aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-04-21usb: misc: fix improper handling of refcount in uss720_probe()Hangyu Hua1-2/+1
usb_put_dev shouldn't be called when uss720_probe succeeds because of priv->usbdev. At the same time, priv->usbdev shouldn't be set to NULL before destroy_priv in uss720_disconnect because usb_put_dev is in destroy_priv. Fix this by moving priv->usbdev = NULL after usb_put_dev. Fixes: dcb4b8ad6a44 ("misc/uss720: fix memory leak in uss720_probe") Cc: stable <[email protected]> Reviewed-by: Dongliang Mu <[email protected]> Signed-off-by: Hangyu Hua <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21USB: Fix ehci infinite suspend-resume loop issue in zhaoxinWeitao Wango3-0/+28
In zhaoxin platform, some ehci projects will latch a wakeup signal internal when plug in a device on port during system S0. This wakeup signal will turn on when ehci runtime suspend, which will trigger a system control interrupt that will resume ehci back to D0. As no device connect, ehci will be set to runtime suspend and turn on the internal latched wakeup signal again. It will cause a suspend-resume loop and generate system control interrupt continuously. Fixed this issue by clear wakeup signal latched in ehci internal when ehci resume callback is called. Acked-by: Alan Stern <[email protected]> Signed-off-by: Weitao Wang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21usb: typec: tcpm: Fix undefined behavior due to shift overflowing the constantBorislav Petkov1-1/+1
Fix: drivers/usb/typec/tcpm/tcpm.c: In function ‘run_state_machine’: drivers/usb/typec/tcpm/tcpm.c:4724:3: error: case label does not reduce to an integer constant case BDO_MODE_TESTDATA: ^~~~ See https://lore.kernel.org/r/YkwQ6%[email protected] for the gory details as to why it triggers with older gccs only. Signed-off-by: Borislav Petkov <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21usb: typec: rt1719: Fix build error without CONFIG_POWER_SUPPLYRen Zhijie1-0/+1
Building without CONFIG_POWER_SUPPLY will fail: drivers/usb/typec/rt1719.o: In function `rt1719_psy_set_property': rt1719.c:(.text+0x10a): undefined reference to `power_supply_get_drvdata' drivers/usb/typec/rt1719.o: In function `rt1719_psy_get_property': rt1719.c:(.text+0x2c8): undefined reference to `power_supply_get_drvdata' drivers/usb/typec/rt1719.o: In function `devm_rt1719_psy_register': rt1719.c:(.text+0x3e9): undefined reference to `devm_power_supply_register' drivers/usb/typec/rt1719.o: In function `rt1719_irq_handler': rt1719.c:(.text+0xf9f): undefined reference to `power_supply_changed' drivers/usb/typec/rt1719.o: In function `rt1719_update_pwr_opmode.part.9': rt1719.c:(.text+0x657): undefined reference to `power_supply_changed' drivers/usb/typec/rt1719.o: In function `rt1719_attach': rt1719.c:(.text+0x83e): undefined reference to `power_supply_changed' Add POWER_SUPPLY dependency to Kconfig. Fixes: 25d29b980912 ("usb: typec: rt1719: Add support for Richtek RT1719") Reported-by: Hulk Robot <[email protected]> Reviewed-by: ChiYuan Huang <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Signed-off-by: Ren Zhijie <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21usb: typec: ucsi: Fix role swappingHeikki Krogerus1-7/+13
All attempts to swap the roles timed out because the completion was done without releasing the port lock. Fixing that by releasing the lock before starting to wait for the completion. Link: https://lore.kernel.org/linux-usb/[email protected]/ Fixes: ad74b8649bea ("usb: typec: ucsi: Preliminary support for alternate modes") Cc: [email protected] Reported-and-tested-by: Jia-Ju Bai <[email protected]> Signed-off-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21usb: typec: ucsi: Fix reuse of completion structureHeikki Krogerus1-0/+4
The role swapping completion variable is reused, so it needs to be reinitialised every time. Otherwise it will be marked as done after the first time it's used and completing immediately. Link: https://lore.kernel.org/linux-usb/[email protected]/ Fixes: 6df475f804e6 ("usb: typec: ucsi: Start using struct typec_operations") Cc: [email protected] Reported-and-suggested-by: Jack Pham <[email protected]> Signed-off-by: Heikki Krogerus <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21usb: xhci: tegra:Fix PM usage reference leak of ↵zhangqilong1-2/+2
tegra_xusb_unpowergate_partitions pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in reference leak here. We fix it by replacing it with pm_runtime_resume_and_get to keep usage counter balanced. Fixes: 41a7426d25fa ("usb: xhci: tegra: Unlink power domain devices") Cc: stable <[email protected]> Signed-off-by: Zhang Qilong <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-04-21Merge tag 'kvm-riscv-fixes-5.18-2' of https://github.com/kvm-riscv/linux ↵Paolo Bonzini1-9/+12
into HEAD KVM/riscv fixes for 5.18, take #2 - Remove 's' & 'u' as valid ISA extension - Do not allow disabling the base extensions 'i'/'m'/'a'/'c'
2022-04-21fs: unset MNT_WRITE_HOLD on failureChristian Brauner1-1/+13
After mnt_hold_writers() has been called we will always have set MNT_WRITE_HOLD and consequently we always need to pair mnt_hold_writers() with mnt_unhold_writers(). After the recent cleanup in [1] where Al switched from a do-while to a for loop the cleanup currently fails to unset MNT_WRITE_HOLD for the first mount that was changed. Fix this and make sure that the first mount will be cleaned up and add some comments to make it more obvious. Link: https://lore.kernel.org/lkml/[email protected] Link: https://lore.kernel.org/lkml/[email protected] Link: https://lore.kernel.org/r/[email protected] Fixes: e257039f0fc7 ("mount_setattr(): clean the control flow and calling conventions") [1] Cc: Hillf Danton <[email protected]> Cc: Christoph Hellwig <[email protected]> Cc: Al Viro <[email protected]> Reported-by: [email protected] Reported-by: [email protected] Reviewed-by: Christoph Hellwig <[email protected]> Signed-off-by: Christian Brauner (Microsoft) <[email protected]>
2022-04-21Merge tag 'omap-for-v5.18/fixes-take2' of ↵Arnd Bergmann11-24/+103
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps Few regression fixes for omap variants. These mostly fix issues related to warnings added for system suspend, and some devicetree issues: - Make ti-sysc driver quirks for gpt12 timer omap3 specific to fix timer clock disabling for am335x system suspend - Fix new system suspend warning for dra7 vpe caused by trying to use register bits not wired for vpe - Fix mmc boot order for omap3-gta04 that has no mmc2 or 3 wired - Add missing touchscreen properties for am3 - Fix pin muxing for logicpd-som-lv and am3517-evm to not depend on earlier bootloader versions - Fix refcount leak for omap_gic_of_init * tag 'omap-for-v5.18/fixes-take2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: ARM: dts: logicpd-som-lv: Fix wrong pinmuxing on OMAP35 ARM: dts: am3517-evm: Fix misc pinmuxing ARM: dts: am33xx-l4: Add missing touchscreen clock properties ARM: dts: Fix mmc order for omap3-gta04 ARM: dts: dra7: Fix suspend warning for vpe powerdomain bus: ti-sysc: Make omap3 gpt12 quirk handling SoC specific ARM: OMAP2+: Fix refcount leak in omap_gic_of_init iommu/omap: Fix regression in probe for NULL pointer dereference Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Arnd Bergmann <[email protected]>
