aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2019-11-22ice: fix stack leakageJesse Brandeburg1-2/+1
In the case of an invalid virtchannel request the driver would return uninitialized data to the VF from the PF stack which is a bug. Fix by initializing the stack variable earlier in the function before any return paths can be taken. Fixes: 1071a8358a28 ("ice: Implement virtchnl commands for AVF support") Signed-off-by: Jesse Brandeburg <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22ice: Don't modify stripping for add/del VLANs on VFBrett Creeley1-8/+31
Currently when adding/deleting vlans in ice_vc_process_vlan_msg() we are calling ice_vsi_manage_vlan_stripping() to enable/disable when adding and deleting a VLAN respectively. This is wrong because adding/deleting VLANs has nothing to do with configuring VLAN stripping. VLAN stripping is configured through the following VIRTCHNL operations: VIRTCHNL_OP_ENABLE_VLAN_STRIPPING VIRTCHNL_OP_DISABLE_VLAN_STRIPPING Unfortunately we can't just remove this because then stripping will never be configured on VF initialization. Fix this by adding a new function that initializes (disables/enables) VLAN stripping for the VF based on the device supported capabilities. This allows us to remove the call to ice_vsi_manage_vlan_stripping() in ice_vc_process_vlan_msg(). Signed-off-by: Brett Creeley <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22ice: Disallow VF VLAN opcodes if VLAN offloads disabledBrett Creeley1-0/+29
Currently if the host disables VLAN offloads on the VF by not setting the VIRTCHNL_VF_OFFLOAD_VLAN capability bit we will still honor VF VLAN configuration messages over VIRTCHNL. These messages (i.e. enable/disable VLAN stripping and VLAN filtering) should be blocked when the feature is not supported. Fix that by adding a helper function to determine if the VF is allowed to do VLAN operations based on the host's VF configuration. Also, mirror the VF communicated capabilities in the host's VF configuration. Signed-off-by: Brett Creeley <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22ice: Correct capabilities reporting of max TCsBruce Allan1-0/+12
Firmware always returns 8 as the max number of supported TCs. However on devices with more than 4 ports, the maximum number of TCs per port is limited to 4. Check and, if necessary, correct the reporting of capabilities for devices with more than 4 ports. Signed-off-by: Bruce Allan <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22ice: Store number of functions for the deviceBruce Allan2-11/+11
Store the number of functions the device has and use this number when setting safe mode capabilities instead of calculating it. Signed-off-by: Bruce Allan <[email protected]> Co-developed-by: Kevin Scott <[email protected]> Signed-off-by: Kevin Scott <[email protected]> Signed-off-by: Tony Nguyen <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Jeff Kirsher <[email protected]>
2019-11-22net: dsa: ocelot: fix "should it be static?" warningsChen Wandun1-2/+2
Fix following sparse warnings: drivers/net/dsa/ocelot/felix.c:351:6: warning: symbol 'felix_txtstamp' was not declared. Should it be static? Signed-off-by: Chen Wandun <[email protected]> Reviewed-by: Vivien Didelot <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-22r8152: avoid to call napi_disable twiceHayes Wang1-8/+20
Call napi_disable() twice would cause dead lock. There are three situations may result in the issue. 1. rtl8152_pre_reset() and set_carrier() are run at the same time. 2. Call rtl8152_set_tunable() after rtl8152_close(). 3. Call rtl8152_set_ringparam() after rtl8152_close(). For #1, use the same solution as commit 84811412464d ("r8152: Re-order napi_disable in rtl8152_close"). For #2 and #3, add checking the flag of IFF_UP and using napi_disable/napi_enable during mutex. Signed-off-by: Hayes Wang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-22Merge branch 'akpm' (patches from Andrew)Linus Torvalds3-33/+53
Merge misc fixes from Andrew Morton: "Three fixes" * emailed patches from Andrew Morton <[email protected]>: mm/ksm.c: don't WARN if page is still mapped in remove_stable_node() mm/memory_hotplug: don't access uninitialized memmaps in shrink_zone_span() Revert "fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()"
2019-11-22seg6: allow local packet processing for SRv6 End.DT6 behaviorAndrea Mayer1-4/+18
End.DT6 behavior makes use of seg6_lookup_nexthop() function which drops all packets that are destined to be locally processed. However, DT* should be able to deliver decapsulated packets that are destined to local addresses. Function seg6_lookup_nexthop() is also used by DX6, so in order to maintain compatibility I created another routing helper function which is called seg6_lookup_any_nexthop(). This function is able to take into account both packets that have to be processed locally and the ones that are destined to be forwarded directly to another machine. Hence, seg6_lookup_any_nexthop() is used in DT6 rather than seg6_lookup_nexthop() to allow local delivery. Signed-off-by: Andrea Mayer <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-22net: flow_dissector: Wrap unionized VLAN fields in a structPetr Machata1-3/+5
