aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-08-08ALSA: vxpocket: Fix a typo at conversion to dev_*()Takashi Iwai1-1/+1
There was a typo in the previous conversion to dev_*() that caused a build error. Fix it. Fixes: 2acbb5e57230 ("ALSA: vxpocket: Use standard print API") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202408090110.t0mWbTyh-lkp@intel.com/ Link: https://patch.msgid.link/20240808182308.28418-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-08-08ALSA: snd-usb-caiaq: use snd_pcm_rate_to_rate_bitJerome Brunet1-12/+1
Use snd_pcm_rate_to_rate_bit() helper provided by Alsa instead re-implementing it. This reduce code duplication and helps when changing some Alsa definition is necessary. Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://patch.msgid.link/20240808134857.86749-1-jbrunet@baylibre.com Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-08-08ALSA: control: Fix power_ref lock order for compat code, tooTakashi Iwai1-8/+37
In the previous change for swapping the power_ref and controls_rwsem lock order, the code path for the compat layer was forgotten. This patch covers the remaining code. Fixes: fcc62b19104a ("ALSA: control: Take power_ref lock primarily") Link: https://patch.msgid.link/20240808163128.20383-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-08-08ALSA: vxpocket: Drop no longer existent chip->dev assignmentTakashi Iwai1-2/+0
The recent cleanup change for vx_core overlooked the code in vxpocket pcmcia driver. Kill the superfluous line as well. Fixes: b426b3ba9f6f ("ALSA: vx_core: Drop unused dev field") Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202408090016.kW0TA6fc-lkp@intel.com/ Link: https://patch.msgid.link/20240808162902.20082-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-08-08ALSA: usb-audio: Check shutdown at endpoint_set_interface()Takashi Iwai1-0/+3
The call of usb_set_interface() and a delay are superfluous when the device has been already disconnected. Add a disconnection check before doing it. Link: https://patch.msgid.link/20240808091522.31415-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-08-08ALSA: hdsp: Break infinite MIDI input flush loopTakashi Iwai2-4/+8
The current MIDI input flush on HDSP and HDSPM drivers relies on the hardware reporting the right value. If the hardware doesn't give the proper value but returns -1, it may be stuck at an infinite loop. Add a counter and break if the loop is unexpectedly too long. Link: https://patch.msgid.link/20240808091513.31380-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-08-08ALSA: asihpi: Fix potential OOB array accessTakashi Iwai1-1/+1
ASIHPI driver stores some values in the static array upon a response from the driver, and its index depends on the firmware. We shouldn't trust it blindly. This patch adds a sanity check of the array index to fit in the array size. Link: https://patch.msgid.link/20240808091454.30846-1-tiwai@suse.de Signed-off-by: Takashi Iwai <tiwai@suse.de>
2024-08-08ALSA: core: Drop snd_print stuff and coTakashi Iwai3-147/+0
Now that all users of snd_print*() are gone, let's drop the functions completely. This also makes CONFIG_SND_VERBOSE_PRINTK redundant, and it's dropped, too. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-55-tiwai@suse.de
2024-08-08ALSA: docs: Drop snd_print*() stuffTakashi Iwai2-31/+0
The legacy snd_print*() helpers will be dropped now. Clean up the corresponding documentation, too. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-54-tiwai@suse.de
2024-08-08ALSA: asihpi: Use standard print APITakashi Iwai2-59/+44
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. The debug prints with a special macro snd_printddd() are replaced with the conditional pr_debug(). Unfortunately dev_dbg() can't be applied well due to the lack of the reference to the device pointer. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-53-tiwai@suse.de
2024-08-08ALSA: sparc: Use standard print APITakashi Iwai2-37/+49
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-52-tiwai@suse.de
2024-08-08ALSA: sh: Use standard print APITakashi Iwai2-8/+7
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-51-tiwai@suse.de
2024-08-08ALSA: ppc: Use standard print APITakashi Iwai6-45/+41
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-50-tiwai@suse.de
2024-08-08ALSA: pdaudiocf: Use standard print APITakashi Iwai3-36/+24
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-49-tiwai@suse.de
2024-08-08ALSA: vxpocket: Use standard print APITakashi Iwai2-21/+14
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-48-tiwai@suse.de
2024-08-08ALSA: intel8x0: Drop unused snd_printd() callsTakashi Iwai2-6/+0
There are commented out debug prints, which are utterly superfluous. Let's drop them. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-47-tiwai@suse.de
2024-08-08ALSA: usb-audio: Use standard print APITakashi Iwai1-3/+3
Use pr_*() instead of open-coded printk() for code simplicity. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-46-tiwai@suse.de
2024-08-08ALSA: usx2y: Use standard print APITakashi Iwai7-150/+141
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Some superfluous debug prints are dropped, and some ambiguous messages are slightly rephrased. The sk.dev pointer is set properly for allowing to call dev_*() functions, too. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-45-tiwai@suse.de
2024-08-08ALSA: emux: Use standard print APITakashi Iwai6-52/+63
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Some functions are changed to receive snd_card object for calling dev_*() functions, too. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-44-tiwai@suse.de
2024-08-08ALSA: trident: Use standard print APITakashi Iwai1-5/+5
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-43-tiwai@suse.de
2024-08-08ALSA: emu10k1: Use dev_warn()Takashi Iwai1-2/+3
Replace an open-coded printk warning with dev_warn() for code simplicity and consistency. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-42-tiwai@suse.de
2024-08-08ALSA: azt3328: Use pr_warn()Takashi Iwai1-1/+1