2022-04-21MAINTAINERS: add Bug entry for Samsung and memory controller driversKrzysztof Kozlowski1-0/+7
Add a Bug sections, indicating preferred mailing method for bug reports, to Samsung SoC related entries and memory controller drivers. Signed-off-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected]' Signed-off-by: Arnd Bergmann <[email protected]>
2022-04-21memory: renesas-rpc-if: Fix HF/OSPI data transfer in Manual ModeGeert Uytterhoeven2-14/+47
HyperFlash devices fail to probe: rpc-if-hyperflash rpc-if-hyperflash: probing of hyperbus device failed In HyperFlash or Octal-SPI Flash mode, the Transfer Data Enable bits (SPIDE) in the Manual Mode Enable Setting Register (SMENR) are derived from half of the transfer size, cfr. the rpcif_bits_set() helper function. However, rpcif_reg_{read,write}() does not take the bus size into account, and does not double all Manual Mode Data Register access sizes when communicating with a HyperFlash or Octal-SPI Flash device. Fix this, and avoid the back-and-forth conversion between transfer size and Transfer Data Enable bits, by explicitly storing the transfer size in struct rpcif, and using that value to determine access size in rpcif_reg_{read,write}(). Enforce that the "high" Manual Mode Read/Write Data Registers (SM[RW]DR1) are only used for 8-byte data accesses. While at it, forbid writing to the Manual Mode Read Data Registers, as they are read-only. Fixes: fff53a551db50f5e ("memory: renesas-rpc-if: Correct QSPI data transfer in Manual mode") Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Tested-by: Lad Prabhakar <[email protected]> Tested-by: Wolfram Sang <[email protected]> Reviewed-by: Wolfram Sang <[email protected]> Link: https://lore.kernel.org/r/cde9bfacf704c81865f57b15d1b48a4793da4286.1649681476.git.geert+renesas@glider.be Link: https://lore.kernel.org/r/[email protected]' Signed-off-by: Arnd Bergmann <[email protected]>
2022-04-21pinctrl: stm32: Do not call stm32_gpio_get() for edge triggered IRQs in EOIMarek Vasut1-0/+4
The stm32_gpio_get() should only be called for LEVEL triggered interrupts, skip calling it for EDGE triggered interrupts altogether to avoid wasting CPU cycles in EOI handler. On this platform, EDGE triggered interrupts are the majority and LEVEL triggered interrupts are the exception no less, and the CPU cycles are not abundant. Fixes: 47beed513a85b ("pinctrl: stm32: Add level interrupt support to gpio irq chip") Signed-off-by: Marek Vasut <[email protected]> Cc: Alexandre Torgue <[email protected]> Cc: Fabien Dessenne <[email protected]> Cc: Linus Walleij <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: [email protected] Cc: [email protected] To: [email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2022-04-21pinctrl: Fix an error in pin-function table of SP7021Wells Lu1-0/+8
The first valid item of pin-function table should start from the third item. The first two items, due to historical and compatible reasons, should be dummy items. The two dummy items were removed accidentally in initial submission. This fix adds them back. Signed-off-by: Wells Lu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2022-04-21btrfs: zoned: use dedicated lock for data relocationNaohiro Aota3-2/+4
Currently, we use btrfs_inode_{lock,unlock}() to grant an exclusive writeback of the relocation data inode in btrfs_zoned_data_reloc_{lock,unlock}(). However, that can cause a deadlock in the following path. Thread A takes btrfs_inode_lock() and waits for metadata reservation by e.g, waiting for writeback: prealloc_file_extent_cluster() - btrfs_inode_lock(&inode->vfs_inode, 0); - btrfs_prealloc_file_range() ... - btrfs_replace_file_extents() - btrfs_start_transaction ... - btrfs_reserve_metadata_bytes() Thread B (e.g, doing a writeback work) needs to wait for the inode lock to continue writeback process: do_writepages - btrfs_writepages - extent_writpages - btrfs_zoned_data_reloc_lock(BTRFS_I(inode)); - btrfs_inode_lock() The deadlock is caused by relying on the vfs_inode's lock. By using it, we introduced unnecessary exclusion of writeback and btrfs_prealloc_file_range(). Also, the lock at this point is useless as we don't have any dirty pages in the inode yet. Introduce fs_info->zoned_data_reloc_io_lock and use it for the exclusive writeback. Fixes: 35156d852762 ("btrfs: zoned: only allow one process to add pages to a relocation inode") CC: [email protected] # 5.16.x: 869f4cdc73f9: btrfs: zoned: encapsulate inode locking for zoned relocation CC: [email protected] # 5.16.x CC: [email protected] # 5.17 Cc: Johannes Thumshirn <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Signed-off-by: Naohiro Aota <[email protected]> Signed-off-by: David Sterba <[email protected]>
2022-04-21btrfs: fix assertion failure during scrub due to block group reallocationFilipe Manana2-2/+31
During a scrub, or device replace, we can race with block group removal and allocation and trigger the following assertion failure: [7526.385524] assertion failed: cache->start == chunk_offset, in fs/btrfs/scrub.c:3817 [7526.387351] ------------[ cut here ]------------ [7526.387373] kernel BUG at fs/btrfs/ctree.h:3599! [7526.388001] invalid opcode: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC PTI [7526.388970] CPU: 2 PID: 1158150 Comm: btrfs Not tainted 5.17.0-rc8-btrfs-next-114 #4 [7526.390279] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [7526.392430] RIP: 0010:assertfail.constprop.0+0x18/0x1a [btrfs] [7526.393520] Code: f3 48 c7 c7 20 (...) [7526.396926] RSP: 0018:ffffb9154176bc40 EFLAGS: 00010246 [7526.397690] RAX: 0000000000000048 RBX: ffffa0db8a910000 RCX: 0000000000000000 [7526.398732] RDX: 0000000000000000 RSI: ffffffff9d7239a2 RDI: 00000000ffffffff [7526.399766] RBP: ffffa0db8a911e10 R08: ffffffffa71a3ca0 R09: 0000000000000001 [7526.400793] R10: 0000000000000001 R11: 0000000000000000 R12: ffffa0db4b170800 [7526.401839] R13: 00000003494b0000 R14: ffffa0db7c55b488 R15: ffffa0db8b19a000 [7526.402874] FS: 00007f6c99c40640(0000) GS:ffffa0de6d200000(0000) knlGS:0000000000000000 [7526.404038] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [7526.405040] CR2: 00007f31b0882160 CR3: 000000014b38c004 CR4: 0000000000370ee0 [7526.406112] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [7526.407148] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [7526.408169] Call Trace: [7526.408529] <TASK> [7526.408839] scrub_enumerate_chunks.cold+0x11/0x79 [btrfs] [7526.409690] ? do_wait_intr_irq+0xb0/0xb0 [7526.410276] btrfs_scrub_dev+0x226/0x620 [btrfs] [7526.410995] ? preempt_count_add+0x49/0xa0 [7526.411592] btrfs_ioctl+0x1ab5/0x36d0 [btrfs] [7526.412278] ? __fget_files+0xc9/0x1b0 [7526.412825] ? kvm_sched_clock_read+0x14/0x40 [7526.413459] ? lock_release+0x155/0x4a0 [7526.414022] ? __x64_sys_ioctl+0x83/0xb0 [7526.414601] __x64_sys_ioctl+0x83/0xb0 [7526.415150] do_syscall_64+0x3b/0xc0 [7526.415675] entry_SYSCALL_64_after_hwframe+0x44/0xae [7526.416408] RIP: 0033:0x7f6c99d34397 [7526.416931] Code: 3c 1c e8 1c ff (...) [7526.419641] RSP: 002b:00007f6c99c3fca8 EFLAGS: 00000246 ORIG_RAX: 0000000000000010 [7526.420735] RAX: ffffffffffffffda RBX: 00005624e1e007b0 RCX: 00007f6c99d34397 [7526.421779] RDX: 00005624e1e007b0 RSI: 00000000c400941b RDI: 0000000000000003 [7526.422820] RBP: 0000000000000000 R08: 00007f6c99c40640 R09: 0000000000000000 [7526.423906] R10: 00007f6c99c40640 R11: 0000000000000246 R12: 00007fff746755de [7526.424924] R13: 00007fff746755df R14: 0000000000000000 R15: 00007f6c99c40640 [7526.425950] </TASK> That assertion is relatively new, introduced with commit d04fbe19aefd2 ("btrfs: scrub: cleanup the argument list of scrub_chunk()"). The block group we get at scrub_enumerate_chunks() can actually have a start address that is smaller then the chunk offset we extracted from a device extent item we got from the commit root of the device tree. This is very rare, but it can happen due to a race with block group removal and allocation. For example, the following steps show how this can happen: 1) We are at transaction T, and we have the following blocks groups, sorted by their logical start address: [ bg A, start address A, length 1G (data) ] [ bg B, start address B, length 1G (data) ] (...) [ bg W, start address W, length 1G (data) ] --> logical address space hole of 256M, there used to be a 256M metadata block group here [ bg Y, start address Y, length 256M (metadata) ] --> Y matches W's end offset + 256M Block group Y is the block group with the highest logical address in the whole filesystem; 2) Block group Y is deleted and its extent mapping is removed by the call to remove_extent_mapping() made from btrfs_remove_block_group(). So after this point, the last element of the mapping red black tree, its rightmost node, is the mapping for block group W; 3) While still at transaction T, a new data block group is allocated, with a length of 1G. When creating the block group we do a call to find_next_chunk(), which returns the logical start address for the new block group. This calls returns X, which corresponds to the end offset of the last block group, the rightmost node in the mapping red black tree (fs_info->mapping_tree), plus one. So we get a new block group that starts at logical address X and with a length of 1G. It spans over the whole logical range of the old block group Y, that was previously removed in the same transaction. However the device extent allocated to block group X is not the same device extent that was used by block group Y, and it also does not overlap that extent, which must be always the case because we allocate extents by searching through the commit root of the device tree (otherwise it could corrupt a filesystem after a power failure or an unclean shutdown in general), so the extent allocator is behaving as expected; 4) We have a task running scrub, currently at scrub_enumerate_chunks(). There it searches for device extent items in the device tree, using its commit root. It finds a device extent item that was used by block group Y, and it extracts the value Y from that item into the local variable 'chunk_offset', using btrfs_dev_extent_chunk_offset(); It then calls btrfs_lookup_block_group() to find block group for the logical address Y - since there's currently no block group that starts at that logical address, it returns block group X, because its range contains Y. This results in triggering the assertion: ASSERT(cache->start == chunk_offset); right before calling scrub_chunk(), as cache->start is X and chunk_offset is Y. This is more likely to happen of filesystems not larger than 50G, because for these filesystems we use a 256M size for metadata block groups and a 1G size for data block groups, while for filesystems larger than 50G, we use a 1G size for both data and metadata block groups (except for zoned filesystems). It could also happen on any filesystem size due to the fact that system block groups are always smaller (32M) than both data and metadata block groups, but these are not frequently deleted, so much less likely to trigger the race. So make scrub skip any block group with a start offset that is less than the value we expect, as that means it's a new block group that was created in the current transaction. It's pointless to continue and try to scrub its extents, because scrub searches for extents using the commit root, so it won't find any. For a device replace, skip it as well for the same reasons, and we don't need to worry about the possibility of extents of the new block group not being to the new device, because we have the write duplication setup done through btrfs_map_block(). Fixes: d04fbe19aefd ("btrfs: scrub: cleanup the argument list of scrub_chunk()") CC: [email protected] # 5.17 Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2022-04-21powerpc/perf: Fix 32bit compileAlexey Kardashevskiy1-2/+2
The "read_bhrb" global symbol is only called under CONFIG_PPC64 of arch/powerpc/perf/core-book3s.c but it is compiled for both 32 and 64 bit anyway (and LLVM fails to link this on 32bit). This fixes it by moving bhrb.o to obj64 targets. Signed-off-by: Alexey Kardashevskiy <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-21powerpc/perf: Fix power10 event alternativesAthira Rajeev1-1/+1
When scheduling a group of events, there are constraint checks done to make sure all events can go in a group. Example, one of the criteria is that events in a group cannot use the same PMC. But platform specific PMU supports alternative event for some of the event codes. During perf_event_open(), if any event group doesn't match constraint check criteria, further lookup is done to find alternative event. By current design, the array of alternatives events in PMU code is expected to be sorted by column 0. This is because in find_alternative() the return criteria is based on event code comparison. ie. "event < ev_alt[i][0])". This optimisation is there since find_alternative() can be called multiple times. In power10 PMU code, the alternative event array is not sorted properly and hence there is breakage in finding alternative event. To work with existing logic, fix the alternative event array to be sorted by column 0 for power10-pmu.c Results: In case where an alternative event is not chosen when we could, events will be multiplexed. ie, time sliced where it could actually run concurrently. Example, in power10 PM_INST_CMPL_ALT(0x00002) has alternative event, PM_INST_CMPL(0x500fa). Without the fix, if a group of events with PMC1 to PMC4 is used along with PM_INST_CMPL_ALT, it will be time sliced since all programmable PMC's are consumed already. But with the fix, when it picks alternative event on PMC5, all events will run concurrently. Before: # perf stat -e r00002,r100fc,r200fa,r300fc,r400fc Performance counter stats for 'system wide': 328668935 r00002 (79.94%) 56501024 r100fc (79.95%) 49564238 r200fa (79.95%) 376 r300fc (80.19%) 660 r400fc (79.97%) 4.039150522 seconds time elapsed With the fix, since alternative event is chosen to run on PMC6, events will be run concurrently. After: # perf stat -e r00002,r100fc,r200fa,r300fc,r400fc Performance counter stats for 'system wide': 23596607 r00002 4907738 r100fc 2283608 r200fa 135 r300fc 248 r400fc 1.664671390 seconds time elapsed Fixes: a64e697cef23 ("powerpc/perf: power10 Performance Monitoring support") Signed-off-by: Athira Rajeev <[email protected]> Reviewed-by: Madhavan Srinivasan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-21powerpc/perf: Fix power9 event alternativesAthira Rajeev1-4/+4