In commit a82055af5959 ("netfilter: nft_payload: add VLAN offload support"), VLAN fields in struct flow_dissector_key_vlan were unionized with the intention of introducing another field that covered the whole TCI header. However without a wrapping struct the subfields end up sharing the same bits. As a result, "tc filter add ... flower vlan_id 14" specifies not only vlan_id, but also vlan_priority. Fix by wrapping the individual VLAN fields in a struct. Fixes: a82055af5959 ("netfilter: nft_payload: add VLAN offload support") Signed-off-by: Petr Machata <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-22Merge tag 'linux-can-fixes-for-5.4-20191122' of ↵David S. Miller1-3/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2019-11-22 this is a pull request of 2 patches for net/master, if possible for the current release cycle. Otherwise these patches should hit v5.4 via the stable tree. Both patches of this pull request target the m_can driver. Pankaj Sharma fixes the fallout in the m_can_platform part, which appeared with the introduction of the m_can platform framework. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-11-22Merge tag 'mac80211-next-for-net-next-2019-11-22' of ↵David S. Miller13-26/+966
git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next Johannes Berg says: ==================== The interesting new thing here is AQL, the Airtime Queue Limit patchset from Kan Yan (Google) and Toke Høiland-Jørgensen (Redhat). The effect is intended to eventually be similar to BQL, but byte queue limits are not useful in wifi where the actual throughput can vary by around 4 orders of magnitude. There are more details in the patches themselves. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-11-22MAINTAINERS: Add myself as maintainer of virtio-vsockStefano Garzarella1-0/+1
Since I'm actively working on vsock and virtio/vhost transports, Stefan suggested to help him to maintain it. Signed-off-by: Stefano Garzarella <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-22tipc: support in-order name publication eventsTuong Lien2-8/+47
It is observed that TIPC service binding order will not be kept in the publication event report to user if the service is subscribed after the bindings. For example, services are bound by application in the following order: Server: bound port A to {18888,66,66} scope 2 Server: bound port A to {18888,33,33} scope 2 Now, if a client subscribes to the service range (e.g. {18888, 0-100}), it will get the 'TIPC_PUBLISHED' events in that binding order only when the subscription is started before the bindings. Otherwise, if started after the bindings, the events will arrive in the opposite order: Client: received event for published {18888,33,33} Client: received event for published {18888,66,66} For the latter case, it is clear that the bindings have existed in the name table already, so when reported, the events' order will follow the order of the rbtree binding nodes (- a node with lesser 'lower'/'upper' range value will be first). This is correct as we provide the tracking on a specific service status (available or not), not the relationship between multiple services. However, some users expect to see the same order of arriving events irrespective of when the subscription is issued. This turns out to be easy to fix. We now add functionality to ensure that publication events always are issued in the same temporal order as the corresponding bindings were performed. v2: replace the unnecessary macro - 'publication_after()' with inline function. v3: reuse 'time_after32()' instead of reinventing the same exact code. Acked-by: Jon Maloy <[email protected]> Signed-off-by: Tuong Lien <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-22tipc: update replicast capability for broadcast send linkHoang Le4-5/+11
When setting up a cluster with non-replicast/replicast capability supported. This capability will be disabled for broadcast send link in order to be backwards compatible. However, when these non-support nodes left and be removed out the cluster. We don't update this capability on broadcast send link. Then, some of features that based on this capability will also disabling as unexpected. In this commit, we make sure the broadcast send link capabilities will be re-calculated as soon as a node removed/rejoined a cluster. Acked-by: Jon Maloy <[email protected]> Signed-off-by: Hoang Le <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-22udp: drop skb extensions before marking skb statelessFlorian Westphal2-5/+28
