| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Convert the tables to make use of ETHTOOL link mode bits, rather than
the old u32 SUPPORTED speeds. Make use of the linkmode helps to set
bits and compare linkmodes. As a result, the _u32 members of keee are
no longer used, a step towards removing them.
Signed-off-by: Andrew Lunn <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Make use of the existing linkmode helpers for bit manipulation of EEE
advertise, support and link partner support. The aim is to drop the
restricted _u32 variants in the near future.
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Signed-off-by: Andrew Lunn <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Make use of the existing linkmode helpers for converting PHY EEE
register values into links modes, now that ethtool_keee uses link
modes, rather than u32 values.
Rework determining if EEE is active to make is similar as to how
phylib decides, and make use of a phylib helper to validate if EEE is
valid in for the current link mode. This then requires that PHYLIB is
selected.
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The input parameter 'level' in rawv6_get/seticmpfilter is not used.
Therefore, remove it.
Signed-off-by: Zhengchao Shao <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The fast path usage breakdown describes the detail for 'inet_sock', fix
the markup title.
Signed-off-by: Haiyue Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently when suspending driver and stopping workqueue it is checked whether
workqueue is not NULL and if so, it is destroyed.
Function destroy_workqueue() does drain queue and does clear variable, but
it does not set workqueue variable to NULL. This can cause kernel/module
panic if code attempts to clear workqueue that was not initialized.
This scenario is possible when resuming suspended driver in stmmac_resume(),
because there is no handling for failed stmmac_hw_setup(),
which can fail and return if DMA engine has failed to initialize,
and workqueue is initialized after DMA engine.
Should DMA engine fail to initialize, resume will proceed normally,
but interface won't work and TX queue will eventually timeout,
causing 'Reset adapter' error.
This then does destroy workqueue during reset process.
And since workqueue is initialized after DMA engine and can be skipped,
it will cause kernel/module panic.
To secure against this possible crash, set workqueue variable to NULL when
destroying workqueue.
Log/backtrace from crash goes as follows:
[88.031977]------------[ cut here ]------------
[88.031985]NETDEV WATCHDOG: eth0 (sxgmac): transmit queue 1 timed out
[88.032017]WARNING: CPU: 0 PID: 0 at net/sched/sch_generic.c:477 dev_watchdog+0x390/0x398
<Skipping backtrace for watchdog timeout>
[88.032251]---[ end trace e70de432e4d5c2c0 ]---
[88.032282]sxgmac 16d88000.ethernet eth0: Reset adapter.
[88.036359]------------[ cut here ]------------
[88.036519]Call trace:
[88.036523] flush_workqueue+0x3e4/0x430
[88.036528] drain_workqueue+0xc4/0x160
[88.036533] destroy_workqueue+0x40/0x270
[88.036537] stmmac_fpe_stop_wq+0x4c/0x70
[88.036541] stmmac_release+0x278/0x280
[88.036546] __dev_close_many+0xcc/0x158
[88.036551] dev_close_many+0xbc/0x190
[88.036555] dev_close.part.0+0x70/0xc0
[88.036560] dev_close+0x24/0x30
[88.036564] stmmac_service_task+0x110/0x140
[88.036569] process_one_work+0x1d8/0x4a0
[88.036573] worker_thread+0x54/0x408
[88.036578] kthread+0x164/0x170
[88.036583] ret_from_fork+0x10/0x20
[88.036588]---[ end trace e70de432e4d5c2c1 ]---
[88.036597]Unable to handle kernel NULL pointer dereference at virtual address 0000000000000004
Fixes: 5a5586112b929 ("net: stmmac: support FPE link partner hand-shaking procedure")
Signed-off-by: Jakub Raczynski <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Correct type in the hsr_forward_do() comment.
Signed-off-by: Lukasz Majewski <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Updating link clock rate for different speeds is only needed when
using RGMII, as that mode requires changing clock speed when the link
speed changes. Let's restrict updating the link clock speed in
ethqos_update_link_clk() to just RGMII. Other modes such as SGMII
only need to enable the link clock (which is already done in probe).
