aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2023-12-14net: mdio: mdio-bcm-unimac: Delay before first pollJustin Chen1-1/+7
With a clock interval of 400 nsec and a 64 bit transactions (32 bit preamble & 16 bit control & 16 bit data), it is reasonable to assume the mdio transaction will take 25.6 usec. Add a 30 usec delay before the first poll to reduce the chance of a 1000-2000 usec sleep. Reduce the timeout from 1000ms to 100ms as it is unlikely for the bus to take this long. Signed-off-by: Justin Chen <[email protected]> Acked-by: Florian Fainelli <[email protected]> Reviewed-by: Andrew Lunn <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-14Merge branch 'tools-ynl-gen-fill-in-the-gaps-in-support-of-legacy-families'Jakub Kicinski3-41/+158
Jakub Kicinski says: ==================== tools: ynl-gen: fill in the gaps in support of legacy families Fill in the gaps in YNL C code gen so that we can generate user space code for all genetlink families for which we have specs. The two major changes we need are support for fixed headers and support for recursive nests. For fixed header support - place the struct for the fixed header directly in the request struct (and don't bother generating access helpers). The member of a fixed header can't be too complex, and also are by definition not optional so the user has to fill them in. The YNL core needs a bit of a tweak to understand that the attrs may now start at a fixed offset, which is not necessarily equal to sizeof(struct genlmsghdr). Dealing with nested sets is much harder. Previously we'd gen the nested structs as: struct outer { struct inner inner; }; If structs are recursive (e.g. inner contains outer again) we must break this chain and allocate one of the structs dynamically (store a pointer rather than full struct). ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-14tools: ynl-gen: print prototypes for recursive stuffJakub Kicinski1-5/+39
We avoid printing forward declarations and prototypes for most types by sorting things topologically. But if structs nest we do need the forward declarations, there's no other way. Reviewed-by: Donald Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-14tools: ynl-gen: store recursive nests by a pointerJakub Kicinski1-2/+14
To avoid infinite nesting store recursive structs by pointer. If recursive struct is placed in the op directly - the first instance can be stored by value. That makes the code much less of a pain for majority of practical uses. Reviewed-by: Donald Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-14tools: ynl-gen: re-sort ignoring recursive nestsJakub Kicinski1-21/+31
We try to keep the structures and helpers "topologically sorted", to avoid forward declarations. When recursive nests are at play we need to sort twice, because structs which end up being marked as recursive will get a full set of forward declarations, so we should ignore them for the purpose of sorting. Reviewed-by: Donald Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-14tools: ynl-gen: record information about recursive nestsJakub Kicinski1-2/+17
Track which nests are recursive. Non-recursive nesting gets rendered in C as directly nested structs. For recursive ones we need to put a pointer in, rather than full struct. Track this information, no change to generated code, yet. Reviewed-by: Donald Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-14tools: ynl-gen: fill in implementations for TypeUnusedJakub Kicinski1-0/+9
Fill in more empty handlers for TypeUnused. When 'unused' attr gets specified in a nested set we have to cleanly skip it during code generation. Reviewed-by: Donald Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-14tools: ynl-gen: support fixed headers in genetlinkJakub Kicinski3-8/+45
Support genetlink families using simple fixed headers. Assume fixed header is identical for all ops of the family for now. Fixed headers are added to the request and reply structs as a _hdr member, and copied to/from netlink messages appropriately. Reviewed-by: Donald Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-14tools: ynl-gen: use enum user type for members and argsJakub Kicinski1-3/+2
Commit 30c902001534 ("tools: ynl-gen: use enum name from the spec") added pre-cooked user type for enums. Use it to fix ignoring enum-name provided in the spec. This changes a type in struct ethtool_tunnel_udp_entry but is generally inconsequential for current families. Reviewed-by: Donald Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-14tools: ynl-gen: add missing request free helpers for dumpsJakub Kicinski1-0/+1
The code gen generates a prototype for dump request free in the header, but no implementation in the source. Reviewed-by: Donald Hunter <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-14Merge branch 'bpf-fs-mount-options-parsing-follow-ups'Alexei Starovoitov2-58/+243
Andrii Nakryiko says: ==================== BPF FS mount options parsing follow ups Original BPF token patch set ([0]) added delegate_xxx mount options which supported only special "any" value and hexadecimal bitmask. This patch set attempts to make specifying and inspecting these mount options more human-friendly by supporting string constants matching corresponding bpf_cmd, bpf_map_type, bpf_prog_type, and bpf_attach_type enumerators. This implementation relies on BTF information to find all supported symbolic names. If kernel wasn't built with BTF, BPF FS will still support "any" and hex-based mask. [0] https://patchwork.kernel.org/project/netdevbpf/list/?series=805707&state=* v1->v2: - strip BPF_, BPF_MAP_TYPE_, and BPF_PROG_TYPE_ prefixes, do case-insensitive comparison, normalize to lower case (Alexei). ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-12-14selftests/bpf: utilize string values for delegate_xxx mount optionsAndrii Nakryiko1-20/+32
