aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2011-05-08tcp_cubic: limit delayed_ack ratio to prevent divide errorstephen hemminger1-2/+7
TCP Cubic keeps a metric that estimates the amount of delayed acknowledgements to use in adjusting the window. If an abnormally large number of packets are acknowledged at once, then the update could wrap and reach zero. This kind of ACK could only happen when there was a large window and huge number of ACK's were lost. This patch limits the value of delayed ack ratio. The choice of 32 is just a conservative value since normally it should be range of 1 to 4 packets. Signed-off-by: Stephen Hemminger <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-05-08ipheth: Properly distinguish length and alignment in URBs and skbsBen Hutchings1-5/+9
The USB protocol this driver implements appears to require 2 bytes of padding in front of each received packet. This used to be equal to the value of NET_IP_ALIGN on x86, so the driver abused that constant and mostly worked, but this is no longer the case. The driver also mixed up the URB and packet lengths, resulting in 2 bytes of junk at the end of the skb. Introduce a private constant for the 2 bytes of padding; fix this confusion and check for the under-length case. Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-05-09drm/nouveau: Fix a crash at card takedown for NV40 and older cardsJimmy Rentz2-2/+5
NV40 and older cards (pre NV50) reserve a vram bo for the vga memory at card init. This bo is then freed at card shutdown. The problem is that the ttm bo vram manager was already freed. So a crash occurs when the vga bo is freed. The fix is to free the vga bo prior to freeing the ttm bo vram manager. There might be other solutions but this seemed the simplest to me. Signed-off-by: Jimmy Rentz <[email protected]> Signed-off-by: Ben Skeggs <[email protected]>
2011-05-08ASoC: UDA134x: Remove POWER_OFF_ON_STANDBY define.Marek Belisko1-2/+0
Define POWER_OFF_ON_STANDBY cause trobles when trying to get some sound from codec because code for bias setup was not compiled (define wasn't defined). This define was removed in commit: cc3202f5 but again introduced by commit: f0fba2ad1 which then completely break codec functionality so remove it again. Signed-off-by: Marek Belisko <[email protected]> Acked-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]> Cc: [email protected]
2011-05-08ASoC: SSM2602: Fix reg_cache_sizeLars-Peter Clausen1-1/+1
reg_cache_size is supposed to be the number of elements in the register cache, not the size in bytes. Signed-off-by: Lars-Peter Clausen <[email protected]> Acked-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2011-05-08ASoC: SSM2602: Fix 'Mic Boost2' controlLars-Peter Clausen1-1/+1
The 'Mic Boost2' control's shift was off by one and thus was not working. Signed-off-by: Lars-Peter Clausen <[email protected]> Acked-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]> Cc: [email protected]
2011-05-08ASoC: SSM2602: Properly annotate i2c probe and remove functionsLars-Peter Clausen1-3/+3
Annotate the i2c probe and remove functions with __devinit and __devexit. Signed-off-by: Lars-Peter Clausen <[email protected]> Acked-by: Liam Girdwood <[email protected]> Signed-off-by: Mark Brown <[email protected]>
2011-05-07Merge branch 'perf-fixes-for-linus' of ↵Linus Torvalds10-54/+144
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: perf tools: Makefile: Use gcc to determine ARCH perf events, x86: Fix Intel Nehalem and Westmere last level cache event definitions hw_breakpoints, powerpc: Fix CONFIG_HAVE_HW_BREAKPOINT off-case in ptrace_set_debugreg() sh, hw_breakpoints: Fix racy access to ptrace breakpoints arm, hw_breakpoints: Fix racy access to ptrace breakpoints powerpc, hw_breakpoints: Fix racy access to ptrace breakpoints x86, hw_breakpoints: Fix racy access to ptrace breakpoints ptrace: Prepare to fix racy accesses on task breakpoints
2011-05-07perf tools: Makefile: Use gcc to determine ARCHLin Ming1-6/+10
The original Makefile uses "uname -m" to determine ARCH. This causes problem on x86 when compile perf tool on 32 bit userspace with a 64 bit kernel. bench/../../../arch/x86/lib/memcpy_64.S: Assembler messages: bench/../../../arch/x86/lib/memcpy_64.S:28: Error: bad register name `%rdi' This is because "uname -m" returns x86_64 and memcpy_64.S is included in 32 bit build. Reported-by: Riccardo Magliocchetti <[email protected]> Signed-off-by: Lin Ming <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Link: http://lkml.kernel.org/r/1304743274.3132.17.camel@localhost Signed-off-by: Ingo Molnar <[email protected]>
2011-05-07Merge first four commits of 'zImage_fixes' of ↵Russell King3-12/+26
git://git.linaro.org/people/nico/linux into fixes
2011-05-07ARM: zImage: the page table memory must be considered before relocationNicolas Pitre1-1/+2
For correctness, the initial page table located right before the decompressed kernel should be considered when determining if relocation is required. Signed-off-by: Nicolas Pitre <[email protected]> Tested-by: Shawn Guo <[email protected]> Acked-by: Tony Lindgren <[email protected]>
2011-05-07ARM: zImage: make sure not to relocate on top of the relocation codeNicolas Pitre1-10/+17
If the zImage load address is slightly below the relocation address, there is a risk for the copied data to overwrite the copy loop or cache flush code that the relocation process requires. Always bump the relocation address by the size of that code to avoid this issue. Noticed by Tony Lindgren <[email protected]>. While at it, let's start the copy from the restart symbol which makes the above code size computation possible by the assembler directly (same sections), given that we don't need to preserve the code before that point anyway. And therefore we don't need to carry the _start pointer in r5 anymore. Signed-off-by: Nicolas Pitre <[email protected]> Tested-by: Tony Lindgren <[email protected]>
