| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
extent_write_cache_pages stops writing pages as soon as nr_to_write hits
zero. That is the right thing for opportunistic writeback, but incorrect
for data integrity writeback, which needs to ensure that no dirty pages
are left in the range. Thus only stop the writeback for WB_SYNC_NONE
if nr_to_write hits 0.
This is a port of write_cache_pages changes in commit 05fe478dd04e
("mm: write_cache_pages integrity fix").
Note that I've only trigger the problem with other changes to the btrfs
writeback code, but this condition seems worthwhile fixing anyway.
CC: [email protected] # 4.14+
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: David Sterba <[email protected]>
[ updated comment ]
Signed-off-by: David Sterba <[email protected]>
|
|
The PCSpecialist Elimina Pro 16 M laptop model is a Zen laptop which
needs to use the MADT IRQ settings override and which does not have
an INT_SRC_OVR entry for IRQ 1 in its MADT.
So this model needs a DMI quirk to enable the MADT IRQ settings override
to fix its keyboard not working.
Fixes: a9c4a912b7dc ("ACPI: resource: Remove "Zen" specific match and quirks")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217394#c18
Cc: All applicable <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
'id' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
lp872x.c:867:5: error: cast to smaller integer type 'enum lp872x_regulator_id' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
'id' is an enum, thus cast of pointer on 64-bit compile test with W=1
causes:
max77857-regulator.c:56:24: error: cast to smaller integer type 'enum max77857_id' from 'void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
'variant' is an enum, thus cast of pointer on 64-bit compile test with
W=1 causes:
ltc3589.c:394:22: error: cast to smaller integer type 'enum ltc3589_variant' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast]
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Use the helper function devm_kmemdup() rather than duplicating its
implementation, which helps to enhance code readability.
Signed-off-by: Li Zetao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Recently we've been having mysterious hangs while running generic/475 on
the CI system. This turned out to be something like this:
Task 1
dmsetup suspend --nolockfs
-> __dm_suspend
-> dm_wait_for_completion
-> dm_wait_for_bios_completion
-> Unable to complete because of IO's on a plug in Task 2
Task 2
wb_workfn
-> wb_writeback
-> blk_start_plug
-> writeback_sb_inodes
-> Infinite loop unable to make an allocation
Task 3
cache_block_group
->read_extent_buffer_pages
->Waiting for IO to complete that can't be submitted because Task 1
suspended the DM device
The problem here is that we need Task 2 to be scheduled completely for
the blk plug to flush. Normally this would happen, we normally wait for
the block group caching to finish (Task 3), and this schedule would
result in the block plug flushing.
However if there's enough free space available from the current caching
to satisfy the allocation we won't actually wait for the caching to
complete. This check however just checks that we have enough space, not
that we can make the allocation. In this particular case we were trying
to allocate 9MiB, and we had 10MiB of free space, but we didn't have
9MiB of contiguous space to allocate, and thus the allocation failed and
we looped.
We specifically don't cycle through the FFE loop until we stop finding
cached block groups because we don't want to allocate new block groups
just because we're caching, so we short circuit the normal loop once we
hit LOOP_CACHING_WAIT and we found a caching block group.
This is normally fine, except in this particular case where the caching
thread can't make progress because the DM device has been suspended.
Fix this by not only waiting for free space to >= the amount of space we
want to allocate, but also that we make some progress in caching from
the time we start waiting. This will keep us from busy looping when the
caching is taking a while but still theoretically has enough space for
us to allocate from, and fixes this particular case by forcing us to
actually sleep and wait for forward progress, which will flush the plug.
With this fix we're no longer hanging with generic/475.
CC: [email protected] # 6.1+
Reviewed-by: Boris Burkov <[email protected]>
Signed-off-by: Josef Bacik <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
Fix a -Wmissing-prototypes warning and add the gather_data_sampling()
stub macro call for real.
Fixes: 0fddfe338210 ("driver core: cpu: Unify redundant silly stubs")
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The assertion added to verify the difference in bits set of the
addresses of srso_untrain_ret_alias() and srso_safe_ret_alias() would fail
to link in LLVM's ld.lld linker with the following error:
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:210: at least one side of
the expression must be absolute
ld.lld: error: ./arch/x86/kernel/vmlinux.lds:211: at least one side of
the expression must be absolute
Use ABSOLUTE to evaluate the expression referring to at least one of the
symbols so that LLD can evaluate the linker script.
Also, add linker version info to the comment about XOR being unsupported
in either ld.bfd or ld.lld until somewhat recently.
