aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-06-22regmap-irq: Fix offset/index mismatch in read_sub_irq_data()Aidan MacDonald1-1/+2
We need to divide the sub-irq status register offset by register stride to get an index for the status buffer to avoid an out of bounds write when the register stride is greater than 1. Fixes: a2d21848d921 ("regmap: regmap-irq: Add main status register support") Signed-off-by: Aidan MacDonald <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-06-22regmap-irq: Fix a bug in regmap_irq_enable() for type_in_mask chipsAidan MacDonald1-2/+3
When enabling a type_in_mask irq, the type_buf contents must be AND'd with the mask of the IRQ we're enabling to avoid enabling other IRQs by accident, which can happen if several type_in_mask irqs share a mask register. Fixes: bc998a730367 ("regmap: irq: handle HW using separate rising/falling edge interrupts") Signed-off-by: Aidan MacDonald <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]>
2022-06-22powerpc/powernv: wire up rng during setup_archJason A. Donenfeld3-16/+40
The platform's RNG must be available before random_init() in order to be useful for initial seeding, which in turn means that it needs to be called from setup_arch(), rather than from an init call. Complicating things, however, is that POWER8 systems need some per-cpu state and kmalloc, which isn't available at this stage. So we split things up into an early phase and a later opportunistic phase. This commit also removes some noisy log messages that don't add much. Fixes: a4da0d50b2a0 ("powerpc: Implement arch_get_random_long/int() for powernv") Cc: [email protected] # v3.13+ Signed-off-by: Jason A. Donenfeld <[email protected]> Reviewed-by: Christophe Leroy <[email protected]> [mpe: Add of_node_put(), use pnv naming, minor change log editing] Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2022-06-22drm/sun4i: Add DMA mask and segment sizeJernej Skrabec1-0/+8
Kernel occasionally complains that there is mismatch in segment size when trying to render HW decoded videos and rendering them directly with sun4i DRM driver. Following message can be observed on H6 SoC: [ 184.298308] ------------[ cut here ]------------ [ 184.298326] DMA-API: sun4i-drm display-engine: mapping sg segment longer than device claims to support [len=6144000] [max=65536] [ 184.298364] WARNING: CPU: 1 PID: 382 at kernel/dma/debug.c:1162 debug_dma_map_sg+0x2b0/0x350 [ 184.322997] CPU: 1 PID: 382 Comm: ffmpeg Not tainted 5.19.0-rc1+ #1331 [ 184.329533] Hardware name: Tanix TX6 (DT) [ 184.333544] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 184.340512] pc : debug_dma_map_sg+0x2b0/0x350 [ 184.344882] lr : debug_dma_map_sg+0x2b0/0x350 [ 184.349250] sp : ffff800009f33a50 [ 184.352567] x29: ffff800009f33a50 x28: 0000000000010000 x27: ffff000001b86c00 [ 184.359725] x26: ffffffffffffffff x25: ffff000005d8cc80 x24: 0000000000000000 [ 184.366879] x23: ffff80000939ab18 x22: 0000000000000001 x21: 0000000000000001 [ 184.374031] x20: 0000000000000000 x19: ffff0000018a7410 x18: ffffffffffffffff [ 184.381186] x17: 0000000000000000 x16: 0000000000000000 x15: ffffffffffffffff [ 184.388338] x14: 0000000000000001 x13: ffff800009534e86 x12: 6f70707573206f74 [ 184.395493] x11: 20736d69616c6320 x10: 000000000000000a x9 : 0000000000010000 [ 184.402647] x8 : ffff8000093b6d40 x7 : ffff800009f33850 x6 : 000000000000000c [ 184.409800] x5 : ffff0000bf997940 x4 : 0000000000000000 x3 : 0000000000000027 [ 184.416953] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff000003960e80 [ 184.424106] Call trace: [ 184.426556] debug_dma_map_sg+0x2b0/0x350 [ 184.430580] __dma_map_sg_attrs+0xa0/0x110 [ 184.434687] dma_map_sgtable+0x28/0x4c [ 184.438447] vb2_dc_dmabuf_ops_map+0x60/0xcc [ 184.442729] __map_dma_buf+0x2c/0xd4 [ 184.446321] dma_buf_map_attachment+0xa0/0x130 [ 184.450777] drm_gem_prime_import_dev+0x7c/0x18c [ 184.455410] drm_gem_prime_fd_to_handle+0x1b8/0x214 [ 184.460300] drm_prime_fd_to_handle_ioctl+0x2c/0x40 [ 184.465190] drm_ioctl_kernel+0xc4/0x174 [ 184.469123] drm_ioctl+0x204/0x420 [ 184.472534] __arm64_sys_ioctl+0xac/0xf0 [ 184.476474] invoke_syscall+0x48/0x114 [ 184.480240] el0_svc_common.constprop.0+0x44/0xec [ 184.484956] do_el0_svc+0x2c/0xc0 [ 184.488283] el0_svc+0x2c/0x84 [ 184.491354] el0t_64_sync_handler+0x11c/0x150 [ 184.495723] el0t_64_sync+0x18c/0x190 [ 184.499397] ---[ end trace 0000000000000000 ]--- Fix that by setting DMA mask and segment size. Signed-off-by: Jernej Skrabec <[email protected]> Reviewed-by: Samuel Holland <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-06-22drm/vc4: hdmi: Fixed possible integer overflowSaud Farooqui1-1/+1
Multiplying ints and saving it in unsigned long long could lead to integer overflow before being type casted to unsigned long long. Addresses-Coverity: 1505113: Unintentional integer overflow. Signed-off-by: Saud Farooqui <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/PA4P189MB1421E63C0FF3EBF234A80AB38BA79@PA4P189MB1421.EURP189.PROD.OUTLOOK.COM
2022-06-22USB: serial: option: add Quectel EM05-G modemYonglin Tan1-0/+3
