aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-08-24netfs: Fix missing iterator reset on retry of short readDavid Howells1-0/+1
Fix netfs_rreq_perform_resubmissions() to reset before retrying a short read, otherwise the wrong part of the output buffer will be used. Fixes: 92b6cc5d1e7c ("netfs: Add iov_iters to (sub)requests to describe various buffers") Signed-off-by: David Howells <[email protected]> Link: https://lore.kernel.org/r/[email protected] cc: Steve French <[email protected]> cc: Paulo Alcantara <[email protected]> cc: Jeff Layton <[email protected]> cc: [email protected] cc: [email protected] cc: [email protected] Signed-off-by: Christian Brauner <[email protected]>
2024-08-24netfs: Fix trimming of streaming-write folios in netfs_inval_folio()David Howells1-15/+35
When netfslib writes to a folio that it doesn't have data for, but that data exists on the server, it will make a 'streaming write' whereby it stores data in a folio that is marked dirty, but not uptodate. When it does this, it attaches a record to folio->private to track the dirty region. When truncate() or fallocate() wants to invalidate part of such a folio, it will call into ->invalidate_folio(), specifying the part of the folio that is to be invalidated. netfs_invalidate_folio(), on behalf of the filesystem, must then determine how to trim the streaming write record. In a couple of cases, however, it does this incorrectly (the reduce-length and move-start cases are switched over and don't, in any case, calculate the value correctly). Fix this by making the logic tree more obvious and fixing the cases. Fixes: 9ebff83e6481 ("netfs: Prep to use folio->private for write grouping and streaming write") Signed-off-by: David Howells <[email protected]> Link: https://lore.kernel.org/r/[email protected] cc: Matthew Wilcox (Oracle) <[email protected]> cc: Pankaj Raghav <[email protected]> cc: Jeff Layton <[email protected]> cc: Marc Dionne <[email protected]> cc: [email protected] cc: [email protected] cc: [email protected] cc: [email protected] Signed-off-by: Christian Brauner <[email protected]>
2024-08-24netfs: Fix netfs_release_folio() to say no if folio dirtyDavid Howells1-0/+3
Fix netfs_release_folio() to say no (ie. return false) if the folio is dirty (analogous with iomap's behaviour). Without this, it will say yes to the release of a dirty page by split_huge_page_to_list_to_order(), which will result in the loss of untruncated data in the folio. Without this, the generic/075 and generic/112 xfstests (both fsx-based tests) fail with minimum folio size patches applied[1]. Fixes: c1ec4d7c2e13 ("netfs: Provide invalidate_folio and release_folio calls") Signed-off-by: David Howells <[email protected]> Link: https://lore.kernel.org/r/[email protected]/ [1] Link: https://lore.kernel.org/r/[email protected] cc: Matthew Wilcox (Oracle) <[email protected]> cc: Pankaj Raghav <[email protected]> cc: Jeff Layton <[email protected]> cc: Marc Dionne <[email protected]> cc: [email protected] cc: [email protected] cc: [email protected] cc: [email protected] Signed-off-by: Christian Brauner <[email protected]>
2024-08-24afs: Fix post-setattr file edit to do truncation correctlyDavid Howells1-3/+8
At the end of an kAFS RPC operation, there is an "edit" phase (originally intended for post-directory modification ops to edit the local image) that the setattr VFS op uses to fix up the pagecache if the RPC that requested truncation of a file was successful. afs_setattr_edit_file() calls truncate_setsize() which sets i_size, expands the pagecache if needed and truncates the pagecache. The first two of those, however, are redundant as they've already been done by afs_setattr_success() under the io_lock and the first is also done under the callback lock (cb_lock). Fix afs_setattr_edit_file() to call truncate_pagecache() instead (which is called by truncate_setsize(), thereby skipping the redundant parts. Fixes: 100ccd18bb41 ("netfs: Optimise away reads above the point at which there can be no data") Signed-off-by: David Howells <[email protected]> Link: https://lore.kernel.org/r/[email protected] cc: Matthew Wilcox (Oracle) <[email protected]> cc: Pankaj Raghav <[email protected]> cc: Jeff Layton <[email protected]> cc: Marc Dionne <[email protected]> cc: [email protected] cc: [email protected] cc: [email protected] cc: [email protected] Signed-off-by: Christian Brauner <[email protected]>
2024-08-24mm: Fix missing folio invalidation calls during truncationDavid Howells1-2/+2
When AS_RELEASE_ALWAYS is set on a mapping, the ->release_folio() and ->invalidate_folio() calls should be invoked even if PG_private and PG_private_2 aren't set. This is used by netfslib to keep track of the point above which reads can be skipped in favour of just zeroing pagecache locally. There are a couple of places in truncation in which invalidation is only called when folio_has_private() is true. Fix these to check folio_needs_release() instead. Without this, the generic/075 and generic/112 xfstests (both fsx-based tests) fail with minimum folio size patches applied[1]. Fixes: b4fa966f03b7 ("mm, netfs, fscache: stop read optimisation when folio removed from pagecache") Signed-off-by: David Howells <[email protected]> Link: https://lore.kernel.org/r/[email protected]/ [1] Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Matthew Wilcox (Oracle) <[email protected]> cc: Matthew Wilcox (Oracle) <[email protected]> cc: Pankaj Raghav <[email protected]> cc: Jeff Layton <[email protected]> cc: Marc Dionne <[email protected]> cc: [email protected] cc: [email protected] cc: [email protected] cc: [email protected] Signed-off-by: Christian Brauner <[email protected]>
