aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-04-14ice: xsk: check if Rx ring was filled up to the endMaciej Fijalkowski1-1/+6
__ice_alloc_rx_bufs_zc() checks if a number of the descriptors to be allocated would cause the ring wrap. In that case, driver will issue two calls to xsk_buff_alloc_batch() - one that will fill the ring up to the end and the second one that will start with filling descriptors from the beginning of the ring. ice_fill_rx_descs() is a wrapper for taking care of what xsk_buff_alloc_batch() gave back to the driver. It works in a best effort approach, so for example when driver asks for 64 buffers, ice_fill_rx_descs() could assign only 32. Such case needs to be checked when ring is being filled up to the end, because in that situation ntu might not reached the end of the ring. Fix the ring wrap by checking if nb_buffs_extra has the expected value. If not, bump ntu and go directly to tail update. Fixes: 3876ff525de7 ("ice: xsk: Handle SW XDP ring wrap and bump tail more often") Signed-off-by: Magnus Karlsson <[email protected]> Signed-off-by: Maciej Fijalkowski <[email protected]> Tested-by: Shwetha Nagaraju <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-14EDAC/synopsys: Read the error count from the correct registerShubhrajyoti Datta1-5/+11
Currently, the error count is read wrongly from the status register. Read the count from the proper error count register (ERRCNT). [ bp: Massage. ] Fixes: b500b4a029d5 ("EDAC, synopsys: Add ECC support for ZynqMP DDR controller") Signed-off-by: Shubhrajyoti Datta <[email protected]> Signed-off-by: Borislav Petkov <[email protected]> Acked-by: Michal Simek <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-14perf bench: Fix numa bench to fix usage of affinity for machines with #CPUs > 1KAthira Rajeev1-33/+95
The 'perf bench numa' testcase fails on systems with more than 1K CPUs. Testcase: perf bench numa mem -p 1 -t 3 -P 512 -s 100 -zZ0qcm --thp 1 Snippet of code: <<>> perf: bench/numa.c:302: bind_to_node: Assertion `!(ret)' failed. Aborted (core dumped) <<>> bind_to_node() uses "sched_getaffinity" to save the original cpumask and this call is returning EINVAL ((invalid argument). This happens because the default mask size in glibc is 1024. To overcome this 1024 CPUs mask size limitation of cpu_set_t, change the mask size using the CPU_*_S macros ie, use CPU_ALLOC to allocate cpumask, CPU_ALLOC_SIZE for size. Apart from fixing this for "orig_mask", apply same logic to "mask" as well which is used to setaffinity so that mask size is large enough to represent number of possible CPU's in the system. sched_getaffinity is used in one more place in perf numa bench. It is in "bind_to_cpu" function. Apply the same logic there also. Though currently no failure is reported from there, it is ideal to change getaffinity to work with such system configurations having CPU's more than default mask size supported by glibc. Also fix "sched_setaffinity" to use mask size which is large enough to represent number of possible CPU's in the system. Fixed all places where "bind_cpumask" which is part of "struct thread_data" is used such that bind_cpumask works in all configuration. Reported-by: Disha Goel <[email protected]> Signed-off-by: Athira Jajeev <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Nageswara R Sastry <[email protected]> Cc: Srikar Dronamraju <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-14perf bench: Fix numa testcase to check if CPU used to bind task is onlineAthira Rajeev3-2/+58
Perf numa bench test fails with error: Testcase: ./perf bench numa mem -p 2 -t 1 -P 1024 -C 0,8 -M 1,0 -s 20 -zZq --thp 1 --no-data_rand_walk Failure snippet: <<>> Running 'numa/mem' benchmark: # Running main, "perf bench numa numa-mem -p 2 -t 1 -P 1024 -C 0,8 -M 1,0 -s 20 -zZq --thp 1 --no-data_rand_walk" perf: bench/numa.c:333: bind_to_cpumask: Assertion `!(ret)' failed. <<>> The Testcases uses CPU's 0 and 8. In function "parse_setup_cpu_list", There is check to see if cpu number is greater than max cpu's possible in the system ie via "if (bind_cpu_0 >= g->p.nr_cpus || bind_cpu_1 >= g->p.nr_cpus) {". But it could happen that system has say 48 CPU's, but only number of online CPU's is 0-7. Other CPU's are offlined. Since "g->p.nr_cpus" is 48, so function will go ahead and set bit for CPU 8 also in cpumask ( td->bind_cpumask). bind_to_cpumask function is called to set affinity using sched_setaffinity and the cpumask. Since the CPU8 is not present, set affinity will fail here with EINVAL. Fix this issue by adding a check to make sure that, CPU's provided in the input argument values are online before proceeding further and skip the test. For this, include new helper function "is_cpu_online" in "tools/perf/util/header.c". Since "BIT(x)" definition will get included from header.h, remove that from bench/numa.c Reported-by: Disha Goel <[email protected]> Signed-off-by: Athira Jajeev <[email protected]> Tested-by: Disha Goel <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kajol Jain <[email protected]> Cc: Madhavan Srinivasan <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Nageswara R Sastry <[email protected]> Cc: Srikar Dronamraju <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-14perf record: Fix per-thread optionAlexey Bayduraev1-5/+17
Per-thread mode doesn't have specific CPUs for events, add checks for this case. Minor fix to a pr_debug by Ian Rogers <[email protected]> to avoid an out of bound array access. Fixes: 7954f71689f90cb2 ("perf record: Introduce thread affinity and mmap masks") Reported-by: Ian Rogers <[email protected]> Signed-off-by: Alexey Bayduraev <[email protected]> Signed-off-by: Ian Rogers <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Alexey Bayduraev <[email protected]> Cc: Andi Kleen <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Riccardo Mancini <[email protected]> Cc: Stephane Eranian <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-14arm64: fix typos in commentsKen Kurematsu1-1/+1
