aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2013-01-08Merge tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson6-20/+2
into fixes From Shawn Guo: It includes one critical fix - wrong flexcan2 clock will hang system when the port gets brought up. The other two are non-critical fixes, which are sent together here, since it's still early -rc stage. * tag 'imx-fixes-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mx5: Fix MX53 flexcan2 clock ARM: dts: imx31-bug: Fix manufacturer compatible string clk: imx: Remove 'clock-output-names' from the examples
2013-01-08Merge tag 'sound-3.8' of ↵Linus Torvalds8-17/+67
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: "Nothing too exciting here, just a few regression and trivial fixes, and new quirks for HD-audio and USB-audio. - HD-audio mute LED mode enum fix - Fix kernel panic of Digidesign Mbox2 usb-audio quirk (which was new in 3.8-rc1) - Creative BT-D1 usb-audio quirk - mute LED fixup for HP Pavillion 17 laptop" * tag 'sound-3.8' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: hda - add mute LED for HP Pavilion 17 (Realtek codec) ALSA: au88x0: fix incorrect left shift sound: oss/pas2: Fix possible access out of array ALSA: usb-audio: Fix kernel panic of Digidesign Mbox2 quirk ALSA: usb-audio: Add support for Creative BT-D1 via usb sound quirks ALSA: hda - Switch "On" and "Off" for "Mute-LED Mode" kcontrol
2013-01-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds44-115/+353
Pull networking fixes from David Miller: 1) New sysctl ndisc_notify needs some documentation, from Hanns Frederic Sowa. 2) Netfilter REJECT target doesn't set transport header of SKB correctly, from Mukund Jampala. 3) Forcedeth driver needs to check for DMA mapping failures, from Larry Finger. 4) brcmsmac driver can't use usleep_range while holding locks, use udelay instead. From Niels Ole Salscheider. 5) Fix unregister of netlink bridge multicast database handlers, from Vlad Yasevich and Rami Rosen. 6) Fix checksum calculations in netfilter's ipv6 network prefix translation module. 7) Fix high order page allocation failures in netfilter xt_recent, from Eric Dumazet. 8) mac802154 needs to use netif_rx_ni() instead of netif_rx() because mac802154_process_data() can execute in process rather than interrupt context. From Alexander Aring. 9) Fix splice handling of MSG_SENDPAGE_NOTLAST, otherwise we elide one tcp_push() too many. From Eric Dumazet and Willy Tarreau. 10) Fix skb->truesize tracking in XEN netfront driver, from Ian Campbell. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (46 commits) xen/netfront: improve truesize tracking ipv4: fix NULL checking in devinet_ioctl() tcp: fix MSG_SENDPAGE_NOTLAST logic net/ipv4/ipconfig: really display the BOOTP/DHCP server's address. ip-sysctl: fix spelling errors mac802154: fix NOHZ local_softirq_pending 08 warning ipv6: document ndisc_notify in networking/ip-sysctl.txt ath9k: Fix Kconfig for ATH9K_HTC netfilter: xt_recent: avoid high order page allocations netfilter: fix missing dependencies for the NOTRACK target netfilter: ip6t_NPT: fix IPv6 NTP checksum calculation bridge: add empty br_mdb_init() and br_mdb_uninit() definitions. vxlan: allow live mac address change bridge: Correctly unregister MDB rtnetlink handlers brcmfmac: fix parsing rsn ie for ap mode. brcmsmac: add copyright information for Canonical rtlwifi: rtl8723ae: Fix warning for unchecked pci_map_single() call rtlwifi: rtl8192se: Fix warning for unchecked pci_map_single() call rtlwifi: rtl8192de: Fix warning for unchecked pci_map_single() call rtlwifi: rtl8192ce: Fix warning for unchecked pci_map_single() call ...