2024-08-24Merge patch series "ovl: simplify ovl_parse_param_lowerdir()"Christian Brauner1-39/+12
Simplify and fix overlayfs layer parsing so the maximum of 500 layers can be used. * patches from https://lore.kernel.org/r/[email protected]: ovl: ovl_parse_param_lowerdir: Add missed '\n' for pr_err ovl: fix wrong lowerdir number check for parameter Opt_lowerdir ovl: pass string to ovl_parse_layer() Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Brauner <[email protected]>
2024-08-24Merge tag 'cgroup-for-6.11-rc4-fixes' of ↵Linus Torvalds1-17/+21
git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup Pull cgroup fixes from Tejun Heo: "Three patches addressing cpuset corner cases" * tag 'cgroup-for-6.11-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup: cgroup/cpuset: Eliminate unncessary sched domains rebuilds in hotplug cgroup/cpuset: Clear effective_xcpus on cpus_allowed clearing only if cpus.exclusive not set cgroup/cpuset: fix panic caused by partcmd_update
2024-08-24Merge tag 'wq-for-6.11-rc4-fixes' of ↵Linus Torvalds2-24/+28
git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq Pull workqueue fixes from Tejun Heo: "Nothing too interesting. One patch to remove spurious warning and others to address static checker warnings" * tag 'wq-for-6.11-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq: workqueue: Correct declaration of cpu_pwq in struct workqueue_struct workqueue: Fix spruious data race in __flush_work() workqueue: Remove incorrect "WARN_ON_ONCE(!list_empty(&worker->entry));" from dying worker workqueue: Fix UBSAN 'subtraction overflow' error in shift_and_mask() workqueue: doc: Fix function name, remove markers
2024-08-24Merge tag 'mips-fixes_6.11_1' of ↵Linus Torvalds2-8/+11
git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux Pull MIPS fixes from Thomas Bogendoerfer: - Set correct timer mode on Loongson64 - Only request r4k clockevent interrupt on one CPU * tag 'mips-fixes_6.11_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: MIPS: cevt-r4k: Don't call get_c0_compare_int if timer irq is installed MIPS: Loongson64: Set timer mode in cpu-probe
2024-08-24usb: cdnsp: fix for Link TRB with TCPawel Laszczak2-0/+31
Stop Endpoint command on LINK TRB with TC bit set to 1 causes that internal cycle bit can have incorrect state after command complete. In consequence empty transfer ring can be incorrectly detected when EP is resumed. NOP TRB before LINK TRB avoid such scenario. Stop Endpoint command is then on NOP TRB and internal cycle bit is not changed and have correct value. Fixes: 3d82904559f4 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") cc: <[email protected]> Signed-off-by: Pawel Laszczak <[email protected]> Reviewed-by: Peter Chen <[email protected]> Link: https://lore.kernel.org/r/PH7PR07MB953878279F375CCCE6C6F40FDD8E2@PH7PR07MB9538.namprd07.prod.outlook.com Signed-off-by: Greg Kroah-Hartman <[email protected]>
2024-08-24Merge tag 'arm64-fixes' of ↵Linus Torvalds6-5/+33
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 kvm fixes from Catalin Marinas: - Don't drop references on LPIs that weren't visited by the vgic-debug iterator - Cure lock ordering issue when unregistering vgic redistributors - Fix for misaligned stage-2 mappings when VMs are backed by hugetlb pages - Treat SGI registers as UNDEFINED if a VM hasn't been configured for GICv3 * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3 KVM: arm64: Ensure canonical IPA is hugepage-aligned when handling fault KVM: arm64: vgic: Don't hold config_lock while unregistering redistributors KVM: arm64: vgic-debug: Don't put unmarked LPIs
2024-08-24Merge tag 'nfs-for-6.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfsLinus Torvalds7-21/+61
Pull NFS client fixes from Anna Schumaker: - Fix rpcrdma refcounting in xa_alloc - Fix rpcrdma usage of XA_FLAGS_ALLOC - Fix requesting FATTR4_WORD2_OPEN_ARGUMENTS - Fix attribute bitmap decoder to handle a 3rd word - Add reschedule points when returning delegations to avoid soft lockups - Fix clearing layout segments in layoutreturn - Avoid unnecessary rescanning of the per-server delegation list * tag 'nfs-for-6.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfs: NFS: Avoid unnecessary rescanning of the per-server delegation list NFSv4: Fix clearing of layout segments in layoutreturn NFSv4: Add missing rescheduling points in nfs_client_return_marked_delegations nfs: fix bitmap decoder to handle a 3rd word nfs: fix the fetch of FATTR4_OPEN_ARGUMENTS rpcrdma: Trace connection registration and unregistration rpcrdma: Use XA_FLAGS_ALLOC instead of XA_FLAGS_ALLOC1 rpcrdma: Device kref is over-incremented on error from xa_alloc
2024-08-24Merge tag 'v6.11-rc4-client-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds7-13/+20
Pull smb client fixes from Steve French: - fix refcount leak (can cause rmmod fail) - fix byte range locking problem with cached reads - fix for mount failure if reparse point unrecognized - minor typo * tag 'v6.11-rc4-client-fixes' of git://git.samba.org/sfrench/cifs-2.6: smb/client: fix typo: GlobalMid_Sem -> GlobalMid_Lock smb: client: ignore unhandled reparse tags smb3: fix problem unloading module due to leaked refcount on shutdown smb3: fix broken cached reads when posix locks
2024-08-24Merge tag 'input-for-v6.11-rc4' of ↵Linus Torvalds9-30/+54