The EM05-G modem has 2 USB configurations that are configurable via the AT command AT+QCFG="usbnet",[ 0 | 2 ] which make the modem enumerate with the following interfaces, respectively: "RMNET" : AT + DIAG + NMEA + Modem + QMI "MBIM" : MBIM + AT + DIAG + NMEA + Modem The detailed description of the USB configuration for each mode as follows: RMNET Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 21 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030a Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 5 Cfg#= 1 Atr=a0 MxPwr=500mA I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 6 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=(none) E: Ad=89(I) Atr=03(Int.) MxPS= 8 Ivl=32ms E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms MBIM Mode -------------- T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 16 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(misc ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=2c7c ProdID=030a Rev= 3.18 S: Manufacturer=Quectel S: Product=Quectel EM05-G C:* #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA A: FirstIf#= 0 IfCount= 2 Cls=02(comm.) Sub=0e Prot=00 I:* If#= 3 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option E: Ad=81(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=83(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=02(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=85(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=84(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 5 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option E: Ad=87(I) Atr=03(Int.) MxPS= 10 Ivl=32ms E: Ad=86(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=04(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms I:* If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0e Prot=00 Driver=cdc_mbim E: Ad=89(I) Atr=03(Int.) MxPS= 64 Ivl=32ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim I:* If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=02 Driver=cdc_mbim E: Ad=88(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms E: Ad=05(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms Signed-off-by: Yonglin Tan <[email protected]> Cc: [email protected] Signed-off-by: Johan Hovold <[email protected]>
2022-06-22USB: serial: pl2303: add support for more HXN (G) typesJohan Hovold1-12/+17
Add support for further HXN (G) type devices (GT variant, GL variant, GS variant and GR) and document the bcdDevice mapping. Note that the TA and TB types use the same bcdDevice as some GT and GE variants, respectively, but that the HX status request can be used to determine which is which. Also note that we currently do not distinguish between the various HXN (G) types in the driver but that this may change eventually (e.g. when adding GPIO support). Reported-by: Charles Yeh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Cc: [email protected] # 5.13 Reviewed-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: Johan Hovold <[email protected]>
2022-06-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nfJakub Kicinski5-26/+28
Pablo Neira Ayuso says: ==================== Netfilter fixes for net 1) Use get_random_u32() instead of prandom_u32_state() in nft_meta and nft_numgen, from Florian Westphal. 2) Incorrect list head in nfnetlink_cttimeout in recent update coming from previous development cycle. Also from Florian. 3) Incorrect path to pktgen scripts for nft_concat_range.sh selftest. From Jie2x Zhou. 4) Two fixes for the for nft_fwd and nft_dup egress support, from Florian. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_dup_netdev: add and use recursion counter netfilter: nf_dup_netdev: do not push mac header a second time selftests: netfilter: correct PKTGEN_SCRIPT_PATHS in nft_concat_range.sh netfilter: cttimeout: fix slab-out-of-bounds read typo in cttimeout_net_exit netfilter: use get_random_u32 instead of prandom ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-21net: phy: smsc: Disable Energy Detect Power-Down in interrupt modeLukas Wunner1-2/+4
Simon reports that if two LAN9514 USB adapters are directly connected without an intermediate switch, the link fails to come up and link LEDs remain dark. The issue was introduced by commit 1ce8b37241ed ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling"). The PHY suffers from a known erratum wherein link detection becomes unreliable if Energy Detect Power-Down is used. In poll mode, the driver works around the erratum by briefly disabling EDPD for 640 msec to detect a neighbor, then re-enabling it to save power. In interrupt mode, no interrupt is signaled if EDPD is used by both link partners, so it must not be enabled at all. We'll recoup the power savings by enabling SUSPEND1 mode on affected LAN95xx chips in a forthcoming commit. Fixes: 1ce8b37241ed ("usbnet: smsc95xx: Forward PHY interrupts to PHY driver to avoid polling") Reported-by: Simon Han <[email protected]> Signed-off-by: Lukas Wunner <[email protected]> Link: https://lore.kernel.org/r/439a3f3168c2f9d44b5fd9bb8d2b551711316be6.1655714438.git.lukas@wunner.de Signed-off-by: Jakub Kicinski <[email protected]>
2022-06-21io_uring: fix double poll leak on repollingPavel Begunkov1-0/+1
We have re-polling for partial IO, so a request can be polled twice. If it used two poll entries the first time then on the second io_arm_poll_handler() it will find the old apoll entry and NULL kmalloc()'ed second entry, i.e. apoll->double_poll, so leaking it. Fixes: 10c873334feba ("io_uring: allow re-poll if we made progress") Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/fee2452494222ecc7f1f88c8fb659baef971414a.1655852245.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-06-21io_uring: fix wrong arm_poll error handlingPavel Begunkov1-0/+1