Fixes: fb3bd914b3ec ("x86/srso: Add a Speculative RAS Overflow mitigation")
Closes: https://lore.kernel.org/llvm/CA+G9fYsdUeNu-gwbs0+T6XHi4hYYk=Y9725-wFhZ7gJMspLDRA@mail.gmail.com/
Reported-by: Nathan Chancellor <[email protected]>
Reported-by: Daniel Kolesa <[email protected]>
Reported-by: Naresh Kamboju <[email protected]>
Suggested-by: Sven Volkinsfeld <[email protected]>
Signed-off-by: Nick Desaulniers <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Link: https://github.com/ClangBuiltLinux/linux/issues/1907
Link: https://lore.kernel.org/r/[email protected]
|
|
Add a note about the dependency of the User->User mitigation on the
previous Spectre v2 IBPB selection.
Make the layout moar pretty.
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Make them all a weak function, aliasing to a single function which
issues the "Not affected" string.
No functional changes.
Suggested-by: Linus Torvalds <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Reviewed-by: Nikolay Borisov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Most of the index.rst files in Documentation/ refer to other rst files
without their file extension in the name. Do that here too.
No functional changes.
Reported-by: Linus Torvalds <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The dma-buf backend is supposed to provide its own vm_ops, but some
implementation just have nothing special to do and leave vm_ops
untouched, probably expecting this field to be zero initialized (this
is the case with the system_heap implementation for instance).
Let's reset vma->vm_ops to NULL to keep things working with these
implementations.
Fixes: 26d3ac3cb04d ("drm/shmem-helpers: Redirect mmap for imported dma-buf")
Cc: <[email protected]>
Cc: Daniel Vetter <[email protected]>
Reported-by: Roman Stratiienko <[email protected]>
Signed-off-by: Boris Brezillon <[email protected]>
Tested-by: Roman Stratiienko <[email protected]>
Reviewed-by: Thomas Zimmermann <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
Ditch it, it has been replace it by the GC transaction API and it has no
clients anymore.
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Set on the NFT_SET_ELEM_DEAD_BIT flag on this element, instead of
performing element removal which might race with an ongoing transaction.
Enable gc when dynamic flag is set on since dynset deletion requires
garbage collection after this patch.
Fixes: d0a8d877da97 ("netfilter: nft_dynset: support for element deletion")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Use the GC transaction API to replace the old and buggy gc API and the
busy mark approach.
No set elements are removed from async garbage collection anymore,
instead the _DEAD bit is set on so the set element is not visible from
lookup path anymore. Async GC enqueues transaction work that might be
aborted and retried later.
rbtree and pipapo set backends does not set on the _DEAD bit from the
sync GC path since this runs in control plane path where mutex is held.
In this case, set elements are deactivated, removed and then released
via RCU callback, sync GC never fails.
Fixes: 3c4287f62044 ("nf_tables: Add set type for arbitrary concatenation of ranges")
Fixes: 8d8540c4f5e0 ("netfilter: nft_set_rbtree: add timeout support")
Fixes: 9d0982927e79 ("netfilter: nft_hash: add support for timeouts")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
The set types rhashtable and rbtree use a GC worker to reclaim memory.
From system work queue, in periodic intervals, a scan of the table is
done.
The major caveat here is that the nft transaction mutex is not held.
This causes a race between control plane and GC when they attempt to
delete the same element.
We cannot grab the netlink mutex from the work queue, because the
control plane has to wait for the GC work queue in case the set is to be
removed, so we get following deadlock:
cpu 1 cpu2
GC work transaction comes in , lock nft mutex
`acquire nft mutex // BLOCKS
transaction asks to remove the set
set destruction calls cancel_work_sync()
cancel_work_sync will now block forever, because it is waiting for the
mutex the caller already owns.
This patch adds a new API that deals with garbage collection in two
steps:
1) Lockless GC of expired elements sets on the NFT_SET_ELEM_DEAD_BIT
so they are not visible via lookup. Annotate current GC sequence in
the GC transaction. Enqueue GC transaction work as soon as it is
full. If ruleset is updated, then GC transaction is aborted and
retried later.
2) GC work grabs the mutex. If GC sequence has changed then this GC
transaction lost race with control plane, abort it as it contains
stale references to objects and let GC try again later. If the
ruleset is intact, then this GC transaction deactivates and removes
the elements and it uses call_rcu() to destroy elements.
