aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-05-20KVM: Free new dirty bitmap if creating a new memslot failsSean Christopherson1-1/+1
Fix a goof in kvm_prepare_memory_region() where KVM fails to free the new memslot's dirty bitmap during a CREATE action if kvm_arch_prepare_memory_region() fails. The logic is supposed to detect if the bitmap was allocated and thus needs to be freed, versus if the bitmap was inherited from the old memslot and thus needs to be kept. If there is no old memslot, then obviously the bitmap can't have been inherited The bug was exposed by commit 86931ff7207b ("KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDR"), which made it trivally easy for syzkaller to trigger failure during kvm_arch_prepare_memory_region(), but the bug can be hit other ways too, e.g. due to -ENOMEM when allocating x86's memslot metadata. The backtrace from kmemleak: __vmalloc_node_range+0xb40/0xbd0 mm/vmalloc.c:3195 __vmalloc_node mm/vmalloc.c:3232 [inline] __vmalloc+0x49/0x50 mm/vmalloc.c:3246 __vmalloc_array mm/util.c:671 [inline] __vcalloc+0x49/0x70 mm/util.c:694 kvm_alloc_dirty_bitmap virt/kvm/kvm_main.c:1319 kvm_prepare_memory_region virt/kvm/kvm_main.c:1551 kvm_set_memslot+0x1bd/0x690 virt/kvm/kvm_main.c:1782 __kvm_set_memory_region+0x689/0x750 virt/kvm/kvm_main.c:1949 kvm_set_memory_region virt/kvm/kvm_main.c:1962 kvm_vm_ioctl_set_memory_region virt/kvm/kvm_main.c:1974 kvm_vm_ioctl+0x377/0x13a0 virt/kvm/kvm_main.c:4528 vfs_ioctl fs/ioctl.c:51 __do_sys_ioctl fs/ioctl.c:870 __se_sys_ioctl fs/ioctl.c:856 __x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856 do_syscall_x64 arch/x86/entry/common.c:50 do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae And the relevant sequence of KVM events: ioctl(3, KVM_CREATE_VM, 0) = 4 ioctl(4, KVM_SET_USER_MEMORY_REGION, {slot=0, flags=KVM_MEM_LOG_DIRTY_PAGES, guest_phys_addr=0x10000000000000, memory_size=4096, userspace_addr=0x20fe8000} ) = -1 EINVAL (Invalid argument) Fixes: 244893fa2859 ("KVM: Dynamically allocate "new" memslots from the get-go") Cc: [email protected] Reported-by: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-20KVM: eventfd: Fix false positive RCU usage warningWanpeng Li1-1/+2
The splat below can be seen when running kvm-unit-test: ============================= WARNING: suspicious RCU usage 5.18.0-rc7 #5 Tainted: G IOE ----------------------------- /home/kernel/linux/arch/x86/kvm/../../../virt/kvm/eventfd.c:80 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 4 locks held by qemu-system-x86/35124: #0: ffff9725391d80b8 (&vcpu->mutex){+.+.}-{4:4}, at: kvm_vcpu_ioctl+0x77/0x710 [kvm] #1: ffffbd25cfb2a0b8 (&kvm->srcu){....}-{0:0}, at: vcpu_enter_guest+0xdeb/0x1900 [kvm] #2: ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: kvm_hv_notify_acked_sint+0x79/0x1e0 [kvm] #3: ffffbd25cfb2b920 (&kvm->irq_srcu){....}-{0:0}, at: irqfd_resampler_ack+0x5/0x110 [kvm] stack backtrace: CPU: 2 PID: 35124 Comm: qemu-system-x86 Tainted: G IOE 5.18.0-rc7 #5 Call Trace: <TASK> dump_stack_lvl+0x6c/0x9b irqfd_resampler_ack+0xfd/0x110 [kvm] kvm_notify_acked_gsi+0x32/0x90 [kvm] kvm_hv_notify_acked_sint+0xc5/0x1e0 [kvm] kvm_hv_set_msr_common+0xec1/0x1160 [kvm] kvm_set_msr_common+0x7c3/0xf60 [kvm] vmx_set_msr+0x394/0x1240 [kvm_intel] kvm_set_msr_ignored_check+0x86/0x200 [kvm] kvm_emulate_wrmsr+0x4f/0x1f0 [kvm] vmx_handle_exit+0x6fb/0x7e0 [kvm_intel] vcpu_enter_guest+0xe5a/0x1900 [kvm] kvm_arch_vcpu_ioctl_run+0x16e/0xac0 [kvm] kvm_vcpu_ioctl+0x279/0x710 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x3b/0x90 entry_SYSCALL_64_after_hwframe+0x44/0xae resampler-list is protected by irq_srcu (see kvm_irqfd_assign), so fix the false positive by using list_for_each_entry_srcu(). Signed-off-by: Wanpeng Li <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-20selftests: kvm/x86: Verify the pmu event filter matches the correct eventAaron Lewis1-0/+19
Add a test to demonstrate that when the guest programs an event select it is matched correctly in the pmu event filter and not inadvertently filtered. This could happen on AMD if the high nybble[1] in the event select gets truncated away only leaving the bottom byte[2] left for matching. This is a contrived example used for the convenience of demonstrating this issue, however, this can be applied to event selects 0x28A (OC Mode Switch) and 0x08A (L1 BTB Correction), where 0x08A could end up being denied when the event select was only set up to deny 0x28A. [1] bits 35:32 in the event select register and bits 11:8 in the event select. [2] bits 7:0 in the event select register and bits 7:0 in the event select. Signed-off-by: Aaron Lewis <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-20selftests: kvm/x86: Add the helper function create_pmu_event_filterAaron Lewis1-4/+14
Add a helper function that creates a pmu event filter given an event list. Currently, a pmu event filter can only be created with the same hard coded event list. Add a way to create one given a different event list. Also, rename make_pmu_event_filter to alloc_pmu_event_filter to clarify it's purpose given the introduction of create_pmu_event_filter. No functional changes intended. Signed-off-by: Aaron Lewis <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-20kvm: x86/pmu: Fix the compare function used by the pmu event filterAaron Lewis1-2/+5
When returning from the compare function the u64 is truncated to an int. This results in a loss of the high nybble[1] in the event select and its sign if that nybble is in use. Switch from using a result that can end up being truncated to a result that can only be: 1, 0, -1. [1] bits 35:32 in the event select register and bits 11:8 in the event select. Fixes: 7ff775aca48ad ("KVM: x86/pmu: Use binary search to check filtered events") Signed-off-by: Aaron Lewis <[email protected]> Reviewed-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-17Merge tag 'kvmarm-fixes-5.18-3' of ↵Paolo Bonzini2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.18, take #3 - Correctly expose GICv3 support even if no irqchip is created so that userspace doesn't observe it changing pointlessly (fixing a regression with QEMU) - Don't issue a hypercall to set the id-mapped vectors when protected mode is enabled (fix for pKVM in combination with CPUs affected by Spectre-v3a)
2022-05-15KVM: arm64: Don't hypercall before EL2 initQuentin Perret1-1/+2
Will reported the following splat when running with Protected KVM enabled: [ 2.427181] ------------[ cut here ]------------ [ 2.427668] WARNING: CPU: 3 PID: 1 at arch/arm64/kvm/mmu.c:489 __create_hyp_private_mapping+0x118/0x1ac [ 2.428424] Modules linked in: [ 2.429040] CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.18.0-rc2-00084-g8635adc4efc7 #1 [ 2.429589] Hardware name: QEMU QEMU Virtual Machine, BIOS 0.0.0 02/06/2015 [ 2.430286] pstate: 80000005 (Nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 2.430734] pc : __create_hyp_private_mapping+0x118/0x1ac [ 2.431091] lr : create_hyp_exec_mappings+0x40/0x80 [ 2.431377] sp : ffff80000803baf0 [ 2.431597] x29: ffff80000803bb00 x28: 0000000000000000 x27: 0000000000000000 [ 2.432156] x26: 0000000000000000 x25: 0000000000000000 x24: 0000000000000000 [ 2.432561] x23: ffffcd96c343b000 x22: 0000000000000000 x21: ffff80000803bb40 [ 2.433004] x20: 0000000000000004 x19: 0000000000001800 x18: 0000000000000000 [ 2.433343] x17: 0003e68cf7efdd70 x16: 0000000000000004 x15: fffffc81f602a2c8 [ 2.434053] x14: ffffdf8380000000 x13: ffffcd9573200000 x12: ffffcd96c343b000 [ 2.434401] x11: 0000000000000004 x10: ffffcd96c1738000 x9 : 0000000000000004 [ 2.434812] x8 : ffff80000803bb40 x7 : 7f7f7f7f7f7f7f7f x6 : 544f422effff306b [ 2.435136] x5 : 000000008020001e x4 : ffff207d80a88c00 x3 : 0000000000000005 [ 2.435480] x2 : 0000000000001800 x1 : 000000014f4ab800 x0 : 000000000badca11 [ 2.436149] Call trace: [ 2.436600] __create_hyp_private_mapping+0x118/0x1ac [ 2.437576] create_hyp_exec_mappings+0x40/0x80 [ 2.438180] kvm_init_vector_slots+0x180/0x194 [ 2.458941] kvm_arch_init+0x80/0x274 [ 2.459220] kvm_init+0x48/0x354 [ 2.459416] arm_init+0x20/0x2c [ 2.459601] do_one_initcall+0xbc/0x238 [ 2.459809] do_initcall_level+0x94/0xb4 [ 2.460043] do_initcalls+0x54/0x94 [ 2.460228] do_basic_setup+0x1c/0x28 [ 2.460407] kernel_init_freeable+0x110/0x178 [ 2.460610] kernel_init+0x20/0x1a0 [ 2.460817] ret_from_fork+0x10/0x20 [ 2.461274] ---[ end trace 0000000000000000 ]--- Indeed, the Protected KVM mode promotes __create_hyp_private_mapping() to a hypercall as EL1 no longer has access to the hypervisor's stage-1 page-table. However, the call from kvm_init_vector_slots() happens after pKVM has been initialized on the primary CPU, but before it has been initialized on secondaries. As such, if the KVM initcall procedure is migrated from one CPU to another in this window, the hypercall may end up running on a CPU for which EL2 has not been initialized. Fortunately, the pKVM hypervisor doesn't rely on the host to re-map the vectors in the private range, so the hypercall in question is in fact superfluous. Skip it when pKVM is enabled. Reported-by: Will Deacon <[email protected]> Signed-off-by: Quentin Perret <[email protected]> [maz: simplified the checks slightly] Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-05-15KVM: arm64: vgic-v3: Consistently populate ID_AA64PFR0_EL1.GICMarc Zyngier1-2/+1
When adding support for the slightly wonky Apple M1, we had to populate ID_AA64PFR0_EL1.GIC==1 to present something to the guest, as the HW itself doesn't advertise the feature. However, we gated this on the in-kernel irqchip being created. This causes some trouble for QEMU, which snapshots the state of the registers before creating a virtual GIC, and then tries to restore these registers once the GIC has been created. Obviously, between the two stages, ID_AA64PFR0_EL1.GIC has changed value, and the write fails. The fix is to actually emulate the HW, and always populate the field if the HW is capable of it. Fixes: 562e530fd770 ("KVM: arm64: Force ID_AA64PFR0_EL1.GIC=1 when exposing a virtual GICv3") Cc: [email protected] Signed-off-by: Marc Zyngier <[email protected]> Reported-by: Peter Maydell <[email protected]> Reviewed-by: Oliver Upton <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-05-12KVM: x86/mmu: Update number of zapped pages even if page list is stableSean Christopherson1-4/+6
When zapping obsolete pages, update the running count of zapped pages regardless of whether or not the list has become unstable due to zapping a shadow page with its own child shadow pages. If the VM is backed by mostly 4kb pages, KVM can zap an absurd number of SPTEs without bumping the batch count and thus without yielding. In the worst case scenario, this can cause a soft lokcup. watchdog: BUG: soft lockup - CPU#12 stuck for 22s! [dirty_log_perf_:13020] RIP: 0010:workingset_activation+0x19/0x130 mark_page_accessed+0x266/0x2e0 kvm_set_pfn_accessed+0x31/0x40 mmu_spte_clear_track_bits+0x136/0x1c0 drop_spte+0x1a/0xc0 mmu_page_zap_pte+0xef/0x120 __kvm_mmu_prepare_zap_page+0x205/0x5e0 kvm_mmu_zap_all_fast+0xd7/0x190 kvm_mmu_invalidate_zap_pages_in_memslot+0xe/0x10 kvm_page_track_flush_slot+0x5c/0x80 kvm_arch_flush_shadow_memslot+0xe/0x10 kvm_set_memslot+0x1a8/0x5d0 __kvm_set_memory_region+0x337/0x590 kvm_vm_ioctl+0xb08/0x1040 Fixes: fbb158cb88b6 ("KVM: x86/mmu: Revert "Revert "KVM: MMU: zap pages in batch""") Reported-by: David Matlack <[email protected]> Reviewed-by: Ben Gardon <[email protected]> Cc: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-06KVM: VMX: Exit to userspace if vCPU has injected exception and invalid stateSean Christopherson1-1/+1
Exit to userspace with an emulation error if KVM encounters an injected exception with invalid guest state, in addition to the existing check of bailing if there's a pending exception (KVM doesn't support emulating exceptions except when emulating real mode via vm86). In theory, KVM should never get to such a situation as KVM is supposed to exit to userspace before injecting an exception with invalid guest state. But in practice, userspace can intervene and manually inject an exception and/or stuff registers to force invalid guest state while a previously injected exception is awaiting reinjection. Fixes: fc4fad79fc3d ("KVM: VMX: Reject KVM_RUN if emulation is required with pending exception") Reported-by: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-06KVM: SEV: Mark nested locking of vcpu->lockPeter Gonda1-4/+38
svm_vm_migrate_from() uses sev_lock_vcpus_for_migration() to lock all source and target vcpu->locks. Unfortunately there is an 8 subclass limit, so a new subclass cannot be used for each vCPU. Instead maintain ownership of the first vcpu's mutex.dep_map using a role specific subclass: source vs target. Release the other vcpu's mutex.dep_maps. Fixes: b56639318bb2b ("KVM: SEV: Add support for SEV intra host migration") Reported-by: John Sperbeck<[email protected]> Suggested-by: David Rientjes <[email protected]> Suggested-by: Sean Christopherson <[email protected]> Suggested-by: Paolo Bonzini <[email protected]> Cc: Hillf Danton <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Peter Gonda <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-03Merge branch 'kvm-amd-pmu-fixes' into HEADPaolo Bonzini2-3/+30
2022-05-03kvm: x86/cpuid: Only provide CPUID leaf 0xA if host has architectural PMUSandipan Das1-0/+5
On some x86 processors, CPUID leaf 0xA provides information on Architectural Performance Monitoring features. It advertises a PMU version which Qemu uses to determine the availability of additional MSRs to manage the PMCs. Upon receiving a KVM_GET_SUPPORTED_CPUID ioctl request for the same, the kernel constructs return values based on the x86_pmu_capability irrespective of the vendor. This leaf and the additional MSRs are not supported on AMD and Hygon processors. If AMD PerfMonV2 is detected, the PMU version is set to 2 and guest startup breaks because of an attempt to access a non-existent MSR. Return zeros to avoid this. Fixes: a6c06ed1a60a ("KVM: Expose the architectural performance monitoring CPUID leaf") Reported-by: Vasant Hegde <[email protected]> Signed-off-by: Sandipan Das <[email protected]> Message-Id: <3fef83d9c2b2f7516e8ff50d60851f29a4bcb716.1651058600.git.sandipan.das@amd.com> Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-03KVM: x86/svm: Account for family 17h event renumberings in amd_pmc_perf_hw_idKyle Huey1-3/+25
Zen renumbered some of the performance counters that correspond to the well known events in perf_hw_id. This code in KVM was never updated for that, so guest that attempt to use counters on Zen that correspond to the pre-Zen perf_hw_id values will silently receive the wrong values. This has been observed in the wild with rr[0] when running in Zen 3 guests. rr uses the retired conditional branch counter 00d1 which is incorrectly recognized by KVM as PERF_COUNT_HW_STALLED_CYCLES_BACKEND. [0] https://rr-project.org/ Signed-off-by: Kyle Huey <[email protected]> Message-Id: <[email protected]> Cc: [email protected] [Check guest family, not host. - Paolo] Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-03Merge branch 'kvm-tdp-mmu-atomicity-fix' into HEADPaolo Bonzini5-61/+121
We are dropping A/D bits (and W bits) in the TDP MMU. Even if mmu_lock is held for write, as volatile SPTEs can be written by other tasks/vCPUs outside of mmu_lock. Attempting to prove that bug exposed another notable goof, which has been lurking for a decade, give or take: KVM treats _all_ MMU-writable SPTEs as volatile, even though KVM never clears WRITABLE outside of MMU lock. As a result, the legacy MMU (and the TDP MMU if not fixed) uses XCHG to update writable SPTEs. The fix does not seem to have an easily-measurable affect on performance; page faults are so slow that wasting even a few hundred cycles is dwarfed by the base cost.