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a tweak to uinput interface to reject requests with abnormally large number of slots. 100 slots/contacts should be enough for real devices - support for FocalTech FT8201 added to the edt-ft5x06 driver - tweaks to i8042 to handle more devices that have issue with its emulation - Synaptics touchpad switched to native SMbus/RMI mode on HP Elitebook 840 G2 - other minor fixes * tag 'input-for-v6.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: himax_hx83112b - fix incorrect size when reading product ID Input: i8042 - use new forcenorestore quirk to replace old buggy quirk combination Input: i8042 - add forcenorestore quirk to leave controller untouched even on s3 Input: i8042 - add Fujitsu Lifebook E756 to i8042 quirk table Input: uinput - reject requests with unreasonable number of slots Input: edt-ft5x06 - add support for FocalTech FT8201 dt-bindings: input: touchscreen: edt-ft5x06: Document FT8201 support Input: adc-joystick - fix optional value handling Input: synaptics - enable SMBus for HP Elitebook 840 G2 Input: ads7846 - ratelimit the spi_sync error message
2024-08-24Merge tag 'drm-fixes-2024-08-24' of https://gitlab.freedesktop.org/drm/kernelLinus Torvalds43-90/+334
Pull drm fixes from Dave Airlie: "Weekly fixes. xe and msm are the major groups, with amdgpu/i915/nouveau having smaller bits. xe has a bunch of hw workaround fixes that were found to be missing, so that is why there are a bunch of scattered fixes, and one larger one. But overall size doesn't look too out of the ordinary. msm: - virtual plane fixes: - drop yuv on hw where not supported - csc vs yuv format fix - rotation fix - fix fb cleanup on close - reset phy before link training - fix visual corruption at 4K - fix NULL ptr crash on hotplug - simplify debug macros - sc7180 fix - adreno firmware name error path fix amdgpu: - GFX10 firmware loading fix - SDMA 5.2 fix - Debugfs parameter validation fix - eGPU hotplug fix i915: - fix HDCP timeouts nouveau: - fix SG_DEBUG crash xe: - Fix OA format masks which were breaking build with gcc-5 - Fix opregion leak (Lucas) - Fix OA sysfs entry (Ashutosh) - Fix VM dma-resv lock (Brost) - Fix tile fini sequence (Brost) - Prevent UAF around preempt fence (Auld) - Fix DGFX display suspend/resume (Maarten) - Many Xe/Xe2 critical workarounds (Auld, Ngai-Mint, Bommu, Tejas, Daniele) - Fix devm/drmm issues (Daniele) - Fix missing workqueue destroy in xe_gt_pagefault (Stuart) - Drop HW fence pointer to HW fence ctx (Brost) - Free job before xe_exec_queue_put (Brost)" * tag 'drm-fixes-2024-08-24' of https://gitlab.freedesktop.org/drm/kernel: (35 commits) drm/xe: Free job before xe_exec_queue_put drm/xe: Drop HW fence pointer to HW fence ctx drm/xe: Fix missing workqueue destroy in xe_gt_pagefault drm/amdgpu: fix eGPU hotplug regression drm/amdgpu: Validate TA binary size drm/amdgpu/sdma5.2: limit wptr workaround to sdma 5.2.1 drm/amdgpu: fixing rlc firmware loading failure issue drm/xe/uc: Use devm to register cleanup that includes exec_queues drm/xe: use devm instead of drmm for managed bo drm/xe/xe2hpg: Add Wa_14021821874 drm/xe: fix WA 14018094691 drm/xe/xe2: Add Wa_15015404425 drm/xe/xe2: Make subsequent L2 flush sequential drm/xe/xe2lpg: Extend workaround 14021402888 drm/xe/xe2lpm: Extend Wa_16021639441 drm/xe/bmg: implement Wa_16023588340 drm/xe/oa/uapi: Make bit masks unsigned drm/xe/display: Make display suspend/resume work on discrete drm/xe: prevent UAF around preempt fence drm/xe: Fix tile fini sequence ...
2024-08-24Merge tag 'block-6.11-20240823' of git://git.kernel.dk/linuxLinus Torvalds4-15/+20
Pull block fixes from Jens Axboe: - NVMe pull request via Keith - Remove unused struct field (Nilay) - Fix fabrics keep-alive teardown order (Ming) - Write zeroes fixes (John) * tag 'block-6.11-20240823' of git://git.kernel.dk/linux: nvme: Remove unused field nvme: move stopping keep-alive into nvme_uninit_ctrl() block: Drop NULL check in bdev_write_zeroes_sectors() block: Read max write zeroes once for __blkdev_issue_write_zeroes()
2024-08-24Merge tag 'io_uring-6.11-20240823' of git://git.kernel.dk/linuxLinus Torvalds1-3/+6
Pull io_uring fix from Jens Axboe: "Just a single fix for provided buffer validation" * tag 'io_uring-6.11-20240823' of git://git.kernel.dk/linux: io_uring/kbuf: sanitize peek buffer setup
2024-08-24Merge tag 'acpi-6.11-rc5' of ↵Linus Torvalds4-0/+32
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull ACPI fix from Rafael Wysocki: "Fix backlight control on a Dell All In One system where a backlight controller board is attached to a UART port and the dell-uart backlight driver binds to it, but the backlight is actually controlled by other means (Hans de Goede)" * tag 'acpi-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI: video: Add backlight=native quirk for Dell OptiPlex 7760 AIO platform/x86: dell-uart-backlight: Use acpi_video_get_backlight_type() ACPI: video: Add Dell UART backlight controller detection
2024-08-24Merge tag 'thermal-6.11-rc5' of ↵Linus Torvalds2-12/+17
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fixes from Rafael Wysocki: "These fix error handling in the thermal debug code and OF node reference leaks in the thermal OF driver. Specifics: - Use IS_ERR() in checks of debugfs_create_dir() return value instead of checking it against NULL in the thermal debug code (Yang Ruibin) - Fix three OF node reference leaks in thermal_of (Krzysztof Kozlowski)" * tag 'thermal-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: of: Fix OF node leak in of_thermal_zone_find() error paths thermal: of: Fix OF node leak in thermal_of_zone_register() thermal: of: Fix OF node leak in thermal_of_trips_init() error path thermal/debugfs: Fix the NULL vs IS_ERR() confusion in debugfs_create_dir()
2024-08-24Merge tag 'mmc-v6.11-rc1' of ↵Linus Torvalds3-8/+17