Signed-off-by: Sarosh Hasan <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Reviewed-by: Andrew Halaney <[email protected]>
Tested-by: Andrew Halaney <[email protected]> # sa8775p-ride
Reviewed-by: Abhishek Chauhan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Justin Iurman says:
====================
ioam6: netlink multicast event
v5:
- remove the "must be the destination" check before sending an ioam6
event
v4:
- rebase on top of net merge
v3:
- patchset was mistakenly superseded due to same cover title used for
iproute2-next equivalent patch -> resend (renamed)
v2:
- fix warnings
Add generic netlink multicast event support to ioam6 as another solution
to share IOAM data with user space. The other one being via IPv6 raw
sockets combined with ancillary data (or packet socket, if the listener
does not need the processing of the IOAM Option-Type, since the hook is
before in that case). This patchset focuses on the IOAM Pre-allocated
Trace (the only Option-Type currently supported in the kernel), and so
on IOAM "trace" events. See an example of a consumer here [1].
[1] https://github.com/Advanced-Observability/ioam-agent-python/blob/netlink_event/ioam-agent.py
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
If we're processing an IOAM Pre-allocated Trace Option-Type (the only
one supported currently), then send the trace as an ioam6 event to the
netlink multicast group. This way, user space apps will be able to
collect IOAM data.
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Justin Iurman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add a multicast group to the ioam6 generic netlink family and provide
ioam6_event() to send an ioam6 event to the multicast group.
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Justin Iurman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add new api to support ioam6 events for generic netlink multicast. A
first "trace" event is added to the list of ioam6 events, which will
represent an IOAM Pre-allocated Trace Option-Type. It provides another
solution to share IOAM data with user space.
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: Justin Iurman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
dtschema defines label as string, so $ref in other bindings is
redundant.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In a previous patch I added "select PHYLIB" at the wrong place for the
ADIN1110 driver symbol, so move it to its correct place under the
ADIN1110 kconfig symbol.
Fixes: a9f80df4f514 ("net: ethernet: adi: requires PHYLIB support")
Signed-off-by: Randy Dunlap <[email protected]>
Reported-by: Michal Kubecek <[email protected]>
Closes: https://lore.kernel.org/lkml/[email protected]/T/#m8ba397484738711edc0ad607b2c63ca02244e3c3
Cc: Lennart Franzen <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Eric Dumazet <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Paolo Abeni <[email protected]>
Cc: [email protected]
Cc: Nuno Sa <[email protected]>
Tested-by: Michal Kubecek <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Jason Xing says:
====================
introduce drop reasons for tcp receive path
When I was debugging the reason about why the skb should be dropped in
syn cookie mode, I found out that this NOT_SPECIFIED reason is too
general. Thus I decided to refine it.
v10
Link: https://lore.kernel.org/netdev/[email protected]/
1. fix three nit problems (Kuniyuki)
2. add reviewed-by tag (Kuniyuki)
v9
Link: https://lore.kernel.org/netdev/[email protected]/
1. nit: remove one unneeded 'else' (David)
2. add reviewed-by tags (Eric, David)
v8
Link: https://lore.kernel.org/netdev/[email protected]/
1. refine part of codes in patch [03/10] and patch [10/10] (Eric)
2. squash patch [11/11] in the last version into patch [10/11] (Eric)
3. add reviewed-by tags (Eric)
v7
Link: https://lore.kernel.org/all/[email protected]/
1. fix some misspelled problem (Kuniyuki)
2. remove redundant codes in tcp_v6_do_rcv() (Kuniyuki)
3. add reviewed-by tag in patch [02/11] (Kuniyuki)
v6
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lore.kernel.org/all/CAL+tcoAgSjwsmFnDh_Gs9ZgMi-y5awtVx+4VhJPNRADjo7LLSA@mail.gmail.com/
1. Take one case into consideration in tcp_v6_do_rcv(), behave like old
days, or else it will trigger errors (Paolo).
