| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The second comment at btrfs_delayed_item_reserve_metadata() refers to a
field named "index_items_size" of a delayed inode, however that field
does not exists - it existed in a previous patch version, but then it
split into the fields "curr_index_batch_size" and "index_item_leaves"
in the final patch version that was picked. So update the comment.
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs
Pull quota regression fix from Jan Kara.
* tag 'fs_for_v6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
quota: Fix slow quotaoff
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A revert of recent mount option parsing fix, this breaks mounts with
security options.
The second patch is a flexible array annotation"
* tag 'for-6.6-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: add __counted_by for struct btrfs_delayed_item and use struct_size()
Revert "btrfs: reject unknown mount options early"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull ata fixes from Damien Le Moal:
- Three fixes for the pata_parport driver to address a typo in the
code, a missing operation implementation and port reset handling in
the presence of slave devices (Ondrej)
- Fix handling of ATAPI devices reset with the fit3 protocol driver of
the pata_parport driver (Ondrej)
- A follow up fix for the recent suspend/resume corrections to avoid
attempting rescanning on resume the scsi device associated with an
ata disk when the request queue of the scsi device is still suspended
(in addition to not doing the rescan if the scsi device itself is
still suspended) (me)
* tag 'ata-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
scsi: Do not rescan devices with a suspended queue
ata: pata_parport: fit3: implement IDE command set registers
ata: pata_parport: add custom version of wait_after_reset
ata: pata_parport: implement set_devctl
ata: pata_parport: fix pata_parport_devchk
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Benjamin Tissoires:
- regression fix for i2c-hid when used on DT platforms (Johan Hovold)
- kernel crash fix on removal of the Logitech USB receiver (Hans de
Goede)
* tag 'for-linus-2023101101' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: logitech-hidpp: Fix kernel crash on receiver USB disconnect
HID: i2c-hid: fix handling of unpopulated devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk regression fix from Petr Mladek:
- Avoid unnecessary wait and try to flush messages before checking
pending ones
* tag 'printk-for-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux:
printk: flush consoles before checking progress
|
|
|
|
Prepare for the coming implementation by GCC and Clang of the __counted_by
attribute. Flexible array members annotated with __counted_by can have
their accesses bounds-checked at run-time via CONFIG_UBSAN_BOUNDS (for
array indexing) and CONFIG_FORTIFY_SOURCE (for strcpy/memcpy-family
functions).
While there, use struct_size() helper, instead of the open-coded
version, to calculate the size for the allocation of the whole
flexible structure, including of course, the flexible-array member.
This code was found with the help of Coccinelle, and audited and
fixed manually.
Reviewed-by: Kees Cook <[email protected]>
Signed-off-by: Gustavo A. R. Silva <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fix from Juergen Gross:
"A fix for the xen events driver:
Closing of an event channel in the Linux kernel can result in a
deadlock. This happens when the close is being performed in parallel
to an unrelated Xen console action and the handling of a Xen console
interrupt in an unprivileged guest.
The closing of an event channel is e.g. triggered by removal of a
paravirtual device on the other side. As this action will cause
console messages to be issued on the other side quite often, the
chance of triggering the deadlock is not negligible"
* tag 'xsa441-6.6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: replace evtchn_rwlock with RCU
|
|
Static calls invocations aren't well supported from module __init and
__exit functions. Especially the static call from cleanup_trusted() led
to a crash on x86 kernel with CONFIG_DEBUG_VIRTUAL=y.
However, the usage of static call invocations for trusted_key_init()
and trusted_key_exit() don't add any value from either a performance or
security perspective. Hence switch to use indirect function calls instead.
Note here that although it will fix the current crash report, ultimately
the static call infrastructure should be fixed to either support its
future usage from module __init and __exit functions or not.