Note that no elements are removed from GC lockless path, the _DEAD bit
is set and pointers are collected. GC catchall does not remove the
elements anymore too. There is a new set->dead flag that is set on to
abort the GC transaction to deal with set->ops->destroy() path which
removes the remaining elements in the set from commit_release, where no
mutex is held.
To deal with GC when mutex is held, which allows safe deactivate and
removal, add sync GC API which releases the set element object via
call_rcu(). This is used by rbtree and pipapo backends which also
perform garbage collection from control plane path.
Since element removal from sets can happen from control plane and
element garbage collection/timeout, it is necessary to keep the set
structure alive until all elements have been deactivated and destroyed.
We cannot do a cancel_work_sync or flush_work in nft_set_destroy because
its called with the transaction mutex held, but the aforementioned async
work queue might be blocked on the very mutex that nft_set_destroy()
callchain is sitting on.
This gives us the choice of ABBA deadlock or UaF.
To avoid both, add set->refs refcount_t member. The GC API can then
increment the set refcount and release it once the elements have been
free'd.
Set backends are adapted to use the GC transaction API in a follow up
patch entitled:
("netfilter: nf_tables: use gc transaction API in set backends")
This is joint work with Florian Westphal.
Fixes: cfed7e1b1f8e ("netfilter: nf_tables: add set garbage collection helpers")
Signed-off-by: Pablo Neira Ayuso <[email protected]>
|
|
Pull smb server fixes from Steve French:
"Two ksmbd server fixes, both also for stable:
- improve buffer validation when multiple EAs returned
- missing check for command payload size"
* tag '6.5-rc5-ksmbd-server' of git://git.samba.org/ksmbd:
ksmbd: fix wrong next length validation of ea buffer in smb2_set_ea()
ksmbd: validate command request size
|
|
Add a 200ms delay after sending a ctrl report to Quadro,
Octo, D5 Next and Aquaero to give them enough time to
process the request and save the data to memory. Otherwise,
under heavier userspace loads where multiple sysfs entries
are usually set in quick succession, a new ctrl report could
be requested from the device while it's still processing the
previous one and fail with -EPIPE. The delay is only applied
if two ctrl report operations are near each other in time.
Reported by a user on Github [1] and tested by both of us.
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/82
Fixes: 752b927951ea ("hwmon: (aquacomputer_d5next) Add support for Aquacomputer Octo")
Signed-off-by: Aleksa Savic <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Revert a patch that unconditionally resolved addresses to inlines in
callchains, something that was done before when DWARF mode was asked
for, but could as well be done when just frame pointers (the default)
was selected.
This enriches the callchains with inlines but the way to resolve it
is gross right now, relying on addr2line, and even if we come up with
an efficient way of processing all the associated DWARF info for a
big file as vmlinux is, this has to be something people opt-in, as it
will still result in overheads, so revert it until we get this done
in a saner way.
- Update the x86 msr-index.h header with the kernel original, no change
in tooling output, just addresses a tools/perf build warning.
- Resolve a regression where special "tool events", such as
"duration_time" were being presented for all CPUs, when it only
makes sense to show it for the workload, that is, just once.
* tag 'perf-tools-fixes-for-v6.5-3-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf stat: Don't display zero tool counts
tools arch x86: Sync the msr-index.h copy with the kernel sources
Revert "perf report: Append inlines to non-DWARF callchains"
|
|
Commit 16d7fd3cfa72 ("zonefs: use iomap for synchronous direct writes")
changes zonefs code from a self-built zone append BIO to using iomap for
synchronous direct writes. This change relies on iomap submit BIO
callback to change the write BIO built by iomap to a zone append BIO.
However, this change overlooked the fact that a write BIO may be very
large as it is split when issued. The change from a regular write to a
zone append operation for the built BIO can result in a block layer
warning as zone append BIO are not allowed to be split.
