aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-10-15dt-bindings: watchdog: renesas-wdt: Document r8a7744 supportBiju Das1-0/+1
RZ/G1N (R8A7744) watchdog implementation is compatible with R-Car Gen2, therefore add relevant documentation. Signed-off-by: Biju Das <[email protected]> Reviewed-by: Chris Paterson <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-10-15dt-bindings: thermal: rcar: Add device tree support for r8a7744Biju Das1-0/+1
Add thermal sensor support for r8a7744 SoC. The Renesas RZ/G1N (r8a7744) thermal sensor module is identical to the R-Car Gen2 family. No driver change is needed due to the fallback compatible value "renesas,rcar-gen2-thermal". Signed-off-by: Biju Das <[email protected]> Reviewed-by: Chris Paterson <[email protected]> Reviewed-by: Daniel Lezcano <[email protected]> Reviewed-by: Simon Horman <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-10-12Documentation: dt: Add binding for /secure-chosen/stdout-pathJerome Forissier1-1/+18
Some platforms may use a single device tree to describe two address spaces, as described in d9f43babb998 ("Documentation: dt: Add bindings for Secure-only devices"). For these platforms it makes sense to define a secure counterpart of /chosen, namely: /secure-chosen. This new node is meant to be used by the secure firmware to pass data to the secure OS. Only the stdout-path property is supported for now. Signed-off-by: Jerome Forissier <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-10-11dt-bindings: arm: zte: Move sysctrl bindings to their own docRob Herring2-26/+31
In preparation to convert board-level bindings to json-schema, move various misc SoC bindings out to their own file. Cc: Mark Rutland <[email protected]> Cc: Jun Nie <[email protected]> Cc: Baoyou Xie <[email protected]> Cc: [email protected] Cc: [email protected] Acked-by: Shawn Guo <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-10-11dt-bindings: arm: fsl: Move DCFG and SCFG bindings to their own docsRob Herring3-39/+38
In preparation to convert board-level bindings to json-schema, move various misc SoC bindings out to their own file. Acked-by: Shawn Guo <[email protected]> Cc: Mark Rutland <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-10-11dt-bindings: arm: atmel: Move various sys registers out of SoC binding docRob Herring2-170/+171
In preparation to convert board-level bindings to json-schema, move various misc SoC bindings out to their own file. Cc: Mark Rutland <[email protected]> Cc: Nicolas Ferre <[email protected]> Cc: Alexandre Belloni <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-10-04dt-bindings: arm: alpine: Move CPU control related binding to ↵Rob Herring2-75/+31
cpu-enable-method/al,alpine-smp It is best practice to have 1 binding per file, so board level bindings should be separate for various misc SoC bindings. Move the Alpine CPU control to al,alpine-smp and we can also remove a cross reference. Cc: Tsahee Zidenberg <[email protected]> Cc: Antoine Tenart <[email protected]> Cc: Mark Rutland <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-10-04Merge branch 'all-dtbs' into dt/nextRob Herring27-195/+102
2018-10-04of: Fix property name in of_node_get_device_typeRob Herring1-1/+1
Commit 0413bedabc88 ("of: Add device_type access helper functions") added a new helper not yet used in preparation for some treewide clean up of accesses to 'device_type' properties. Unfortunately, there's an error and 'type' was used for the property name. Fix this. Fixes: 0413bedabc88 ("of: Add device_type access helper functions") Cc: Frank Rowand <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-10-04soc: Convert to using %pOFn instead of device_node.nameRob Herring7-43/+43
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Li Yang <[email protected]> Cc: David Brown <[email protected]> Cc: Jonathan Hunter <[email protected]> Cc: Santosh Shilimkar <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Acked-by: Thierry Reding <[email protected]> Acked-by: Heiko Stuebner <[email protected]> Acked-by: Qiang Zhao <[email protected]> Acked-by: Andy Gross <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-10-04firmware: Convert to using %pOFn instead of device_node.nameRob Herring1-1/+1
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Acked-by: Sudeep Holla <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-10-02microblaze: enable building all dtbsRob Herring1-0/+2
