Age | Commit message (Collapse) | Author | Files | Lines |
|
Comet Lake is the new 10th Gen Intel processor. From the perspective
of Intel PMU, there is nothing changed compared with Sky Lake.
Share the perf code with Sky Lake.
The patch has been tested on real hardware.
Signed-off-by: Kan Liang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: https://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Signed-off-by: Ingo Molnar <[email protected]>
|
|
If an ICMP packet comes in on the UDP socket backing an AF_RXRPC socket as
the UDP socket is being shut down, rxrpc_error_report() may get called to
deal with it after sk_user_data on the UDP socket has been cleared, leading
to a NULL pointer access when this local endpoint record gets accessed.
Fix this by just returning immediately if sk_user_data was NULL.
The oops looks like the following:
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
...
RIP: 0010:rxrpc_error_report+0x1bd/0x6a9
...
Call Trace:
? sock_queue_err_skb+0xbd/0xde
? __udp4_lib_err+0x313/0x34d
__udp4_lib_err+0x313/0x34d
icmp_unreach+0x1ee/0x207
icmp_rcv+0x25b/0x28f
ip_protocol_deliver_rcu+0x95/0x10e
ip_local_deliver+0xe9/0x148
__netif_receive_skb_one_core+0x52/0x6e
process_backlog+0xdc/0x177
net_rx_action+0xf9/0x270
__do_softirq+0x1b6/0x39a
? smpboot_register_percpu_thread+0xce/0xce
run_ksoftirqd+0x1d/0x42
smpboot_thread_fn+0x19e/0x1b3
kthread+0xf1/0xf6
? kthread_delayed_work_timer_fn+0x83/0x83
ret_from_fork+0x24/0x30
Fixes: 17926a79320a ("[AF_RXRPC]: Provide secure RxRPC sockets for use by userspace and kernel both")
Reported-by: [email protected]
Signed-off-by: David Howells <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
sdma will hang once sequence number to be polled reaches 0x1000_0000
Reviewed-by: Christian König <[email protected]>
Signed-off-by: Xiaojie Yuan <[email protected]>
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
Bail from the pci_driver probe function instead of from the drm_driver
load function.
This avoid /dev/dri/card0 temporarily getting registered and then
unregistered again, sending unwanted add / remove udev events to
userspace.
Specifically this avoids triggering the (userspace) bug fixed by this
plymouth merge-request:
https://gitlab.freedesktop.org/plymouth/plymouth/merge_requests/59
Note that despite that being a userspace bug, not sending unnecessary
udev events is a good idea in general.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1490490
Reviewed-by: Daniel Vetter <[email protected]>
Signed-off-by: Hans de Goede <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
This reverts commit 6f7fe9a93e6c09bf988c5059403f5f88e17e21e6.
This breaks some boards. Maybe just enable this on PPC for
now?
Bug: https://bugzilla.kernel.org/show_bug.cgi?id=205147
Signed-off-by: Alex Deucher <[email protected]>
Cc: [email protected]
|
|
rmi_process_interrupt_requests() calls handle_nested_irq() for
each interrupt status bit it finds. If the irq domain mapping for
this bit had not yet been set up, then it ends up calling
handle_nested_irq(0), which causes a NULL pointer dereference.
There's already code that masks the irq_status bits coming out of the
hardware with current_irq_mask, presumably to avoid this situation.
However current_irq_mask seems to more reflect the actual mask set
in the hardware rather than the IRQs software has set up and registered
for. For example, in rmi_driver_reset_handler(), the current_irq_mask
is initialized based on what is read from the hardware. If the reset
value of this mask enables IRQs that Linux has not set up yet, then
we end up in this situation.
There appears to be a third unused bitmask that used to serve this
purpose, fn_irq_bits. Use that bitmask instead of current_irq_mask
to avoid calling handle_nested_irq() on IRQs that have not yet been
set up.
