Age | Commit message (Collapse) | Author | Files | Lines |
|
When a disk has been marked dead, don't print warnings for I/O errors
as they are very much expected.
Signed-off-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
kernel ulong and compat_ulong_t may not be same width. Use type directly
to eliminate mismatches.
This would result in truncation rather than EFBIG for 32bit mode for
large disks.
Reviewed-by: Bart Van Assche <[email protected]>
Signed-off-by: Khazhismel Kumykov <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Signed-off-by: Sukadev Bhattiprolu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The displayed list of Ethernet devices in make menuconfig
has gotten out of order. This is mostly due to changes in vendor
names etc, but also because of new Microsoft entry in wrong place.
This restores so that the display is in order even if the names
of the sub directories are not.
Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)")
Signed-off-by: Stephen Hemminger <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Given a sufficiently large number of actions, while copying and
reserving memory for a new action of a new flow, if next_offset is
greater than MAX_ACTIONS_BUFSIZE, the function reserve_sfa_size() does
not return -EMSGSIZE as expected, but it allocates MAX_ACTIONS_BUFSIZE
bytes increasing actions_len by req_size. This can then lead to an OOB
write access, especially when further actions need to be copied.
Fix it by rearranging the flow action size check.
KASAN splat below:
==================================================================
BUG: KASAN: slab-out-of-bounds in reserve_sfa_size+0x1ba/0x380 [openvswitch]
Write of size 65360 at addr ffff888147e4001c by task handler15/836
CPU: 1 PID: 836 Comm: handler15 Not tainted 5.18.0-rc1+ #27
...
Call Trace:
<TASK>
dump_stack_lvl+0x45/0x5a
print_report.cold+0x5e/0x5db
? __lock_text_start+0x8/0x8
? reserve_sfa_size+0x1ba/0x380 [openvswitch]
kasan_report+0xb5/0x130
? reserve_sfa_size+0x1ba/0x380 [openvswitch]
kasan_check_range+0xf5/0x1d0
memcpy+0x39/0x60
reserve_sfa_size+0x1ba/0x380 [openvswitch]
__add_action+0x24/0x120 [openvswitch]
ovs_nla_add_action+0xe/0x20 [openvswitch]
ovs_ct_copy_action+0x29d/0x1130 [openvswitch]
? __kernel_text_address+0xe/0x30
? unwind_get_return_address+0x56/0xa0
? create_prof_cpu_mask+0x20/0x20
? ovs_ct_verify+0xf0/0xf0 [openvswitch]
? prep_compound_page+0x198/0x2a0
? __kasan_check_byte+0x10/0x40
? kasan_unpoison+0x40/0x70
? ksize+0x44/0x60
? reserve_sfa_size+0x75/0x380 [openvswitch]
__ovs_nla_copy_actions+0xc26/0x2070 [openvswitch]
? __zone_watermark_ok+0x420/0x420
? validate_set.constprop.0+0xc90/0xc90 [openvswitch]
? __alloc_pages+0x1a9/0x3e0
? __alloc_pages_slowpath.constprop.0+0x1da0/0x1da0
? unwind_next_frame+0x991/0x1e40
? __mod_node_page_state+0x99/0x120
? __mod_lruvec_page_state+0x2e3/0x470
? __kasan_kmalloc_large+0x90/0xe0
ovs_nla_copy_actions+0x1b4/0x2c0 [openvswitch]
ovs_flow_cmd_new+0x3cd/0xb10 [openvswitch]
...
Cc: [email protected]
Fixes: f28cd2af22a0 ("openvswitch: fix flow actions reallocation")
Signed-off-by: Paolo Valerio <[email protected]>
Acked-by: Eelco Chaudron <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Feng reported an skb_under_panic BUG triggered by running
test_ip6gretap() in tools/testing/selftests/bpf/test_tunnel.sh:
[ 82.492551] skbuff: skb_under_panic: text:ffffffffb268bb8e len:403 put:12 head:ffff9997c5480000 data:ffff9997c547fff8 tail:0x18b end:0x2c0 dev:ip6gretap11
<...>
[ 82.607380] Call Trace:
[ 82.609389] <TASK>
[ 82.611136] skb_push.cold.109+0x10/0x10
[ 82.614289] __gre6_xmit+0x41e/0x590
[ 82.617169] ip6gre_tunnel_xmit+0x344/0x3f0
[ 82.620526] dev_hard_start_xmit+0xf1/0x330
[ 82.623882] sch_direct_xmit+0xe4/0x250
[ 82.626961] __dev_queue_xmit+0x720/0xfe0
<...>
[ 82.633431] packet_sendmsg+0x96a/0x1cb0
[ 82.636568] sock_sendmsg+0x30/0x40
<...>
The following sequence of events caused the BUG:
1. During ip6gretap device initialization, tunnel->tun_hlen (e.g. 4) is
calculated based on old flags (see ip6gre_calc_hlen());
2. packet_snd() reserves header room for skb A, assuming
tunnel->tun_hlen is 4;
3. Later (in clsact Qdisc), the eBPF program sets a new tunnel key for
skb A using bpf_skb_set_tunnel_key() (see _ip6gretap_set_tunnel());
4. __gre6_xmit() detects the new tunnel key, and recalculates
"tun_hlen" (e.g. 12) based on new flags (e.g. TUNNEL_KEY and
TUNNEL_SEQ);
5. gre_build_header() calls skb_push() with insufficient reserved header
room, triggering the BUG.