Leaving ip.error set when a request was punted to task_work execution is problematic, don't forget to clear it. Fixes: aa43477b04025 ("io_uring: poll rework") Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/a6c84ef4182c6962380aebe11b35bdcb25b0ccfb.1655852245.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-06-21io_uring: fail links when poll failsPavel Begunkov1-0/+2
Don't forget to cancel all linked requests of poll request when __io_arm_poll_handler() failed. Fixes: aa43477b04025 ("io_uring: poll rework") Signed-off-by: Pavel Begunkov <[email protected]> Link: https://lore.kernel.org/r/a78aad962460f9fdfe4aa4c0b62425c88f9415bc.1655852245.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-06-21ice: ethtool: Prohibit improper channel config for DCBAnatolii Gerasymenko2-5/+47
Do not allow setting less channels, than Traffic Classes there are via ethtool. There must be at least one channel per Traffic Class. If you set less channels, than Traffic Classes there are, then during ice_vsi_rebuild there would be allocated only the requested amount of tx/rx rings in ice_vsi_alloc_arrays. But later in ice_vsi_setup_q_map there would be requested at least one channel per Traffic Class. This results in setting num_rxq > alloc_rxq and num_txq > alloc_txq. Later, there would be a NULL pointer dereference in ice_vsi_map_rings_to_vectors, because we go beyond of rx_rings or tx_rings arrays. Change ice_set_channels() to return error if you try to allocate less channels, than Traffic Classes there are. Change ice_vsi_setup_q_map() and ice_vsi_setup_q_map_mqprio() to return status code instead of void. Add error handling for ice_vsi_setup_q_map() and ice_vsi_setup_q_map_mqprio() in ice_vsi_init() and ice_vsi_cfg_tc(). [53753.889983] INFO: Flow control is disabled for this traffic class (0) on this vsi. [53763.984862] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 [53763.992915] PGD 14b45f5067 P4D 0 [53763.996444] Oops: 0002 [#1] SMP NOPTI [53764.000312] CPU: 12 PID: 30661 Comm: ethtool Kdump: loaded Tainted: GOE --------- - - 4.18.0-240.el8.x86_64 #1 [53764.011825] Hardware name: Intel Corporation WilsonCity/WilsonCity, BIOS WLYDCRB1.SYS.0020.P21.2012150710 12/15/2020 [53764.022584] RIP: 0010:ice_vsi_map_rings_to_vectors+0x7e/0x120 [ice] [53764.029089] Code: 41 0d 0f b7 b7 12 05 00 00 0f b6 d0 44 29 de 44 0f b7 c6 44 01 c2 41 39 d0 7d 2d 4c 8b 47 28 44 0f b7 ce 83 c6 01 4f 8b 04 c8 <49> 89 48 28 4 c 8b 89 b8 01 00 00 4d 89 08 4c 89 81 b8 01 00 00 44 [53764.048379] RSP: 0018:ff550dd88ea47b20 EFLAGS: 00010206 [53764.053884] RAX: 0000000000000002 RBX: 0000000000000004 RCX: ff385ea42fa4a018 [53764.061301] RDX: 0000000000000006 RSI: 0000000000000005 RDI: ff385e9baeedd018 [53764.068717] RBP: 0000000000000010 R08: 0000000000000000 R09: 0000000000000004 [53764.076133] R10: 0000000000000002 R11: 0000000000000004 R12: 0000000000000000 [53764.083553] R13: 0000000000000000 R14: ff385e658fdd9000 R15: ff385e9baeedd018 [53764.090976] FS: 000014872c5b5740(0000) GS:ff385e847f100000(0000) knlGS:0000000000000000 [53764.099362] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [53764.105409] CR2: 0000000000000028 CR3: 0000000a820fa002 CR4: 0000000000761ee0 [53764.112851] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [53764.120301] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [53764.127747] PKRU: 55555554 [53764.130781] Call Trace: [53764.133564] ice_vsi_rebuild+0x611/0x870 [ice] [53764.138341] ice_vsi_recfg_qs+0x94/0x100 [ice] [53764.143116] ice_set_channels+0x1a8/0x3e0 [ice] [53764.147975] ethtool_set_channels+0x14e/0x240 [53764.152667] dev_ethtool+0xd74/0x2a10 [53764.156665] ? __mod_lruvec_state+0x44/0x110 [53764.161280] ? __mod_lruvec_state+0x44/0x110 [53764.165893] ? page_add_file_rmap+0x15/0x170 [53764.170518] ? inet_ioctl+0xd1/0x220 [53764.174445] ? netdev_run_todo+0x5e/0x290 [53764.178808] dev_ioctl+0xb5/0x550 [53764.182485] sock_do_ioctl+0xa0/0x140 [53764.186512] sock_ioctl+0x1a8/0x300 [53764.190367] ? selinux_file_ioctl+0x161/0x200 [53764.195090] do_vfs_ioctl+0xa4/0x640 [53764.199035] ksys_ioctl+0x60/0x90 [53764.202722] __x64_sys_ioctl+0x16/0x20 [53764.206845] do_syscall_64+0x5b/0x1a0 [53764.210887] entry_SYSCALL_64_after_hwframe+0x65/0xca Fixes: 87324e747fde ("ice: Implement ethtool ops for channels") Signed-off-by: Anatolii Gerasymenko <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-06-21ice: ethtool: advertise 1000M speeds properlyAnatolii Gerasymenko1-1/+38
In current implementation ice_update_phy_type enables all link modes for selected speed. This approach doesn't work for 1000M speeds, because both copper (1000baseT) and optical (1000baseX) standards cannot be enabled at once. Fix this, by adding the function `ice_set_phy_type_from_speed()` for 1000M speeds. Fixes: 48cb27f2fd18 ("ice: Implement handlers for ethtool PHY/link operations") Signed-off-by: Anatolii Gerasymenko <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-06-21mips: lantiq: Add missing of_node_put() in irq.cLiang He1-0/+1
In icu_of_init(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Signed-off-by: Liang He <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2022-06-21ice: Fix switchdev rules book keepingWojciech Drewek1-0/+1
