| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Test whether we can add file descriptors in response to notifications.
This injects the file descriptors via notifications, and then uses kcmp
to determine whether or not it has been successful.
It also includes some basic sanity checking for arguments.
Signed-off-by: Sargun Dhillon <[email protected]>
Cc: Al Viro <[email protected]>
Cc: Chris Palmer <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Robert Sesek <[email protected]>
Cc: Tycho Andersen <[email protected]>
Cc: Matt Denton <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Co-developed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
The current SECCOMP_RET_USER_NOTIF API allows for syscall supervision over
an fd. It is often used in settings where a supervising task emulates
syscalls on behalf of a supervised task in userspace, either to further
restrict the supervisee's syscall abilities or to circumvent kernel
enforced restrictions the supervisor deems safe to lift (e.g. actually
performing a mount(2) for an unprivileged container).
While SECCOMP_RET_USER_NOTIF allows for the interception of any syscall,
only a certain subset of syscalls could be correctly emulated. Over the
last few development cycles, the set of syscalls which can't be emulated
has been reduced due to the addition of pidfd_getfd(2). With this we are
now able to, for example, intercept syscalls that require the supervisor
to operate on file descriptors of the supervisee such as connect(2).
However, syscalls that cause new file descriptors to be installed can not
currently be correctly emulated since there is no way for the supervisor
to inject file descriptors into the supervisee. This patch adds a
new addfd ioctl to remove this restriction by allowing the supervisor to
install file descriptors into the intercepted task. By implementing this
feature via seccomp the supervisor effectively instructs the supervisee
to install a set of file descriptors into its own file descriptor table
during the intercepted syscall. This way it is possible to intercept
syscalls such as open() or accept(), and install (or replace, like
dup2(2)) the supervisor's resulting fd into the supervisee. One
replacement use-case would be to redirect the stdout and stderr of a
supervisee into log file descriptors opened by the supervisor.
The ioctl handling is based on the discussions[1] of how Extensible
Arguments should interact with ioctls. Instead of building size into
the addfd structure, make it a function of the ioctl command (which
is how sizes are normally passed to ioctls). To support forward and
backward compatibility, just mask out the direction and size, and match
everything. The size (and any future direction) checks are done along
with copy_struct_from_user() logic.
As a note, the seccomp_notif_addfd structure is laid out based on 8-byte
alignment without requiring packing as there have been packing issues
with uapi highlighted before[2][3]. Although we could overload the
newfd field and use -1 to indicate that it is not to be used, doing
so requires changing the size of the fd field, and introduces struct
packing complexity.
[1]: https://lore.kernel.org/lkml/[email protected]/
[2]: https://lore.kernel.org/lkml/[email protected]/
[3]: https://lore.kernel.org/lkml/[email protected]
Cc: Christoph Hellwig <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Tycho Andersen <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Robert Sesek <[email protected]>
Cc: Chris Palmer <[email protected]>
Cc: Al Viro <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Suggested-by: Matt Denton <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Sargun Dhillon <[email protected]>
Reviewed-by: Will Drewry <[email protected]>
Co-developed-by: Kees Cook <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
Expand __receive_fd() with support for replace_fd() for the coming seccomp
"addfd" ioctl(). Add new wrapper receive_fd_replace() for the new behavior
and update existing wrappers to retain old behavior.
Thanks to Colin Ian King <[email protected]> for pointing out an
uninitialized variable exposure in an earlier version of this patch.
Cc: Alexander Viro <[email protected]>
Cc: Dmitry Kadashev <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: [email protected]
Reviewed-by: Sargun Dhillon <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
Replace the open-coded version of receive_fd() with a call to the
new helper.
Thanks to Vamshi K Sthambamkadi <[email protected]> for
catching a missed fput() in an earlier version of this patch.
Cc: Christoph Hellwig <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Sargun Dhillon <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
For both pidfd and seccomp, the __user pointer is not used. Update
__receive_fd() to make writing to ufd optional via a NULL check. However,
for the receive_fd_user() wrapper, ufd is NULL checked so an -EFAULT
can be returned to avoid changing the SCM_RIGHTS interface behavior. Add
new wrapper receive_fd() for pidfd and seccomp that does not use the ufd
argument. For the new helper, the allocated fd needs to be returned on
success. Update the existing callers to handle it.