Reported-and-tested-by: Hyeonggon Yoo <[email protected]>
Link: https://lore.kernel.org/lkml/ZRhKq6e5nF%2F4ZIV1@fedora/#t
Fixes: 5d0682be3189 ("KEYS: trusted: Add generic trusted keys framework")
Signed-off-by: Sumit Garg <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of updates for interrupt chip drivers:
- Fix the fail of the Qualcomm PDC driver on v3.2 hardware which is
caused by a control bit being moved to a different location
- Update the SM8150 device tree PDC resource so the version register
can be read
- Make the Renesas RZG2L driver correct for interrupts which are
outside of the LSB in the TSSR register by using the proper macro
for calculating the mask
- Document the Renesas RZ2GL device tree binding correctly and update
them for a few devices which faul to boot otherwise
- Use the proper accessor in the RZ2GL driver instead of blindly
dereferencing an unchecked pointer
- Make GICv3 handle the dma-non-coherent attribute correctly
- Ensure that all interrupt controller nodes on RISCV are marked as
initialized correctly
Maintainer changes:
- Add a new entry for GIC interrupt controllers and assign Marc
Zyngier as the maintainer
- Remove Marc Zyngier from the core and driver maintainer entries as
he is burried in work and short of time to handle that.
Thanks to Marc for all the great work he has done in the past couple
of years!
Also note that commit 5873d380f4c0 ("irqchip/qcom-pdc: Add support for
v3.2 HW") has a incorrect SOB chain.
The real author is Neil. His patch was posted by Dmitry once and Neil
picked it up from the list and reposted it with the bogus SOB chain.
Not a big deal, but worth to mention. I wanted to fix that up, but
then got distracted and Marc piled more changes on top. So I decided
to leave it as is instead of rebasing world"
* tag 'irq-urgent-2023-10-10-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Remove myself from the general IRQ subsystem maintenance
MAINTAINERS: Add myself as the ARM GIC maintainer
irqchip/renesas-rzg2l: Convert to irq_data_get_irq_chip_data()
irqchip/stm32-exti: add missing DT IRQ flag translation
irqchip/riscv-intc: Mark all INTC nodes as initialized
irqchip/gic-v3: Enable non-coherent redistributors/ITSes DT probing
irqchip/gic-v3-its: Split allocation from initialisation of its_node
dt-bindings: interrupt-controller: arm,gic-v3: Add dma-noncoherent property
dt-bindings: interrupt-controller: renesas,irqc: Add r8a779f0 support
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Document RZ/G2UL SoC
irqchip: renesas-rzg2l: Fix logic to clear TINT interrupt source
dt-bindings: interrupt-controller: renesas,rzg2l-irqc: Update description for '#interrupt-cells' property
arm64: dts: qcom: sm8150: extend the size of the PDC resource
irqchip/qcom-pdc: Add support for v3.2 HW
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- fixes for Hyper-V VTL code (Saurabh Sengar and Olaf Hering)
- fix hv_kvp_daemon to support keyfile based connection profile
(Shradha Gupta)
* tag 'hyperv-fixes-signed-20231009' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
hv/hv_kvp_daemon:Support for keyfile based connection profile
hyperv: reduce size of ms_hyperv_info
x86/hyperv: Add common print prefix "Hyper-V" in hv_init
x86/hyperv: Remove hv_vtl_early_init initcall
x86/hyperv: Restrict get_vtl to only VTL platforms
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fix from Herbert Xu:
"Fix a regression in dm-crypt"
* tag 'v6.6-p4' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
dm crypt: Fix reqsize in crypt_iv_eboiv_gen
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of pending fixes since a couple of weeks ago, which
became slightly bigger than usual due to my vacation.
Most of changes are about ASoC device-specific fixes while USB- and
HD-audio received quirks as usual. All fixes, including two ASoC core
changes, are reasonably small and safe to apply"
* tag 'sound-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (23 commits)
ALSA: usb-audio: Fix microphone sound on Nexigo webcam.
ALSA: hda/realtek: Change model for Intel RVP board
ALSA: usb-audio: Fix microphone sound on Opencomm2 Headset
ALSA: hda: cs35l41: Cleanup and fix double free in firmware request
ASoC: dt-bindings: fsl,micfil: Document #sound-dai-cells
ASoC: amd: yc: Fix non-functional mic on Lenovo 82YM
ASoC: tlv320adc3xxx: BUG: Correct micbias setting
ASoC: rt5682: Fix regulator enable/disable sequence
ASoC: hdmi-codec: Fix broken channel map reporting
ASoC: core: Do not call link_exit() on uninitialized rtd objects
ASoC: core: Print component name when printing log
ASoC: SOF: amd: fix for firmware reload failure after playback
ASoC: fsl-asoc-card: use integer type for fll_id and pll_id
ASoC: fsl_sai: Don't disable bitclock for i.MX8MP
dt-bindings: ASoC: rockchip: Add compatible for RK3128 spdif
ASoC: soc-generic-dmaengine-pcm: Fix function name in comment
ALSA: hda/realtek - ALC287 merge RTK codec with CS CS35L41 AMP
ASoC: simple-card: fixup asoc_simple_probe() error handling
ASoC: simple-card-utils: fixup simple_util_startup() error handling
ASoC: Intel: sof_sdw: add support for SKU 0B14
...
|
|
This reverts commit 5f521494cc73520ffac18ede0758883b9aedd018.