2011-05-06ARM: zImage: Fix bad SP address after relocating kernelTony Lindgren1-0/+5
Otherwise cache_clean_flush can overwrite some of the relocated area depending on where the kernel image gets loaded. This fixes booting on n900 after commit 6d7d0ae51574943bf571d269da3243257a2d15db (ARM: 6750/1: improvements to compressed/head.S). Thanks to Aaro Koskinen <[email protected]> for debugging the address of the relocated area that gets corrupted, and to Nicolas Pitre <[email protected]> for the other uncompress related fixes. Signed-off-by: Tony Lindgren <[email protected]> Signed-off-by: Nicolas Pitre <[email protected]>
2011-05-06ARM: zImage: make sure the stack is 64-bit alignedNicolas Pitre2-1/+2
With ARMv5+ and EABI, the compiler expects a 64-bit aligned stack so instructions like STRD and LDRD can be used. Without this, mysterious boot failures were seen semi randomly with the LZMA decompressor. While at it, let's align .bss as well. Signed-off-by: Nicolas Pitre <[email protected]> Tested-by: Shawn Guo <[email protected]> Acked-by: Tony Lindgren <[email protected]> CC: [email protected]
2011-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6Linus Torvalds2-68/+71
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: cifs: handle errors from coalesce_t2 cifs: refactor mid finding loop in cifs_demultiplex_thread cifs: sanitize length checking in coalesce_t2 (try #3) cifs: check for bytes_remaining going to zero in CIFS_SessSetup cifs: change bleft in decode_unicode_ssetup back to signed type
2011-05-06Regression: partial revert "tracing: Remove lock_depth from event entry"Arjan van de Ven3-0/+3
This partially reverts commit e6e1e2593592a8f6f6380496655d8c6f67431266. That commit changed the structure layout of the trace structure, which in turn broke PowerTOP (1.9x generation) quite badly. I appreciate not wanting to expose the variable in question, and PowerTOP was not using it, so I've replaced the variable with just a padding field - that way if in the future a new field is needed it can just use this padding field. Signed-off-by: Arjan van de Ven <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-05-06vmxnet3: Consistently disable irqs when taking adapter->cmd_lockRoland Dreier1-4/+6
Using the vmxnet3 driver produces a lockdep warning because vmxnet3_set_mc(), which is called with mc->mca_lock held, takes adapter->cmd_lock. However, there are a couple of places where adapter->cmd_lock is taken with softirqs enabled, lockdep warns that a softirq that tries to take mc->mca_lock could happen while adapter->cmd_lock is held, leading to an AB-BA deadlock. I'm not sure if this is a real potential deadlock or not, but the simplest and best fix seems to be simply to make sure we take cmd_lock with spin_lock_irqsave() everywhere -- the places with plain spin_lock just look like oversights. The full enormous lockdep warning is: ========================================================= [ INFO: possible irq lock inversion dependency detected ] 2.6.39-rc6+ #1 --------------------------------------------------------- ifconfig/567 just changed the state of lock: (&(&mc->mca_lock)->rlock){+.-...}, at: [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280 but this lock took another, SOFTIRQ-unsafe lock in the past: (&(&adapter->cmd_lock)->rlock){+.+...} and interrupts could create inverse lock ordering between them. other info that might help us debug this: 4 locks held by ifconfig/567: #0: (rtnl_mutex){+.+.+.}, at: [<ffffffff8147d547>] rtnl_lock+0x17/0x20 #1: ((inetaddr_chain).rwsem){.+.+.+}, at: [<ffffffff810896cf>] __blocking_notifier_call_chain+0x5f/0xb0 #2: (&idev->mc_ifc_timer){+.-...}, at: [<ffffffff8106f21b>] run_timer_softirq+0xeb/0x3f0 #3: (&ndev->lock){++.-..}, at: [<ffffffff81531dd2>] mld_ifc_timer_expire+0x32/0x280 the shortest dependencies between 2nd lock and 1st lock: -> (&(&adapter->cmd_lock)->rlock){+.+...} ops: 11 { HARDIRQ-ON-W at: [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81571156>] _raw_spin_lock+0x36/0x70 [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3] [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b SOFTIRQ-ON-W at: [<ffffffff8109adb7>] __lock_acquire+0x827/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81571156>] _raw_spin_lock+0x36/0x70 [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3] [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b INITIAL USE at: [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81571156>] _raw_spin_lock+0x36/0x70 [<ffffffffa000d212>] vmxnet3_alloc_intr_resources+0x22/0x230 [vmxnet3] [<ffffffffa0014031>] vmxnet3_probe_device+0x5f6/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b } ... key at: [<ffffffffa0017590>] __key.42516+0x0/0xffffffffffffda70 [vmxnet3] ... acquired at: [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81571bb5>] _raw_spin_lock_irqsave+0x55/0xa0 [<ffffffffa000de27>] vmxnet3_set_mc+0x97/0x1a0 [vmxnet3] [<ffffffff8146ffa0>] __dev_set_rx_mode+0x40/0xb0 [<ffffffff81470040>] dev_set_rx_mode+0x30/0x50 [<ffffffff81470127>] __dev_open+0xc7/0x100 [<ffffffff814703c1>] __dev_change_flags+0xa1/0x180 [<ffffffff81470568>] dev_change_flags+0x28/0x70 [<ffffffff814da960>] devinet_ioctl+0x730/0x800 [<ffffffff814db508>] inet_ioctl+0x88/0xa0 [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70 [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0 [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570 [<ffffffff81188d01>] sys_ioctl+0x91/0xa0 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b -> (_xmit_ETHER){+.....