As sugguested by Cong, fix it by moving the call to skb_cow_head() after
the recalculation of tun_hlen.
Reproducer:
OBJ=$LINUX/tools/testing/selftests/bpf/test_tunnel_kern.o
ip netns add at_ns0
ip link add veth0 type veth peer name veth1
ip link set veth0 netns at_ns0
ip netns exec at_ns0 ip addr add 172.16.1.100/24 dev veth0
ip netns exec at_ns0 ip link set dev veth0 up
ip link set dev veth1 up mtu 1500
ip addr add dev veth1 172.16.1.200/24
ip netns exec at_ns0 ip addr add ::11/96 dev veth0
ip netns exec at_ns0 ip link set dev veth0 up
ip addr add dev veth1 ::22/96
ip link set dev veth1 up
ip netns exec at_ns0 \
ip link add dev ip6gretap00 type ip6gretap seq flowlabel 0xbcdef key 2 \
local ::11 remote ::22
ip netns exec at_ns0 ip addr add dev ip6gretap00 10.1.1.100/24
ip netns exec at_ns0 ip addr add dev ip6gretap00 fc80::100/96
ip netns exec at_ns0 ip link set dev ip6gretap00 up
ip link add dev ip6gretap11 type ip6gretap external
ip addr add dev ip6gretap11 10.1.1.200/24
ip addr add dev ip6gretap11 fc80::200/24
ip link set dev ip6gretap11 up
tc qdisc add dev ip6gretap11 clsact
tc filter add dev ip6gretap11 egress bpf da obj $OBJ sec ip6gretap_set_tunnel
tc filter add dev ip6gretap11 ingress bpf da obj $OBJ sec ip6gretap_get_tunnel
ping6 -c 3 -w 10 -q ::11
Fixes: 6712abc168eb ("ip6_gre: add ip6 gre and gretap collect_md mode")
Reported-by: Feng Zhou <[email protected]>
Co-developed-by: Cong Wang <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: Peilin Ye <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Do not update tunnel->tun_hlen in data plane code. Use a local variable
instead, just like "tunnel_hlen" in net/ipv4/ip_gre.c:gre_fb_xmit().
Co-developed-by: Cong Wang <[email protected]>
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: Peilin Ye <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2022-04-14
This series contains updates to ice driver only.
Maciej adjusts implementation in __ice_alloc_rx_bufs_zc() for when
ice_fill_rx_descs() does not return the entire buffer request and fixes a
return value for !CONFIG_NET_SWITCHDEV configuration which was preventing
VF creation.
Wojciech prevents eswitch transmit when VFs are being removed which was
causing NULL pointer dereference.
Jianglei Nie fixes a memory leak on error path of getting OROM data.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec
Steffen Klassert says:
====================
pull request (net): ipsec 2022-04-14
1) Fix the output interface for VRF cases in xfrm_dst_lookup.
From David Ahern.
2) Fix write out of bounds by doing COW on esp output when the
packet size is larger than a page.
From Sabrina Dubroca.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
packet_sock xmit could be dev_queue_xmit, which also returns negative
errors. So only checking positive errors is not enough, or userspace
sendmsg may return success while packet is not send out.
Move the net_xmit_errno() assignment in the braces as checkpatch.pl said
do not use assignment in if condition.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Reported-by: Flavio Leitner <[email protected]>
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Since commit e5d5aadcf3cd ("net/smc: fix sk_refcnt underflow on linkdown
and fallback"), for a fallback connection, __smc_release() does not call
sock_put() if its state is already SMC_CLOSED.
When calling smc_shutdown() after falling back, its state is set to
SMC_CLOSED but does not call sock_put(), so this patch calls it.
Reported-and-tested-by: [email protected]
Fixes: e5d5aadcf3cd ("net/smc: fix sk_refcnt underflow on linkdown and fallback")
Signed-off-by: Tony Lu <[email protected]>
Acked-by: Karsten Graul <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
A recent patch[1] from Eric Dumazet flipped the order in which the
keepalive timer and the keepalive worker were cancelled in order to fix a
syzbot reported issue[2]. Unfortunately, this enables the mirror image bug
whereby the timer races with rxrpc_exit_net(), restarting the worker after
it has been cancelled:
CPU 1 CPU 2
=============== =====================
if (rxnet->live)
<INTERRUPT>
rxnet->live = false;
cancel_work_sync(&rxnet->peer_keepalive_work);
rxrpc_queue_work(&rxnet->peer_keepalive_work);
del_timer_sync(&rxnet->peer_keepalive_timer);
Fix this by restoring the removed del_timer_sync() so that we try to remove
the timer twice. If the timer runs again, it should see ->live == false
and not restart the worker.