Adding two filters with same matching criteria ends up with one rule in hardware with act = ICE_FWD_TO_VSI_LIST. In order to remove them properly we have to keep the information about vsi handle which is used in VSI bitmap (ice_adv_fltr_mgmt_list_entry::vsi_list_info::vsi_map). Fixes: 0d08a441fb1a ("ice: ndo_setup_tc implementation for PF") Reported-by: Sridhar Samudrala <[email protected]> Signed-off-by: Wojciech Drewek <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-06-21PM: hibernate: Use kernel_can_power_off()Dmitry Osipenko1-1/+1
Use new kernel_can_power_off() API instead of legacy pm_power_off global variable to fix regressed hibernation to disk where machine no longer powers off when it should because ACPI power driver transitioned to the new sys-off based API and it doesn't use pm_power_off anymore. Fixes: 98f30d0ecf79 ("ACPI: power: Switch to sys-off handler API") Tested-by: Ken Moffat <[email protected]> Reported-by: Ken Moffat <[email protected]> Signed-off-by: Dmitry Osipenko <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
2022-06-21ice: ignore protocol field in GTP offloadMarcin Szycik1-1/+3
Commit 34a897758efe ("ice: Add support for inner etype in switchdev") added the ability to match on inner ethertype. A side effect of that change is that it is now impossible to add some filters for protocols which do not contain inner ethtype field. tc requires the protocol field to be specified when providing certain other options, e.g. src_ip. This is a problem in case of GTP - when user wants to specify e.g. src_ip, they also need to specify protocol in tc command (otherwise tc fails with: Illegal "src_ip"). Because GTP is a tunnel, the protocol field is treated as inner protocol. GTP does not contain inner ethtype field and the filter cannot be added. To fix this, ignore the ethertype field in case of GTP filters. Fixes: 9a225f81f540 ("ice: Support GTP-U and GTP-C offload in switchdev") Signed-off-by: Marcin Szycik <[email protected]> Tested-by: Sandeep Penigalapati <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2022-06-21dm: do not return early from dm_io_complete if BLK_STS_AGAIN without pollingMike Snitzer1-1/+3
Commit 5291984004edf ("dm: fix bio polling to handle possibile BLK_STS_AGAIN") inadvertently introduced an early return from dm_io_complete() without first queueing the bio to DM if BLK_STS_AGAIN occurs and bio-polling is _not_ being used. Fix this by only returning early from dm_io_complete() if the bio has first been properly queued to DM. Otherwise, the bio will never finish via bio_endio. Fixes: 5291984004edf ("dm: fix bio polling to handle possibile BLK_STS_AGAIN") Cc: [email protected] Signed-off-by: Mike Snitzer <[email protected]>
2022-06-21dm era: commit metadata in postsuspend after worker stopsNikos Tsironis1-1/+7
During postsuspend dm-era does the following: 1. Archives the current era 2. Commits the metadata, as part of the RPC call for archiving the current era 3. Stops the worker Until the worker stops, it might write to the metadata again. Moreover, these writes are not flushed to disk immediately, but are cached by the dm-bufio client, which writes them back asynchronously. As a result, the committed metadata of a suspended dm-era device might not be consistent with the in-core metadata. In some cases, this can result in the corruption of the on-disk metadata. Suppose the following sequence of events: 1. Load a new table, e.g. a snapshot-origin table, to a device with a dm-era table 2. Suspend the device 3. dm-era commits its metadata, but the worker does a few more metadata writes until it stops, as part of digesting an archived writeset 4. These writes are cached by the dm-bufio client 5. Load the dm-era table to another device. 6. The new instance of the dm-era target loads the committed, on-disk metadata, which don't include the extra writes done by the worker after the metadata commit. 7. Resume the new device 8. The new dm-era target instance starts using the metadata 9. Resume the original device 10. The destructor of the old dm-era target instance is called and destroys the dm-bufio client, which results in flushing the cached writes to disk 11. These writes might overwrite the writes done by the new dm-era instance, hence corrupting its metadata. Fix this by committing the metadata after the worker stops running. stop_worker uses flush_workqueue to flush the current work. However, the work item may re-queue itself and flush_workqueue doesn't wait for re-queued works to finish. This could result in the worker changing the metadata after they have been committed, or writing to the metadata concurrently with the commit in the postsuspend thread. Use drain_workqueue instead, which waits until the work and all re-queued works finish. Fixes: eec40579d8487 ("dm: add era target") Cc: [email protected] # v3.15+ Signed-off-by: Nikos Tsironis <[email protected]> Signed-off-by: Mike Snitzer <[email protected]>
2022-06-21Merge tag 'efi-urgent-for-v5.19-1' of ↵Linus Torvalds2-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fixes from Ard Biesheuvel: - remove pointless include of asm/efi.h, which does not exist on ia64 - fix DXE service marshalling prototype for mixed mode * tag 'efi-urgent-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi/x86: libstub: Fix typo in __efi64_argmap* name efi: sysfb_efi: remove unnecessary <asm/efi.h> include
2022-06-21Merge tag 'certs-20220621' of ↵Linus Torvalds11-23/+268