} ops: 6 { HARDIRQ-ON-W at: [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81475618>] __dev_mc_add+0x38/0x90 [<ffffffff814756a0>] dev_mc_add+0x10/0x20 [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20 [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70 [<ffffffff8146a944>] register_netdevice+0x244/0x2d0 [<ffffffff8146aa0f>] register_netdev+0x3f/0x60 [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b INITIAL USE at: [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81475618>] __dev_mc_add+0x38/0x90 [<ffffffff814756a0>] dev_mc_add+0x10/0x20 [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20 [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70 [<ffffffff8146a944>] register_netdevice+0x244/0x2d0 [<ffffffff8146aa0f>] register_netdev+0x3f/0x60 [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b } ... key at: [<ffffffff827fd868>] netdev_addr_lock_key+0x8/0x1e0 ... acquired at: [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81475618>] __dev_mc_add+0x38/0x90 [<ffffffff814756a0>] dev_mc_add+0x10/0x20 [<ffffffff81532c9e>] igmp6_group_added+0x10e/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81519f27>] addrconf_notify+0x2f7/0xb10 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff81089586>] raw_notifier_call_chain+0x16/0x20 [<ffffffff814689b7>] call_netdevice_notifiers+0x37/0x70 [<ffffffff8146a944>] register_netdevice+0x244/0x2d0 [<ffffffff8146aa0f>] register_netdev+0x3f/0x60 [<ffffffffa001419b>] vmxnet3_probe_device+0x760/0x15c5 [vmxnet3] [<ffffffff812df67f>] local_pci_probe+0x5f/0xd0 [<ffffffff812dfde9>] pci_device_probe+0x119/0x120 [<ffffffff81373df6>] driver_probe_device+0x96/0x1c0 [<ffffffff81373fcb>] __driver_attach+0xab/0xb0 [<ffffffff81372a1e>] bus_for_each_dev+0x5e/0x90 [<ffffffff81373a2e>] driver_attach+0x1e/0x20 [<ffffffff813735b8>] bus_add_driver+0xc8/0x290 [<ffffffff813745b6>] driver_register+0x76/0x140 [<ffffffff812e0046>] __pci_register_driver+0x66/0xe0 [<ffffffffa001b03a>] serio_raw_poll+0x3a/0x60 [serio_raw] [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff810aa76b>] sys_init_module+0xfb/0x250 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b -> (&(&mc->mca_lock)->rlock){+.-...} ops: 6 { HARDIRQ-ON-W at: [<ffffffff8109ad86>] __lock_acquire+0x7f6/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81ce0d16>] addrconf_init+0x4e/0x183 [<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6 [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff81ca4d3f>] kernel_init+0xe3/0x168 [<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10 IN-SOFTIRQ-W at: [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280 [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0 [<ffffffff810666d0>] __do_softirq+0xc0/0x210 [<ffffffff8157b3dc>] call_softirq+0x1c/0x30 [<ffffffff8100d42d>] do_softirq+0xad/0xe0 [<ffffffff81066afe>] irq_exit+0x9e/0xb0 [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20 [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0 [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60 [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60 [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0 [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0 [<ffffffff814d8223>] inet_del_ifa+0x13/0x20 [<ffffffff814da731>] devinet_ioctl+0x501/0x800 [<ffffffff814db508>] inet_ioctl+0x88/0xa0 [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70 [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0 [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570 [<ffffffff81188d01>] sys_ioctl+0x91/0xa0 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b INITIAL USE at: [<ffffffff8109a9e9>] __lock_acquire+0x459/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81532bd5>] igmp6_group_added+0x45/0x1b0 [<ffffffff81533f2d>] ipv6_dev_mc_inc+0x2cd/0x430 [<ffffffff81515e17>] ipv6_add_dev+0x357/0x450 [<ffffffff81ce0d16>] addrconf_init+0x4e/0x183 [<ffffffff81ce0ba1>] inet6_init+0x191/0x2a6 [<ffffffff81002165>] do_one_initcall+0x45/0x190 [<ffffffff81ca4d3f>] kernel_init+0xe3/0x168 [<ffffffff8157b2e4>] kernel_thread_helper+0x4/0x10 } ... key at: [<ffffffff82801be2>] __key.40877+0x0/0x8 ... acquired at: [<ffffffff810997bc>] check_usage_forwards+0x9c/0x110 [<ffffffff8109a32c>] mark_lock+0x19c/0x400 [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280 [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0 [<ffffffff810666d0>] __do_softirq+0xc0/0x210 [<ffffffff8157b3dc>] call_softirq+0x1c/0x30 [<ffffffff8100d42d>] do_softirq+0xad/0xe0 [<ffffffff81066afe>] irq_exit+0x9e/0xb0 [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20 [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0 [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60 [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60 [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0 [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0 [<ffffffff814d8223>] inet_del_ifa+0x13/0x20 [<ffffffff814da731>] devinet_ioctl+0x501/0x800 [<ffffffff814db508>] inet_ioctl+0x88/0xa0 [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70 [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0 [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570 [<ffffffff81188d01>] sys_ioctl+0x91/0xa0 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b stack backtrace: Pid: 567, comm: ifconfig Not tainted 2.6.39-rc6+ #1 Call Trace: <IRQ> [<ffffffff810996f6>] print_irq_inversion_bug+0x146/0x170 [<ffffffff81099720>] ? print_irq_inversion_bug+0x170/0x170 [<ffffffff810997bc>] check_usage_forwards+0x9c/0x110 [<ffffffff8109a32c>] mark_lock+0x19c/0x400 [<ffffffff8109ad5e>] __lock_acquire+0x7ce/0x1e10 [<ffffffff8109a383>] ? mark_lock+0x1f3/0x400 [<ffffffff8109b497>] ? __lock_acquire+0xf07/0x1e10 [<ffffffff81012255>] ? native_sched_clock+0x15/0x70 [<ffffffff8109ca4d>] lock_acquire+0x9d/0x130 [<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280 [<ffffffff8109759d>] ? lock_release_holdtime+0x3d/0x1a0 [<ffffffff8157124b>] _raw_spin_lock_bh+0x3b/0x70 [<ffffffff81531e9f>] ? mld_ifc_timer_expire+0xff/0x280 [<ffffffff8157170b>] ? _raw_spin_unlock+0x2b/0x40 [<ffffffff81531e9f>] mld_ifc_timer_expire+0xff/0x280 [<ffffffff8106f2a9>] run_timer_softirq+0x179/0x3f0 [<ffffffff8106f21b>] ? run_timer_softirq+0xeb/0x3f0 [<ffffffff810122b9>] ? sched_clock+0x9/0x10 [<ffffffff81531da0>] ? mld_gq_timer_expire+0x30/0x30 [<ffffffff810666d0>] __do_softirq+0xc0/0x210 [<ffffffff8109455f>] ? tick_program_event+0x1f/0x30 [<ffffffff8157b3dc>] call_softirq+0x1c/0x30 [<ffffffff8100d42d>] do_softirq+0xad/0xe0 [<ffffffff81066afe>] irq_exit+0x9e/0xb0 [<ffffffff8157bd40>] smp_apic_timer_interrupt+0x70/0x9b [<ffffffff8157ab93>] apic_timer_interrupt+0x13/0x20 <EOI> [<ffffffff81571f14>] ? retint_restore_args+0x13/0x13 [<ffffffff810974a7>] ? lock_is_held+0x17/0xd0 [<ffffffff8149d857>] rt_do_flush+0x87/0x2a0 [<ffffffff814a16b6>] rt_cache_flush+0x46/0x60 [<ffffffff814e36e0>] fib_disable_ip+0x40/0x60 [<ffffffff814e5447>] fib_inetaddr_event+0xd7/0xe0 [<ffffffff81575c1c>] notifier_call_chain+0x8c/0xc0 [<ffffffff810896e8>] __blocking_notifier_call_chain+0x78/0xb0 [<ffffffff81089736>] blocking_notifier_call_chain+0x16/0x20 [<ffffffff814d8021>] __inet_del_ifa+0xf1/0x2e0 [<ffffffff814d8223>] inet_del_ifa+0x13/0x20 [<ffffffff814da731>] devinet_ioctl+0x501/0x800 [<ffffffff8108a3af>] ? local_clock+0x6f/0x80 [<ffffffff81575898>] ? do_page_fault+0x268/0x560 [<ffffffff814db508>] inet_ioctl+0x88/0xa0 [<ffffffff814541f0>] sock_do_ioctl+0x30/0x70 [<ffffffff814542a9>] sock_ioctl+0x79/0x2f0 [<ffffffff810dfe87>] ? __call_rcu+0xa7/0x190 [<ffffffff81188798>] do_vfs_ioctl+0x98/0x570 [<ffffffff8117737e>] ? fget_light+0x33e/0x430 [<ffffffff81571ef9>] ? retint_swapgs+0x13/0x1b [<ffffffff81188d01>] sys_ioctl+0x91/0xa0 [<ffffffff8157a142>] system_call_fastpath+0x16/0x1b Signed-off-by: Roland Dreier <[email protected]> Signed-off-by: Shreyas N Bhatewara <[email protected]> Signed-off-by: Scott J. Goldman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-05-06dccp: handle invalid feature options lengthDan Rosenberg1-0/+2
A length of zero (after subtracting two for the type and len fields) for the DCCPO_{CHANGE,CONFIRM}_{L,R} options will cause an underflow due to the subtraction. The subsequent code may read past the end of the options value buffer when parsing. I'm unsure of what the consequences of this might be, but it's probably not good. Signed-off-by: Dan Rosenberg <[email protected]> Cc: [email protected] Acked-by: Gerrit Renker <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-05-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds1-1/+6
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: [SCSI] fix oops in scsi_run_queue()
2011-05-06Validate size of EFI GUID partition entries.Timo Warns1-0/+6
Otherwise corrupted EFI partition tables can cause total confusion. Signed-off-by: Timo Warns <[email protected]> Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
2011-05-06perf events, x86: Fix Intel Nehalem and Westmere last level cache event ↵Peter Zijlstra1-35/+52
definitions The Intel Nehalem offcore bits implemented in: e994d7d23a0b: perf: Fix LLC-* events on Intel Nehalem/Westmere ... are wrong: they implemented _ACCESS as _HIT and counted OTHER_CORE_HIT* as MISS even though its clearly documented as an L3 hit ... Fix them and the Westmere definitions as well. Cc: Andi Kleen <[email protected]> Cc: Lin Ming <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Mike Galbraith <[email protected]> Cc: Steven Rostedt <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2011-05-06hw_breakpoints, powerpc: Fix CONFIG_HAVE_HW_BREAKPOINT off-case in ↵Frederic Weisbecker1-4/+11
ptrace_set_debugreg() We make use of ptrace_get_breakpoints() / ptrace_put_breakpoints() to protect ptrace_set_debugreg() even if CONFIG_HAVE_HW_BREAKPOINT if off. However in this case, these APIs are not implemented. To fix this, push the protection down inside the relevant ifdef. Best would be to export the code inside CONFIG_HAVE_HW_BREAKPOINT into a standalone function to cleanup the ifdefury there and call the breakpoint ref API inside. But as it is more invasive, this should be rather made in an -rc1. Fixes this build error: arch/powerpc/kernel/ptrace.c:1594: error: implicit declaration of function 'ptrace_get_breakpoints' make[2]: *** Reported-by: Ingo Molnar <[email protected]> Signed-off-by: Frederic Weisbecker <[email protected]> Cc: LPPC <[email protected]> Cc: Prasad <[email protected]> Cc: v2.6.33.. <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2011-05-06ARM: RiscPC: acornfb: fix section mismatchesRussell King1-16/+10