2022-05-03KVM: x86/mmu: Use atomic XCHG to write TDP MMU SPTEs with volatile bitsSean Christopherson2-31/+85
Use an atomic XCHG to write TDP MMU SPTEs that have volatile bits, even if mmu_lock is held for write, as volatile SPTEs can be written by other tasks/vCPUs outside of mmu_lock. If a vCPU uses the to-be-modified SPTE to write a page, the CPU can cache the translation as WRITABLE in the TLB despite it being seen by KVM as !WRITABLE, and/or KVM can clobber the Accessed/Dirty bits and not properly tag the backing page. Exempt non-leaf SPTEs from atomic updates as KVM itself doesn't modify non-leaf SPTEs without holding mmu_lock, they do not have Dirty bits, and KVM doesn't consume the Accessed bit of non-leaf SPTEs. Dropping the Dirty and/or Writable bits is most problematic for dirty logging, as doing so can result in a missed TLB flush and eventually a missed dirty page. In the unlikely event that the only dirty page(s) is a clobbered SPTE, clear_dirty_gfn_range() will see the SPTE as not dirty (based on the Dirty or Writable bit depending on the method) and so not update the SPTE and ultimately not flush. If the SPTE is cached in the TLB as writable before it is clobbered, the guest can continue writing the associated page without ever taking a write-protect fault. For most (all?) file back memory, dropping the Dirty bit is a non-issue. The primary MMU write-protects its PTEs on writeback, i.e. KVM's dirty bit is effectively ignored because the primary MMU will mark that page dirty when the write-protection is lifted, e.g. when KVM faults the page back in for write. The Accessed bit is a complete non-issue. Aside from being unused for non-leaf SPTEs, KVM doesn't do a TLB flush when aging SPTEs, i.e. the Accessed bit may be dropped anyways. Lastly, the Writable bit is also problematic as an extension of the Dirty bit, as KVM (correctly) treats the Dirty bit as volatile iff the SPTE is !DIRTY && WRITABLE. If KVM fixes an MMU-writable, but !WRITABLE, SPTE out of mmu_lock, then it can allow the CPU to set the Dirty bit despite the SPTE being !WRITABLE when it is checked by KVM. But that all depends on the Dirty bit being problematic in the first place. Fixes: 2f2fad0897cb ("kvm: x86/mmu: Add functions to handle changed TDP SPTEs") Cc: [email protected] Cc: Ben Gardon <[email protected]> Cc: David Matlack <[email protected]> Cc: Venkatesh Srinivas <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-03KVM: x86/mmu: Move shadow-present check out of spte_has_volatile_bits()Sean Christopherson3-27/+32
Move the is_shadow_present_pte() check out of spte_has_volatile_bits() and into its callers. Well, caller, since only one of its two callers doesn't already do the shadow-present check. Opportunistically move the helper to spte.c/h so that it can be used by the TDP MMU, which is also the primary motivation for the shadow-present change. Unlike the legacy MMU, the TDP MMU uses a single path for clear leaf and non-leaf SPTEs, and to avoid unnecessary atomic updates, the TDP MMU will need to check is_last_spte() prior to calling spte_has_volatile_bits(), and calling is_last_spte() without first calling is_shadow_present_spte() is at best odd, and at worst a violation of KVM's loosely defines SPTE rules. Note, mmu_spte_clear_track_bits() could likely skip the write entirely for SPTEs that are not shadow-present. Leave that cleanup for a future patch to avoid introducing a functional change, and because the shadow-present check can likely be moved further up the stack, e.g. drop_large_spte() appears to be the only path that doesn't already explicitly check for a shadow-present SPTE. No functional change intended. Cc: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-05-03KVM: x86/mmu: Don't treat fully writable SPTEs as volatile (modulo A/D)Sean Christopherson2-9/+10
Don't treat SPTEs that are truly writable, i.e. writable in hardware, as being volatile (unless they're volatile for other reasons, e.g. A/D bits). KVM _sets_ the WRITABLE bit out of mmu_lock, but never _clears_ the bit out of mmu_lock, so if the WRITABLE bit is set, it cannot magically get cleared just because the SPTE is MMU-writable. Rename the wrapper of MMU-writable to be more literal, the previous name of spte_can_locklessly_be_made_writable() is wrong and misleading. Fixes: c7ba5b48cc8d ("KVM: MMU: fast path of handling guest page fault") Cc: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-29KVM: x86: work around QEMU issue with synthetic CPUID leavesPaolo Bonzini1-5/+14
Synthesizing AMD leaves up to 0x80000021 caused problems with QEMU, which assumes the *host* CPUID[0x80000000].EAX is higher or equal to what KVM_GET_SUPPORTED_CPUID reports. This causes QEMU to issue bogus host CPUIDs when preparing the input to KVM_SET_CPUID2. It can even get into an infinite loop, which is only terminated by an abort(): cpuid_data is full, no space for cpuid(eax:0x8000001d,ecx:0x3e) To work around this, only synthesize those leaves if 0x8000001d exists on the host. The synthetic 0x80000021 leaf is mostly useful on Zen2, which satisfies the condition. Fixes: f144c49e8c39 ("KVM: x86: synthesize CPUID leaf 0x80000021h if useful") Reported-by: Maxim Levitsky <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-29Revert "x86/mm: Introduce lookup_address_in_mm()"Sean Christopherson2-15/+0
Drop lookup_address_in_mm() now that KVM is providing it's own variant of lookup_address_in_pgd() that is safe for use with user addresses, e.g. guards against page tables being torn down. A variant that provides a non-init mm is inherently dangerous and flawed, as the only reason to use an mm other than init_mm is to walk a userspace mapping, and lookup_address_in_pgd() does not play nice with userspace mappings, e.g. doesn't disable IRQs to block TLB shootdowns and doesn't use READ_ONCE() to ensure an upper level entry isn't converted to a huge page between checking the PAGE_SIZE bit and grabbing the address of the next level down. This reverts commit 13c72c060f1ba6f4eddd7b1c4f52a8aded43d6d9. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <YmwIi3bXr/1yhYV/@google.com> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-29Merge branch 'kvm-fixes-for-5.18-rc5' into HEADPaolo Bonzini10-32/+121
Fixes for (relatively) old bugs, to be merged in both the -rc and next development trees: * Fix potential races when walking host page table * Fix bad user ABI for KVM_EXIT_SYSTEM_EVENT * Fix shadow page table leak when KVM runs nested