WARNING: CPU: 18 PID: 202210 at block/bio.c:1644 bio_split+0x288/0x350
Call Trace:
? __warn+0xc9/0x2b0
? bio_split+0x288/0x350
? report_bug+0x2e6/0x390
? handle_bug+0x41/0x80
? exc_invalid_op+0x13/0x40
? asm_exc_invalid_op+0x16/0x20
? bio_split+0x288/0x350
bio_split_rw+0x4bc/0x810
? __pfx_bio_split_rw+0x10/0x10
? lockdep_unlock+0xf2/0x250
__bio_split_to_limits+0x1d8/0x900
blk_mq_submit_bio+0x1cf/0x18a0
? __pfx_iov_iter_extract_pages+0x10/0x10
? __pfx_blk_mq_submit_bio+0x10/0x10
? find_held_lock+0x2d/0x110
? lock_release+0x362/0x620
? mark_held_locks+0x9e/0xe0
__submit_bio+0x1ea/0x290
? __pfx___submit_bio+0x10/0x10
? seqcount_lockdep_reader_access.constprop.0+0x82/0x90
submit_bio_noacct_nocheck+0x675/0xa20
? __pfx_bio_iov_iter_get_pages+0x10/0x10
? __pfx_submit_bio_noacct_nocheck+0x10/0x10
iomap_dio_bio_iter+0x624/0x1280
__iomap_dio_rw+0xa22/0x18a0
? lock_is_held_type+0xe3/0x140
? __pfx___iomap_dio_rw+0x10/0x10
? lock_release+0x362/0x620
? zonefs_file_write_iter+0x74c/0xc80 [zonefs]
? down_write+0x13d/0x1e0
iomap_dio_rw+0xe/0x40
zonefs_file_write_iter+0x5ea/0xc80 [zonefs]
do_iter_readv_writev+0x18b/0x2c0
? __pfx_do_iter_readv_writev+0x10/0x10
? inode_security+0x54/0xf0
do_iter_write+0x13b/0x7c0
? lock_is_held_type+0xe3/0x140
vfs_writev+0x185/0x550
? __pfx_vfs_writev+0x10/0x10
? __handle_mm_fault+0x9bd/0x1c90
? find_held_lock+0x2d/0x110
? lock_release+0x362/0x620
? find_held_lock+0x2d/0x110
? lock_release+0x362/0x620
? __up_read+0x1ea/0x720
? do_pwritev+0x136/0x1f0
do_pwritev+0x136/0x1f0
? __pfx_do_pwritev+0x10/0x10
? syscall_enter_from_user_mode+0x22/0x90
? lockdep_hardirqs_on+0x7d/0x100
do_syscall_64+0x58/0x80
This error depends on the hardware used, specifically on the max zone
append bytes and max_[hw_]sectors limits. Tests using AMD Epyc machines
that have low limits did not reveal this issue while runs on Intel Xeon
machines with larger limits trigger it.
Manually splitting the zone append BIO using bio_split_rw() can solve
this issue but also requires issuing the fragment BIOs synchronously
with submit_bio_wait(), to avoid potential reordering of the zone append
BIO fragments, which would lead to data corruption. That is, this
solution is not better than using regular write BIOs which are subject
to serialization using zone write locking at the IO scheduler level.
Given this, fix the issue by removing zone append support and using
regular write BIOs for synchronous direct writes. This allows preseving
the use of iomap and having identical synchronous and asynchronous
sequential file write path. Zone append support will be reintroduced
later through io_uring commands to ensure that the needed special
handling is done correctly.
Reported-by: Shin'ichiro Kawasaki <[email protected]>
Fixes: 16d7fd3cfa72 ("zonefs: use iomap for synchronous direct writes")
Cc: [email protected]
Signed-off-by: Damien Le Moal <[email protected]>
Tested-by: Shin'ichiro Kawasaki <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
|
|
Xu Kuohai says:
====================
bug fixes and a new test case for sockmap.
v3:
fix bpf ci failure
v2: https://lore.kernel.org/bpf/[email protected]
add a test case
v1:
https://lore.kernel.org/bpf/[email protected]
https://lore.kernel.org/bpf/[email protected]
====================
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Add a test case to check whether sockmap redirection works correctly
when data length returned by stream_parser is less than skb->len.
In addition, this test checks whether strp_done is called correctly.
The reason is that we returns skb->len - 1 from the stream_parser, so
the last byte in the skb will be held by strp->skb_head. Therefore,
if strp_done is not called to free strp->skb_head, we'll get a memleak
warning.
Signed-off-by: Xu Kuohai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
BPF CI has reported the following failure:
Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir
Error: #200/79 sockmap_listen/sockmap VSOCK test_vsock_redir
./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1506: ingress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1506: egress: write: Transport endpoint is not connected
vsock_unix_redir_connectible:FAIL:1506
./test_progs:vsock_unix_redir_connectible:1514: ingress: recv() err, errno=11
vsock_unix_redir_connectible:FAIL:1514
./test_progs:vsock_unix_redir_connectible:1518: ingress: vsock socket map failed, a != b
vsock_unix_redir_connectible:FAIL:1518
./test_progs:vsock_unix_redir_connectible:1525: ingress: want pass count 1, have 0
It’s because the recv(... MSG_DONTWAIT) syscall in the test case is
called before the queued work sk_psock_backlog() in the kernel finishes
executing. So the data to be read is still queued in psock->ingress_skb
and cannot be read by the user program. Therefore, the non-blocking
recv() reads nothing and reports an EAGAIN error.