Signed-off-by: Evan Green <[email protected]>
Reviewed-by: Andrew Duggan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Cc: [email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Pull NFS client bugfixes from Anna Schumaker:
"Stable bugfixes:
- Fix O_DIRECT accounting of number of bytes read/written # v4.1+
Other fixes:
- Fix nfsi->nrequests count error on nfs_inode_remove_request()
- Remove redundant mirror tracking in O_DIRECT
- Fix leak of clp->cl_acceptor string
- Fix race to sk_err after xs_error_report"
* tag 'nfs-for-5.4-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC: fix race to sk_err after xs_error_report
NFSv4: Fix leak of clp->cl_acceptor string
NFS: Remove redundant mirror tracking in O_DIRECT
NFS: Fix O_DIRECT accounting of number of bytes read/written
nfs: Fix nfsi->nrequests count error on nfs_inode_remove_request
|
|
Pull cifs fixes from Steve French:
"Eight small SMB3 fixes, four for stable, and important fix for the
recent regression introduced by filesystem timestamp range patches"
* tag '5.4-rc2-smb3' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Force reval dentry if LOOKUP_REVAL flag is set
CIFS: Force revalidate inode when dentry is stale
smb3: Fix regression in time handling
smb3: remove noisy debug message and minor cleanup
CIFS: Gracefully handle QueryInfo errors during open
cifs: use cifsInodeInfo->open_file_lock while iterating to avoid a panic
fs: cifs: mute -Wunused-const-variable message
smb3: cleanup some recent endian errors spotted by updated sparse
|
|
On msm8998, vblank timeouts are observed because the DSI controller is not
reset properly, which ends up stalling the MDP. This is because the reset
logic is not correct per the hardware documentation.
The documentation states that after asserting reset, software should wait
some time (no indication of how long), or poll the status register until it
returns 0 before deasserting reset.
wmb() is insufficient for this purpose since it just ensures ordering, not
timing between writes. Since asserting and deasserting reset occurs on the
same register, ordering is already guaranteed by the architecture, making
the wmb extraneous.
Since we would define a timeout for polling the status register to avoid a
possible infinite loop, lets just use a static delay of 20 ms, since 16.666
ms is the time available to process one frame at 60 fps.
Fixes: a689554ba6ed ("drm/msm: Initial add DSI connector support")
Cc: Hai Li <[email protected]>
Cc: Rob Clark <[email protected]>
Signed-off-by: Jeffrey Hugo <[email protected]>
Reviewed-by: Sean Paul <[email protected]>
[seanpaul renamed RESET_DELAY to DSI_RESET_TOGGLE_DELAY_MS]
Signed-off-by: Sean Paul <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux
Pull module fixes from Jessica Yu:
"Code cleanups and kbuild/namespace related fixups from Masahiro.
Most importantly, it fixes a namespace-related modpost issue for
external module builds
- Fix broken external module builds due to a modpost bug in
read_dump(), where the namespace was not being strdup'd and
sym->namespace would be set to bogus data.
- Various namespace-related kbuild fixes and cleanups thanks to
Masahiro Yamada"
* tag 'modules-for-v5.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/jeyu/linux:
doc: move namespaces.rst from kbuild/ to core-api/
nsdeps: make generated patches independent of locale
nsdeps: fix hashbang of scripts/nsdeps
kbuild: fix build error of 'make nsdeps' in clean tree
module: rename __kstrtab_ns_* to __kstrtabns_* to avoid symbol conflict
modpost: fix broken sym->namespace for external module builds
module: swap the order of symbol.namespace
scripts: add_namespace: Fix coccicheck failed
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull Hyper-V fixes from Sasha Levin:
"Two fixes from Dexuan Cui:
- Fix a (harmless) warning when building vmbus without
CONFIG_PM_SLEEP
- Fix for a memory leak (and optimization) in the hyperv mouse code"
* tag 'hyperv-fixes-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: vmbus: Fix harmless building warnings without CONFIG_PM_SLEEP
HID: hyperv: Use in-place iterator API in the channel callback
|
|
The kernel image map is created using PMD pages, which can include
some extra space beyond what's actually needed. Round the size of the
memory hole we search for up to the next PMD boundary, to be certain
all of the space to be mapped is usable RAM and includes no reserved
areas.
Signed-off-by: Steve Wahl <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Dave Hansen <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Cc: Baoquan He <[email protected]>
Cc: Brijesh Singh <[email protected]>
Cc: [email protected]
Cc: Feng Tang <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jordan Borgner <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: Thomas Gleixner <[email protected]>
Cc: x86-ml <[email protected]>
Cc: Zhenzhong Duan <[email protected]>
Link: https://lkml.kernel.org/r/df4f49f05c0c27f108234eb93db5c613d09ea62e.1569358539.git.steve.wahl@hpe.com
|
|
Our hardware (UV aka Superdome Flex) has address ranges marked
reserved by the BIOS. Access to these ranges is caught as an error,
causing the BIOS to halt the system.