The patch breaks mounts with security mount options like
$ mount -o context=system_u:object_r:root_t:s0 /dev/sdX /mn
mount: /mnt: wrong fs type, bad option, bad superblock on /dev/sdX, missing codepage or helper program, ...
We cannot reject all unknown options in btrfs_parse_subvol_options() as
intended, the security options can be present at this point and it's not
possible to enumerate them in a future proof way. This means unknown
mount options are silently accepted like before when the filesystem is
mounted with either -o subvol=/path or as followup mounts of the same
device.
Reported-by: Shinichiro Kawasaki <[email protected]
Signed-off-by: David Sterba <[email protected]>
|
|
Commit ff48b37802e5 ("scsi: Do not attempt to rescan suspended devices")
modified scsi_rescan_device() to avoid attempting rescanning a suspended
device. However, the modification added a check to verify that a SCSI
device is in the running state without checking if the device request
queue (in the case of block device) is also running, thus allowing the
exectuion of internal requests. Without checking the device request
queue, commit ff48b37802e5 fix is incomplete and deadlocks on resume can
still happen. Use blk_queue_pm_only() to check if the device request
queue allows executing commands in addition to checking the SCSI device
state.
Reported-by: Petr Tesarik <[email protected]>
Fixes: ff48b37802e5 ("scsi: Do not attempt to rescan suspended devices")
Cc: [email protected]
Tested-by: Petr Tesarik <[email protected]>
Reviewed-by: Martin K. Petersen <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
fit3 protocol driver does not support accessing IDE control registers
(device control/altstatus). The DOS driver does not use these registers
either (as observed from DOSEMU trace). But the HW seems to be capable
of accessing these registers - I simply tried bit 3 and it works!
The control register is required to properly reset ATAPI devices or
they will be detected only once (after a power cycle).
Tested with EXP Computer CD-865 with MC-1285B EPP cable and
TransDisk 3000.
Signed-off-by: Ondrej Zary <[email protected]>
Reviewed-by: Sergey Shtylyov <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Some parallel adapters (e.g. EXP Computer MC-1285B EPP Cable) return
bogus values when there's no master device present. This can cause
reset to fail, preventing the lone slave device (such as EXP Computer
CD-865) from working.
Add custom version of wait_after_reset that ignores master failure when
a slave device is present. The custom version is also needed because
the generic ata_sff_wait_after_reset uses direct port I/O for slave
device detection.
Signed-off-by: Ondrej Zary <[email protected]>
Reviewed-by: Sergey Shtylyov <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Add missing ops->sff_set_devctl implementation.
Fixes: 246a1c4c6b7f ("ata: pata_parport: add driver (PARIDE replacement)")
Cc: [email protected]
Signed-off-by: Ondrej Zary <[email protected]>
Reviewed-by: Sergey Shtylyov <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
There's a 'x' missing in 0x55 in pata_parport_devchk(), causing the
detection to always fail. Fix it.
Fixes: 246a1c4c6b7f ("ata: pata_parport: add driver (PARIDE replacement)")
Cc: [email protected]
Signed-off-by: Ondrej Zary <[email protected]>
Reviewed-by: Sergey Shtylyov <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
Ifcfg config file support in NetworkManger is deprecated. This patch
provides support for the new keyfile config format for connection
profiles in NetworkManager. The patch modifies the hv_kvp_daemon code
to generate the new network configuration in keyfile
format(.ini-style format) along with a ifcfg format configuration.
The ifcfg format configuration is also retained to support easy
backward compatibility for distro vendors. These configurations are
stored in temp files which are further translated using the
hv_set_ifconfig.sh script. This script is implemented by individual
distros based on the network management commands supported.