Fixes: 1946014ca3b1 ("rxrpc: fix a race in rxrpc_exit_net()")
Signed-off-by: David Howells <[email protected]>
cc: Eric Dumazet <[email protected]>
cc: Marc Dionne <[email protected]>
cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]/ [1]
Link: https://syzkaller.appspot.com/bug?extid=724378c4bb58f703b09a [2]
Reviewed-by: Eric Dumazet <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Added the phy_poll_cable_test flag for the lan937x phy driver.
Tested using command - ethtool --cable-test <dev>
Fixes: 680baca546f2 ("net: phy: added the LAN937x phy support")
Signed-off-by: Arun Ramadoss <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add HDMI codec VID for Intel Raptorlake-P platform.
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
With commit 13046370c4d1 ("ALSA: hda/hdmi: let new platforms assign the
pcm slot dynamically"), old behaviour to consider the HDA pin number,
when choosing PCM to assign, was dropped.
Build on this change and limit the number of PCMs created to number of
converters (= maximum number of concurrent display/receivers) when
"mst_no_extra_pcms" and "dyn_pcm_no_legacy" quirks are both set.
Fix the check in hdmi_find_pcm_slot() to ensure only spec->pcm_used
entries are considered in the search. Elsewhere in the driver
spec->pcm_used is already checked properly.
Doing this avoids following warning at SOF driver probe for multiple
machine drivers:
[ 112.425297] sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no
PCM in topology for HDMI converter 4
[ 112.425298] sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no
PCM in topology for HDMI converter 5
[ 112.425299] sof_sdw sof_sdw: hda_dsp_hdmi_build_controls: no
PCM in topology for HDMI converter 6
Fixes: 13046370c4d1 ("ALSA: hda/hdmi: let new platforms assign the pcm slot dynamically")
BugLink: https://github.com/thesofproject/linux/issues/2573
Signed-off-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
We observed: 'dmasound_setup' defined but not used error with
COMPILER=gcc ARCH=m68k DEFCONFIG=allmodconfig build.
Fix it by adding __maybe_unused to dmasound_setup.
Error(s):
sound/oss/dmasound/dmasound_core.c:1431:12: error: 'dmasound_setup' defined but not used [-Werror=unused-function]
Fixes: 9dd7c46346ca ("sound/oss/dmasound: fix build when drivers are mixed =y/=m")
Signed-off-by: Miles Chen <[email protected]>
Acked-by: Randy Dunlap <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
Qemu unconditionally reports a UUID, which depending on the qemu version
is either all-null (which is incorrect but harmless) or contains a single
bit set for all controllers. In addition it can also optionally report
a eui64 which needs to be manually set. Disable namespace identifiers
for Qemu controlles entirely even if in some cases they could be set
correctly through manual intervention.
Reported-by: Luis Chamberlain <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
|
|
The MAXIO MAP1002/1202 controllers reports completely bogus Namespace
identifiers that even change after suspend cycles. Disable using
the Identifiers entirely.
Reported-by: 金韬 <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Tested-by: 金韬 <[email protected]>
|
|
Add a quirk to disable using and exporting namespace identifiers for
controllers where they are broken beyond repair.
The most directly visible problem with non-unique namespace identifiers
is that they break the /dev/disk/by-id/ links, with the link for a
supposedly unique identifier now pointing to one of multiple possible
namespaces that share the same ID, and a somewhat random selection of
which one actually shows up.
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
|
|
Use the RQF_QUIET flag to skip the newly added verbose error reporting,
and set the flag in __nvme_submit_sync_cmd, which is used for most
internal passthrough requests where we do expect errors (e.g. due to
probing for optional functionality). This is similar to what the SCSI
verbose error logging does.
Signed-off-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Alan Adamson <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Tested-by: Alan Adamson <[email protected]>
Tested-by: Yi Zhang <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
|
|
If we (re-)calculate the file system overhead amount and it's
different from the on-disk s_overhead_clusters value, update the
on-disk version since this can take potentially quite a while on
bigalloc file systems.
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
|
|
We need to either restore creds properly if we fail on the file
assignment, or just do the file assignment first instead. Let's do
the latter as it's simpler, should make no difference here for
file assignment.
Link: https://lore.kernel.org/lkml/[email protected]/
Reported-by: [email protected]
Fixes: 6bf9c47a3989 ("io_uring: defer file assignment")
Signed-off-by: Jens Axboe <[email protected]>
|
|
If the file system does not use bigalloc, calculating the overhead is
cheap, so force the recalculation of the overhead so we don't have to
trust the precalculated overhead in the superblock.
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
|
|
Currently ksmbd is using ->f_bsize from vfs_statfs() as sector size.
If fat/exfat is a local share, ->f_bsize is a cluster size that is too
large to be used as a sector size. Sector sizes larger than 4K cause
problem occurs when mounting an iso file through windows client.