git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs Pull signature checking selftest from David Howells: "The signature checking code, as used by module signing, kexec, etc., is non-FIPS compliant as there is no selftest. For a kernel to be FIPS-compliant, signature checking would have to be tested before being used, and the box would need to panic if it's not available (probably reasonable as simply disabling signature checking would prevent you from loading any driver modules). Deal with this by adding a minimal test. This is split into two patches: the first moves load_certificate_list() to the same place as the X.509 code to make it more accessible internally; the second adds a selftest" * tag 'certs-20220621' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs: certs: Add FIPS selftests certs: Move load_certificate_list() to be with the asymmetric keys code
2022-06-21Merge tag 'for-5.19-rc3-tag' of ↵Linus Torvalds2-9/+51
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: - print more error messages for invalid mount option values - prevent remount with v1 space cache for subpage filesystem - fix hang during unmount when block group reclaim task is running * tag 'for-5.19-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: add error messages to all unrecognized mount options btrfs: prevent remounting to v1 space cache for subpage mount btrfs: fix hang during unmount when block group reclaim task is running
2022-06-21block: pop cached rq before potentially blocking rq_qos_throttle()Jens Axboe1-3/+8
If rq_qos_throttle() ends up blocking, then we will have invalidated and flushed our current plug. Since blk_mq_get_cached_request() hasn't popped the cached request off the plug list just yet, we end holding a pointer to a request that is no longer valid. This insta-crashes with rq->mq_hctx being NULL in the validity checks just after. Pop the request off the cached list before doing rq_qos_throttle() to avoid using a potentially stale request. Fixes: 0a5aa8d161d1 ("block: fix blk_mq_attempt_bio_merge and rq_qos_throttle protection") Reported-by: Dylan Yudaken <[email protected]> Tested-by: Dylan Yudaken <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2022-06-21afs: Fix dynamic root getattrDavid Howells1-1/+2
The recent patch to make afs_getattr consult the server didn't account for the pseudo-inodes employed by the dynamic root-type afs superblock not having a volume or a server to access, and thus an oops occurs if such a directory is stat'd. Fix this by checking to see if the vnode->volume pointer actually points anywhere before following it in afs_getattr(). This can be tested by stat'ing a directory in /afs. It may be sufficient just to do "ls /afs" and the oops looks something like: BUG: kernel NULL pointer dereference, address: 0000000000000020 ... RIP: 0010:afs_getattr+0x8b/0x14b ... Call Trace: <TASK> vfs_statx+0x79/0xf5 vfs_fstatat+0x49/0x62 Fixes: 2aeb8c86d499 ("afs: Fix afs_getattr() to refetch file status if callback break occurred") Reported-by: Marc Dionne <[email protected]> Signed-off-by: David Howells <[email protected]> Reviewed-by: Marc Dionne <[email protected]> Tested-by: Marc Dionne <[email protected]> cc: [email protected] Link: https://lore.kernel.org/r/165408450783.1031787.7941404776393751186.stgit@warthog.procyon.org.uk/ Signed-off-by: Linus Torvalds <[email protected]>
2022-06-21efi/x86: libstub: Fix typo in __efi64_argmap* nameEvgeniy Baskov1-1/+1
The actual name of the DXE services function used is set_memory_space_attributes(), not set_memory_space_descriptor(). Change EFI mixed mode helper macro name to match the function name. Fixes: 31f1a0edff78 ("efi/x86: libstub: Make DXE calls mixed mode safe") Signed-off-by: Evgeniy Baskov <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>
2022-06-21efi: sysfb_efi: remove unnecessary <asm/efi.h> includeJavier Martinez Canillas1-2/+0
Nothing defined in the header is used by drivers/firmware/efi/sysfb_efi.c but also, including it can lead to build errors when built on arches that don't have an asm/efi.h header file. This can happen for example if a driver that is built when COMPILE_TEST is enabled selects the SYSFB symbol, e.g. on powerpc with allyesconfig: drivers/firmware/efi/sysfb_efi.c:29:10: fatal error: asm/efi.h: No such file or directory 29 | #include <asm/efi.h> | ^~~~~~~~~~~ Reported-by: Stephen Rothwell <[email protected]> Signed-off-by: Javier Martinez Canillas <[email protected]> Signed-off-by: Ard Biesheuvel <[email protected]>
2022-06-21f2fs: do not count ENOENT for error caseJaegeuk Kim1-1/+3
Otherwise, we can get a wrong cp_error mark. Cc: <[email protected]> Fixes: a7b8618aa2f0 ("f2fs: avoid infinite loop to flush node pages") Signed-off-by: Jaegeuk Kim <[email protected]>
2022-06-21mips: dts: ingenic: Add TCU clock to x1000/x1830 tcu device nodeAidan MacDonald2-4/+6
This clock is a gate for the TCU hardware block on these SoCs, but it wasn't included in the device tree since the ingenic-tcu driver erroneously did not request it. Reviewed-by: Paul Cercueil <[email protected]> Signed-off-by: Aidan MacDonald <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2022-06-21certs: Add FIPS selftestsDavid Howells5-1/+251