Cc: Alexander Viro <[email protected]>
Cc: [email protected]
Reviewed-by: Sargun Dhillon <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
In preparation for users of the "install a received file" logic outside
of net/ (pidfd and seccomp), relocate and rename __scm_install_fd() from
net/core/scm.c to __receive_fd() in fs/file.c, and provide a wrapper
named receive_fd_user(), as future patches will change the interface
to __receive_fd().
Additionally add a comment to fd_install() as a counterpoint to how
__receive_fd() interacts with fput().
Cc: Alexander Viro <[email protected]>
Cc: "David S. Miller" <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: Dmitry Kadashev <[email protected]>
Cc: Jens Axboe <[email protected]>
Cc: Arnd Bergmann <[email protected]>
Cc: Sargun Dhillon <[email protected]>
Cc: Ido Schimmel <[email protected]>
Cc: Ioana Ciornei <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reviewed-by: Sargun Dhillon <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
Duplicate the cleanups from commit 2618d530dd8b ("net/scm: cleanup
scm_detach_fds") into the compat code.
Replace open-coded __receive_sock() with a call to the helper.
Move the check added in commit 1f466e1f15cf ("net: cleanly handle kernel
vs user buffers for ->msg_control") to before the compat call, even
though it should be impossible for an in-kernel call to also be compat.
Correct the int "flags" argument to unsigned int to match fd_install()
and similar APIs.
Regularize any remaining differences, including a whitespace issue,
a checkpatch warning, and add the check from commit 6900317f5eff ("net,
scm: fix PaX detected msg_controllen overflow in scm_detach_fds") which
fixed an overflow unique to 64-bit. To avoid confusion when comparing
the compat handler to the native handler, just include the same check
in the compat handler.
Cc: Christoph Hellwig <[email protected]>
Cc: Sargun Dhillon <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: [email protected]
Cc: [email protected]
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
The sock counting (sock_update_netprioidx() and sock_update_classid())
was missing from pidfd's implementation of received fd installation. Add
a call to the new __receive_sock() helper.
Cc: Christian Brauner <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: Sargun Dhillon <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Fixes: 8649c322f75c ("pid: Implement pidfd_getfd syscall")
Signed-off-by: Kees Cook <[email protected]>
|
|
Add missed sock updates to compat path via a new helper, which will be
used more in coming patches. (The net/core/scm.c code is left as-is here
to assist with -stable backports for the compat path.)
Cc: Christoph Hellwig <[email protected]>
Cc: Sargun Dhillon <[email protected]>
Cc: Jakub Kicinski <[email protected]>
Cc: [email protected]
Fixes: 48a87cc26c13 ("net: netprio: fd passed in SCM_RIGHTS datagram not set correctly")
Fixes: d84295067fc7 ("net: net_cls: fd passed in SCM_RIGHTS datagram not set correctly")
Acked-by: Christian Brauner <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
There should be no difference between -1 and other negative syscalls
while tracing.
Cc: Keno Fischer <[email protected]>
Tested-by: Will Deacon <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
Now that the selftest harness has variants, use them to eliminate a
bunch of copy/paste duplication.
Reviewed-by: Jakub Kicinski <[email protected]>
Tested-by: Will Deacon <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
The FIXTURE*() macro kern-doc examples had the wrong names for the C code
examples associated with them. Fix those and clarify that FIXTURE_DATA()
usage should be avoided.
Cc: Shuah Khan <[email protected]>
Fixes: 74bc7c97fa88 ("kselftest: add fixture variants")
Acked-by: Jakub Kicinski <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
The terminator for the mode 1 syscalls list was a 0, but that could be
a valid syscall number (e.g. x86_64 __NR_read). By luck, __NR_read was
listed first and the loop construct would not test it, so there was no
bug. However, this is fragile. Replace the terminator with -1 instead,
and make the variable name for mode 1 syscall lists more descriptive.