Enable the 'dtbs' target for microblaze. As microblaze only has one dts file, always enable it. Cc: Michal Simek <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-10-02c6x: enable building all dtbsRob Herring1-0/+6
Enable the 'dtbs' target for c6x. This allows building all the dts files in arch/c6x/boot/dts/ for enabled platforms or when COMPILE_TEST and OF_ALL_DTBS are enabled. Cc: Mark Salter <[email protected]> Cc: Aurelien Jacquiot <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-10-02powerpc: enable building all dtbsRob Herring2-0/+9
Enable the 'dtbs' target for powerpc. This allows building all the dts files in arch/powerpc/boot/dts/ when COMPILE_TEST and OF_ALL_DTBS are enabled. Cc: Benjamin Herrenschmidt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-10-02kbuild: consolidate Devicetree dtb build rulesRob Herring17-101/+48
There is nothing arch specific about building dtb files other than their location under /arch/*/boot/dts/. Keeping each arch aligned is a pain. The dependencies and supported targets are all slightly different. Also, a cross-compiler for each arch is needed, but really the host compiler preprocessor is perfectly fine for building dtbs. Move the build rules to a common location and remove the arch specific ones. This is done in a single step to avoid warnings about overriding rules. The build dependencies had been a mixture of 'scripts' and/or 'prepare'. These pull in several dependencies some of which need a target compiler (specifically devicetable-offsets.h) and aren't needed to build dtbs. All that is really needed is dtc, so adjust the dependencies to only be dtc. This change enables support 'dtbs_install' on some arches which were missing the target. Acked-by: Will Deacon <[email protected]> Acked-by: Paul Burton <[email protected]> Acked-by: Ley Foon Tan <[email protected]> Acked-by: Masahiro Yamada <[email protected]> Cc: Michal Marek <[email protected]> Cc: Vineet Gupta <[email protected]> Cc: Russell King <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: Michal Simek <[email protected]> Cc: Ralf Baechle <[email protected]> Cc: James Hogan <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Chris Zankel <[email protected]> Cc: Max Filippov <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-10-02c6x: use common built-in dtb supportRob Herring5-25/+3
Using the common build support for built-in dtb files just requires adding a .dtb.o target to obj-y. The dtb now needs to be copied when unflattened because an init section is used now. Cc: Mark Salter <[email protected]> Cc: Aurelien Jacquiot <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-10-02nios2: fix building all dtbsRob Herring1-0/+3
nios2 has a 'dtbs' target, but nothing is added to 'dtb-*' targets and no dtbs were getting built. This enables building all the dts files in arch/nios2/boot/dts/ when COMPILE_TEST and OF_ALL_DTBS are enabled. Cc: Ley Foon Tan <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-10-02nios2: use common rules to build built-in dtbRob Herring4-37/+4
Using the common build support for built-in dtb files just requires adding a .dtb.o target to obj-y. This has the side effect that CONFIG_NIOS2_DTB_SOURCE should now be just the dts filename in arch/nios2/boot/dts/ directory. Before any path was supported, but if you want to build in your dtb to the kernel, it should be in the kernel tree. Cc: Ley Foon Tan <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-10-02nios2: build .dtb files in dts directoryRob Herring3-6/+3
Align nios2 with other architectures which build the dtb files in the same directory as the dts files. This is also in line with most other build targets which are located in the same directory as the source. This move will help enable the 'dtbs' target which builds all the dtbs regardless of kernel config. This transition could break some scripts if they expect dtb files in the old location. Cc: Ley Foon Tan <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-10-02powerpc: build .dtb files in dts directoryRob Herring3-30/+28
Align powerpc with other architectures which build the dtb files in the same directory as the dts files. This is also in line with most other build targets which are located in the same directory as the source. This move will help enable the 'dtbs' target which builds all the dtbs regardless of kernel config. This transition could break some scripts if they expect dtb files in the old location. Cc: Benjamin Herrenschmidt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-09-28devfreq: Convert to using %pOFn instead of device_node.nameRob Herring1-2/+2