When scheduling a group of events, there are constraint checks done to make sure all events can go in a group. Example, one of the criteria is that events in a group cannot use the same PMC. But platform specific PMU supports alternative event for some of the event codes. During perf_event_open(), if any event group doesn't match constraint check criteria, further lookup is done to find alternative event. By current design, the array of alternatives events in PMU code is expected to be sorted by column 0. This is because in find_alternative() the return criteria is based on event code comparison. ie. "event < ev_alt[i][0])". This optimisation is there since find_alternative() can be called multiple times. In power9 PMU code, the alternative event array is not sorted properly and hence there is breakage in finding alternative events. To work with existing logic, fix the alternative event array to be sorted by column 0 for power9-pmu.c Results: With alternative events, multiplexing can be avoided. That is, for example, in power9 PM_LD_MISS_L1 (0x3e054) has alternative event, PM_LD_MISS_L1_ALT (0x400f0). This is an identical event which can be programmed in a different PMC. Before: # perf stat -e r3e054,r300fc Performance counter stats for 'system wide': 1057860 r3e054 (50.21%) 379 r300fc (49.79%) 0.944329741 seconds time elapsed Since both the events are using PMC3 in this case, they are multiplexed here. After: # perf stat -e r3e054,r300fc Performance counter stats for 'system wide': 1006948 r3e054 182 r300fc Fixes: 91e0bd1e6251 ("powerpc/perf: Add PM_LD_MISS_L1 and PM_BR_2PATH to power9 event list") Signed-off-by: Athira Rajeev <[email protected]> Reviewed-by: Madhavan Srinivasan <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-21drm/amdgpu: partial revert "remove ctx->lock" v2Christian König3-6/+18
This reverts commit 461fa7b0ac565ef25c1da0ced31005dd437883a7. We are missing some inter dependencies here so re-introduce the lock until we have figured out what's missing. Just drop/retake it while adding dependencies. v2: still drop the lock while adding dependencies Signed-off-by: Christian König <[email protected]> Tested-by: Mikhail Gavrilov <[email protected]> (v1) Fixes: 461fa7b0ac56 ("drm/amdgpu: remove ctx->lock") Acked-by: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-04-21drivers: net: hippi: Fix deadlock in rr_close()Duoming Zhou1-0/+2
There is a deadlock in rr_close(), which is shown below: (Thread 1) | (Thread 2) | rr_open() rr_close() | add_timer() spin_lock_irqsave() //(1) | (wait a time) ... | rr_timer() del_timer_sync() | spin_lock_irqsave() //(2) (wait timer to stop) | ... We hold rrpriv->lock in position (1) of thread 1 and use del_timer_sync() to wait timer to stop, but timer handler also need rrpriv->lock in position (2) of thread 2. As a result, rr_close() will block forever. This patch extracts del_timer_sync() from the protection of spin_lock_irqsave(), which could let timer handler to obtain the needed lock. Signed-off-by: Duoming Zhou <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-04-21USB: serial: whiteheat: fix heap overflow in WHITEHEAT_GET_DTR_RTSKees Cook1-3/+2
The sizeof(struct whitehat_dr_info) can be 4 bytes under CONFIG_AEABI=n due to "-mabi=apcs-gnu", even though it has a single u8: whiteheat_private { __u8 mcr; /* 0 1 */ /* size: 4, cachelines: 1, members: 1 */ /* padding: 3 */ /* last cacheline: 4 bytes */ }; The result is technically harmless, as both the source and the destinations are currently the same allocation size (4 bytes) and don't use their padding, but if anything were to ever be added after the "mcr" member in "struct whiteheat_private", it would be overwritten. The structs both have a single u8 "mcr" member, but are 4 bytes in padded size. The memcpy() destination was explicitly targeting the u8 member (size 1) with the length of the whole structure (size 4), triggering the memcpy buffer overflow warning: In file included from include/linux/string.h:253, from include/linux/bitmap.h:11, from include/linux/cpumask.h:12, from include/linux/smp.h:13, from include/linux/lockdep.h:14, from include/linux/spinlock.h:62, from include/linux/mmzone.h:8, from include/linux/gfp.h:6, from include/linux/slab.h:15, from drivers/usb/serial/whiteheat.c:17: In function 'fortify_memcpy_chk', inlined from 'firm_send_command' at drivers/usb/serial/whiteheat.c:587:4: include/linux/fortify-string.h:328:25: warning: call to '__write_overflow_field' declared with attribute warning: detected write beyond size of field (1st parameter); maybe use struct_group()? [-Wattribute-warning] 328 | __write_overflow_field(p_size_field, size); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Instead, just assign the one byte directly. Reported-by: kernel test robot <[email protected]> Link: https://lore.kernel.org/lkml/[email protected] Cc: [email protected] Signed-off-by: Kees Cook <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johan Hovold <[email protected]>
2022-04-21ALSA: hda/realtek: Enable mute/micmute LEDs and limit mic boost on EliteBook ↵Andy Chi1-2/+9
845/865 G9 On HP EliteBook 845 G9 and EliteBook 865 G9, the audio LEDs can be enabled by ALC285_FIXUP_HP_MUTE_LED. So use it accordingly. Signed-off-by: Andy Chi <[email protected]> Fixes: 07bcab93946c ("ALSA: hda/realtek: Add support for HP Laptops") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-04-21mtd: rawnand: qcom: fix memory corruption that causes panicMd Sadre Alam1-11/+13