For example, RHEL's implementation could be found here:
https://gitlab.com/redhat/centos-stream/src/hyperv-daemons/-/blob/c9s/hv_set_ifconfig.sh
Debian's implementation could be found here:
https://github.com/endlessm/linux/blob/master/debian/cloud-tools/hv_set_ifconfig
The next part of this support is to let the Distro vendors consume
these modified implementations to the new configuration format.
Tested-on: Rhel9(Hyper-V, Azure)(nm and ifcfg files verified)
Signed-off-by: Shradha Gupta <[email protected]>
Reviewed-by: Saurabh Sengar <[email protected]>
Reviewed-by: Ani Sinha <[email protected]>
Signed-off-by: Wei Liu <[email protected]>
Link: https://lore.kernel.org/r/1696847920-31125-1-git-send-email-shradhagupta@linux.microsoft.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/urgent
Pull irqchip fixes from Marc Zyngier:
- DT binding updates for Renesas r8a779f0 and rzg2l
- Let GICv3 honor the "dma-non-coherent" attribute for systems that
rely on SW guessing what the HW supports
- Fix the RISC-V INTC probing by marking all devices as initialised
at once
- Properly translate interrupt numbers from DT on stm32-exti
- Use irq_data_get_irq_chip_data() in the rzg2l driver instead of
blindly dereferencing the irq_data structure
- Add a MAINTAINERS entry for the various ARM GIC irqchip drivers
- Remove myself as the top-level irqchip/irqdomain maintainer
Link: https://lore.kernel.org/all/[email protected]
|
|
Commit 9e70a5e109a4 ("printk: Add per-console suspended state")
removed console lock usage during resume and replaced it with
the clearly defined console_list_lock and srcu mechanisms.
However, the console lock usage had an important side-effect
of flushing the consoles. After its removal, consoles were no
longer flushed before checking their progress.
Add the console_lock/console_unlock dance to the beginning
of __pr_flush() to actually flush the consoles before checking
their progress. Also add comments to clarify this additional
usage of the console lock.
Note that console_unlock() does not guarantee flushing all messages
since the commit dbdda842fe96f89 ("printk: Add console owner and waiter
logic to load balance console writes").
Reported-by: Todd Brandt <[email protected]>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217955
Fixes: 9e70a5e109a4 ("printk: Add per-console suspended state")
Co-developed-by: Petr Mladek <[email protected]>
Signed-off-by: Petr Mladek <[email protected]>
Signed-off-by: John Ogness <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In unprivileged Xen guests event handling can cause a deadlock with
Xen console handling. The evtchn_rwlock and the hvc_lock are taken in
opposite sequence in __hvc_poll() and in Xen console IRQ handling.
Normally this is no problem, as the evtchn_rwlock is taken as a reader
in both paths, but as soon as an event channel is being closed, the
lock will be taken as a writer, which will cause read_lock() to block:
CPU0 CPU1 CPU2
(IRQ handling) (__hvc_poll()) (closing event channel)
read_lock(evtchn_rwlock)
spin_lock(hvc_lock)
write_lock(evtchn_rwlock)
[blocks]
spin_lock(hvc_lock)
[blocks]
read_lock(evtchn_rwlock)
[blocks due to writer waiting,
and not in_interrupt()]
This issue can be avoided by replacing evtchn_rwlock with RCU in
xen_free_irq(). Note that RCU is used only to delay freeing of the
irq_info memory. There is no RCU based dereferencing or replacement of
pointers involved.
In order to avoid potential races between removing the irq_info
reference and handling of interrupts, set the irq_info pointer to NULL
only when freeing its memory. The IRQ itself must be freed at that
time, too, as otherwise the same IRQ number could be allocated again
before handling of the old instance would have been finished.
This is XSA-441 / CVE-2023-34324.
Fixes: 54c9de89895e ("xen/events: add a new "late EOI" evtchn framework")
Reported-by: Marek Marczykowski-Górecki <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
Reviewed-by: Julien Grall <[email protected]>
Signed-off-by: Juergen Gross <[email protected]>
|
|
I own an external usb Webcam, model NexiGo N930AF, which had low mic volume and
inconsistent sound quality. Video works as expected.