The error message can be obtained using Mount-DiskImage command,
the error is:
"Mount-DiskImage : The sector size of the physical disk on which the
virtual disk resides is not supported."
This patch reports fixed 4KB sector size if ->s_blocksize is bigger
than 4KB.
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Add missing increment reference count of parent fp in
ksmbd_lookup_fd_inode().
Signed-off-by: Namjae Jeon <[email protected]>
Reviewed-by: Hyunchul Lee <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
If the filename is change by underlying rename the server, fp->filename
and real filename can be different. This patch remove the uses of
fp->filename in ksmbd and replace it with d_path().
Signed-off-by: Namjae Jeon <[email protected]>
Reviewed-by: Hyunchul Lee <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
The kernel calculation was underestimating the overhead by not taking
into account the reserved gdt blocks. With this change, the overhead
calculated by the kernel matches the overhead calculation in mke2fs.
Signed-off-by: Theodore Ts'o <[email protected]>
Cc: [email protected]
|
|
The intent behind commit e6fc9f62ce6e ("dm: flag clones created by
__send_duplicate_bios") was to formally disallow the use of
dm_accept_partial_bio() where it simply isn't possible -- due to
constraint that multiple bios cannot meaningfully update a shared
tio->len_ptr.
But that commit went too far and disallowed the case where "abormal"
IO (e.g. WRITE_ZEROES) is only using a single bio. Fix this by
not marking a dm_io with a single dm_target_io (and bio), that happens
to be created by __send_duplicate_bios, as DM_TIO_IS_DUPLICATE_BIO.
Also remove 'unsigned *len' parameter from alloc_multiple_bios().
This commit fixes a dm_accept_partial_bio() BUG_ON() with dm-zoned
when a WRITE_ZEROES bio is issued.
Fixes: 655f3aad7aa4 ("dm: switch dm_target_io booleans over to proper flags")
Reported-by: Shinichiro Kawasaki <[email protected]>
Reviewed-by: Damien Le Moal <[email protected]>
Signed-off-by: Mike Snitzer <[email protected]>
|
|
Pull drm fixes from Dave Airlie:
"Eggs season holidays are among us, and I think I'd expect some smaller
pulls for two weeks then.
This seems eerily quiet. One i915 fix, amdgpu has a bunch and msm. I
didn't see a misc pull this week, so I expect that will catch up next
week.
i915:
- Correct legacy mmap disabling to use GRAPHICS_VER_FULL
msm:
- system suspend fix
- kzalloc return checks
- misc display fix
- iommu_present removal
amdgpu:
- Fix for alpha properly in pre-multiplied mode
- Fix VCN 3.1.2 firmware name
- Suspend/resume fix
- Add a gfxoff quirk for Mac vega20 board
- DCN 3.1.6 spread spectrum fix"
* tag 'drm-fixes-2022-04-15' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: remove dtbclk_ss compensation for dcn316
drm/amdgpu: Enable gfxoff quirk on MacBook Pro
drm/amdgpu: Ensure HDA function is suspended before ASIC reset
drm/amdgpu: fix VCN 3.1.2 firmware name
drm/amd/display: don't ignore alpha property on pre-multiplied mode
drm/msm/gpu: Avoid -Wunused-function with !CONFIG_PM_SLEEP
drm/msm/dp: add fail safe mode outside of event_mutex context
drm/msm/dsi: Use connector directly in msm_dsi_manager_connector_init()
drm/msm: Stop using iommu_present()
drm/msm/mdp5: check the return of kzalloc()
drm/msm: Fix range size vs end confusion
drm/i915: Sunset igpu legacy mmap support based on GRAPHICS_VER_FULL
drm/msm/dpu: Use indexed array initializer to prevent mismatches
drm/msm/disp: check the return value of kzalloc()
dt-bindings: display/msm: another fix for the dpu-qcm2290 example
drm/msm: Add missing put_task_struct() in debugfs path
drm/msm/gpu: Remove mutex from wait_event condition
drm/msm/gpu: Park scheduler threads for system suspend
drm/msm/gpu: Rename runtime suspend/resume functions
|
|
Pull vfio fix from Alex Williamson:
- Fix VF token checking for vfio-pci variant drivers (Jason Gunthorpe)
* tag 'vfio-v5.18-rc3' of https://github.com/awilliam/linux-vfio:
vfio/pci: Fix vf_token mechanism when device-specific VF drivers are used
|
|
Pull cifs fixes from Steve French:
- two fixes related to unmount
- symlink overflow fix
- minor netfs fix
- improved tracing for crediting (flow control)
* tag '5.18-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: verify that tcon is valid before dereference in cifs_kill_sb
cifs: potential buffer overflow in handling symlinks
cifs: Split the smb3_add_credits tracepoint
cifs: release cached dentries only if mount is complete
cifs: Check the IOCB_DIRECT flag, not O_DIRECT
|
|
When asked to create a path ending '/', but which is not to be a
directory (LOOKUP_DIRECTORY not set), filename_create() will never try
to create the file. If it doesn't exist, -ENOENT is reported.