Initial page tables mapped a large range of physical addresses that
were not checked against the list of BIOS reserved addresses, and
sometimes included reserved addresses in part of the mapped range.
Including the reserved range in the map allowed processor speculative
accesses to the reserved range, triggering a BIOS halt.
Used early in booting, the page table level2_kernel_pgt addresses 1
GiB divided into 2 MiB pages, and it was set up to linearly map a full
1 GiB of physical addresses that included the physical address range
of the kernel image, as chosen by KASLR. But this also included a
large range of unused addresses on either side of the kernel image.
And unlike the kernel image's physical address range, this extra
mapped space was not checked against the BIOS tables of usable RAM
addresses. So there were times when the addresses chosen by KASLR
would result in processor accessible mappings of BIOS reserved
physical addresses.
The kernel code did not directly access any of this extra mapped
space, but having it mapped allowed the processor to issue speculative
accesses into reserved memory, causing system halts.
This was encountered somewhat rarely on a normal system boot, and much
more often when starting the crash kernel if "crashkernel=512M,high"
was specified on the command line (this heavily restricts the physical
address of the crash kernel, in our case usually within 1 GiB of
reserved space).
The solution is to invalidate the pages of this table outside the kernel
image's space before the page table is activated. It fixes this problem
on our hardware.
[ bp: Touchups. ]
Signed-off-by: Steve Wahl <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Acked-by: Dave Hansen <[email protected]>
Acked-by: Kirill A. Shutemov <[email protected]>
Cc: Baoquan He <[email protected]>
Cc: Brijesh Singh <[email protected]>
Cc: [email protected]
Cc: Feng Tang <[email protected]>
Cc: "H. Peter Anvin" <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jordan Borgner <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: [email protected]
Cc: [email protected]
Cc: [email protected]
Cc: Thomas Gleixner <[email protected]>
Cc: x86-ml <[email protected]>
Cc: Zhenzhong Duan <[email protected]>
Link: https://lkml.kernel.org/r/9c011ee51b081534a7a15065b1681d200298b530.1569358539.git.steve.wahl@hpe.com
|
|
We export the entire kernel address space (i.e. the whole of the TTBR1
address range) via /proc/kcore. The kc_vaddr_to_offset() and
kc_offset_to_vaddr() macros are intended to convert between a kernel
virtual address and its offset relative to the start of the TTBR1
address space.
Prior to commit:
14c127c957c1c607 ("arm64: mm: Flip kernel VA space")
... the offset was calculated relative to VA_START, which at the time
was the start of the TTBR1 address space. At this time, PAGE_OFFSET
pointed to the high half of the TTBR1 address space where arm64's
linear map lived.
That commit swapped the position of VA_START and PAGE_OFFSET, but
failed to update kc_vaddr_to_offset() or kc_offset_to_vaddr(), so
since then the two macros behave incorrectly.
Note that VA_START was subsequently renamed to PAGE_END in commit:
77ad4ce69321abbe ("arm64: memory: rename VA_START to PAGE_END")
As the generic implementations of the two macros calculate the offset
relative to PAGE_OFFSET (which is now the start of the TTBR1 address
space), we can delete the arm64 implementation and use those.
Fixes: 14c127c957c1c607 ("arm64: mm: Flip kernel VA space")
Reviewed-by: James Morse <[email protected]>
Reviewed-by: Mark Rutland <[email protected]>
Signed-off-by: Chris von Recklinghausen <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Describe the fallthrough pseudo-keyword.
Convert the coding-style.rst example to the keyword style.
Add description and links to deprecated.rst.
Miguel Ojeda comments on the eventual [[fallthrough]] syntax:
"Note that C17/C18 does not have [[fallthrough]].
C++17 introduced it, as it is mentioned above. I would keep the
__attribute__((fallthrough)) -> [[fallthrough]] change you did,
though, since that is indeed the standard syntax (given the paragraph
references C++17).