So replace recv(... MSG_DONTWAIT) with xrecv_nonblock(), which calls
select() to wait for data to be readable or timeout before calls recv().
Fixes: d61bd8c1fd02 ("selftests/bpf: add a test case for vsock sockmap")
Signed-off-by: Xu Kuohai <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
strp_done is only called when psock->progs.stream_parser is not NULL,
but stream_parser was set to NULL by sk_psock_stop_strp(), called
by sk_psock_drop() earlier. So, strp_done can never be called.
Introduce SK_PSOCK_RX_ENABLED to mark whether there is strp on psock.
Change the condition for calling strp_done from judging whether
stream_parser is set to judging whether this flag is set. This flag is
only set once when strp_init() succeeds, and will never be cleared later.
Fixes: c0d95d3380ee ("bpf, sockmap: Re-evaluate proto ops when psock is removed from sockmap")
Signed-off-by: Xu Kuohai <[email protected]>
Reviewed-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
sock_map_del_link() operates on both SOCKMAP and SOCKHASH, although
both types have member named "progs", the offset of "progs" member in
these two types is different, so "progs" should be accessed with the
real map type.
Fixes: 604326b41a6f ("bpf, sockmap: convert to generic sk_msg interface")
Signed-off-by: Xu Kuohai <[email protected]>
Reviewed-by: John Fastabend <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
Fix a refcount underflow problem reported by syzbot that can happen
when a system is running out of memory. If xp_alloc_tx_descs() fails,
and it can only fail due to not having enough memory, then the error
path is triggered. In this error path, the refcount of the pool is
decremented as it has incremented before. However, the reference to
the pool in the socket was not nulled. This means that when the socket
is closed later, the socket teardown logic will think that there is a
pool attached to the socket and try to decrease the refcount again,
leading to a refcount underflow.
I chose this fix as it involved adding just a single line. Another
option would have been to move xp_get_pool() and the assignment of
xs->pool to after the if-statement and using xs_umem->pool instead of
xs->pool in the whole if-statement resulting in somewhat simpler code,
but this would have led to much more churn in the code base perhaps
making it harder to backport.
Fixes: ba3beec2ec1d ("xsk: Fix possible crash when multiple sockets are created")
Reported-by: [email protected]
Signed-off-by: Magnus Karlsson <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Martin KaFai Lau <[email protected]>
|
|
The upcoming (and nearly finalized):
https://datatracker.ietf.org/doc/draft-collink-6man-pio-pflag/
will update the IPv6 RA to include a new flag in the PIO field,
which will serve as a hint to perform DHCPv6-PD.
As we don't want DHCPv6 related logic inside the kernel, this piece of
information needs to be exposed to userspace. The simplest option is to
simply expose the entire PIO through the already existing mechanism.
Even without this new flag, the already existing PIO R (router address)
flag (from RFC6275) cannot AFAICT be handled entirely in kernel,
and provides useful information that should be exposed to userspace
(the router's global address, for use by Mobile IPv6).
Also cc'ing stable@ for inclusion in LTS, as while technically this is
not quite a bugfix, and instead more of a feature, it is absolutely
trivial and the alternative is manually cherrypicking into all Android
Common Kernel trees - and I know Greg will ask for it to be sent in via
LTS instead...
Cc: Jen Linkova <[email protected]>
Cc: Lorenzo Colitti <[email protected]>
Cc: David Ahern <[email protected]>
Cc: YOSHIFUJI Hideaki / 吉藤英明 <[email protected]>
Cc: [email protected]
Signed-off-by: Maciej Żenczykowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
Just a few small updates:
* fix an integer overflow in nl80211
* fix rtw89 8852AE disconnections
* fix a buffer overflow in ath12k
* fix AP_VLAN configuration lookups
* fix allocation failure handling in brcm80211
* update MAINTAINERS for some drivers
* tag 'wireless-2023-08-09' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: ath12k: Fix buffer overflow when scanning with extraie
wifi: nl80211: fix integer overflow in nl80211_parse_mbssid_elems()
wifi: cfg80211: fix sband iftype data lookup for AP_VLAN
wifi: rtw89: fix 8852AE disconnection caused by RX full flags
MAINTAINERS: Remove tree entry for rtl8180
MAINTAINERS: Update entry for rtl8187
wifi: brcm80211: handle params_v1 allocation failure
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The q->stats->accounting is not only used by iocost, but iocost only
increase this counter, never decrease it. So queue stats accounting
will always enabled after using iocost once.
