aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-04-26netdevsim: add bus attributes to add new and delete devicesJiri Pirko3-4/+99
Add a way to add new netdevsim device on netdevsim bus and also to delete existing netdevsim device from the bus. Track the bus devices in using a list. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-26netdevsim: use ida for bus device idsJiri Pirko1-3/+10
Instead of increments of u32 value, use ida to manage bus device ids. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-26netdevsim: add stub netdevsim driver implementationJiri Pirko1-1/+20
In order to bus probing to work correctly, register a simple netdevsim driver implementation. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-26netdevsim: move device registration and related code to bus.cJiri Pirko4-163/+207
Move netdevsim device registration into bus.c and alongside with that the related sysfs attributes. Introduce new struct nsim_bus_dev to represent a netdevsim device on netdevsim bus. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-26netdevsim: put netdevsim bus code into separate fileJiri Pirko4-13/+38
As the code related to netdevsim bus is going to get bigger, move the existing code to a separate file. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-26netdevsim: rename devlink.c to dev.c to contain per-dev(asic) itemsJiri Pirko4-59/+56
The existing devlink.c code is going to be extended to represent asic device on a bus. As this is about more than just devlink, rename the file. Do appropriate prefix renaming alongside with that. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-26netdevsim: create devlink instance per netdevsim instanceJiri Pirko4-202/+124
Currently there is one devlink instance created per network namespace. That is quite odd considering the fact that devlink instance should represent an ASIC. The following patches are going to move the devlink instance even more down to a bus device, but until then, have one devlink instance per netdevsim instance. Struct nsim_devlink is introduced to hold fib setting. The changes in the fib code are only related to holding the configuration per devlink instance instead of network namespace. Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-26netdevsim: move device registration on bus to be done earlier in initJiri Pirko1-13/+13
As a dependency of the subsequent patch, mode device registration to be done earlier, directly in nsim_newlink(). Signed-off-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-26Merge branch 'for-upstream' of ↵David S. Miller22-62/+1246
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next Johan Hedberg says: ==================== pull request: bluetooth-next 2019-04-25 Here's the main bluetooth-next pull request for the 5.2 kernel. - Added support for Mediatek SDIO controllers - Added support for Broadcom BCM2076B1 UART controller - Added support for Marvel SD8987 chipset - Fix buffer overflow bug in hidp protocol - Various other smaller fixes & improvements Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-04-25Merge branch 'btf-dump'Alexei Starovoitov12-19/+882
Andrii Nakryiko says: ==================== This patch set adds a new `bpftool btf dump` sub-command, which allows to dump BTF contents (only types for now). Currently it only outputs low-level content, almost 1:1 with binary BTF format, but follow up patches will add ability to dump BTF types as a compilable C header file. JSON output is supported as well. Patch #1 adds `btf` sub-command, dumping BTF types in human-readable format. It also implements reading .BTF data from ELF file. Patch #2 adds minimal documentation with output format examples and different ways to specify source of BTF data. Patch #3 adds support for btf command in bash-completion/bpftool script. Patch #4 fixes minor indentation issue in bash-completion script. Output format is mostly following existing format of BPF verifier log, but deviates from it in few places. More details are in commit message for patch 1. Example of output for all supported BTF kinds are in patch #2 as part of documentation. Some field names are quite verbose and I'd rather shorten them, if we don't feel like being very close to BPF verifier names is a necessity, but in this patch I left them exactly the same as in verifier log. v3->v4: - reverse Christmas tree (Quentin) - better docs (Quentin) v2->v3: - make map's key|value|kv|all suggestion more precise (Quentin) - fix default case indentations (Quentin) v1->v2: - fix unnecessary trailing whitespaces in bpftool-btf.rst (Yonghong) - add btf in main.c for a list of possible OBJECTs - handle unknown keyword under `bpftool btf dump` (Yonghong) ==================== Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-25bpftool: fix indendation in bash-completion/bpftoolAndrii Nakryiko1-11/+11
Fix misaligned default case branch for `prog dump` sub-command. Reported-by: Quentin Monnet <[email protected]> Cc: Yonghong Song <[email protected]> Reviewed-by: Quentin Monnet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-25bpftool: add bash completions for btf commandAndrii Nakryiko1-0/+46