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull mmc fixes from Ulf Hansson: "MMC core: - Fix NULL dereference for mmc_test on allocation failure MMC host: - dw_mmc: Fix support for deferred probe for biu/ciu clocks - mtk-sd: Fix CMD8 support when fragile tuning settings" * tag 'mmc-v6.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mmc_test: Fix NULL dereference on allocation failure mmc: dw_mmc: allow biu and ciu clocks to defer mmc: mtk-sd: receive cmd8 data when hs400 tuning fail
2024-08-24Merge tag 'spi-fix-v6.11-rc3' of ↵Linus Torvalds7-33/+106
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi fixes from Mark Brown: "A small collection of fixes here, all driver specific and none of them too serious. For whatever reason runtime PM seems to have been causing a bunch of issues recently" * tag 'spi-fix-v6.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: spi: pxa2xx: Move PM runtime handling to the glue drivers spi: pxa2xx: Do not override dev->platform_data on probe spi: spi-fsl-lpspi: limit PRESCALE bit in TCR register spi: spi-cadence-quadspi: Fix OSPI NOR failures during system resume spi: zynqmp-gqspi: Scale timeout by data size
2024-08-23Bluetooth: hci_core: Fix not handling hibernation actionsLuiz Augusto von Dentz1-2/+8
This fixes not handling hibernation actions on suspend notifier so they are treated in the same way as regular suspend actions. Fixes: 9952d90ea288 ("Bluetooth: Handle PM_SUSPEND_PREPARE and PM_POST_SUSPEND") Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2024-08-23Bluetooth: btnxpuart: Fix random crash seen while removing driverNeeraj Sanjay Kale1-2/+18
This fixes the random kernel crash seen while removing the driver, when running the load/unload test over multiple iterations. 1) modprobe btnxpuart 2) hciconfig hci0 reset 3) hciconfig (check hci0 interface up with valid BD address) 4) modprobe -r btnxpuart Repeat steps 1 to 4 The ps_wakeup() call in btnxpuart_close() schedules the psdata->work(), which gets scheduled after module is removed, causing a kernel crash. This hidden issue got highlighted after enabling Power Save by default in 4183a7be7700 (Bluetooth: btnxpuart: Enable Power Save feature on startup) The new ps_cleanup() deasserts UART break immediately while closing serdev device, cancels any scheduled ps_work and destroys the ps_lock mutex. [ 85.884604] Unable to handle kernel paging request at virtual address ffffd4a61638f258 [ 85.884624] Mem abort info: [ 85.884625] ESR = 0x0000000086000007 [ 85.884628] EC = 0x21: IABT (current EL), IL = 32 bits [ 85.884633] SET = 0, FnV = 0 [ 85.884636] EA = 0, S1PTW = 0 [ 85.884638] FSC = 0x07: level 3 translation fault [ 85.884642] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000041dd0000 [ 85.884646] [ffffd4a61638f258] pgd=1000000095fff003, p4d=1000000095fff003, pud=100000004823d003, pmd=100000004823e003, pte=0000000000000000 [ 85.884662] Internal error: Oops: 0000000086000007 [#1] PREEMPT SMP [ 85.890932] Modules linked in: algif_hash algif_skcipher af_alg overlay fsl_jr_uio caam_jr caamkeyblob_desc caamhash_desc caamalg_desc crypto_engine authenc libdes crct10dif_ce polyval_ce polyval_generic snd_soc_imx_spdif snd_soc_imx_card snd_soc_ak5558 snd_soc_ak4458 caam secvio error snd_soc_fsl_spdif snd_soc_fsl_micfil snd_soc_fsl_sai snd_soc_fsl_utils gpio_ir_recv rc_core fuse [last unloaded: btnxpuart(O)] [ 85.927297] CPU: 1 PID: 67 Comm: kworker/1:3 Tainted: G O 6.1.36+g937b1be4345a #1 [ 85.936176] Hardware name: FSL i.MX8MM EVK board (DT) [ 85.936182] Workqueue: events 0xffffd4a61638f380 [ 85.936198] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 85.952817] pc : 0xffffd4a61638f258 [ 85.952823] lr : 0xffffd4a61638f258 [ 85.952827] sp : ffff8000084fbd70 [ 85.952829] x29: ffff8000084fbd70 x28: 0000000000000000 x27: 0000000000000000 [ 85.963112] x26: ffffd4a69133f000 x25: ffff4bf1c8540990 x24: ffff4bf215b87305 [ 85.963119] x23: ffff4bf215b87300 x22: ffff4bf1c85409d0 x21: ffff4bf1c8540970 [ 85.977382] x20: 0000000000000000 x19: ffff4bf1c8540880 x18: 0000000000000000 [ 85.977391] x17: 0000000000000000 x16: 0000000000000133 x15: 0000ffffe2217090 [ 85.977399] x14: 0000000000000001 x13: 0000000000000133 x12: 0000000000000139 [ 85.977407] x11: 0000000000000001 x10: 0000000000000a60 x9 : ffff8000084fbc50 [ 85.977417] x8 : ffff4bf215b7d000 x7 : ffff4bf215b83b40 x6 : 00000000000003e8 [ 85.977424] x5 : 00000000410fd030 x4 : 0000000000000000 x3 : 0000000000000000 [ 85.977432] x2 : 0000000000000000 x1 : ffff4bf1c4265880 x0 : 0000000000000000 [ 85.977443] Call trace: [ 85.977446] 0xffffd4a61638f258 [ 85.977451] 0xffffd4a61638f3e8 [ 85.977455] process_one_work+0x1d4/0x330 [ 85.977464] worker_thread+0x6c/0x430 [ 85.977471] kthread+0x108/0x10c [ 85.977476] ret_from_fork+0x10/0x20 [ 85.977488] Code: bad PC value [ 85.977491] ---[ end trace 0000000000000000 ]--- Preset since v6.9.11 Fixes: 86d55f124b52 ("Bluetooth: btnxpuart: Deasset UART break before closing serdev device") Signed-off-by: Neeraj Sanjay Kale <[email protected]> Reviewed-by: Paul Menzel <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2024-08-23Bluetooth: btintel: Allow configuring drive strength of BRIKiran K1-0/+124