Signed-off-by: Chengming Zhou <[email protected]>
Acked-by: Tejun Heo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Normally these two flags do go together, as the issuer of polled IO
generally cannot wait for resources that will get freed as part of IO
completion. This is because that very task is the one that will complete
the request and free those resources, hence that would introduce a
deadlock.
But it is possible to have someone else issue the polled IO, eg via
io_uring if the request is punted to io-wq. For that case, it's fine to
have the task block on IO submission, as it is not the same task that
will be completing the IO.
It's completely up to the caller to ask for both polled and nowait IO
separately! If we don't allow polled IO where IOCB_NOWAIT isn't set in
the kiocb, then we can run into repeated -EAGAIN submissions and not
make any progress.
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Ido Schimmel says:
====================
selftests: forwarding: Various fixes
Fix various problems with forwarding selftests. See individual patches
for problem description and solution.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Some test cases check that the group timer is (or isn't) 0. Instead of
grepping for "0.00" grep for " 0.00" as the former can also match
"260.00" which is the default group membership interval.
Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test")
Reported-by: Mirsad Todorovac <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Tested-by: Mirsad Todorovac <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing
tests with old libnet"), old versions of libnet (used by mausezahn) do
not use the "SO_BINDTODEVICE" socket option. For IP unicast packets,
this can be solved by prefixing mausezahn invocations with "ip vrf
exec". However, IP multicast packets do not perform routing and simply
egress the bound device, which does not exist in this case.
Fix by specifying the source and destination MAC of the packet which
will cause mausezahn to use a packet socket instead of an IP socket.
Fixes: 3446dcd7df05 ("selftests: forwarding: bridge_mdb_max: Add a new selftest")
Reported-by: Mirsad Todorovac <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Tested-by: Mirsad Todorovac <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing
tests with old libnet"), old versions of libnet (used by mausezahn) do
not use the "SO_BINDTODEVICE" socket option. For IP unicast packets,
this can be solved by prefixing mausezahn invocations with "ip vrf
exec". However, IP multicast packets do not perform routing and simply
egress the bound device, which does not exist in this case.
Fix by specifying the source and destination MAC of the packet which
will cause mausezahn to use a packet socket instead of an IP socket.
Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test")
Reported-by: Mirsad Todorovac <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Tested-by: Mirsad Todorovac <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
As explained in commit 8bcfb4ae4d97 ("selftests: forwarding: Fix failing
tests with old libnet"), old versions of libnet (used by mausezahn) do
not use the "SO_BINDTODEVICE" socket option. For IP unicast packets,
this can be solved by prefixing mausezahn invocations with "ip vrf
exec". However, IP multicast packets do not perform routing and simply
egress the bound device, which does not exist in this case.
Fix by specifying the source and destination MAC of the packet which
will cause mausezahn to use a packet socket instead of an IP socket.
Fixes: 8c33266ae26a ("selftests: forwarding: Add layer 2 miss test cases")
Reported-by: Mirsad Todorovac <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Tested-by: Mirsad Todorovac <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The test installs filters that match on various IP fragments (e.g., no
fragment, first fragment) and expects a certain amount of packets to hit
each filter. This is problematic as the filters are not specific enough
and can match IP packets (e.g., IGMP) generated by the stack, resulting
in failures [1].
Fix by making the filters more specific and match on more fields in the
IP header: Source IP, destination IP and protocol.
[1]
# timeout set to 0
# selftests: net/forwarding: tc_tunnel_key.sh
# TEST: tunnel_key nofrag (skip_hw) [FAIL]
# packet smaller than MTU was not tunneled
# INFO: Could not test offloaded functionality
not ok 89 selftests: net/forwarding: tc_tunnel_key.sh # exit=1
Fixes: 533a89b1940f ("selftests: forwarding: add tunnel_key "nofrag" test case")
Reported-by: Mirsad Todorovac <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Tested-by: Mirsad Todorovac <[email protected]>
Acked-by: Davide Caratti <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The test checks that filters that match on source or destination MAC
were only hit once. A host can send more than one packet with a given
source or destination MAC, resulting in failures.
Fix by relaxing the success criterion and instead check that the filters
were not hit zero times. Using tc_check_at_least_x_packets() is also an
option, but it is not available in older kernels.