Add full support for btf command in bash-completion script. Cc: Quentin Monnet <[email protected]> Cc: Yonghong Song <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Daniel Borkmann <[email protected]> Reviewed-by: Quentin Monnet <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-25bpftool/docs: add btf sub-command documentationAndrii Nakryiko8-7/+236
Document usage and sample output format for `btf dump` sub-command. Cc: Daniel Borkmann <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Yonghong Song <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Song Liu <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-25bpftool: add ability to dump BTF typesAndrii Nakryiko3-1/+589
Add new `btf dump` sub-command to bpftool. It allows to dump human-readable low-level BTF types representation of BTF types. BTF can be retrieved from few different sources: - from BTF object by ID; - from PROG, if it has associated BTF; - from MAP, if it has associated BTF data; it's possible to narrow down types to either key type, value type, both, or all BTF types; - from ELF file (.BTF section). Output format mostly follows BPF verifier log format with few notable exceptions: - all the type/field/param/etc names are enclosed in single quotes to allow easier grepping and to stand out a little bit more; - FUNC_PROTO output follows STRUCT/UNION/ENUM format of having one line per each argument; this is more uniform and allows easy grepping, as opposed to succinct, but inconvenient format that BPF verifier log is using. Cc: Daniel Borkmann <[email protected]> Cc: Alexei Starovoitov <[email protected]> Cc: Yonghong Song <[email protected]> Cc: Martin KaFai Lau <[email protected]> Cc: Song Liu <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller247-715/+1881
Two easy cases of overlapping changes. Signed-off-by: David S. Miller <[email protected]>
2019-04-25bpftool: Fix errno variable usageBenjamin Poirier1-1/+1
The test meant to use the saved value of errno. Given the current code, it makes no practical difference however. Fixes: bf598a8f0f77 ("bpftool: Improve handling of ENOENT on map dumps") Signed-off-by: Benjamin Poirier <[email protected]> Reviewed-by: Quentin Monnet <[email protected]> Acked-by: Song Liu <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-25bpftool: show flow_dissector attachment statusStanislav Fomichev1-0/+54
Right now there is no way to query whether BPF flow_dissector program is attached to a network namespace or not. In previous commit, I added support for querying that info, show it when doing `bpftool net`: $ bpftool prog loadall ./bpf_flow.o \ /sys/fs/bpf/flow type flow_dissector \ pinmaps /sys/fs/bpf/flow $ bpftool prog 3: flow_dissector name _dissect tag 8c9e917b513dd5cc gpl loaded_at 2019-04-23T16:14:48-0700 uid 0 xlated 656B jited 461B memlock 4096B map_ids 1,2 btf_id 1 ... $ bpftool net -j [{"xdp":[],"tc":[],"flow_dissector":[]}] $ bpftool prog attach pinned \ /sys/fs/bpf/flow/flow_dissector flow_dissector $ bpftool net -j [{"xdp":[],"tc":[],"flow_dissector":["id":3]}] Doesn't show up in a different net namespace: $ ip netns add test $ ip netns exec test bpftool net -j [{"xdp":[],"tc":[],"flow_dissector":[]}] Non-json output: $ bpftool net xdp: tc: flow_dissector: id 3 v2: * initialization order (Jakub Kicinski) * clear errno for batch mode (Quentin Monnet) Signed-off-by: Stanislav Fomichev <[email protected]> Reviewed-by: Quentin Monnet <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-25bpf: support BPF_PROG_QUERY for BPF_FLOW_DISSECTOR attach_typeStanislav Fomichev3-0/+49
target_fd is target namespace. If there is a flow dissector BPF program attached to that namespace, its (single) id is returned. v5: * drop net ref right after rcu unlock (Daniel Borkmann) v4: * add missing put_net (Jann Horn) v3: * add missing inline to skb_flow_dissector_prog_query static def (kbuild test robot <[email protected]>) v2: * don't sleep in rcu critical section (Jakub Kicinski) * check input prog_cnt (exit early) Cc: Jann Horn <[email protected]> Signed-off-by: Stanislav Fomichev <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-25samples: bpf: add hbm sample to .gitignoreDaniel T. Lee1-0/+1
This commit adds hbm to .gitignore which is currently ommited from the ignore file. Signed-off-by: Daniel T. Lee <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-25libbpf: fix samples/bpf build failure due to undefined UINT32_MAXDaniel T. Lee1-0/+1
Currently, building bpf samples will cause the following error. ./tools/lib/bpf/bpf.h:132:27: error: 'UINT32_MAX' undeclared here (not in a function) .. #define BPF_LOG_BUF_SIZE (UINT32_MAX >> 8) /* verifier maximum in kernels <= 5.1 */ ^ ./samples/bpf/bpf_load.h:31:25: note: in expansion of macro 'BPF_LOG_BUF_SIZE' extern char bpf_log_buf[BPF_LOG_BUF_SIZE]; ^~~~~~~~~~~~~~~~ Due to commit 4519efa6f8ea ("libbpf: fix BPF_LOG_BUF_SIZE off-by-one error") hard-coded size of BPF_LOG_BUF_SIZE has been replaced with UINT32_MAX which is defined in <stdint.h> header. Even with this change, bpf selftests are running fine since these are built with clang and it includes header(-idirafter) from clang/6.0.0/include. (it has <stdint.h>) clang -I. -I./include/uapi -I../../../include/uapi -idirafter /usr/local/include -idirafter /usr/include \ -idirafter /usr/lib/llvm-6.0/lib/clang/6.0.0/include -idirafter /usr/include/x86_64-linux-gnu \ -Wno-compare-distinct-pointer-types -O2 -target bpf -emit-llvm -c progs/test_sysctl_prog.c -o - | \ llc -march=bpf -mcpu=generic -filetype=obj -o /linux/tools/testing/selftests/bpf/test_sysctl_prog.o But bpf samples are compiled with GCC, and it only searches and includes headers declared at the target file. As '#include <stdint.h>' hasn't been declared in tools/lib/bpf/bpf.h, it causes build failure of bpf samples. gcc -Wp,-MD,./samples/bpf/.sockex3_user.o.d -Wall -Wmissing-prototypes -Wstrict-prototypes \ -O2 -fomit-frame-pointer -std=gnu89 -I./usr/include -I./tools/lib/ -I./tools/testing/selftests/bpf/ \ -I./tools/ lib/ -I./tools/include -I./tools/perf -c -o ./samples/bpf/sockex3_user.o ./samples/bpf/sockex3_user.c; This commit add declaration of '#include <stdint.h>' to tools/lib/bpf/bpf.h to fix this problem. Signed-off-by: Daniel T. Lee <[email protected]> Acked-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2019-04-25Merge branch 'libbpf-fixes'Alexei Starovoitov1-16/+89
Daniel Borkmann says: ==================== Two small fixes in relation to global data handling. Thanks! ==================== Acked-by: Andrii Nakryiko <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-25bpf, libbpf: fix segfault in bpf_object__init_maps' pr_debug statementDaniel Borkmann1-3/+3
Ran into it while testing; in bpf_object__init_maps() data can be NULL in the case where no map section is present. Therefore we simply cannot access data->d_size before NULL test. Move the pr_debug() where it's safe to access. Fixes: d859900c4c56 ("bpf, libbpf: support global data/bss/rodata sections") Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-25bpf, libbpf: handle old kernels more graceful wrt global data sectionsDaniel Borkmann1-13/+86
Andrii reported a corner case where e.g. global static data is present in the BPF ELF file in form of .data/.bss/.rodata section, but without any relocations to it. Such programs could be loaded before commit d859900c4c56 ("bpf, libbpf: support global data/bss/rodata sections"), whereas afterwards if kernel lacks support then loading would fail. Add a probing mechanism which skips setting up libbpf internal maps in case of missing kernel support. In presence of relocation entries, we abort the load attempt. Fixes: d859900c4c56 ("bpf, libbpf: support global data/bss/rodata sections") Reported-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2019-04-25Bluetooth: Align minimum encryption key size for LE and BR/EDR connectionsMarcel Holtmann2-0/+11
The minimum encryption key size for LE connections is 56 bits and to align LE with BR/EDR, enforce 56 bits of minimum encryption key size for BR/EDR connections as well. Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Johan Hedberg <[email protected]> Cc: [email protected]
2019-04-24Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds61-184/+687
Pull networking fixes from David Miller: "Just the usual assortment of small'ish fixes: 1) Conntrack timeout is sometimes not initialized properly, from Alexander Potapenko. 2) Add a reasonable range limit to tcp_min_rtt_wlen to avoid undefined behavior. From ZhangXiaoxu. 3) des1 field of descriptor in stmmac driver is initialized with the wrong variable. From Yue Haibing. 4) Increase mlxsw pci sw reset timeout a little bit more, from Ido Schimmel. 5) Match IOT2000 stmmac devices more accurately, from Su Bao Cheng. 6) Fallback refcount fix in TLS code, from Jakub Kicinski. 7) Fix max MTU check when using XDP in mlx5, from Maxim Mikityanskiy. 8) Fix recursive locking in team driver, from Hangbin Liu. 9) Fix tls_set_device_offload_Rx() deadlock, from Jakub Kicinski. 10) Don't use napi_alloc_frag() outside of softiq context of socionext driver, from Ilias Apalodimas. 11) MAC address increment overflow in ncsi, from Tao Ren. 12) Fix a regression in 8K/1M pool switching of RDS, from Zhu Yanjun. 13) ipv4_link_failure has to validate the headers that are actually there because RAW sockets can pass in arbitrary garbage, from Eric Dumazet" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (43 commits) ipv4: add sanity checks in ipv4_link_failure() net/rose: fix unbound loop in rose_loopback_timer() rxrpc: fix race condition in rxrpc_input_packet() net: rds: exchange of 8K and 1M pool net: vrf: Fix operation not supported when set vrf mac net/ncsi: handle overflow when incrementing mac address net: socionext: replace napi_alloc_frag with the netdev variant on init net: atheros: fix spelling mistake "underun" -> "underrun" spi: ST ST95HF NFC: declare missing of table spi: Micrel eth switch: declare missing of table net: stmmac: move stmmac_check_ether_addr() to driver probe netfilter: fix nf_l4proto_log_invalid to log invalid packets netfilter: never get/set skb->tstamp netfilter: ebtables: CONFIG_COMPAT: drop a bogus WARN_ON Documentation: decnet: remove reference to CONFIG_DECNET_ROUTE_FWMARK dt-bindings: add an explanation for internal phy-mode net/tls: don't leak IV and record seq when offload fails net/tls: avoid potential deadlock in tls_set_device_offload_rx() selftests/net: correct the return value for run_afpackettests team: fix possible recursive locking when add slaves ...