Fix a typo "cortex" Signed-off-by: Ken Kurematsu <[email protected]> Link: https://lore.kernel.org/r/OSBPR01MB3288B15006E15C64D4D617F7DBEF9@OSBPR01MB3288.jpnprd01.prod.outlook.com Signed-off-by: Will Deacon <[email protected]>
2022-04-14arm64: Improve HAVE_DYNAMIC_FTRACE_WITH_REGS selection for clangNathan Chancellor1-2/+11
Will and Anders reported that using just 'CC=clang' with CONFIG_FTRACE=y and CONFIG_STACK_TRACER=y would result in an error while linking: aarch64-linux-gnu-ld: .init.data has both ordered [`__patchable_function_entries' in init/main.o] and unordered [`.meminit.data' in mm/sparse.o] sections aarch64-linux-gnu-ld: final link failed: bad value This error was exposed by commit f12b034afeb3 ("scripts/Makefile.clang: default to LLVM_IAS=1") in combination with binutils older than 2.36. When '-fpatchable-function-entry' was implemented in LLVM, two code paths were added for adding the section attributes, one for the integrated assembler and another for GNU as, due to binutils deficiencies at the time. If the integrated assembler was used, attributes that GNU ld < 2.36 could not handle were added, presumably with the assumption that use of the integrated assembler meant the whole LLVM stack was being used, namely ld.lld. Prior to the kernel change previously mentioned, that assumption was valid, as there were three commonly used combinations of tools for compiling, assembling, and linking respectively: $ make CC=clang (clang, GNU as, GNU ld) $ make LLVM=1 (clang, GNU as, ld.lld) $ make LLVM=1 LLVM_IAS=1 (clang, integrated assembler, ld.lld) After the default switch of the integrated assembler, the second and third commands become equivalent and the first command means "clang, integrated assembler, and GNU ld", which was not a combination that was considered when the aforementioned LLVM change was implemented. It is not possible to go back and fix LLVM, as this change was implemented in the 10.x series, which is no longer supported. To workaround this on the kernel side, split out the selection of HAVE_DYNAMIC_FTRACE_WITH_REGS to two separate configurations, one for GCC and one for clang. The GCC config inherits the '-fpatchable-function-entry' check. The Clang config does not it, as '-fpatchable-function-entry' is always available for LLVM 11.0.0 and newer, which is the supported range of versions for the kernel. The Clang config makes sure that the user is using GNU as or the integrated assembler with ld.lld or GNU ld 2.36 or newer, which will avoid the error above. Link: https://github.com/ClangBuiltLinux/linux/issues/1507 Link: https://github.com/ClangBuiltLinux/linux/issues/788 Link: https://lore.kernel.org/[email protected]/ Link: https://sourceware.org/bugzilla/show_bug.cgi?id=26256 Link: https://github.com/llvm/llvm-project/commit/7fa5290d5bd5632d7a36a4ea9f46e81e04fb819e Link: https://github.com/llvm/llvm-project/commit/853a2649160c1c80b9bbd38a20b53ca8fab704e8 Reported-by: Anders Roxell <[email protected]> Reported-by: Will Deacon <[email protected]> Tested-by: Will Deacon <[email protected]> Signed-off-by: Nathan Chancellor <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2022-04-14gpio: sim: fix setting and getting multiple linesBartosz Golaszewski1-2/+2
We need to take mask into account in the set/get_multiple() callbacks. Use bitmap_replace() instead of bitmap_copy(). Fixes: cb8c474e79be ("gpio: sim: new testing module") Cc: [email protected] Signed-off-by: Bartosz Golaszewski <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]>
2022-04-14net: bcmgenet: Revert "Use stronger register read/writes to assure ordering"Jeremy Linton1-2/+2
It turns out after digging deeper into this bug, that it was being triggered by GCC12 failing to call the bcmgenet_enable_dma() routine. Given that a gcc12 fix has been merged [1] and the genet driver now works properly when built with gcc12, this commit should be reverted. [1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=105160 https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=aabb9a261ef060cf24fd626713f1d7d9df81aa57 Fixes: 8d3ea3d402db ("net: bcmgenet: Use stronger register read/writes to assure ordering") Signed-off-by: Jeremy Linton <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-04-14rtnetlink: Fix handling of disabled L3 stats in RTM_GETSTATS repliesPetr Machata1-0/+3
When L3 stats are disabled, rtnl_offload_xstats_get_size_stats() returns size of 0, which is supposed to be an indication that the corresponding attribute should not be emitted. However, instead, the current code reserves a 0-byte attribute. The reason this does not show up as a citation on a kasan kernel is that netdev_offload_xstats_get(), which is supposed to fill in the data, never ends up getting called, because rtnl_offload_xstats_get_stats() notices that the stats are not actually used and skips the call. Thus a zero-length IFLA_OFFLOAD_XSTATS_L3_STATS attribute ends up in a response, confusing the userspace. Fix by skipping the L3-stats related block in rtnl_offload_xstats_fill(). Fixes: 0e7788fd7622 ("net: rtnetlink: Add UAPI for obtaining L3 offload xstats") Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Ido Schimmel <[email protected]> Link: https://lore.kernel.org/r/591b58e7623edc3eb66dd1fcfa8c8f133d090974.1649794741.git.petrm@nvidia.com Signed-off-by: Paolo Abeni <[email protected]>
2022-04-14net: dsa: felix: fix tagging protocol changes with multiple CPU portsVladimir Oltean1-0/+23