BRI (Bluetooth Radio Interface) traffic from CNVr to CNVi was found causing cross talk step errors to WiFi. To avoid this potential issue OEM platforms can replace BRI resistor to adjust the BRI response line drive strength. During the *setup*, driver reads the drive strength value from uefi variable and passes it to the controller via vendor specific command with opcode 0xfc0a. dmesg: .. [21.982720] Bluetooth: hci0: Bootloader timestamp 2023.33 buildtype 1 build 45995 [21.984250] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291-iml.sfi [21.984255] Bluetooth: hci0: Boot Address: 0x30099000 [21.984256] Bluetooth: hci0: Firmware Version: 160-24.24 [22.011501] Bluetooth: hci0: Waiting for firmware download to complete [22.011518] Bluetooth: hci0: Firmware loaded in 26624 usecs [22.011584] Bluetooth: hci0: Waiting for device to boot [22.013546] Bluetooth: hci0: Malformed MSFT vendor event: 0x02 [22.013552] Bluetooth: hci0: Device booted in 1967 usecs ... [22.013792] Bluetooth: hci0: dsbr: enable: 0x01 value: 0x0b ... [22.015027] Bluetooth: hci0: Found device firmware: intel/ibt-0190-0291.sfi [22.015041] Bluetooth: hci0: Boot Address: 0x10000800 [22.015043] Bluetooth: hci0: Firmware Version: 160-24.24 [22.395821] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [22.395828] Bluetooth: BNEP filters: protocol multicast ... Signed-off-by: Kiran K <[email protected]> Signed-off-by: Luiz Augusto von Dentz <[email protected]>
2024-08-23ovl: ovl_parse_param_lowerdir: Add missed '\n' for pr_errZhihao Cheng1-2/+2
Add '\n' for pr_err in function ovl_parse_param_lowerdir(), which ensures that error message is displayed at once. Fixes: b36a5780cb44 ("ovl: modify layer parameter parsing") Signed-off-by: Zhihao Cheng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Brauner <[email protected]>
2024-08-23ovl: fix wrong lowerdir number check for parameter Opt_lowerdirZhihao Cheng1-33/+7
The max count of lowerdir is OVL_MAX_STACK[500], which is broken by commit 37f32f526438("ovl: fix memory leak in ovl_parse_param()") for parameter Opt_lowerdir. Since commit 819829f0319a("ovl: refactor layer parsing helpers") and commit 24e16e385f22("ovl: add support for appending lowerdirs one by one") added check ovl_mount_dir_check() in function ovl_parse_param_lowerdir(), the 'ctx->nr' should be smaller than OVL_MAX_STACK, after commit 37f32f526438("ovl: fix memory leak in ovl_parse_param()") is applied, the 'ctx->nr' is updated before the check ovl_mount_dir_check(), which leads the max count of lowerdir to become 499 for parameter Opt_lowerdir. Fix it by replacing lower layers parsing code with the existing helper function ovl_parse_layer(). Fixes: 37f32f526438 ("ovl: fix memory leak in ovl_parse_param()") Signed-off-by: Zhihao Cheng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Amir Goldstein <[email protected]> Signed-off-by: Christian Brauner <[email protected]>
2024-08-23ovl: pass string to ovl_parse_layer()Christian Brauner1-4/+3
So it can be used for parsing the Opt_lowerdir. Signed-off-by: Zhihao Cheng <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Christian Brauner <[email protected]>
2024-08-23nfsd: prevent panic for nfsv4.0 closed files in nfs4_show_openOlga Kornievskaia1-9/+12
Prior to commit 3f29cc82a84c ("nfsd: split sc_status out of sc_type") states_show() relied on sc_type field to be of valid type before calling into a subfunction to show content of a particular stateid. From that commit, we split the validity of the stateid into sc_status and no longer changed sc_type to 0 while unhashing the stateid. This resulted in kernel oopsing for nfsv4.0 opens that stay around and in nfs4_show_open() would derefence sc_file which was NULL. Instead, for closed open stateids forgo displaying information that relies of having a valid sc_file. To reproduce: mount the server with 4.0, read and close a file and then on the server cat /proc/fs/nfsd/clients/2/states [ 513.590804] Call trace: [ 513.590925] _raw_spin_lock+0xcc/0x160 [ 513.591119] nfs4_show_open+0x78/0x2c0 [nfsd] [ 513.591412] states_show+0x44c/0x488 [nfsd] [ 513.591681] seq_read_iter+0x5d8/0x760 [ 513.591896] seq_read+0x188/0x208 [ 513.592075] vfs_read+0x148/0x470 [ 513.592241] ksys_read+0xcc/0x178 Fixes: 3f29cc82a84c ("nfsd: split sc_status out of sc_type") Signed-off-by: Olga Kornievskaia <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: Chuck Lever <[email protected]>
2024-08-23pinctrl: starfive: jh7110: Correct the level trigger configuration of iev ↵Hal Feng1-2/+2
register A mistake was made in level trigger register configuration. Correct it. Fixes: 447976ab62c5 ("pinctrl: starfive: Add StarFive JH7110 sys controller driver") Signed-off-by: Hal Feng <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2024-08-23pinctrl: qcom: x1e80100: Fix special pin offsetsKonrad Dybcio1-4/+4
Remove the erroneus 0x100000 offset to prevent the boards from crashing on pin state setting, as well as for the intended state changes to take effect. Fixes: 05e4941d97ef ("pinctrl: qcom: Add X1E80100 pinctrl driver") Signed-off-by: Konrad Dybcio <[email protected]> Reviewed-by: Abel Vesa <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2024-08-23cpufreq/amd-pstate-ut: Don't check for highest perf matching on prefcoreMario Limonciello1-5/+8
If a system is using preferred cores the highest perf will be inconsistent as it can change from system events. Skip the checks for it. Fixes: e571a5e2068e ("cpufreq: amd-pstate: Update amd-pstate preferred core ranking dynamically") Reviewed-by: Gautham R. Shenoy <[email protected]> Signed-off-by: Mario Limonciello <[email protected]>
2024-08-23pinctrl: mediatek: common-v2: Fix broken bias-disable for PULL_PU_PD_RSEL_TYPENícolas F. R. A. Prado1-26/+29