2022-04-29KVM: x86/mmu: fix potential races when walking host page tableMingwei Zhang1-5/+42
KVM uses lookup_address_in_mm() to detect the hugepage size that the host uses to map a pfn. The function suffers from several issues: - no usage of READ_ONCE(*). This allows multiple dereference of the same page table entry. The TOCTOU problem because of that may cause KVM to incorrectly treat a newly generated leaf entry as a nonleaf one, and dereference the content by using its pfn value. - the information returned does not match what KVM needs; for non-present entries it returns the level at which the walk was terminated, as long as the entry is not 'none'. KVM needs level information of only 'present' entries, otherwise it may regard a non-present PXE entry as a present large page mapping. - the function is not safe for mappings that can be torn down, because it does not disable IRQs and because it returns a PTE pointer which is never safe to dereference after the function returns. So implement the logic for walking host page tables directly in KVM, and stop using lookup_address_in_mm(). Cc: Sean Christopherson <[email protected]> Cc: Paolo Bonzini <[email protected]> Signed-off-by: Mingwei Zhang <[email protected]> Message-Id: <[email protected]> [Inline in host_pfn_mapping_level, ensure no semantic change for its callers. - Paolo] Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-29KVM: fix bad user ABI for KVM_EXIT_SYSTEM_EVENTPaolo Bonzini6-11/+34
When KVM_EXIT_SYSTEM_EVENT was introduced, it included a flags member that at the time was unused. Unfortunately this extensibility mechanism has several issues: - x86 is not writing the member, so it would not be possible to use it on x86 except for new events - the member is not aligned to 64 bits, so the definition of the uAPI struct is incorrect for 32- on 64-bit userspace. This is a problem for RISC-V, which supports CONFIG_KVM_COMPAT, but fortunately usage of flags was only introduced in 5.18. Since padding has to be introduced, place a new field in there that tells if the flags field is valid. To allow further extensibility, in fact, change flags to an array of 16 values, and store how many of the values are valid. The availability of the new ndata field is tied to a system capability; all architectures are changed to fill in the field. To avoid breaking compilation of userspace that was using the flags field, provide a userspace-only union to overlap flags with data[0]. The new field is placed at the same offset for both 32- and 64-bit userspace. Cc: Will Deacon <[email protected]> Cc: Marc Zyngier <[email protected]> Cc: Peter Gonda <[email protected]> Cc: Sean Christopherson <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]> Reported-by: kernel test robot <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-29KVM: x86/mmu: Do not create SPTEs for GFNs that exceed host.MAXPHYADDRSean Christopherson5-16/+45
Disallow memslots and MMIO SPTEs whose gpa range would exceed the host's MAXPHYADDR, i.e. don't create SPTEs for gfns that exceed host.MAXPHYADDR. The TDP MMU bounds its zapping based on host.MAXPHYADDR, and so if the guest, possibly with help from userspace, manages to coerce KVM into creating a SPTE for an "impossible" gfn, KVM will leak the associated shadow pages (page tables): WARNING: CPU: 10 PID: 1122 at arch/x86/kvm/mmu/tdp_mmu.c:57 kvm_mmu_uninit_tdp_mmu+0x4b/0x60 [kvm] Modules linked in: kvm_intel kvm irqbypass CPU: 10 PID: 1122 Comm: set_memory_regi Tainted: G W 5.18.0-rc1+ #293 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:kvm_mmu_uninit_tdp_mmu+0x4b/0x60 [kvm] Call Trace: <TASK> kvm_arch_destroy_vm+0x130/0x1b0 [kvm] kvm_destroy_vm+0x162/0x2d0 [kvm] kvm_vm_release+0x1d/0x30 [kvm] __fput+0x82/0x240 task_work_run+0x5b/0x90 exit_to_user_mode_prepare+0xd2/0xe0 syscall_exit_to_user_mode+0x1d/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> On bare metal, encountering an impossible gpa in the page fault path is well and truly impossible, barring CPU bugs, as the CPU will signal #PF during the gva=>gpa translation (or a similar failure when stuffing a physical address into e.g. the VMCS/VMCB). But if KVM is running as a VM itself, the MAXPHYADDR enumerated to KVM may not be the actual MAXPHYADDR of the underlying hardware, in which case the hardware will not fault on the illegal-from-KVM's-perspective gpa. Alternatively, KVM could continue allowing the dodgy behavior and simply zap the max possible range. But, for hosts with MAXPHYADDR < 52, that's a (minor) waste of cycles, and more importantly, KVM can't reasonably support impossible memslots when running on bare metal (or with an accurate MAXPHYADDR as a VM). Note, limiting the overhead by checking if KVM is running as a guest is not a safe option as the host isn't required to announce itself to the guest in any way, e.g. doesn't need to set the HYPERVISOR CPUID bit. A second alternative to disallowing the memslot behavior would be to disallow creating a VM with guest.MAXPHYADDR > host.MAXPHYADDR. That restriction is undesirable as there are legitimate use cases for doing so, e.g. using the highest host.MAXPHYADDR out of a pool of heterogeneous systems so that VMs can be migrated between hosts with different MAXPHYADDRs without running afoul of the allow_smaller_maxphyaddr mess. Note that any guest.MAXPHYADDR is valid with shadow paging, and it is even useful in order to test KVM with MAXPHYADDR=52 (i.e. without any reserved physical address bits). The now common kvm_mmu_max_gfn() is inclusive instead of exclusive. The memslot and TDP MMU code want an exclusive value, but the name implies the returned value is inclusive, and the MMIO path needs an inclusive check. Fixes: faaf05b00aec ("kvm: x86/mmu: Support zapping SPTEs in the TDP MMU") Fixes: 524a1e4e381f ("KVM: x86/mmu: Don't leak non-leaf SPTEs when zapping all SPTEs") Cc: [email protected] Cc: Maxim Levitsky <[email protected]> Cc: Ben Gardon <[email protected]> Cc: David Matlack <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-29Merge tag 'kvmarm-fixes-5.18-2' of ↵Paolo Bonzini5-10/+79
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.18, take #2 - Take care of faults occuring between the PARange and IPA range by injecting an exception - Fix S2 faults taken from a host EL0 in protected mode - Work around Oops caused by a PMU access from a 32bit guest when PMU has been created. This is a temporary bodge until we fix it for good.