2019-04-24Merge tag 'leds-for-5.1-rc7' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED update from Jacek Anaszewski: "A single change to MAINTAINERS: We announce a new LED reviewer - Dan Murphy" * tag 'leds-for-5.1-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: MAINTAINERS: LEDs: Add designated reviewer for LED subsystem
2019-04-24ipv4: add sanity checks in ipv4_link_failure()Eric Dumazet1-9/+23
Before calling __ip_options_compile(), we need to ensure the network header is a an IPv4 one, and that it is already pulled in skb->head. RAW sockets going through a tunnel can end up calling ipv4_link_failure() with total garbage in the skb, or arbitrary lengthes. syzbot report : BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:355 [inline] BUG: KASAN: stack-out-of-bounds in __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 Write of size 69 at addr ffff888096abf068 by task syz-executor.4/9204 CPU: 0 PID: 9204 Comm: syz-executor.4 Not tainted 5.1.0-rc5+ #77 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187 kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317 check_memory_region_inline mm/kasan/generic.c:185 [inline] check_memory_region+0x123/0x190 mm/kasan/generic.c:191 memcpy+0x38/0x50 mm/kasan/common.c:133 memcpy include/linux/string.h:355 [inline] __ip_options_echo+0x294/0x1120 net/ipv4/ip_options.c:123 __icmp_send+0x725/0x1400 net/ipv4/icmp.c:695 ipv4_link_failure+0x29f/0x550 net/ipv4/route.c:1204 dst_link_failure include/net/dst.h:427 [inline] vti6_xmit net/ipv6/ip6_vti.c:514 [inline] vti6_tnl_xmit+0x10d4/0x1c0c net/ipv6/ip6_vti.c:553 __netdev_start_xmit include/linux/netdevice.h:4414 [inline] netdev_start_xmit include/linux/netdevice.h:4423 [inline] xmit_one net/core/dev.c:3292 [inline] dev_hard_start_xmit+0x1b2/0x980 net/core/dev.c:3308 __dev_queue_xmit+0x271d/0x3060 net/core/dev.c:3878 dev_queue_xmit+0x18/0x20 net/core/dev.c:3911 neigh_direct_output+0x16/0x20 net/core/neighbour.c:1527 neigh_output include/net/neighbour.h:508 [inline] ip_finish_output2+0x949/0x1740 net/ipv4/ip_output.c:229 ip_finish_output+0x73c/0xd50 net/ipv4/ip_output.c:317 NF_HOOK_COND include/linux/netfilter.h:278 [inline] ip_output+0x21f/0x670 net/ipv4/ip_output.c:405 dst_output include/net/dst.h:444 [inline] NF_HOOK include/linux/netfilter.h:289 [inline] raw_send_hdrinc net/ipv4/raw.c:432 [inline] raw_sendmsg+0x1d2b/0x2f20 net/ipv4/raw.c:663 inet_sendmsg+0x147/0x5d0 net/ipv4/af_inet.c:798 sock_sendmsg_nosec net/socket.c:651 [inline] sock_sendmsg+0xdd/0x130 net/socket.c:661 sock_write_iter+0x27c/0x3e0 net/socket.c:988 call_write_iter include/linux/fs.h:1866 [inline] new_sync_write+0x4c7/0x760 fs/read_write.c:474 __vfs_write+0xe4/0x110 fs/read_write.c:487 vfs_write+0x20c/0x580 fs/read_write.c:549 ksys_write+0x14f/0x2d0 fs/read_write.c:599 __do_sys_write fs/read_write.c:611 [inline] __se_sys_write fs/read_write.c:608 [inline] __x64_sys_write+0x73/0xb0 fs/read_write.c:608 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x458c29 Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 RSP: 002b:00007f293b44bc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458c29 RDX: 0000000000000014 RSI: 00000000200002c0 RDI: 0000000000000003 RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007f293b44c6d4 R13: 00000000004c8623 R14: 00000000004ded68 R15: 00000000ffffffff The buggy address belongs to the page: page:ffffea00025aafc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0 flags: 0x1fffc0000000000() raw: 01fffc0000000000 0000000000000000 ffffffff025a0101 0000000000000000 raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888096abef80: 00 00 00 f2 f2 f2 f2 f2 00 00 00 00 00 00 00 f2 ffff888096abf000: f2 f2 f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 >ffff888096abf080: 00 00 f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 ^ ffff888096abf100: 00 00 00 00 f1 f1 f1 f1 00 00 f3 f3 00 00 00 00 ffff888096abf180: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 Fixes: ed0de45a1008 ("ipv4: recompile ip options in ipv4_link_failure") Signed-off-by: Eric Dumazet <[email protected]> Cc: Stephen Suryaputra <[email protected]> Acked-by: Willem de Bruijn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-24net/rose: fix unbound loop in rose_loopback_timer()Eric Dumazet1-11/+16