This patch fixes a memory corruption that occurred in the nand_scan() path for Hynix nand device. On boot, for Hynix nand device will panic at a weird place: | Unable to handle kernel NULL pointer dereference at virtual address 00000070 | [00000070] *pgd=00000000 | Internal error: Oops: 5 [#1] PREEMPT SMP ARM | Modules linked in: | CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.17.0-01473-g13ae1769cfb0 #38 | Hardware name: Generic DT based system | PC is at nandc_set_reg+0x8/0x1c | LR is at qcom_nandc_command+0x20c/0x5d0 | pc : [<c088b74c>] lr : [<c088d9c8>] psr: 00000113 | sp : c14adc50 ip : c14ee208 fp : c0cc970c | r10: 000000a3 r9 : 00000000 r8 : 00000040 | r7 : c16f6a00 r6 : 00000090 r5 : 00000004 r4 :c14ee040 | r3 : 00000000 r2 : 0000000b r1 : 00000000 r0 :c14ee040 | Flags: nzcv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none | Control: 10c5387d Table: 8020406a DAC: 00000051 | Register r0 information: slab kmalloc-2k start c14ee000 pointer offset 64 size 2048 | Process swapper/0 (pid: 1, stack limit = 0x(ptrval)) | nandc_set_reg from qcom_nandc_command+0x20c/0x5d0 | qcom_nandc_command from nand_readid_op+0x198/0x1e8 | nand_readid_op from hynix_nand_has_valid_jedecid+0x30/0x78 | hynix_nand_has_valid_jedecid from hynix_nand_init+0xb8/0x454 | hynix_nand_init from nand_scan_with_ids+0xa30/0x14a8 | nand_scan_with_ids from qcom_nandc_probe+0x648/0x7b0 | qcom_nandc_probe from platform_probe+0x58/0xac The problem is that the nand_scan()'s qcom_nand_attach_chip callback is updating the nandc->max_cwperpage from 1 to 4 or 8 based on page size. This causes the sg_init_table of clear_bam_transaction() in the driver's qcom_nandc_command() to memset much more than what was initially allocated by alloc_bam_transaction(). This patch will update nandc->max_cwperpage 1 to 4 or 8 based on page size in qcom_nand_attach_chip call back after freeing the previously allocated memory for bam txn as per nandc->max_cwperpage = 1 and then again allocating bam txn as per nandc->max_cwperpage = 4 or 8 based on page size in qcom_nand_attach_chip call back itself. Cc: [email protected] Fixes: 6a3cec64f18c ("mtd: rawnand: qcom: convert driver to nand_scan()") Reported-by: Konrad Dybcio <[email protected]> Reviewed-by: Manivannan Sadhasivam <[email protected]> Co-developed-by: Sricharan R <[email protected]> Signed-off-by: Sricharan R <[email protected]> Signed-off-by: Md Sadre Alam <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected]
2022-04-21mtd: fix 'part' field data corruption in mtd_infoOleksandr Ocheretnyi1-4/+2
Commit 46b5889cc2c5 ("mtd: implement proper partition handling") started using "mtd_get_master_ofs()" in mtd callbacks to determine memory offsets by means of 'part' field from mtd_info, what previously was smashed accessing 'master' field in the mtd_set_dev_defaults() method. That provides wrong offset what causes hardware access errors. Just make 'part', 'master' as separate fields, rather than using union type to avoid 'part' data corruption when mtd_set_dev_defaults() is called. Fixes: 46b5889cc2c5 ("mtd: implement proper partition handling") Signed-off-by: Oleksandr Ocheretnyi <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected]
2022-04-21mtd: rawnand: Fix return value check of wait_for_completion_timeoutMiaoqian Lin1-6/+8
wait_for_completion_timeout() returns unsigned long not int. It returns 0 if timed out, and positive if completed. The check for <= 0 is ambiguous and should be == 0 here indicating timeout which is the only error case. Fixes: 83738d87e3a0 ("mtd: sh_flctl: Add DMA capabilty") Signed-off-by: Miaoqian Lin <[email protected]> Signed-off-by: Miquel Raynal <[email protected]> Link: https://lore.kernel.org/linux-mtd/[email protected]
2022-04-21Revert "drm: of: Lookup if child node has panel or bridge"Bjorn Andersson1-17/+0
Commit '80253168dbfd ("drm: of: Lookup if child node has panel or bridge")' attempted to simplify the case of expressing a simple panel under a DSI controller, by assuming that the first non-graph child node was a panel or bridge. Unfortunately for non-trivial cases the first child node might not be a panel or bridge. Examples of this can be a aux-bus in the case of DisplayPort, or an opp-table represented before the panel node. In these cases the reverted commit prevents the caller from ever finding a reference to the panel. This reverts commit '80253168dbfd ("drm: of: Lookup if child node has panel or bridge")', in favor of using an explicit graph reference to the panel in the trivial case as well. Signed-off-by: Bjorn Andersson <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-04-21Revert "drm: of: Properly try all possible cases for bridge/panel detection"Bjorn Andersson1-50/+49
Commit '80253168dbfd ("drm: of: Lookup if child node has panel or bridge")' introduced the ability to describe a panel under a display controller without having to use a graph to connect the controller to its single child panel (or bridge). The implementation of this would find the first non-graph node and attempt to acquire the related panel or bridge. This prevents cases where any other child node, such as a aux bus for a DisplayPort controller, or an opp-table to find the referenced panel. Commit '67bae5f28c89 ("drm: of: Properly try all possible cases for bridge/panel detection")' attempted to solve this problem by not bypassing the graph reference lookup before attempting to find the panel or bridge. While this does solve the case where a proper graph reference is present, it does not allow the caller to distinguish between a yet-to-be-probed panel or bridge and the absence of a reference to a panel. One such case is a DisplayPort controller that on some boards have an explicitly described reference to a panel, but on others have a discoverable DisplayPort display attached (which doesn't need to be expressed in DeviceTree). This reverts commit '67bae5f28c89 ("drm: of: Properly try all possible cases for bridge/panel detection")', as a step towards reverting commit '80253168dbfd ("drm: of: Lookup if child node has panel or bridge")'. Signed-off-by: Bjorn Andersson <[email protected]> Acked-by: Paul Kocialkowski <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-04-21drm/vc4: Use pm_runtime_resume_and_get to fix pm_runtime_get_sync() usageMiaoqian Lin1-1/+1
If the device is already in a runtime PM enabled state pm_runtime_get_sync() will return 1. Also, we need to call pm_runtime_put_noidle() when pm_runtime_get_sync() fails, so use pm_runtime_resume_and_get() instead. this function will handle this. Fixes: 4078f5757144 ("drm/vc4: Add DSI driver") Signed-off-by: Miaoqian Lin <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-04-21KVM: PPC: Fix TCE handling for VFIOAlexey Kardashevskiy2-44/+45
The LoPAPR spec defines a guest visible IOMMU with a variable page size. Currently QEMU advertises 4K, 64K, 2M, 16MB pages, a Linux VM picks the biggest (16MB). In the case of a passed though PCI device, there is a hardware IOMMU which does not support all pages sizes from the above - P8 cannot do 2MB and P9 cannot do 16MB. So for each emulated 16M IOMMU page we may create several smaller mappings ("TCEs") in the hardware IOMMU. The code wrongly uses the emulated TCE index instead of hardware TCE index in error handling. The problem is easier to see on POWER8 with multi-level TCE tables (when only the first level is preallocated) as hash mode uses real mode TCE hypercalls handlers. The kernel starts using indirect tables when VMs get bigger than 128GB (depends on the max page order). The very first real mode hcall is going to fail with H_TOO_HARD as in the real mode we cannot allocate memory for TCEs (we can in the virtual mode) but on the way out the code attempts to clear hardware TCEs using emulated TCE indexes which corrupts random kernel memory because it_offset==1<<59 is subtracted from those indexes and the resulting index is out of the TCE table bounds. This fixes kvmppc_clear_tce() to use the correct TCE indexes. While at it, this fixes TCE cache invalidation which uses emulated TCE indexes instead of the hardware ones. This went unnoticed as 64bit DMA is used these days and VMs map all RAM in one go and only then do DMA and this is when the TCE cache gets populated. Potentially this could slow down mapping, however normally 16MB emulated pages are backed by 64K hardware pages so it is one write to the "TCE Kill" per 256 updates which is not that bad considering the size of the cache (1024 TCEs or so). Fixes: ca1fc489cfa0 ("KVM: PPC: Book3S: Allow backing bigger guest IOMMU pages with smaller physical pages") Signed-off-by: Alexey Kardashevskiy <[email protected]> Tested-by: David Gibson <[email protected]> Reviewed-by: Frederic Barrat <[email protected]> Reviewed-by: David Gibson <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-21pinctrl: samsung: fix missing GPIOLIB on ARM64 Exynos configKrzysztof Kozlowski2-8/+4