When the device tree has 2 CPU ports defined, a single one is active (has any dp->cpu_dp pointers point to it). Yet the second one is still a CPU port, and DSA still calls ->change_tag_protocol on it. On the NXP LS1028A, the CPU ports are ports 4 and 5. Port 4 is the active CPU port and port 5 is inactive. After the following commands: # Initial setting cat /sys/class/net/eno2/dsa/tagging ocelot echo ocelot-8021q > /sys/class/net/eno2/dsa/tagging echo ocelot > /sys/class/net/eno2/dsa/tagging traffic is now broken, because the driver has moved the NPI port from port 4 to port 5, unbeknown to DSA. The problem can be avoided by detecting that the second CPU port is unused, and not doing anything for it. Further rework will be needed when proper support for multiple CPU ports is added. Treat this as a bug and prepare current kernels to work in single-CPU mode with multiple-CPU DT blobs. Fixes: adb3dccf090b ("net: dsa: felix: convert to the new .change_tag_protocol DSA API") Signed-off-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-04-14tun: annotate access to queue->trans_startAntoine Tenart1-1/+1
Commit 5337824f4dc4 ("net: annotate accesses to queue->trans_start") introduced a new helper, txq_trans_cond_update, to update queue->trans_start using WRITE_ONCE. One snippet in drivers/net/tun.c was missed, as it was introduced roughly at the same time. Fixes: 5337824f4dc4 ("net: annotate accesses to queue->trans_start") Cc: Eric Dumazet <[email protected]> Signed-off-by: Antoine Tenart <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-04-14cifs: verify that tcon is valid before dereference in cifs_kill_sbRonnie Sahlberg1-3/+3
On umount, cifs_sb->tlink_tree might contain entries that do not represent a valid tcon. Check the tcon for error before we dereference it. Signed-off-by: Ronnie Sahlberg <[email protected]> Cc: [email protected] Reviewed-by: Shyam Prasad N <[email protected]> Reported-by: Xiaoli Feng <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-04-14Merge tag 'drm-msm-fixes-2022-04-13' of ↵Dave Airlie12-48/+109
https://gitlab.freedesktop.org/drm/msm into drm-fixes Some msm fixes for v5.18. kzalloc return checks, display fix, misc locking and scheduler bug, iommu present removal. Signed-off-by: Dave Airlie <[email protected]> From: Rob Clark <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGvuTwx09MKwK68KWXqi4o7LxDGMUz1=Z7xOS+i=OV84Ug@mail.gmail.com
2022-04-14Merge tag 'drm-intel-fixes-2022-04-13' of ↵Dave Airlie1-1/+1
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Correct legacy mmap disabling to use GRAPHICS_VER_FULL Signed-off-by: Dave Airlie <[email protected]> From: Joonas Lahtinen <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-04-14dma-direct: avoid redundant memory sync for swiotlbChao Gao1-1/+2
When we looked into FIO performance with swiotlb enabled in VM, we found swiotlb_bounce() is always called one more time than expected for each DMA read request. It turns out that the bounce buffer is copied to original DMA buffer twice after the completion of a DMA request (one is done by in dma_direct_sync_single_for_cpu(), the other by swiotlb_tbl_unmap_single()). But the content in bounce buffer actually doesn't change between the two rounds of copy. So, one round of copy is redundant. Pass DMA_ATTR_SKIP_CPU_SYNC flag to swiotlb_tbl_unmap_single() to skip the memory copy in it. This fix increases FIO 64KB sequential read throughput in a guest with swiotlb=force by 5.6%. Fixes: 55897af63091 ("dma-direct: merge swiotlb_dma_ops into the dma_direct code") Reported-by: Wang Zhaoyang1 <[email protected]> Reported-by: Gao Liang <[email protected]> Signed-off-by: Chao Gao <[email protected]> Reviewed-by: Kevin Tian <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]>
2022-04-13drm/amd/display: remove dtbclk_ss compensation for dcn316Charlene Liu3-4/+4
[why] dcn316's dtbclk is from non_ss clock source. no compensation required here. Reviewed-by: Chris Park <[email protected]> Acked-by: Pavle Kotarac <[email protected]> Signed-off-by: Charlene Liu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-13drm/amdgpu: Enable gfxoff quirk on MacBook ProTomasz Moń1-0/+2
Enabling gfxoff quirk results in perfectly usable graphical user interface on MacBook Pro (15-inch, 2019) with Radeon Pro Vega 20 4 GB. Without the quirk, X server is completely unusable as every few seconds there is gpu reset due to ring gfx timeout. Signed-off-by: Tomasz Moń <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-04-13drm/amdgpu: Ensure HDA function is suspended before ASIC resetKai-Heng Feng1-6/+12
DP/HDMI audio on AMD PRO VII stops working after S3: [ 149.450391] amdgpu 0000:63:00.0: amdgpu: MODE1 reset [ 149.450395] amdgpu 0000:63:00.0: amdgpu: GPU mode1 reset [ 149.450494] amdgpu 0000:63:00.0: amdgpu: GPU psp mode1 reset [ 149.983693] snd_hda_intel 0000:63:00.1: refused to change power state from D0 to D3hot [ 150.003439] amdgpu 0000:63:00.0: refused to change power state from D0 to D3hot ... [ 155.432975] snd_hda_intel 0000:63:00.1: CORB reset timeout#2, CORBRP = 65535 The offending commit is daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)"). Commit 34452ac3038a7 ("drm/amdgpu: don't use BACO for reset in S3 ") doesn't help, so the issue is something different. Assuming that to make HDA resume to D0 fully realized, it needs to be successfully put to D3 first. And this guesswork proves working, by moving amdgpu_asic_reset() to noirq callback, so it's called after HDA function is in D3. Fixes: daf8de0874ab5b ("drm/amdgpu: always reset the asic in suspend (v2)") Signed-off-by: Kai-Heng Feng <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-04-13drm/amdgpu: fix VCN 3.1.2 firmware nameAlex Deucher1-1/+1
Drop the trailing vcn. Fixes: afc2f276057ea1 ("drm/amdgpu/vcn: add vcn support for vcn 3.1.2") Reviewed-by: James Zhu <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2022-04-13drm/amd/display: don't ignore alpha property on pre-multiplied modeMelissa Wen2-10/+18