Cc: Andy Lutomirski <[email protected]>
Cc: Will Drewry <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
When SECCOMP_IOCTL_NOTIF_ID_VALID was first introduced it had the wrong
direction flag set. While this isn't a big deal as nothing currently
enforces these bits in the kernel, it should be defined correctly. Fix
the define and provide support for the old command until it is no longer
needed for backward compatibility.
Fixes: 6a21cc50f0c7 ("seccomp: add a return code to trap to userspace")
Signed-off-by: Kees Cook <[email protected]>
|
|
The user_trap_syscall() helper creates a filter with
SECCOMP_RET_USER_NOTIF. To avoid confusion with SECCOMP_RET_TRAP, rename
the helper to user_notif_syscall().
Cc: Andy Lutomirski <[email protected]>
Cc: Will Drewry <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
The seccomp tests are a bit noisy without CONFIG_CHECKPOINT_RESTORE (due
to missing the kcmp() syscall). The seccomp tests are more accurate with
kcmp(), but it's not strictly required. Refactor the tests to use
alternatives (comparing fd numbers), and provide a central test for
kcmp() so there is a single SKIP instead of many. Continue to produce
warnings for the other tests, though.
Additionally adds some more bad flag EINVAL tests to the addfd selftest.
Cc: Andy Lutomirski <[email protected]>
Cc: Will Drewry <[email protected]>
Cc: Shuah Khan <[email protected]>
Cc: Alexei Starovoitov <[email protected]>
Cc: Daniel Borkmann <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Yonghong Song <[email protected]>
Cc: Andrii Nakryiko <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
Avoid open-coding "seccomp: " prefixes for pr_*() calls.
Signed-off-by: Kees Cook <[email protected]>
|
|
The seccomp benchmark calibration loop did not need to take so long.
Instead, use a simple 1 second timeout and multiply up to target. It
does not need to be accurate.
Signed-off-by: Kees Cook <[email protected]>
|
|
As seccomp_benchmark tries to calibrate how many samples will take more
than 5 seconds to execute, it may end up picking up a number of samples
that take 10 (but up to 12) seconds. As the calibration will take double
that time, it takes around 20 seconds. Then, it executes the whole thing
again, and then once more, with some added overhead. So, the thing might
take more than 40 seconds, which is too close to the 45s timeout.
That is very dependent on the system where it's executed, so may not be
observed always, but it has been observed on x86 VMs. Using a 90s timeout
seems safe enough.
Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
It's useful to see how much (at a minimum) each filter adds to the
syscall overhead. Add additional calculations.
Signed-off-by: Kees Cook <[email protected]>
|
|
This verifies we're correctly notified when a seccomp filter becomes
unused when a notifier is in use.
Signed-off-by: Christian Brauner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
We've been making heavy use of the seccomp notifier to intercept and
handle certain syscalls for containers. This patch allows a syscall
supervisor listening on a given notifier to be notified when a seccomp
filter has become unused.
A container is often managed by a singleton supervisor process the
so-called "monitor". This monitor process has an event loop which has
various event handlers registered. If the user specified a seccomp
profile that included a notifier for various syscalls then we also
register a seccomp notify even handler. For any container using a
separate pid namespace the lifecycle of the seccomp notifier is bound to
the init process of the pid namespace, i.e. when the init process exits
the filter must be unused.
If a new process attaches to a container we force it to assume a seccomp
profile. This can either be the same seccomp profile as the container
was started with or a modified one. If the attaching process makes use
of the seccomp notifier we will register a new seccomp notifier handler
in the monitor's event loop. However, when the attaching process exits
we can't simply delete the handler since other child processes could've
been created (daemons spawned etc.) that have inherited the seccomp
filter and so we need to keep the seccomp notifier fd alive in the event
loop. But this is problematic since we don't get a notification when the
seccomp filter has become unused and so we currently never remove the
seccomp notifier fd from the event loop and just keep accumulating fds
in the event loop. We've had this issue for a while but it has recently
become more pressing as more and larger users make use of this.