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Acked-by: Chanwoo Choi <[email protected]> Acked-by: MyungJoo Ham <[email protected]> Cc: Kyungmin Park <[email protected]> Cc: Kukjin Kim <[email protected]> Cc: Krzysztof Kozlowski <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-09-28bus: mvebu-mbus: Convert to using %pOFn instead of device_node.nameRob Herring1-1/+1
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring <[email protected]>
2018-09-28bus: fsl-mc: Convert to using %pOFn instead of device_node.nameRob Herring1-3/+3
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Stuart Yoder <[email protected]> Cc: Laurentiu Tudor <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-09-28xtensa: Convert to using %pOFn instead of device_node.nameRob Herring1-3/+3
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Chris Zankel <[email protected]> Cc: [email protected] Acked-by: Max Filippov <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-09-28nios2: Convert to using %pOFn instead of device_node.nameRob Herring1-2/+2
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Cc: Ley Foon Tan <[email protected]> Cc: [email protected] Acked-by: Ley Foon Tan <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-09-28Merge branch 'dt/cpu-type-rework' into dt/nextRob Herring23-120/+111
2018-09-28microblaze: get cpu node with of_get_cpu_nodeRob Herring1-2/+4
"device_type" use is deprecated for FDT though it has continued to be used for nodes like cpu nodes. Use of_get_cpu_node() instead which works using node names by default. This will allow the eventually removal of cpu device_type properties. Also, fix a leaked reference by adding a missing of_node_put. Cc: Michal Simek <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-09-28fbdev: fsl-diu: get cpu node with of_get_cpu_nodeRob Herring1-1/+1
"device_type" use is deprecated for FDT though it has continued to be used for nodes like cpu nodes. Use of_get_cpu_node() instead which works using node names by default. This will allow the eventually removal of cpu device_type properties. Acked-by: Timur Tabi <[email protected]> Cc: Bartlomiej Zolnierkiewicz <[email protected]> Cc: [email protected] Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-09-28of: use for_each_of_cpu_node iteratorRob Herring2-14/+3
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This has the side effect of defaulting to iterating using "cpu" node names in preference to the deprecated (for FDT) device_type == "cpu". Cc: Frank Rowand <[email protected]> Cc: [email protected] Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-09-28iommu: fsl_pamu: use for_each_of_cpu_node iteratorRob Herring1-1/+1
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This has the side effect of defaulting to iterating using "cpu" node names in preference to the deprecated (for FDT) device_type == "cpu". Cc: Joerg Roedel <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-09-28edac: cpc925: use for_each_of_cpu_node iteratorRob Herring1-18/+2
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This has the side effect of defaulting to iterating using "cpu" node names in preference to the deprecated (for FDT) device_type == "cpu". The error messages are removed in the process as it's not the driver's job to be checking cpu nodes. Any problems with cpu nodes should be noticed by the architecture code. Cc: Mauro Carvalho Chehab <[email protected]> Cc: [email protected] Acked-by: Borislav Petkov <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-09-28clk: mvebu: use for_each_of_cpu_node iteratorRob Herring1-2/+2
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This has the side effect of defaulting to iterating using "cpu" node names in preference to the deprecated (for FDT) device_type == "cpu". Cc: Michael Turquette <[email protected]> Cc: [email protected] Acked-by: Stephen Boyd <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-09-28x86: DT: use for_each_of_cpu_node iteratorRob Herring1-1/+1