Use both hex-based and string-based way to specify delegate mount options for BPF FS. Acked-by: John Fastabend <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-12-14bpf: support symbolic BPF FS delegation mount optionsAndrii Nakryiko1-38/+211
Besides already supported special "any" value and hex bit mask, support string-based parsing of delegation masks based on exact enumerator names. Utilize BTF information of `enum bpf_cmd`, `enum bpf_map_type`, `enum bpf_prog_type`, and `enum bpf_attach_type` types to find supported symbolic names (ignoring __MAX_xxx guard values and stripping repetitive prefixes like BPF_ for cmd and attach types, BPF_MAP_TYPE_ for maps, and BPF_PROG_TYPE_ for prog types). The case doesn't matter, but it is normalized to lower case in mount option output. So "PROG_LOAD", "prog_load", and "MAP_create" are all valid values to specify for delegate_cmds options, "array" is among supported for map types, etc. Besides supporting string values, we also support multiple values specified at the same time, using colon (':') separator. There are corresponding changes on bpf_show_options side to use known values to print them in human-readable format, falling back to hex mask printing, if there are any unrecognized bits. This shouldn't be necessary when enum BTF information is present, but in general we should always be able to fall back to this even if kernel was built without BTF. As mentioned, emitted symbolic names are normalized to be all lower case. Example below shows various ways to specify delegate_cmds options through mount command and how mount options are printed back: 12/14 14:39:07.604 vmuser@archvm:~/local/linux/tools/testing/selftests/bpf $ mount | rg token $ sudo mkdir -p /sys/fs/bpf/token $ sudo mount -t bpf bpffs /sys/fs/bpf/token \ -o delegate_cmds=prog_load:MAP_CREATE \ -o delegate_progs=kprobe \ -o delegate_attachs=xdp $ mount | grep token bpffs on /sys/fs/bpf/token type bpf (rw,relatime,delegate_cmds=map_create:prog_load,delegate_progs=kprobe,delegate_attachs=xdp) Acked-by: John Fastabend <[email protected]> Signed-off-by: Andrii Nakryiko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-12-14Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski388-2237/+4277
Cross-merge networking fixes after downstream PR. Conflicts: drivers/net/ethernet/intel/iavf/iavf_ethtool.c 3a0b5a2929fd ("iavf: Introduce new state machines for flow director") 95260816b489 ("iavf: use iavf_schedule_aq_request() helper") https://lore.kernel.org/all/[email protected]/ drivers/net/ethernet/broadcom/bnxt/bnxt.c c13e268c0768 ("bnxt_en: Fix HWTSTAMP_FILTER_ALL packet timestamp logic") c2f8063309da ("bnxt_en: Refactor RX VLAN acceleration logic.") a7445d69809f ("bnxt_en: Add support for new RX and TPA_START completion types for P7") 1c7fd6ee2fe4 ("bnxt_en: Rename some macros for the P5 chips") https://lore.kernel.org/all/[email protected]/ drivers/net/ethernet/broadcom/bnxt/bnxt_ptp.c bd6781c18cb5 ("bnxt_en: Fix wrong return value check in bnxt_close_nic()") 84793a499578 ("bnxt_en: Skip nic close/open when configuring tstamp filters") https://lore.kernel.org/all/[email protected]/ drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c 3d7a3f2612d7 ("net/mlx5: Nack sync reset request when HotPlug is enabled") cecf44ea1a1f ("net/mlx5: Allow sync reset flow when BF MGT interface device is present") https://lore.kernel.org/all/[email protected]/ No adjacent changes. Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-14Merge branch 'add-bpf_xdp_get_xfrm_state-kfunc'Alexei Starovoitov8-155/+384
Daniel Xu says: ==================== Add bpf_xdp_get_xfrm_state() kfunc This patchset adds two kfunc helpers, bpf_xdp_get_xfrm_state() and bpf_xdp_xfrm_state_release() that wrap xfrm_state_lookup() and xfrm_state_put(). The intent is to support software RSS (via XDP) for the ongoing/upcoming ipsec pcpu work [0]. Recent experiments performed on (hopefully) reproducible AWS testbeds indicate that single tunnel pcpu ipsec can reach line rate on 100G ENA nics. Note this patchset only tests/shows generic xfrm_state access. The "secret sauce" (if you can really even call it that) involves accessing a soon-to-be-upstreamed pcpu_num field in xfrm_state. Early example is available here [1]. [0]: https://datatracker.ietf.org/doc/draft-ietf-ipsecme-multi-sa-performance/03/ [1]: https://github.com/danobi/xdp-tools/blob/e89a1c617aba3b50d990f779357d6ce2863ecb27/xdp-bench/xdp_redirect_cpumap.bpf.c#L385-L406 Changes from v5: * Improve kfunc doc comments * Remove extraneous replay-window setting on selftest reverse path * Squash two kfunc commits into one * Rebase to bpf-next to pick up bitfield write patches * Remove testing of opts.error in selftest prog Changes from v4: * Fixup commit message for selftest * Set opts->error -ENOENT for !x * Revert single file xfrm + bpf Changes from v3: * Place all xfrm bpf integrations in xfrm_bpf.c * Avoid using nval as a temporary * Rebase to bpf-next * Remove extraneous __failure_unpriv annotation for verifier tests Changes from v2: * Fix/simplify BPF_CORE_WRITE_BITFIELD() algorithm * Added verifier tests for bitfield writes * Fix state leakage across test_tunnel subtests Changes from v1: * Move xfrm tunnel tests to test_progs * Fix writing to opts->error when opts is invalid * Use __bpf_kfunc_start_defs() * Remove unused vxlanhdr definition * Add and use BPF_CORE_WRITE_BITFIELD() macro * Make series bisect clean Changes from RFCv2: * Rebased to ipsec-next * Fix netns leak Changes from RFCv1: * Add Antony's commit tags * Add KF_ACQUIRE and KF_RELEASE semantics ==================== Reviewed-by: Eyal Birger <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-12-14bpf: xfrm: Add selftest for bpf_xdp_get_xfrm_state()Daniel Xu2-2/+65