This patch adds a limit on the number of skbs that fuzzers can queue into loopback_queue. 1000 packets for rose loopback seems more than enough. Then, since we now have multiple cpus in most linux hosts, we also need to limit the number of skbs rose_loopback_timer() can dequeue at each round. rose_loopback_queue() can be drop-monitor friendly, calling consume_skb() or kfree_skb() appropriately. Finally, use mod_timer() instead of del_timer() + add_timer() syzbot report was : rcu: INFO: rcu_preempt self-detected stall on CPU rcu: 0-...!: (10499 ticks this GP) idle=536/1/0x4000000000000002 softirq=103291/103291 fqs=34 rcu: (t=10500 jiffies g=140321 q=323) rcu: rcu_preempt kthread starved for 10426 jiffies! g140321 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=1 rcu: RCU grace-period kthread stack dump: rcu_preempt I29168 10 2 0x80000000 Call Trace: context_switch kernel/sched/core.c:2877 [inline] __schedule+0x813/0x1cc0 kernel/sched/core.c:3518 schedule+0x92/0x180 kernel/sched/core.c:3562 schedule_timeout+0x4db/0xfd0 kernel/time/timer.c:1803 rcu_gp_fqs_loop kernel/rcu/tree.c:1971 [inline] rcu_gp_kthread+0x962/0x17b0 kernel/rcu/tree.c:2128 kthread+0x357/0x430 kernel/kthread.c:253 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:352 NMI backtrace for cpu 0 CPU: 0 PID: 7632 Comm: kworker/0:4 Not tainted 5.1.0-rc5+ #172 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: events iterate_cleanup_work Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x172/0x1f0 lib/dump_stack.c:113 nmi_cpu_backtrace.cold+0x63/0xa4 lib/nmi_backtrace.c:101 nmi_trigger_cpumask_backtrace+0x1be/0x236 lib/nmi_backtrace.c:62 arch_trigger_cpumask_backtrace+0x14/0x20 arch/x86/kernel/apic/hw_nmi.c:38 trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline] rcu_dump_cpu_stacks+0x183/0x1cf kernel/rcu/tree.c:1223 print_cpu_stall kernel/rcu/tree.c:1360 [inline] check_cpu_stall kernel/rcu/tree.c:1434 [inline] rcu_pending kernel/rcu/tree.c:3103 [inline] rcu_sched_clock_irq.cold+0x500/0xa4a kernel/rcu/tree.c:2544 update_process_times+0x32/0x80 kernel/time/timer.c:1635 tick_sched_handle+0xa2/0x190 kernel/time/tick-sched.c:161 tick_sched_timer+0x47/0x130 kernel/time/tick-sched.c:1271 __run_hrtimer kernel/time/hrtimer.c:1389 [inline] __hrtimer_run_queues+0x33e/0xde0 kernel/time/hrtimer.c:1451 hrtimer_interrupt+0x314/0x770 kernel/time/hrtimer.c:1509 local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1035 [inline] smp_apic_timer_interrupt+0x120/0x570 arch/x86/kernel/apic/apic.c:1060 apic_timer_interrupt+0xf/0x20 arch/x86/entry/entry_64.S:807 RIP: 0010:__sanitizer_cov_trace_pc+0x0/0x50 kernel/kcov.c:95 Code: 89 25 b4 6e ec 08 41 bc f4 ff ff ff e8 cd 5d ea ff 48 c7 05 9e 6e ec 08 00 00 00 00 e9 a4 e9 ff ff 90 90 90 90 90 90 90 90 90 <55> 48 89 e5 48 8b 75 08 65 48 8b 04 25 00 ee 01 00 65 8b 15 c8 60 RSP: 0018:ffff8880ae807ce0 EFLAGS: 00000286 ORIG_RAX: ffffffffffffff13 RAX: ffff88806fd40640 RBX: dffffc0000000000 RCX: ffffffff863fbc56 RDX: 0000000000000100 RSI: ffffffff863fbc1d RDI: ffff88808cf94228 RBP: ffff8880ae807d10 R08: ffff88806fd40640 R09: ffffed1015d00f8b R10: ffffed1015d00f8a R11: 0000000000000003 R12: ffff88808cf941c0 R13: 00000000fffff034 R14: ffff8882166cd840 R15: 0000000000000000 rose_loopback_timer+0x30d/0x3f0 net/rose/rose_loopback.c:91 call_timer_fn+0x190/0x720 kernel/time/timer.c:1325 expire_timers kernel/time/timer.c:1362 [inline] __run_timers kernel/time/timer.c:1681 [inline] __run_timers kernel/time/timer.c:1649 [inline] run_timer_softirq+0x652/0x1700 kernel/time/timer.c:1694 __do_softirq+0x266/0x95a kernel/softirq.c:293 do_softirq_own_stack+0x2a/0x40 arch/x86/entry/entry_64.S:1027 Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-24rxrpc: fix race condition in rxrpc_input_packet()Eric Dumazet2-5/+10
After commit 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook"), rxrpc_input_packet() is directly called from lockless UDP receive path, under rcu_read_lock() protection. It must therefore use RCU rules : - udp_sk->sk_user_data can be cleared at any point in this function. rcu_dereference_sk_user_data() is what we need here. - Also, since sk_user_data might have been set in rxrpc_open_socket() we must observe a proper RCU grace period before kfree(local) in rxrpc_lookup_local() v4: @local can be NULL in xrpc_lookup_local() as reported by kbuild test robot <[email protected]> and Julia Lawall <[email protected]>, thanks ! v3,v2 : addressed David Howells feedback, thanks ! syzbot reported : kasan: CONFIG_KASAN_INLINE enabled kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN CPU: 0 PID: 19236 Comm: syz-executor703 Not tainted 5.1.0-rc6 #79 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__lock_acquire+0xbef/0x3fb0 kernel/locking/lockdep.c:3573 Code: 00 0f 85 a5 1f 00 00 48 81 c4 10 01 00 00 5b 41 5c 41 5d 41 5e 41 5f 5d c3 48 b8 00 00 00 00 00 fc ff df 4c 89 ea 48 c1 ea 03 <80> 3c 02 00 0f 85 4a 21 00 00 49 81 7d 00 20 54 9c 89 0f 84 cf f4 RSP: 0018:ffff88809d7aef58 EFLAGS: 00010002 RAX: dffffc0000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000026 RSI: 0000000000000000 RDI: 0000000000000001 RBP: ffff88809d7af090 R08: 0000000000000001 R09: 0000000000000001 R10: ffffed1015d05bc7 R11: ffff888089428600 R12: 0000000000000000 R13: 0000000000000130 R14: 0000000000000001 R15: 0000000000000001 FS: 