Once udp stack has set the UDP_SKB_IS_STATELESS flag, later skb free assumes all skb head state has been dropped already. This will leak the extension memory in case the skb has extensions other than the ipsec secpath, e.g. bridge nf data. To fix this, set the UDP_SKB_IS_STATELESS flag only if we don't have extensions or if the extension space can be free'd. Fixes: 895b5c9f206eb7d25dc1360a ("netfilter: drop bridge nf reset from nf_reset") Cc: Paolo Abeni <[email protected]> Reported-by: Byron Stanoszek <[email protected]> Signed-off-by: Florian Westphal <[email protected]> Acked-by: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-22net: rtnetlink: prevent underflows in do_setvfinfo()Dan Carpenter1-1/+22
The "ivm->vf" variable is a u32, but the problem is that a number of drivers cast it to an int and then forget to check for negatives. An example of this is in the cxgb4 driver. drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c 2890 static int cxgb4_mgmt_get_vf_config(struct net_device *dev, 2891 int vf, struct ifla_vf_info *ivi) ^^^^^^ 2892 { 2893 struct port_info *pi = netdev_priv(dev); 2894 struct adapter *adap = pi->adapter; 2895 struct vf_info *vfinfo; 2896 2897 if (vf >= adap->num_vfs) ^^^^^^^^^^^^^^^^^^^ 2898 return -EINVAL; 2899 vfinfo = &adap->vfinfo[vf]; ^^^^^^^^^^^^^^^^^^^^^^^^^^ There are 48 functions affected. drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_main.c:8435 hclge_set_vf_vlan_filter() warn: can 'vfid' underflow 's32min-2147483646' drivers/net/ethernet/freescale/enetc/enetc_pf.c:377 enetc_pf_set_vf_mac() warn: can 'vf' underflow 's32min-2147483646' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2899 cxgb4_mgmt_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:2960 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3019 cxgb4_mgmt_set_vf_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3038 cxgb4_mgmt_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb4/cxgb4_main.c:3086 cxgb4_mgmt_set_vf_link_state() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/chelsio/cxgb/cxgb2.c:791 get_eeprom() warn: can 'i' underflow 's32min-(-4),0,4-s32max' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:82 bnxt_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:164 bnxt_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:186 bnxt_get_vf_config() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:228 bnxt_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:264 bnxt_set_vf_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:293 bnxt_set_vf_bw() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnxt/bnxt_sriov.c:333 bnxt_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_sriov.c:2595 bnx2x_vf_op_prep() warn: can 'vfidx' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2281 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2285 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2286 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2292 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/broadcom/bnx2x/bnx2x_vfpf.c:2297 bnx2x_post_vf_bulletin() warn: can 'vf' underflow 's32min-63' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1832 qlcnic_sriov_set_vf_mac() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1864 qlcnic_sriov_set_vf_tx_rate() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:1937 qlcnic_sriov_set_vf_vlan() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2005 qlcnic_sriov_get_vf_config() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/qlogic/qlcnic/qlcnic_sriov_pf.c:2036 qlcnic_sriov_set_vf_spoofchk() warn: can 'vf' underflow 's32min-254' drivers/net/ethernet/emulex/benet/be_main.c:1914 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1915 be_get_vf_config() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1922 be_set_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:1951 be_clear_vf_tvt() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2063 be_set_vf_tx_rate() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/emulex/benet/be_main.c:2091 be_set_vf_link_state() warn: can 'vf' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:2609 ice_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3050 ice_get_vf_cfg() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3103 ice_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3181 ice_set_vf_mac() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3237 ice_set_vf_trust() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/ice/ice_virtchnl_pf.c:3286 ice_set_vf_link_state() warn: can 'vf_id' underflow 's32min-65534' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3919 i40e_validate_vf() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:3957 i40e_ndo_set_vf_mac() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4104 i40e_ndo_set_vf_port_vlan() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4263 i40e_ndo_set_vf_bw() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4309 i40e_ndo_get_vf_config() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4371 i40e_ndo_set_vf_link_state() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4441 