2. Extend NO_SOCKET reason to consider two more reasons for request
socket and child socket.
v5:
Link: https://lore.kernel.org/netdev/[email protected]/
Link: https://lore.kernel.org/netdev/[email protected]/
1. Use SKB_DROP_REASON_IP_OUTNOROUTES instead of introducing a new
one (Eric, David)
2. Reuse SKB_DROP_REASON_NOMEM to handle failure of request socket
allocation (Eric)
3. Reuse NO_SOCKET instead of introducing COOKIE_NOCHILD
4. avoid duplication of these opt_skb tests/actions (Eric)
5. Use new name (TCP_ABORT_ON_DATA) for readability (David)
6. Reuse IP_OUTNOROUTES instead of INVALID_DST (Eric)
---
HISTORY
This series is combined with 2 series sent before suggested by Jakub. So
I'm going to separately write changelogs for each of them.
PATCH 1/11 - 5/11
preivious Link: https://lore.kernel.org/netdev/[email protected]/
Summary
1. introduce all the dropreasons we need, [1/11] patch.
2. use new dropreasons in ipv4 cookie check, [2/11],[3/11] patch.
3. use new dropreasons ipv6 cookie check, [4/11],[5/11] patch.
v4:
Link: https://lore.kernel.org/netdev/[email protected]/
1. Fix misspelled name in Kdoc as suggested by Jakub.
v3:
Link: https://lore.kernel.org/all/CANn89iK40SoyJ8fS2U5kp3pDruo=zfQNPL-ppOF+LYaS9z-MVA@mail.gmail.com/
1. Split that patch into some smaller ones as suggested by Eric.
v2:
Link: https://lore.kernel.org/all/[email protected]/
1. change the title of 2/2 patch.
2. fix some warnings checkpatch tool showed before.
3. use return value instead of adding more parameters suggested by Eric.
PATCH 6/11 - 11/11
previous Link: https://lore.kernel.org/netdev/[email protected]/
v4:
Link: https://lore.kernel.org/netdev/CANn89iJar+H3XkQ8HpsirH7b-_sbFe9NBUdAAO3pNJK3CKr_bg@mail.gmail.com/
Link: https://lore.kernel.org/netdev/[email protected]/
Already got rid of @acceptable in tcp_rcv_state_process(), so I need to
remove *TCP_CONNREQNOTACCEPTABLE related codes which I wrote in the v3
series.
v3:
Link: https://lore.kernel.org/all/CANn89iK40SoyJ8fS2U5kp3pDruo=zfQNPL-ppOF+LYaS9z-MVA@mail.gmail.com/
1. Split that patch into some smaller ones as suggested by Eric.
v2:
Link: https://lore.kernel.org/all/[email protected]/
1. change the title of 2/2 patch.
2. fix some warnings checkpatch tool showed before.
3. use return value instead of adding more parameters suggested by Eric.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
It's time to let it work right now. We've already prepared for this:)
Signed-off-by: Jason Xing <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Update three callers including both ipv4 and ipv6 and let the dropreason
mechanism work in reality.
Signed-off-by: Jason Xing <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In this patch, I equipped this function with more dropreasons, but
it still doesn't work yet, which I will do later.
Signed-off-by: Jason Xing <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch does two things:
1) add two more new reasons
2) only change the return value(1) to various drop reason values
for the future use
For now, we still cannot trace those two reasons. We'll implement the full
function in the subsequent patch in this series.
Signed-off-by: Jason Xing <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Soon later patches can use these relatively more accurate
reasons to recognise and find out the cause.
Signed-off-by: Jason Xing <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Like what I did to ipv4 mode, refine this part: adding more drop
reasons for better tracing.
Signed-off-by: Jason Xing <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Like previous patch does, only moving skb drop logical code to
cookie_v6_check() for later refinement.
Signed-off-by: Jason Xing <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Now it's time to use the prepared definitions to refine this part.
Four reasons used might enough for now, I think.
Signed-off-by: Jason Xing <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Only move the skb drop from tcp_v4_do_rcv() to cookie_v4_check() itself,
no other changes made. It can help us refine the specific drop reasons
later.
Signed-off-by: Jason Xing <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Adding one drop reason to detect the condition of skb dropped
because of hook points in cookie check and extending NO_SOCKET
to consider another two cases can be used later.
Signed-off-by: Jason Xing <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: David Ahern <[email protected]>
Reviewed-by: Kuniyuki Iwashima <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch adds /proc/sys/net/core/mem_pcpu_rsv sysctl file,
to make SK_MEMORY_PCPU_RESERV tunable.