However, it still passes LOOKUP_CREATE|LOOKUP_EXCL to the filesystems
->lookup() function, even though there is no intent to create. This is
misleading and can cause incorrect behaviour.
If you try
ln -s foo /path/dir/
where 'dir' is a directory on an NFS filesystem which is not currently
known in the dcache, this will fail with ENOENT.
But as the name is not in the dcache, nfs_lookup gets called with
LOOKUP_CREATE|LOOKUP_EXCL and so it returns NULL without performing any
lookup, with the expectation that a subsequent call to create the target
will be made, and the lookup can be combined with the creation. In the
case with a trailing '/' and no LOOKUP_DIRECTORY, that call is never
made. Instead filename_create() sees that the dentry is not (yet)
positive and returns -ENOENT - even though the directory actually
exists.
So only set LOOKUP_CREATE|LOOKUP_EXCL if there really is an intent to
create, and use the absence of these flags to decide if -ENOENT should
be returned.
Note that filename_parentat() is only interested in LOOKUP_REVAL, so we
split that out and store it in 'reval_flag'. __lookup_hash() then gets
reval_flag combined with whatever create flags were determined to be
needed.
Reviewed-by: David Disseldorp <[email protected]>
Reviewed-by: Jeff Layton <[email protected]>
Signed-off-by: NeilBrown <[email protected]>
Cc: Al Viro <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.18-2022-04-13:
amdgpu:
- Fix for alpha properly in pre-multiplied mode
- Fix VCN 3.1.2 firmware name
- Suspend/resume fix
- Add a gfxoff quirk for Mac vega20 board
- DCN 3.1.6 spread spectrum fix
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
It's not good practice to define multiple types for the same property, so
factor out the type reference making the properties always an uint32-array
with a length of 1 or 3 items.
Signed-off-by: Rob Herring <[email protected]>
Reviewed-by: Sam Ravnborg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The Gemini defconfig needs to be updated due to DSA driver
Kconfig changes in the v5.18 merge window:
CONFIG_NET_DSA_REALTEK_SMI is now behind
CONFIG_NET_DSA_REALTEK and the desired DSA switch need
to be selected explicitly with
CONFIG_NET_DSA_REALTEK_RTL8366RB.
Take this opportunity to update some other minor config
options:
- CONFIG_MARVELL_PHY moved around because of Kconfig
changes.
- CONFIG_SENSORS_DRIVETEMP should be selected since is
regulates the system critical alert temperature on
some devices, which is nice if it is handled even
if initramfs or root fails to mount.
Fixes: 319a70a5fea9 ("net: dsa: realtek-smi: move to subdirectory")
Fixes: 765c39a4fafe ("net: dsa: realtek: convert subdrivers into modules")
Signed-off-by: Linus Walleij <[email protected]>
Cc: Hans Ulli Kroll <[email protected]>
Cc: Luiz Angelo Daros de Luca <[email protected]>
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Boolean properties in DT are present or not present and don't take a value.
A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't
matter.
It may have been intended that 0 values are false, but there is no change
in behavior with this patch.
Signed-off-by: Rob Herring <[email protected]>
Cc: Andy Gross <[email protected]>
Cc: Bjorn Andersson <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]'
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
The node names should be generic and SPI NOR dtschema expects "flash".
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Link: https://lore.kernel.org/r/[email protected]'
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
Boolean properties in DT are present or not present and don't take a value.
A property such as 'foo = <0>;' evaluated to true. IOW, the value doesn't
matter.
It may have been intended that 0 values are false, but there is no change
in behavior with this patch.
Signed-off-by: Rob Herring <[email protected]>
Reviewed-by: Claudiu Beznea <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Nicolas Ferre <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Cc: Claudiu Beznea <[email protected]>
Cc: Shawn Guo <[email protected]>
Cc: Sascha Hauer <[email protected]>
Cc: Pengutronix Kernel Team <[email protected]>
Cc: Fabio Estevam <[email protected]>
Cc: NXP Linux Team <[email protected]>
Cc: "Benoît Cousson" <[email protected]>
Cc: Tony Lindgren <[email protected]>
Cc: Andy Gross <[email protected]>
Cc: Bjorn Andersson <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]'
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into arm/fixes
Defconfig updates for kernel v5.18:
- Refresh defconfig with new and moved options
- Add some new hardware drivers
- Activate battery charging
* tag 'ux500-defconfig-soc-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: config: u8500: Re-enable AB8500 battery charging
ARM: config: u8500: Add some common hardware
ARM: config: Refresh U8500 defconfig
Link: https://lore.kernel.org/r/CACRpkdY+_Go4XNzOh+Rvc24QBnUud2k-S7VQuaH5d-j71_dJog@mail.gmail.com
Signed-off-by: Arnd Bergmann <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull s390 fixes from Heiko Carstens:
- Convert current_stack_pointer to a register alias like it is assumed
if ARCH_HAS_CURRENT_STACK_POINTER is selected. The existing
implementation as a function breaks CONFIG_HARDENED_USERCOPY
sanity-checks
- Get rid of -Warray-bounds warning within kexec code
- Add minimal IBM z16 support by reporting a proper elf platform, and
adding compile options
- Update defconfigs
* tag 's390-5.18-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390: enable CONFIG_HARDENED_USERCOPY in debug_defconfig
s390: current_stack_pointer shouldn't be a function
s390: update defconfigs
s390/kexec: silence -Warray-bounds warning
s390: allow to compile with z16 optimizations
s390: add z16 elf platform
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Paolo Abeni:
"Including fixes from wireless and netfilter.
