aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-03-28mm/vmstat.c: fix vmstat_update() preemption BUGSteven J. Hill1-0/+2
Attempting to hotplug CPUs with CONFIG_VM_EVENT_COUNTERS enabled can cause vmstat_update() to report a BUG due to preemption not being disabled around smp_processor_id(). Discovered on Ubiquiti EdgeRouter Pro with Cavium Octeon II processor. BUG: using smp_processor_id() in preemptible [00000000] code: kworker/1:1/269 caller is vmstat_update+0x50/0xa0 CPU: 0 PID: 269 Comm: kworker/1:1 Not tainted 4.16.0-rc4-Cavium-Octeon-00009-gf83bbd5-dirty #1 Workqueue: mm_percpu_wq vmstat_update Call Trace: show_stack+0x94/0x128 dump_stack+0xa4/0xe0 check_preemption_disabled+0x118/0x120 vmstat_update+0x50/0xa0 process_one_work+0x144/0x348 worker_thread+0x150/0x4b8 kthread+0x110/0x140 ret_from_kernel_thread+0x14/0x1c Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Steven J. Hill <[email protected]> Reviewed-by: Andrew Morton <[email protected]> Cc: Tejun Heo <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-03-28mm/page_owner: fix recursion bug after changing skip entriesManinder Singh1-3/+3
This patch fixes commit 5f48f0bd4e36 ("mm, page_owner: skip unnecessary stack_trace entries"). Because if we skip first two entries then logic of checking count value as 2 for recursion is broken and code will go in one depth recursion. so we need to check only one call of _RET_IP(__set_page_owner) while checking for recursion. Current Backtrace while checking for recursion:- (save_stack) from (__set_page_owner) // (But recursion returns true here) (__set_page_owner) from (get_page_from_freelist) (get_page_from_freelist) from (__alloc_pages_nodemask) (__alloc_pages_nodemask) from (depot_save_stack) (depot_save_stack) from (save_stack) // recursion should return true here (save_stack) from (__set_page_owner) (__set_page_owner) from (get_page_from_freelist) (get_page_from_freelist) from (__alloc_pages_nodemask+) (__alloc_pages_nodemask) from (depot_save_stack) (depot_save_stack) from (save_stack) (save_stack) from (__set_page_owner) (__set_page_owner) from (get_page_from_freelist) Correct Backtrace with fix: (save_stack) from (__set_page_owner) // recursion returned true here (__set_page_owner) from (get_page_from_freelist) (get_page_from_freelist) from (__alloc_pages_nodemask+) (__alloc_pages_nodemask) from (depot_save_stack) (depot_save_stack) from (save_stack) (save_stack) from (__set_page_owner) (__set_page_owner) from (get_page_from_freelist) Link: http://lkml.kernel.org/r/[email protected] Fixes: 5f48f0bd4e36 ("mm, page_owner: skip unnecessary stack_trace entries") Signed-off-by: Maninder Singh <[email protected]> Signed-off-by: Vaneet Narang <[email protected]> Acked-by: Vlastimil Babka <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Oscar Salvador <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Ayush Mittal <[email protected]> Cc: Prakash Gupta <[email protected]> Cc: Vinayak Menon <[email protected]> Cc: Vasyl Gomonovych <[email protected]> Cc: Amit Sahrawat <[email protected]> Cc: <[email protected]> Cc: Vaneet Narang <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-03-28ipc/shm.c: add split function to shm_vm_opsMike Kravetz1-0/+12
If System V shmget/shmat operations are used to create a hugetlbfs backed mapping, it is possible to munmap part of the mapping and split the underlying vma such that it is not huge page aligned. This will untimately result in the following BUG: kernel BUG at /build/linux-jWa1Fv/linux-4.15.0/mm/hugetlb.c:3310! Oops: Exception in kernel mode, sig: 5 [#1] LE SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: kcm nfc af_alg caif_socket caif phonet fcrypt CPU: 18 PID: 43243 Comm: trinity-subchil Tainted: G C E 4.15.0-10-generic #11-Ubuntu NIP: c00000000036e764 LR: c00000000036ee48 CTR: 0000000000000009 REGS: c000003fbcdcf810 TRAP: 0700 Tainted: G C E (4.15.0-10-generic) MSR: 9000000000029033 <SF,HV,EE,ME,IR,DR,RI,LE> CR: 24002222 XER: 20040000 CFAR: c00000000036ee44 SOFTE: 1 NIP __unmap_hugepage_range+0xa4/0x760 LR __unmap_hugepage_range_final+0x28/0x50 Call Trace: 0x7115e4e00000 (unreliable) __unmap_hugepage_range_final+0x28/0x50 unmap_single_vma+0x11c/0x190 unmap_vmas+0x94/0x140 exit_mmap+0x9c/0x1d0 mmput+0xa8/0x1d0 do_exit+0x360/0xc80 do_group_exit+0x60/0x100 SyS_exit_group+0x24/0x30 system_call+0x58/0x6c ---[ end trace ee88f958a1c62605 ]--- This bug was introduced by commit 31383c6865a5 ("mm, hugetlbfs: introduce ->split() to vm_operations_struct"). A split function was added to vm_operations_struct to determine if a mapping can be split. This was mostly for device-dax and hugetlbfs mappings which have specific alignment constraints. Mappings initiated via shmget/shmat have their original vm_ops overwritten with shm_vm_ops. shm_vm_ops functions will call back to the original vm_ops if needed. Add such a split function to shm_vm_ops. Link: http://lkml.kernel.org/r/[email protected] Fixes: 31383c6865a5 ("mm, hugetlbfs: introduce ->split() to vm_operations_struct") Signed-off-by: Mike Kravetz <[email protected]> Reported-by: Laurent Dufour <[email protected]> Reviewed-by: Laurent Dufour <[email protected]> Tested-by: Laurent Dufour <[email protected]> Reviewed-by: Dan Williams <[email protected]> Acked-by: Michal Hocko <[email protected]> Cc: Davidlohr Bueso <[email protected]> Cc: Manfred Spraul <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-03-28mm, slab: memcg_link the SLAB's kmem_cacheShakeel Butt1-0/+1