Commit 3cd3399dd7a8 ("net: implement per-cpu reserves for
memory_allocated") introduced per-cpu forward alloc cache:
"Implement a per-cpu cache of +1/-1 MB, to reduce number
of changes to sk->sk_prot->memory_allocated, which
would otherwise be cause of false sharing."
sk_prot->memory_allocated points to global atomic variable:
atomic_long_t tcp_memory_allocated ____cacheline_aligned_in_smp;
If increasing the per-cpu cache size from 1MB to e.g. 16MB,
changes to sk->sk_prot->memory_allocated can be further reduced.
Performance may be improved on system with many cores.
Signed-off-by: Adam Li <[email protected]>
Reviewed-by: Christoph Lameter (Ampere) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Luiz Angelo Daros de Luca says:
====================
net: dsa: realtek: support reset controller and update docs
The driver previously supported reset pins using GPIO, but it lacked
support for reset controllers. Although a reset method is generally not
required, the driver fails to detect the switch if the reset was kept
asserted by a previous driver.
This series adds support to reset a Realtek switch using a reset
controller. It also updates the binding documentation to remove the
requirement of a reset method and to add the new reset controller
property.
It was tested on a TL-WR1043ND v1 router (rtl8366rb via SMI).
Signed-off-by: Luiz Angelo Daros de Luca <[email protected]>
---
Changes in v5:
- Fixed error checking logic when reset controller (de)assert fails
- Link to v4: https://lore.kernel.org/r/[email protected]
Changes in v4:
- do not test for priv->reset,priv->reset_ctl
- updated commit message
- Link to v3: https://lore.kernel.org/r/[email protected]
Changes in v3:
- Rebased on the Realtek DSA driver refactoring (08f627164126)
- Dropped the reset controller example in bindings
- Used %pe in error printing
- Linked to v2: https://lore.kernel.org/r/[email protected]/
Changes in v2:
- Introduced a dedicated commit for removing the reset-gpios requirement
- Placed binding patches before code changes
- Removed the 'reset-names' property
- Moved the example from the commit message to realtek.yaml
- Split the reset function into _assert/_deassert variants
- Modified reset functions to return a warning instead of a value
- Utilized devm_reset_control_get_optional to prevent failure when the
reset control is missing
- Used 'true' and 'false' for boolean values
- Removed the CONFIG_RESET_CONTROLLER check as stub methods are
sufficient when undefined
- Linked to v1: https://lore.kernel.org/r/[email protected]/
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Add support for resetting the device using a reset controller,
complementing the existing GPIO reset functionality (reset-gpios).
Although the reset is optional and the driver performs a soft reset
during setup, if the initial reset pin state was asserted, the driver
will not detect the device until the reset is deasserted.
Signed-off-by: Luiz Angelo Daros de Luca <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Alvin Šipraga <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Realtek switches can use a reset controller instead of reset-gpios.
Signed-off-by: Luiz Angelo Daros de Luca <[email protected]>
Cc: [email protected]
Acked-by: Arınç ÜNAL <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Alvin Šipraga <[email protected]>
Acked-by: Rob Herring <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The 'reset-gpios' should not be mandatory. although they might be
required for some devices if the switch reset was left asserted by a
previous driver, such as the bootloader.
Signed-off-by: Luiz Angelo Daros de Luca <[email protected]>
Cc: [email protected]
Acked-by: Arınç ÜNAL <[email protected]>
Acked-by: Rob Herring <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Reviewed-by: Alvin Šipraga <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Kalle Valo says:
====================
wireless fixes for v6.8-rc7
Few remaining fixes, hopefully the last wireless pull request to v6.8.
Two fixes to the stack and two to iwlwifi but no high priority fixes
this time.
* tag 'wireless-2024-02-27' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: mac80211: only call drv_sta_rc_update for uploaded stations
MAINTAINERS: wifi: Add N: ath1*k entries to match .yaml files
MAINTAINERS: wifi: update Jeff Johnson e-mail address
wifi: iwlwifi: mvm: fix the TXF mapping for BZ devices
wifi: iwlwifi: mvm: ensure offloading TID queue exists
wifi: nl80211: reject iftype change with mesh ID change
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Not really a fix per se, but IPV6_TLV_IOAM is still tagged as "TEMPORARY
IANA allocation for IOAM", while RFC 9486 is available for some time
now. Just update the reference.