2013-01-08KVM: x86: use dynamic percpu allocations for shared msrs areaMarcelo Tosatti1-6/+18
Use dynamic percpu allocations for the shared msrs structure, to avoid using the limited reserved percpu space. Reviewed-by: Gleb Natapov <[email protected]> Signed-off-by: Marcelo Tosatti <[email protected]>
2013-01-08drm/i915: The sprite scaler on Ironlake also support YUV planesChris Wilson1-1/+1
This fixes a regression from commit 57779d06367a915ee03e6cb918d7575f0a46e419 Author: Ville Syrjälä <[email protected]> Date: Wed Oct 31 17:50:14 2012 +0200 drm/i915: Fix display pixel format handling (which even says that they are supported on Ironlake, and then promptly rejects then...) Signed-off-by: Chris Wilson <[email protected]> Signed-off-by: Daniel Vetter <[email protected]>
2013-01-08drm: Only evict the blocks required to create the requested holeChris Wilson2-29/+18
Avoid clobbering adjacent blocks if they happen to expire earlier and amalgamate together to form the requested hole. In passing this fixes a regression from commit ea7b1dd44867e9cd6bac67e7c9fc3f128b5b255c Author: Daniel Vetter <[email protected]> Date: Fri Feb 18 17:59:12 2011 +0100 drm: mm: track free areas implicitly which swaps the end address for size (with a potential overflow) and effectively causes the eviction code to clobber almost all earlier buffers above the evictee. v2: Check the original hole not the adjusted as the coloring may confuse us when later searching for the overlapping nodes. Also make sure that we do apply the range restriction and color adjustment in the same order for both scanning, searching and insertion. v3: Send the version that was actually tested. Note that this seems to be ducttape of decent quality ot paper over some of our unbind related gpu hangs reported since 3.7. It is not fully effective though, and certainly doesn't fix the underlying bug. Signed-off-by: Chris Wilson <[email protected]> Cc: Daniel Vetter <[email protected]> [danvet: Added note plus bugzilla link and tested-by.] Cc: [email protected] Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=55984 Tested-by: Norbert Preining <[email protected]> Acked-by: Dave Airlie <[email protected] Signed-off-by: Daniel Vetter <[email protected]>
2013-01-08s390/pci: define read*_relaxed functionsHeiko Carstens1-0/+5
Just map the read*_relaxed() functions to their corresponding read*() functions. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2013-01-08s390/topology: export cpu_topologyHeiko Carstens1-0/+2
Export cpu_topology symbol, so it's available for modules. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2013-01-08s390/pm: export pm_power_offHeiko Carstens1-1/+2
Export pm_power_off symbol. Needed by at least one of the new device drivers that come with CONFIG_PCI. And all other architectures export that symbol as well. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2013-01-08s390/pci: define isa_dma_bridge_buggyHeiko Carstens1-0/+6
Define isa_dma_bridge_buggy. Needed to make pci quirks compile: drivers/pci/quirks.c: In function ‘quirk_isa_dma_hangs’: drivers/pci/quirks.c:88:7: error: ‘isa_dma_bridge_buggy’ undeclared (first use in this function) Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2013-01-08s390/3215: partially revert tty close handling fixHeiko Carstens1-1/+5
Partially revert ae289dc1f "s390/3215: fix tty close handling", since this leads sometimes to hanging agetty processes and therefore systems that get stuck while starting. This was magically fixed (bisected) by a common code patch from Alan Cox: 36b3c070 "tty: Move the handling of the tty release logic", however it was unrelated. Since the removed code worked for a decade, nobody knows anymore why it was in there in the first place and debugging the observed hang is non-trivial (at least for me :) ), let's just re-add the removed code before we see other side effects. Signed-off-by: Heiko Carstens <[email protected]>
2013-01-08s390/irq: count cpu restart eventsHeiko Carstens3-0/+3