WARNING: drivers/video/built-in.o(.devinit.text+0x38): Section mismatch in reference from the function acornfb_probe() to the function .init.text:acornfb_setup() The function __devinit acornfb_probe() references a function __init acornfb_setup(). If acornfb_setup is only used by acornfb_probe then annotate acornfb_setup with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x3c): Section mismatch in reference from the function acornfb_probe() to the function .init.text:acornfb_init_fbinfo() The function __devinit acornfb_probe() references a function __init acornfb_init_fbinfo(). If acornfb_init_fbinfo is only used by acornfb_probe then annotate acornfb_init_fbinfo with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x4c0): Section mismatch in reference from the function acornfb_probe() to the (unknown reference) .init.data:(unknown) The function __devinit acornfb_probe() references a (unknown reference) __initdata (unknown). If (unknown) is only used by acornfb_probe then annotate (unknown) with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x4c8): Section mismatch in reference from the function acornfb_probe() to the (unknown reference) .init.data:(unknown) The function __devinit acornfb_probe() references a (unknown reference) __initdata (unknown). If (unknown) is only used by acornfb_probe then annotate (unknown) with a matching annotation. WARNING: drivers/video/built-in.o(.devinit.text+0x4cc): Section mismatch in reference from the function acornfb_probe() to the (unknown reference) .init.data:(unknown) The function __devinit acornfb_probe() references a (unknown reference) __initdata (unknown). If (unknown) is only used by acornfb_probe then annotate (unknown) with a matching annotation. Signed-off-by: Russell King <[email protected]>
2011-05-06ARM: RiscPC: etherh: fix section mismatchesRussell King1-2/+2
WARNING: drivers/net/arm/built-in.o(.data+0x0): Section mismatch in reference from the variable etherh_driver to the function .init.text:etherh_probe() The variable etherh_driver references the function __init etherh_probe() If the reference is valid then annotate the variable with __init* or __refdata (see linux/init.h) or name the variable: *_template, *_timer, *_sht, *_ops, *_probe, *_probe_one, *_console Signed-off-by: Russell King <[email protected]>
2011-05-06Merge branch 'master' of ↵Ingo Molnar83-169/+576
ssh://master.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6 into perf/urgent
2011-05-05Merge branch 'for-linus' of git://github.com/at91linux/linux-2.6-at91Linus Torvalds4-1/+83
* 'for-linus' of git://github.com/at91linux/linux-2.6-at91: at91: Add ARCH_ID and basic cpu macros definition for 5series chips family. arm: at91: fix compiler warning for eb01 board build arm: at91: minimal defconfig for at91x40 SoC ARM: at91: AT91CAP9 has a macb device
2011-05-05can: fix SJA1000 dlc for RTR packetsKurt Van Dijck1-1/+1
RTR frames do have a valid data length code on CAN. The driver for SJA1000 did not handle that situation properly. Signed-off-by: Kurt Van Dijck <[email protected]> Acked-by: Marc Kleine-Budde <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-05-05usbnet: runtime pm: fix out of memoryMing Lei1-3/+7
This patch makes use of the EVENT_DEV_OPEN flag introduced recently to fix one out of memory issue, which can be reproduced on omap3/4 based pandaboard/beagle XM easily with steps below: - enable runtime pm echo auto > /sys/devices/platform/usbhs-omap.0/ehci-omap.0/usb1/1-1/1-1.1/power/control - ifconfig eth0 up - then out of memroy happened, see [1] for kernel message. Follows my analysis: - 'ifconfig eth0 up' brings eth0 out of suspend, and usbnet_resume is called to schedule dev->bh, then rx urbs are submited to prepare for recieving data; - some usbnet devices will produce garbage rx packets flood if info->reset is not called in usbnet_open. - so there is no enough chances for usbnet_bh to handle and release recieved skb buffers since many rx interrupts consumes cpu, so out of memory for atomic allocation in rx_submit happened. This patch fixes the issue by simply not allowing schedule of usbnet_bh until device is opened. [1], dmesg [ 234.712005] smsc95xx 1-1.1:1.0: rpm_resume flags 0x4 [ 234.712066] usb 1-1.1: rpm_resume flags 0x0 [ 234.712066] usb 1-1: rpm_resume flags 0x0 [ 234.712097] usb usb1: rpm_resume flags 0x0 [ 234.712127] usb usb1: usb auto-resume [ 234.712158] ehci-omap ehci-omap.0: resume root hub [ 234.754028] hub 1-0:1.0: hub_resume [ 234.754821] hub 1-0:1.0: port 1: status 0507 change 0000 [ 234.756011] hub 1-0:1.0: state 7 ports 3 chg 0000 evt 0000 [ 234.756042] hub 1-0:1.0: rpm_resume flags 0x4 [ 234.756072] usb usb1: rpm_resume flags 0x0 [ 234.756164] usb usb1: rpm_resume returns 1 [ 234.756195] hub 1-0:1.0: rpm_resume returns 0 [ 234.756195] hub 1-0:1.0: rpm_suspend flags 0x4 [ 234.756225] hub 1-0:1.0: rpm_suspend returns 0 [ 234.756256] usb usb1: rpm_resume returns 0 [ 234.757141] usb 1-1: usb auto-resume [ 234.793151] ehci-omap ehci-omap.0: GetStatus port:1 status 001005 0 ACK POWER sig=se0 PE CONNECT [ 234.816558] usb 1-1: finish resume [ 234.817871] hub 1-1:1.0: hub_resume [ 234.818420] hub 1-1:1.0: port 1: status 0507 change 0000 [ 234.820495] ehci-omap ehci-omap.0: reused qh eec50220 schedule [ 234.820495] usb 1-1: link qh256-0001/eec50220 start 1 [1/0 us] [ 234.820587] usb 1-1: rpm_resume returns 0 [ 234.820800] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0000 [ 234.820800] hub 1-1:1.0: rpm_resume flags 0x4 [ 234.820831] hub 1-1:1.0: rpm_resume returns 0 [ 234.820861] hub 1-1:1.0: rpm_suspend flags 0x4 [ 234.820861] hub 1-1:1.0: rpm_suspend returns 0 [ 234.821777] usb 1-1.1: usb auto-resume [ 234.868591] hub 1-1:1.0: state 7 ports 5 chg 0000 evt 0002 [ 234.868591] hub 1-1:1.0: rpm_resume flags 0x4 [ 234.868621] hub 1-1:1.0: rpm_resume returns 0 [ 234.868652] hub 1-1:1.0: rpm_suspend flags 0x4 [ 234.868652] hub 1-1:1.0: rpm_suspend returns 0 [ 234.879486] usb 1-1.1: finish resume [ 234.880279] usb 1-1.1: rpm_resume returns 0 [ 234.880310] smsc95xx 1-1.1:1.0: rpm_resume