(snip)
[ +0.047857] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ +0.003406] usb 5-1: New USB device found, idVendor=1bcf, idProduct=2283, bcdDevice=12.17
[ +0.000007] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000004] usb 5-1: Product: NexiGo N930AF FHD Webcam
[ +0.000003] usb 5-1: Manufacturer: SHENZHEN AONI ELECTRONIC CO., LTD
[ +0.000004] usb 5-1: SerialNumber: 20201217011
[ +0.003900] usb 5-1: Found UVC 1.00 device NexiGo N930AF FHD Webcam (1bcf:2283)
[ +0.025726] usb 5-1: 3:1: cannot get usb sound sample rate freq at ep 0x86
[ +0.071482] usb 5-1: 3:2: cannot get usb sound sample rate freq at ep 0x86
[ +0.004679] usb 5-1: 3:3: cannot get usb sound sample rate freq at ep 0x86
[ +0.051607] usb 5-1: Warning! Unlikely big volume range (=4096), cval->res is probably wrong.
[ +0.000005] usb 5-1: [7] FU [Mic Capture Volume] ch = 1, val = 0/4096/1
Set up quirk cval->res to 16 for 256 levels,
Set GET_SAMPLE_RATE quirk flag to stop trying to get the sample rate.
Confirmed that happened anyway later due to the backoff mechanism, after 3 failures
All audio stream on device interfaces share the same values,
apart from wMaxPacketSize and tSamFreq :
(snip)
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 3
bAlternateSetting 3
bNumEndpoints 1
bInterfaceClass 1 Audio
bInterfaceSubClass 2 Streaming
bInterfaceProtocol 0
iInterface 0
AudioStreaming Interface Descriptor:
bLength 7
bDescriptorType 36
bDescriptorSubtype 1 (AS_GENERAL)
bTerminalLink 8
bDelay 1 frames
wFormatTag 0x0001 PCM
AudioStreaming Interface Descriptor:
bLength 11
bDescriptorType 36
bDescriptorSubtype 2 (FORMAT_TYPE)
bFormatType 1 (FORMAT_TYPE_I)
bNrChannels 1
bSubframeSize 2
bBitResolution 16
bSamFreqType 1 Discrete
tSamFreq[ 0] 44100
Endpoint Descriptor:
bLength 9
bDescriptorType 5
bEndpointAddress 0x86 EP 6 IN
bmAttributes 5
Transfer Type Isochronous
Synch Type Asynchronous
Usage Type Data
wMaxPacketSize 0x005c 1x 92 bytes
bInterval 4
bRefresh 0
bSynchAddress 0
AudioStreaming Endpoint Descriptor:
bLength 7
bDescriptorType 37
bDescriptorSubtype 1 (EP_GENERAL)
bmAttributes 0x01
Sampling Frequency
bLockDelayUnits 0 Undefined
wLockDelay 0x0000
(snip)
Based on the usb data about manufacturer, SPCA2281B3 is the most likely controller IC
Manufacturer does not provide link for datasheet nor detailed specs.
No way to confirm if the firmware supports any other way of getting the sample rate.
Testing patch provides consistent good sound recording quality and volume range.
(snip)
[ +0.045764] usb 5-1: new high-speed USB device number 2 using xhci_hcd
[ +0.106290] usb 5-1: New USB device found, idVendor=1bcf, idProduct=2283, bcdDevice=12.17
[ +0.000006] usb 5-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ +0.000004] usb 5-1: Product: NexiGo N930AF FHD Webcam
[ +0.000003] usb 5-1: Manufacturer: SHENZHEN AONI ELECTRONIC CO., LTD
[ +0.000004] usb 5-1: SerialNumber: 20201217011
[ +0.043700] usb 5-1: set resolution quirk: cval->res = 16
[ +0.002585] usb 5-1: Found UVC 1.00 device NexiGo N930AF FHD Webcam (1bcf:2283)
Signed-off-by: Christos Skevis <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
|
|
Pull smb server fixes from Steve French:
"Six SMB3 server fixes for various races found by RO0T Lab of Huawei:
- Fix oops when racing between oplock break ack and freeing file
- Simultaneous request fixes for parallel logoffs, and for parallel
lock requests
- Fixes for tree disconnect race, session expire race, and close/open
race"
* tag '6.6-rc4-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix race condition between tree conn lookup and disconnect
ksmbd: fix race condition from parallel smb2 lock requests
ksmbd: fix race condition from parallel smb2 logoff requests
ksmbd: fix uaf in smb20_oplock_break_ack
ksmbd: fix race condition with fp
ksmbd: fix race condition between session lookup and expire
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc scheduler fixes from Ingo Molnar:
- Two EEVDF fixes: one to fix sysctl_sched_base_slice propagation, and
to fix an avg_vruntime() corner-case.