I was told by Aaron Ballman (who is proposing them for C) that it is
more or less likely that it becomes standardized in C2x. However, it
is still not added to the draft (other attributes are already,
though). See N2268 and N2269:
http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2268.pdf (fallthrough)
http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2269.pdf (attributes in general)"
Signed-off-by: Joe Perches <[email protected]>
Acked-by: Nick Desaulniers <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Reserve the pseudo keyword 'fallthrough' for the ability to convert the
various case block /* fallthrough */ style comments to appear to be an
actual reserved word with the same gcc case block missing fallthrough
warning capability.
All switch/case blocks now should end in one of:
break;
fallthrough;
goto <label>;
return [expression];
continue;
In C mode, GCC supports the __fallthrough__ attribute since 7.1,
the same time the warning and the comment parsing were introduced.
fallthrough devolves to an empty "do {} while (0)" if the compiler
version (any version less than gcc 7) does not support the attribute.
Signed-off-by: Joe Perches <[email protected]>
Acked-by: Peter Zijlstra (Intel) <[email protected]>
Suggested-by: Dan Carpenter <[email protected]>
Cc: Miguel Ojeda <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
fallthrough will become a pseudo reserved keyword so this only use of
fallthrough is better renamed to allow it.
Signed-off-by: Joe Perches <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Reviewed-by: Kees Cook <[email protected]>
Acked-by: Neil Horman <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull drm fixes from Dave Airlie:
"The regular fixes pull for rc3. The i915 team found some fixes they
(or I) missed for rc1, which is why this is a bit bigger than usual,
otherwise there is a single amdgpu fix, some spi panel aliases, and a
bridge fix.
i915:
- execlist access fixes
- list deletion fix
- CML display fix
- HSW workaround extension to GT2
- chicken bit whitelist
- GGTT resume issue
- SKL GPU hangs for Vulkan compute
amdgpu:
- memory leak fix
panel:
- spi aliases
tc358767:
- bridge artifacts fix"
* tag 'drm-fixes-2019-10-11' of git://anongit.freedesktop.org/drm/drm: (22 commits)
drm/bridge: tc358767: fix max_tu_symbol value
drm/i915/gt: execlists->active is serialised by the tasklet
drm/i915/execlists: Protect peeking at execlists->active
drm/i915: Fixup preempt-to-busy vs reset of a virtual request
drm/i915: Only enqueue already completed requests
drm/i915/execlists: Drop redundant list_del_init(&rq->sched.link)
drm/i915/cml: Add second PCH ID for CMP
drm/amdgpu: fix memory leak
drm/panel: tpo-td043mtea1: Fix SPI alias
drm/panel: tpo-td028ttec1: Fix SPI alias
drm/panel: sony-acx565akm: Fix SPI alias
drm/panel: nec-nl8048hl11: Fix SPI alias
drm/panel: lg-lb035q02: Fix SPI alias
drm/i915: Mark contents as dirty on a write fault
drm/i915: Prevent bonded requests from overtaking each other on preemption
drm/i915: Bump skl+ max plane width to 5k for linear/x-tiled
drm/i915: Verify the engine after acquiring the active.lock
drm/i915: Extend Haswell GT1 PSMI workaround to all
drm/i915: Don't mix srcu tag and negative error codes
drm/i915: Whitelist COMMON_SLICE_CHICKEN2
...
|
|
Pull block fixes from Jens Axboe:
- Fix wbt performance regression introduced with the blk-rq-qos
refactoring (Harshad)
- Fix io_uring fileset removal inadvertently killing the workqueue (me)
- Fix io_uring typo in linked command nonblock submission (Pavel)
- Remove spurious io_uring wakeups on request free (Pavel)
- Fix null_blk zoned command error return (Keith)
- Don't use freezable workqueues for backing_dev, also means we can
revert a previous libata hack (Mika)
- Fix nbd sysfs mutex dropped too soon at removal time (Xiubo)
* tag 'for-linus-20191010' of git://git.kernel.dk/linux-block:
nbd: fix possible sysfs duplicate warning
null_blk: Fix zoned command return code
io_uring: only flush workqueues on fileset removal
io_uring: remove wait loop spurious wakeups
blk-wbt: fix performance regression in wbt scale_up/scale_down
Revert "libata, freezer: avoid block device removal while system is frozen"
bdi: Do not use freezable workqueue
io_uring: fix reversed nonblock flag for link submission
|
|
fix test module build.