00007f059044d700(0000) GS:ffff8880ae800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004b6040 CR3: 00000000955ca000 CR4: 00000000001406f0 Call Trace: lock_acquire+0x16f/0x3f0 kernel/locking/lockdep.c:4211 __raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline] _raw_spin_lock_irqsave+0x95/0xcd kernel/locking/spinlock.c:152 skb_queue_tail+0x26/0x150 net/core/skbuff.c:2972 rxrpc_reject_packet net/rxrpc/input.c:1126 [inline] rxrpc_input_packet+0x4a0/0x5536 net/rxrpc/input.c:1414 udp_queue_rcv_one_skb+0xaf2/0x1780 net/ipv4/udp.c:2011 udp_queue_rcv_skb+0x128/0x730 net/ipv4/udp.c:2085 udp_unicast_rcv_skb.isra.0+0xb9/0x360 net/ipv4/udp.c:2245 __udp4_lib_rcv+0x701/0x2ca0 net/ipv4/udp.c:2301 udp_rcv+0x22/0x30 net/ipv4/udp.c:2482 ip_protocol_deliver_rcu+0x60/0x8f0 net/ipv4/ip_input.c:208 ip_local_deliver_finish+0x23b/0x390 net/ipv4/ip_input.c:234 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_local_deliver+0x1e9/0x520 net/ipv4/ip_input.c:255 dst_input include/net/dst.h:450 [inline] ip_rcv_finish+0x1e1/0x300 net/ipv4/ip_input.c:413 NF_HOOK include/linux/netfilter.h:289 [inline] NF_HOOK include/linux/netfilter.h:283 [inline] ip_rcv+0xe8/0x3f0 net/ipv4/ip_input.c:523 __netif_receive_skb_one_core+0x115/0x1a0 net/core/dev.c:4987 __netif_receive_skb+0x2c/0x1c0 net/core/dev.c:5099 netif_receive_skb_internal+0x117/0x660 net/core/dev.c:5202 napi_frags_finish net/core/dev.c:5769 [inline] napi_gro_frags+0xade/0xd10 net/core/dev.c:5843 tun_get_user+0x2f24/0x3fb0 drivers/net/tun.c:1981 tun_chr_write_iter+0xbd/0x156 drivers/net/tun.c:2027 call_write_iter include/linux/fs.h:1866 [inline] do_iter_readv_writev+0x5e1/0x8e0 fs/read_write.c:681 do_iter_write fs/read_write.c:957 [inline] do_iter_write+0x184/0x610 fs/read_write.c:938 vfs_writev+0x1b3/0x2f0 fs/read_write.c:1002 do_writev+0x15e/0x370 fs/read_write.c:1037 __do_sys_writev fs/read_write.c:1110 [inline] __se_sys_writev fs/read_write.c:1107 [inline] __x64_sys_writev+0x75/0xb0 fs/read_write.c:1107 do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Fixes: 5271953cad31 ("rxrpc: Use the UDP encap_rcv hook") Signed-off-by: Eric Dumazet <[email protected]> Reported-by: syzbot <[email protected]> Acked-by: David Howells <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-24net/mlx5: Introduce new TIR creation core APIAriel Levkovich2-5/+16
Introducing new TIR creation core API which allows caller to receive back from the call the full command outbox. This comes as a preparation for the next patch that will retrieve the TIR ICM address from the command outbox. Signed-off-by: Ariel Levkovich <[email protected]> Reviewed-by: Eli Cohen <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-04-24net/mlx5: Expose TIR ICM address in command outboxAriel Levkovich1-3/+3
Adding the TIR ICM address to the create_tir command outbox through which the device reports the ICM address of the newly created TIR. The TIR address can be used for direct attachment to a steering rule in SW managed steering mode. Signed-off-by: Ariel Levkovich <[email protected]> Reviewed-by: Eli Cohen <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-04-24net/mlx5: Expose SW ICM related device memory capabilitiesAriel Levkovich1-2/+43
Add SW ICM related fields to the device memory capabilities structure and sw ownership capability in flow table properties. The currently supported SW ICM types are steering and header modify and the changes exposes the device memory capabilities for each of these two types. SW ICM memory can be allocated by SW and then be accessed by RDMA operations for direct management of the HW packet handling tables. Signed-off-by: Ariel Levkovich <[email protected]> Reviewed-by: Eli Cohen <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2019-04-24MAINTAINERS: LEDs: Add designated reviewer for LED subsystemDan Murphy1-0/+1
Add a designated reviewer for the LED subsystem as there are already two maintainers assigned. Signed-off-by: Dan Murphy <[email protected]> Acked-by: Pavel Machek <[email protected]> Signed-off-by: Jacek Anaszewski <[email protected]>
2019-04-24net: rds: exchange of 8K and 1M poolZhu Yanjun2-3/+11
Before the commit 490ea5967b0d ("RDS: IB: move FMR code to its own file"), when the dirty_count is greater than 9/10 of max_items of 8K pool, 1M pool is used, Vice versa. After the commit 490ea5967b0d ("RDS: IB: move FMR code to its own file"), the above is removed. When we make the following tests. Server: rds-stress -r 1.1.1.16 -D 1M Client: rds-stress -r 1.1.1.14 -s 1.1.1.16 -D 1M The following will appear. " connecting to 1.1.1.16:4000 negotiated options, tasks will start in 2 seconds Starting up..header from 1.1.1.166:4001 to id 4001 bogus .. tsks tx/s rx/s tx+rx K/s mbi K/s mbo K/s tx us/c rtt us cpu % 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 1 0 0 0.00 0.00 0.00 0.00 0.00 -1.00 ... " So this exchange between 8K and 1M pool is added back. Fixes: commit 490ea5967b0d ("RDS: IB: move FMR code to its own file") Signed-off-by: Zhu Yanjun <[email protected]> Acked-by: Santosh Shilimkar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-24net: sched: flower: refactor reoffload for concurrent accessVlad Buslov1-22/+57