2022-04-27KVM: arm64: Inject exception on out-of-IPA-range translation faultMarc Zyngier3-0/+48
When taking a translation fault for an IPA that is outside of the range defined by the hypervisor (between the HW PARange and the IPA range), we stupidly treat it as an IO and forward the access to userspace. Of course, userspace can't do much with it, and things end badly. Arguably, the guest is braindead, but we should at least catch the case and inject an exception. Check the faulting IPA against: - the sanitised PARange: inject an address size fault - the IPA size: inject an abort Reported-by: Christoffer Dall <[email protected]> Signed-off-by: Marc Zyngier <[email protected]>
2022-04-27KVM/arm64: Don't emulate a PMU for 32-bit guests if feature not setAlexandru Elisei1-1/+22
kvm->arch.arm_pmu is set when userspace attempts to set the first PMU attribute. As certain attributes are mandatory, arm_pmu ends up always being set to a valid arm_pmu, otherwise KVM will refuse to run the VCPU. However, this only happens if the VCPU has the PMU feature. If the VCPU doesn't have the feature bit set, kvm->arch.arm_pmu will be left uninitialized and equal to NULL. KVM doesn't do ID register emulation for 32-bit guests and accesses to the PMU registers aren't gated by the pmu_visibility() function. This is done to prevent injecting unexpected undefined exceptions in guests which have detected the presence of a hardware PMU. But even though the VCPU feature is missing, KVM still attempts to emulate certain aspects of the PMU when PMU registers are accessed. This leads to a NULL pointer dereference like this one, which happens on an odroid-c4 board when running the kvm-unit-tests pmu-cycle-counter test with kvmtool and without the PMU feature being set: [ 454.402699] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000150 [ 454.405865] Mem abort info: [ 454.408596] ESR = 0x96000004 [ 454.411638] EC = 0x25: DABT (current EL), IL = 32 bits [ 454.416901] SET = 0, FnV = 0 [ 454.419909] EA = 0, S1PTW = 0 [ 454.423010] FSC = 0x04: level 0 translation fault [ 454.427841] Data abort info: [ 454.430687] ISV = 0, ISS = 0x00000004 [ 454.434484] CM = 0, WnR = 0 [ 454.437404] user pgtable: 4k pages, 48-bit VAs, pgdp=000000000c924000 [ 454.443800] [0000000000000150] pgd=0000000000000000, p4d=0000000000000000 [ 454.450528] Internal error: Oops: 96000004 [#1] PREEMPT SMP [ 454.456036] Modules linked in: [ 454.459053] CPU: 1 PID: 267 Comm: kvm-vcpu-0 Not tainted 5.18.0-rc4 #113 [ 454.465697] Hardware name: Hardkernel ODROID-C4 (DT) [ 454.470612] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 454.477512] pc : kvm_pmu_event_mask.isra.0+0x14/0x74 [ 454.482427] lr : kvm_pmu_set_counter_event_type+0x2c/0x80 [ 454.487775] sp : ffff80000a9839c0 [ 454.491050] x29: ffff80000a9839c0 x28: ffff000000a83a00 x27: 0000000000000000 [ 454.498127] x26: 0000000000000000 x25: 0000000000000000 x24: ffff00000a510000 [ 454.505198] x23: ffff000000a83a00 x22: ffff000003b01000 x21: 0000000000000000 [ 454.512271] x20: 000000000000001f x19: 00000000000003ff x18: 0000000000000000 [ 454.519343] x17: 000000008003fe98 x16: 0000000000000000 x15: 0000000000000000 [ 454.526416] x14: 0000000000000000 x13: 0000000000000000 x12: 0000000000000000 [ 454.533489] x11: 000000008003fdbc x10: 0000000000009d20 x9 : 000000000000001b [ 454.540561] x8 : 0000000000000000 x7 : 0000000000000d00 x6 : 0000000000009d00 [ 454.547633] x5 : 0000000000000037 x4 : 0000000000009d00 x3 : 0d09000000000000 [ 454.554705] x2 : 000000000000001f x1 : 0000000000000000 x0 : 0000000000000000 [ 454.561779] Call trace: [ 454.564191] kvm_pmu_event_mask.isra.0+0x14/0x74 [ 454.568764] kvm_pmu_set_counter_event_type+0x2c/0x80 [ 454.573766] access_pmu_evtyper+0x128/0x170 [ 454.577905] perform_access+0x34/0x80 [ 454.581527] kvm_handle_cp_32+0x13c/0x160 [ 454.585495] kvm_handle_cp15_32+0x1c/0x30 [ 454.589462] handle_exit+0x70/0x180 [ 454.592912] kvm_arch_vcpu_ioctl_run+0x1c4/0x5e0 [ 454.597485] kvm_vcpu_ioctl+0x23c/0x940 [ 454.601280] __arm64_sys_ioctl+0xa8/0xf0 [ 454.605160] invoke_syscall+0x48/0x114 [ 454.608869] el0_svc_common.constprop.0+0xd4/0xfc [ 454.613527] do_el0_svc+0x28/0x90 [ 454.616803] el0_svc+0x34/0xb0 [ 454.619822] el0t_64_sync_handler+0xa4/0x130 [ 454.624049] el0t_64_sync+0x18c/0x190 [ 454.627675] Code: a9be7bfd 910003fd f9000bf3 52807ff3 (b9415001) [ 454.633714] ---[ end trace 0000000000000000 ]--- In this particular case, Linux hasn't detected the presence of a hardware PMU because the PMU node is missing from the DTB, so userspace would have been unable to set the VCPU PMU feature even if it attempted it. What happens is that the 32-bit guest reads ID_DFR0, which advertises the presence of the PMU, and when it tries to program a counter, it triggers the NULL pointer dereference because kvm->arch.arm_pmu is NULL. kvm-arch.arm_pmu was introduced by commit 46b187821472 ("KVM: arm64: Keep a per-VM pointer to the default PMU"). Until that commit, this error would be triggered instead: [ 73.388140] ------------[ cut here ]------------ [ 73.388189] Unknown PMU version 0 [ 73.390420] WARNING: CPU: 1 PID: 264 at arch/arm64/kvm/pmu-emul.c:36 kvm_pmu_event_mask.isra.0+0x6c/0x74 [ 73.399821] Modules linked in: [ 73.402835] CPU: 1 PID: 264 Comm: kvm-vcpu-0 Not tainted 5.17.0 #114 [ 73.409132] Hardware name: Hardkernel ODROID-C4 (DT) [ 73.414048] pstate: 60400009 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 73.420948] pc : kvm_pmu_event_mask.isra.0+0x6c/0x74 [ 73.425863] lr : kvm_pmu_event_mask.isra.0+0x6c/0x74 [ 73.430779] sp : ffff80000a8db9b0 [ 73.434055] x29: ffff80000a8db9b0 x28: ffff000000dbaac0 x27: 0000000000000000 [ 73.441131] x26: ffff000000dbaac0 x25: 00000000c600000d x24: 0000000000180720 [ 73.448203] x23: ffff800009ffbe10 x22: ffff00000b612000 x21: 0000000000000000 [ 73.455276] x20: 000000000000001f x19: 0000000000000000 x18: ffffffffffffffff [ 73.462348] x17: 000000008003fe98 x16: 0000000000000000 x15: 0720072007200720 [ 73.469420] x14: 0720072007200720 x13: ffff800009d32488 x12: 00000000000004e6 [ 73.476493] x11: 00000000000001a2 x10: ffff800009d32488 x9 : ffff800009d32488 [ 73.483565] x8 : 00000000ffffefff x7 : ffff800009d8a488 x6 : ffff800009d8a488 [ 73.490638] x5 : ffff0000f461a9d8 x4 : 0000000000000000 x3 : 0000000000000001 [ 73.497710] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000000dbaac0 [ 73.504784] Call trace: [ 73.507195] kvm_pmu_event_mask.isra.0+0x6c/0x74 [ 73.511768] kvm_pmu_set_counter_event_type+0x2c/0x80 [ 73.516770] access_pmu_evtyper+0x128/0x16c [ 73.520910] perform_access+0x34/0x80 [ 73.524532] kvm_handle_cp_32+0x13c/0x160 [ 73.528500] kvm_handle_cp15_32+0x1c/0x30 [ 73.532467] handle_exit+0x70/0x180 [ 73.535917] kvm_arch_vcpu_ioctl_run+0x20c/0x6e0 [ 73.540489] kvm_vcpu_ioctl+0x2b8/0x9e0 [ 73.544283] __arm64_sys_ioctl+0xa8/0xf0 [ 73.548165] invoke_syscall+0x48/0x114 [ 73.551874] el0_svc_common.constprop.0+0xd4/0xfc [ 73.556531] do_el0_svc+0x28/0x90 [ 73.559808] el0_svc+0x28/0x80 [ 73.562826] el0t_64_sync_handler+0xa4/0x130 [ 73.567054] el0t_64_sync+0x1a0/0x1a4 [ 73.570676] ---[ end trace 0000000000000000 ]--- [ 73.575382] kvm: pmu event creation failed -2 The root cause remains the same: kvm->arch.pmuver was never set to something sensible because the VCPU feature itself was never set. The odroid-c4 is somewhat of a special case, because Linux doesn't probe the PMU. But the above errors can easily be reproduced on any hardware, with or without a PMU driver, as long as userspace doesn't set the PMU feature. Work around the fact that KVM advertises a PMU even when the VCPU feature is not set by gating all PMU emulation on the feature. The guest can still access the registers without KVM injecting an undefined exception. Signed-off-by: Alexandru Elisei <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-27KVM: arm64: Handle host stage-2 faults from 32-bit EL0Will Deacon1-9/+9