The Samsung pinctrl drivers depend on OF_GPIO, which is part of GPIOLIB. ARMv7 Exynos platform selects GPIOLIB and Samsung pinctrl drivers. ARMv8 Exynos selects only the latter leading to possible wrong configuration on ARMv8 build: WARNING: unmet direct dependencies detected for PINCTRL_EXYNOS Depends on [n]: PINCTRL [=y] && OF_GPIO [=n] && (ARCH_EXYNOS [=y] || ARCH_S5PV210 || COMPILE_TEST [=y]) Selected by [y]: - ARCH_EXYNOS [=y] Always select the GPIOLIB from the Samsung pinctrl drivers to fix the issue. This requires removing of OF_GPIO dependency (to avoid recursive dependency), so add dependency on OF for COMPILE_TEST cases. Reported-by: Necip Fazil Yildiran <[email protected]> Fixes: eed6b3eb20b9 ("arm64: Split out platform options to separate Kconfig") Cc: <[email protected]> Signed-off-by: Krzysztof Kozlowski <[email protected]> Reviewed-by: Arnd Bergmann <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-21powerpc/time: Always set decrementer in timer_interrupt()Michael Ellerman1-15/+14
This is a partial revert of commit 0faf20a1ad16 ("powerpc/64s/interrupt: Don't enable MSR[EE] in irq handlers unless perf is in use"). Prior to that commit, we always set the decrementer in timer_interrupt(), to clear the timer interrupt. Otherwise we could end up continuously taking timer interrupts. When high res timers are enabled there is no problem seen with leaving the decrementer untouched in timer_interrupt(), because it will be programmed via hrtimer_interrupt() -> tick_program_event() -> clockevents_program_event() -> decrementer_set_next_event(). However with CONFIG_HIGH_RES_TIMERS=n or booting with highres=off, we see a stall/lockup, because tick_nohz_handler() does not cause a reprogram of the decrementer, leading to endless timer interrupts. Example trace: [ 1.898617][ T7] Freeing initrd memory: 2624K^M [ 22.680919][ C1] rcu: INFO: rcu_sched detected stalls on CPUs/tasks:^M [ 22.682281][ C1] rcu: 0-....: (25 ticks this GP) idle=073/0/0x1 softirq=10/16 fqs=1050 ^M [ 22.682851][ C1] (detected by 1, t=2102 jiffies, g=-1179, q=476)^M [ 22.683649][ C1] Sending NMI from CPU 1 to CPUs 0:^M [ 22.685252][ C0] NMI backtrace for cpu 0^M [ 22.685649][ C0] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.16.0-rc2-00185-g0faf20a1ad16 #145^M [ 22.686393][ C0] NIP: c000000000016d64 LR: c000000000f6cca4 CTR: c00000000019c6e0^M [ 22.686774][ C0] REGS: c000000002833590 TRAP: 0500 Not tainted (5.16.0-rc2-00185-g0faf20a1ad16)^M [ 22.687222][ C0] MSR: 8000000000009033 <SF,EE,ME,IR,DR,RI,LE> CR: 24000222 XER: 00000000^M [ 22.688297][ C0] CFAR: c00000000000c854 IRQMASK: 0 ^M ... [ 22.692637][ C0] NIP [c000000000016d64] arch_local_irq_restore+0x174/0x250^M [ 22.694443][ C0] LR [c000000000f6cca4] __do_softirq+0xe4/0x3dc^M [ 22.695762][ C0] Call Trace:^M [ 22.696050][ C0] [c000000002833830] [c000000000f6cc80] __do_softirq+0xc0/0x3dc (unreliable)^M [ 22.697377][ C0] [c000000002833920] [c000000000151508] __irq_exit_rcu+0xd8/0x130^M [ 22.698739][ C0] [c000000002833950] [c000000000151730] irq_exit+0x20/0x40^M [ 22.699938][ C0] [c000000002833970] [c000000000027f40] timer_interrupt+0x270/0x460^M [ 22.701119][ C0] [c0000000028339d0] [c0000000000099a8] decrementer_common_virt+0x208/0x210^M Possibly this should be fixed in the lowres timing code, but that would be a generic change and could take some time and may not backport easily, so for now make the programming of the decrementer unconditional again in timer_interrupt() to avoid the stall/lockup. Fixes: 0faf20a1ad16 ("powerpc/64s/interrupt: Don't enable MSR[EE] in irq handlers unless perf is in use") Reported-by: Miguel Ojeda <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Reviewed-by: Nicholas Piggin <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-20cifs: destage any unwritten data to the server before calling copychunk_writeRonnie Sahlberg1-0/+8
because the copychunk_write might cover a region of the file that has not yet been sent to the server and thus fail. A simple way to reproduce this is: truncate -s 0 /mnt/testfile; strace -f -o x -ttT xfs_io -i -f -c 'pwrite 0k 128k' -c 'fcollapse 16k 24k' /mnt/testfile the issue is that the 'pwrite 0k 128k' becomes rearranged on the wire with the 'fcollapse 16k 24k' due to write-back caching. fcollapse is implemented in cifs.ko as a SMB2 IOCTL(COPYCHUNK_WRITE) call and it will fail serverside since the file is still 0b in size serverside until the writes have been destaged. To avoid this we must ensure that we destage any unwritten data to the server before calling COPYCHUNK_WRITE. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1997373 Reported-by: Xiaoli Feng <[email protected]> Signed-off-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-04-20cifs: use correct lock type in cifs_reconnect()Paulo Alcantara1-1/+8
TCP_Server_Info::origin_fullpath and TCP_Server_Info::leaf_fullpath are protected by refpath_lock mutex and not cifs_tcp_ses_lock spinlock. Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Cc: [email protected] Reviewed-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-04-20cifs: fix NULL ptr dereference in refresh_mounts()Paulo Alcantara2-7/+14
Either mount(2) or automount might not have server->origin_fullpath set yet while refresh_cache_worker() is attempting to refresh DFS referrals. Add missing NULL check and locking around it. This fixes bellow crash: [ 1070.276835] general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI [ 1070.277676] KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] [ 1070.278219] CPU: 1 PID: 8506 Comm: kworker/u8:1 Not tainted 5.18.0-rc3 #10 [ 1070.278701] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.15.0-0-g2dd4b9b-rebuilt.opensuse.org 04/01/2014 [ 1070.279495] Workqueue: cifs-dfscache refresh_cache_worker [cifs] [ 1070.280044] RIP: 0010:strcasecmp+0x34/0x150 [ 1070.280359] Code: 00 00 00 fc ff df 41 54 55 48 89 fd 53 48 83 ec 10 eb 03 4c 89 fe 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 08 84 c0 0f 85 bc 00 00 00 0f b6 45 ff 44 [ 1070.281729] RSP: 0018:ffffc90008367958 EFLAGS: 00010246 [ 1070.282114] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000 [ 1070.282691] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 1070.283273] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff873eda27 [ 