All the root caches are linked into slab_root_caches which was introduced by the commit 510ded33e075 ("slab: implement slab_root_caches list") but it missed to add the SLAB's kmem_cache. While experimenting with opt-in/opt-out kmem accounting, I noticed system crashes due to NULL dereference inside cache_from_memcg_idx() while deferencing kmem_cache.memcg_params.memcg_caches. The upstream clean kernel will not see these crashes but SLAB should be consistent with SLUB which does linked its boot caches (kmem_cache_node and kmem_cache) into slab_root_caches. Link: http://lkml.kernel.org/r/[email protected] Fixes: 510ded33e075c ("slab: implement slab_root_caches list") Signed-off-by: Shakeel Butt <[email protected]> Cc: Tejun Heo <[email protected]> Cc: Vladimir Davydov <[email protected]> Cc: Greg Thelen <[email protected]> Cc: Christoph Lameter <[email protected]> Cc: Pekka Enberg <[email protected]> Cc: David Rientjes <[email protected]> Cc: Joonsoo Kim <[email protected]> Cc: Johannes Weiner <[email protected]> Cc: Michal Hocko <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-03-29Merge branch 'drm-misc-next-fixes' of ↵Dave Airlie1-1/+7
git://anongit.freedesktop.org/drm/drm-misc into drm-next - Mask mode type garbage from userspace (Ville) Something went wrong on the misc tree side, but I'll pull the patch directly. * 'drm-misc-next-fixes' of git://anongit.freedesktop.org/drm/drm-misc: drm: Fix uabi regression by allowing garbage mode->type from userspace
2018-03-28RDMA/ucma: Introduce safer rdma_addr_size() variantsRoland Dreier3-17/+35
There are several places in the ucma ABI where userspace can pass in a sockaddr but set the address family to AF_IB. When that happens, rdma_addr_size() will return a size bigger than sizeof struct sockaddr_in6, and the ucma kernel code might end up copying past the end of a buffer not sized for a struct sockaddr_ib. Fix this by introducing new variants int rdma_addr_size_in6(struct sockaddr_in6 *addr); int rdma_addr_size_kss(struct __kernel_sockaddr_storage *addr); that are type-safe for the types used in the ucma ABI and return 0 if the size computed is bigger than the size of the type passed in. We can use these new variants to check what size userspace has passed in before copying any addresses. Reported-by: <[email protected]> Signed-off-by: Roland Dreier <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-03-28locking/rtmutex: Handle non enqueued waiters gracefully in remove_waiter()Peter Zijlstra2-7/+7
In -RT task_blocks_on_rt_mutex() may return with -EAGAIN due to (->pi_blocked_on == PI_WAKEUP_INPROGRESS) before it added itself as a waiter. In such a case remove_waiter() must not be called because without a waiter it will trigger the BUG_ON() statement. This was initially reported by Yimin Deng. Thomas Gleixner fixed it then with an explicit check for waiters before calling remove_waiter(). Instead of an explicit NULL check before calling rt_mutex_top_waiter() make the function return NULL if there are no waiters. With that fixed the now pointless NULL check is removed from rt_mutex_slowlock(). Reported-and-debugged-by: Yimin Deng <[email protected]> Suggested-by: Thomas Gleixner <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Signed-off-by: Sebastian Andrzej Siewior <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Link: https://lkml.kernel.org/r/CAAh1qt=DCL9aUXNxanP5BKtiPp3m+qj4yB+gDohhXPVFCxWwzg@mail.gmail.com Link: https://lkml.kernel.org/r/[email protected]
2018-03-28Revert "x86/mce/AMD: Collect error info even if valid bits are not set"Yazen Ghannam1-14/+0
This reverts commit 4b1e84276a6172980c5bf39aa091ba13e90d6dad. Software uses the valid bits to decide if the values can be used for further processing or other actions. So setting the valid bits will have software act on values that it shouldn't be acting on. The recommendation to save all the register values does not mean that the values are always valid. Signed-off-by: Yazen Ghannam <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: Yazen Ghannam <[email protected]> Cc: [email protected] Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-03-28x86/platform/UV: Fix critical UV MMR address error[email protected]1-1/+1
A critical error was found testing the fixed UV4 HUB in that an MMR address was found to be incorrect. This causes the virtual address space for accessing the MMIOH1 region to be allocated with the incorrect size. Fixes: 673aa20c55a1 ("x86/platform/UV: Update uv_mmrs.h to prepare for UV4A fixes") Signed-off-by: Mike Travis <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Dimitri Sivanich <[email protected]> Cc: Russ Anderson <[email protected]> Cc: Andrew Banman <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-03-28perf/hwbp: Simplify the perf-hwbp code, fix documentationLinus Torvalds1-23/+7
