aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-07-30bonding: prevent sysfs from allowing arp monitoring with alb/tlbAndy Gospodarek1-12/+25
When using module options arp monitoring and balance-alb/balance-tlb are mutually exclusive options. Anytime balance-alb/balance-tlb are enabled mii monitoring is forced to 100ms if not set. When configuring via sysfs no checking is currently done. Handling these cases with sysfs has to be done a bit differently because we do not have all configuration information available at once. This patch will not allow a mode change to balance-alb/balance-tlb if arp_interval is already non-zero. It will also not allow the user to set a non-zero arp_interval value if the mode is already set to balance-alb/balance-tlb. They are still mutually exclusive on a first-come, first serve basis. Tested with initscripts on Fedora and manual setting via sysfs. Signed-off-by: Andy Gospodarek <gospo@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-30drivers/net/vxge/vxge-main.c: Use pr_<level> and netdev_<level>Joe Perches1-16/+11
Use pr_fmt, pr_<level> and netdev_<level> where appropriate. Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Jon Mason <jon.mason@exar.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-30net: ks8842 depends on DMA_ENGINERandy Dunlap1-1/+1
ks8842 uses dma channel functions, so it should depend on DMA_ENGINE. ERROR: "__dma_request_channel" [drivers/net/ks8842.ko] undefined! ERROR: "dma_release_channel" [drivers/net/ks8842.ko] undefined! Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-30ucc_geth: fix UCC device number in debug messageSergey Matyukevich1-1/+1
This patch contains a fix for UCC device number in verbose debug message. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-30tun: keep link (carrier) state up to dateNolan Leake1-7/+3
Currently, only ethtool can get accurate link state of a tap device. With this patch, IFF_RUNNING and IF_OPER_UP/DOWN are kept up to date as well. Signed-off-by: Nolan Leake <nolan@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-29Merge branch 'master' of ↵John W. Linville145-2826/+3858
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 into for-davem
2010-07-29cfg80211: fix dev <-> wiphy typoChristian Lamparter1-1/+1
Cc: Joe Perches <joe@perches.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29mac80211: allow drivers to request DTIM periodJohannes Berg5-5/+84
Some features require knowing the DTIM period before associating. This implements the ability to wait for a beacon in mac80211 before assoc to provide this value. It is optional since most likely not all drivers will need this. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29iwlwifi: fix scan abortStanislaw Gruszka1-10/+8
Fix possible double priv->mutex lock introduced by commit a69b03e941abae00380fc6bc1877fb797a1b31e6 "iwlwifi: cancel scan watchdog in iwl_bg_abort_scan" . We can not call cancel_delayed_work_sync(&priv->scan_check) with priv->mutex locked because workqueue function iwl_bg_scan_check() take that lock internally. We do not need to synchronize when canceling priv->scan_check work. We can avoid races (sending double abort command or send no command at all) using STATUS_SCAN_ABORT bit. Moreover current iwl_bg_scan_check() code seems to be broken, as we should not send abort commands when currently aborting. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> CC: stable@kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29mwl8k: change maintenance statusLennert Buytenhek1-1/+1
The 8366 AP support in particular is still rather incomplete, but this is unlikely to be addressed any time soon. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29wl1271: update hw/fw version info in wiphy structJohn W. Linville1-0/+7
This makes the information available through ethtool... Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
2010-07-29wl1251: update hw/fw version info in wiphy structJohn W. Linville1-0/+5
This makes the information available through ethtool... Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Kalle Valo <kvalo@adurom.com>
2010-07-29wl1271: add get_survey callback in order to get channel noiseJohn W. Linville3-0/+27
Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Juuso Oikarinen <juuso.oikarinen@nokia.com>
2010-07-29libertas_tf: add get_survey callback in order to get channel noiseJohn W. Linville2-0/+21
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-29wl1251: add get_survey callback in order to get channel noiseJohn W. Linville3-0/+26
Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Kalle Valo <kvalo@adurom.com>
2010-07-29ar9170: add get_survey callback in order to get channel noiseJohn W. Linville1-0/+19
Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Christian Lamparter <chunkeey@googlemail.com>
2010-07-29mwl8k: add get_survey callback in order to get channel noiseJohn W. Linville1-4/+27
Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Lennert Buytenhek <buytenh@wantstofly.org>
2010-07-29ath9k: enable serialize_regmode for non-PCIE AR9160John W. Linville1-1/+2
https://bugzilla.kernel.org/show_bug.cgi?id=16476 Signed-off-by: John W. Linville <linville@tuxdriver.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: stable@kernel.org
2010-07-28net: bnx2x_cmn.c needs net/ip6_checksum.h for csum_ipv6_magicStephen Rothwell1-0/+1
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-28mac80211: inform drivers about the off-channel status on channel changesFelix Fietkau2-0/+6
For some drivers it can be useful to know whether the channel they're supposed to switch to is going to be used for short off-channel work or scanning, or whether the hardware is expected to stay on it for a while longer. This is important for various kinds of calibration work, which takes longer to complete and should keep some persistent state, even if the channel temporarily changes. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-28Revert "mac80211: fix sw scan bracketing"Luis R. Rodriguez1-2/+2