- A cpufreq frequency scaling fix
* tag 'sched-urgent-2023-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
cpufreq: schedutil: Update next_freq when cpufreq_limits change
sched/eevdf: Fix avg_vruntime()
sched/eevdf: Also update slice on placement
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull misc x86 fixes from Ingo Molnar:
- Fix SEV-SNP guest crashes that may happen on NMIs
- Fix a potential SEV platform memory setup overflow
* tag 'x86-urgent-2023-10-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev: Change npages to unsigned long in snp_accept_memory()
x86/sev: Use the GHCB protocol when available for SNP CPUID requests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc fixes from Helge Deller:
- fix random faults in mmap'd memory on pre PA8800 processors
- fix boot crash with nr_cpus=1 on kernel command line
* tag 'parisc-for-6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Restore __ldcw_align for PA-RISC 2.0 processors
parisc: Fix crash with nr_cpus=1 option
|
|
Back in 2005, Kyle McMartin removed the 16-byte alignment for
ldcw semaphores on PA 2.0 machines (CONFIG_PA20). This broke
spinlocks on pre PA8800 processors. The main symptom was random
faults in mmap'd memory (e.g., gcc compilations, etc).
Unfortunately, the errata for this ldcw change is lost.
The issue is the 16-byte alignment required for ldcw semaphore
instructions can only be reduced to natural alignment when the
ldcw operation can be handled coherently in cache. Only PA8800
and PA8900 processors actually support doing the operation in
cache.
Aligning the spinlock dynamically adds two integer instructions
to each spinlock.
Tested on rp3440, c8000 and a500.
Signed-off-by: John David Anglin <[email protected]>
Link: https://lore.kernel.org/linux-parisc/[email protected]/T/#t
Link: https://lore.kernel.org/linux-parisc/[email protected]/
Cc: [email protected]
Signed-off-by: Helge Deller <[email protected]>
|
|
John David Anglin reported that giving "nr_cpus=1" on the command
line causes a crash, while "maxcpus=1" works.
Reported-by: John David Anglin <[email protected]>
Signed-off-by: Helge Deller <[email protected]>
Cc: [email protected] # v5.18+
|
|
Pull smb client fixes from Steve French:
- protect cifs/smb3 socket connect from BPF address overwrite
- fix case when directory leases disabled but wasting resources with
unneeded thread on each mount
* tag '6.6-rc4-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: do not start laundromat thread on nohandlecache
smb: use kernel_connect() and kernel_bind()
|
|
Pull xfs fixes from Chandan Babu:
- Prevent filesystem hang when executing fstrim operations on large and
slow storage
* tag 'xfs-6.6-fixes-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: abort fstrim if kernel is suspending
xfs: reduce AGF hold times during fstrim operations
xfs: move log discard work to xfs_discard.c
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper fixes from Mike Snitzer:
- Fix memory leak when freeing dm zoned target device
- Update dm-devel mailing list address in MAINTAINERS
* tag 'for-6.6/dm-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm:
MAINTAINERS: update the dm-devel mailing list
dm zoned: free dmz->ddev array in dmz_put_zoned_devices
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
- two Kconfig build fixes under randconfig
- pxa_camera: Fix an error handling path
- mediatek: vcodec: Fix a NULL-access pointer
- tegra-video: fix an infinite recursion regression
* tag 'media/v6.6-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
media: mediatek: vcodec: Fix encoder access NULL pointer
staging: media: tegra-video: fix infinite recursion regression
media: pci: intel: ivsc: select V4L2_FWNODE
media: ipu-bridge: Fix Kconfig dependencies
media: pxa_camera: Fix an error handling path in pxa_camera_probe()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Fix potential memory leak in of_changeset_action()
- Fix some i.MX binding warnings
- Fix typo in renesas,vin binding field-even-active property