Annoyingly, modify_user_hw_breakpoint() unnecessarily complicates the modification of a breakpoint - simplify it and remove the pointless local variables. Also update the stale Docbook while at it. Signed-off-by: Linus Torvalds <[email protected]> Acked-by: Thomas Gleixner <[email protected]> Cc: <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Frederic Weisbecker <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Vince Weaver <[email protected]> Signed-off-by: Ingo Molnar <[email protected]>
2018-03-28dma-mapping: Don't clear GFP_ZERO in dma_alloc_attrsChristoph Hellwig2-6/+5
Revert the clearing of __GFP_ZERO in dma_alloc_attrs and move it to dma_direct_alloc for now. While most common architectures always zero dma cohereny allocations (and x86 did so since day one) this is not documented and at least arc and s390 do not zero without the explicit __GFP_ZERO argument. Fixes: 57bf5a8963f8 ("dma-mapping: clear harmful GFP_* flags in common code") Reported-by: Evgeniy Didin <[email protected]> Reported-by: Sebastian Ott <[email protected]> Signed-off-by: Christoph Hellwig <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Tested-by: Evgeniy Didin <[email protected]> Cc: [email protected] Link: https://lkml.kernel.org/r/[email protected]
2018-03-28drm/tegra: dc: Using NULL instead of plain integerWei Yongjun1-1/+1
Fixes the following sparse warnings: drivers/gpu/drm/tegra/dc.c:2181:69: warning: Using plain integer as NULL pointer Signed-off-by: Wei Yongjun <[email protected]> Signed-off-by: Thierry Reding <[email protected]>
2018-03-28KVM: x86: Fix pv tlb flush dependenciesWanpeng Li1-2/+2
PV TLB FLUSH can only be turned on when steal time is enabled. The condition got reversed during conflict resolution. Cc: Paolo Bonzini <[email protected]> Cc: Radim Krčmář <[email protected]> Signed-off-by: Wanpeng Li <[email protected]> Fixes: 4f2f61fc5071 ("KVM: X86: Avoid traversing all the cpus for pv tlb flush when steal time is disabled") [Rebased on top of kvm/master and reworded the commit message. - Radim] Signed-off-by: Radim Krčmář <[email protected]>
2018-03-28x86/boot: Fix SEV boot failure from change to __PHYSICAL_MASK_SHIFTTom Lendacky3-18/+15
In arch/x86/boot/compressed/kaslr_64.c, CONFIG_AMD_MEM_ENCRYPT support was initially #undef'd to support SME with minimal effort. When support for SEV was added, the #undef remained and some minimal support for setting the encryption bit was added for building identity mapped pagetable entries. Commit b83ce5ee9147 ("x86/mm/64: Make __PHYSICAL_MASK_SHIFT always 52") changed __PHYSICAL_MASK_SHIFT from 46 to 52 in support of 5-level paging. This change resulted in SEV guests failing to boot because the encryption bit was no longer being automatically masked out. The compressed boot path now requires sme_me_mask to be defined in order for the pagetable functions, such as pud_present(), to properly mask out the encryption bit (currently bit 47) when evaluating pagetable entries. Add an sme_me_mask variable in arch/x86/boot/compressed/mem_encrypt.S, which is set when SEV is active, delete the #undef CONFIG_AMD_MEM_ENCRYPT from arch/x86/boot/compressed/kaslr_64.c and use sme_me_mask when building the identify mapped pagetable entries. Fixes: b83ce5ee9147 ("x86/mm/64: Make __PHYSICAL_MASK_SHIFT always 52") Signed-off-by: Tom Lendacky <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Brijesh Singh <[email protected]> Cc: "Kirill A. Shutemov" <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-03-28x86/platform/uv/BAU: Add APIC idt entryAndrew Banman3-2/+4
BAU uses the old alloc_initr_gate90 method to setup its interrupt. This fails silently as the BAU vector is in the range of APIC vectors that are registered to the spurious interrupt handler. As a consequence BAU broadcasts are not handled, and the broadcast source CPU hangs. Update BAU to use new idt structure. Fixes: dc20b2d52653 ("x86/idt: Move interrupt gate initialization to IDT code") Signed-off-by: Andrew Banman <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Acked-by: Mike Travis <[email protected]> Cc: Dimitri Sivanich <[email protected]> Cc: Russ Anderson <[email protected]> Cc: [email protected] Cc: "H. Peter Anvin" <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-03-28x86/msr: Make rdmsrl_safe_on_cpu() scheduling safe as wellEric Dumazet1-7/+4
When changing rdmsr_safe_on_cpu() to schedule, it was missed that __rdmsr_safe_on_cpu() was also used by rdmsrl_safe_on_cpu() Make rdmsrl_safe_on_cpu() a wrapper instead of copy/pasting the code which was added for the completion handling. Fixes: 07cde313b2d2 ("x86/msr: Allow rdmsr_safe_on_cpu() to schedule") Reported-by: kbuild test robot <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Link: https://lkml.kernel.org/r/[email protected]
2018-03-28Merge tag 'drm-amdkfd-next-2018-03-27' of ↵Dave Airlie19-165/+1398