Current release - regressions:
- smc: fix af_ops of child socket pointing to released memory
- wifi: ath9k: fix usage of driver-private space in tx_info
Previous releases - regressions:
- ipv6: fix panic when forwarding a pkt with no in6 dev
- sctp: use the correct skb for security_sctp_assoc_request
- smc: fix NULL pointer dereference in smc_pnet_find_ib()
- sched: fix initialization order when updating chain 0 head
- phy: don't defer probe forever if PHY IRQ provider is missing
- dsa: revert "net: dsa: setup master before ports"
- dsa: felix: fix tagging protocol changes with multiple CPU ports
- eth: ice:
- fix use-after-free when freeing @rx_cpu_rmap
- revert "iavf: fix deadlock occurrence during resetting VF
interface"
- eth: lan966x: stop processing the MAC entry is port is wrong
Previous releases - always broken:
- sched:
- flower: fix parsing of ethertype following VLAN header
- taprio: check if socket flags are valid
- nfc: add flush_workqueue to prevent uaf
- veth: ensure eth header is in skb's linear part
- eth: stmmac: fix altr_tse_pcs function when using a fixed-link
- eth: macb: restart tx only if queue pointer is lagging
- eth: macvlan: fix leaking skb in source mode with nodst option"
* tag 'net-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (52 commits)
net: bcmgenet: Revert "Use stronger register read/writes to assure ordering"
rtnetlink: Fix handling of disabled L3 stats in RTM_GETSTATS replies
net: dsa: felix: fix tagging protocol changes with multiple CPU ports
tun: annotate access to queue->trans_start
nfc: nci: add flush_workqueue to prevent uaf
net: dsa: realtek: don't parse compatible string for RTL8366S
net: dsa: realtek: fix Kconfig to assure consistent driver linkage
net: ftgmac100: access hardware register after clock ready
Revert "net: dsa: setup master before ports"
macvlan: Fix leaking skb in source mode with nodst option
netfilter: nf_tables: nft_parse_register can return a negative value
net: lan966x: Stop processing the MAC entry is port is wrong.
net: lan966x: Fix when a port's upper is changed.
net: lan966x: Fix IGMP snooping when frames have vlan tag
net: lan966x: Update lan966x_ptp_get_nominal_value
sctp: Initialize daddr on peeled off socket
net/smc: Fix af_ops of child socket pointing to released memory
net/smc: Fix NULL pointer dereference in smc_pnet_find_ib()
net/smc: use memcpy instead of snprintf to avoid out of bounds read
net: macb: Restart tx only if queue pointer is lagging
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"This became an unexpectedly large pull request due to various
regression fixes in the previous kernels.
The majority of fixes are a series of patches to address the
regression at probe errors in devres'ed drivers, while there are yet
more fixes for the x86 SG allocations and for USB-audio buffer
management. In addition, a few HD-audio quirks and other small fixes
are found"
* tag 'sound-5.18-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (52 commits)
ALSA: usb-audio: Limit max buffer and period sizes per time
ALSA: memalloc: Add fallback SG-buffer allocations for x86
ALSA: nm256: Don't call card private_free at probe error path
ALSA: mtpav: Don't call card private_free at probe error path
ALSA: rme9652: Fix the missing snd_card_free() call at probe error
ALSA: hdspm: Fix the missing snd_card_free() call at probe error
ALSA: hdsp: Fix the missing snd_card_free() call at probe error
ALSA: oxygen: Fix the missing snd_card_free() call at probe error
ALSA: lx6464es: Fix the missing snd_card_free() call at probe error
ALSA: cmipci: Fix the missing snd_card_free() call at probe error
ALSA: aw2: Fix the missing snd_card_free() call at probe error
ALSA: als300: Fix the missing snd_card_free() call at probe error
ALSA: lola: Fix the missing snd_card_free() call at probe error
ALSA: bt87x: Fix the missing snd_card_free() call at probe error
ALSA: sis7019: Fix the missing error handling
ALSA: intel_hdmi: Fix the missing snd_card_free() call at probe error
ALSA: via82xx: Fix the missing snd_card_free() call at probe error
ALSA: sonicvibes: Fix the missing snd_card_free() call at probe error
ALSA: rme96: Fix the missing snd_card_free() call at probe error
ALSA: rme32: Fix the missing snd_card_free() call at probe error
...
|
|
Scalar properties shouldn't have array constraints (minItems, maxItems,
items). These constraints can simply be dropped with any constraints under
'items' moved up a level.