"Pre-multiplied" is the default pixel blend mode for KMS/DRM, as documented in supported_modes of drm_plane_create_blend_mode_property(): https://cgit.freedesktop.org/drm/drm-misc/tree/drivers/gpu/drm/drm_blend.c In this mode, both 'pixel alpha' and 'plane alpha' participate in the calculation, as described by the pixel blend mode formula in KMS/DRM documentation: out.rgb = plane_alpha * fg.rgb + (1 - (plane_alpha * fg.alpha)) * bg.rgb Considering the blend config mechanisms we have in the driver so far, the alpha mode that better fits this blend mode is the _PER_PIXEL_ALPHA_COMBINED_GLOBAL_GAIN, where the value for global_gain is the plane alpha (global_alpha). With this change, alpha property stops to be ignored. It also addresses Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1734 v2: * keep the 8-bit value for global_alpha_value (Nicholas) * correct the logical ordering for combined global gain (Nicholas) * apply to dcn10 too (Nicholas) Signed-off-by: Melissa Wen <[email protected]> Tested-by: Rodrigo Siqueira <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Tested-by: Simon Ser <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2022-04-13perf tools: Fix segfault accessing sample_id xyarrayAdrian Hunter1-2/+1
perf_evsel::sample_id is an xyarray which can cause a segfault when accessed beyond its size. e.g. # perf record -e intel_pt// -C 1 sleep 1 Segmentation fault (core dumped) # That is happening because a dummy event is opened to capture text poke events accross all CPUs, however the mmap logic is allocating according to the number of user_requested_cpus. In general, perf sometimes uses the evsel cpus to open events, and sometimes the evlist user_requested_cpus. However, it is not necessary to determine which case is which because the opened event file descriptors are also in an xyarray, the size of whch can be used to correctly allocate the size of the sample_id xyarray, because there is one ID per file descriptor. Note, in the affected code path, perf_evsel fd array is subsequently used to get the file descriptor for the mmap, so it makes sense for the xyarrays to be the same size there. Fixes: d1a177595b3a824c ("libperf: Adopt perf_evlist__mmap()/munmap() from tools/perf") Fixes: 246eba8e9041c477 ("perf tools: Add support for PERF_RECORD_TEXT_POKE") Signed-off-by: Adrian Hunter <[email protected]> Acked-by: Ian Rogers <[email protected]> Cc: Adrian Hunter <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: [email protected] # 5.5+ Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-13perf stat: Fix error check return value of hashmap__new(), must use IS_ERR()Lv Ruyi1-1/+2
hashmap__new() returns ERR_PTR(-ENOMEM) when it fails, so we should use IS_ERR() to check it in error handling path. Reported-by: Zeal Robot <[email protected]> Signed-off-by: Lv Ruyi <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Ian Rogers <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: James Clark <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2022-04-13cpu/hotplug: Remove the 'cpu' member of cpuhp_cpu_stateSteven Price1-18/+18
Currently the setting of the 'cpu' member of struct cpuhp_cpu_state in cpuhp_create() is too late as it is used earlier in _cpu_up(). If kzalloc_node() in __smpboot_create_thread() fails then the rollback will be done with st->cpu==0 causing CPU0 to be erroneously set to be dying, causing the scheduler to get mightily confused and throw its toys out of the pram. However the cpu number is actually available directly, so simply remove the 'cpu' member and avoid the problem in the first place. Fixes: 2ea46c6fc945 ("cpumask/hotplug: Fix cpu_dying() state tracking") Signed-off-by: Steven Price <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-13vfio/pci: Fix vf_token mechanism when device-specific VF drivers are usedJason Gunthorpe2-50/+76
get_pf_vdev() tries to check if a PF is a VFIO PF by looking at the driver: if (pci_dev_driver(physfn) != pci_dev_driver(vdev->pdev)) { However now that we have multiple VF and PF drivers this is no longer reliable. This means that security tests realted to vf_token can be skipped by mixing and matching different VFIO PCI drivers. Instead of trying to use the driver core to find the PF devices maintain a linked list of all PF vfio_pci_core_device's that we have called pci_enable_sriov() on. When registering a VF just search the list to see if the PF is present and record the match permanently in the struct. PCI core locking prevents a PF from passing pci_disable_sriov() while VF drivers are attached so the VFIO owned PF becomes a static property of the VF. In common cases where vfio does not own the PF the global list remains empty and the VF's pointer is statically NULL. This also fixes a lockdep splat from recursive locking of the vfio_group::device_lock between vfio_device_get_from_name() and vfio_device_get_from_dev(). If the VF and PF share the same group this would deadlock. Fixes: ff53edf6d6ab ("vfio/pci: Split the pci_driver code out of vfio_pci_core.c") Signed-off-by: Jason Gunthorpe <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alex Williamson <[email protected]>
2022-04-13dm zone: fix NULL pointer dereference in dm_zone_map_bioMike Snitzer1-21/+28
Commit 0fbb4d93b38b ("dm: add dm_submit_bio_remap interface") changed the alloc_io() function to delay the initialization of struct dm_io's orig_bio member, leaving it NULL until after the dm_io and associated user submitted bio is processed by __split_and_process_bio(). This change causes a NULL pointer dereference in dm_zone_map_bio() when the original user bio is inspected to detect the need for zone append command emulation. Fix this NULL pointer by updating dm_zone_map_bio() to not access ->orig_bio when the same info can be accessed from the clone of the ->orig_bio _before_ any ->map processing. Save off the bio_op() and bio_sectors() for the clone and then use the saved orig_bio_details as needed. Fixes: 0fbb4d93b38b ("dm: add dm_submit_bio_remap interface") Reported-by: Damien Le Moal <[email protected]> Tested-by: Damien Le Moal <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-04-13dm mpath: only use ktime_get_ns() in historical selectorKhazhismel Kumykov1-6/+5