This commit extends test_tunnel selftest to test the new XDP xfrm state lookup kfunc. Co-developed-by: Antony Antony <[email protected]> Signed-off-by: Antony Antony <[email protected]> Signed-off-by: Daniel Xu <[email protected]> Link: https://lore.kernel.org/r/e704e9a4332e3eac7b458e4bfdec8fcc6984cdb6.1702593901.git.dxu@dxuuu.xyz Signed-off-by: Alexei Starovoitov <[email protected]>
2023-12-14bpf: selftests: Move xfrm tunnel test to test_progsDaniel Xu3-95/+151
test_progs is better than a shell script b/c C is a bit easier to maintain than shell. Also it's easier to use new infra like memory mapped global variables from C via bpf skeleton. Co-developed-by: Antony Antony <[email protected]> Signed-off-by: Antony Antony <[email protected]> Signed-off-by: Daniel Xu <[email protected]> Link: https://lore.kernel.org/r/a350db9e08520c64544562d88ec005a039124d9b.1702593901.git.dxu@dxuuu.xyz Signed-off-by: Alexei Starovoitov <[email protected]>
2023-12-14bpf: selftests: test_tunnel: Use vmlinux.h declarationsDaniel Xu2-55/+22
vmlinux.h declarations are more ergnomic, especially when working with kfuncs. The uapi headers are often incomplete for kfunc definitions. This commit also switches bitfield accesses to use CO-RE helpers. Switching to vmlinux.h definitions makes the verifier very unhappy with raw bitfield accesses. The error is: ; md.u.md2.dir = direction; 33: (69) r1 = *(u16 *)(r2 +11) misaligned stack access off (0x0; 0x0)+-64+11 size 2 Fix by using CO-RE-aware bitfield reads and writes. Co-developed-by: Antony Antony <[email protected]> Signed-off-by: Antony Antony <[email protected]> Signed-off-by: Daniel Xu <[email protected]> Link: https://lore.kernel.org/r/884bde1d9a351d126a3923886b945ea6b1b0776b.1702593901.git.dxu@dxuuu.xyz Signed-off-by: Alexei Starovoitov <[email protected]>
2023-12-14bpf: selftests: test_tunnel: Setup fresh topology for each subtestDaniel Xu1-5/+2
This helps with determinism b/c individual setup/teardown prevents leaking state between different subtests. Signed-off-by: Daniel Xu <[email protected]> Link: https://lore.kernel.org/r/0fb59fa16fb58cca7def5239df606005a3e8dd0e.1702593901.git.dxu@dxuuu.xyz Signed-off-by: Alexei Starovoitov <[email protected]>
2023-12-14bpf: xfrm: Add bpf_xdp_get_xfrm_state() kfuncDaniel Xu4-0/+146
This commit adds an unstable kfunc helper to access internal xfrm_state associated with an SA. This is intended to be used for the upcoming IPsec pcpu work to assign special pcpu SAs to a particular CPU. In other words: for custom software RSS. That being said, the function that this kfunc wraps is fairly generic and used for a lot of xfrm tasks. I'm sure people will find uses elsewhere over time. This commit also adds a corresponding bpf_xdp_xfrm_state_release() kfunc to release the refcnt acquired by bpf_xdp_get_xfrm_state(). The verifier will require that all acquired xfrm_state's are released. Co-developed-by: Antony Antony <[email protected]> Signed-off-by: Antony Antony <[email protected]> Acked-by: Steffen Klassert <[email protected]> Signed-off-by: Daniel Xu <[email protected]> Link: https://lore.kernel.org/r/a29699c42f5fad456b875c98dd11c6afc3ffb707.1702593901.git.dxu@dxuuu.xyz Signed-off-by: Alexei Starovoitov <[email protected]>
2023-12-14selftests/bpf: Remove flaky test_btf_id testYonghong Song1-5/+0
With previous patch, one of subtests in test_btf_id becomes flaky and may fail. The following is a failing example: Error: #26 btf Error: #26/174 btf/BTF ID Error: #26/174 btf/BTF ID btf_raw_create:PASS:check 0 nsec btf_raw_create:PASS:check 0 nsec test_btf_id:PASS:check 0 nsec ... test_btf_id:PASS:check 0 nsec test_btf_id:FAIL:check BTF lingersdo_test_get_info:FAIL:check failed: -1 The test tries to prove a btf_id not available after the map is closed. But btf_id is freed only after workqueue and a rcu grace period, compared to previous case just after a rcu grade period. Depending on system workload, workqueue could take quite some time to execute function bpf_map_free_deferred() which may cause the test failure. Instead of adding arbitrary delays, let us remove the logic to check btf_id availability after map is closed. Signed-off-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-12-14bpf: Fix a race condition between btf_put() and map_free()Yonghong Song1-1/+5
When running `./test_progs -j` in my local vm with latest kernel, I once hit a kasan error like below: [ 1887.184724] BUG: KASAN: slab-use-after-free in bpf_rb_root_free+0x1f8/0x2b0 [ 1887.185599] Read of size 4 at addr ffff888106806910 by task kworker/u12:2/2830 [ 1887.186498] [ 1887.186712] CPU: 3 PID: 2830 Comm: kworker/u12:2 Tainted: G OEL 6.7.0-rc3-00699-g90679706d486-dirty #494 [ 1887.188034] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014 [ 1887.189618] Workqueue: events_unbound bpf_map_free_deferred [ 1887.190341] Call Trace: [ 1887.190666] <TASK> [ 1887.190949] dump_stack_lvl+0xac/0xe0 [ 1887.191423] ? nf_tcp_handle_invalid+0x1b0/0x1b0 [ 1887.192019] ? panic+0x3c0/0x3c0 [ 1887.192449] print_report+0x14f/0x720 [ 1887.192930] ? preempt_count_sub+0x1c/0xd0 [ 1887.193459] ? __virt_addr_valid+0xac/0x120 [ 1887.194004] ? bpf_rb_root_free+0x1f8/0x2b0 [ 1887.194572] kasan_report+0xc3/0x100 [ 1887.195085] ? bpf_rb_root_free+0x1f8/0x2b0 [ 1887.195668] bpf_rb_root_free+0x1f8/0x2b0 [ 1887.196183] ? __bpf_obj_drop_impl+0xb0/0xb0 [ 1887.196736] ? preempt_count_sub+0x1c/0xd0 [ 1887.197270] ? preempt_count_sub+0x1c/0xd0 [ 1887.197802] ? _raw_spin_unlock+0x1f/0x40 [ 1887.198319] bpf_obj_free_fields+0x1d4/0x260 [ 1887.198883] array_map_free+0x1a3/0x260 [ 1887.199380] bpf_map_free_deferred+0x7b/0xe0 [ 1887.199943] process_scheduled_works+0x3a2/0x6c0 [ 1887.200549] worker_thread+0x633/0x890 [ 1887.201047] ? __kthread_parkme+0xd7/0xf0 [ 1887.201574] ? kthread+0x102/0x1d0 [ 1887.202020] kthread+0x1ab/0x1d0 [ 1887.202447] ? pr_cont_work+0x270/0x270 [ 1887.202954] ? kthread_blkcg+0x50/0x50 [ 1887.203444] ret_from_fork+0x34/0x50 [ 1887.203914] ? kthread_blkcg+0x50/0x50 [ 1887.204397] ret_from_fork_asm+0x11/0x20 [ 1887.204913] </TASK> [ 1887.204913] </TASK> [ 1887.205209] [ 1887.205416] Allocated by task 2197: [ 1887.205881] kasan_set_track+0x3f/0x60 [ 1887.206366] __kasan_kmalloc+0x6e/0x80 [ 1887.206856] __kmalloc+0xac/0x1a0 [ 1887.207293] btf_parse_fields+0xa15/0x1480 [ 1887.207836] btf_parse_struct_metas+0x566/0x670 [ 1887.208387] btf_new_fd+0x294/0x4d0 [ 1887.208851] __sys_bpf+0x4ba/0x600 [ 1887.209292] __x64_sys_bpf+0x41/0x50 [ 1887.209762] do_syscall_64+0x4c/0xf0 [ 1887.210222] entry_SYSCALL_64_after_hwframe+0x63/0x6b [ 1887.210868] [ 1887.211074] Freed by task 36: [ 1887.211460] kasan_set_track+0x3f/0x60 [ 1887.211951] kasan_save_free_info+0x28/0x40 [ 1887.212485] ____kasan_slab_free+0x101/0x180 [ 1887.213027] __kmem_cache_free+0xe4/0x210 [ 1887.213514] btf_free+0x5b/0x130 [ 1887.213918] rcu_core+0x638/0xcc0 [ 1887.214347] __do_softirq+0x114/0x37e The error happens at bpf_rb_root_free+0x1f8/0x2b0: 00000000000034c0 <bpf_rb_root_free>: ; { 34c0: f3 0f 1e fa endbr64 34c4: e8 00 00 00 00 callq 0x34c9 <bpf_rb_root_free+0x9> 34c9: 55 pushq %rbp 34ca: 48 89 e5 movq %rsp, %rbp ... ; if (rec && rec->refcount_off >= 0 && 36aa: 4d 85 ed testq %r13, %r13 36ad: 74 a9 je 0x3658 <bpf_rb_root_free+0x198> 36af: 49 8d 7d 10 leaq 0x10(%r13), %rdi 36b3: e8 00 00 00 00 callq 0x36b8 <bpf_rb_root_free+0x1f8> <==== kasan function 36b8: 45 8b 7d 10 movl 0x10(%r13), %r15d <==== use-after-free load 36bc: 45 85 ff testl %r15d, %r15d 36bf: 78 8c js 0x364d <bpf_rb_root_free+0x18d> So the problem is at rec->refcount_off in the above. I did some source code analysis and find the reason. CPU A CPU B bpf_map_put: ... btf_put with rcu callback ... bpf_map_free_deferred with system_unbound_wq ... ... ... ... btf_free_rcu: ... ... ... bpf_map_free_deferred: ... ... ... ---------> btf_struct_metas_free() ... | race condition ... ... ---------> map->ops->map_free() ... ... btf->struct_meta_tab = NULL In the above, map_free() corresponds to array_map_free() and eventually calling bpf_rb_root_free() which calls: ... __bpf_obj_drop_impl(obj, field->graph_root.value_rec, false); ... Here, 'value_rec' is assigned in btf_check_and_fixup_fields() with following code: meta = btf_find_struct_meta(btf, btf_id); if (!meta) return -EFAULT; rec->fields[i].graph_root.value_rec = meta->record; So basically, 'value_rec' is a pointer to the record in struct_metas_tab. And it is possible that that particular record has been freed by btf_struct_metas_free() and hence we have a kasan error here. Actually it is very hard to reproduce the failure with current bpf/bpf-next code, I only got the above error once. To increase reproducibility, I added a delay in bpf_map_free_deferred() to delay map->ops->map_free(), which significantly increased reproducibility. diff --git a/kernel/bpf/syscall.c b/kernel/bpf/syscall.c index 5e43ddd1b83f..aae5b5213e93 100644 --- a/kernel/bpf/syscall.c +++ b/kernel/bpf/syscall.c @@ -695,6 +695,7 @@ static void bpf_map_free_deferred(struct work_struct *work) struct bpf_map *map = container_of(work, struct bpf_map, work); struct btf_record *rec = map->record; + mdelay(100); security_bpf_map_free(map); bpf_map_release_memcg(map); /* implementation dependent freeing */ Hao also provided test cases ([1]) for easily reproducing the above issue. There are two ways to fix the issue, the v1 of the patch ([2]) moving btf_put() after map_free callback, and the v5 of the patch ([3]) using a kptr style fix which tries to get a btf reference during map_check_btf(). Each approach has its pro and cons. The first approach delays freeing btf while the second approach needs to acquire reference depending on context which makes logic not very elegant and may complicate things with future new data structures. Alexei suggested in [4] going back to v1 which is what this patch tries to do. Rerun './test_progs -j' with the above mdelay() hack for a couple of times and didn't observe the error for the above rb_root test cases. Running Hou's test ([1]) is also successful. [1] https://lore.kernel.org/bpf/[email protected]/ [2] v1: https://lore.kernel.org/bpf/[email protected]/ [3] v5: https://lore.kernel.org/bpf/[email protected]/ [4] v4: https://lore.kernel.org/bpf/CAADnVQJ3FiXUhZJwX_81sjZvSYYKCFB3BT6P8D59RS2Gu+0Z7g@mail.gmail.com/ Cc: Hou Tao <[email protected]> Fixes: 958cf2e273f0 ("bpf: Introduce bpf_obj_new") Signed-off-by: Yonghong Song <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Alexei Starovoitov <[email protected]>
2023-12-14Merge tag 'net-6.7-rc6' of ↵Linus Torvalds62-582/+1150
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Current release - regressions: - tcp: fix tcp_disordered_ack() vs usec TS resolution Current release - new code bugs: - dpll: sanitize possible null pointer dereference in dpll_pin_parent_pin_set() - eth: octeon_ep: initialise control mbox tasks before using APIs Previous releases - regressions: - io_uring/af_unix: disable sending io_uring over sockets - eth: mlx5e: - TC, don't offload post action rule if not supported - fix possible deadlock on mlx5e_tx_timeout_work - eth: iavf: fix iavf_shutdown to call iavf_remove instead iavf_close - eth: bnxt_en: fix skb recycling logic in bnxt_deliver_skb() - eth: ena: fix DMA syncing in XDP path when SWIOTLB is on - eth: team: fix use-after-free when an option instance allocation fails Previous releases - always broken: - neighbour: don't let neigh_forced_gc() disable preemption for long - net: prevent mss overflow in skb_segment() - ipv6: support reporting otherwise unknown prefix flags in RTM_NEWPREFIX - tcp: remove acked SYN flag from packet in the transmit