- Fix andestech,ax45mp-cache example unit-address
- Add missing additionalProperties on RiscV CPU interrupt-controller
node
- Add missing unevaluatedProperties on media bindings
- Fix brcm,iproc-pcie binding 'msi' child node schema
- Fix MEMSIC MXC4005 compatible string
* tag 'devicetree-fixes-for-6.6-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: trivial-devices: Fix MEMSIC MXC4005 compatible string
dt-bindings: PCI: brcm,iproc-pcie: Fix 'msi' child node schema
dt-bindings: PCI: brcm,iproc-pcie: Drop common pci-bus properties
dt-bindings: PCI: brcm,iproc-pcie: Fix example indentation
media: dt-bindings: Add missing unevaluatedProperties on child node schemas
dt-bindings: bus: fsl,imx8qxp-pixel-link-msi-bus: Drop child 'reg' property
media: dt-bindings: imx7-csi: Make power-domains not required for imx8mq
dt-bindings: media: renesas,vin: Fix field-even-active spelling
dt-bindings: cache: andestech,ax45mp-cache: Fix unit address in example
of: overlay: Reorder struct fragment fields kerneldoc
dt-bindings: display: fsl,imx6-hdmi: Change to 'unevaluatedProperties: false'
dt-bindings: riscv: cpus: Add missing additionalProperties on interrupt-controller node
of: dynamic: Fix potential memory leak in of_changeset_action()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
"Another round of driver one-liners from the GPIO subsystem:
- disable pin control on MMP GPIOs in gpio-pxa
- fix the GPIO number passed to one of the pinctrl callbacks in
gpio-aspeed"
* tag 'gpio-fixes-for-v6.6-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: aspeed: fix the GPIO number passed to pinctrl_gpio_set_config()
gpio: pxa: disable pinctrl calls for MMP_GPIO
|
|
Pull rdma fixes from Jason Gunthorpe:
"This includes a fix for a significant security miss in checking the
RDMA_NLDEV_CMD_SYS_SET operation.
Summary:
- UAF in SRP
- Error unwind failure in siw connection management
- Missing error checks
- NULL/ERR_PTR confusion in erdma
- Possible string truncation in CMA configfs and mlx4
- Data ordering issue in bnxt_re
- Missing stats decrement on object destroy in bnxt_re
- Mlx5 bugs in this merge window:
* Incorrect access_flag in the new mkey cache
* Missing unlock on error in flow steering
* lockdep possible deadlock on new mkey cache destruction (Plus a
fix for this too)
- Don't leak kernel stack memory to userspace in the CM
- Missing permission validation for RDMA_NLDEV_CMD_SYS_SET"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/core: Require admin capabilities to set system parameters
RDMA/mlx5: Remove not-used cache disable flag
RDMA/cma: Initialize ib_sa_multicast structure to 0 when join
RDMA/mlx5: Fix mkey cache possible deadlock on cleanup
RDMA/mlx5: Fix NULL string error
RDMA/mlx5: Fix mutex unlocking on error flow for steering anchor creation
RDMA/mlx5: Fix assigning access flags to cache mkeys
IB/mlx4: Fix the size of a buffer in add_port_entries()
RDMA/bnxt_re: Decrement resource stats correctly
RDMA/bnxt_re: Fix the handling of control path response data
RDMA/cma: Fix truncation compilation warning in make_cma_ports
RDMA/erdma: Fix NULL pointer access in regmr_cmd
RDMA/erdma: Fix error code in erdma_create_scatter_mtt()
RDMA/uverbs: Fix typo of sizeof argument
RDMA/cxgb4: Check skb value for failure to allocate
RDMA/siw: Fix connection failure handling
RDMA/srp: Do not call scsi_done() from srp_abort()
|
|
It is pretty obvious that I haven't done much on the IRQ side
for a while, and it is unlikely that I'll have more bandwidth
for it any time soon. People keep sending me patches that
I end-up reviewing in a cursory manner, which isn't great for
anyone.
So in everyone's interest, I'm removing myself from the list
of maintainers and leave the irqchip and irqdomain subsystems
in Thomas' capable hands.
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The ARM GIC maintenance is currently covered by the blanket
IRQCHIP DRIVERS entry, which I'm about to remove myself from.
It is unlikely that anyone is mad enough to pick this up,
so I'll keep doing that for the foreseable future.