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Depending on inlining decisions by the compiler, __get/put_user_fn
might become out of line. Then the compiler is no longer able to tell
that size can only be 1,2,4 or 8 due to the check in __get/put_user
resulting in false positives like
./arch/s390/include/asm/uaccess.h: In function ‘__put_user_fn’:
./arch/s390/include/asm/uaccess.h:113:9: warning: ‘rc’ may be used uninitialized in this function [-Wmaybe-uninitialized]
113 | return rc;
| ^~
./arch/s390/include/asm/uaccess.h: In function ‘__get_user_fn’:
./arch/s390/include/asm/uaccess.h:143:9: warning: ‘rc’ may be used uninitialized in this function [-Wmaybe-uninitialized]
143 | return rc;
| ^~
These functions are supposed to be always inlined. Mark it as such.
Signed-off-by: Christian Borntraeger <[email protected]>
Signed-off-by: Vasily Gorbik <[email protected]>
|
|
Commit 4b708b7b1a2c ("firmware: google: check if size is valid when
decoding VPD data") adds length checks, but the new vpd_decode_entry()
function botched the logic -- it adds the key length twice, instead of
adding the key and value lengths separately.
On my local system, this means vpd.c's vpd_section_create_attribs() hits
an error case after the first attribute it parses, since it's no longer
looking at the correct offset. With this patch, I'm back to seeing all
the correct attributes in /sys/firmware/vpd/...
Fixes: 4b708b7b1a2c ("firmware: google: check if size is valid when decoding VPD data")
Cc: <[email protected]>
Cc: Hung-Te Lin <[email protected]>
Signed-off-by: Brian Norris <[email protected]>
Reviewed-by: Stephen Boyd <[email protected]>
Reviewed-by: Guenter Roeck <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
I'm interested in kdb / kgdb and have sent various fixes over the
years. I'd like to get CCed on patches so I can be aware of them and
also help review.
Signed-off-by: Douglas Anderson <[email protected]>
Acked-by: Daniel Thompson <[email protected]>
Link: https://lore.kernel.org/r/20190920104404.1.I237e68e8825e2d6ac26f8e847f521fe2fcc3705a@changeid
Signed-off-by: Greg Kroah-Hartman <[email protected]>
|
|
The spu_fs_context was not set in fc->fs_private, this caused a crash
when accessing ctx->mode in spufs_create_root().
Fixes: d2e0981c3b9a ("vfs: Convert spufs to use the new mount API")
Signed-off-by: Emmanuel Nicolet <[email protected]>
Signed-off-by: Michael Ellerman <[email protected]>
Acked-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
We have two ways a request can be deferred:
1) It's a regular request that depends on another one
2) It's a timeout that tracks completions
We have a shared helper to determine whether to defer, and that
attempts to make the right decision based on the request. But we
only have some of this information in the caller. Un-share the
two timeout/defer helpers so the caller can use the right one.
Fixes: 5262f567987d ("io_uring: IORING_OP_TIMEOUT support")
Reported-by: yangerkun <[email protected]>
Reviewed-by: Jackie Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Karsten Graul says:
====================
Fixes for -net, addressing two races in SMC receive path and
add a missing cleanup when the link group creating fails with
ISM devices and a VLAN id.
====================
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
smc_rx_recvmsg() first checks if data is available, and then if
RCV_SHUTDOWN is set. There is a race when smc_cdc_msg_recv_action() runs
in between these 2 checks, receives data and sets RCV_SHUTDOWN.
In that case smc_rx_recvmsg() would return from receive without to
process the available data.
Fix that with a final check for data available if RCV_SHUTDOWN is set.
Move the check for data into a function and call it twice.
And use the existing helper smc_rx_data_available().
Fixes: 952310ccf2d8 ("smc: receive data from RMBE")
Reviewed-by: Ursula Braun <[email protected]>
Signed-off-by: Karsten Graul <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
smc_cdc_rxed_any_close_or_senddone() is used as an end condition for the
receive loop. This conflicts with smc_cdc_msg_recv_action() which could
run in parallel and set the bits checked by
smc_cdc_rxed_any_close_or_senddone() before the receive is processed.
In that case we could return from receive with no data, although data is
available. The same applies to smc_rx_wait().
Fix this by checking for RCV_SHUTDOWN only, which is set in
smc_cdc_msg_recv_action() after the receive was actually processed.
Fixes: 952310ccf2d8 ("smc: receive data from RMBE")
Reviewed-by: Ursula Braun <[email protected]>
Signed-off-by: Karsten Graul <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
If creation of an SMCD link group with VLAN id fails, the initial
smc_ism_get_vlan() step has to be reverted as well.