This reverts this commit. While in theory the change is correct the patch does not address current assumptions made by some drivers, one which is definitley affected is ath9k. Prior to this change the scan complete callback would be called after we returned to the home channel and configured the hardware RX filters. After this change we call the scan complete callback prior to both the hw config and the config filter. At least for ath9k this breaks quite a few assumptions on the callback, leading to disconnects to the AP after every scan making the driver pretty useless on STA mode. The goal behind this commit was to address the now understood spurious warnings from ath9k and mac80211_hwsim on scanning on two wiphys at the same time but we have now supressed these and will address this issue in the next kernel release. When fixing this for good next we must first review the other driver's dependence on this logic and perhaps consider removal of the scan complete callback all together. Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-28ath9k: remove the two wiphys scanning at the same time messageLuis R. Rodriguez1-4/+9
When issuing two consecutive scans you could often end up getting in the logs: "ath9k: Two wiphys trying to scan at the same time" This message is due to a race in mac80211 but addressing that race requires some more major changes on the driver and perhaps optimizations on mac80211 like removing the scan complete callback alltogether. Its too late to address this this kernel release so supress the complaint and annotate this needs fixing for later. Cc: Johannes Berg <johannes.berg@intel.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-28cfg80211: Update of regulatory request initiator handlingYuri Ershov1-1/+2
In some cases there could be possible dereferencing freed pointer. The update is intended to avoid this issue. Signed-off-by: Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-28nl80211: Fix memory leaksYuri Ershov1-0/+2
In case of errors during message composing msg should be freed after canceling. Signed-off-by: Yuri Kululin <ext-yuri.kululin@nokia.com> Signed-off-by: Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-28mac80211: Put some code under MESH macroYuri Ershov1-0/+2
In the function ieee80211_subif_start_xmit the logic related with meshdrlen is under CONFIG_MAC80211_MESH macro, but in one place it isn't. This is some update for this Signed-off-by: Yuri Ershov <ext-yuri.ershov@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-28Merge branch 'master' of ↵John W. Linville10-137/+63
git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-next-2.6
2010-07-28vhost-net: mergeable buffers supportDavid Stevens3-18/+315
This adds support for mergeable buffers in vhost-net: this is needed for older guests without indirect buffer support, as well as for zero copy with some devices. Includes changes by Michael S. Tsirkin to make the patch as low risk as possible (i.e., close to no changes when feature is disabled). Signed-off-by: David Stevens <dlstevens@us.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2010-07-28vhost: apply cgroup to vhost workersMichael S. Tsirkin1-0/+6
Apply the cgroup of the owner task to the created vhost worker. Based on patches from Sridhar Samudrala's and Tejun Heo. Later we'll need to also apply cpumask and probably priority of the owner process. Discussion on the best way to do this is still ongoing. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Tejun Heo <tj@kernel.org> Cc: Sridhar Samudrala <samudrala.sridhar@gmail.com> Cc: Li Zefan <lizf@cn.fujitsu.com>
2010-07-28cgroups: Add an API to attach a task to current task's cgroupSridhar Samudrala2-0/+30
Add a new kernel API to attach a task to current task's cgroup in all the active hierarchies. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paul Menage <menage@google.com> Acked-by: Li Zefan <lizf@cn.fujitsu.com>
2010-07-28vhost: replace vhost_workqueue with per-vhost kthreadTejun Heo3-73/+164
Replace vhost_workqueue with per-vhost kthread. Other than callback argument change from struct work_struct * to struct vhost_work *, there's no visible change to vhost_poll_*() interface. This conversion is to make each vhost use a dedicated kthread so that resource control via cgroup can be applied. Partially based on Sridhar Samudrala's patch. * Updated to use sub structure vhost_work instead of directly using vhost_poll at Michael's suggestion. * Added flusher wake_up() optimization at Michael's suggestion. Changes by MST: * Converted atomics/barrier use to a spinlock. * Create thread on SET_OWNER * Fix flushing Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Cc: Sridhar Samudrala <samudrala.sridhar@gmail.com>
2010-07-27ks8842: Fix warnings on 64-bit.David S. Miller1-3/+3
drivers/net/ks8842.c:922:26: warning: cast from pointer to integer of different size drivers/net/ks8842.c:940:17: warning: cast to pointer from integer of different size drivers/net/ks8842.c:963:17: warning: cast to pointer from integer of different size Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27macvlan: Fix rx counters update in macvlan_handle_frame()Sridhar Samudrala1-4/+7
Fix macvlan_handle_frame() to update the rx counters based on the return value of the vlan->receive call. Updated the patch to not do any packet count drops when the interface is down based on Herber'ts comments. Signed-off-by: Sridhar Samudrala <sri@us.ibm.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27Merge branch 'master' of ↵David S. Miller19-32/+147