To fix this, we introduce a new "users" reference counter that tracks any
tasks and dependent filters making use of a filter. When a notifier is
registered waiting tasks will be notified that the filter is now empty
by receiving a (E)POLLHUP event.
The concept in this patch introduces is the same as for signal_struct,
i.e. reference counting for life-cycle management is decoupled from
reference counting taks using the object. There's probably some trickery
possible but the second counter is just the correct way of doing this
IMHO and has precedence.
Cc: Tycho Andersen <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Matt Denton <[email protected]>
Cc: Sargun Dhillon <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Chris Palmer <[email protected]>
Cc: Aleksa Sarai <[email protected]>
Cc: Robert Sesek <[email protected]>
Cc: Jeffrey Vander Stoep <[email protected]>
Cc: Linux Containers <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
Lift the wait_queue from struct notification into struct seccomp_filter.
This is cleaner overall and lets us avoid having to take the notifier
mutex in the future for EPOLLHUP notifications since we need to neither
read nor modify the notifier specific aspects of the seccomp filter. In
the exit path I'd very much like to avoid having to take the notifier mutex
for each filter in the task's filter hierarchy.
Cc: Tycho Andersen <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Matt Denton <[email protected]>
Cc: Sargun Dhillon <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Chris Palmer <[email protected]>
Cc: Aleksa Sarai <[email protected]>
Cc: Robert Sesek <[email protected]>
Cc: Jeffrey Vander Stoep <[email protected]>
Cc: Linux Containers <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
The seccomp filter used to be released in free_task() which is called
asynchronously via call_rcu() and assorted mechanisms. Since we need
to inform tasks waiting on the seccomp notifier when a filter goes empty
we will notify them as soon as a task has been marked fully dead in
release_task(). To not split seccomp cleanup into two parts, move
filter release out of free_task() and into release_task() after we've
unhashed struct task from struct pid, exited signals, and unlinked it
from the threadgroups' thread list. We'll put the empty filter
notification infrastructure into it in a follow up patch.
This also renames put_seccomp_filter() to seccomp_filter_release() which
is a more descriptive name of what we're doing here especially once
we've added the empty filter notification mechanism in there.
We're also NULL-ing the task's filter tree entrypoint which seems
cleaner than leaving a dangling pointer in there. Note that this shouldn't
need any memory barriers since we're calling this when the task is in
release_task() which means it's EXIT_DEAD. So it can't modify its seccomp
filters anymore. You can also see this from the point where we're calling
seccomp_filter_release(). It's after __exit_signal() and at this point,
tsk->sighand will already have been NULLed which is required for
thread-sync and filter installation alike.
Cc: Tycho Andersen <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Matt Denton <[email protected]>
Cc: Sargun Dhillon <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Chris Palmer <[email protected]>
Cc: Aleksa Sarai <[email protected]>
Cc: Robert Sesek <[email protected]>
Cc: Jeffrey Vander Stoep <[email protected]>
Cc: Linux Containers <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
Naming the lifetime counter of a seccomp filter "usage" suggests a
little too strongly that its about tasks that are using this filter
while it also tracks other references such as the user notifier or
ptrace. This also updates the documentation to note this fact.
We'll be introducing an actual usage counter in a follow-up patch.
Cc: Tycho Andersen <[email protected]>
Cc: Kees Cook <[email protected]>
Cc: Matt Denton <[email protected]>
Cc: Sargun Dhillon <[email protected]>
Cc: Jann Horn <[email protected]>
Cc: Chris Palmer <[email protected]>
Cc: Aleksa Sarai <[email protected]>
Cc: Robert Sesek <[email protected]>
Cc: Jeffrey Vander Stoep <[email protected]>
Cc: Linux Containers <[email protected]>
Signed-off-by: Christian Brauner <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
This adds a helper which can iterate through a seccomp_filter to
find a notification matching an ID. It removes several replicated
chunks of code.