When pKVM is enabled, host memory accesses are translated by an identity mapping at stage-2, which is populated lazily in response to synchronous exceptions from 64-bit EL1 and EL0. Extend this handling to cover exceptions originating from 32-bit EL0 as well. Although these are very unlikely to occur in practice, as the kernel typically ensures that user pages are initialised before mapping them in, drivers could still map previously untouched device pages into userspace and expect things to work rather than panic the system. Cc: Quentin Perret <[email protected]> Cc: Marc Zyngier <[email protected]> Signed-off-by: Will Deacon <[email protected]> Signed-off-by: Marc Zyngier <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-04-21kvm: selftests: introduce and use more page size-related constantsPaolo Bonzini8-13/+8
Clean up code that was hardcoding masks for various fields, now that the masks are included in processor.h. For more cleanup, define PAGE_SIZE and PAGE_MASK just like in Linux. PAGE_SIZE in particular was defined by several tests. Suggested-by: Sean Christopherson <[email protected]> Reviewed-by: Peter Xu <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21kvm: selftests: do not use bitfields larger than 32-bits for PTEsPaolo Bonzini2-115/+92
Red Hat's QE team reported test failure on access_tracking_perf_test: Testing guest mode: PA-bits:ANY, VA-bits:48, 4K pages guest physical test memory offset: 0x3fffbffff000 Populating memory : 0.684014577s Writing to populated memory : 0.006230175s Reading from populated memory : 0.004557805s ==== Test Assertion Failure ==== lib/kvm_util.c:1411: false pid=125806 tid=125809 errno=4 - Interrupted system call 1 0x0000000000402f7c: addr_gpa2hva at kvm_util.c:1411 2 (inlined by) addr_gpa2hva at kvm_util.c:1405 3 0x0000000000401f52: lookup_pfn at access_tracking_perf_test.c:98 4 (inlined by) mark_vcpu_memory_idle at access_tracking_perf_test.c:152 5 (inlined by) vcpu_thread_main at access_tracking_perf_test.c:232 6 0x00007fefe9ff81ce: ?? ??:0 7 0x00007fefe9c64d82: ?? ??:0 No vm physical memory at 0xffbffff000 I can easily reproduce it with a Intel(R) Xeon(R) CPU E5-2630 with 46 bits PA. It turns out that the address translation for clearing idle page tracking returned a wrong result; addr_gva2gpa()'s last step, which is based on "pte[index[0]].pfn", did the calculation with 40 bits length and the high 12 bits got truncated. In above case the GPA address to be returned should be 0x3fffbffff000 for GVA 0xc0000000, but it got truncated into 0xffbffff000 and the subsequent gpa2hva lookup failed. The width of operations on bit fields greater than 32-bit is implementation defined, and differs between GCC (which uses the bitfield precision) and clang (which uses 64-bit arithmetic), so this is a potential minefield. Remove the bit fields and using manual masking instead. Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=2075036 Reported-by: Nana Liu <[email protected]> Reviewed-by: Peter Xu <[email protected]> Tested-by: Peter Xu <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: SEV: add cache flush to solve SEV cache incoherency issuesMingwei Zhang8-3/+44
Flush the CPU caches when memory is reclaimed from an SEV guest (where reclaim also includes it being unmapped from KVM's memslots). Due to lack of coherency for SEV encrypted memory, failure to flush results in silent data corruption if userspace is malicious/broken and doesn't ensure SEV guest memory is properly pinned and unpinned. Cache coherency is not enforced across the VM boundary in SEV (AMD APM vol.2 Section 15.34.7). Confidential cachelines, generated by confidential VM guests have to be explicitly flushed on the host side. If a memory page containing dirty confidential cachelines was released by VM and reallocated to another user, the cachelines may corrupt the new user at a later time. KVM takes a shortcut by assuming all confidential memory remain pinned until the end of VM lifetime. Therefore, KVM does not flush cache at mmu_notifier invalidation events. Because of this incorrect assumption and the lack of cache flushing, malicous userspace can crash the host kernel: creating a malicious VM and continuously allocates/releases unpinned confidential memory pages when the VM is running. Add cache flush operations to mmu_notifier operations to ensure that any physical memory leaving the guest VM get flushed. In particular, hook mmu_notifier_invalidate_range_start and mmu_notifier_release events and flush cache accordingly. The hook after releasing the mmu lock to avoid contention with other vCPUs. Cc: [email protected] Suggested-by: Sean Christpherson <[email protected]> Reported-by: Mingwei Zhang <[email protected]> Signed-off-by: Mingwei Zhang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: SVM: Flush when freeing encrypted pages even on SME_COHERENT CPUsMingwei Zhang1-3/+6
Use clflush_cache_range() to flush the confidential memory when SME_COHERENT is supported in AMD CPU. Cache flush is still needed since SME_COHERENT only support cache invalidation at CPU side. All confidential cache lines are still incoherent with DMA devices. Cc: [email protected] Fixes: add5e2f04541 ("KVM: SVM: Add support for the SEV-ES VMSA") Reviewed-by: Sean Christopherson <[email protected]> Signed-off-by: Mingwei Zhang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: SVM: Simplify and harden helper to flush SEV guest page(s)Sean Christopherson1-34/+20
Rework sev_flush_guest_memory() to explicitly handle only a single page, and harden it to fall back to WBINVD if VM_PAGE_FLUSH fails. Per-page flushing is currently used only to flush the VMSA, and in its current form, the helper is completely broken with respect to flushing actual guest memory, i.e. won't work correctly for an arbitrary memory range. VM_PAGE_FLUSH takes a host virtual address, and is subject to normal page walks, i.e. will fault if the address is not present in the host page tables or does not have the correct permissions. Current AMD CPUs also do not honor SMAP overrides (undocumented in kernel versions of the APM), so passing in a userspace address is completely out of the question. In other words, KVM would need to manually walk the host page tables to get the pfn, ensure the pfn is stable, and then use the direct map to invoke VM_PAGE_FLUSH. And the latter might not even work, e.g. if userspace is particularly evil/clever and backs the guest with Secret Memory (which unmaps memory from the direct map). Signed-off-by: Sean Christopherson <[email protected]> Fixes: add5e2f04541 ("KVM: SVM: Add support for the SEV-ES VMSA") Reported-by: Mingwei Zhang <[email protected]> Cc: [email protected] Signed-off-by: Mingwei Zhang <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: selftests: Silence compiler warning in the kvm_page_table_testThomas Huth1-1/+1