Count CPU Restart events and make them visible via /proc/interrupts. Every CPU hotplug (online) event will increase the per cpu counter. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2013-01-08s390/irq: remove split irq fields from /proc/statHeiko Carstens31-121/+162
Now that irq sum accounting for /proc/stat's "intr" line works again we have the oddity that the sum field (first field) contains only the sum of the second (external irqs) and third field (I/O interrupts). The reason for that is that these two fields are already sums of all other fields. So if we would sum up everything we would count every interrupt twice. This is broken since the split interrupt accounting was merged two years ago: 052ff461c8427629aee887ccc27478fc7373237c "[S390] irq: have detailed statistics for interrupt types". To fix this remove the split interrupt fields from /proc/stat's "intr" line again and only have them in /proc/interrupts. This restores the old behaviour, seems to be the only sane fix and mimics a behaviour from other architectures where /proc/interrupts also contains more than /proc/stat's "intr" line does. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2013-01-08s390/irq: enable irq sum accounting for /proc/stat againHeiko Carstens2-2/+2
For more than two years, since f2c66cd8eeddedb440f33bc0f5cec1ed7ae376cb "/proc/stat: scalability of irq num per cpu" the output of /proc/stat is broken. The first field in the "intr" line should contain the sum of all interrupts, however since the above mentioned change it is always zero. The reason for that is that a per cpu irq sum variable had been introduced which got incremented when calling kstat_incr_irqs_this_cpu(). However on s390 we directly incremented only the per cpu per irq counter by accessing the array element via kstat_cpu(smp_processor_id()).irqs[...]. So fix this and use the kstat_incr_irqs_this_cpu() wrapper which increments both: the per cpu per irq counter and the per cpu irq sum counter. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2013-01-08s390/syscalls: wire up finit_module syscallHeiko Carstens3-1/+9
Signed-off-by: Heiko Carstens <[email protected]>
2013-01-08s390/pci: remove dead codeHeiko Carstens2-31/+0
Get rid of these: arch/s390/pci/pci_dma.c:16:29: warning: ‘zpci_ioat_dt’ defined but not used [-Wunused-variable] arch/s390/pci/pci.c:164:12: warning: ‘zpci_store_fib’ defined but not used [-Wunused-function] Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2013-01-08s390/smp: fix section mismatch for smp_add_present_cpu()Heiko Carstens1-3/+4
Fixes this section mismatch: WARNING: vmlinux.o(.text+0x145e4): Section mismatch in reference from the function smp_add_present_cpu() to the function .cpuinit.text:register_cpu() The function smp_add_present_cpu() references the function __cpuinit register_cpu(). This is often because smp_add_present_cpu lacks a __cpuinit annotation or the annotation of register_cpu is wrong. Signed-off-by: Heiko Carstens <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2013-01-08s390/debug: Fix s390dbf lockdep problem in debug_(un)register_view()Michael Holzheu1-4/+7
The debug_register/unregister_view() functions call debugfs_remove() while holding the debug_info spinlock. Because debugfs_remove() takes a mutex and therefore can sleep this is not allowed. To fix the problem we give up the debug_info lock before calling debugfs_remove(). The following shows the lockdep message: [ INFO: possible circular locking dependency detected ] ------------------------------------------------------- rmmod/4379 is trying to acquire lock: (&sb->s_type->i_mutex_key#2){+.+.+.}, at: [<00000000003acae2>] debugfs_remove+0x5e/0xa but task is already holding lock: (&(&rc->lock)->rlock){-.-...}, at: [<000000000010a5ae>] debug_unregister_view+0x3a/0xd which lock already depends on the new lock. -> #0 (&sb->s_type->i_mutex_key#2){+.+.+.}: [<00000000001b1644>] validate_chain+0x880/0x1154 [<00000000001b4d6c>] __lock_acquire+0x414/0xc44 [<00000000001b5c16>] lock_acquire+0xbe/0x178 [<0000000000614016>] mutex_lock_nested+0x66/0x36c [<00000000003acae2>] debugfs_remove+0x5e/0xac [<000000000010a620>] debug_unregister_view+0xac/0xd0 [<000003ff8002f140>] qeth_core_exit+0x48/0xf08 [qeth] [<00000000001c35a4>] SyS_delete_module+0x1a4/0x260 [<0000000000618134>] sysc_noemu+0x22/0x28 [<000003fffd4704da>] 0x3fffd4704da Signed-off-by: Michael Holzheu <[email protected]> Signed-off-by: Martin Schwidefsky <[email protected]>