git://people.freedesktop.org/~gabbayo/linux into drm-next - GPUVM support for dGPUs - KFD events support for dGPUs - Fix live-lock situation when restoring multiple evicted processes - Fix VM page table allocation on large-bar systems - Fix for build failure on frv architecture * tag 'drm-amdkfd-next-2018-03-27' of git://people.freedesktop.org/~gabbayo/linux: drm/amdkfd: Use ordered workqueue to restore processes drm/amdgpu: Fix acquiring VM on large-BAR systems drm/amdkfd: Add module option for testing large-BAR functionality drm/amdkfd: Kmap event page for dGPUs drm/amdkfd: Add ioctls for GPUVM memory management drm/amdkfd: Add TC flush on VMID deallocation for Hawaii drm/amdkfd: Allocate CWSR trap handler memory for dGPUs drm/amdkfd: Add per-process IDR for buffer handles drm/amdkfd: Aperture setup for dGPUs drm/amdkfd: Remove limit on number of GPUs drm/amdkfd: Populate DRM render device minor drm/amdkfd: Create KFD VMs on demand drm/amdgpu: Add kfd2kgd interface to acquire an existing VM drm/amdgpu: Add helper to turn an existing VM into a compute VM drm/amdgpu: Fix initial validation of PD BO for KFD VMs drm/amdgpu: Move KFD-specific fields into struct amdgpu_vm drm/amdkfd: fix uninitialized variable use drm/amdkfd: add missing include of mm.h
2018-03-28Merge tag 'drm-intel-next-fixes-2018-03-27' of ↵Dave Airlie3-26/+19
git://anongit.freedesktop.org/drm/drm-intel into drm-next - Display fixes for booting with MST hub lid closed and display freezing after hibernation (fd.o bugs 105470 & 105196) - Fix for a very rare interrupt handling race resulting in GPU hang * tag 'drm-intel-next-fixes-2018-03-27' of git://anongit.freedesktop.org/drm/drm-intel: drm/i915: Fix hibernation with ACPI S0 target state drm/i915/execlists: Use a locked clear_bit() for synchronisation with interrupt drm/i915: Specify which engines to reset following semaphore/event lockups drm/i915/dp: Write to SET_POWER dpcd to enable MST hub.
2018-03-28Backmerge tag 'v4.16-rc7' into drm-nextDave Airlie1554-10527/+17357
Linux 4.16-rc7 This was requested by Daniel, and things were getting a bit hard to reconcile, most of the conflicts were trivial though.
2018-03-27Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-armLinus Torvalds5-11/+12
Pull ARM fixes from Russell King: "A small number of small fixes for ARM, mostly for some build issues. One fix for a regression caused by the cpu hotplug conversion from a few kernel versions ago" * 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm: ARM: 8750/1: deflate_xip_data.sh: minor fixes ARM: 8748/1: mm: Define vdso_start, vdso_end as array ARM: 8747/1: make CONFIG_DEBUG_WX depend on MMU ARM: 8746/1: vfp: Go back to clearing vfp_current_hw_state[]
2018-03-27Merge tag 'scsi-fixes' of ↵Linus Torvalds11-147/+128
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: "Two driver fixes (ibmvfc, iscsi_tcp) and a USB fix for devices that give the wrong return to Read Capacity and cause a huge log spew. The remaining five patches all try to fix commit 84676c1f21e8 ("genirq/affinity: assign vectors to all possible CPUs") which broke the non-mq I/O path" * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: iscsi_tcp: set BDI_CAP_STABLE_WRITES when data digest enabled scsi: sd: Remember that READ CAPACITY(16) succeeded scsi: ibmvfc: Avoid unnecessary port relogin scsi: virtio_scsi: unify scsi_host_template scsi: virtio_scsi: fix IO hang caused by automatic irq vector affinity scsi: core: introduce force_blk_mq scsi: megaraid_sas: fix selection of reply queue scsi: hpsa: fix selection of reply queue
2018-03-27RDMA/hns: ensure for-loop actually iterates and free's buffersColin Ian King1-1/+1
The current for-loop zeros variable i and only loops once, hence not all the buffers are free'd. Fix this by setting i correctly. Detected by CoverityScan, CID#1463415 ("Operands don't affect result") Fixes: a5073d6054f7 ("RDMA/hns: Add eq support of hip08") Signed-off-by: Colin Ian King <[email protected]> Reviewed-by: Yixian Liu <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-03-27RDMA/ucma: Check that device exists prior to accessing itLeon Romanovsky1-2/+4
Ensure that device exists prior to accessing its properties. Reported-by: <[email protected]> Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace") Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-03-27RDMA/ucma: Check that device is connected prior to access itLeon Romanovsky1-0/+5
Add missing check that device is connected prior to access it. [ 55.358652] BUG: KASAN: null-ptr-deref in rdma_init_qp_attr+0x4a/0x2c0 [ 55.359389] Read of size 8 at addr 00000000000000b0 by task qp/618 [ 55.360255] [ 55.360432] CPU: 1 PID: 618 Comm: qp Not tainted 4.16.0-rc1-00071-gcaf61b1b8b88 #91 [ 55.361693] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 55.363264] Call Trace: [ 55.363833] dump_stack+0x5c/0x77 [ 55.364215] kasan_report+0x163/0x380 [ 55.364610] ? rdma_init_qp_attr+0x4a/0x2c0 [ 55.365238] rdma_init_qp_attr+0x4a/0x2c0 [ 55.366410] ucma_init_qp_attr+0x111/0x200 [ 55.366846] ? ucma_notify+0xf0/0xf0 [ 55.367405] ? _get_random_bytes+0xea/0x1b0 [ 55.367846] ? urandom_read+0x2f0/0x2f0 [ 55.368436] ? kmem_cache_alloc_trace+0xd2/0x1e0 [ 55.369104] ? refcount_inc_not_zero+0x9/0x60 [ 55.369583] ? refcount_inc+0x5/0x30 [ 55.370155] ? rdma_create_id+0x215/0x240 [ 55.370937] ? _copy_to_user+0x4f/0x60 [ 55.371620] ? mem_cgroup_commit_charge+0x1f5/0x290 [ 55.372127] ? _copy_from_user+0x5e/0x90 [ 55.372720] ucma_write+0x174/0x1f0 [ 55.373090] ? ucma_close_id+0x40/0x40 [ 55.373805] ? __lru_cache_add+0xa8/0xd0 [ 55.374403] __vfs_write+0xc4/0x350 [ 55.374774] ? kernel_read+0xa0/0xa0 [ 55.375173] ? fsnotify+0x899/0x8f0 [ 55.375544] ? fsnotify_unmount_inodes+0x170/0x170 [ 55.376689] ? __fsnotify_update_child_dentry_flags+0x30/0x30 [ 55.377522] ? handle_mm_fault+0x174/0x320 [ 55.378169] vfs_write+0xf7/0x280 [ 55.378864] SyS_write+0xa1/0x120 [ 55.379270] ? SyS_read+0x120/0x120 [ 55.379643] ? mm_fault_error+0x180/0x180 [ 55.380071] ? task_work_run+0x7d/0xd0 [ 55.380910] ? __task_pid_nr_ns+0x120/0x140 [ 55.381366] ? SyS_read+0x120/0x120 [ 55.381739] do_syscall_64+0xeb/0x250 [ 55.382143] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 55.382841] RIP: 0033:0x7fc2ef803e99 [ 55.383227] RSP: 002b:00007fffcc5f3be8 EFLAGS: 00000217 ORIG_RAX: 0000000000000001 [ 55.384173] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc2ef803e99 [ 55.386145] RDX: 0000000000000057 RSI: 0000000020000080 RDI: 0000000000000003 [ 55.388418] RBP: 00007fffcc5f3c00 R08: 0000000000000000 R09: 0000000000000000 [ 55.390542] R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000400480 [ 55.392916] R13: 00007fffcc5f3cf0 R14: 0000000000000000 R15: 0000000000000000 [ 55.521088] Code: e5 4d 1e ff 48 89 df 44 0f b6 b3 b8 01 00 00 e8 65 50 1e ff 4c 8b 2b 49 8d bd b0 00 00 00 e8 56 50 1e ff 41 0f b6 c6 48 c1 e0 04 <49> 03 85 b0 00 00 00 48 8d 78 08 48 89 04 24 e8 3a 4f 1e ff 48 [ 55.525980] RIP: rdma_init_qp_attr+0x52/0x2c0 RSP: ffff8801e2c2f9d8 [ 55.532648] CR2: 00000000000000b0 [ 55.534396] ---[ end trace 70cee64090251c0b ]--- Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace") Fixes: d541e45500bd ("IB/core: Convert ah_attr from OPA to IB when copying to user") Reported-by: <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-03-27RDMA/rdma_cm: Fix use after free race with process_one_reqJason Gunthorpe1-0/+9
process_one_req() can race with rdma_addr_cancel(): CPU0 CPU1 ==== ==== process_one_work() debug_work_deactivate(work); process_one_req() rdma_addr_cancel() mutex_lock(&lock); set_timeout(&req->work,..); __queue_work() debug_work_activate(work); mutex_unlock(&lock); mutex_lock(&lock); [..] list_del(&req->list); mutex_unlock(&lock); [..] // ODEBUG explodes since the work is still queued. kfree(req); Causing ODEBUG to detect the use after free: ODEBUG: free active (active state 0) object type: work_struct hint: process_one_req+0x0/0x6c0 include/net/dst.h:165 WARNING: CPU: 0 PID: 79 at lib/debugobjects.c:291 debug_print_object+0x166/0x220 lib/debugobjects.c:288 kvm: emulating exchange as write Kernel panic - not syncing: panic_on_warn set ... CPU: 0 PID: 79 Comm: kworker/u4:3 Not tainted 4.16.0-rc6+ #361 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Workqueue: ib_addr process_one_req Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 panic+0x1e4/0x41c kernel/panic.c:183 __warn+0x1dc/0x200 kernel/panic.c:547 report_bug+0x1f4/0x2b0 lib/bug.c:186 fixup_bug.part.11+0x37/0x80 arch/x86/kernel/traps.c:178 fixup_bug arch/x86/kernel/traps.c:247 [inline] do_error_trap+0x2d7/0x3e0 arch/x86/kernel/traps.c:296 do_invalid_op+0x1b/0x20 arch/x86/kernel/traps.c:315 invalid_op+0x1b/0x40 arch/x86/entry/entry_64.S:986 RIP: 0010:debug_print_object+0x166/0x220 lib/debugobjects.c:288 RSP: 0000:ffff8801d966f210 EFLAGS: 00010086 RAX: dffffc0000000008 RBX: 0000000000000003 RCX: ffffffff815acd6e RDX: 0000000000000000 RSI: 1ffff1003b2cddf2 RDI: 0000000000000000 RBP: ffff8801d966f250 R08: 0000000000000000 R09: 1ffff1003b2cddc8 R10: ffffed003b2cde71 R11: ffffffff86f39a98 R12: 0000000000000001 R13: ffffffff86f15540 R14: ffffffff86408700 R15: ffffffff8147c0a0 __debug_check_no_obj_freed lib/debugobjects.c:745 [inline] debug_check_no_obj_freed+0x662/0xf1f lib/debugobjects.c:774 kfree+0xc7/0x260 mm/slab.c:3799 process_one_req+0x2e7/0x6c0 drivers/infiniband/core/addr.c:592 process_one_work+0xc47/0x1bb0 kernel/workqueue.c:2113 worker_thread+0x223/0x1990 kernel/workqueue.c:2247 kthread+0x33c/0x400 kernel/kthread.c:238 ret_from_fork+0x3a/0x50 arch/x86/entry/entry_64.S:406 Fixes: 5fff41e1f89d ("IB/core: Fix race condition in resolving IP to MAC") Reported-by: <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-03-27qede: Fix barrier usage after tx doorbell write.Manish Chopra1-6/+4
Since commit c5ad119fb6c09b0297446be05bd66602fa564758 ("net: sched: pfifo_fast use skb_array") driver is exposed to an issue where it is hitting NULL skbs while handling TX completions. Driver uses mmiowb() to flush the writes to the doorbell bar which is a write-combined bar, however on x86 mmiowb() does not flush the write combined buffer. This patch fixes this problem by replacing mmiowb() with wmb() after the write combined doorbell write so that writes are flushed and synchronized from more than one processor. V1->V2: ------- This patch was marked as "superseded" in patchwork. (Not really sure for what reason).Resending it as v2. Signed-off-by: Ariel Elior <[email protected]> Signed-off-by: Manish Chopra <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-27vhost: correctly remove wait queue during poll failureJason Wang1-2/+1