Fixes: 07e5c75184a1 ("selftests: forwarding: Introduce tc flower matching tests")
Reported-by: Mirsad Todorovac <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Tested-by: Mirsad Todorovac <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The test relies on 'nc' being the netcat version from the nmap project.
While this seems to be the case on Fedora, it is not the case on Ubuntu,
resulting in failures such as [1].
Fix by explicitly using the 'ncat' utility from the nmap project and the
skip the test in case it is not installed.
[1]
# timeout set to 0
# selftests: net/forwarding: tc_actions.sh
# TEST: gact drop and ok (skip_hw) [ OK ]
# TEST: mirred egress flower redirect (skip_hw) [ OK ]
# TEST: mirred egress flower mirror (skip_hw) [ OK ]
# TEST: mirred egress matchall mirror (skip_hw) [ OK ]
# TEST: mirred_egress_to_ingress (skip_hw) [ OK ]
# nc: invalid option -- '-'
# usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl]
# [-m minttl] [-O length] [-P proxy_username] [-p source_port]
# [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit]
# [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]]
# [destination] [port]
# nc: invalid option -- '-'
# usage: nc [-46CDdFhklNnrStUuvZz] [-I length] [-i interval] [-M ttl]
# [-m minttl] [-O length] [-P proxy_username] [-p source_port]
# [-q seconds] [-s sourceaddr] [-T keyword] [-V rtable] [-W recvlimit]
# [-w timeout] [-X proxy_protocol] [-x proxy_address[:port]]
# [destination] [port]
# TEST: mirred_egress_to_ingress_tcp (skip_hw) [FAIL]
# server output check failed
# INFO: Could not test offloaded functionality
not ok 80 selftests: net/forwarding: tc_actions.sh # exit=1
Fixes: ca22da2fbd69 ("act_mirred: use the backlog for nested calls to mirred ingress")
Reported-by: Mirsad Todorovac <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Tested-by: Mirsad Todorovac <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
MAC Merge cannot be tested with veth pairs, resulting in failures:
# ./ethtool_mm.sh
[...]
TEST: Manual configuration with verification: swp1 to swp2 [FAIL]
Verification did not succeed
Fix by skipping the test when the interfaces do not support MAC Merge.
Fixes: e6991384ace5 ("selftests: forwarding: add a test for MAC Merge layer")
Reported-by: Mirsad Todorovac <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Layer 3 hardware stats cannot be used when the underlying interfaces are
veth pairs, resulting in failures:
# ./hw_stats_l3_gre.sh
TEST: ping gre flat [ OK ]
TEST: Test rx packets: [FAIL]
Traffic not reflected in the counter: 0 -> 0
TEST: Test tx packets: [FAIL]
Traffic not reflected in the counter: 0 -> 0
Fix by skipping the test when used with veth pairs.
Fixes: 813f97a26860 ("selftests: forwarding: Add a tunnel-based test for L3 HW stats")
Reported-by: Mirsad Todorovac <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Tested-by: Mirsad Todorovac <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Ethtool extended state cannot be tested with veth pairs, resulting in
failures:
# ./ethtool_extended_state.sh
TEST: Autoneg, No partner detected [FAIL]
Expected "Autoneg", got "Link detected: no"
[...]
Fix by skipping the test when used with veth pairs.
Fixes: 7d10bcce98cd ("selftests: forwarding: Add tests for ethtool extended state")
Reported-by: Mirsad Todorovac <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Tested-by: Mirsad Todorovac <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Auto-negotiation cannot be tested with veth pairs, resulting in
failures:
# ./ethtool.sh
TEST: force of same speed autoneg off [FAIL]
error in configuration. swp1 speed Not autoneg off
[...]
Fix by skipping the test when used with veth pairs.
Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test")
Reported-by: Mirsad Todorovac <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Tested-by: Mirsad Todorovac <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
A handful of tests require physical loopbacks to be used instead of veth
pairs. Add a helper that these tests will invoke in order to be skipped
when executed with veth pairs.
Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test")
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Tested-by: Mirsad Todorovac <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The test uses the 'TROUTE6' environment variable to encode the name of
the IPv6 traceroute utility. By default (without a configuration file),
this variable is not set, resulting in failures:
# ./ip6_forward_instats_vrf.sh
TEST: ping6 [ OK ]
TEST: Ip6InTooBigErrors [ OK ]
TEST: Ip6InHdrErrors [FAIL]
TEST: Ip6InAddrErrors [ OK ]
TEST: Ip6InDiscards [ OK ]
Fix by setting a default utility name and skip the test if the utility
is not present.