2013-01-08drm/ttm: fix fence locking in ttm_buffer_object_transferDaniel Vetter1-1/+3
Noticed while reviewing the fence locking in the radeon pageflip handler. v2: Instead of grabbing the bdev->fence_lock in object_transfer just move the single callsite of that function a few lines, so that it is protected by the fence_lock. Suggested by Jerome Glisse. v3: Fix typo in commit message. Reviewed-by: Jerome Glisse <[email protected]> Signed-off-by: Daniel Vetter <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2013-01-07Merge tag 'mvebu_fixes_for_v3.8' of ↵Olof Johansson17-47/+101
git://git.infradead.org/users/jcooper/linux into fixes From Jason Cooper: fixes for mvebu/kirkwood v3.8 - use correct uart driver for mvebu boards - add a missing DT clocks - gpio-poweroff level vs. edge triggering, use gpio_is_valid() - remove an inappropriate __init, modules need to access function. - various DT fixes - error handling in mv_xor * tag 'mvebu_fixes_for_v3.8' of git://git.infradead.org/users/jcooper/linux: pinctrl: mvebu: make pdma clock on dove mandatory ARM: Dove: Add pinctrl clock to DT dma: mv_xor: fix error handling for clocks dma: mv_xor: fix error handling of mv_xor_channel_add() arm: mvebu: Add missing ; for cpu node. arm: mvebu: Armada XP MV78230 has only three Ethernet interfaces arm: mvebu: Armada XP MV78230 has two cores, not one clk: mvebu: Remove inappropriate __init tagging ARM: Kirkwood: Use fixed-regulator instead of board gpio call ARM: Kirkwood: Fix missing sdio clock ARM: Kirkwood: Switch TWSI1 of 88f6282 to DT clock providers Power: gpio-poweroff: Fix documentation and gpio_is_valid ARM: Kirkwood: Fix missing clk for USB device. arm: mvebu: Use dw-apb-uart instead of ns16650 as UART driver Signed-off-by: Olof Johansson <[email protected]>
2013-01-07ARM: clps711x: Fix bad merge of clockevents setupOlof Johansson1-1/+0
I mismerged a previous branch from Alexander, and accidentally left in ARCH_USES_GETTIMEOFFSET. Remove it. Signed-off-by: Olof Johansson <[email protected]> Cc: Alexander Shiyan <[email protected]>
2013-01-07Merge tag 'nomadik-fixes-for-arm-soc' of ↵Olof Johansson2-40/+39
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik into fixes From Linus Walleij: Two fixes to the Nomadik: - Delete a dangling include - Bump IRQ numbers to offset at 32 * tag 'nomadik-fixes-for-arm-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik: ARM: nomadik: bump the IRQ numbers again ARM: nomadik: delete dangling include
2013-01-07ARM: highbank: save and restore L2 cache and GIC on suspendRob Herring1-1/+18
This fixes suspend to RAM adding necessary save and restore of L2 and GIC. Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2013-01-07ARM: highbank: add a power request clearRob Herring1-0/+15
When we fail to power down, we need to clear out the power request. Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2013-01-07ARM: highbank: fix secondary boot and hotplugRob Herring2-12/+2
With commit 384a290 (ARM: gic: use a private mapping for CPU target interfaces), wake-up IPIs now go to all cores as the gic cpu interface numbering may not follow core numbering. This broke secondary boot on highbank since the boot address was already set for all secondary cores, this caused all cores to boot before the kernel was ready. Fix this by moving the setting of the jump address to highbank_boot_secondary instead of highbank_smp_prepare_cpus and highbank_cpu_die. Also, clear the address when we boot. This prevents cores from booting before they are actually triggered and is also necessary to get suspend/resume to work. Signed-off-by: Rob Herring <[email protected]> Cc: Nicolas Pitre <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2013-01-07ARM: highbank: fix typos with hignbank in power request functionsRob Herring4-8/+8