queue correctly - eth: octeontx2-af: - fix a use-after-free in rvu_nix_register_reporters - fix promisc mcam entry action - eth: dwmac-loongson: make sure MDIO is initialized before use - eth: atlantic: fix double free in ring reinit logic" * tag 'net-6.7-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits) net: atlantic: fix double free in ring reinit logic appletalk: Fix Use-After-Free in atalk_ioctl net: stmmac: Handle disabled MDIO busses from devicetree net: stmmac: dwmac-qcom-ethqos: Fix drops in 10M SGMII RX dpaa2-switch: do not ask for MDB, VLAN and FDB replay dpaa2-switch: fix size of the dma_unmap net: prevent mss overflow in skb_segment() vsock/virtio: Fix unsigned integer wrap around in virtio_transport_has_space() Revert "tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set" MIPS: dts: loongson: drop incorrect dwmac fallback compatible stmmac: dwmac-loongson: drop useless check for compatible fallback stmmac: dwmac-loongson: Make sure MDIO is initialized before use tcp: disable tcp_autocorking for socket when TCP_NODELAY flag is set dpll: sanitize possible null pointer dereference in dpll_pin_parent_pin_set() net: ena: Fix XDP redirection error net: ena: Fix DMA syncing in XDP path when SWIOTLB is on net: ena: Fix xdp drops handling due to multibuf packets net: ena: Destroy correct number of xdp queues upon failure net: Remove acked SYN flag from packet in the transmit queue correctly qed: Fix a potential use-after-free in qed_cxt_tables_alloc ...
2023-12-14Merge tag 'for-6.7-rc5-tag' of ↵Linus Torvalds11-50/+116
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux Pull btrfs fixes from David Sterba: "Some fixes to quota accounting code, mostly around error handling and correctness: - free reserves on various error paths, after IO errors or transaction abort - don't clear reserved range at the folio release time, it'll be properly cleared after final write - fix integer overflow due to int used when passing around size of freed reservations - fix a regression in squota accounting that missed some cases with delayed refs" * tag 'for-6.7-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: btrfs: ensure releasing squota reserve on head refs btrfs: don't clear qgroup reserved bit in release_folio btrfs: free qgroup pertrans reserve on transaction abort btrfs: fix qgroup_free_reserved_data int overflow btrfs: free qgroup reserve when ORDERED_IOERR is set
2023-12-14ice: add documentation for FW loggingPaul M Stillwell Jr1-0/+141
Add documentation for FW logging in Documentation/networking/device_drivers/ethernet/intel/ice.rst Signed-off-by: Paul M Stillwell Jr <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2023-12-14ice: add ability to read and configure FW log dataPaul M Stillwell Jr6-0/+405
Once logging is enabled the user should read the data from the 'data' file. The data is in the form of a binary blob that can be sent to Intel for decoding. To read the data use a command like: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/data > log_data.bin If the user wants to clear the FW log data that has been stored in the driver then they can write any value to the 'data' file and that will clear the data. An example is: # echo 34 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/data In addition to being able to read the data the user can configure how much memory is used to store FW log data. This allows the user to increase/decrease the amount of memory based on the users situation. The data is stored such that if the memory fills up then the oldest data will get overwritten in a circular manner. To change the amount of memory the user can write to the 'log_size' file like this: # echo <value> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/log_size Where <value> is one of 128K, 256K, 512K, 1M, and 2M. The default value is 1M. The user can see the current value of 'log_size' by reading the file: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/log_size Signed-off-by: Paul M Stillwell Jr <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-12-14ice: enable FW loggingPaul M Stillwell Jr4-0/+170
Once users have configured the FW logging then allow them to enable it by writing to the 'fwlog/enable' file. The file accepts a boolean value (0 or 1) where 1 means enable FW logging and 0 means disable FW logging. # echo <value> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/enable Where <value> is 0 or 1. The user can read the 'fwlog/enable' file to see whether logging is enabled or not. Reading the actual data is a separate patch. To see the current value then: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/enable Signed-off-by: Paul M Stillwell Jr <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-12-14ice: configure FW loggingPaul M Stillwell Jr9-1/+796
Users want the ability to debug FW issues by retrieving the FW logs from the E8xx devices. Use debugfs to allow the user to configure the log level and number of messages for FW logging. If FW logging is supported on the E8xx then the file 'fwlog' will be created under the PCI device ID for the ice driver. If the file does not exist then either the E8xx doesn't support FW logging or debugfs is not enabled on the system. One thing users want to do is control which events are reported. The user can read and write the 'fwlog/modules/<module name>' to get/set the log levels. Each module in the FW that supports logging ht as a file under 'fwlog/modules' that supports reading (to see what the current log level is) and writing (to change the log level). The format to set the log levels for a module are: # echo <log level> > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/<module> The supported log levels are: * none * error * warning * normal * verbose Each level includes the messages from the