We tried to remove vq poll from wait queue, but do not check whether or not it was in a list before. This will lead double free. Fixing this by switching to use vhost_poll_stop() which zeros poll->wqh after removing poll from waitqueue to make sure it won't be freed twice. Cc: Darren Kenny <[email protected]> Reported-by: [email protected] Fixes: 2b8b328b61c79 ("vhost_net: handle polling errors when setting backend") Signed-off-by: Jason Wang <[email protected]> Reviewed-by: Darren Kenny <[email protected]> Acked-by: Michael S. Tsirkin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-28kbuild: rpm-pkg: Support GNU tar >= 1.29Jason Gunthorpe1-1/+1
There is a change in how command line parsing is done in this version. Excludes and includes are now ordered with the file list. Since the spec file puts the file list before the exclude list it means newer tar ignores the excludes and packs all the build output into the kernel-devel RPM resulting in a huge package. Simple argument re-ordering fixes the problem. Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-03-28builddeb: Fix header package regarding dtc source linksJan Kiszka1-1/+1
Since d5d332d3f7e8, a couple of links in scripts/dtc/include-prefixes are additionally required in order to build device trees with the header package. Signed-off-by: Jan Kiszka <[email protected]> Reviewed-by: Riku Voipio <[email protected]> Signed-off-by: Masahiro Yamada <[email protected]>
2018-03-27perf vendor events s390: Add JSON files for IBM z14Thomas Richter4-0/+469
Add CPU measurement counter facility event description files (json files) for IBM z14. Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-27perf vendor events s390: Add JSON files for IBM z13Thomas Richter4-0/+511
Add CPU measurement counter facility event description files (json files) for IBM z13. Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-27perf vendor events s390: Add JSON files for IBM zEC12 zBC12Thomas Richter4-0/+385
Add CPU measurement counter facility event description files (json files) for IBM zEC12 and zBC12. Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-27perf vendor events s390: Add JSON files for IBM z196Thomas Richter4-0/+319
Add CPU measurement counter facility event description files (json files) for IBM z196. Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-27perf vendor events s390: Add JSON files for IBM z10EC z10BCThomas Richter4-0/+284
Add CPU measurement counter facility event description files (JSON files) for IBM z10EC and z10BC. Signed-off-by: Thomas Richter <[email protected]> Reviewed-by: Hendrik Brueckner <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: Martin Schwidefsky <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-27perf mmap: Be consistent when checking for an unmaped ring bufferArnaldo Carvalho de Melo1-1/+12
The previous patch is insufficient to cure the reported 'perf trace' segfault, as it only cures the perf_mmap__read_done() case, moving the segfault to perf_mmap__read_init() functio, fix it by doing the same refcount check. Cc: Adrian Hunter <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: David Ahern <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Fixes: 8872481bd048 ("perf mmap: Introduce perf_mmap__read_init()") Link: https://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-27perf mmap: Fix accessing unmapped mmap in perf_mmap__read_done()Kan Liang1-0/+6
There is a segmentation fault when running 'perf trace'. For example: [root@jouet e]# perf trace -e *chdir -o /tmp/bla perf report --ignore-vmlinux -i ../perf.data The perf_mmap__consume() could unmap the mmap. It needs to check the refcnt in perf_mmap__read_done(). Reported-by: Arnaldo Carvalho de Melo <[email protected]> Signed-off-by: Kan Liang <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Wang Nan <[email protected]> Fixes: ee023de05f35 ("perf mmap: Introduce perf_mmap__read_done()") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-27perf build: Fix check-headers.sh opts assignmentJiri Olsa1-0/+1
Currently the "opts" variable is not zero-ed and we keep on adding to it, ending up with: $ check-headers.sh 2>&1 + opts=' "-B"' + opts=' "-B" "-B"' + opts=' "-B" "-B" "-B"' + opts=' "-B" "-B" "-B" "-B"' + opts=' "-B" "-B" "-B" "-B" "-B"' + opts=' "-B" "-B" "-B" "-B" "-B" "-B"' Fix this by initializing it in the check() function, right before starting the loop. Signed-off-by: Jiri Olsa <[email protected]> Tested-by: Arnaldo Carvalho de Melo <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: David Ahern <[email protected]> Cc: Namhyung Kim <[email protected]> Cc: Peter Zijlstra <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
2018-03-27Merge branch 'mlx4-misc-fixes-for-4.16'David S. Miller4-47/+63