s/hignbank/highbank/ Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2013-01-07ARM: dts: fix highbank cpu mpidr valuesRob Herring1-8/+8
With the addition of commit a0ae0240 (ARM: kernel: add device tree init map function), the cpu reg values must match the cpu mpidr register or we'll get warnings. For some reason, the CLUSTERID on highbank is 9, so the reg value needs to be 0x90n to quiet the warnings. Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2013-01-07ARM: dts: add device_type prop to cpu nodes on Calxeda platformsRob Herring2-0/+8
While device_type is considered deprecated, it is still needed for tools like lshw to identify cpu nodes. Signed-off-by: Rob Herring <[email protected]> Signed-off-by: Olof Johansson <[email protected]>
2013-01-08Merge branch 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie6-16/+135
into drm-next Alex writes: A few more fixes for DMA and a mac quirk. * 'drm-fixes-3.8' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: add quirk for d3 delay during switcheroo poweron for apple macbooks drm/radeon: fix DMA CS parser for r6xx linear copy packet drm/radeon: split r6xx and r7xx copy_dma functions
2013-01-08drm/prime: drop reference on imported dma-buf come from gemSeung-Woo Kim5-0/+17
Increasing ref counts of both dma-buf and gem for imported dma-buf come from gem makes memory leak. release function of dma-buf cannot be called because f_count of dma-buf increased by importing gem and gem ref count cannot be decrease because of exported dma-buf. So I add dma_buf_put() for imported gem come from its own gem into each drivers having prime_import and prime_export capabilities. With this, only gem ref count is increased if importing gem exported from gem of same driver. Signed-off-by: Seung-Woo Kim <[email protected]> Signed-off-by: Kyungmin.park <[email protected]> Cc: Inki Dae <[email protected]> Cc: Daniel Vetter <[email protected]> Cc: Rob Clark <[email protected]> Cc: Alex Deucher <[email protected]> Cc: stable <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2013-01-07xen/netfront: improve truesize trackingIan Campbell1-23/+4
Using RX_COPY_THRESHOLD is incorrect if the SKB is actually smaller than that. We have already accounted for this in NETFRONT_SKB_CB(skb)->pull_to so use that instead. Fixes WARN_ON from skb_try_coalesce. Signed-off-by: Ian Campbell <[email protected]> Cc: Sander Eikelenboom <[email protected]> Cc: Konrad Rzeszutek Wilk <[email protected]> Cc: annie li <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] # 3.7.x only Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2013-01-08Merge branch 'exynos-drm-fixes' of ↵Dave Airlie37-811/+292
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-next Summary: - change exynos file license . Most of exynos files had been copied from some randome file and not updated correctly(wrong company name used). This was our mistakes so chagnes it correctly. For this, I'm not sure that this patch should go to -fix or -next. So please give me any comment if there is any problem. - consider buffer allocation without iommu . Without iommu, dma_alloc_attrs function allocates some memory region and returns cpu address so this patch makes the cpu address to be set to buf->kvaddr correctly - cleanups to ipp relevant codes. - use common finish page flip function . to avoid the duplication of same code, use exynos_drm_crtc_finish_pageflip function commonly instead of each one. - fix fimd resume issue. . when fimd was turned off by suspend, there was one issue that the fimd wasn't turned on by resume so fix it chaing resume condition. * 'exynos-drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: (25 commits) drm/exynos: move finish page flip to a common place drm/exynos: fimd: modify condition in fimd resume drm/exynos: Use devm_clk_get in exynos_drm_gsc.c drm/exynos: Remove redundant NULL