Fixes: c6ba7c9ba43d ("net/smc: add base infrastructure for SMC-D and ISM")
Signed-off-by: Ursula Braun <[email protected]>
Signed-off-by: Karsten Graul <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes
- Fix CML display by adding a missing ID.
- Drop redundant list_del_init
- Only enqueue already completed requests to avoid races
- Fixup preempt-to-busy vs reset of a virtual request
- Protect peeking at execlists->active
- execlists->active is serialised by the tasklet
drm-intel-next-fixes-2019-09-19:
- Extend old HSW workaround to fix some GPU hangs on Haswell GT2
- Fix return error code on GEM mmap.
- White list a chicken bit register for push constants legacy mode on Mesa
- Fix resume issue related to GGTT restore
- Remove incorrect BUG_ON on execlist's schedule-out
- Fix unrecoverable GPU hangs with Vulkan compute workloads on SKL
drm-intel-next-fixes-2019-09-26:
- Fix concurrence on cases where requests where getting retired at same time as resubmitted to HW
- Fix gen9 display resolutions by setting the right max plane width
- Fix GPU hang on preemption
- Mark contents as dirty on a write fault. This was breaking cursor sprite with dumb buffers.
Signed-off-by: Dave Airlie <[email protected]>
From: Rodrigo Vivi <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://people.freedesktop.org/~agd5f/linux into drm-fixes
drm-fixes-5.4-2019-10-09:
amdgpu:
- fix memory leak in bo_list ioctl error path
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull (less than what git shortlog provides):
- SPI Aliases fixes for panels
- One fix for the tc358767 bridge dealing with visual artifacts
Signed-off-by: Dave Airlie <[email protected]>
From: Maxime Ripard <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/20191010105137.j6juxht5dsobgxph@gilmour
|
|
Commit 8960b38932be ("linux/dim: Rename externally used net_dim
members") renamed the net_dim API, removing the "net_" prefix from the
structures and functions. The patch didn't update the net_dim.txt
documentation file.
Fix the documentation so that its examples match the current code.
Fixes: 8960b38932be ("linux/dim: Rename externally used net_dim members", 2019-06-25)
Fixes: c002bd529d71 ("linux/dim: Rename externally exposed macros", 2019-06-25)
Fixes: 4f75da3666c0 ("linux/dim: Move implementation to .c files")
Cc: Tal Gilboa <[email protected]>
Signed-off-by: Jacob Keller <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Mariusz reported that invalid packets are sent after resume from
suspend if jumbo packets are active. It turned out that his BIOS
resets chip settings to non-jumbo on resume. Most chip settings are
re-initialized on resume from suspend by calling rtl_hw_start(),
so let's add configuring jumbo to this function.
There's nothing wrong with the commit marked as fixed, it's just
the first one where the patch applies cleanly.
Fixes: 7366016d2d4c ("r8169: read common register for PCI commit")
Reported-by: Mariusz Bialonczyk <[email protected]>
Tested-by: Mariusz Bialonczyk <[email protected]>
Signed-off-by: Heiner Kallweit <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Since commit 4f8943f80883 ("SUNRPC: Replace direct task wakeups from
softirq context") there has been a race to the value of the sk_err if both
XPRT_SOCK_WAKE_ERROR and XPRT_SOCK_WAKE_DISCONNECT are set. In that case,
we may end up losing the sk_err value that existed when xs_error_report was
called.
Fix this by reverting to the previous behavior: instead of using SO_ERROR
to retrieve the value at a later time (which might also return sk_err_soft),
copy the sk_err value onto struct sock_xprt, and use that value to wake
pending tasks.