Despite its name, commit fed74d75277d ("pinctrl: mediatek: common-v2: Fix bias-disable for PULL_PU_PD_RSEL_TYPE") actually broke bias-disable for PULL_PU_PD_RSEL_TYPE. mtk_pinconf_bias_set_combo() tries every bias method supported by the pin until one succeeds. For PULL_PU_PD_RSEL_TYPE pins, before the breaking commit, mtk_pinconf_bias_set_rsel() would be called first to try and set the RSEL value (as well as PU and PD), and if that failed, the only other valid option was that bias-disable was specified, which would then be handled by calling mtk_pinconf_bias_set_pu_pd() and disabling both PU and PD. The breaking commit misunderstood this logic and added an early "return 0" in mtk_pinconf_bias_set_rsel(). The result was that in the bias-disable case, the bias was left unchanged, since by returning success, mtk_pinconf_bias_set_combo() no longer tried calling mtk_pinconf_bias_set_pu_pd() to disable the bias. Since the logic for configuring bias-disable on PULL_PU_PD_RSEL_TYPE pins required mtk_pinconf_bias_set_rsel() to fail first, in that case, an error was printed to the log, eg: mt8195-pinctrl 10005000.pinctrl: Not support rsel value 0 Ohm for pin = 29 (GPIO29) This is what the breaking commit actually got rid of, and likely part of the reason why that commit was thought to be fixing functionality, while in reality it was breaking it. Instead of simply reverting that commit, restore the functionality but in a way that avoids the error from being printed and makes the code less confusing: * Return 0 explicitly if a bias method was successful * Introduce an extra function mtk_pinconf_bias_set_pu_pd_rsel() that calls both mtk_pinconf_bias_set_rsel() (only if needed) and mtk_pinconf_bias_set_pu_pd() * And analogously for the corresponding getters Fixes: fed74d75277d ("pinctrl: mediatek: common-v2: Fix bias-disable for PULL_PU_PD_RSEL_TYPE") Signed-off-by: Nícolas F. R. A. Prado <[email protected]> Link: https://lore.kernel.org/20240808-mtk-rsel-bias-disable-fix-v1-1-1b4e85bf596c@collabora.com Signed-off-by: Linus Walleij <[email protected]>
2024-08-23pinctrl: single: fix potential NULL dereference in pcs_get_function()Ma Ke1-0/+2
pinmux_generic_get_function() can return NULL and the pointer 'function' was dereferenced without checking against NULL. Add checking of pointer 'function' in pcs_get_function(). Found by code review. Cc: [email protected] Fixes: 571aec4df5b7 ("pinctrl: single: Use generic pinmux helpers for managing functions") Signed-off-by: Ma Ke <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2024-08-23pinctrl: at91: make it work with current gpiolibThomas Blocher1-1/+4
pinctrl-at91 currently does not support the gpio-groups devicetree property and has no pin-range. Because of this at91 gpios stopped working since patch commit 2ab73c6d8323fa1e ("gpio: Support GPIO controllers without pin-ranges") This was discussed in the patches commit fc328a7d1fcce263 ("gpio: Revert regression in sysfs-gpio (gpiolib.c)") commit 56e337f2cf132632 ("Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"") As a workaround manually set pin-range via gpiochip_add_pin_range() until a) pinctrl-at91 is reworked to support devicetree gpio-groups b) another solution as mentioned in commit 56e337f2cf132632 ("Revert "gpio: Revert regression in sysfs-gpio (gpiolib.c)"") is found Signed-off-by: Thomas Blocher <[email protected]> Link: https://lore.kernel.org/[email protected] Signed-off-by: Linus Walleij <[email protected]>
2024-08-23Revert "drm/ttm: increase ttm pre-fault value to PMD size"Alex Deucher1-4/+0
This reverts commit 0ddd2ae586d28e521d37393364d989ce118802e0. This patch causes sluggishness and stuttering in graphical apps. Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/3564 Link: https://www.spinics.net/lists/dri-devel/msg457005.html Signed-off-by: Alex Deucher <[email protected]> Cc: Zhu Lingshan <[email protected]> Cc: Christian König <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2024-08-23net: mana: Fix race of mana_hwc_post_rx_wqe and new hwc responseHaiyang Zhang1-28/+34
The mana_hwc_rx_event_handler() / mana_hwc_handle_resp() calls complete(&ctx->comp_event) before posting the wqe back. It's possible that other callers, like mana_create_txq(), start the next round of mana_hwc_send_request() before the posting of wqe. And if the HW is fast enough to respond, it can hit no_wqe error on the HW channel, then the response message is lost. The mana driver may fail to create queues and open, because of waiting for the HW response and timed out. Sample dmesg: [ 528.610840] mana 39d4:00:02.0: HWC: Request timed out! [ 528.614452] mana 39d4:00:02.0: Failed to send mana message: -110, 0x0 [ 528.618326] mana 39d4:00:02.0 enP14804s2: Failed to create WQ object: -110 To fix it, move posting of rx wqe before complete(&ctx->comp_event). Cc: [email protected] Fixes: ca9c54d2d6a5 ("net: mana: Add a driver for Microsoft Azure Network Adapter (MANA)") Signed-off-by: Haiyang Zhang <[email protected]> Reviewed-by: Long Li <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-08-23platform/x86/amd/pmc: Extend support for PMC features on new AMD platformShyam Sundar S K1-0/+2
PMC driver has capability to get the idle mask values and STB data from the PMFW. Extend this support to the platforms that belong to family 1Ah model 60h series. Co-developed-by: Sanket Goswami <[email protected]> Signed-off-by: Sanket Goswami <[email protected]> Signed-off-by: Shyam Sundar S K <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
2024-08-23platform/x86/amd/pmc: Fix SMU command submission path on new AMD platformShyam Sundar S K1-0/+1