When compiling kvm_page_table_test.c, I get this compiler warning with gcc 11.2: kvm_page_table_test.c: In function 'pre_init_before_test': ../../../../tools/include/linux/kernel.h:44:24: warning: comparison of distinct pointer types lacks a cast 44 | (void) (&_max1 == &_max2); \ | ^~ kvm_page_table_test.c:281:21: note: in expansion of macro 'max' 281 | alignment = max(0x100000, alignment); | ^~~ Fix it by adjusting the type of the absolute value. Signed-off-by: Thomas Huth <[email protected]> Reviewed-by: Claudio Imbrenda <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: x86/pmu: Update AMD PMC sample period to fix guest NMI-watchdogLike Xu3-6/+12
NMI-watchdog is one of the favorite features of kernel developers, but it does not work in AMD guest even with vPMU enabled and worse, the system misrepresents this capability via /proc. This is a PMC emulation error. KVM does not pass the latest valid value to perf_event in time when guest NMI-watchdog is running, thus the perf_event corresponding to the watchdog counter will enter the old state at some point after the first guest NMI injection, forcing the hardware register PMC0 to be constantly written to 0x800000000001. Meanwhile, the running counter should accurately reflect its new value based on the latest coordinated pmc->counter (from vPMC's point of view) rather than the value written directly by the guest. Fixes: 168d918f2643 ("KVM: x86: Adjust counter sample period after a wrmsr") Reported-by: Dongli Cao <[email protected]> Signed-off-by: Like Xu <[email protected]> Reviewed-by: Yanan Wang <[email protected]> Tested-by: Yanan Wang <[email protected]> Reviewed-by: Jim Mattson <[email protected]> Message-Id: <[email protected]> Cc: [email protected] Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21x86/kvm: Preserve BSP MSR_KVM_POLL_CONTROL across suspend/resumeWanpeng Li1-0/+13
MSR_KVM_POLL_CONTROL is cleared on reset, thus reverting guests to host-side polling after suspend/resume. Non-bootstrap CPUs are restored correctly by the haltpoll driver because they are hot-unplugged during suspend and hot-plugged during resume; however, the BSP is not hotpluggable and remains in host-sde polling mode after the guest resume. The makes the guest pay for the cost of vmexits every time the guest enters idle. Fix it by recording BSP's haltpoll state and resuming it during guest resume. Cc: Marcelo Tosatti <[email protected]> Signed-off-by: Wanpeng Li <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: SPDX style and spelling fixesTom Rix3-4/+4
SPDX comments use use /* */ style comments in headers anad // style comments in .c files. Also fix two spelling mistakes. Signed-off-by: Tom Rix <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: x86: Skip KVM_GUESTDBG_BLOCKIRQ APICv update if APICv is disabledSean Christopherson1-0/+3
Skip the APICv inhibit update for KVM_GUESTDBG_BLOCKIRQ if APICv is disabled at the module level to avoid having to acquire the mutex and potentially process all vCPUs. The DISABLE inhibit will (barring bugs) never be lifted, so piling on more inhibits is unnecessary. Fixes: cae72dcc3b21 ("KVM: x86: inhibit APICv when KVM_GUESTDBG_BLOCKIRQ active") Cc: Maxim Levitsky <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: x86: Pend KVM_REQ_APICV_UPDATE during vCPU creation to fix a raceSean Christopherson1-1/+14
Make a KVM_REQ_APICV_UPDATE request when creating a vCPU with an in-kernel local APIC and APICv enabled at the module level. Consuming kvm_apicv_activated() and stuffing vcpu->arch.apicv_active directly can race with __kvm_set_or_clear_apicv_inhibit(), as vCPU creation happens before the vCPU is fully onlined, i.e. it won't get the request made to "all" vCPUs. If APICv is globally inhibited between setting apicv_active and onlining the vCPU, the vCPU will end up running with APICv enabled and trigger KVM's sanity check. Mark APICv as active during vCPU creation if APICv is enabled at the module level, both to be optimistic about it's final state, e.g. to avoid additional VMWRITEs on VMX, and because there are likely bugs lurking since KVM checks apicv_active in multiple vCPU creation paths. While keeping the current behavior of consuming kvm_apicv_activated() is arguably safer from a regression perspective, force apicv_active so that vCPU creation runs with deterministic state and so that if there are bugs, they are found sooner than later, i.e. not when some crazy race condition is hit. WARNING: CPU: 0 PID: 484 at arch/x86/kvm/x86.c:9877 vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877 Modules linked in: CPU: 0 PID: 484 Comm: syz-executor361 Not tainted 5.16.13 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.10.2-1ubuntu1~cloud0 04/01/2014 RIP: 0010:vcpu_enter_guest+0x2ae3/0x3ee0 arch/x86/kvm/x86.c:9877 Call Trace: <TASK> vcpu_run arch/x86/kvm/x86.c:10039 [inline] kvm_arch_vcpu_ioctl_run+0x337/0x15e0 arch/x86/kvm/x86.c:10234 kvm_vcpu_ioctl+0x4d2/0xc80 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3727 vfs_ioctl fs/ioctl.c:51 [inline] __do_sys_ioctl fs/ioctl.c:874 [inline] __se_sys_ioctl fs/ioctl.c:860 [inline] __x64_sys_ioctl+0x16d/0x1d0 fs/ioctl.c:860 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x38/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae The bug was hit by a syzkaller spamming VM creation with 2 vCPUs and a call to KVM_SET_GUEST_DEBUG. r0 = openat$kvm(0xffffffffffffff9c, &(0x7f0000000000), 0x0, 0x0) r1 = ioctl$KVM_CREATE_VM(r0, 0xae01, 0x0) ioctl$KVM_CAP_SPLIT_IRQCHIP(r1, 0x4068aea3, &(0x7f0000000000)) (async) r2 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x0) (async) r3 = ioctl$KVM_CREATE_VCPU(r1, 0xae41, 0x400000000000002) ioctl$KVM_SET_GUEST_DEBUG(r3, 0x4048ae9b, &(0x7f00000000c0)={0x5dda9c14aa95f5c5}) ioctl$KVM_RUN(r2, 0xae80, 0x0) Reported-by: Gaoning Pan <[email protected]> Reported-by: Yongkang Jia <[email protected]> Fixes: 8df14af42f00 ("kvm: x86: Add support for dynamic APICv activation") Cc: [email protected] Cc: Maxim Levitsky <[email protected]> Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: nVMX: Defer APICv updates while L2 is active until L1 is activeSean Christopherson3-0/+11