Signed-off-by: Sargun Dhillon <[email protected]>
Acked-by: Christian Brauner <[email protected]>
Reviewed-by: Tycho Andersen <[email protected]>
Cc: Matt Denton <[email protected]>
Cc: Kees Cook <[email protected]>,
Cc: Jann Horn <[email protected]>,
Cc: Robert Sesek <[email protected]>,
Cc: Chris Palmer <[email protected]>
Cc: Christian Brauner <[email protected]>
Cc: Tycho Andersen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Kees Cook <[email protected]>
|
|
A common question asked when debugging seccomp filters is "how many
filters are attached to your process?" Provide a way to easily answer
this question through /proc/$pid/status with a "Seccomp_filters" line.
Signed-off-by: Kees Cook <[email protected]>
|
|
The TSYNC ESRCH flag test will fail for regular users because NNP was
not set yet. Add NNP setting.
Fixes: 51891498f2da ("seccomp: allow TSYNC and USER_NOTIF together")
Cc: [email protected]
Reviewed-by: Tycho Andersen <[email protected]>
Signed-off-by: Kees Cook <[email protected]>
|
|
Running the seccomp tests as a regular user shouldn't just fail tests
that require CAP_SYS_ADMIN (for getting a PID namespace). Instead,
detect those cases and SKIP them. Additionally, gracefully SKIP missing
CONFIG_USER_NS (and add to "config" since we'd prefer to actually test
this case).
Signed-off-by: Kees Cook <[email protected]>
|
|
The kselftests will be renaming XFAIL to SKIP in the test harness, and
to avoid painful conflicts, rename XFAIL to SKIP now in a future-proofed
way.
Signed-off-by: Kees Cook <[email protected]>
|
|
|
|
git://github.com/micah-morton/linux
Pull SafeSetID update from Micah Morton:
"Add additional LSM hooks for SafeSetID
SafeSetID is capable of making allow/deny decisions for set*uid calls
on a system, and we want to add similar functionality for set*gid
calls.
The work to do that is not yet complete, so probably won't make it in
for v5.8, but we are looking to get this simple patch in for v5.8
since we have it ready.
We are planning on the rest of the work for extending the SafeSetID
LSM being merged during the v5.9 merge window"
* tag 'LSM-add-setgid-hook-5.8-author-fix' of git://github.com/micah-morton/linux:
security: Add LSM hooks to set*gid syscalls
|
|
The SafeSetID LSM uses the security_task_fix_setuid hook to filter
set*uid() syscalls according to its configured security policy. In
preparation for adding analagous support in the LSM for set*gid()
syscalls, we add the requisite hook here. Tested by putting print
statements in the security_task_fix_setgid hook and seeing them get hit
during kernel boot.
Signed-off-by: Thomas Cedeno <[email protected]>
Signed-off-by: Micah Morton <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs updates from David Sterba:
"This reverts the direct io port to iomap infrastructure of btrfs
merged in the first pull request. We found problems in invalidate page
that don't seem to be fixable as regressions or without changing iomap
code that would not affect other filesystems.
There are four reverts in total, but three of them are followup
cleanups needed to revert a43a67a2d715 cleanly. The result is the
buffer head based implementation of direct io.
Reverts are not great, but under current circumstances I don't see
better options"
* tag 'for-5.8-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
Revert "btrfs: switch to iomap_dio_rw() for dio"
Revert "fs: remove dio_end_io()"
Revert "btrfs: remove BTRFS_INODE_READDIO_NEED_LOCK"
Revert "btrfs: split btrfs_direct_IO to read and write part"
|
|
Pull networking fixes from David Miller:
1) Fix cfg80211 deadlock, from Johannes Berg.
2) RXRPC fails to send norigications, from David Howells.
3) MPTCP RM_ADDR parsing has an off by one pointer error, fix from
Geliang Tang.
4) Fix crash when using MSG_PEEK with sockmap, from Anny Hu.
5) The ucc_geth driver needs __netdev_watchdog_up exported, from
Valentin Longchamp.
6) Fix hashtable memory leak in dccp, from Wang Hai.
7) Fix how nexthops are marked as FDB nexthops, from David Ahern.
8) Fix mptcp races between shutdown and recvmsg, from Paolo Abeni.
9) Fix crashes in tipc_disc_rcv(), from Tuong Lien.