Replace with the standard print API from the home-baked one. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-41-tiwai@suse.de
2024-08-08ALSA: lx6464es: Cleanup the print API usagesTakashi Iwai2-7/+4
Use pr_debug() instead of open-coded printk(). Also drop a few snd_printdd() calls that can be better done via ftrace. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-40-tiwai@suse.de
2024-08-08ALSA: korg1212: Use standard print APITakashi Iwai1-14/+16
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-39-tiwai@suse.de
2024-08-08ALSA: riptide: Use standard print APITakashi Iwai1-95/+98
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. The device pointer is stored in struct cmdif for calling dev_*() functions. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-38-tiwai@suse.de
2024-08-08ALSA: wss: Use standard print APITakashi Iwai1-88/+90
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-37-tiwai@suse.de
2024-08-08ALSA: wavefront: Use standard print APITakashi Iwai5-154/+158
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-36-tiwai@suse.de
2024-08-08ALSA: sscape: Use standard print APITakashi Iwai1-48/+48
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. The device pointer is stored in struct soundscape for calling dev_*(). Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-35-tiwai@suse.de
2024-08-08ALSA: sc6000: Use standard print APITakashi Iwai1-87/+90
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Some functions are changed to receive a device pointer to be passed to dev_*() calls. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-34-tiwai@suse.de
2024-08-08ALSA: pcm: oss: Use pr_debug()Takashi Iwai1-1/+1
Use the standard print API instead of open-coded printk(). Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-33-tiwai@suse.de
2024-08-08ALSA: control_led: Use dev_err()Takashi Iwai1-1/+1
Use the standard print API instead of open-coded printk(). Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-32-tiwai@suse.de
2024-08-08ALSA: sb: Use standard print APITakashi Iwai10-94/+105
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Some functions are changed to receive snd_card pointer for referring to the device pointer for dev_*() calls, too. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-31-tiwai@suse.de
2024-08-08ALSA: opti9xx: Use standard print APITakashi Iwai3-107/+119
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. The card pointer is stored in struct snd_opti9xx and snd_miro to be referred for dev_*() calls. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-30-tiwai@suse.de
2024-08-08ALSA: opl3sa2: Use standard print APITakashi Iwai1-24/+22
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. The card pointer is stored in struct snd_opl3sa2 to be referred for dev_*() calls. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-29-tiwai@suse.de
2024-08-08ALSA: msnd: Use standard print APITakashi Iwai3-122/+112
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-28-tiwai@suse.de
2024-08-08ALSA: gus: Use standard print APITakashi Iwai13-179/+267
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Some commented-out debug prints and dead code are dropped as well. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-27-tiwai@suse.de
2024-08-08ALSA: es18xx: Use standard print APITakashi Iwai1-41/+46
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. For referring to the device, introduce snd_card pointer to struct snd_es18xx. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-26-tiwai@suse.de
2024-08-08ALSA: es1688: Use standard print APITakashi Iwai3-27/+31
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. For referring to the device, introduce snd_card pointer to struct snd_es1688. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-25-tiwai@suse.de
2024-08-08ALSA: cs4236: Use standard print APITakashi Iwai2-42/+45
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-24-tiwai@suse.de
2024-08-08ALSA: cmi8330: Use standard print APITakashi Iwai1-19/+17
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-23-tiwai@suse.de
2024-08-08ALSA: cmi8328: Use standard print APITakashi Iwai1-21/+21
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-22-tiwai@suse.de
2024-08-08ALSA: azt2320: Use standard print APITakashi Iwai1-8/+6
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-21-tiwai@suse.de
2024-08-08ALSA: als100: Use standard print APITakashi Iwai1-9/+7
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Use the standard print API instead of open-coded printk(). Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-20-tiwai@suse.de
2024-08-08ALSA: ad1816a: Use standard print APITakashi Iwai2-16/+16
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-19-tiwai@suse.de
2024-08-08ALSA: i2c: Drop commented old debug printsTakashi Iwai5-32/+0
There are quite a few commented-out debug prints that have never been used in the production code. Let's rip them off for code cleanness. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-18-tiwai@suse.de
2024-08-08ALSA: i2c: pt2258: Use standard print APITakashi Iwai1-3/+3
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-17-tiwai@suse.de
2024-08-08ALSA: i2c: cs8427: Use standard print APITakashi Iwai1-17/+20
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-16-tiwai@suse.de
2024-08-08ALSA: pcsp: Use standard print APITakashi Iwai3-30/+31
Use the standard print API with dev_*() instead of the old house-baked one. It gives better information and allows dynamically control of debug prints. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-15-tiwai@suse.de
2024-08-08ALSA: dummy: Use standard print APITakashi Iwai1-3/+2
Use pr_*() macro instead of open-coded printk() just for code simplification. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-14-tiwai@suse.de
2024-08-08ALSA: aloop: Use standard print APITakashi Iwai1-1/+1
Use pr_err() instead of open-coded printk() just for code simplification. Reviewed-by: Jaroslav Kysela <perex@perex.cz> Signed-off-by: Takashi Iwai <tiwai@suse.de> Link: https://patch.msgid.link/20240807133452.9424-13-tiwai@suse.de
Powered by cgit, Gruvboxed by Blaster4385.