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x_main.c Merge bnx2x bug fixes in by hand... :-/ Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27ixgbe: potential null dereferenceDan Carpenter1-3/+4
The e_dev_err() macro dereferences "adapter" which is NULL here. Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27ks8842: Support DMA when accessed via timberdaleRichard Röjfors2-21/+447
This patch adds support for RX and TX DMA via the DMA API, this is only supported when the KS8842 is accessed via timberdale. There is no support for DMA on the generic bus interface it self, a state machine inside the FPGA is handling RX and TX transfers to/from buffers in the FPGA. The host CPU can do DMA to and from these buffers. The FPGA has to handle the RX interrupts, so these must be enabled in the ks8842 but not in the FPGA. The driver must not disable the RX interrupt that would mean that the data transfers into the FPGA buffers would stop. The host shall not enable TX interrupts since TX is handled by the FPGA, the host is notified by DMA callbacks when transfers are finished. Which DMA channels to use are added as parameters in the platform data struct. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27stmmac: fix automatic PAD/FCS strippingGiuseppe CAVALLARO4-4/+9
For Simple Ethernet frames (802.2 and 802.3) the GMAC Core never strips pad and fcs. This means the ACS has no effect on IPv4/6 frames. The FL bits, in the RDES0, include the FCS so the driver has to remove it in SW. For 802.3 frame format with LLC or LLC-SNAP, when set the ACS bit, the HW strips both PAD and FCS. The FL bits, in the RDES0, actually represents the frame length already stripped. This patch fixes this logic within the device driver that erroneously removed 4byte from 802.3 frames already stripped corrupting the payload. Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27stmmac: fix timer setup when use dual mac KconfigGiuseppe CAVALLARO1-1/+0
The driver erroneously sets the tmrate to zero when the TMU initialisation fails. This actually generates problems while using the dual GMAC configuration. With this patch, enabling both the dual gmac and the timer optimisation, the first interface opened will use the tmu channel 2, the second one won't be able to use the timer but will continue to work without mitigating the interrupts by using the external timer (i.e. TMU channel 2). Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: Update MAINTAINERS according to new locationDmitry Kravkov1-1/+1
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: update driver version to 1.52.53-3Dmitry Kravkov1-1/+1
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: Move statistics handling code to bnx2x_stats.*Dmitry Kravkov5-1594/+1647
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: Create separate file for ethtool routinesDmitry Kravkov4-1955/+1986
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: Create bnx2x_cmn.* filesDmitry Kravkov5-2600/+2943
Newly created files have no functionality changes, but includes some functionality from bnx2x_main.c which is common for PF and coming in the future VF driver. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: move global variable load_count to bnx2x.hDmitry Kravkov2-3/+9
This will allow access to this global variable (used in no-mcp mode) from different object files. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: store module parameters in driver main structureDmitry Kravkov2-3/+6
Store module parameters during initialization of main driver structure. This will allow access to the parameters from different files. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27bnx2x: Create separate folder for bnx2x driverDmitry Kravkov14-6/+12
This commit includes files movement to newly created folder using git-mv command and fixes references in cnic and bnx2x code to each other. files moved using following: #!/bin/bash mkdir drivers/net/bnx2x/ list=$(cd drivers/net/ && ls bnx2x*.[ch]) for f in $list; do git mv -f drivers/net/$f drivers/net/bnx2x/$f done Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27Bluetooth: Fix kfree() => kfree_skb() in hci_ath.cDan Carpenter1-1/+1
sk_buffs have to be freed with kfree_skb() instead of kfree(). Signed-off-by: Dan Carpenter <error27@gmail.com> Acked-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-27igbvf, ixgbevf: use dev_hw_addr_randomStefan Assmann2-2/+2
Both igbvf and ixgbevf should set addr_assign_type to NET_ADDR_RANDOM so udev creates persistent net rules by matching the device path. Do this by using the dev_hw_addr_random helper function. Signed-off-by: Stefan Assmann <sassmann@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27ixgbe: priority tagging FCoE frames without FCoE offloadJohn Fastabend1-21/+24
The DCB user priority for FCoE is available regardless of whether FCoE offload is enabled (IXGBE_FLAG_FCOE_ENABLED bit is set). This allows proper DCB user priority tagging for FCoE traffic on both 82598 and 82599 devices. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Tested-by: Ross Brattain <ross.b.brattain@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-07-27Bluetooth: Add __init and __exit marks to RFCOMMGustavo F. Padovan2-3/+3
Those annotation save memory and space on the binary. __init code is discarded just after execute and __exit code is discarded if the module is built into the kernel image or unload of modules is not allowed. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2010-07-27Bluetooth: Add __init and __exit marks to UART driversGustavo F. Padovan4-8/+8
Those marks are useful to save space in the binary and in the memory. Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Powered by cgit, Gruvboxed by Blaster4385.