previous/lower level The modules that are supported are: * general * ctrl * link * link_topo * dnl * i2c * sdp * mdio * adminq * hdma * lldp * dcbx * dcb * xlr * nvm * auth * vpd * iosf * parser * sw * scheduler * txq * rsvd * post * watchdog * task_dispatch * mng * synce * health * tsdrv * pfreg * mdlver * all The module 'all' is a special module which allows the user to read or write to all of the modules. The following example command would set the DCB module to the 'normal' log level: # echo normal > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb If the user wants to set the DCB, Link, and the AdminQ modules to 'verbose' then the commands are: # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/link # echo verbose > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/adminq If the user wants to set all modules to the 'warning' level then the command is: # echo warning > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all If the user wants to disable logging for a module then they can set the level to 'none'. An example setting the 'watchdog' module is: # echo none > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/watchdog If the user wants to see what the log level is for a specific module then the command is: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/dcb This will return the log level for the DCB module. If the user wants to see the log level for all the modules then the command is: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/modules/all Writing to the module file will update the configuration, but NOT enable the configuration (that is a separate command). In addition to configuring the modules, the user can also configure the number of log messages (nr_messages) to include in a single Admin Receive Queue (ARQ) event.The range is 1-128 (1 means push every log message, 128 means push only when the max AQ command buffer is full). The suggested value is 10. To see/change the resolution the user can read/write the 'fwlog/nr_messages' file. An example changing the value to 50 is # echo 50 > /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/nr_messages To see the current value of 'nr_messages' then the command is: # cat /sys/kernel/debug/ice/0000\:18\:00.0/fwlog/nr_messages Signed-off-by: Paul M Stillwell Jr <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-12-14ice: remove FW logging codePaul M Stillwell Jr5-319/+0
The FW logging code doesn't work because there is no way to set cq_ena or uart_ena so remove the code. This code is the original (v1) way of FW logging so it should be replaced with the v2 way. Signed-off-by: Paul M Stillwell Jr <[email protected]> Tested-by: Pucha Himasekhar Reddy <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2023-12-14net, xdp: Correct grammarRandy Dunlap1-2/+2
Use the correct verb form in 2 places in the XDP rx-queue comment. Signed-off-by: Randy Dunlap <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Jesper Dangaard Brouer <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-12-14selftests/xsk: Fix for SEND_RECEIVE_UNALIGNED testTushar Vyavahare1-9/+16
Fix test broken by shared umem test and framework enhancement commit. Correct the current implementation of pkt_stream_replace_half() by ensuring that nb_valid_entries are not set to half, as this is not true for all the tests. Ensure that the expected value for valid_entries for the SEND_RECEIVE_UNALIGNED test equals the total number of packets sent, which is 4096. Create a new function called pkt_stream_pkt_set() that allows for packet modification to meet specific requirements while ensuring the accurate maintenance of the valid packet count to prevent inconsistencies in packet tracking. Fixes: 6d198a89c004 ("selftests/xsk: Add a test for shared umem feature") Reported-by: Maciej Fijalkowski <[email protected]> Signed-off-by: Tushar Vyavahare <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Reviewed-by: Maciej Fijalkowski <[email protected]> Acked-by: Magnus Karlsson <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2023-12-14net: mvpp2: add support for miiStefan Eichenberger1-3/+18
Currently, mvpp2 only supports RGMII. This commit adds support for MII. The description in Marvell's functional specification seems to be wrong. To enable MII, we need to set GENCONF_CTRL0_PORT3_RGMII, while for RGMII we need to clear it. This is also how U-Boot handles it. Signed-off-by: Stefan Eichenberger <[email protected]> Reviewed-by: Maxime Chevallier <[email protected]> Reviewed-by: Marcin Wojtas <[email protected]> Reviewed-by: Russell King (Oracle) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-12-14wifi: mac80211: sta_info.c: fix sentence grammarRandy Dunlap1-2/+2
Correct run-on sentences by changing "," to ";". Signed-off-by: Randy Dunlap <[email protected]> Cc: Johannes Berg <[email protected]> Cc: Kalle Valo <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-12-14wifi: mac80211: rx.c: fix sentence grammarRandy Dunlap1-2/+2
Correct a run-on sentence by changing "," to ";". Add a subject in one sentence. Signed-off-by: Randy Dunlap <[email protected]> Cc: Johannes Berg <[email protected]> Cc: Kalle Valo <[email protected]> Cc: [email protected] Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-12-14wifi: nl80211: fix grammar & spellosRandy Dunlap1-37/+37
Correct spelling as reported by codespell. Correct run-on sentences and other grammar issues. Add hyphenation of adjectives. Correct some punctuation. Signed-off-by: Randy Dunlap <[email protected]> Cc: Johannes Berg <[email protected]> Cc: [email protected] Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-12-14wifi: cfg80211: fix spelling & punctutationRandy Dunlap1-5/+5