Defer APICv updates that occur while L2 is active until nested VM-Exit, i.e. until L1 regains control. vmx_refresh_apicv_exec_ctrl() assumes L1 is active and (a) stomps all over vmcs02 and (b) neglects to ever updated vmcs01. E.g. if vmcs12 doesn't enable the TPR shadow for L2 (and thus no APICv controls), L1 performs nested VM-Enter APICv inhibited, and APICv becomes unhibited while L2 is active, KVM will set various APICv controls in vmcs02 and trigger a failed VM-Entry. The kicker is that, unless running with nested_early_check=1, KVM blames L1 and chaos ensues. In all cases, ignoring vmcs02 and always deferring the inhibition change to vmcs01 is correct (or at least acceptable). The ABSENT and DISABLE inhibitions cannot truly change while L2 is active (see below). IRQ_BLOCKING can change, but it is firmly a best effort debug feature. Furthermore, only L2's APIC is accelerated/virtualized to the full extent possible, e.g. even if L1 passes through its APIC to L2, normal MMIO/MSR interception will apply to the virtual APIC managed by KVM. The exception is the SELF_IPI register when x2APIC is enabled, but that's an acceptable hole. Lastly, Hyper-V's Auto EOI can technically be toggled if L1 exposes the MSRs to L2, but for that to work in any sane capacity, L1 would need to pass through IRQs to L2 as well, and IRQs must be intercepted to enable virtual interrupt delivery. I.e. exposing Auto EOI to L2 and enabling VID for L2 are, for all intents and purposes, mutually exclusive. Lack of dynamic toggling is also why this scenario is all but impossible to encounter in KVM's current form. But a future patch will pend an APICv update request _during_ vCPU creation to plug a race where a vCPU that's being created doesn't get included in the "all vCPUs request" because it's not yet visible to other vCPUs. If userspaces restores L2 after VM creation (hello, KVM selftests), the first KVM_RUN will occur while L2 is active and thus service the APICv update request made during VM creation. Cc: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: x86: Tag APICv DISABLE inhibit, not ABSENT, if APICv is disabledSean Christopherson1-1/+1
Set the DISABLE inhibit, not the ABSENT inhibit, if APICv is disabled via module param. A recent refactoring to add a wrapper for setting/clearing inhibits unintentionally changed the flag, probably due to a copy+paste goof. Fixes: 4f4c4a3ee53c ("KVM: x86: Trace all APICv inhibit changes and capture overall status") Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: Initialize debugfs_dentry when a VM is created to avoid NULL derefSean Christopherson1-6/+6
Initialize debugfs_entry to its semi-magical -ENOENT value when the VM is created. KVM's teardown when VM creation fails is kludgy and calls kvm_uevent_notify_change() and kvm_destroy_vm_debugfs() even if KVM never attempted kvm_create_vm_debugfs(). Because debugfs_entry is zero initialized, the IS_ERR() checks pass and KVM derefs a NULL pointer. BUG: kernel NULL pointer dereference, address: 0000000000000018 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 1068b1067 P4D 1068b1067 PUD 1068b0067 PMD 0 Oops: 0000 [#1] SMP CPU: 0 PID: 871 Comm: repro Not tainted 5.18.0-rc1+ #825 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 RIP: 0010:__dentry_path+0x7b/0x130 Call Trace: <TASK> dentry_path_raw+0x42/0x70 kvm_uevent_notify_change.part.0+0x10c/0x200 [kvm] kvm_put_kvm+0x63/0x2b0 [kvm] kvm_dev_ioctl+0x43a/0x920 [kvm] __x64_sys_ioctl+0x83/0xb0 do_syscall_64+0x31/0x50 entry_SYSCALL_64_after_hwframe+0x44/0xae </TASK> Modules linked in: kvm_intel kvm irqbypass Fixes: a44a4cc1c969 ("KVM: Don't create VM debugfs files outside of the VM directory") Cc: [email protected] Cc: Marc Zyngier <[email protected]> Cc: Oliver Upton <[email protected]> Reported-by: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Oliver Upton <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: Add helpers to wrap vcpu->srcu_idx and yell if it's abusedSean Christopherson11-50/+71
Add wrappers to acquire/release KVM's SRCU lock when stashing the index in vcpu->src_idx, along with rudimentary detection of illegal usage, e.g. re-acquiring SRCU and thus overwriting vcpu->src_idx. Because the SRCU index is (currently) either 0 or 1, illegal nesting bugs can go unnoticed for quite some time and only cause problems when the nested lock happens to get a different index. Wrap the WARNs in PROVE_RCU=y, and make them ONCE, otherwise KVM will likely yell so loudly that it will bring the kernel to its knees. Signed-off-by: Sean Christopherson <[email protected]> Tested-by: Fabiano Rosas <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: RISC-V: Use kvm_vcpu.srcu_idx, drop RISC-V's unnecessary copySean Christopherson3-13/+10
Use the generic kvm_vcpu's srcu_idx instead of using an indentical field in RISC-V's version of kvm_vcpu_arch. Generic KVM very intentionally does not touch vcpu->srcu_idx, i.e. there's zero chance of running afoul of common code. Signed-off-by: Sean Christopherson <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21KVM: x86: Don't re-acquire SRCU lock in complete_emulated_io()Sean Christopherson1-6/+1
Don't re-acquire SRCU in complete_emulated_io() now that KVM acquires the lock in kvm_arch_vcpu_ioctl_run(). More importantly, don't overwrite vcpu->srcu_idx. If the index acquired by complete_emulated_io() differs from the one acquired by kvm_arch_vcpu_ioctl_run(), KVM will effectively leak a lock and hang if/when synchronize_srcu() is invoked for the relevant grace period. Fixes: 8d25b7beca7e ("KVM: x86: pull kvm->srcu read-side to kvm_arch_vcpu_ioctl_run") Cc: [email protected] Signed-off-by: Sean Christopherson <[email protected]> Reviewed-by: Maxim Levitsky <[email protected]> Message-Id: <[email protected]> Signed-off-by: Paolo Bonzini <[email protected]>
2022-04-21Merge tag 'kvm-riscv-fixes-5.18-2' of https://github.com/kvm-riscv/linux ↵Paolo Bonzini1-9/+12
into HEAD KVM/riscv fixes for 5.18, take #2 - Remove 's' & 'u' as valid ISA extension - Do not allow disabling the base extensions 'i'/'m'/'a'/'c'
2022-04-20RISC-V: KVM: Restrict the extensions that can be disabledAtish Patra1-7/+12
Currently, the config isa register allows us to disable all allowed single letter ISA extensions. It shouldn't be the case as vmm shouldn't be able to disable base extensions (imac). These extensions should always be enabled as long as they are enabled in the host ISA. Signed-off-by: Atish Patra <[email protected]> Signed-off-by: Anup Patel <[email protected]> Fixes: 92ad82002c39 ("RISC-V: KVM: Implement KVM_GET_ONE_REG/KVM_SET_ONE_REG ioctls")
2022-04-20RISC-V: KVM: Remove 's' & 'u' as valid ISA extensionAtish Patra1-3/+1
There are no ISA extension defined as 's' & 'u' in RISC-V specifications. The misa register defines 's' & 'u' bit as Supervisor/User privilege mode enabled. But it should not appear in the ISA extension in the device tree. Remove those from the allowed ISA extension for kvm. Fixes: a33c72faf2d7 ("RISC-V: KVM: Implement VCPU create, init and destroy functions") Signed-off-by: Atish Patra <[email protected]> Signed-off-by: Anup Patel <[email protected]>
2022-04-17Linux 5.18-rc3Linus Torvalds1-1/+1
2022-04-17Merge tag 'for-linus-5.18-rc3-tag' of ↵Linus Torvalds2-64/+23
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixlet from Juergen Gross: "A single cleanup patch for the Xen balloon driver" * tag 'for-linus-5.18-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: xen/balloon: don't use PV mode extra memory for zone device allocations
Powered by cgit, Gruvboxed by Blaster4385.