Mixing sched_clock() and ktime_get_ns() usage will give bad results. Switch hst_select_path() from using sched_clock() to ktime_get_ns(). Also rename path_service_time()'s 'sched_now' variable to 'now'. Fixes: 2613eab11996 ("dm mpath: add Historical Service Time Path Selector") Signed-off-by: Khazhismel Kumykov <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-04-13cifs: potential buffer overflow in handling symlinksHarshit Mogalapalli1-0/+3
Smatch printed a warning: arch/x86/crypto/poly1305_glue.c:198 poly1305_update_arch() error: __memcpy() 'dctx->buf' too small (16 vs u32max) It's caused because Smatch marks 'link_len' as untrusted since it comes from sscanf(). Add a check to ensure that 'link_len' is not larger than the size of the 'link_str' buffer. Fixes: c69c1b6eaea1 ("cifs: implement CIFSParseMFSymlink()") Signed-off-by: Harshit Mogalapalli <[email protected]> Reviewed-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-04-13smp: Fix offline cpu check in flush_smp_call_function_queue()Nadav Amit1-1/+1
The check in flush_smp_call_function_queue() for callbacks that are sent to offline CPUs currently checks whether the queue is empty. However, flush_smp_call_function_queue() has just deleted all the callbacks from the queue and moved all the entries into a local list. This checks would only be positive if some callbacks were added in the short time after llist_del_all() was called. This does not seem to be the intention of this check. Change the check to look at the local list to which the entries were moved instead of the queue from which all the callbacks were just removed. Fixes: 8d056c48e4862 ("CPU hotplug, smp: flush any pending IPI callbacks before CPU offline") Signed-off-by: Nadav Amit <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-13dm integrity: fix memory corruption when tag_size is less than digest sizeMikulas Patocka1-2/+5
It is possible to set up dm-integrity in such a way that the "tag_size" parameter is less than the actual digest size. In this situation, a part of the digest beyond tag_size is ignored. In this case, dm-integrity would write beyond the end of the ic->recalc_tags array and corrupt memory. The corruption happened in integrity_recalc->integrity_sector_checksum->crypto_shash_final. Fix this corruption by increasing the tags array so that it has enough padding at the end to accomodate the loop in integrity_recalc() being able to write a full digest size for the last member of the tags array. Cc: [email protected] # v4.19+ Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-04-13io_uring: fix poll error reportingPavel Begunkov1-3/+2
We should not return an error code in req->result in io_poll_check_events(), because it may get mangled and returned as success. Just return the error code directly, the callers will fail the request or proceed accordingly. Fixes: 6bf9c47a3989 ("io_uring: defer file assignment") Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/5f03514ee33324dc811fb93df84aee0f695fb044.1649862516.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-04-13io_uring: fix poll file assign deadlockPavel Begunkov1-1/+2
We pass "unlocked" into io_assign_file() in io_poll_check_events(), which can lead to double locking. Fixes: 6bf9c47a3989 ("io_uring: defer file assignment") Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/2476d4ae46554324b599ee4055447b105f20a75a.1649862516.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-04-13io_uring: use right issue_flags for splice/teePavel Begunkov1-2/+2
Pass right issue_flags into into io_file_get_fixed() instead of IO_URING_F_UNLOCKED. It's probably not a problem at the moment but let's do it safer. Fixes: 6bf9c47a3989 ("io_uring: defer file assignment") Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/7d242daa9df5d776907686977cd29fbceb4a2d8d.1649862516.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-04-13e1000e: Fix possible overflow in LTR decodingSasha Neftin1-2/+2
When we decode the latency and the max_latency, u16 value may not fit the required size and could lead to the wrong LTR representation. Scaling is represented as: scale 0 - 1 (2^(5*0)) = 2^0 scale 1 - 32 (2^(5 *1))= 2^5 scale 2 - 1024 (2^(5 *2)) =2^10 scale 3 - 32768 (2^(5 *3)) =2^15 scale 4 - 1048576 (2^(5 *4)) = 2^20 scale 5 - 33554432 (2^(5 *4)) = 2^25 scale 4 and scale 5 required 20 and 25 bits respectively. scale 6 reserved. Replace the u16 type with the u32 type and allow corrected LTR representation. Cc: [email protected] Fixes: 44a13a5d99c7 ("e1000e: Fix the max snoop/no-snoop latency for 10M") Reported-by: James Hutchinson <[email protected]> Link: https://bugzilla.kernel.org/show_bug.cgi?id=215689 Suggested-by: Dima Ruinskiy <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Naama Meir <[email protected]> Tested-by: James Hutchinson <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-13igc: Fix suspending when PTM is activeVinicius Costa Gomes1-1/+14
Some mainboard/CPU combinations, in particular, Alder Lake-S with a W680 mainboard, have shown problems (system hangs usually, no kernel logs) with suspend/resume when PCIe PTM is enabled and active. In some cases, it could be reproduced when removing the igc module. The best we can do is to stop PTM dialogs from the downstream/device side before the interface is brought down. PCIe PTM will be re-enabled when the interface is being brought up. Fixes: a90ec8483732 ("igc: Add support for PTP getcrosststamp()") Signed-off-by: Vinicius Costa Gomes <[email protected]> Tested-by: Naama Meir <[email protected]> Acked-by: Paul Menzel <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-13spi: atmel-quadspi: Fix the buswidth adjustment between spi-mem and controllerTudor Ambarus1-0/+3
Use the spi_mem_default_supports_op() core helper in order to take into account the buswidth specified by the user in device tree. Cc: <[email protected]> Fixes: 0e6aae08e9ae ("spi: Add QuadSPI driver for Atmel SAMA5D2") Signed-off-by: Tudor Ambarus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-04-13igc: Fix BUG: scheduling while atomicSasha Neftin1-2/+2