Tariq Toukan says: ==================== mlx4 misc fixes for 4.16 This patchset contains misc bug fixes from the team to the mlx4 Core and Eth drivers. Patch 1 by Eran fixes a control mix of PFC and Global pauses, please queue it to -stable for >= v4.8. Patch 2 by Moshe fixes a resource leak in slave's delete flow, please queue it to -stable for >= v4.5. Series generated against net commit: 3c82b372a9f4 net: dsa: mt7530: fix module autoloading for OF platform drivers ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-27net/mlx4_core: Fix memory leak while delete slave's resourcesMoshe Shemesh1-0/+1
mlx4_delete_all_resources_for_slave in resource tracker should free all memory allocated for a slave. While releasing memory of fs_rule, it misses releasing memory of fs_rule->mirr_mbox. Fixes: 78efed275117 ('net/mlx4_core: Support mirroring VF DMFS rules on both ports') Signed-off-by: Moshe Shemesh <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-27net/mlx4_en: Fix mixed PFC and Global pause user control requestsEran Ben Elisha3-47/+62
Global pause and PFC configuration should be mutually exclusive (i.e. only one of them at most can be set). However, once PFC was turned off, driver automatically turned Global pause on. This is a bug. Fix the driver behaviour to turn off PFC/Global once the user turned the other on. This also fixed a weird behaviour that at a current time, the profile had both PFC and global pause configuration turned on, which is Hardware-wise impossible and caused returning false positive indication to query tools. In addition, fix error code when setting global pause or PFC to change metadata only upon successful change. Also, removed useless debug print. Fixes: af7d51852631 ("net/mlx4_en: Add DCB PFC support through CEE netlink commands") Fixes: c27a02cd94d6 ("mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC") Signed-off-by: Eran Ben Elisha <[email protected]> Signed-off-by: Tariq Toukan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-27net/smc: use announced length in sock_recvmsg()Ursula Braun1-1/+1
Not every CLC proposal message needs the maximum buffer length. Due to the MSG_WAITALL flag, it is important to use the peeked real length when receiving the message. Fixes: d63d271ce2b5ce ("smc: switch to sock_recvmsg()") Signed-off-by: Ursula Braun <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-27llc: properly handle dev_queue_xmit() return valueCong Wang3-16/+33
llc_conn_send_pdu() pushes the skb into write queue and calls llc_conn_send_pdus() to flush them out. However, the status of dev_queue_xmit() is not returned to caller, in this case, llc_conn_state_process(). llc_conn_state_process() needs hold the skb no matter success or failure, because it still uses it after that, therefore we should hold skb before dev_queue_xmit() when that skb is the one being processed by llc_conn_state_process(). For other callers, they can just pass NULL and ignore the return value as they are. Reported-by: Noam Rathaus <[email protected]> Signed-off-by: Cong Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-27Merge tag 'mlx5-fixes-2018-03-23' of ↵David S. Miller5-33/+51
git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux Saeed Mahameed says: ==================== Mellanox, mlx5 fixes 2018-03-23 The following series includes fixes for mlx5 netdev and eswitch. v1->v2: - Fixed commit message quotation marks in patch #7 For -stable v4.12 ('net/mlx5e: Avoid using the ipv6 stub in the TC offload neigh update path') ('net/mlx5e: Fix traffic being dropped on VF representor') For -stable v4.13 ('net/mlx5e: Fix memory usage issues in offloading TC flows') ('net/mlx5e: Verify coalescing parameters in range') For -stable v4.14 ('net/mlx5e: Don't override vport admin link state in switchdev mode') For -stable v4.15 ('108b2b6d5c02 net/mlx5e: Sync netdev vxlan ports at open') Please pull and let me know if there's any problem. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-27strparser: Fix sign of err codesDave Watson1-2/+2
strp_parser_err is called with a negative code everywhere, which then calls abort_parser with a negative code. strp_msg_timeout calls abort_parser directly with a positive code. Negate ETIMEDOUT to match signed-ness of other calls. The default abort_parser callback, strp_abort_strp, sets sk->sk_err to err. Also negate the error here so sk_err always holds a positive value, as the rest of the net code expects. Currently a negative sk_err can result in endless loops, or user code that thinks it actually sent/received err bytes. Found while testing net/tls_sw recv path. Fixes: 43a0c6751a322847 ("strparser: Stream parser for messages") Signed-off-by: Dave Watson <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-27net sched actions: fix dumping which requires several messages to user spaceCraig Dillabaugh1-1/+3