1070.283857] R10: ffffc900083679a0 R11: 0000000000000001 R12: ffff88812624c000 [ 1070.284436] R13: dffffc0000000000 R14: ffff88810e6e9a88 R15: ffff888119bb9000 [ 1070.284990] FS: 0000000000000000(0000) GS:ffff888151200000(0000) knlGS:0000000000000000 [ 1070.285625] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1070.286100] CR2: 0000561a4d922418 CR3: 000000010aecc000 CR4: 0000000000350ee0 [ 1070.286683] Call Trace: [ 1070.286890] <TASK> [ 1070.287070] refresh_cache_worker+0x895/0xd20 [cifs] [ 1070.287475] ? __refresh_tcon.isra.0+0xfb0/0xfb0 [cifs] [ 1070.287905] ? __lock_acquire+0xcd1/0x6960 [ 1070.288247] ? is_dynamic_key+0x1a0/0x1a0 [ 1070.288591] ? lockdep_hardirqs_on_prepare+0x410/0x410 [ 1070.289012] ? lock_downgrade+0x6f0/0x6f0 [ 1070.289318] process_one_work+0x7bd/0x12d0 [ 1070.289637] ? worker_thread+0x160/0xec0 [ 1070.289970] ? pwq_dec_nr_in_flight+0x230/0x230 [ 1070.290318] ? _raw_spin_lock_irq+0x5e/0x90 [ 1070.290619] worker_thread+0x5ac/0xec0 [ 1070.290891] ? process_one_work+0x12d0/0x12d0 [ 1070.291199] kthread+0x2a5/0x350 [ 1070.291430] ? kthread_complete_and_exit+0x20/0x20 [ 1070.291770] ret_from_fork+0x22/0x30 [ 1070.292050] </TASK> [ 1070.292223] Modules linked in: bpfilter cifs cifs_arc4 cifs_md4 [ 1070.292765] ---[ end trace 0000000000000000 ]--- [ 1070.293108] RIP: 0010:strcasecmp+0x34/0x150 [ 1070.293471] Code: 00 00 00 fc ff df 41 54 55 48 89 fd 53 48 83 ec 10 eb 03 4c 89 fe 48 89 ef 48 83 c5 01 48 89 f8 48 89 fa 48 c1 e8 03 83 e2 07 <42> 0f b6 04 28 38 d0 7f 08 84 c0 0f 85 bc 00 00 00 0f b6 45 ff 44 [ 1070.297718] RSP: 0018:ffffc90008367958 EFLAGS: 00010246 [ 1070.298622] RAX: 0000000000000000 RBX: dffffc0000000000 RCX: 0000000000000000 [ 1070.299428] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 [ 1070.300296] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffffff873eda27 [ 1070.301204] R10: ffffc900083679a0 R11: 0000000000000001 R12: ffff88812624c000 [ 1070.301932] R13: dffffc0000000000 R14: ffff88810e6e9a88 R15: ffff888119bb9000 [ 1070.302645] FS: 0000000000000000(0000) GS:ffff888151200000(0000) knlGS:0000000000000000 [ 1070.303462] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1070.304131] CR2: 0000561a4d922418 CR3: 000000010aecc000 CR4: 0000000000350ee0 [ 1070.305004] Kernel panic - not syncing: Fatal exception [ 1070.305711] Kernel Offset: disabled [ 1070.305971] ---[ end Kernel panic - not syncing: Fatal exception ]--- Signed-off-by: Paulo Alcantara (SUSE) <[email protected]> Cc: [email protected] Reviewed-by: Ronnie Sahlberg <[email protected]> Signed-off-by: Steve French <[email protected]>
2022-04-20drm/vmwgfx: Fix gem refcounting and memory evictionsZack Rusin3-30/+28
v2: Add the last part of the ref count fix which was spotted by Philipp Sieweck where the ref count of cpu writers is off due to ERESTARTSYS or EBUSY during bo waits. The initial GEM port broke refcounting on shareable (prime) surfaces and memory evictions. The prime surfaces broke because the parent surfaces weren't increasing the ref count on GEM surfaces, which meant that the memory backing textures could have been deleted while the texture was still accessible. The evictions broke due to a typo, the code was supposed to exit if the passed buffers were not vmw_buffer_object not if they were. They're tied because the evictions depend on having memory to actually evict. This fixes crashes with XA state tracker which is used for xrender acceleration on xf86-video-vmware, apps/tests which use a lot of memory (a good test being the piglit's streaming-texture-leak) and desktops. Signed-off-by: Zack Rusin <[email protected]> Fixes: 8afa13a0583f ("drm/vmwgfx: Implement DRIVER_GEM") Reported-by: Philipp Sieweck <[email protected]> Cc: <[email protected]> # v5.17+ Reviewed-by: Maaz Mombasawala <[email protected]> Reviewed-by: Martin Krastev <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-04-21zonefs: Fix management of open zonesDamien Le Moal1-5/+40
The mount option "explicit_open" manages the device open zone resources to ensure that if an application opens a sequential file for writing, the file zone can always be written by explicitly opening the zone and accounting for that state with the s_open_zones counter. However, if some zones are already open when mounting, the device open zone resource usage status will be larger than the initial s_open_zones value of 0. Ensure that this inconsistency does not happen by closing any sequential zone that is open when mounting. Furthermore, with ZNS drives, closing an explicitly open zone that has not been written will change the zone state to "closed", that is, the zone will remain in an active state. Since this can then cause failures of explicit open operations on other zones if the drive active zone resources are exceeded, we need to make sure that the zone is not active anymore by resetting it instead of closing it. To address this, zonefs_zone_mgmt() is modified to change a REQ_OP_ZONE_CLOSE request into a REQ_OP_ZONE_RESET for sequential zones that have not been written. Fixes: b5c00e975779 ("zonefs: open/close zone on file open/close") Cc: <[email protected]> Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Hans Holmberg <[email protected]>
2022-04-21zonefs: Clear inode information flags on inode creationDamien Le Moal1-0/+1
Ensure that the i_flags field of struct zonefs_inode_info is cleared to 0 when initializing a zone file inode, avoiding seeing the flag ZONEFS_ZONE_OPEN being incorrectly set. Fixes: b5c00e975779 ("zonefs: open/close zone on file open/close") Cc: <[email protected]> Signed-off-by: Damien Le Moal <[email protected]> Reviewed-by: Johannes Thumshirn <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Reviewed-by: Hans Holmberg <[email protected]>
2022-04-21pinctrl: mediatek: moore: Fix build errorYueHaibing1-0/+1
If EINT_MTK is m and PINCTRL_MTK_V2 is y, build fails: drivers/pinctrl/mediatek/pinctrl-moore.o: In function `mtk_gpio_set_config': pinctrl-moore.c:(.text+0xa6c): undefined reference to `mtk_eint_set_debounce' drivers/pinctrl/mediatek/pinctrl-moore.o: In function `mtk_gpio_to_irq': pinctrl-moore.c:(.text+0xacc): undefined reference to `mtk_eint_find_irq' Select EINT_MTK for PINCTRL_MTK_V2 to fix this. Fixes: 8174a8512e3e ("pinctrl: mediatek: make MediaTek pinctrl v2 driver ready for buidling loadable module") Signed-off-by: YueHaibing <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2022-04-21xfs: reorder iunlink remove operation in xfs_ifreeDave Chinner1-11/+13