Fixes: 9ee11f0fff20 ("ipv6: ioam: Data plane support for Pre-allocated Trace")
Signed-off-by: Justin Iurman <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Disable BH around the call to napi_schedule() to avoid following
error:
NOHZ tick-stop error: local softirq work is pending, handler #08!!!
Fixes: ec4c7e12396b ("lan78xx: Introduce NAPI polling support")
Signed-off-by: Oleksij Rempel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Replace macro MAC_ADDRESS_EQUAL() for null_mac_addr checking with inline
function__agg_has_partner(). When MAC_ADDRESS_EQUAL() is verifiying
aggregator's partner mac addr with null_mac_addr, means that seeing if
aggregator has a valid partner or not. Using __agg_has_partner() makes it
more clear to understand.
In ad_port_selection_logic(), since aggregator->partner_system and
port->partner_oper.system has been compared first as a prerequisite, it is
safe to replace the upcoming MAC_ADDRESS_EQUAL() for null_mac_addr checking
with __agg_has_partner().
Delete null_mac_addr, which is not required anymore in bond_3ad.c, since
all references to it are gone.
Signed-off-by: Jones Syue <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Acked-by: Jay Vosburgh <[email protected]>
Link: https://lore.kernel.org/r/SI2PR04MB5097BCA8FF2A2F03D9A5A3EEDC5A2@SI2PR04MB5097.apcprd04.prod.outlook.com
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Currently using plain XDP/ZC sockets on stmmac results in a kernel crash:
|[ 255.822584] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000
|[...]
|[ 255.822764] Call trace:
|[ 255.822766] stmmac_tx_clean.constprop.0+0x848/0xc38
The program counter indicates xsk_tx_metadata_complete(). It works on
compl->tx_timestamp, which is not set by xsk_tx_metadata_to_compl() due to
missing meta data. Therefore, call xsk_tx_metadata_complete() only when
meta data is actually used.
Tested on imx93 without XDP, with XDP and with XDP/ZC.
Fixes: 1347b419318d ("net: stmmac: Add Tx HWTS support to XDP ZC")
Suggested-by: Serge Semin <[email protected]>
Tested-by: Serge Semin <[email protected]>
Link: https://lore.kernel.org/netdev/[email protected]/
Acked-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Kurt Kanzenbach <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The MII code does not check the return value of mdio_read (among
others), and therefore no error code should be sent. A previous fix to
the use of an uninitialized variable propagates negative error codes,
that might lead to wrong operations by the MII library.
An example of such issues is the use of mii_nway_restart by the dm9601
driver. The mii_nway_restart function does not check the value returned
by mdio_read, which in this case might be a negative number which could
contain the exact bit the function checks (BMCR_ANENABLE = 0x1000).
Return zero in case of error, as it is common practice in users of
mdio_read to avoid wrong uses of the return value.
Fixes: 8f8abb863fa5 ("net: usb: dm9601: fix uninitialized variable use in dm9601_mdio_read")
Signed-off-by: Javier Carrasco <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Reviewed-by: Peter Korsgaard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
This is an effort to get rid of all multiplications from allocation
functions in order to prevent integer overflows [1][2].
As the "port_prox" variable is a pointer to "struct port_proxy" and
this structure ends in a flexible array:
struct port_proxy {
[...]
struct t7xx_port ports[];
};
the preferred way in the kernel is to use the struct_size() helper to
do the arithmetic instead of the argument "size + size * count" in the
devm_kzalloc() function.
This way, the code is more readable and safer.
Link: https://www.kernel.org/doc/html/latest/process/deprecated.html#open-coded-arithmetic-in-allocator-arguments [1]
Link: https://github.com/KSPP/linux/issues/160 [2]
Signed-off-by: Erick Archer <[email protected]>
Reviewed-by: Sergey Ryazanov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The input parameter 'opt' in rawv6_err() is not used. Therefore, remove it.