returns 0 [ 238.880187] ksoftirqd/0: page allocation failure. order:0, mode:0x20 [ 238.880218] Backtrace: [ 238.880249] [<c01b9800>] (dump_backtrace+0x0/0xf8) from [<c065e1dc>] (dump_stack+0x18/0x1c) [ 238.880249] r6:00000000 r5:00000000 r4:00000020 r3:00000002 [ 238.880310] [<c065e1c4>] (dump_stack+0x0/0x1c) from [<c026ece4>] (__alloc_pages_nodemask+0x620/0x724) [ 238.880340] [<c026e6c4>] (__alloc_pages_nodemask+0x0/0x724) from [<c02986d4>] (kmem_getpages.clone.34+0x34/0xc8) [ 238.880371] [<c02986a0>] (kmem_getpages.clone.34+0x0/0xc8) from [<c02988f8>] (cache_grow.clone.42+0x84/0x154) [ 238.880371] r6:ef871aa4 r5:ef871a80 r4:ef81fd40 r3:00000020 [ 238.880401] [<c0298874>] (cache_grow.clone.42+0x0/0x154) from [<c0298b64>] (cache_alloc_refill+0x19c/0x1f0) [ 238.880432] [<c02989c8>] (cache_alloc_refill+0x0/0x1f0) from [<c0299804>] (kmem_cache_alloc+0x90/0x190) [ 238.880462] [<c0299774>] (kmem_cache_alloc+0x0/0x190) from [<c052e260>] (__alloc_skb+0x34/0xe8) [ 238.880493] [<c052e22c>] (__alloc_skb+0x0/0xe8) from [<bf0509f4>] (rx_submit+0x2c/0x1d4 [usbnet]) [ 238.880523] [<bf0509c8>] (rx_submit+0x0/0x1d4 [usbnet]) from [<bf050d38>] (rx_complete+0x19c/0x1b0 [usbnet]) [ 238.880737] [<bf050b9c>] (rx_complete+0x0/0x1b0 [usbnet]) from [<bf006fd0>] (usb_hcd_giveback_urb+0xa8/0xf4 [usbcore]) [ 238.880737] r8:eeeced34 r7:eeecec00 r6:eeecec00 r5:00000000 r4:eec2dd20 [ 238.880767] r3:bf050b9c [ 238.880859] [<bf006f28>] (usb_hcd_giveback_urb+0x0/0xf4 [usbcore]) from [<bf03c8f8>] (ehci_urb_done+0xb0/0xbc [ehci_hcd]) [ 238.880859] r6:00000000 r5:eec2dd20 r4:eeeced44 r3:eec2dd34 [ 238.880920] [<bf03c848>] (ehci_urb_done+0x0/0xbc [ehci_hcd]) from [<bf040204>] (qh_completions+0x308/0x3bc [ehci_hcd]) [ 238.880920] r7:00000000 r6:eeda21a0 r5:ffdfe3c0 r4:eeda21ac [ 238.880981] [<bf03fefc>] (qh_completions+0x0/0x3bc [ehci_hcd]) from [<bf040ef8>] (scan_async+0xb0/0x16c [ehci_hcd]) [ 238.881011] [<bf040e48>] (scan_async+0x0/0x16c [ehci_hcd]) from [<bf040fec>] (ehci_work+0x38/0x90 [ehci_hcd]) [ 238.881042] [<bf040fb4>] (ehci_work+0x0/0x90 [ehci_hcd]) from [<bf042940>] (ehci_irq+0x300/0x34c [ehci_hcd]) [ 238.881072] r4:eeeced34 r3:00000001 [ 238.881134] [<bf042640>] (ehci_irq+0x0/0x34c [ehci_hcd]) from [<bf006828>] (usb_hcd_irq+0x40/0xac [usbcore]) [ 238.881195] [<bf0067e8>] (usb_hcd_irq+0x0/0xac [usbcore]) from [<c0239764>] (handle_irq_event_percpu+0xb8/0x240) [ 238.881225] r6:eec504e0 r5:0000006d r4:eec504e0 r3:bf0067e8 [ 238.881256] [<c02396ac>] (handle_irq_event_percpu+0x0/0x240) from [<c0239930>] (handle_irq_event+0x44/0x64) [ 238.881256] [<c02398ec>] (handle_irq_event+0x0/0x64) from [<c023bbd0>] (handle_level_irq+0xe0/0x114) [ 238.881286] r6:0000006d r5:c080c14c r4:c080c100 r3:00020000 [ 238.881317] [<c023baf0>] (handle_level_irq+0x0/0x114) from [<c01ab090>] (asm_do_IRQ+0x90/0xd0) [ 238.881317] r5:00000000 r4:0000006d [ 238.881347] [<c01ab000>] (asm_do_IRQ+0x0/0xd0) from [<c06624d0>] (__irq_svc+0x50/0x134) [ 238.881378] Exception stack(0xef837e20 to 0xef837e68) [ 238.881378] 7e20: 00000001 00185610 016cc000 c00490c0 eb380000 ef800540 00000020 00004ae0 [ 238.881408] 7e40: 00000020 bf0509f4 60000013 ef837e9c ef837e40 ef837e68 c0226f0c c0298ca0 [ 238.881408] 7e60: 20000013 ffffffff [ 238.881408] r5:fa240100 r4:ffffffff [ 238.881439] [<c0298bb8>] (__kmalloc_track_caller+0x0/0x1d0) from [<c052e284>] (__alloc_skb+0x58/0xe8) [ 238.881469] [<c052e22c>] (__alloc_skb+0x0/0xe8) from [<bf0509f4>] (rx_submit+0x2c/0x1d4 [usbnet]) [ 238.881500] [<bf0509c8>] (rx_submit+0x0/0x1d4 [usbnet]) from [<bf0513d8>] (usbnet_bh+0x1b4/0x250 [usbnet]) [ 238.881530] [<bf051224>] (usbnet_bh+0x0/0x250 [usbnet]) from [<c01f912c>] (tasklet_action+0xb0/0x1f8) [ 238.881530] r6:00000000 r5:ef9757f0 r4:ef9757ec r3:bf051224 [ 238.881561] [<c01f907c>] (tasklet_action+0x0/0x1f8) from [<c01f97ac>] (__do_softirq+0x140/0x290) [ 238.881561] r8:00000006 r7:00000101 r6:00000000 r5:c0806098 r4:00000001 [ 238.881591] r3:c01f907c [ 238.881622] [<c01f966c>] (__do_softirq+0x0/0x290) from [<c01f99cc>] (run_ksoftirqd+0xd0/0x1f4) [ 238.881622] [<c01f98fc>] (run_ksoftirqd+0x0/0x1f4) from [<c02113b0>] (kthread+0x90/0x98) [ 238.881652] r7:00000013 r6:c01f98fc r5:00000000 r4:ef831efc [ 238.881683] [<c0211320>] (kthread+0x0/0x98) from [<c01f62f4>] (do_exit+0x0/0x374) [ 238.881713] r6:c01f62f4 r5:c0211320 r4:ef831efc [ 238.881713] Mem-info: [ 238.881744] Normal per-cpu: [ 238.881744] CPU 0: hi: 186, btch: 31 usd: 38 [ 238.881744] CPU 1: hi: 186, btch: 31 usd: 169 [ 238.881774] HighMem per-cpu: [ 238.881774] CPU 0: hi: 90, btch: 15 usd: 66 [ 238.881774] CPU 1: hi: 90, btch: 15 usd: 86 [ 238.881805] active_anon:544 inactive_anon:71 isolated_anon:0 [ 238.881805] active_file:926 inactive_file:2538 isolated_file:0 [ 238.881805] unevictable:0 dirty:10 writeback:0 unstable:0 [ 238.881805] free:57782 slab_reclaimable:864 slab_unreclaimable:186898 [ 238.881805] mapped:632 shmem:144 pagetables:50 bounce:0 [ 238.881835] Normal free:1328kB min:3532kB low:4412kB high:5296kB active_anon:0kB inactive_anon:0kB active_file:880kB inactive_file:848kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:780288kB mlocked:0kB dirty:36kB writeback:0kB mapped:0kB shmem:0kB slab_reclaimable:3456kB slab_unreclaimable:747592kB kernel_stack:392kB pagetables:200kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no [ 238.881866] lowmem_reserve[]: 0 1904 1904 [ 238.881896] HighMem free:229800kB min:236kB low:508kB high:784kB active_anon:2176kB inactive_anon:284kB active_file:2824kB inactive_file:9304kB unevictable:0kB isolated(anon):0kB isolated(file):0kB present:243712kB mlocked:0kB dirty:4kB writeback:0kB mapped:2528kB shmem:576kB