Signed-off-by: Benjamin Coddington <[email protected]>
Fixes: 4f8943f80883 ("SUNRPC: Replace direct task wakeups from softirq context")
Signed-off-by: Anna Schumaker <[email protected]>
|
|
Our client can issue multiple SETCLIENTID operations to the same
server in some circumstances. Ensure that calls to
nfs4_proc_setclientid() after the first one do not overwrite the
previously allocated cl_acceptor string.
unreferenced object 0xffff888461031800 (size 32):
comm "mount.nfs", pid 2227, jiffies 4294822467 (age 1407.749s)
hex dump (first 32 bytes):
6e 66 73 40 6b 6c 69 6d 74 2e 69 62 2e 31 30 31 [email protected]
35 67 72 61 6e 67 65 72 2e 6e 65 74 00 00 00 00 5granger.net....
backtrace:
[<00000000ab820188>] __kmalloc+0x128/0x176
[<00000000eeaf4ec8>] gss_stringify_acceptor+0xbd/0x1a7 [auth_rpcgss]
[<00000000e85e3382>] nfs4_proc_setclientid+0x34e/0x46c [nfsv4]
[<000000003d9cf1fa>] nfs40_discover_server_trunking+0x7a/0xed [nfsv4]
[<00000000b81c3787>] nfs4_discover_server_trunking+0x81/0x244 [nfsv4]
[<000000000801b55f>] nfs4_init_client+0x1b0/0x238 [nfsv4]
[<00000000977daf7f>] nfs4_set_client+0xfe/0x14d [nfsv4]
[<0000000053a68a2a>] nfs4_create_server+0x107/0x1db [nfsv4]
[<0000000088262019>] nfs4_remote_mount+0x2c/0x59 [nfsv4]
[<00000000e84a2fd0>] legacy_get_tree+0x2d/0x4c
[<00000000797e947c>] vfs_get_tree+0x20/0xc7
[<00000000ecabaaa8>] fc_mount+0xe/0x36
[<00000000f15fafc2>] vfs_kern_mount+0x74/0x8d
[<00000000a3ff4e26>] nfs_do_root_mount+0x8a/0xa3 [nfsv4]
[<00000000d1c2b337>] nfs4_try_mount+0x58/0xad [nfsv4]
[<000000004c9bddee>] nfs_fs_mount+0x820/0x869 [nfs]
Fixes: f11b2a1cfbf5 ("nfs4: copy acceptor name from context ... ")
Signed-off-by: Chuck Lever <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
GCC 9.x automatically enables support for Loongson MMI instructions when
using some -march= flags, and then errors out when -msoft-float is
specified with:
cc1: error: ‘-mloongson-mmi’ must be used with ‘-mhard-float’
The kernel shouldn't be using these MMI instructions anyway, just as it
doesn't use floating point instructions. Explicitly disable them in
order to fix the build with GCC 9.x.
Signed-off-by: Paul Burton <[email protected]>
Fixes: 3702bba5eb4f ("MIPS: Loongson: Add GCC 4.4 support for Loongson2E")
Fixes: 6f7a251a259e ("MIPS: Loongson: Add basic Loongson 2F support")
Fixes: 5188129b8c9f ("MIPS: Loongson-3: Improve -march option and move it to Platform")
Cc: Huacai Chen <[email protected]>
Cc: Jiaxun Yang <[email protected]>
Cc: [email protected] # v2.6.32+
Cc: [email protected]
|
|
A Golang developer reported MIPS hwcap isn't reflecting instructions
that the processor actually supported so programs can't apply optimized
code at runtime.
Thus we export the ASEs that can be used in userspace programs.
Reported-by: Meng Zhuo <[email protected]>
Signed-off-by: Jiaxun Yang <[email protected]>
Cc: [email protected]
Cc: Paul Burton <[email protected]>
Cc: <[email protected]> # 4.14+
Signed-off-by: Paul Burton <[email protected]>
|
|
Pull xfs fixes from Darrick Wong:
"A couple of small code cleanups and bug fixes for rounding errors,
metadata logging errors, and an extra layer of safeguards against
leaking memory contents.
- Fix a rounding error in the fallocate code
- Minor code cleanups
- Make sure to zero memory buffers before formatting metadata blocks
- Fix a few places where we forgot to log an inode metadata update
- Remove broken error handling that tried to clean up after a failure
but still got it wrong"
* tag 'xfs-5.4-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: move local to extent inode logging into bmap helper
xfs: remove broken error handling on failed attr sf to leaf change
xfs: log the inode on directory sf to block format change
xfs: assure zeroed memory buffers for certain kmem allocations
xfs: removed unused error variable from xchk_refcountbt_rec
xfs: remove unused flags arg from xfs_get_aghdr_buf()
xfs: Fix tail rounding in xfs_alloc_file_space()
|
|
1. nbd_put takes the mutex and drops nbd->ref to 0. It then does
idr_remove and drops the mutex.