Replace usleep_range() method with udelay() method to allow atomic contexts in low-level MDIO access functions. The following issue can be seen by doing the following: $ modprobe -r bonding $ modprobe -v bonding max_bonds=1 mode=1 miimon=100 use_carrier=0 $ ip link set bond0 up $ ifenslave bond0 eth0 eth1 [ 982.357308] BUG: scheduling while atomic: kworker/u64:0/9/0x00000002 [ 982.364431] INFO: lockdep is turned off. [ 982.368824] Modules linked in: bonding sctp ip6_udp_tunnel udp_tunnel mlx4_ib ib_uverbs ib_core mlx4_en mlx4_core nfp tls sunrpc intel_rapl_msr iTCO_wdt iTCO_vendor_support mxm_wmi dcdbas intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel kvm irqbypass crct10dif_pclmul crc32_pclmul ghash_clmulni_intel rapl intel_cstate intel_uncore pcspkr lpc_ich mei_me ipmi_ssif mei ipmi_si ipmi_devintf ipmi_msghandler wmi acpi_power_meter xfs libcrc32c sr_mod cdrom sd_mod t10_pi sg mgag200 drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops drm ahci libahci crc32c_intel libata i2c_algo_bit tg3 megaraid_sas igc dm_mirror dm_region_hash dm_log dm_mod [last unloaded: bonding] [ 982.437941] CPU: 25 PID: 9 Comm: kworker/u64:0 Kdump: loaded Tainted: G W --------- - - 4.18.0-348.el8.x86_64+debug #1 [ 982.451333] Hardware name: Dell Inc. PowerEdge R730/0H21J3, BIOS 2.7.0 12/005/2017 [ 982.459791] Workqueue: bond0 bond_mii_monitor [bonding] [ 982.465622] Call Trace: [ 982.468355] dump_stack+0x8e/0xd0 [ 982.472056] __schedule_bug.cold.60+0x3a/0x60 [ 982.476919] __schedule+0x147b/0x1bc0 [ 982.481007] ? firmware_map_remove+0x16b/0x16b [ 982.485967] ? hrtimer_fixup_init+0x40/0x40 [ 982.490625] schedule+0xd9/0x250 [ 982.494227] schedule_hrtimeout_range_clock+0x10d/0x2c0 [ 982.500058] ? hrtimer_nanosleep_restart+0x130/0x130 [ 982.505598] ? hrtimer_init_sleeper_on_stack+0x90/0x90 [ 982.511332] ? usleep_range+0x88/0x130 [ 982.515514] ? recalibrate_cpu_khz+0x10/0x10 [ 982.520279] ? ktime_get+0xab/0x1c0 [ 982.524175] ? usleep_range+0x88/0x130 [ 982.528355] usleep_range+0xdd/0x130 [ 982.532344] ? console_conditional_schedule+0x30/0x30 [ 982.537987] ? igc_put_hw_semaphore+0x17/0x60 [igc] [ 982.543432] igc_read_phy_reg_gpy+0x111/0x2b0 [igc] [ 982.548887] igc_phy_has_link+0xfa/0x260 [igc] [ 982.553847] ? igc_get_phy_id+0x210/0x210 [igc] [ 982.558894] ? lock_acquire+0x34d/0x890 [ 982.563187] ? lock_downgrade+0x710/0x710 [ 982.567659] ? rcu_read_unlock+0x50/0x50 [ 982.572039] igc_check_for_copper_link+0x106/0x210 [igc] [ 982.577970] ? igc_config_fc_after_link_up+0x840/0x840 [igc] [ 982.584286] ? rcu_read_unlock+0x50/0x50 [ 982.588661] ? lock_release+0x591/0xb80 [ 982.592939] ? lock_release+0x591/0xb80 [ 982.597220] igc_has_link+0x113/0x330 [igc] [ 982.601887] ? lock_downgrade+0x710/0x710 [ 982.606362] igc_ethtool_get_link+0x6d/0x90 [igc] [ 982.611614] bond_check_dev_link+0x131/0x2c0 [bonding] [ 982.617350] ? bond_time_in_interval+0xd0/0xd0 [bonding] [ 982.623277] ? rcu_read_lock_held+0x62/0xc0 [ 982.627944] ? rcu_read_lock_sched_held+0xe0/0xe0 [ 982.633198] bond_mii_monitor+0x314/0x2500 [bonding] [ 982.638738] ? lock_contended+0x880/0x880 [ 982.643214] ? bond_miimon_link_change+0xa0/0xa0 [bonding] [ 982.649336] ? lock_acquire+0x34d/0x890 [ 982.653615] ? lock_downgrade+0x710/0x710 [ 982.658089] ? debug_object_deactivate+0x221/0x340 [ 982.663436] ? rcu_read_unlock+0x50/0x50 [ 982.667811] ? debug_print_object+0x2b0/0x2b0 [ 982.672672] ? __switch_to_asm+0x41/0x70 [ 982.677049] ? __switch_to_asm+0x35/0x70 [ 982.681426] ? _raw_spin_unlock_irq+0x24/0x40 [ 982.686288] ? trace_hardirqs_on+0x20/0x195 [ 982.690956] ? _raw_spin_unlock_irq+0x24/0x40 [ 982.695818] process_one_work+0x8f0/0x1770 [ 982.700390] ? pwq_dec_nr_in_flight+0x320/0x320 [ 982.705443] ? debug_show_held_locks+0x50/0x50 [ 982.710403] worker_thread+0x87/0xb40 [ 982.714489] ? process_one_work+0x1770/0x1770 [ 982.719349] kthread+0x344/0x410 [ 982.722950] ? kthread_insert_work_sanity_check+0xd0/0xd0 [ 982.728975] ret_from_fork+0x3a/0x50 Fixes: 5586838fe9ce ("igc: Add code for PHY support") Reported-by: Corinna Vinschen <[email protected]> Suggested-by: Dima Ruinskiy <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Corinna Vinschen <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-13igc: Fix infinite loop in release_swfw_syncSasha Neftin1-2/+9
An infinite loop may occur if we fail to acquire the HW semaphore, which is needed for resource release. This will typically happen if the hardware is surprise-removed. At this stage there is nothing to do, except log an error and quit. Fixes: c0071c7aa5fe ("igc: Add HW initialization code") Suggested-by: Dima Ruinskiy <[email protected]> Signed-off-by: Sasha Neftin <[email protected]> Tested-by: Naama Meir <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-04-13nfc: nci: add flush_workqueue to prevent uafLin Ma1-0/+4
Our detector found a concurrent use-after-free bug when detaching an NCI device. The main reason for this bug is the unexpected scheduling between the used delayed mechanism (timer and workqueue). The race can be demonstrated below: Thread-1 Thread-2 | nci_dev_up() | nci_open_device() | __nci_request(nci_reset_req) | nci_send_cmd | queue_work(cmd_work) nci_unregister_device() | nci_close_device() | ... del_timer_sync(cmd_timer)[1] | ... | Worker nci_free_device() | nci_cmd_work() kfree(ndev)[3] | mod_timer(cmd_timer)[2] In short, the cleanup routine thought that the cmd_timer has already been detached by [1] but the mod_timer can re-attach the timer [2], even it is already released [3], resulting in UAF. This UAF is easy to trigger, crash trace by POC is like below [ 66.703713] ================================================================== [ 66.703974] BUG: KASAN: use-after-free in enqueue_timer+0x448/0x490 [ 66.703974] Write of size 8 at addr ffff888009fb7058 by task kworker/u4:1/33 [ 66.703974] [ 66.703974] CPU: 1 PID: 33 Comm: kworker/u4:1 Not tainted 5.18.0-rc2 #5 [ 66.703974] Workqueue: nfc2_nci_cmd_wq nci_cmd_work [ 66.703974] Call Trace: [ 66.703974] <TASK> [ 66.703974] dump_stack_lvl+0x57/0x7d [ 