Fixes a bug in the tcf_dump_walker function that can cause some actions to not be reported when dumping a large number of actions. This issue became more aggrevated when cookies feature was added. In particular this issue is manifest when large cookie values are assigned to the actions and when enough actions are created that the resulting table must be dumped in multiple batches. The number of actions returned in each batch is limited by the total number of actions and the memory buffer size. With small cookies the numeric limit is reached before the buffer size limit, which avoids the code path triggering this bug. When large cookies are used buffer fills before the numeric limit, and the erroneous code path is hit. For example after creating 32 csum actions with the cookie aaaabbbbccccdddd $ tc actions ls action csum total acts 26 action order 0: csum (tcp) action continue index 1 ref 1 bind 0 cookie aaaabbbbccccdddd ..... action order 25: csum (tcp) action continue index 26 ref 1 bind 0 cookie aaaabbbbccccdddd total acts 6 action order 0: csum (tcp) action continue index 28 ref 1 bind 0 cookie aaaabbbbccccdddd ...... action order 5: csum (tcp) action continue index 32 ref 1 bind 0 cookie aaaabbbbccccdddd Note that the action with index 27 is omitted from the report. Fixes: 4b3550ef530c ("[NET_SCHED]: Use nla_nest_start/nla_nest_end")" Signed-off-by: Craig Dillabaugh <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-27r8169: fix setting driver_data after register_netdevHeiner Kallweit1-2/+2
pci_set_drvdata() is called only after registering the net_device, therefore we could run into a NPE if one of the functions using driver_data is called before it's set. Fix this by calling pci_set_drvdata() before registering the net_device. This fix is a candidate for stable. As far as I can see the bug has been there in kernel version 3.2 already, therefore I can't provide a reference which commit is fixed by it. The fix may need small adjustments per kernel version because due to other changes the label which is jumped to if register_netdev() fails has changed over time. Reported-by: David Miller <[email protected]> Signed-off-by: Heiner Kallweit <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-27net: fix possible out-of-bound read in skb_network_protocol()Eric Dumazet1-1/+1
skb mac header is not necessarily set at the time skb_network_protocol() is called. Use skb->data instead. BUG: KASAN: slab-out-of-bounds in skb_network_protocol+0x46b/0x4b0 net/core/dev.c:2739 Read of size 2 at addr ffff8801b3097a0b by task syz-executor5/14242 CPU: 1 PID: 14242 Comm: syz-executor5 Not tainted 4.16.0-rc6+ #280 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:17 [inline] dump_stack+0x194/0x24d lib/dump_stack.c:53 print_address_description+0x73/0x250 mm/kasan/report.c:256 kasan_report_error mm/kasan/report.c:354 [inline] kasan_report+0x23c/0x360 mm/kasan/report.c:412 __asan_report_load_n_noabort+0xf/0x20 mm/kasan/report.c:443 skb_network_protocol+0x46b/0x4b0 net/core/dev.c:2739 harmonize_features net/core/dev.c:2924 [inline] netif_skb_features+0x509/0x9b0 net/core/dev.c:3011 validate_xmit_skb+0x81/0xb00 net/core/dev.c:3084 validate_xmit_skb_list+0xbf/0x120 net/core/dev.c:3142 packet_direct_xmit+0x117/0x790 net/packet/af_packet.c:256 packet_snd net/packet/af_packet.c:2944 [inline] packet_sendmsg+0x3aed/0x60b0 net/packet/af_packet.c:2969 sock_sendmsg_nosec net/socket.c:629 [inline] sock_sendmsg+0xca/0x110 net/socket.c:639 ___sys_sendmsg+0x767/0x8b0 net/socket.c:2047 __sys_sendmsg+0xe5/0x210 net/socket.c:2081 Fixes: 19acc327258a ("gso: Handle Trans-Ether-Bridging protocol in skb_network_protocol()") Signed-off-by: Eric Dumazet <[email protected]> Cc: Pravin B Shelar <[email protected]> Reported-by: Reported-by: syzbot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-27net-usb: add qmi_wwan if on lte modem wistron neweb d18q1Giuseppe Lippolis1-0/+3
This modem is embedded on dlink dwr-921 router. The oem configuration states: T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1435 ProdID=0918 Rev= 2.32 S: Manufacturer=Android S: Product=Android S: SerialNumber=0123456789ABCDEF C:* #Ifs= 7 Cfg#= 1 Atr=80 MxPwr=500mA I:* If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=84(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=83(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=86(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=85(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=88(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=87(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan E: Ad=8a(I) Atr=03(Int.) MxPS= 64 Ivl=32ms E: Ad=89(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=06(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=(none) E: Ad=8b(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=07(O) Atr=02(Bulk) MxPS= 512 Ivl=125us Tested on openwrt distribution Signed-off-by: Giuseppe Lippolis <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-27Merge tag 'batadv-net-for-davem-20180326' of git://git.open-mesh.org/linux-mergeDavid S. Miller2-3/+6
Simon Wunderlich says: ==================== Here are some batman-adv bugfixes: - fix multicast-via-unicast transmissions for AP isolation and gateway extension, by Linus Luessing (2 patches) ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-27ALSA: pcm: potential uninitialized return valuesDan Carpenter1-2/+2
Smatch complains that "tmp" can be uninitialized if we do a zero size write. Fixes: 02a5d6925cd3 ("ALSA: pcm: Avoid potential races between OSS ioctls and read/write") Signed-off-by: Dan Carpenter <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.