10) Fix link speed reporting in iavf driver, from Brett Creeley.
11) When a channel is used for XSK and then reused again later for XSK,
we forget to clear out the relevant data structures in mlx5 which
causes all kinds of problems. Fix from Maxim Mikityanskiy.
12) Fix memory leak in genetlink, from Cong Wang.
13) Disallow sockmap attachments to UDP sockets, it simply won't work.
From Lorenz Bauer.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (83 commits)
net: ethernet: ti: ale: fix allmulti for nu type ale
net: ethernet: ti: am65-cpsw-nuss: fix ale parameters init
net: atm: Remove the error message according to the atomic context
bpf: Undo internal BPF_PROBE_MEM in BPF insns dump
libbpf: Support pre-initializing .bss global variables
tools/bpftool: Fix skeleton codegen
bpf: Fix memlock accounting for sock_hash
bpf: sockmap: Don't attach programs to UDP sockets
bpf: tcp: Recv() should return 0 when the peer socket is closed
ibmvnic: Flush existing work items before device removal
genetlink: clean up family attributes allocations
net: ipa: header pad field only valid for AP->modem endpoint
net: ipa: program upper nibbles of sequencer type
net: ipa: fix modem LAN RX endpoint id
net: ipa: program metadata mask differently
ionic: add pcie_print_link_status
rxrpc: Fix race between incoming ACK parser and retransmitter
net/mlx5: E-Switch, Fix some error pointer dereferences
net/mlx5: Don't fail driver on failure to create debugfs
net/mlx5e: CT: Fix ipv6 nat header rewrite actions
...
|
|
This reverts commit a43a67a2d715540c1368b9501a22b0373b5874c0.
This patch reverts the main part of switching direct io implementation
to iomap infrastructure. There's a problem in invalidate page that
couldn't be solved as regression in this development cycle.
The problem occurs when buffered and direct io are mixed, and the ranges
overlap. Although this is not recommended, filesystems implement
measures or fallbacks to make it somehow work. In this case, fallback to
buffered IO would be an option for btrfs (this already happens when
direct io is done on compressed data), but the change would be needed in
the iomap code, bringing new semantics to other filesystems.
Another problem arises when again the buffered and direct ios are mixed,
invalidation fails, then -EIO is set on the mapping and fsync will fail,
though there's no real error.
There have been discussions how to fix that, but revert seems to be the
least intrusive option.
Link: https://lore.kernel.org/linux-btrfs/20200528192103.xm45qoxqmkw7i5yl@fiona/
Signed-off-by: David Sterba <[email protected]>
|
|
On AM65xx MCU CPSW2G NUSS and 66AK2E/L NUSS allmulti setting does not allow
unregistered mcast packets to pass.
This happens, because ALE VLAN entries on these SoCs do not contain port
masks for reg/unreg mcast packets, but instead store indexes of
ALE_VLAN_MASK_MUXx_REG registers which intended for store port masks for
reg/unreg mcast packets.
This path was missed by commit 9d1f6447274f ("net: ethernet: ti: ale: fix
seeing unreg mcast packets with promisc and allmulti disabled").
Hence, fix it by taking into account ALE type in cpsw_ale_set_allmulti().
Fixes: 9d1f6447274f ("net: ethernet: ti: ale: fix seeing unreg mcast packets with promisc and allmulti disabled")
Signed-off-by: Grygorii Strashko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The ALE parameters structure is created on stack, so it has to be reset
before passing to cpsw_ale_create() to avoid garbage values.
Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Grygorii Strashko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2020-06-12
The following pull-request contains BPF updates for your *net* tree.
We've added 26 non-merge commits during the last 10 day(s) which contain
a total of 27 files changed, 348 insertions(+), 93 deletions(-).
The main changes are:
1) sock_hash accounting fix, from Andrey.
2) libbpf fix and probe_mem sanitizing, from Andrii.
3) sock_hash fixes, from Jakub.
4) devmap_val fix, from Jesper.
5) load_bytes_relative fix, from YiFei.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Looking into the context (atomic!) and the error message should be dropped.