66.703974] print_report.cold+0x5e/0x5db [ 66.703974] ? enqueue_timer+0x448/0x490 [ 66.703974] kasan_report+0xbe/0x1c0 [ 66.703974] ? enqueue_timer+0x448/0x490 [ 66.703974] enqueue_timer+0x448/0x490 [ 66.703974] __mod_timer+0x5e6/0xb80 [ 66.703974] ? mark_held_locks+0x9e/0xe0 [ 66.703974] ? try_to_del_timer_sync+0xf0/0xf0 [ 66.703974] ? lockdep_hardirqs_on_prepare+0x17b/0x410 [ 66.703974] ? queue_work_on+0x61/0x80 [ 66.703974] ? lockdep_hardirqs_on+0xbf/0x130 [ 66.703974] process_one_work+0x8bb/0x1510 [ 66.703974] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 66.703974] ? pwq_dec_nr_in_flight+0x230/0x230 [ 66.703974] ? rwlock_bug.part.0+0x90/0x90 [ 66.703974] ? _raw_spin_lock_irq+0x41/0x50 [ 66.703974] worker_thread+0x575/0x1190 [ 66.703974] ? process_one_work+0x1510/0x1510 [ 66.703974] kthread+0x2a0/0x340 [ 66.703974] ? kthread_complete_and_exit+0x20/0x20 [ 66.703974] ret_from_fork+0x22/0x30 [ 66.703974] </TASK> [ 66.703974] [ 66.703974] Allocated by task 267: [ 66.703974] kasan_save_stack+0x1e/0x40 [ 66.703974] __kasan_kmalloc+0x81/0xa0 [ 66.703974] nci_allocate_device+0xd3/0x390 [ 66.703974] nfcmrvl_nci_register_dev+0x183/0x2c0 [ 66.703974] nfcmrvl_nci_uart_open+0xf2/0x1dd [ 66.703974] nci_uart_tty_ioctl+0x2c3/0x4a0 [ 66.703974] tty_ioctl+0x764/0x1310 [ 66.703974] __x64_sys_ioctl+0x122/0x190 [ 66.703974] do_syscall_64+0x3b/0x90 [ 66.703974] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 66.703974] [ 66.703974] Freed by task 406: [ 66.703974] kasan_save_stack+0x1e/0x40 [ 66.703974] kasan_set_track+0x21/0x30 [ 66.703974] kasan_set_free_info+0x20/0x30 [ 66.703974] __kasan_slab_free+0x108/0x170 [ 66.703974] kfree+0xb0/0x330 [ 66.703974] nfcmrvl_nci_unregister_dev+0x90/0xd0 [ 66.703974] nci_uart_tty_close+0xdf/0x180 [ 66.703974] tty_ldisc_kill+0x73/0x110 [ 66.703974] tty_ldisc_hangup+0x281/0x5b0 [ 66.703974] __tty_hangup.part.0+0x431/0x890 [ 66.703974] tty_release+0x3a8/0xc80 [ 66.703974] __fput+0x1f0/0x8c0 [ 66.703974] task_work_run+0xc9/0x170 [ 66.703974] exit_to_user_mode_prepare+0x194/0x1a0 [ 66.703974] syscall_exit_to_user_mode+0x19/0x50 [ 66.703974] do_syscall_64+0x48/0x90 [ 66.703974] entry_SYSCALL_64_after_hwframe+0x44/0xae To fix the UAF, this patch adds flush_workqueue() to ensure the nci_cmd_work is finished before the following del_timer_sync. This combination will promise the timer is actually detached. Fixes: 6a2968aaf50c ("NFC: basic NCI protocol implementation") Signed-off-by: Lin Ma <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-13spi: cadence-quadspi: fix incorrect supports_op() return valueMatthias Schiffer1-2/+17
Since the conversion to spi-mem, the driver advertised support for various operations that cqspi_set_protocol() was never expected to handle correctly - in particuar all non-DTR operations with command or address buswidth > 1. For DTR, all operations except for 8-8-8 would fail, as cqspi_set_protocol() returns -EINVAL. In non-DTR mode, this resulted in data corruption for SPI-NOR flashes that support such operations. As a minimal fix that can be backported to stable kernels, simply disallow the unsupported operations again to avoid this issue. Fixes: a314f6367787 ("mtd: spi-nor: Convert cadence-quadspi to use spi-mem framework") Signed-off-by: Matthias Schiffer <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-04-13net: dsa: realtek: don't parse compatible string for RTL8366SAlvin Šipraga1-5/+0
This switch is not even supported, but if someone were to actually put this compatible string "realtek,rtl8366s" in their device tree, they would be greeted with a kernel panic because the probe function would dereference NULL. So let's just remove it. Link: https://lore.kernel.org/all/CACRpkdYdKZs0WExXc3=0yPNOwP+oOV60HRz7SRoGjZvYHaT=1g@mail.gmail.com/ Signed-off-by: Alvin Šipraga <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-13net: dsa: realtek: fix Kconfig to assure consistent driver linkageAlvin Šipraga1-9/+21
The kernel test robot reported a build failure: or1k-linux-ld: drivers/net/dsa/realtek/realtek-smi.o:(.rodata+0x16c): undefined reference to `rtl8366rb_variant' ... with the following build configuration: CONFIG_NET_DSA_REALTEK=y CONFIG_NET_DSA_REALTEK_SMI=y CONFIG_NET_DSA_REALTEK_RTL8365MB=y CONFIG_NET_DSA_REALTEK_RTL8366RB=m The problem here is that the realtek-smi interface driver gets built-in, while the rtl8366rb switch subdriver gets built as a module, hence the symbol rtl8366rb_variant is not reachable when defining the OF device table in the interface driver. The Kconfig dependencies don't help in this scenario because they just say that the subdriver(s) depend on at least one interface driver. In fact, the subdrivers don't depend on the interface drivers at all, and can even be built even in their absence. Somewhat strangely, the interface drivers can also be built in the absence of any subdriver, BUT, if a subdriver IS enabled, then it must be reachable according to the linkage of the interface driver: effectively what the IS_REACHABLE() macro achieves. If it is not reachable, the above kind of linker error will be observed. Rather than papering over the above build error by simply using IS_REACHABLE(), we can do a little better and admit that it is actually the interface drivers that have a dependency on the subdrivers. So this patch does exactly that. Specifically, we ensure that: 1. The interface drivers' Kconfig symbols must have a value no greater than the value of any subdriver Kconfig symbols. 2. The subdrivers should by default enable both interface drivers, since most users probably want at least one of them; those interface drivers can be explicitly disabled however. What this doesn't do is prevent a user from building only a subdriver, without any interface driver. To that end, add an additional line of help in the menu to guide users in the right direction. Link: https://lore.kernel.org/all/[email protected]/ Reported-by: kernel test robot <[email protected]> Fixes: aac94001067d ("net: dsa: realtek: add new mdio interface for drivers") Signed-off-by: Alvin Šipraga <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-13dma-buf-map: remove renamed header fileKarol Herbst1-266/+0