Cc: Agathe Porte <[email protected]>
Cc: Guenter Roeck <[email protected]>
Cc: Jean Delvare <[email protected]>
Cc: Krzysztof Kozlowski <[email protected]>
Cc: Olivier Moysan <[email protected]>
Cc: Arnaud Pouliquen <[email protected]>
Cc: Jonathan Cameron <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: Philipp Zabel <[email protected]>
Cc: Mauro Carvalho Chehab <[email protected]>
Cc: Bjorn Andersson <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Fabrice Gasnier <[email protected]>
Cc: Yunfei Dong <[email protected]>
Cc: Geert Uytterhoeven <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]>
Acked-by: Mark Brown <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Acked-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more code and warning fixes.
There's one feature ioctl removal patch slated for 5.18 that did not
make it to the main pull request. It's just a one-liner and the ioctl
has a v2 that's in use for a long time, no point to postpone it to
5.19.
Late update:
- remove balance v1 ioctl, superseded by v2 in 2012
Fixes:
- add back cgroup attribution for compressed writes
- add super block write start/end annotations to asynchronous balance
- fix root reference count on an error handling path
- in zoned mode, activate zone at the chunk allocation time to avoid
ENOSPC due to timing issues
- fix delayed allocation accounting for direct IO
Warning fixes:
- simplify assertion condition in zoned check
- remove an unused variable"
* tag 'for-5.18-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix btrfs_submit_compressed_write cgroup attribution
btrfs: fix root ref counts in error handling in btrfs_get_root_ref
btrfs: zoned: activate block group only for extent allocation
btrfs: return allocated block group from do_chunk_alloc()
btrfs: mark resumed async balance as writing
btrfs: remove support of balance v1 ioctl
btrfs: release correct delalloc amount in direct IO write path
btrfs: remove unused variable in btrfs_{start,write}_dirty_block_groups()
btrfs: zoned: remove redundant condition in btrfs_run_delalloc_range
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull fscache fixes from David Howells:
"Here's a collection of fscache and cachefiles fixes and misc small
cleanups. The two main fixes are:
- Add a missing unmark of the inode in-use mark in an error path.
- Fix a KASAN slab-out-of-bounds error when setting the xattr on a
cachefiles volume due to the wrong length being given to memcpy().
In addition, there's the removal of an unused parameter, removal of an
unused Kconfig option, conditionalising a bit of procfs-related stuff
and some doc fixes"
* tag 'fscache-fixes-20220413' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
fscache: remove FSCACHE_OLD_API Kconfig option
fscache: Use wrapper fscache_set_cache_state() directly when relinquishing
fscache: Move fscache_cookies_seq_ops specific code under CONFIG_PROC_FS
fscache: Remove the cookie parameter from fscache_clear_page_bits()
docs: filesystems: caching/backend-api.rst: fix an object withdrawn API
docs: filesystems: caching/backend-api.rst: correct two relinquish APIs use
cachefiles: Fix KASAN slab-out-of-bounds in cachefiles_set_volume_xattr
cachefiles: unmark inode in use in error path
|
|
When poll request is timed out, it is removed from the poll list,
but not completed, so the request is leaked, and never get chance
to complete.
Fix the issue by ending it in timeout handler.
Fixes: 0a593fbbc245 ("null_blk: poll queue support")
Signed-off-by: Ming Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Unit of bio->bi_iter.bi_size is bytes, but unit of offset/size
is sector.
Fix the above issue in checking offset/size in bio_trim().
Fixes: e83502ca5f1e ("block: fix argument type of bio_trim()")
Cc: Chaitanya Kulkarni <[email protected]>
Signed-off-by: Ming Lei <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
A memory chunk was allocated for orom_data in ice_get_orom_civd_data()
by vzmalloc(). But when ice_read_flash_module() fails, the allocated
memory is not freed, which will lead to a memory leak.
We can fix it by freeing the orom_data when ce_read_flash_module() fails.
Fixes: af18d8866c80 ("ice: reduce time to read Option ROM CIVD data")
Signed-off-by: Jianglei Nie <[email protected]>
Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Below steps end up with crash:
- modprobe ice
- devlink dev eswitch set $PF1_PCI mode switchdev
- echo 64 > /sys/class/net/$PF1/device/sriov_numvfs
- rmmod ice
Calling ice_eswitch_port_start_xmit while the process of removing
VFs is in progress ends up with NULL pointer dereference.
That's because PR netdev is not released but some resources
are already freed. Fix it by checking if ICE_VF_DIS bit is set.