Add some selftests for signature checking when FIPS mode is enabled. These need to be done before we start actually using the signature checking for things and must panic the kernel upon failure. Note that the tests must not check the blacklist lest this provide a way to prevent a kernel from booting by installing a hash of a test key in the appropriate UEFI table. Reported-by: Simo Sorce <[email protected]> Signed-off-by: David Howells <[email protected]> Reviewed-by: Simo Sorce <[email protected]> Reviewed-by: Herbert Xu <[email protected]> cc: [email protected] cc: [email protected] Link: https://lore.kernel.org/r/165515742832.1554877.2073456606206090838.stgit@warthog.procyon.org.uk/
2022-06-21certs: Move load_certificate_list() to be with the asymmetric keys codeDavid Howells7-22/+17
Move load_certificate_list(), which loads a series of binary X.509 certificates from a blob and inserts them as keys into a keyring, to be with the asymmetric keys code that it drives. This makes it easier to add FIPS selftest code in which we need to load up a private keyring for the tests to use. Signed-off-by: David Howells <[email protected]> Reviewed-by: Simo Sorce <[email protected]> Reviewed-by: Herbert Xu <[email protected]> cc: [email protected] cc: [email protected] Link: https://lore.kernel.org/r/165515742145.1554877.13488098107542537203.stgit@warthog.procyon.org.uk/
2022-06-21mips/pic32/pic32mzda: Fix refcount leak bugsLiang He2-1/+9
of_find_matching_node(), of_find_compatible_node() and of_find_node_by_path() will return node pointers with refcout incremented. We should call of_node_put() when they are not used anymore. Signed-off-by: Liang He <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2022-06-21mips: lantiq: xway: Fix refcount leak bug in sysctrlLiang He1-0/+4
In ltq_soc_init(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Signed-off-by: Liang He <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2022-06-21mips: lantiq: falcon: Fix refcount leak bug in sysctrlLiang He1-0/+6
In ltq_soc_init(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Signed-off-by: Liang He <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2022-06-21mips: ralink: Fix refcount leak in of.cLiang He1-0/+2
In plat_of_remap_node(), plat_of_remap_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Signed-off-by: Liang He <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2022-06-21mips: mti-malta: Fix refcount leak in malta-time.cLiang He1-0/+2
In update_gic_frequency_dt(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_node_put() when it is not used anymore. Signed-off-by: Liang He <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2022-06-21arch: mips: generic: Add missing of_node_put() in board-ranchu.cLiang He1-0/+1
In ranchu_measure_hpt_freq(), of_find_compatible_node() will return a node pointer with refcount incremented. We should use of_put_node() when it is not used anymore. Signed-off-by: Liang He <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2022-06-21MIPS: Remove repetitive increase irq_err_counthuhai2-4/+0
commit 979934da9e7a ("[PATCH] mips: update IRQ handling for vr41xx") added a function irq_dispatch, and it'll increase irq_err_count when the get_irq callback returns a negative value, but increase irq_err_count in get_irq was not removed. And also, modpost complains once gpio-vr41xx drivers become modules. ERROR: modpost: "irq_err_count" [drivers/gpio/gpio-vr41xx.ko] undefined! So it would be a good idea to remove repetitive increase irq_err_count in get_irq callback. Fixes: 27fdd325dace ("MIPS: Update VR41xx GPIO driver to use gpiolib") Fixes: 979934da9e7a ("[PATCH] mips: update IRQ handling for vr41xx") Reported-by: k2ci <[email protected]> Signed-off-by: huhai <[email protected]> Signed-off-by: Genjian Zhang <[email protected]> Signed-off-by: Thomas Bogendoerfer <[email protected]>
2022-06-21drm/xen: Add missing VM_DONTEXPAND flag in mmap callbackOleksandr Tyshchenko1-1/+1
With Xen PV Display driver in use the "expected" VM_DONTEXPAND flag is not set (neither explicitly nor implicitly), so the driver hits the code path in drm_gem_mmap_obj() which triggers the WARNING. Signed-off-by: Oleksandr Tyshchenko <[email protected]> Reviewed-by: Oleksandr Andrushchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2022-06-21x86/xen: Remove undefined behavior in setup_features()Julien Grall1-1/+1
1 << 31 is undefined. So switch to 1U << 31. Fixes: 5ead97c84fa7 ("xen: Core Xen implementation") Signed-off-by: Julien Grall <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2022-06-21xen-blkfront: Handle NULL gendiskJason Andryuk1-7/+12
When a VBD is not fully created and then closed, the kernel can have a NULL pointer dereference: The reproducer is trivial: [user@dom0 ~]$ sudo xl block-attach work backend=sys-usb vdev=xvdi target=/dev/sdz [user@dom0 ~]$ xl block-list work Vdev BE handle state evt-ch ring-ref BE-path 51712 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51712 51728 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51728 51744 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51744 51760 0 241 4 -1 -1 /local/domain/0/backend/vbd/241/51760 51840 3 241 3 -1 -1 /local/domain/3/backend/vbd/241/51840 ^ note state, the /dev/sdz doesn't exist in the backend [user@dom0 ~]$ sudo xl block-detach work xvdi [user@dom0 ~]$ xl block-list work Vdev BE handle state evt-ch ring-ref BE-path work is an invalid domain identifier And its console has: BUG: kernel NULL pointer dereference, address: 0000000000000050 PGD 80000000edebb067 P4D 80000000edebb067 