The commit 426463d94d45 ("platform/x86/amd/pmc: Send OS_HINT command for new AMD platform") was introduced to enable sending mailbox commands to PMFW on newer platforms. However, it was later discovered that the commit did not configure the correct message port ID (i.e., S2D or PMC). Without this configuration, all command submissions to PMFW are treated as invalid, leading to command failures. To address this issue, the CPU ID association for the new platform needs to be added in amd_pmc_get_ip_info(). This ensures that the correct SMU port IDs are selected. Fixes: 426463d94d45 ("platform/x86/amd/pmc: Send OS_HINT command for new AMD platform") Co-developed-by: Sanket Goswami <[email protected]> Signed-off-by: Sanket Goswami <[email protected]> Signed-off-by: Shyam Sundar S K <[email protected]> Reviewed-by: Mario Limonciello <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Ilpo Järvinen <[email protected]> Signed-off-by: Ilpo Järvinen <[email protected]>
2024-08-23backing-file: convert to using fops->splice_writeEd Tsai1-1/+4
Filesystems may define their own splice write. Therefore, use the file fops instead of invoking iter_file_splice_write() directly. Signed-off-by: Ed Tsai <[email protected]> Link: https://lore.kernel.org/r/[email protected] Fixes: 5ca73468612d ("fuse: implement splice read/write passthrough") Reviewed-by: Amir Goldstein <[email protected]> Signed-off-by: Christian Brauner <[email protected]>
2024-08-23Merge tag 'pwrseq-fixes-for-v6.11-rc5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux Pull power sequencing fix from Bartosz Golaszewski: - request the wlan-enable GPIO "as-is" to fix an issue with the wifi module being already powered up before linux boots * tag 'pwrseq-fixes-for-v6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: power: sequencing: request the WLAN enable GPIO as-is
2024-08-23Merge tag 'pmdomain-v6.11-rc2' of ↵Linus Torvalds2-7/+3
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm Pull pmdomain fixes from Ulf Hansson: - imx: Remove duplicated clocks for scu power domain - imx: Wait for SSAR to complete power-on for i.MX93 power domain * tag 'pmdomain-v6.11-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: pmdomain: imx: wait SSAR when i.MX93 power domain on pmdomain: imx: scu-pd: Remove duplicated clocks
2024-08-23net: drop special comment styleJohannes Berg3-39/+0
As we discussed in the room at netdevconf earlier this week, drop the requirement for special comment style for netdev. For checkpatch, the general check accepts both right now, so simply drop the special request there as well. Acked-by: Stephen Hemminger <[email protected]> Signed-off-by: Johannes Berg <[email protected]> Acked-by: Jakub Kicinski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-08-23iommu: Handle iommu faults for a bad iopf setupPranjal Shrivastava3-41/+87
The iommu_report_device_fault function was updated to return void while assuming that drivers only need to call iommu_report_device_fault() for reporting an iopf. This implementation causes following problems: 1. The drivers rely on the core code to call it's page_reponse, however, when a fault is received and no fault capable domain is attached / iopf_param is NULL, the ops->page_response is NOT called causing the device to stall in case the fault type was PAGE_REQ. 2. The arm_smmu_v3 driver relies on the returned value to log errors returning void from iommu_report_device_fault causes these events to be missed while logging. Modify the iommu_report_device_fault function to return -EINVAL for cases where no fault capable domain is attached or iopf_param was NULL and calls back to the driver (ops->page_response) in case the fault type was IOMMU_FAULT_PAGE_REQ. The returned value can be used by the drivers to log the fault/event as needed. Reported-by: Kunkun Jiang <[email protected]> Closes: https://lore.kernel.org/all/[email protected]/ Fixes: 3dfa64aecbaf ("iommu: Make iommu_report_device_fault() return void") Signed-off-by: Jason Gunthorpe <[email protected]> Signed-off-by: Pranjal Shrivastava <[email protected]> Reviewed-by: Jason Gunthorpe <[email protected]> Reviewed-by: Lu Baolu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Joerg Roedel <[email protected]>
2024-08-23Merge tag 'kvmarm-fixes-6.11-2' of ↵Catalin Marinas20-41/+75
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into for-next/fixes KVM/arm64 fixes for 6.11, round #2 - Don't drop references on LPIs that weren't visited by the vgic-debug iterator - Cure lock ordering issue when unregistering vgic redistributors - Fix for misaligned stage-2 mappings when VMs are backed by hugetlb pages - Treat SGI registers as UNDEFINED if a VM hasn't been configured for GICv3 * tag 'kvmarm-fixes-6.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm: KVM: arm64: Make ICC_*SGI*_EL1 undef in the absence of a vGICv3 KVM: arm64: Ensure canonical IPA is hugepage-aligned when handling fault KVM: arm64: vgic: Don't hold config_lock while unregistering redistributors KVM: arm64: vgic-debug: Don't put unmarked LPIs KVM: arm64: vgic: Hold config_lock while tearing down a CPU interface KVM: selftests: arm64: Correct feature test for S1PIE in get-reg-list KVM: arm64: Tidying up PAuth code in KVM KVM: arm64: vgic-debug: Exit the iterator properly w/o LPI KVM: arm64: Enforce dependency on an ARMv8.4-aware toolchain docs: KVM: Fix register ID of SPSR_FIQ KVM: arm64: vgic: fix unexpected unlock sparse warnings KVM: arm64: fix kdoc warnings in W=1 builds KVM: arm64: fix override-init warnings in W=1 builds KVM: arm64: free kvm->arch.nested_mmus with kvfree()
2024-08-23Merge tag 'asoc-fix-v6.11-rc3' of ↵Takashi Iwai17-26/+88
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus ASoC: Fixes for v6.11 A relatively large collection of fixes here, all driver specific and none of them particularly major, plus one MAINTAINERS update. There's been a bunch of work on module autoloading from several people.