Correct spelling and run-on sentences. Signed-off-by: Randy Dunlap <[email protected]> Cc: Johannes Berg <[email protected]> Cc: [email protected] Cc: Kalle Valo <[email protected]> Cc: "David S. Miller" <[email protected]> Cc: Eric Dumazet <[email protected]> Cc: Jakub Kicinski <[email protected]> Cc: Paolo Abeni <[email protected]> Link: https://msgid.link/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2023-12-14net: atlantic: fix double free in ring reinit logicIgor Russkikh1-1/+4
Driver has a logic leak in ring data allocation/free, where double free may happen in aq_ring_free if system is under stress and driver init/deinit is happening. The probability is higher to get this during suspend/resume cycle. Verification was done simulating same conditions with stress -m 2000 --vm-bytes 20M --vm-hang 10 --backoff 1000 while true; do sudo ifconfig enp1s0 down; sudo ifconfig enp1s0 up; done Fixed by explicitly clearing pointers to NULL on deallocation Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code") Reported-by: Linus Torvalds <[email protected]> Closes: https://lore.kernel.org/netdev/CAHk-=wiZZi7FcvqVSUirHBjx0bBUZ4dFrMDVLc3+3HCrtq0rBA@mail.gmail.com/ Signed-off-by: Igor Russkikh <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-12-14wifi: cfg80211: sort certificates in buildJohannes Berg1-2/+2
The build can become unreproducible if the list of files found by $(wildcard ...) differs. Sort the list to avoid this. Signed-off-by: Johannes Berg <[email protected]>
2023-12-14appletalk: Fix Use-After-Free in atalk_ioctlHyunwoo Kim1-5/+4
Because atalk_ioctl() accesses sk->sk_receive_queue without holding a sk->sk_receive_queue.lock, it can cause a race with atalk_recvmsg(). A use-after-free for skb occurs with the following flow. ``` atalk_ioctl() -> skb_peek() atalk_recvmsg() -> skb_recv_datagram() -> skb_free_datagram() ``` Add sk->sk_receive_queue.lock to atalk_ioctl() to fix this issue. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Signed-off-by: Hyunwoo Kim <[email protected]> Link: https://lore.kernel.org/r/20231213041056.GA519680@v4bel-B760M-AORUS-ELITE-AX Signed-off-by: Paolo Abeni <[email protected]>
2023-12-14net: stmmac: Handle disabled MDIO busses from devicetreeAndrew Halaney1-1/+5
Many hardware configurations have the MDIO bus disabled, and are instead using some other MDIO bus to talk to the MAC's phy. of_mdiobus_register() returns -ENODEV in this case. Let's handle it gracefully instead of failing to probe the MAC. Fixes: 47dd7a540b8a ("net: add support for STMicroelectronics Ethernet controllers.") Signed-off-by: Andrew Halaney <[email protected]> Reviewed-by: Serge Semin <[email protected]> Link: https://lore.kernel.org/r/20231212-b4-stmmac-handle-mdio-enodev-v2-1-600171acf79f@redhat.com Signed-off-by: Paolo Abeni <[email protected]>
2023-12-14net: stmmac: dwmac-qcom-ethqos: Fix drops in 10M SGMII RXSneh Shah1-0/+10
In 10M SGMII mode all the packets are being dropped due to wrong Rx clock. SGMII 10MBPS mode needs RX clock divider programmed to avoid drops in Rx. Update configure SGMII function with Rx clk divider programming. Fixes: 463120c31c58 ("net: stmmac: dwmac-qcom-ethqos: add support for SGMII") Tested-by: Andrew Halaney <[email protected]> Signed-off-by: Sneh Shah <[email protected]> Reviewed-by: Bjorn Andersson <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2023-12-13Merge branch '1GbE' of ↵Jakub Kicinski3-16/+11
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-12-12 (igb, e1000e) This series contains updates to igb and e1000e drivers. Ilpo Järvinen does some cleanups to both drivers: utilizing FIELD_GET() helpers and using standard kernel defines over driver created ones. * '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue: e1000e: Use pcie_capability_read_word() for reading LNKSTA e1000e: Use PCI_EXP_LNKSTA_NLW & FIELD_GET() instead of custom defines/code igb: Use FIELD_GET() to extract Link Width ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-13Merge branch 'support-symmetric-xor-rss-hash'Jakub Kicinski79-1238/+1817
Ahmed Zaki says: ==================== Support symmetric-xor RSS hash Patches 1 and 2 modify the get/set_rxh ethtool API to take a pointer to struct of parameters instead of individual params. This will allow future changes to the uAPI-shared struct ethtool_rxfh without changing the drivers' API. Patch 3 adds the support at the Kernel level, allowing the user to set a symmetric-xor RSS hash for a netdevice via: # ethtool -X eth0 hfunc toeplitz symmetric-xor and clears the flag via: # ethtool -X eth0 hfunc toeplitz The "symmetric-xor" is set in a new "input_xfrm" field in struct ethtool_rxfh. Support for the new "symmetric-xor" flag will be later sent to the "ethtool" user-space tool. Patch 4 fixes a long standing bug with the ice hash function register values. The bug has been benign for now since only (asymmetric) Toeplitz hash (Zero) has been used. Patches 5 and 6 lay some groundwork refactoring. While the first is mainly cosmetic, the second is needed since there is no more room in the previous 64-bit RSS profile ID for the symmetric attribute introduced in the next patch. Finally, patches 7 and 8 add the symmetric-xor support for the ice (E800 PFs) and the iAVF drivers. ==================== Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-13iavf: enable symmetric-xor RSS for Toeplitz hash functionAhmed Zaki10-8/+156
Allow the user to set the symmetric Toeplitz hash function via: # ethtool -X eth0 hfunc toeplitz symmetric-xor The driver will reject any new RSS configuration if a field other than (IP src/dst and L4 src/dst ports) is requested for hashing. The symmetric RSS will not be supported on PFs not advertising the ADV RSS Offload flag (ADV_RSS_SUPPORT()), for example the E700 series (i40e). Reviewed-by: Madhu Chittim <[email protected]> Signed-off-by: Ahmed Zaki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-13ice: enable symmetric-xor RSS for Toeplitz hash functionJeff Guo14-82/+402