PUD edec2067 PMD 0 Oops: 0000 [#1] PREEMPT SMP PTI CPU: 1 PID: 52 Comm: xenwatch Not tainted 5.16.18-2.43.fc32.qubes.x86_64 #1 RIP: 0010:blk_mq_stop_hw_queues+0x5/0x40 Code: 00 48 83 e0 fd 83 c3 01 48 89 85 a8 00 00 00 41 39 5c 24 50 77 c0 5b 5d 41 5c 41 5d c3 c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <8b> 47 50 85 c0 74 32 41 54 49 89 fc 55 53 31 db 49 8b 44 24 48 48 RSP: 0018:ffffc90000bcfe98 EFLAGS: 00010293 RAX: ffffffffc0008370 RBX: 0000000000000005 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 RBP: ffff88800775f000 R08: 0000000000000001 R09: ffff888006e620b8 R10: ffff888006e620b0 R11: f000000000000000 R12: ffff8880bff39000 R13: ffff8880bff39000 R14: 0000000000000000 R15: ffff88800604be00 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 00000000e932e002 CR4: 00000000003706e0 Call Trace: <TASK> blkback_changed+0x95/0x137 [xen_blkfront] ? read_reply+0x160/0x160 xenwatch_thread+0xc0/0x1a0 ? do_wait_intr_irq+0xa0/0xa0 kthread+0x16b/0x190 ? set_kthread_struct+0x40/0x40 ret_from_fork+0x22/0x30 </TASK> Modules linked in: snd_seq_dummy snd_hrtimer snd_seq snd_seq_device snd_timer snd soundcore ipt_REJECT nf_reject_ipv4 xt_state xt_conntrack nft_counter nft_chain_nat xt_MASQUERADE nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 nft_compat nf_tables nfnetlink intel_rapl_msr intel_rapl_common crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel xen_netfront pcspkr xen_scsiback target_core_mod xen_netback xen_privcmd xen_gntdev xen_gntalloc xen_blkback xen_evtchn ipmi_devintf ipmi_msghandler fuse bpf_preload ip_tables overlay xen_blkfront CR2: 0000000000000050 ---[ end trace 7bc9597fd06ae89d ]--- RIP: 0010:blk_mq_stop_hw_queues+0x5/0x40 Code: 00 48 83 e0 fd 83 c3 01 48 89 85 a8 00 00 00 41 39 5c 24 50 77 c0 5b 5d 41 5c 41 5d c3 c3 0f 1f 80 00 00 00 00 0f 1f 44 00 00 <8b> 47 50 85 c0 74 32 41 54 49 89 fc 55 53 31 db 49 8b 44 24 48 48 RSP: 0018:ffffc90000bcfe98 EFLAGS: 00010293 RAX: ffffffffc0008370 RBX: 0000000000000005 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000005 RDI: 0000000000000000 RBP: ffff88800775f000 R08: 0000000000000001 R09: ffff888006e620b8 R10: ffff888006e620b0 R11: f000000000000000 R12: ffff8880bff39000 R13: ffff8880bff39000 R14: 0000000000000000 R15: ffff88800604be00 FS: 0000000000000000(0000) GS:ffff8880f3300000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 00000000e932e002 CR4: 00000000003706e0 Kernel panic - not syncing: Fatal exception Kernel Offset: disabled info->rq and info->gd are only set in blkfront_connect(), which is called for state 4 (XenbusStateConnected). Guard against using NULL variables in blkfront_closing() to avoid the issue. The rest of blkfront_closing looks okay. If info->nr_rings is 0, then for_each_rinfo won't do anything. blkfront_remove also needs to check for non-NULL pointers before cleaning up the gendisk and request queue. Fixes: 05d69d950d9d "xen-blkfront: sanitize the removal state machine" Reported-by: Marek Marczykowski-Górecki <[email protected]> Signed-off-by: Jason Andryuk <[email protected]> Reviewed-by: Juergen Gross <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Juergen Gross <[email protected]>
2022-06-21usb: typec: wcove: Drop wrong dependency to INTEL_SOC_PMICAndy Shevchenko1-1/+0
Intel SoC PMIC is a generic name for all PMICs that are used on Intel platforms. In particular, INTEL_SOC_PMIC kernel configuration option refers to Crystal Cove PMIC, which has never been a part of any Intel Broxton hardware. Drop wrong dependency from Kconfig. Note, the correct dependency is satisfied via ACPI PMIC OpRegion driver, which the Type-C depends on. Fixes: d2061f9cc32d ("usb: typec: add driver for Intel Whiskey Cove PMIC USB Type-C PHY") Reported-by: Hans de Goede <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Reviewed-by: Heikki Krogerus <[email protected]> Reviewed-by: Hans de Goede <[email protected]> Signed-off-by: Andy Shevchenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-06-21usb: gadget: uvc: fix list double add in uvcg_video_pumpDan Vacura1-0/+3
A panic can occur if the endpoint becomes disabled and the uvcg_video_pump adds the request back to the req_free list after it has already been queued to the endpoint. The endpoint complete will add the request back to the req_free list. Invalidate the local request handle once it's been queued. <6>[ 246.796704][T13726] configfs-gadget gadget: uvc: uvc_function_set_alt(1, 0) <3>[ 246.797078][ T26] list_add double add: new=ffffff878bee5c40, prev=ffffff878bee5c40, next=ffffff878b0f0a90. <6>[ 246.797213][ T26] ------------[ cut here ]------------ <2>[ 246.797224][ T26] kernel BUG at lib/list_debug.c:31! <6>[ 246.807073][ T26] Call trace: <6>[ 246.807180][ T26] uvcg_video_pump+0x364/0x38c <6>[ 246.807366][ T26] process_one_work+0x2a4/0x544 <6>[ 246.807394][ T26] worker_thread+0x350/0x784 <6>[ 246.807442][ T26] kthread+0x2ac/0x320 Fixes: f9897ec0f6d3 ("usb: gadget: uvc: only pump video data if necessary") Cc: [email protected] Reviewed-by: Laurent Pinchart <[email protected]> Signed-off-by: Dan Vacura <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-06-21dt-bindings: usb: ehci: Increase the number of PHYsGeert Uytterhoeven1-1/+2