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This has the side effect of defaulting to iterating using "cpu" node names in preference to the deprecated (for FDT) device_type == "cpu". Cc: Ingo Molnar <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: [email protected] Reviewed-by: Thomas Gleixner <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-09-28SH: use for_each_of_cpu_node iteratorRob Herring1-1/+1
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This has the side effect of defaulting to iterating using "cpu" node names in preference to the deprecated (for FDT) device_type == "cpu". Cc: Yoshinori Sato <[email protected]> Cc: Rich Felker <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-09-28powerpc: 8xx: get cpu node with of_get_cpu_nodeRob Herring1-2/+3
"device_type" use is deprecated for FDT though it has continued to be used for nodes like cpu nodes. Use of_get_cpu_node() instead which works using node names by default. This will allow the eventually removal of cpu device_type properties. Also, fix a leaked reference and add a missing of_node_put. Cc: Vitaly Bordug <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-09-28powerpc: 4xx: get cpu node with of_get_cpu_nodeRob Herring1-1/+1
"device_type" use is deprecated for FDT though it has continued to be used for nodes like cpu nodes. Use of_get_cpu_node() instead which works using node names by default. This will allow the eventually removal of cpu device_type properties. Cc: Benjamin Herrenschmidt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-09-28powerpc: use for_each_of_cpu_node iteratorRob Herring2-40/+26
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This has the side effect of defaulting to iterating using "cpu" node names in preference to the deprecated (for FDT) device_type == "cpu". Cc: Benjamin Herrenschmidt <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-09-28openrisc: use for_each_of_cpu_node iteratorRob Herring1-2/+1
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This has the side effect of defaulting to iterating using "cpu" node names in preference to the deprecated (for FDT) device_type == "cpu". This also fixes a leaked reference for cpus node. Cc: Jonas Bonn <[email protected]> Cc: Stefan Kristiansson <[email protected]> Cc: [email protected] Acked-by: Stafford Horne <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-09-28nios2: get cpu node with of_get_cpu_nodeRob Herring1-1/+3
"device_type" use is deprecated for FDT though it has continued to be used for nodes like cpu nodes. Use of_get_cpu_node() instead which works using node names by default. This will allow the eventually removal of cpu device_type properties. Also, fix a leaked reference by adding a missing of_node_put. Cc: Ley Foon Tan <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-09-28c6x: use for_each_of_cpu_node iteratorRob Herring1-8/+3
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This has the side effect of defaulting to iterating using "cpu" node names in preference to the deprecated (for FDT) device_type == "cpu". Cc: Mark Salter <[email protected]> Cc: Aurelien Jacquiot <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-09-28arm64: use for_each_of_cpu_node iteratorRob Herring1-1/+1
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This has the side effect of defaulting to iterating using "cpu" node names in preference to the deprecated (for FDT) device_type == "cpu". Cc: Catalin Marinas <[email protected]> Cc: [email protected] Acked-by: Will Deacon <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-09-28ARM: shmobile: use for_each_of_cpu_node iteratorRob Herring3-15/+5
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This has the side effect of defaulting to iterating using "cpu" node names in preference to the deprecated (for FDT) device_type == "cpu". Cc: Magnus Damm <[email protected]> Cc: Russell King <[email protected]> Cc: [email protected] Cc: [email protected] Reviewed-by: Geert Uytterhoeven <[email protected]> Reviewed-by: Simon Horman <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-09-28ARM: topology: remove unneeded check for /cpus nodeRob Herring1-6/+0
Checking for "/cpus" node is not necessary as of_get_cpu_node() will fail later on anyways. The call to of_find_node_by_path() also leaks a reference. So just remove the check. Cc: Russell King <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-09-28ARM: use for_each_of_cpu_node iteratorRob Herring1-4/+1