Allow the user to set the symmetric Toeplitz hash function via: # ethtool -X eth0 hfunc toeplitz symmetric-xor All existing RSS configurations will be converted to symmetric unless they have a non-symmetric field (other than IP src/dst and L4 src/dst ports) used for hashing. The driver will reject a new RSS configuration if such a field is requested. The hash function in the E800 NICs is set per-VSI and a specific AQ command is needed to modify the hash function. Use the AQ command to enable setting the symmetric Toeplitz RSS hash function for any VSI in the new ice_set_rss_hfunc(). When the Symmetric Toeplitz hash function is used, the hardware sets the input set of the RSS (Toeplitz) algorithm to be the XOR of the fields index by HSYMM and the fields index by the INSET registers. We use this to create a symmetric hash by setting the HSYMM registers to point to their counterparts in the INSET registers: HSYMM [src_fv] = dst_fv; HSYMM [dst_fv] = src_fv; where src_fv and dst_fv are the indexes of the protocol's src and dst fields. Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Jeff Guo <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Co-developed-by: Ahmed Zaki <[email protected]> Signed-off-by: Ahmed Zaki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-13ice: refactor the FD and RSS flow ID generationAhmed Zaki8-81/+55
The flow director and RSS blocks use separate methods to generate a unique 64 bit ID for the flow. This is not extendable, especially for the RSS that already uses all 64 bit space. Refactor the flow generation API so that the ID is generated within ice_flow_add_prof(). The FD and RSS blocks caches the generated ID for later use. Suggested-by: Dan Nowlin <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Ahmed Zaki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-13ice: refactor RSS configurationQi Zhang6-177/+246
Refactor the driver to use a communication data structure for RSS config. To do so we introduce the new ice_rss_hash_cfg struct, and then pass it as an argument to several functions. Also introduce enum ice_rss_cfg_hdr_type to specify a more granular and flexible RSS configuration: ICE_RSS_OUTER_HEADERS - take outer layer as RSS input set ICE_RSS_INNER_HEADERS - take inner layer as RSS input set ICE_RSS_INNER_HEADERS_W_OUTER_IPV4 - take inner layer as RSS input set for packet with outer IPV4 ICE_RSS_INNER_HEADERS_W_OUTER_IPV6 - take inner layer as RSS input set for packet with outer IPV6 ICE_RSS_ANY_HEADERS - try with outer first then inner (same as the behaviour without this change) Finally, move the virtchnl_rss_algorithm enum to be with the other RSS related structures in the virtchnl.h file. There should be no functional change due to this patch. Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Qi Zhang <[email protected]> Co-developed-by: Jesse Brandeburg <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Co-developed-by: Ahmed Zaki <[email protected]> Signed-off-by: Ahmed Zaki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-13ice: fix ICE_AQ_VSI_Q_OPT_RSS_* register valuesAhmed Zaki3-13/+11
Fix the values of the ICE_AQ_VSI_Q_OPT_RSS_* registers. Shifting is already done when the values are used, no need to double shift. Bug was not discovered earlier since only ICE_AQ_VSI_Q_OPT_RSS_TPLZ (Zero) is currently used. Also, rename ICE_AQ_VSI_Q_OPT_RSS_XXX to ICE_AQ_VSI_Q_OPT_RSS_HASH_XXX for consistency. Co-developed-by: Jesse Brandeburg <[email protected]> Signed-off-by: Jesse Brandeburg <[email protected]> Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Ahmed Zaki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-13net: ethtool: add support for symmetric-xor RSS hashAhmed Zaki8-6/+74
Symmetric RSS hash functions are beneficial in applications that monitor both Tx and Rx packets of the same flow (IDS, software firewalls, ..etc). Getting all traffic of the same flow on the same RX queue results in higher CPU cache efficiency. A NIC that supports "symmetric-xor" can achieve this RSS hash symmetry by XORing the source and destination fields and pass the values to the RSS hash algorithm. The user may request RSS hash symmetry for a specific algorithm, via: # ethtool -X eth0 hfunc <hash_alg> symmetric-xor or turn symmetry off (asymmetric) by: # ethtool -X eth0 hfunc <hash_alg> The specific fields for each flow type should then be specified as usual via: # ethtool -N|-U eth0 rx-flow-hash <flow_type> s|d|f|n Reviewed-by: Wojciech Drewek <[email protected]> Signed-off-by: Ahmed Zaki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2023-12-13net: ethtool: get rid of get/set_rxfh_context functionsAhmed Zaki14-300/+205
Add the RSS context parameters to struct ethtool_rxfh_param and use the get/set_rxfh to handle the RSS contexts as well. This is part 2/2 of the fix suggested in [1]: - Add a rss_context member to the argument struct and a capability like cap_link_lanes_supported to indicate whether driver supports rss contexts, then you can remove *et_rxfh_context functions, and instead call *et_rxfh() with a non-zero rss_context. Link: https://lore.kernel.org/netdev/[email protected]/ [1] CC: Jesse Brandeburg <[email protected]> CC: Tony Nguyen <[email protected]> CC: Marcin Wojtas <[email protected]> CC: Russell King <[email protected]> CC: Sunil Goutham <[email protected]> CC: Geetha sowjanya <[email protected]> CC: Subbaraya Sundeep <[email protected]> CC: hariprasad <[email protected]> CC: Saeed Mahameed <[email protected]> CC: Leon Romanovsky <[email protected]> CC: Edward Cree <[email protected]> CC: Martin Habets <[email protected]> Suggested-by: Jakub Kicinski <[email protected]> Signed-off-by: Ahmed Zaki <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.