Recent changes that introduced unlocked flower did not properly account for case when reoffload is initiated concurrently with filter updates. To fix the issue, extend flower with 'hw_filters' list that is used to store filters that don't have 'skip_hw' flag set. Filter is added to the list when it is inserted to hardware and only removed from it after being unoffloaded from all drivers that parent block is attached to. This ensures that concurrent reoffload can still access filter that is being deleted and prevents race condition when driver callback can be removed when filter is no longer accessible trough idr, but is still present in hardware. Refactor fl_change() to respect new filter reference counter and to release filter reference with __fl_put() in case of error, instead of directly deallocating filter memory. This allows for concurrent access to filter from fl_reoffload() and protects it with reference counting. Refactor fl_reoffload() to iterate over hw_filters list instead of idr. Implement fl_get_next_hw_filter() helper function that is used to iterate over hw_filters list with reference counting and skips filters that are being concurrently deleted. Fixes: 92149190067d ("net: sched: flower: set unlocked flag for flower proto ops") Signed-off-by: Vlad Buslov <[email protected]> Reviewed-by: Saeed Mahameed <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-24net: mvneta: Switch to using devm_alloc_etherdev_mqsRosen Penev1-8/+4
It allows some of the code to be simplified. Tested on Turris Omnia. Signed-off-by: Rosen Penev <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-24tipc: tipc_udp_recv() cleanup vs rcu verbsEric Dumazet1-6/+3
First thing tipc_udp_recv() does is to use rcu_dereference_sk_user_data(), and this is really hinting we already own rcu_read_lock() from the caller (UDP stack). No need to add another rcu_read_lock()/rcu_read_unlock() pair. Also use rcu_dereference() instead of rcu_dereference_rtnl() in the data path. Signed-off-by: Eric Dumazet <[email protected]> Cc: Jon Maloy <[email protected]> Cc: Ying Xue <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-24net: vrf: Fix operation not supported when set vrf macMiaohe Lin1-0/+2
Vrf device is not able to change mac address now because lack of ndo_set_mac_address. Complete this in case some apps need to do this. Reported-by: Hui Wang <[email protected]> Signed-off-by: Miaohe Lin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-24Bluetooth: hci_core: Don't stop BT if the BD address missing in dtsBalakrishna Godavarthi1-2/+0
When flag HCI_QUIRK_USE_BDADDR_PROPERTY is set, we will read the bluetooth address from dts. If the bluetooth address node is missing from the dts we will enable it controller UNCONFIGURED state. This patch enables the normal flow even if the BD address is missing from the dts tree. Signed-off-by: Balakrishna Godavarthi <[email protected]> Tested-by: Harish Bandi <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2019-04-23ipv6: Use result arg in fib_lookup_arg consistentlyDavid Ahern2-4/+12
arg.result is sometimes used as fib6_result and sometimes used to hold the rt6_info. Add rt6_info to fib6_result and make the use of arg.result consistent through ipv6 rules. The rt6 entry is filled in for lookups returning a dst_entry, but not for direct fib_lookups that just want a fib6_info. Fixes: effda4dd97e8 ("ipv6: Pass fib6_result to fib lookups") Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-23ipv6: fib6_rule_action_alt needs to return -EAGAINDavid Ahern1-1/+3
fib rule actions should return -EAGAIN for the rules to continue to the next one. A recent change overwrote err with the lookup always returning 0 (future change will make it more like IPv4) which means the rules stopped at the first (e.g., local table lookup only). Catch and reset err to -EAGAIN. Fixes: effda4dd97e87 ("ipv6: Pass fib6_result to fib lookups") Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-23net/ncsi: handle overflow when incrementing mac addressTao Ren2-1/+17
Previously BMC's MAC address is calculated by simply adding 1 to the last byte of network controller's MAC address, and it produces incorrect result when network controller's MAC address ends with 0xFF. The problem can be fixed by calling eth_addr_inc() function to increment MAC address; besides, the MAC address is also validated before assigning to BMC. Fixes: cb10c7c0dfd9 ("net/ncsi: Add NCSI Broadcom OEM command") Signed-off-by: Tao Ren <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Acked-by: Samuel Mendoza-Jonas <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-23Merge tag 'drm-fixes-2019-04-24' of git://anongit.freedesktop.org/drm/drmLinus Torvalds4-7/+25