Signed-off-by: Zhengchao Shao <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull lsm fixes from Paul Moore:
"Two small patches, one for AppArmor and one for SELinux, to fix
potential uninitialized variable problems in the new LSM syscalls we
added during the v6.8 merge window.
We haven't been able to get a response from John on the AppArmor
patch, but considering both the importance of the patch and it's
rather simple nature it seems like a good idea to get this merged
sooner rather than later.
I'm sure John is just taking some much needed vacation; if we need to
revise this when he gets back to his email we can"
* tag 'lsm-pr-20240227' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
apparmor: fix lsm_get_self_attr()
selinux: fix lsm_get_self_attr()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull misc fixes from Andrew Morton:
"Six hotfixes. Three are cc:stable and the remainder address post-6.7
issues or aren't considered appropriate for backporting"
* tag 'mm-hotfixes-stable-2024-02-27-14-52' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/debug_vm_pgtable: fix BUG_ON with pud advanced test
mm: cachestat: fix folio read-after-free in cache walk
MAINTAINERS: add memory mapping entry with reviewers
mm/vmscan: fix a bug calling wakeup_kswapd() with a wrong zone index
kasan: revert eviction of stack traces in generic mode
stackdepot: use variable size records for non-evictable entries
|
|
This is a followup of commit 234ec0b6034b ("netlink: fix potential
sleeping issue in mqueue_flush_file"), because vfree_atomic()
overhead is unfortunate for medium sized allocations.
1) If the allocation is smaller than PAGE_SIZE, do not bother
with vmalloc() at all. Some arches have 64KB PAGE_SIZE,
while NLMSG_GOODSIZE is smaller than 8KB.
2) Use kvmalloc(), which might allocate one high order page
instead of vmalloc if memory is not too fragmented.
Signed-off-by: Eric Dumazet <[email protected]>
Reviewed-by: Zhengchao Shao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
bnxt_alloc_mem() dereferences ::vnic_info in the variable declaration
block, but allocates it much later. As a result, the following crash
happens on my setup:
BUG: kernel NULL pointer dereference, address: 0000000000000090
fbcon: Taking over console
#PF: supervisor write access in kernel mode
#PF: error_code (0x0002) - not-present page
PGD 12f382067 P4D 0
Oops: 8002 [#1] PREEMPT SMP NOPTI
CPU: 47 PID: 2516 Comm: NetworkManager Not tainted 6.8.0-rc5-libeth+ #49
Hardware name: Intel Corporation M50CYP2SBSTD/M58CYP2SBSTD, BIOS SE5C620.86B.01.01.0088.2305172341 05/17/2023
RIP: 0010:bnxt_alloc_mem+0x1609/0x1910 [bnxt_en]
Code: 81 c8 48 83 c8 08 31 c9 e9 d7 fe ff ff c7 44 24 Oc 00 00 00 00 49 89 d5 e9 2d fe ff ff 41 89 c6 e9 88 00 00 00 48 8b 44 24 50 <80> 88 90 00 00 00 Od 8b 43 74 a8 02 75 1e f6 83 14 02 00 00 80 74
RSP: 0018:ff3f25580f3432c8 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ff15a5cfc45249e0 RCX: 0000002079777000
RDX: ff15a5dfb9767000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: ff15a5dfb9777000 R11: ffffff8000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000020 R15: ff15a5cfce34f540
FS: 000007fb9a160500(0000) GS:ff15a5dfbefc0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CRO: 0000000080050033
CR2: 0000000000000090 CR3: 0000000109efc00Z CR4: 0000000000771ef0
DR0: 0000000000000000 DR1: 0000000000000000 DRZ: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
? __die_body+0x68/0xb0
? page_fault_oops+0x3a6/0x400
? exc_page_fault+0x7a/0x1b0
? asm_exc_page_fault+0x26/8x30
? bnxt_alloc_mem+0x1609/0x1910 [bnxt_en]
? bnxt_alloc_mem+0x1389/8x1918 [bnxt_en]
_bnxt_open_nic+0x198/0xa50 [bnxt_en]
? bnxt_hurm_if_change+0x287/0x3d0 [bnxt_en]
bnxt_open+0xeb/0x1b0 [bnxt_en]
_dev_open+0x12e/0x1f0
_dev_change_flags+0xb0/0x200
dev_change_flags+0x25/0x60
do_setlink+0x463/0x1260
? sock_def_readable+0x14/0xc0
? rtnl_getlink+0x4b9/0x590
? _nla_validate_parse+0x91/0xfa0
rtnl_newlink+0xbac/0xe40
<...>
Don't create a variable and dereference the first array member directly
since it's used only once in the code.