slab_reclaimable:0kB slab_unreclaimable:0kB kernel_stack:0kB pagetables:0kB unstable:0kB bounce:0kB writeback_tmp:0kB pages_scanned:0 all_unreclaimable? no [ 238.881927] lowmem_reserve[]: 0 0 0 [ 238.881958] Normal: 0*4kB 4*8kB 6*16kB 0*32kB 1*64kB 1*128kB 0*256kB 2*512kB 0*1024kB 0*2048kB 0*4096kB = 1344kB [ 238.882019] HighMem: 6*4kB 2*8kB 4*16kB 4*32kB 1*64kB 1*128kB 0*256kB 2*512kB 3*1024kB 0*2048kB 55*4096kB = 229800kB [ 238.882080] 3610 total pagecache pages [ 238.882080] 0 pages in swap cache [ 238.882080] Swap cache stats: add 0, delete 0, find 0/0 [ 238.882110] Free swap = 0kB [ 238.882110] Total swap = 0kB [ 238.933776] 262144 pages of RAM [ 238.933776] 58240 free pages [ 238.933776] 10503 reserved pages [ 238.933776] 187773 slab pages [ 238.933807] 2475 pages shared [ 238.933807] 0 pages swap cached Signed-off-by: Ming Lei <[email protected]> Acked-by: Oliver Neukum <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-05-05Input: ads7846 - remove unused variable from struct ads7845_ser_reqAlexander Stein1-1/+0
Signed-off-by: Alexander Stein <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2011-05-05Input: ads7846 - make transfer buffers DMA safeAlexander Stein1-2/+10
req.sample needs its own cacheline otherwise accessing req.msg fetches it in again. Note: This effect doesn't occur if the underlying SPI driver doesn't use DMA at all. Signed-off-by: Alexander Stein <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Signed-off-by: Dmitry Torokhov <[email protected]>
2011-05-04VM: skip the stack guard page lookup in get_user_pages only for mlockLinus Torvalds2-8/+4
The logic in __get_user_pages() used to skip the stack guard page lookup whenever the caller wasn't interested in seeing what the actual page was. But Michel Lespinasse points out that there are cases where we don't care about the physical page itself (so 'pages' may be NULL), but do want to make sure a page is mapped into the virtual address space. So using the existence of the "pages" array as an indication of whether to look up the guard page or not isn't actually so great, and we really should just use the FOLL_MLOCK bit. But because that bit was only set for the VM_LOCKED case (and not all vma's necessarily have it, even for mlock()), we couldn't do that originally. Fix that by moving the VM_LOCKED check deeper into the call-chain, which actually simplifies many things. Now mlock() gets simpler, and we can also check for FOLL_MLOCK in __get_user_pages() and the code ends up much more straightforward. Reported-and-reviewed-by: Michel Lespinasse <[email protected]> Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
2011-05-04Merge branch 'staging-linus' of ↵Linus Torvalds17-23/+24
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6 * 'staging-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: staging: Remove a warning for drivers/staging/wlan-ng/cfg80211.c staging: intel_sst: intelmid needs delay.h staging: solo6x10: add select SND_PCM to fix build error staging: usbip: vhci: fix oops on subsequent attach staging: ft1000: Remove unnecessary EXPORT_SYMBOLs staging: rts_pstor: use #ifdef instead of #if staging: rts_pstor: Add <linux/vmalloc.h> staging: gma500: Depend on X86 staging: olpc: Add <linux/delay.h>
2011-05-04Merge branch 'usb-linus' of ↵Linus Torvalds7-14/+45
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 * 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: xHCI: Clear PLC in xhci_bus_resume() USB: fix regression in usbip by setting has_tt flag usb/isp1760: Report correct urb status after unlink omap:usb: add regulator support for EHCI mfd: Fix usbhs_enable error handling usb: musb: gadget: Fix out-of-sync runtime pm calls usb: musb: omap2430: Fix retention idle on musb peripheral only boards
2011-05-04Merge branch 'for-linus' of ↵Linus Torvalds9-31/+49
git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client: ceph: do not call __mark_dirty_inode under i_lock libceph: fix ceph_osdc_alloc_request error checks ceph: handle ceph_osdc_new_request failure in ceph_writepages_start libceph: fix ceph_msg_new error path ceph: use ihold() when i_lock is held
2011-05-04Merge branch 'v4l_for_linus' of ↵Linus Torvalds14-13/+44
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: [media] ngene: Fix CI data transfer regression Fix CI data transfer regression introduced by previous cleanup. [media] v4l: make sure drivers supply a zeroed struct v4l2_subdev [media] Missing frontend config for LME DM04/QQBOX [media] rc_core: avoid kernel oops when rmmod saa7134 [media] imon: add conditional locking in change_protocol [media] rc: show RC_TYPE_OTHER in sysfs [media] ite-cir: modular build on ppc requires delay.h include [media] mceusb: add Dell transceiver ID
2011-05-04Merge branch 'fixes' of ↵Linus Torvalds1-14/+25
git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6 * 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6: firewire: Fix for broken configrom updates in quick succession
2011-05-04Merge branch 'for-linus' of ↵Linus Torvalds5-13/+26
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6: flex_arrays: allow zero length flex arrays flex_array: flex_array_prealloc takes a number of elements, not an end SELinux: pass last path component in may_create
2011-05-04slub: Fix the lockless code on 32-bit platforms with no 64-bit cmpxchgThomas Gleixner2-3/+3