"make dtbs_check": arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee080100: phys: [[17, 0], [31]] is too long From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee0c0100: phys: [[17, 1], [33], [21, 0]] is too long From schema: Documentation/devicetree/bindings/usb/generic-ehci.yaml Some USB EHCI controllers (e.g. on the Renesas RZ/G1C SoC) have multiple PHYs. Increase the maximum number of PHYs to 3, which is sufficient for now. Fixes: 0499220d6dadafa5 ("dt-bindings: Add missing array size constraints") Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/c5d19e2f9714f43effd90208798fc1936098078f.1655301043.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-06-21dt-bindings: usb: ohci: Increase the number of PHYsGeert Uytterhoeven1-1/+2
"make dtbs_check": arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee080000: phys: [[17, 0], [31]] is too long From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml arch/arm/boot/dts/r8a77470-iwg23s-sbc.dtb: usb@ee0c0000: phys: [[17, 1], [33], [21, 0]] is too long From schema: Documentation/devicetree/bindings/usb/generic-ohci.yaml Some USB OHCI controllers (e.g. on the Renesas RZ/G1C SoC) have multiple PHYs. Increase the maximum number of PHYs to 3, which is sufficient for now. Fixes: 0499220d6dadafa5 ("dt-bindings: Add missing array size constraints") Signed-off-by: Geert Uytterhoeven <[email protected]> Link: https://lore.kernel.org/r/0112f9c8881513cb33bf7b66bc743dd08b35a2f5.1655301203.git.geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <[email protected]>
2022-06-21io_uring: fix req->apoll_eventsPavel Begunkov1-4/+8
apoll_events should be set once in the beginning of poll arming just as poll->events and not change after. However, currently io_uring resets it on each __io_poll_execute() for no clear reason. There is also a place in __io_arm_poll_handler() where we add EPOLLONESHOT to downgrade a multishot, but forget to do the same thing with ->apoll_events, which is buggy. Fixes: 81459350d581e ("io_uring: cache req->apoll->events in req->cflags") Signed-off-by: Pavel Begunkov <[email protected]> Reviewed-by: Hao Xu <[email protected]> Link: https://lore.kernel.org/r/0aef40399ba75b1a4d2c2e85e6e8fd93c02fc6e4.1655814213.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <[email protected]>
2022-06-21io_uring: fix merge error in checking send/recv addr2 flagsJens Axboe1-4/+0
With the dropping of the IOPOLL checking in the per-opcode handlers, we inadvertently left two checks in the recv/recvmsg and send/sendmsg prep handlers for the same thing, and one of them includes addr2 which holds the flags for these opcodes. Fix it up and kill the redundant checks. Signed-off-by: Jens Axboe <[email protected]>
2022-06-21Documentation: update btrfs list of features and link to readthedocs.ioDavid Sterba1-3/+13
The btrfs documentation in kernel is only meant as a starting point, so update the list of features and add link to btrfs.readthedocs.io page that is most up-to-date. The wiki is still used but information is migrated from there. Signed-off-by: David Sterba <[email protected]>
2022-06-21btrfs: fix deadlock with fsync+fiemap+transaction commitJosef Bacik1-15/+52
We are hitting the following deadlock in production occasionally Task 1 Task 2 Task 3 Task 4 Task 5 fsync(A) start trans start commit falloc(A) lock 5m-10m start trans wait for commit fiemap(A) lock 0-10m wait for 5m-10m (have 0-5m locked) have btrfs_need_log_full_commit !full_sync wait_ordered_extents finish_ordered_io(A) lock 0-5m DEADLOCK We have an existing dependency of file extent lock -> transaction. However in fsync if we tried to do the fast logging, but then had to fall back to committing the transaction, we will be forced to call btrfs_wait_ordered_range() to make sure all of our extents are updated. This creates a dependency of transaction -> file extent lock, because btrfs_finish_ordered_io() will need to take the file extent lock in order to run the ordered extents. Fix this by stopping the transaction if we have to do the full commit and we attempted to do the fast logging. Then attach to the transaction and commit it if we need to. CC: [email protected] # 5.15+ Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Josef Bacik <[email protected]> Signed-off-by: David Sterba <[email protected]>
2022-06-21btrfs: don't set lock_owner when locking extent buffer for readingZygo Blaxell1-3/+0
In 196d59ab9ccc "btrfs: switch extent buffer tree lock to rw_semaphore" the functions for tree read locking were rewritten, and in the process the read lock functions started setting eb->lock_owner = current->pid. Previously lock_owner was only set in tree write lock functions. Read locks are shared, so they don't have exclusive ownership of the underlying object, so setting lock_owner to any single value for a read lock makes no sense. It's mostly harmless because write locks and read locks are mutually exclusive, and none of the existing code in btrfs (btrfs_init_new_buffer and print_eb_refs_lock) cares what nonsense is written in lock_owner when no writer is holding the lock. KCSAN does care, and will complain about the data race incessantly. Remove the assignments in the read lock functions because they're useless noise. Fixes: 196d59ab9ccc ("btrfs: switch extent buffer tree lock to rw_semaphore") CC: [email protected] # 5.15+ Reviewed-by: Nikolay Borisov <[email protected]> Reviewed-by: Filipe Manana <[email protected]> Signed-off-by: Zygo Blaxell <[email protected]> Signed-off-by: David Sterba <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.