commit 7938f4218168 ("dma-buf-map: Rename to iosys-map") already renamed this file, but it got brought back by a merge. Delete it for real this time. Fixes: 30424ebae8df ("Merge tag 'drm-intel-gt-next-2022-02-17' of git://anongit.freedesktop.org/drm/drm-intel into drm-intel-next") Cc: Rodrigo Vivi <[email protected]> Cc: Lucas De Marchi <[email protected]> Cc: [email protected] Signed-off-by: Karol Herbst <[email protected]> Reviewed-by: Michel Dänzer <[email protected]> Reviewed-by: Thomas Zimmermann <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-04-13spi: intel: Add support for Raptor Lake-S SPI serial flashMika Westerberg1-0/+1
Intel Raptor Lake-S has the same SPI serial flash controller as Alder Lake-P. Add Raptor Lake-S PCI ID to the driver list of supported devices. Signed-off-by: Mika Westerberg <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-04-13Merge tag 'wireless-2022-04-13' of ↵David S. Miller9-29/+46
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v5.18 First set of fixes for v5.18. Maintainers file updates, two compilation warning fixes, one revert for ath11k and smaller fixes to drivers and stack. All the usual stuff. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-04-13random: make random_get_entropy() return an unsigned longJason A. Donenfeld2-14/+8
Some implementations were returning type `unsigned long`, while others that fell back to get_cycles() were implicitly returning a `cycles_t` or an untyped constant int literal. That makes for weird and confusing code, and basically all code in the kernel already handled it like it was an `unsigned long`. I recently tried to handle it as the largest type it could be, a `cycles_t`, but doing so doesn't really help with much. Instead let's just make random_get_entropy() return an unsigned long all the time. This also matches the commonly used `arch_get_random_long()` function, so now RDRAND and RDTSC return the same sized integer, which means one can fallback to the other more gracefully. Cc: Dominik Brodowski <[email protected]> Cc: Theodore Ts'o <[email protected]> Acked-by: Thomas Gleixner <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]>
2022-04-13random: allow partial reads if later user copies failJason A. Donenfeld1-10/+12
Rather than failing entirely if a copy_to_user() fails at some point, instead we should return a partial read for the amount that succeeded prior, unless none succeeded at all, in which case we return -EFAULT as before. This makes it consistent with other reader interfaces. For example, the following snippet for /dev/zero outputs "4" followed by "1": int fd; void *x = mmap(NULL, 4096, PROT_WRITE, MAP_ANONYMOUS | MAP_PRIVATE, -1, 0); assert(x != MAP_FAILED); fd = open("/dev/zero", O_RDONLY); assert(fd >= 0); printf("%zd\n", read(fd, x, 4)); printf("%zd\n", read(fd, x + 4095, 4)); close(fd); This brings that same standard behavior to the various RNG reader interfaces. While we're at it, we can streamline the loop logic a little bit. Suggested-by: Linus Torvalds <[email protected]> Cc: Jann Horn <[email protected]> Signed-off-by: Jason A. Donenfeld <[email protected]>
2022-04-13net: ftgmac100: access hardware register after clock readyDylan Hung1-5/+5
AST2600 MAC register 0x58 is writable only when the MAC clock is enabled. Usually, the MAC clock is enabled by the bootloader so register 0x58 is set normally when the bootloader is involved. To make ast2600 ftgmac100 work without the bootloader, postpone the register write until the clock is ready. Fixes: 137d23cea1c0 ("net: ftgmac100: Fix Aspeed ast2600 TX hang issue") Signed-off-by: Dylan Hung <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-13Revert "net: dsa: setup master before ports"Vladimir Oltean1-13/+10
This reverts commit 11fd667dac315ea3f2469961f6d2869271a46cae. dsa_slave_change_mtu() updates the MTU of the DSA master and of the associated CPU port, but only if it detects a change to the master MTU. The blamed commit in the Fixes: tag below addressed a regression where dsa_slave_change_mtu() would return early and not do anything due to ds->ops->port_change_mtu() not being implemented. However, that commit also had the effect that the master MTU got set up to the correct value by dsa_master_setup(), but the associated CPU port's MTU did not get updated. This causes breakage for drivers that rely on the ->port_change_mtu() DSA call to account for the tagging overhead on the CPU port, and don't set up the initial MTU during the setup phase. Things actually worked before because they were in a fragile equilibrium where dsa_slave_change_mtu() was called before dsa_master_setup() was. So dsa_slave_change_mtu() could actually detect a change and update the CPU port MTU too. Restore the code to the way things used to work by reverting the reorder of dsa_tree_setup_master() and dsa_tree_setup_ports(). That change did not have a concrete motivation going for it anyway, it just looked better. Fixes: 066dfc429040 ("Revert "net: dsa: stop updating master MTU from master.c"") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-04-13macvlan: Fix leaking skb in source mode with nodst optionMartin Willi1-2/+6
The MACVLAN receive handler clones skbs to all matching source MACVLAN interfaces, before it passes the packet along to match on destination based MACVLANs. When using the MACVLAN nodst mode, passing the packet to destination based MACVLANs is omitted and the handler returns with RX_HANDLER_CONSUMED. However, the passed skb is not freed, leaking for any packet processed with the nodst option. Properly free the skb when consuming packets to fix that leak. Fixes: 427f0c8c194b ("macvlan: Add nodst option to macvlan type source") Signed-off-by: Martin Willi <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.