Pull drm regression fixes from Dave Airlie: "We interrupt your regularly scheduled drm fixes for a regression special. The first is for a fix in i915 that had unexpected side effects fallout in the userspace X.org modesetting driver where X would no longer start. I got tired of the nitpicking and issued a large hammer on it. The X.org driver is buggy, but blackscreen regressions are worse. The second was an oversight that myself and Gerd should have noticed better, Gerd is trying to fix this properly, but the regression is too large to leave, even if the original behaviour is bad in some cases, it's clearly bad to break a bunch of working use cases. I'll likely have a regular fixes pull later, but I really wanted to highlight these" * tag 'drm-fixes-2019-04-24' of git://anongit.freedesktop.org/drm/drm: Revert "drm/virtio: drop prime import/export callbacks" Revert "drm/i915/fbdev: Actually configure untiled displays"
2019-04-23mlxsw: spectrum_router: Prevent ipv6 gateway with v4 route via replace and ↵David Ahern1-0/+2
append mlxsw currently does not support v6 gateways with v4 routes. Commit 19a9d136f198 ("ipv4: Flag fib_info with a fib_nh using IPv6 gateway") prevents a route from being added, but nothing stops the replace or append. Add a catch for them too. $ ip ro add 172.16.2.0/24 via 10.99.1.2 $ ip ro replace 172.16.2.0/24 via inet6 fe80::202:ff:fe00:b dev swp1s0 Error: mlxsw_spectrum: IPv6 gateway with IPv4 route is not supported. $ ip ro append 172.16.2.0/24 via inet6 fe80::202:ff:fe00:b dev swp1s0 Error: mlxsw_spectrum: IPv6 gateway with IPv4 route is not supported. Signed-off-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-23Merge branch 'Taprio-qdisc-fixes'David S. Miller1-28/+28
Andre Guedes says: ==================== Taprio qdisc fixes I'm re-sending this series, now with the "net-next" prefix in the subject. The only change from the previous version is in patch 3. As suggested by Cong Wang, it removes the !entry check within should_restart_cycle() since it is already checked by the caller. As a side effect, that function becomes a dummy wrapper on list_is_last() so we simply remove it and call list_is_last() instead. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-04-23net: sched: taprio: Fix taprio_dequeue()Andre Guedes1-2/+2
In case we don't have 'guard' or 'budget' to transmit the skb, we should continue traversing the qdisc list since the remaining guard/budget might be enough to transmit a skb from other children qdiscs. Fixes: 5a781ccbd19e (“tc: Add support for configuring the taprio scheduler”) Signed-off-by: Andre Guedes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-23net: sched: taprio: Fix taprio_peek()Andre Guedes1-2/+2
While traversing taprio's children qdisc list, if the gate is closed for a given traffic class, we should continue traversing the list since the remaining qdiscs may have skb ready for transmission. This patch also takes this opportunity and changes the function to use the TAPRIO_ALL_GATES_OPEN macro instead of the magic number '-1'. Fixes: 5a781ccbd19e (“tc: Add support for configuring the taprio scheduler”) Signed-off-by: Andre Guedes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-23net: sched: taprio: Remove should_restart_cycle()Andre Guedes1-9/+1
The 'entry' argument from should_restart_cycle() cannot be NULL since it is already checked by the caller so the WARN_ON() within should_ restart_cycle() could be removed. By doing that, that function becomes a dummy wrapper on list_is_last() so this patch simply gets rid of it and call list_is_last() within advance_sched() instead. Signed-off-by: Andre Guedes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-23net: sched: taprio: Refactor taprio_get_start_time()Andre Guedes1-14/+23
This patch does a code refactoring to taprio_get_start_time() function to improve readability and report error properly. If 'base' time is later than 'now', the start time is equal to 'base' and taprio_get_start_time() is done. That's the natural case so we move that code to the beginning of the function. Also, if 'cycle' calculation is zero, something went really wrong with taprio and we should log that internal error properly. Signed-off-by: Andre Guedes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-04-23net: sched: taprio: Remove pointless variable assigmentAndre Guedes1-1/+0
This patch removes a pointless variable assigment in taprio_change(). The 'err' variable is not used from this assignment to the next one so this patch removes it. Signed-off-by: Andre Guedes <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.