Use the for_each_of_cpu_node iterator to iterate over cpu nodes. This has the side effect of defaulting to iterating using "cpu" node names in preference to the deprecated (for FDT) device_type == "cpu". Cc: Russell King <[email protected]> Cc: [email protected] Signed-off-by: Rob Herring <[email protected]>
2018-09-28of: Support matching cpu nodes with no 'reg' propertyRob Herring1-0/+2
For some single core ARM systems, the DTs can have a single cpu node without a reg property and #address-cells == 0. This case is valid and should match on cpu #0. Cc: Frank Rowand <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-09-28of: Add cpu node iterator for_each_of_cpu_node()Rob Herring2-0/+50
Iterating thru cpu nodes is a common pattern. Create a common iterator which can find child nodes either by node name or device_type == cpu. Using the former will allow for eventually dropping device_type properties which are deprecated for FDT. Cc: Frank Rowand <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-09-27of: unittest: Disable interrupt node tests for old world MAC systemsGuenter Roeck1-8/+18
On systems with OF_IMAP_OLDWORLD_MAC set in of_irq_workarounds, the devicetree interrupt parsing code is different, causing unit tests of devicetree interrupt nodes to fail. Due to a bug in unittest code, which tries to dereference an uninitialized pointer, this results in a crash. OF: /testcase-data/phandle-tests/consumer-a: arguments longer than property Unable to handle kernel paging request for data at address 0x00bc616e Faulting instruction address: 0xc08e9468 Oops: Kernel access of bad area, sig: 11 [#1] BE PREEMPT PowerMac Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.14.72-rc1-yocto-standard+ #1 task: cf8e0000 task.stack: cf8da000 NIP: c08e9468 LR: c08ea5bc CTR: c08ea5ac REGS: cf8dbb50 TRAP: 0300 Not tainted (4.14.72-rc1-yocto-standard+) MSR: 00001032 <ME,IR,DR,RI> CR: 82004044 XER: 00000000 DAR: 00bc616e DSISR: 40000000 GPR00: c08ea5bc cf8dbc00 cf8e0000 c13ca517 c13ca517 c13ca8a0 00000066 00000002 GPR08: 00000063 00bc614e c0b05865 000affff 82004048 00000000 c00047f0 00000000 GPR16: c0a80000 c0a9cc34 c13ca517 c0ad1134 05ffffff 000affff c0b05860 c0abeef8 GPR24: cecec278 cecec278 c0a8c4d0 c0a885e0 c13ca8a0 05ffffff c13ca8a0 c13ca517 NIP [c08e9468] device_node_gen_full_name+0x30/0x15c LR [c08ea5bc] device_node_string+0x190/0x3c8 Call Trace: [cf8dbc00] [c007f670] trace_hardirqs_on_caller+0x118/0x1fc (unreliable) [cf8dbc40] [c08ea5bc] device_node_string+0x190/0x3c8 [cf8dbcb0] [c08eb794] pointer+0x25c/0x4d0 [cf8dbd00] [c08ebcbc] vsnprintf+0x2b4/0x5ec [cf8dbd60] [c08ec00c] vscnprintf+0x18/0x48 [cf8dbd70] [c008e268] vprintk_store+0x4c/0x22c [cf8dbda0] [c008ecac] vprintk_emit+0x94/0x130 [cf8dbdd0] [c008ff54] printk+0x5c/0x6c [cf8dbe10] [c0b8ddd4] of_unittest+0x2220/0x26f8 [cf8dbea0] [c0004434] do_one_initcall+0x4c/0x184 [cf8dbf00] [c0b4534c] kernel_init_freeable+0x13c/0x1d8 [cf8dbf30] [c0004814] kernel_init+0x24/0x118 [cf8dbf40] [c0013398] ret_from_kernel_thread+0x5c/0x64 The problem was observed when running a qemu test for the g3beige machine with devicetree unittests enabled. Disable interrupt node tests on affected systems to avoid both false unittest failures and the crash. With this patch in place, unittest on the affected system passes with the following message. dt-test ### end of unittest - 144 passed, 0 failed Fixes: 53a42093d96ef ("of: Add device tree selftests") Signed-off-by: Guenter Roeck <[email protected]> Reviewed-by: Frank Rowand <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-09-27ARM: dt-bindings: Add vendor prefix for FacebookVijay Khemka1-0/+1
Initial introduction of Facebook TiogaPass family equipped with Aspeed 2500 BMC SoC. TiogaPass is a x86 server development kit with a ASPEED ast2500 BMC manufactured by Facebook. This adds an entry of Facebook in Documentation for vendor prefix Signed-off-by: Vijay Khemka <[email protected]> Reviewed-by: Rob Herring <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-09-26mfd: arizona: Correct link for sound binding documentCharles Keepax1-1/+1
Signed-off-by: Charles Keepax <[email protected]> Signed-off-by: Rob Herring <[email protected]>
2018-09-26dt-bindings: i2c: Fix SMBus typosim manseop1-1/+1
Fix typo 'SMbus' to 'SMBus' Signed-off-by: sim manseop <[email protected]> Signed-off-by: Rob Herring <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.