The SLUB allocator use of the cmpxchg_double logic was wrong: it actually needs the irq-safe one. That happens automatically when we use the native unlocked 'cmpxchg8b' instruction, but when compiling the kernel for older x86 CPUs that do not support that instruction, we fall back to the generic emulation code. And if you don't specify that you want the irq-safe version, the generic code ends up just open-coding the cmpxchg8b equivalent without any protection against interrupts or preemption. Which definitely doesn't work for SLUB. This was reported by Werner Landgraf <[email protected]>, who saw instability with his distro-kernel that was compiled to support pretty much everything under the sun. Most big Linux distributions tend to compile for PPro and later, and would never have noticed this problem. This also fixes the prototypes for the irqsafe cmpxchg_double functions to use 'bool' like they should. [ Btw, that whole "generic code defaults to no protection" design just sounds stupid - if the code needs no protection, there is no reason to use "cmpxchg_double" to begin with. So we should probably just remove the unprotected version entirely as pointless. - Linus ] Signed-off-by: Thomas Gleixner <[email protected]> Reported-and-tested-by: werner <[email protected]> Acked-and-tested-by: Ingo Molnar <[email protected]> Acked-by: Christoph Lameter <[email protected]> Cc: Pekka Enberg <[email protected]> Cc: Jens Axboe <[email protected]> Cc: Tejun Heo <[email protected]> Link: http://lkml.kernel.org/r/alpine.LFD.2.02.1105041539050.3005@ionos Signed-off-by: Ingo Molnar <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2011-05-04net: ip_expire() must revalidate routeEric Dumazet1-16/+15
Commit 4a94445c9a5c (net: Use ip_route_input_noref() in input path) added a bug in IP defragmentation handling, in case timeout is fired. When a frame is defragmented, we use last skb dst field when building final skb. Its dst is valid, since we are in rcu read section. But if a timeout occurs, we take first queued fragment to build one ICMP TIME EXCEEDED message. Problem is all queued skb have weak dst pointers, since we escaped RCU critical section after their queueing. icmp_send() might dereference a now freed (and possibly reused) part of memory. Calling skb_dst_drop() and ip_route_input_noref() to revalidate route is the only possible choice. Reported-by: Denys Fedoryshchenko <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2011-05-04ceph: do not call __mark_dirty_inode under i_lockSage Weil5-12/+23
The __mark_dirty_inode helper now takes i_lock as of 250df6ed. Fix the one ceph callers that held i_lock (__ceph_mark_dirty_caps) to return the flags value so that the callers can do it outside of i_lock. Signed-off-by: Sage Weil <[email protected]>
2011-05-04drm/i915/dp: Be paranoid in case we disable a DP before it is attachedChris Wilson1-2/+15
Given that the hardware may be left in a random condition by the BIOS, it is conceivable that we then attempt to clear the DP_PIPEB_SELECT bit without us ever enabling/attaching the DP encoder to a pipe. Thus causing a NULL deference when we attempt to wait for a vblank on that crtc. Reported-and-tested-by: Bryan Christ <[email protected]> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36314 Signed-off-by: Chris Wilson <[email protected]> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=36456 Reported-and-tested-by: Bo Wang <[email protected]> Cc: [email protected] Signed-off-by: Keith Packard <[email protected]>
2011-05-04drm/i915: Release object along create user fb error pathChris Wilson1-1/+3
Reported-by: Alan Cox <[email protected]> Signed-off-by: Chris Wilson <[email protected]> Cc: [email protected] Signed-off-by: Keith Packard <[email protected]>
2011-05-04Merge branch 'perf/urgent' of ↵Ingo Molnar8-12/+74
git://git.kernel.org/pub/scm/linux/kernel/git/frederic/random-tracing into perf/urgent
2011-05-03Linux 2.6.39-rc6Linus Torvalds1-1/+1
2011-05-04Merge branch 'for-linus' of git://git.infradead.org/users/eparis/selinux ↵James Morris5-13/+26
into for-linus
2011-05-03Merge branch 'drm-fixes' of ↵Linus Torvalds7-10/+49
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/radeon/kms: fix gart setup on fusion parts (v2) drm: Send pending vblank events before disabling vblank. drm/radeon: fix regression on atom cards with hardcoded EDID record. drm/radeon/kms: add some new pci ids
2011-05-04drm/radeon/kms: fix gart setup on fusion parts (v2)Alex Deucher4-8/+18
Out of the entire GART/VM subsystem, the hw designers changed the location of 3 regs. v2: airlied: add parameter for userspace to work from. Signed-off-by: Alex Deucher <[email protected]> Signed-off-by: Jerome Glisse <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
2011-05-04drm: Send pending vblank events before disabling vblank.Christopher James Halse Rogers1-0/+23
This is the least-bad behaviour. It means that we signal the vblank event before it actually happens, but since we're disabling vblanks there's no guarantee that it will *ever* happen otherwise. This prevents GL applications which use WaitMSC from hanging indefinitely. Signed-off-by: Christopher James Halse Rogers <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2011-05-04drm/radeon: fix regression on atom cards with hardcoded EDID record.Dave Airlie1-2/+3
Since fafcf94e2b5732d1e13b440291c53115d2b172e9 introduced an edid size, it seems to have broken this path. This manifest as oops on T500 Lenovo laptops with dual graphics primarily. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=33812 cc: [email protected] Reviewed-by: Alex Deucher <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2011-05-04drm/radeon/kms: add some new pci idsAlex Deucher1-0/+5
Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected] Signed-off-by: Dave Airlie <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.