Signed-off-by: Liao Pingfang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Pull more cifs updates from Steve French:
"12 cifs/smb3 fixes, 2 for stable.
- add support for idsfromsid on create and chgrp/chown allowing
ability to save owner information more naturally for some workloads
- improve query info (getattr) when SMB3.1.1 posix extensions are
negotiated by using new query info level"
* tag '5.8-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: Add debug message for new file creation with idsfromsid mount option
cifs: fix chown and chgrp when idsfromsid mount option enabled
smb3: allow uid and gid owners to be set on create with idsfromsid mount option
smb311: Add tracepoints for new compound posix query info
smb311: add support for using info level for posix extensions query
smb311: Add support for lookup with posix extensions query info
smb311: Add support for SMB311 query info (non-compounded)
SMB311: Add support for query info using posix extensions (level 100)
smb3: add indatalen that can be a non-zero value to calculation of credit charge in smb2 ioctl
smb3: fix typo in mount options displayed in /proc/mounts
cifs: Add get_security_type_str function to return sec type.
smb3: extend fscache mount volume coherency check
|
|
Let's keep "git status" happy and quiet.
Fixes: 9762dc1432e1 ("samples: add binderfs sample program
Fixes: fca5e94921d5 ("samples: binderfs: really compile this sample and fix build issues")
Signed-off-by: Linus Torvalds <[email protected]>
|
|
I'm not convinced the script makes useful automaed help lines anyway,
but since we're trying to deprecate the use of "---help---" in Kconfig
files, let's fix the doc example code too.
See commit a7f7f6248d97 ("treewide: replace '---help---' in Kconfig
files with 'help'")
Cc: Masahiro Yamada <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- fix build rules in binderfs sample
- fix build errors when Kbuild recurses to the top Makefile
- covert '---help---' in Kconfig to 'help'
* tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
treewide: replace '---help---' in Kconfig files with 'help'
kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables
samples: binderfs: really compile this sample and fix build issues
|
|
Pull more SCSI updates from James Bottomley:
"This is the set of changes collected since just before the merge
window opened. It's mostly minor fixes in drivers.
The one non-driver set is the three optical disk (sr) changes where
two are error path fixes and one is a helper conversion.
The big driver change is the hpsa compat_alloc_userspace rework by Al
so he can kill the remaining user. This has been tested and acked by
the maintainer"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (21 commits)
scsi: acornscsi: Fix an error handling path in acornscsi_probe()
scsi: storvsc: Remove memset before memory freeing in storvsc_suspend()
scsi: cxlflash: Remove an unnecessary NULL check
scsi: ibmvscsi: Don't send host info in adapter info MAD after LPM
scsi: sr: Fix sr_probe() missing deallocate of device minor
scsi: sr: Fix sr_probe() missing mutex_destroy
scsi: st: Convert convert get_user_pages() --> pin_user_pages()
scsi: target: Rename target_setup_cmd_from_cdb() to target_cmd_parse_cdb()
scsi: target: Fix NULL pointer dereference
scsi: target: Initialize LUN in transport_init_se_cmd()
scsi: target: Factor out a new helper, target_cmd_init_cdb()
scsi: hpsa: hpsa_ioctl(): Tidy up a bit
scsi: hpsa: Get rid of compat_alloc_user_space()
scsi: hpsa: Don't bother with vmalloc for BIG_IOCTL_Command_struct
scsi: hpsa: Lift {BIG_,}IOCTL_Command_struct copy{in,out} into hpsa_ioctl()
scsi: ufs: Remove redundant urgent_bkop_lvl initialization
scsi: ufs: Don't update urgent bkops level when toggling auto bkops
scsi: qedf: Remove redundant initialization of variable rc
scsi: mpt3sas: Fix memset() in non-RDPQ mode
scsi: iscsi: Fix reference count leak in iscsi_boot_create_kobj
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c updates from Wolfram Sang:
"I2C has quite some patches for you this time. I hope it is the move to
per-driver-maintainers which is now showing results. We will see.