Signed-off-by: Marc Zyngier <[email protected]>
Reviewed-by: Zenghui Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Use the existing irq_data_get_irq_chip_data() helper instead of
open-coding the same operation.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Lad Prabhakar <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/8e47cc6400e5a82c854c855948d2665a3a3197e3.1695819391.git.geert+renesas@glider.be
|
|
The STM32F4/7 EXTI driver was missing the xlate callback, so IRQ trigger
flags specified in the device tree were being ignored. This was
preventing the RTC alarm interrupt from working, because it must be set
to trigger on the rising edge to function correctly.
Signed-off-by: Ben Wolsieffer <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The RISC-V INTC local interrupts are per-HART (or per-CPU) so we
create INTC IRQ domain only for the INTC node belonging to the boot
HART. This means only the boot HART INTC node will be marked as
initialized and other INTC nodes won't be marked which results
downstream interrupt controllers (such as PLIC, IMSIC and APLIC
direct-mode) not being probed due to missing device suppliers.
To address this issue, we mark all INTC node for which we don't
create IRQ domain as initialized.
Reported-by: Dmitry Dunaev <[email protected]>
Signed-off-by: Anup Patel <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Link: https://lore.kernel.org/r/[email protected]
|
|
The GIC architecture specification defines a set of registers
for redistributors and ITSes that control the sharebility and
cacheability attributes of redistributors/ITSes initiator ports
on the interconnect (GICR_[V]PROPBASER, GICR_[V]PENDBASER,
GITS_BASER<n>).
Architecturally the GIC provides a means to drive shareability
and cacheability attributes signals and related IWB/OWB/ISH barriers
but it is not mandatory for designs to wire up the corresponding
interconnect signals that control the cacheability/shareability
of transactions.
Redistributors and ITSes interconnect ports can be connected to
non-coherent interconnects that are not able to manage the
shareability/cacheability attributes; this implicitly makes
the redistributors and ITSes non-coherent observers.
So far, the GIC driver on probe executes a write to "probe" for
the redistributors and ITSes registers shareability bitfields
by writing a value (ie InnerShareable - the shareability domain the
CPUs are in) and check it back to detect whether the value sticks or
not; this hinges on a GIC programming model behaviour that predates the
current specifications, that just define shareability bits as writeable
but do not guarantee that writing certain shareability values
enable the expected behaviour for the redistributors/ITSes
memory interconnect ports.
To enable non-coherent GIC designs, introduce the "dma-noncoherent"
device tree property to allow firmware to describe redistributors and
ITSes as non-coherent observers on the memory interconnect and use the
property to force the shareability attributes to be programmed into the
redistributors and ITSes registers through the GIC quirks mechanism.
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: Robin Murphy <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Marc Zyngier <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
In order to pave the way for more fancy quirk handling without making
more of a mess of this terrible driver, split the allocation of the
ITS descriptor (its_node) from the actual probing.
This will allow firmware-specific hooks to be added between these
two points.
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
The GIC v3 specifications allow redistributors and ITSes interconnect
ports used to access memory to be wired up in a way that makes the
respective initiators/memory observers non-coherent.
Add the standard dma-noncoherent property to the GICv3 bindings to
allow firmware to describe the redistributors/ITSes components and
interconnect ports behaviour in system designs where the redistributors
and ITSes are not coherent with the CPU.
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Lorenzo Pieralisi <[email protected]>
Cc: Rob Herring <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Document support for the Interrupt Controller for External Devices
(INT-EX) in the Renesas R-Car S4-8 (R8A779F0) SoC.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Reviewed-by: Kieran Bingham <[email protected]>
Reviewed-by: Yoshihiro Shimoda <[email protected]>
Acked-by: Conor Dooley <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/9467a1c67d5d240211f88336973fa968d39cc860.1690446928.git.geert+renesas@glider.be
|
|
Document RZ/G2UL (R9A07G043U) IRQC bindings. The IRQC block on RZ/G2UL SoC
is almost identical to one found on the RZ/G2L SoC the only difference
being it can support BUS_ERR_INT for which it has additional registers.
Hence new generic compatible string "renesas,r9a07g043u-irqc" is added
for RZ/G2UL SoC.
Now that we have additional interrupt for RZ/G2UL and RZ/Five SoC
interrupt-names property is added so that we can parse them based on
names.
While at it updated the example node to four spaces and added
interrupt-names property.
Signed-off-by: Lad Prabhakar <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
[email protected] has migrated to [email protected]
Signed-off-by: Mike Snitzer <[email protected]>
|