2. nbd_genl_connect takes the mutex. idr_find/idr_for_each fails
to find an existing device, so it does nbd_dev_add.
3. just before the nbd_put could call nbd_dev_remove or not finished
totally, but if nbd_dev_add try to add_disk, we can hit:
debugfs: Directory 'nbd1' with parent 'block' already present!
This patch will make sure all the disk add/remove stuff are done
by holding the nbd_index_mutex lock.
Reported-by: Mike Christie <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Xiubo Li <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
As the removed comments say, these aren't DT based devices.
of_dma_configure() is going to stop allowing a NULL DT node and calling
it will no longer work.
The comment is also now out of date as of commit 9ab91e7c5c51 ("arm64:
default to the direct mapping in get_arch_dma_ops"). Direct mapping
is now the default rather than dma_dummy_ops.
According to Stefano and Oleksandr, the only other part needed is
setting the DMA masks and there's no reason to restrict the masks to
32-bits. So set the masks to 64 bits.
Cc: Robin Murphy <[email protected]>
Cc: Julien Grall <[email protected]>
Cc: Nicolas Saenz Julienne <[email protected]>
Cc: Oleksandr Andrushchenko <[email protected]>
Cc: Boris Ostrovsky <[email protected]>
Cc: Juergen Gross <[email protected]>
Cc: Stefano Stabellini <[email protected]>
Cc: Christoph Hellwig <[email protected]>
Cc: [email protected]
Signed-off-by: Rob Herring <[email protected]>
Acked-by: Oleksandr Andrushchenko <[email protected]>
Reviewed-by: Boris Ostrovsky <[email protected]>
Signed-off-by: Boris Ostrovsky <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"Fix build issues in arm/aes-ce"
* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: arm/aes-ce - add dependency on AES library
crypto: arm/aes-ce - build for v8 architecture explicitly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more stabitly fixes, one build warning fix.
- fix inode allocation under NOFS context
- fix leak in fiemap due to concurrent append writes
- fix log-root tree updates
- fix balance convert of single profile on 32bit architectures
- silence false positive warning on old GCCs (code moved in rc1)"
* tag 'for-5.4-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: silence maybe-uninitialized warning in clone_range
btrfs: fix uninitialized ret in ref-verify
btrfs: allocate new inode in NOFS context
btrfs: fix balance convert to single on 32-bit host CPUs
btrfs: fix incorrect updating of log root tree
Btrfs: fix memory leak due to concurrent append writes with fiemap
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull dcache_readdir() fixes from Al Viro:
"The couple of patches you'd been OK with; no hlist conversion yet, and
cursors are still in the list of children"
[ Al is referring to future work to avoid some nasty O(n**2) behavior
with the readdir cursors when you have lots of concurrent readdirs.
This is just a fix for a race with a trivial cleanup - Linus ]
* 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
libfs: take cursors out of list when moving past the end of directory
Fix the locking in dcache_readdir() and friends
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs
Pull mount fixes from Al Viro:
"A couple of regressions from the mount series"
* 'work.mount3' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
vfs: add missing blkdev_put() in get_tree_bdev()
shmem: fix LSM options parsing
|
|
At the end of the v5.3 upstream kernel development cycle, Simon stepped
down from his role as Renesas SoC maintainer.
Remove his maintainership, git repository, and branch from the
MAINTAINERS file, and add an entry to the CREDITS file to honor his
work.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This causes kernel crash when testing lima driver.
Cc: Christian König <[email protected]>
Fixes: b8c036dfc66f ("dma-buf: simplify reservation_object_get_fences_rcu a bit")
Signed-off-by: Qiang Yu <[email protected]>
Reviewed-by: Chris Wilson <[email protected]>
Signed-off-by: Chris Wilson <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Signed-off-by: Christian König <[email protected]>
|
|
xen_auto_xlat_grant_frames.vaddr is definitely NULL in this case.
So the address printing is unnecessary.
Signed-off-by: Fuqian Huang <[email protected]>
Reviewed-by: Juergen Gross <[email protected]>
Signed-off-by: Boris Ostrovsky <[email protected]>
|
|
Another panel that needs 6BPC quirk.
BugLink: https://bugs.launchpad.net/bugs/1819968
Cc: <[email protected]> # v4.8+
Reviewed-by: Alex Deucher <[email protected]>
Signed-off-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|