check in exynos_drm_gsc.c drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_gsc.c drm/exynos: Use devm_clk_get in exynos_drm_rotator.c drm/exynos: Remove redundant NULL check in exynos_drm_rotator.c drm/exynos: Remove unnecessary devm_* freeing APIs in exynos_drm_rotator.c drm/exynos: Use devm_clk_get in exynos_drm_fimc.c drm/exynos: Remove redundant NULL check drm/exynos: Remove explicit freeing using devm_* APIs in exynos_drm_fimc.c drm/exynos: Use devm_kzalloc in exynos_drm_ipp.c drm/exynos: fix gem buffer allocation type checking drm/exynos: remove needless parenthesis. drm/exynos: fix incorrect interrupt induced by m2m operation. drm/exynos: remove color bar pattern operation. drm/exynos: correct some comments to abbreviation. drm/exynos: fix build warning. drm/exynos: consider both case of vflip and hflip. drm/exynos: remove needless error handling to property. ...
2013-01-07Merge branch 'master' of git://1984.lsi.us.es/nfDavid S. Miller3-31/+28
Pablo Neira Ayuso says: ==================== The following batch contains Netfilter fixes for 3.8-rc2, they are: * Fix IPv6 stateless network/port translation (NPT) checksum calculation, from Ulrich Weber. * Fix for xt_recent to avoid memory allocation failures if large hashtables are used, from Eric Dumazet. * Fix missing dependencies in Kconfig for the deprecated NOTRACK, from myself. ==================== Signed-off-by: David S. Miller <[email protected]>
2013-01-08ARM: mx5: Fix MX53 flexcan2 clockMarek Vasut1-1/+1
The second FlexCAN port uses different clock than the first one, configure correct clock to prevent hanging of the system during bringing up of the port. Signed-off-by: Marek Vasut <[email protected]> Cc: Fabio Estevam <[email protected]> Acked-by: Sascha Hauer <[email protected]> Signed-off-by: Shawn Guo <[email protected]>
2013-01-07Merge tag 'pm+acpi-for-3.8-rc3' of ↵Linus Torvalds22-856/+154
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI and power management fixes from Rafael Wysocki: - Removal of some ACPICA code that the kernel will never use from Lv Zheng. - APEI fix from Adrian Huang. - Removal of unnecessary ACPI memory hotplug driver code from Liu Jinsong. - Minor ACPI power management fixes. - ACPI debug code fix from Joe Perches. - ACPI fix to make system bus device nodes get the right names. - PNP resources handling fixes from Witold Szczeponik. - cpuidle fix for a recent regression stalling boot on systems with great numbers of CPUs from Daniel Lezcano. - cpuidle fixes from Sivaram Nair. - intel_idle debug message fix from Youquan Song. - cpufreq build regression fix from Larry Finger. - cpufreq fix for an obscure initialization race related to statistics from Konstantin Khlebnikov. - cpufreq change disabling the Longhaul driver by default from Rafał Bilski. - PM core fix preventing device suspend errors from happening during system suspend due to obscure race conditions. - PM QoS local variable name cleanup. * tag 'pm+acpi-for-3.8-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: Move disabling/enabling runtime PM to late suspend/early resume PM / QoS: Rename local variable in dev_pm_qos_add_ancestor_request() ACPI / scan: Do not use dummy HID for system bus ACPI nodes cpufreq / governor: Fix problem with cpufreq_ondemand or cpufreq_conservative cpufreq / Longhaul: Disable driver by default cpufreq / stats: fix race between stats allocation and first usage cpuidle: fix lock contention in the idle path intel_idle: pr_debug information need separated cpuidle / coupled: fix ready counter decrement cpuidle: Fix finding state with min power_usage PNP: Handle IORESOURCE_BITS in resource allocation PNP: Simplify setting of resources ACPI / power: Remove useless message from device registering routine ACPI / glue: Update DBG macro to include KERN_DEBUG ACPI / PM: Do not apply ACPI_SUCCESS() to acpi_bus_get_device() result ACPI / memhotplug: remove redundant logic of acpi memory hotadd ACPI / APEI: Fix the returned value in erst_dbg_read ACPICA: Remove useless mini-C library.