Fixes: 0857d6f8c759 ("ipv6: When forwarding count rx stats on the orig netdev")
Reported-by: Mirsad Todorovac <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Tested-by: Mirsad Todorovac <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The selftest relies on iproute2 changes present in version 6.3, but the
test does not check for it, resulting in errors:
# ./bridge_mdb_max.sh
INFO: 802.1d tests
TEST: cfg4: port: ngroups reporting [FAIL]
Number of groups was null, now is null, but 5 expected
TEST: ctl4: port: ngroups reporting [FAIL]
Number of groups was null, now is null, but 5 expected
TEST: cfg6: port: ngroups reporting [FAIL]
Number of groups was null, now is null, but 5 expected
[...]
Fix by skipping the test if iproute2 is too old.
Fixes: 3446dcd7df05 ("selftests: forwarding: bridge_mdb_max: Add a new selftest")
Reported-by: Mirsad Todorovac <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Tested-by: Mirsad Todorovac <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The selftest relies on iproute2 changes present in version 6.3, but the
test does not check for it, resulting in error:
# ./bridge_mdb.sh
INFO: # Host entries configuration tests
TEST: Common host entries configuration tests (IPv4) [FAIL]
Managed to add IPv4 host entry with a filter mode
TEST: Common host entries configuration tests (IPv6) [FAIL]
Managed to add IPv6 host entry with a filter mode
TEST: Common host entries configuration tests (L2) [FAIL]
Managed to add L2 host entry with a filter mode
INFO: # Port group entries configuration tests - (*, G)
Command "replace" is unknown, try "bridge mdb help".
[...]
Fix by skipping the test if iproute2 is too old.
Fixes: b6d00da08610 ("selftests: forwarding: Add bridge MDB test")
Reported-by: Mirsad Todorovac <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Tested-by: Mirsad Todorovac <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The default timeout for selftests is 45 seconds, but it is not enough
for forwarding selftests which can takes minutes to finish depending on
the number of tests cases:
# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
TAP version 13
1..102
# timeout set to 45
# selftests: net/forwarding: bridge_igmp.sh
# TEST: IGMPv2 report 239.10.10.10 [ OK ]
# TEST: IGMPv2 leave 239.10.10.10 [ OK ]
# TEST: IGMPv3 report 239.10.10.10 is_include [ OK ]
# TEST: IGMPv3 report 239.10.10.10 include -> allow [ OK ]
#
not ok 1 selftests: net/forwarding: bridge_igmp.sh # TIMEOUT 45 seconds
Fix by switching off the timeout and setting it to 0. A similar change
was done for BPF selftests in commit 6fc5916cc256 ("selftests: bpf:
Switch off timeout").
Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests")
Reported-by: Mirsad Todorovac <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Tested-by: Mirsad Todorovac <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
As explained in [1], the forwarding selftests are meant to be run with
either physical loopbacks or veth pairs. The interfaces are expected to
be specified in a user-provided forwarding.config file or as command
line arguments. By default, this file is not present and the tests fail:
# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
[...]
TAP version 13
1..102
# timeout set to 45
# selftests: net/forwarding: bridge_igmp.sh
# Command line is not complete. Try option "help"
# Failed to create netif
not ok 1 selftests: net/forwarding: bridge_igmp.sh # exit=1
[...]
Fix by skipping a test if interfaces are not provided either via the
configuration file or command line arguments.
# make -C tools/testing/selftests TARGETS=net/forwarding run_tests
[...]
TAP version 13
1..102
# timeout set to 45
# selftests: net/forwarding: bridge_igmp.sh
# SKIP: Cannot create interface. Name not specified
ok 1 selftests: net/forwarding: bridge_igmp.sh # SKIP
[1] tools/testing/selftests/net/forwarding/README
Fixes: 81573b18f26d ("selftests/net/forwarding: add Makefile to install tests")
Reported-by: Mirsad Todorovac <[email protected]>
Closes: https://lore.kernel.org/netdev/[email protected]/
Signed-off-by: Ido Schimmel <[email protected]>
Reviewed-by: Petr Machata <[email protected]>
Tested-by: Mirsad Todorovac <[email protected]>
Reviewed-by: Hangbin Liu <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Before this code is copied, add the missing family, as we did in
commit 3dd344ea84e1 ("net: tracepoint: exposing sk_family in all tcp:tracepoints")
Fixes: 15fcdf6ae116 ("tcp: Add tracepoint for tcp_set_ca_state")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Ping Gan <[email protected]>
Cc: Manjusaka <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|