The big news is two new drivers (Nuvoton NPCM and Qualcomm CCI),
larger refactoring of the Designware, Tegra, and PXA drivers, the
Cadence driver supports being a slave now, and there is support to
instanciate SPD eeproms for well-known cases (which will be
user-visible because the i801 driver supports it), and some
devm_platform_ioremap_resource() conversions which blow up the
diffstat.
Note that I applied the Nuvoton driver quite late, so some minor fixup
patches arrived during the merge window. I chose to apply them right
away because they were trivial"
* 'i2c/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (109 commits)
i2c: Drop stray comma in MODULE_AUTHOR statements
i2c: npcm7xx: npcm_i2caddr[] can be static
MAINTAINERS: npcm7xx: Add maintainer for Nuvoton NPCM BMC
i2c: npcm7xx: Fix a couple of error codes in probe
i2c: icy: Fix build with CONFIG_AMIGA_PCMCIA=n
i2c: npcm7xx: Remove unnecessary parentheses
i2c: npcm7xx: Add support for slave mode for Nuvoton
i2c: npcm7xx: Add Nuvoton NPCM I2C controller driver
dt-bindings: i2c: npcm7xx: add NPCM I2C controller
i2c: pxa: don't error out if there's no pinctrl
i2c: add 'single-master' property to generic bindings
i2c: designware: Add Baikal-T1 System I2C support
i2c: designware: Move reg-space remapping into a dedicated function
i2c: designware: Retrieve quirk flags as early as possible
i2c: designware: Convert driver to using regmap API
i2c: designware: Discard Cherry Trail model flag
i2c: designware: Add Baytrail sem config DW I2C platform dependency
i2c: designware: slave: Set DW I2C core module dependency
i2c: designware: Use `-y` to build multi-object modules
dt-bindings: i2c: dw: Add Baikal-T1 SoC I2C controller
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull more media updates from Mauro Carvalho Chehab:
- a set of atomisp patches. They remove several abstraction layers, and
fixes clang and gcc warnings (that were hidden via some macros that
were disabling 4 or 5 types of warnings there). There are also some
important fixes and sensor auto-detection on newer BIOSes via ACPI
_DCM tables.
- some fixes
* tag 'media/v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (95 commits)
media: rkvdec: Fix H264 scaling list order
media: v4l2-ctrls: Unset correct HEVC loop filter flag
media: videobuf2-dma-contig: fix bad kfree in vb2_dma_contig_clear_max_seg_size
media: v4l2-subdev.rst: correct information about v4l2 events
media: s5p-mfc: Properly handle dma_parms for the allocated devices
media: medium: cec: Make MEDIA_CEC_SUPPORT default to n if !MEDIA_SUPPORT
media: cedrus: Implement runtime PM
media: cedrus: Program output format during each run
media: atomisp: improve ACPI/DMI detection logs
media: Revert "media: atomisp: add Asus Transform T101HA ACPI vars"
media: Revert "media: atomisp: Add some ACPI detection info"
media: atomisp: improve sensor detection code to use _DSM table
media: atomisp: get rid of an iomem abstraction layer
media: atomisp: get rid of a string_support.h abstraction layer
media: atomisp: use strscpy() instead of less secure variants
media: atomisp: set DFS to MAX if sensor doesn't report fps
media: atomisp: use different dfs failed messages
media: atomisp: change the detection of ISP2401 at runtime
media: atomisp: use macros from intel-family.h
media: atomisp: don't set hpll_freq twice with different values
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Dan Williams:
"Small collection of cleanups to rework usage of ->queuedata and the
GUID api"
* tag 'libnvdimm-for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/pmem: stop using ->queuedata
nvdimm/btt: stop using ->queuedata
nvdimm/blk: stop using ->queuedata
libnvdimm: Replace guid_copy() with import_guid() where it makes sense
|
|
Let's keep "git status" happy and quiet.
Fixes: f5b5a164f9a1 ("Add sample notification program")
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull iomap fix from Darrick Wong:
"A single iomap bug fix for a variable type mistake on 32-bit
architectures, fixing an integer overflow problem in the unshare
actor"
* tag 'iomap-5.8-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
iomap: Fix unsharing of an extent >2GB on a 32-bit machine
|