Fixes: ef4ee64e9990 ("bnxt_en: Define BNXT_VNIC_DEFAULT for the default vnic index")
Signed-off-by: Alexander Lobakin <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Reviewed-by: Michael Chan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Commit 6151ff9c7521 ("selftests: netdevsim: use suitable existing dummy
file for flash test") introduced a nice trick to the devlink flashing
test. Instead of user having to create a file under /lib/firmware
we just pick the first one that already exists.
Sadly, in AWS Linux there are no files directly under /lib/firmware,
only in subdirectories. Don't limit the search to -maxdepth 1.
We can use the %P print format to get the correct path for files
inside subdirectories:
$ find /lib/firmware -type f -printf '%P\n' | head -1
intel-ucode/06-1a-05
The full path is /lib/firmware/intel-ucode/06-1a-05
This works in GNU find, busybox doesn't have printf at all,
so we're not making it worse.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
struct veth_rq is pretty large, 832B total without debug
options enabled. Since commit under Fixes we try to pre-allocate
enough queues for every possible CPU. Miao Wang reports that
this may lead to order-5 allocations which will fail in production.
Let the allocation fallback to vmalloc() and try harder.
These are the same flags we pass to netdev queue allocation.
Reported-and-tested-by: Miao Wang <[email protected]>
Fixes: 9d3684c24a52 ("veth: create by default nr_possible_cpus queues")
Link: https://lore.kernel.org/all/[email protected]/
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Eric Dumazet <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
One patch of a series of three that was sent fixing issues with the
ppc4xx driver was targeted at -next, unfortunately it being sandwiched
between two others that targeted mainline tripped up my workflow and
caused it to get merged along with the others. The ppc4xx driver is
only buildable in very limited configurations so none of the CI catches
issues with it.
Fixes: de4af897ddf2 ("spi: ppc4xx: Fix fallout from rename in struct spi_bitbang")
Signed-off-by: Mark Brown <[email protected]>
|
|
Shannon Nelson says:
====================
ionic: PCI error handling fixes
These are a few things to make our PCI reset handling better.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>
|
|
When rebuilding the lif after an FLR, be sure to restore the
current netdev features, not do the usual first time feature
init. This prevents losing user changes to things like TSO
or vlan tagging states.
Fixes: 45b84188a0a4 ("ionic: keep filters across FLR")
Reviewed-by: Brett Creeley <[email protected]>
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
Since we now have potential cases of NULL cmd_regs and info_regs
during a reset recovery, and left NULL if a reset recovery has
failed, we need to check that they exist before we use them.
Most of the cases were covered in the original patch where we
verify before doing the ioreadb() for health or cmd status.
However, we need to protect a few uses of io mem that could
be hit in error recovery or asynchronous threads calls as well
(e.g. ethtool or devlink handlers).
Fixes: 219e183272b4 ("ionic: no fw read when PCI reset failed")
Reviewed-by: Brett Creeley <[email protected]>
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|
|
AER recovery handler can trigger a PCI Reset after tearing
down the device setup in the error detection handler. The PCI
Reset handler will also attempt to tear down the device setup,
and this second tear down needs to know that it doesn't need
to call pci_release_regions() a second time. We can clear
num_bars on tear down and use that to decide later if we need
to clear the resources. This prevents a harmless but disturbing
warning message
resource: Trying to free nonexistent resource <0xXXXXXXXXXX-0xXXXXXXXXXX>
Fixes: c3a910e1c47a ("ionic: fill out pci error handlers")
Reviewed-by: Brett Creeley <[email protected]>
Signed-off-by: Shannon Nelson <[email protected]>
Signed-off-by: Paolo Abeni <[email protected]>
|