2013-01-07Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds6-70/+90
Pull CIFS fixes from Steve French: "Misc small cifs fixes" * 'for-next' of git://git.samba.org/sfrench/cifs-2.6: CIFS: Don't let read only caching for mandatory byte-range locked files CIFS: Fix write after setting a read lock for read oplock files Revert "CIFS: Fix write after setting a read lock for read oplock files" cifs: adjust sequence number downward after signing NT_CANCEL request cifs: move check for NULL socket into smb_send_rqst
2013-01-07ARM: OMAP2+: am33xx-hwmod: Fix wrongly terminated am33xx_usbss_mpu_irqs arrayPantelis Antoniou1-1/+1
The IRQ array must be terminated by -1 and not by -1+OMAP_INTC_START This led to having a resource list of 100s of IRQs. Looks like this was caused by commit a2cfc509 (ARM: OMAP3+: hwmod: Add AM33XX HWMOD data) that probably had some search and replace updates done for the patch for sparse irq support. Signed-off-by: Pantelis Antoniou <[email protected]> Acked-by: Paul Walmsley <[email protected]> [[email protected]: updated wit information about the breaking commit] Signed-off-by: Tony Lindgren <[email protected]>
2013-01-07Merge branch 'for-linus' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull namei.h missing include fix from Al Viro. The new use of ESTALE in namei.h can cause compile failures on ARM with certain configurations due to lack of errno.h. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: namei.h: include errno.h
2013-01-07asus-laptop: Fix potential invalid pointer dereferenceMatthew Garrett1-1/+1
The 0-day build testing backend noticed that a string could be dereferenced without validation. Fix that. Signed-off-by: Matthew Garrett <[email protected]>
2013-01-07Update MAINTAINERS entryMatthew Garrett1-1/+1
New job, new address. Signed-off-by: Matthew Garrett <[email protected]>
2013-01-07asus-laptop: Do not call HWRS on initBen Hutchings1-13/+4
Since commit 8871e99f89b7 ('asus-laptop: HRWS/HWRS typo'), module initialisation is very slow on the Asus UL30A. The HWRS method takes about 12 seconds to run, and subsequent initialisation also seems to be delayed. Since we don't really need the result, don't bother calling it on init. Those who are curious can still get the result through the 'infos' device attribute. Update the comment about HWRS in show_infos(). Reported-by: ryan <[email protected]> References: http://bugs.debian.org/692436 Signed-off-by: Ben Hutchings <[email protected]> Signed-off-by: Corentin Chary <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2013-01-07sony-laptop: fix SNC buffer calls when SN06 returns IntegersMattia Dongili1-7/+8
SN06 in some cases returns an Integer instead of a buffer. While the code handling the return value was trying to cope with the difference, the memcpy call was not making any difference between the two types of acpi_object union. This regression was introduced in 3.5. While there also rework the return value logic to improve readability. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=48671 Cc: <[email protected]> Cc: Fabrizio Narni <[email protected]> Cc: <[email protected]> Signed-off-by: Mattia Dongili <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2013-01-07samsung-laptop: Add quirk for broken acpi_video backlight on N250PSeth Forshee1-0/+10
BugLink: http://bugs.launchpad.net/bugs/1086921 Cc: [email protected] # v3.4+ Signed-off-by: Seth Forshee <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2013-01-07acer-wmi: add Aspire 5741G touchpad toggle keySergey Senozhatsky1-0/+1