Call trace:
[ 1379.595146] BUG: kernel NULL pointer dereference, address: 0000000000000040
[ 1379.595284] #PF: supervisor read access in kernel mode
[ 1379.595410] #PF: error_code(0x0000) - not-present page
[ 1379.595535] PGD 0 P4D 0
[ 1379.595657] Oops: 0000 [#1] PREEMPT SMP PTI
[ 1379.595783] CPU: 4 PID: 974 Comm: NetworkManager Kdump: loaded Tainted: G OE 5.17.0-rc8_mrq_dev-queue+ #12
[ 1379.595926] Hardware name: Intel Corporation S1200SP/S1200SP, BIOS S1200SP.86B.03.01.0042.013020190050 01/30/2019
[ 1379.596063] RIP: 0010:ice_eswitch_port_start_xmit+0x46/0xd0 [ice]
[ 1379.596292] Code: c7 c8 09 00 00 e8 9a c9 fc ff 84 c0 0f 85 82 00 00 00 4c 89 e7 e8 ca 70 fe ff 48 8b 7d 58 48 89 c3 48 85 ff 75 5e 48 8b 53 20 <8b> 42 40 85 c0 74 78 8d 48 01 f0 0f b1 4a 40 75 f2 0f b6 95 84 00
[ 1379.596456] RSP: 0018:ffffaba0c0d7bad0 EFLAGS: 00010246
[ 1379.596584] RAX: ffff969c14c71680 RBX: ffff969c14c71680 RCX: 000100107a0f0000
[ 1379.596715] RDX: 0000000000000000 RSI: ffff969b9d631000 RDI: 0000000000000000
[ 1379.596846] RBP: ffff969c07b46500 R08: ffff969becfca8ac R09: 0000000000000001
[ 1379.596977] R10: 0000000000000004 R11: ffffaba0c0d7bbec R12: ffff969b9d631000
[ 1379.597106] R13: ffffffffc08357a0 R14: ffff969c07b46500 R15: ffff969b9d631000
[ 1379.597237] FS: 00007f72c0e25c80(0000) GS:ffff969f13500000(0000) knlGS:0000000000000000
[ 1379.597414] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 1379.597562] CR2: 0000000000000040 CR3: 000000012b316006 CR4: 00000000003706e0
[ 1379.597713] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1379.597863] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 1379.598015] Call Trace:
[ 1379.598153] <TASK>
[ 1379.598294] dev_hard_start_xmit+0xd9/0x220
[ 1379.598444] sch_direct_xmit+0x8a/0x340
[ 1379.598592] __dev_queue_xmit+0xa3c/0xd30
[ 1379.598739] ? packet_parse_headers+0xb4/0xf0
[ 1379.598890] packet_sendmsg+0xa15/0x1620
[ 1379.599038] ? __check_object_size+0x46/0x140
[ 1379.599186] sock_sendmsg+0x5e/0x60
[ 1379.599330] ____sys_sendmsg+0x22c/0x270
[ 1379.599474] ? import_iovec+0x17/0x20
[ 1379.599622] ? sendmsg_copy_msghdr+0x59/0x90
[ 1379.599771] ___sys_sendmsg+0x81/0xc0
[ 1379.599917] ? __pollwait+0xd0/0xd0
[ 1379.600061] ? preempt_count_add+0x68/0xa0
[ 1379.600210] ? _raw_write_lock_irq+0x1a/0x40
[ 1379.600369] ? ep_done_scan+0xc9/0x110
[ 1379.600494] ? _raw_spin_unlock_irqrestore+0x25/0x40
[ 1379.600622] ? preempt_count_add+0x68/0xa0
[ 1379.600747] ? _raw_spin_lock_irq+0x1a/0x40
[ 1379.600899] ? __fget_light+0x8f/0x110
[ 1379.601024] __sys_sendmsg+0x49/0x80
[ 1379.601148] ? release_ds_buffers+0x50/0xe0
[ 1379.601274] do_syscall_64+0x3b/0x90
[ 1379.601399] entry_SYSCALL_64_after_hwframe+0x44/0xae
[ 1379.601525] RIP: 0033:0x7f72c1e2e35d
Fixes: f5396b8a663f ("ice: switchdev slow path")
Signed-off-by: Wojciech Drewek <[email protected]>
Reported-by: Marcin Szycik <[email protected]>
Reviewed-by: Michal Swiatkowski <[email protected]>
Tested-by: Sandeep Penigalapati <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Currently for !CONFIG_NET_SWITCHDEV kernel builds it is not possible to
create VFs properly as call to ice_eswitch_configure() returns
-EOPNOTSUPP for us. This is because CONFIG_ICE_SWITCHDEV depends on
CONFIG_NET_SWITCHDEV.
Change the ice_eswitch_configure() implementation for
!CONFIG_ICE_SWITCHDEV to return 0 instead -EOPNOTSUPP and let
ice_ena_vfs() finish its work properly.
CC: Grzegorz Nitka <[email protected]>
Fixes: 1a1c40df2e80 ("ice: set and release switchdev environment")
Signed-off-by: Maciej Fijalkowski <[email protected]>
Signed-off-by: Michal Swiatkowski <[email protected]>
Tested-by: Konrad Jankowski <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|