffer' capability, which depends on additional
ASoC fixes, so there's is no Fixes: tag and no real requirement to
backport this patch.
BugLink: https://github.com/thesofproject/linux/issues/3151
Co-developed-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add comments and re-align with the TRIGGER_SUSPEND case with an
additional call to hda_dai_hw_free_ipc() to free-up resources.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The location of the code was not optimal and prevents us from using
helpers, let's move it to hda-dai.c.
No functionality change in this patch.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
We do the same thing from different places, let's use a helper.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Before suspending, walk through all the widgets to make sure all
refcounts are zero. If not, the resume will not work and random errors
will be reported. Adding this paranoia check will help identify leaks
and broken sequences.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Just code move with no functionality change, to clearly separate out
the 'dai' operation from the link DMA ones.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The link DMA state management is handled completely on the host side,
while the DAI operations require an IPC. Split the first part in
dedicated helpers.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Use helper instead of open-coding the same thing multiple times.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
the argument "struct sof_intel_hda_stream *hda_stream" is not used, remove.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The Intel documentation refers to the concepts of 'HDAudio host
DMA' (system memory <--> DSP) and 'HDaudio link DMA' (DSP <-->
peripherals). We currently use the prefix 'hda_link' to describe DAI
operations, which can be confused for dailink operations.
Since the topology tokens refer unambiguously to the 'HDA' dai, let's
drop the link prefix for dai-related ops/callbacks. Conversely let's
use 'hda_link_dma' for routines related to the DMA management. In a
follow-up patch we will introduce the 'hda_dai_link' prefix for dailink
ops/callbacks.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The BE DAI driver ops involve operations that are IPC-specific. For ex:
for the HDA DAI, the trigger op involves sending the DAI_CONFIG IPC to
the DSP to stop the DMA for the stop/pause commands. This sequence is
different for IPC3 and IPC4. So, make the dai driver ops IPC-specific
and set the IPC3-specific ops during the ops_init() callback.
Reviewed-by: Rander Wang <[email protected]>
Reviewed-by: Bard Liao <[email protected]>
Reviewed-by: Péter Ujfalusi <[email protected]>
Signed-off-by: Ranjani Sridharan <[email protected]>
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|