The O_TMPFILE creation implementation creates a specific order of operations for inode allocation/freeing and unlinked list modification. Currently both are serialised by the AGI, so the order doesn't strictly matter as long as the are both in the same transaction. However, if we want to move the unlinked list insertions largely out from under the AGI lock, then we have to be concerned about the order in which we do unlinked list modification operations. O_TMPFILE creation tells us this order is inode allocation/free, then unlinked list modification. Change xfs_ifree() to use this same ordering on unlinked list removal. This way we always guarantee that when we enter the iunlinked list removal code from this path, we already have the AGI locked and we don't have to worry about lock nesting AGI reads inside unlink list locks because it's already locked and attached to the transaction. We can do this safely as the inode freeing and unlinked list removal are done in the same transaction and hence are atomic operations with respect to log recovery. Reported-by: Frank Hofmann <[email protected]> Fixes: 298f7bec503f ("xfs: pin inode backing buffer to the inode log item") Signed-off-by: Dave Chinner <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Signed-off-by: Dave Chinner <[email protected]>
2022-04-21MAINTAINERS: update IOMAP FILESYSTEM LIBRARY and XFS FILESYSTEMTiezhu Yang1-3/+0
In IOMAP FILESYSTEM LIBRARY and XFS FILESYSTEM, the M(ail): entry is redundant with the L(ist): entry, remove the redundant M(ail): entry. Signed-off-by: Tiezhu Yang <[email protected]> Reviewed-by: Darrick J. Wong <[email protected]> Reviewed-by: Chaitanya Kulkarni <[email protected]> Signed-off-by: Dave Chinner <[email protected]>
2022-04-21xfs: convert buffer flags to unsigned.Dave Chinner3-25/+25
5.18 w/ std=gnu11 compiled with gcc-5 wants flags stored in unsigned fields to be unsigned. This manifests as a compiler error such as: /kisskb/src/fs/xfs/./xfs_trace.h:432:2: note: in expansion of macro 'TP_printk' TP_printk("dev %d:%d daddr 0x%llx bbcount 0x%x hold %d pincount %d " ^ /kisskb/src/fs/xfs/./xfs_trace.h:440:5: note: in expansion of macro '__print_flags' __print_flags(__entry->flags, "|", XFS_BUF_FLAGS), ^ /kisskb/src/fs/xfs/xfs_buf.h:67:4: note: in expansion of macro 'XBF_UNMAPPED' { XBF_UNMAPPED, "UNMAPPED" } ^ /kisskb/src/fs/xfs/./xfs_trace.h:440:40: note: in expansion of macro 'XFS_BUF_FLAGS' __print_flags(__entry->flags, "|", XFS_BUF_FLAGS), ^ /kisskb/src/fs/xfs/./xfs_trace.h: In function 'trace_raw_output_xfs_buf_flags_class': /kisskb/src/fs/xfs/xfs_buf.h:46:23: error: initializer element is not constant #define XBF_UNMAPPED (1 << 31)/* do not map the buffer */ as __print_flags assigns XFS_BUF_FLAGS to a structure that uses an unsigned long for the flag. Since this results in the value of XBF_UNMAPPED causing a signed integer overflow, the result is technically undefined behavior, which gcc-5 does not accept as an integer constant. This is based on a patch from Arnd Bergman <[email protected]>. Reported-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Dave Chinner <[email protected]> Reviewed-by: Chandan Babu R <[email protected]> Signed-off-by: Dave Chinner <[email protected]>
2022-04-20xen: Convert kmap() to kmap_local_page()Alaa Mohamed1-2/+2
kmap() is being deprecated and these usages are all local to the thread so there is no reason kmap_local_page() can't be used. Replace kmap() calls with kmap_local_page(). Signed-off-by: Alaa Mohamed <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Boris Ostrovsky <[email protected]>
2022-04-20Merge tag 'xtensa-20220416' of https://github.com/jcmvbkbc/linux-xtensaLinus Torvalds3-11/+3
Pull xtensa fixes from Max Filippov: - fix patching CPU selection in patch_text - fix potential deadlock in ISS platform serial driver - fix potential register clobbering in coprocessor exception handler * tag 'xtensa-20220416' of https://github.com/jcmvbkbc/linux-xtensa: xtensa: fix a7 clobbering in coprocessor context load/store arch: xtensa: platforms: Fix deadlock in rs_close() xtensa: patch_text: Fixup last cpu should be master
2022-04-20Merge tag 'erofs-for-5.18-rc4-fixes' of ↵Linus Torvalds3-11/+8
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs Pull erofs fixes from Gao Xiang: "One patch to fix a use-after-free race related to the on-stack z_erofs_decompressqueue, which happens very rarely but needs to be fixed properly soon. The other patch fixes some sysfs Sphinx warnings" * tag 'erofs-for-5.18-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: Documentation/ABI: sysfs-fs-erofs: Fix Sphinx errors erofs: fix use-after-free of on-stack io[]
2022-04-20Revert "fs/pipe: use kvcalloc to allocate a pipe_buffer array"Linus Torvalds1-4/+5
This reverts commit 5a519c8fe4d620912385f94372fc8472fa98c662. It turns out that making the pipe almost arbitrarily large has some rather unexpected downsides. The kernel test robot reports a kernel warning that is due to pipe->max_usage now growing to the point where the iter_file_splice_write() buffer allocation can no longer be satisfied as a slab allocation, and the int nbufs = pipe->max_usage; struct bio_vec *array = kcalloc(nbufs, sizeof(struct bio_vec), GFP_KERNEL); code sequence there will now always fail as a result. That code could be modified to use kvcalloc() too, but I feel very uncomfortable making those kinds of changes for a very niche use case that really should have other options than make these kinds of fundamental changes to pipe behavior. Maybe the CRIU process dumping should be multi-threaded, and use multiple pipes and multiple cores, rather than try to use one larger pipe to minimize splice() calls. Reported-by: kernel test robot <[email protected]> Link: https://lore.kernel.org/all/20220420073717.GD16310@xsang-OptiPlex-9020/ Cc: Andrei Vagin <[email protected]> Cc: Dmitry Safonov <[email protected]> Cc: Alexander Viro <[email protected]> Cc: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-04-20x86: __memcpy_flushcache: fix wrong alignment if size > 2^32Mikulas Patocka1-1/+1
The first "if" condition in __memcpy_flushcache is supposed to align the "dest" variable to 8 bytes and copy data up to this alignment. However, this condition may misbehave if "size" is greater than 4GiB. The statement min_t(unsigned, size, ALIGN(dest, 8) - dest); casts both arguments to unsigned int and selects the smaller one. However, the cast truncates high bits in "size" and it results in misbehavior. For example: suppose that size == 0x100000001, dest == 0x200000002 min_t(unsigned, size, ALIGN(dest, 8) - dest) == min_t(0x1, 0xe) == 0x1; ... dest += 0x1; so we copy just one byte "and" dest remains unaligned. This patch fixes the bug by replacing unsigned with size_t. Signed-off-by: Mikulas Patocka <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2022-04-20f2fs: fix wrong condition check when failing metapage readJaegeuk Kim1-3/+3
This patch fixes wrong initialization. Fixes: 50c63009f6ab ("f2fs: avoid an infinite loop in f2fs_sync_dirty_inodes") Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
2022-04-20f2fs: keep io_flags to avoid IO split due to different op_flags in two fio ↵Jaegeuk Kim1-12/+21
holders Let's attach io_flags to bio only, so that we can merge IOs given original io_flags only. Fixes: 64bf0eef0171 ("f2fs: pass the bio operation to bio_alloc_bioset") Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
2022-04-20f2fs: remove obsolete whint_modeJaegeuk Kim4-205/+1
This patch removes obsolete whint_mode. Fixes: 41d36a9f3e53 ("fs: remove kiocb.ki_hint") Reviewed-by: Chao Yu <[email protected]> Signed-off-by: Jaegeuk Kim <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.