2024-08-23Merge tag 'ata-6.11-rc5' of ↵Linus Torvalds1-10/+20
git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux Pull ata fixes from Damien Le Moal: - Fix the max segment size and max number of segments supported by the pata_macio driver to fix issues with BIO splitting leading to an overflow of the adapter DMA table (from Michael) - Related to the previous fix, change BUG_ON() calls for incorrect command buffer segmentation into WARN_ON() and an error return (from Michael) * tag 'ata-6.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: ata: pata_macio: Use WARN instead of BUG ata: pata_macio: Fix DMA table overflow
2024-08-22scsi: sd: Ignore command SYNCHRONIZE CACHE error if format in progressYihang Li1-5/+7
If formatting a suspended disk (such as formatting with different DIF type), the disk will be resuming first, and then the format command will submit to the disk through SG_IO ioctl. When the disk is processing the format command, the system does not submit other commands to the disk. Therefore, the system attempts to suspend the disk again and sends the SYNCHRONIZE CACHE command. However, the SYNCHRONIZE CACHE command will fail because the disk is in the formatting process. This will cause the runtime_status of the disk to error and it is difficult for user to recover it. Error info like: [ 669.925325] sd 6:0:6:0: [sdg] Synchronizing SCSI cache [ 670.202371] sd 6:0:6:0: [sdg] Synchronize Cache(10) failed: Result: hostbyte=0x00 driverbyte=DRIVER_OK [ 670.216300] sd 6:0:6:0: [sdg] Sense Key : 0x2 [current] [ 670.221860] sd 6:0:6:0: [sdg] ASC=0x4 ASCQ=0x4 To solve the issue, ignore the error and return success/0 when format is in progress. Cc: [email protected] Signed-off-by: Yihang Li <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Bart Van Assche <[email protected]> Reviewed-by: Damien Le Moal <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2024-08-22scsi: aacraid: Fix double-free on probe failureBen Hutchings1-0/+2
aac_probe_one() calls hardware-specific init functions through the aac_driver_ident::init pointer, all of which eventually call down to aac_init_adapter(). If aac_init_adapter() fails after allocating memory for aac_dev::queues, it frees the memory but does not clear that member. After the hardware-specific init function returns an error, aac_probe_one() goes down an error path that frees the memory pointed to by aac_dev::queues, resulting.in a double-free. Reported-by: Michael Gordon <[email protected]> Link: https://bugs.debian.org/1075855 Fixes: 8e0c5ebde82b ("[SCSI] aacraid: Newer adapter communication iterface support") Signed-off-by: Ben Hutchings <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Martin K. Petersen <[email protected]>
2024-08-22scsi: lpfc: Fix overflow build issueSherry Yang1-1/+1
Build failed while enabling "CONFIG_GCOV_KERNEL=y" and "CONFIG_GCOV_PROFILE_ALL=y" with following error: BUILDSTDERR: drivers/scsi/lpfc/lpfc_bsg.c: In function 'lpfc_get_cgnbuf_info': BUILDSTDERR: ./include/linux/fortify-string.h:114:33: error: '__builtin_memcpy' accessing 18446744073709551615 bytes at offsets 0 and 0 overlaps 9223372036854775807 bytes at offset -9223372036854775808 [-Werror=restrict] BUILDSTDERR: 114 | #define __underlying_memcpy __builtin_memcpy BUILDSTDERR: | ^ BUILDSTDERR: ./include/linux/fortify-string.h:637:9: note: in expansion of macro '__underlying_memcpy' BUILDSTDERR: 637 | __underlying_##op(p, q, __fortify_size); \ BUILDSTDERR: | ^~~~~~~~~~~~~ BUILDSTDERR: ./include/linux/fortify-string.h:682:26: note: in expansion of macro '__fortify_memcpy_chk' BUILDSTDERR: 682 | #define memcpy(p, q, s) __fortify_memcpy_chk(p, q, s, \ BUILDSTDERR: | ^~~~~~~~~~~~~~~~~~~~ BUILDSTDERR: drivers/scsi/lpfc/lpfc_bsg.c:5468:9: note: in expansion of macro 'memcpy' BUILDSTDERR: 5468 | memcpy(cgn_buff, cp, cinfosz); BUILDSTDERR: | ^~~~~~ This happens from the commit 06bb7fc0feee ("kbuild: turn on -Wrestrict by default"). Address this issue by using size_t type. Signed-off-by: Sherry Yang <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Justin Tee <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2024-08-22pktgen: use cpus_read_lock() in pg_net_init()Eric Dumazet1-1/+3
I have seen the WARN_ON(smp_processor_id() != cpu) firing in pktgen_thread_worker() during tests. We must use cpus_read_lock()/cpus_read_unlock() around the for_each_online_cpu(cpu) loop. While we are at it use WARN_ON_ONCE() to avoid a possible syslog flood. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Eric Dumazet <[email protected]> Link: https://patch.msgid.link/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.