Add Aspire 5741G KEY_TOUCHPAD_TOGGLE to wmi keymap, preventing "acer_wmi: Unknown key number - 0x85" error. Signed-off-by: Sergey Senozhatsky <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2013-01-07acer-wmi: change to emit touchpad on off keyLee, Chun-Yi1-3/+10
KEY_TOUCHPAD_TOOGLE key is for notice userland change touchpad state via xf86-input-synaptics on the machine that don't toggle touchpad in hardware. But, acer laptop actually toggle touchpad in hardware. So, this patch change to emit KEY_TOUCHPAD_ON/OFF key when acer-wmi grab device state of touchpad. Reference: brc#848270 https://bugzilla.redhat.com/show_bug.cgi?id=848270 Tested-by: Nathanael Noblet <[email protected]> Cc: Carlos Corbacho <[email protected]> Cc: Matthew Garrett <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: Corentin Chary <[email protected]> Cc: Thomas Renninger <[email protected]> Signed-off-by: Lee, Chun-Yi <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2013-01-07acer-wmi: fix obj is NULL but dereferencedLee, Chun-Yi1-21/+25
Fengguang Wu run coccinelle and warns about: drivers/platform/x86/acer-wmi.c:1200:17-21: ERROR: obj is NULL but dereferenced. drivers/platform/x86/acer-wmi.c:891:17-21: ERROR: obj is NULL but dereferenced. drivers/platform/x86/acer-wmi.c:1953:17-21: ERROR: obj is NULL but dereferenced. It causes by the code in patch 987dfbaa65b2c3568b85e29d2598da08a011ee09 doesn't check obj variable should not be NULL. There have risk for dereference a NULL obj, so add this patch to fix. Cc: Carlos Corbacho <[email protected]> Cc: Matthew Garrett <[email protected]> Cc: Dmitry Torokhov <[email protected]> Cc: Corentin Chary <[email protected]> Cc: Thomas Renninger <[email protected]> Signed-off-by: Lee, Chun-Yi <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2013-01-07MAINTAINERS: change the mail address of acer-wmi/msi-laptop maintainerLee, Chun-Yi1-2/+2
Due to I moved to use suse.com mail address, so, add patch to change the mail address in MAINTAINERS file. Cc: Matthew Garrett <[email protected]> Signed-off-by: Lee, Chun-Yi <[email protected]> Signed-off-by: Matthew Garrett <[email protected]>
2013-01-07sctp: fix Kconfig bug in default cookie hmac selectionAlex Elder1-1/+1
Commit 0d0863b02002 ("sctp: Change defaults on cookie hmac selection") added a "choice" to the sctp Kconfig file. It introduced a bug which led to an infinite loop when while running "make oldconfig". The problem is that the wrong symbol was defined as the default value for the choice. Using the correct value gets rid of the infinite loop. Note: if CONFIG_SCTP_COOKIE_HMAC_SHA1=y was present in the input config file, both that and CONFIG_SCTP_COOKIE_HMAC_MD5=y be present in the generated config file. Signed-off-by: Alex Elder <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2013-01-07Merge tag 'ext4_for_linus' of ↵Linus Torvalds2-2/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4 Pull ext4 regression fixes from Ted Ts'o: "Bug fixes, including two regressions introduced in v3.8. The most serious of these regressions is a buffer cache leak." * tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: ext4: remove duplicate call to ext4_bread() in ext4_init_new_dir() ext4: release buffer in failed path in dx_probe() ext4: fix configuration dependencies for ext4 ACLs and security labels
2013-01-07EDAC: Cleanup device deregistering pathLans Zhang1-12/+6
Use device_unregister to replace put_device + device_del for cleanup, and fix the potential use after free. Signed-off-by: Lans Zhang <[email protected]> Signed-off-by: Borislav Petkov <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.