i40e_ndo_set_vf_spoofchk() warn: can 'vf_id' underflow 's32min-2147483646' drivers/net/ethernet/intel/i40e/i40e_virtchnl_pf.c:4504 i40e_ndo_set_vf_trust() warn: can 'vf_id' underflow 's32min-2147483646' Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-22Merge tag 'pm-5.4-final' of ↵Linus Torvalds1-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management regression fix from Rafael Wysocki: "Fix problems with switching cpufreq drivers on some x86 systems with ACPI (and with changing the operation modes of the intel_pstate driver on those systems) introduced by recent changes related to the management of frequency limits in cpufreq" * tag 'pm-5.4-final' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: PM: QoS: Invalidate frequency QoS requests after removal
2019-11-22Merge tag 'drm-fixes-2019-11-22' of git://anongit.freedesktop.org/drm/drmLinus Torvalds16-32/+183
Pull drm fixes from Dave Airlie: "Two sets of fixes in here, one for amdgpu, and one for i915. The amdgpu ones are pretty small, i915's CI system seems to have a few problems in the last week or so, there is one major regression fix for fb_mmap, but there are a bunch of other issues fixed in there as well, oops, screen flashes and rcu related. amdgpu: - Remove experimental flag for navi14 - Fix confusing power message failures on older VI parts - Hang fix for gfxoff when using the read register interface - Two stability regression fixes for Raven i915: - Fix kernel oops on dumb_create ioctl on no crtc situation - Fix bad ugly colored flash on VLV/CHV related to gamma LUT update - Fix unity of the frequencies reported on PMU - Fix kernel oops on set_page_dirty using better locks around it - Protect the request pointer with RCU to prevent it being freed while we might need still - Make pool objects read-only - Restore physical addresses for fb_map to avoid corrupted page table" * tag 'drm-fixes-2019-11-22' of git://anongit.freedesktop.org/drm/drm: drm/i915/fbdev: Restore physical addresses for fb_mmap() Revert "drm/amd/display: enable S/G for RAVEN chip" drm/amdgpu: disable gfxoff on original raven drm/amdgpu: disable gfxoff when using register read interface drm/amd/powerplay: correct fine grained dpm force level setting drm/amd/powerplay: issue no PPSMC_MSG_GetCurrPkgPwr on unsupported ASICs drm/amdgpu: remove experimental flag for Navi14 drm/i915: make pool objects read-only drm/i915: Protect request peeking with RCU drm/i915/userptr: Try to acquire the page lock around set_page_dirty() drm/i915/pmu: "Frequency" is reported as accumulated cycles drm/i915: Preload LUTs if the hw isn't currently using them drm/i915: Don't oops in dumb_create ioctl if we have no crtcs
2019-11-22mm/ksm.c: don't WARN if page is still mapped in remove_stable_node()Andrey Ryabinin1-7/+7
It's possible to hit the WARN_ON_ONCE(page_mapped(page)) in remove_stable_node() when it races with __mmput() and squeezes in between ksm_exit() and exit_mmap(). WARNING: CPU: 0 PID: 3295 at mm/ksm.c:888 remove_stable_node+0x10c/0x150 Call Trace: remove_all_stable_nodes+0x12b/0x330 run_store+0x4ef/0x7b0 kernfs_fop_write+0x200/0x420 vfs_write+0x154/0x450 ksys_write+0xf9/0x1d0 do_syscall_64+0x99/0x510 entry_SYSCALL_64_after_hwframe+0x49/0xbe Remove the warning as there is nothing scary going on. Link: http://lkml.kernel.org/r/[email protected] Fixes: cbf86cfe04a6 ("ksm: remove old stable nodes more thoroughly") Signed-off-by: Andrey Ryabinin <[email protected]> Acked-by: Hugh Dickins <[email protected]> Cc: Andrea Arcangeli <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-11-22mm/memory_hotplug: don't access uninitialized memmaps in shrink_zone_span()David Hildenbrand1-3/+13
Let's limit shrinking to !ZONE_DEVICE so we can fix the current code. We should never try to touch the memmap of offline sections where we could have uninitialized memmaps and could trigger BUGs when calling page_to_nid() on poisoned pages. There is no reliable way to distinguish an uninitialized memmap from an initialized memmap that belongs to ZONE_DEVICE, as we don't have anything like SECTION_IS_ONLINE we can use similar to pfn_to_online_section() for !ZONE_DEVICE memory. E.g., set_zone_contiguous() similarly relies on pfn_to_online_section() and will therefore never set a ZONE_DEVICE zone consecutive. Stopping to shrink the ZONE_DEVICE therefore results in no observable changes, besides /proc/zoneinfo indicating different boundaries - something we can totally live with. Before commit d0dc12e86b31 ("mm/memory_hotplug: optimize memory hotplug"), the memmap was initialized with 0 and the node with the right value. So the zone might be wrong but not garbage. After that commit, both the zone and the node will be garbage when touching uninitialized memmaps. Toshiki reported a BUG (race between delayed initialization of ZONE_DEVICE memmaps without holding the memory hotplug lock and concurrent zone shrinking). https://lkml.org/lkml/2019/11/14/1040 "Iteration of create and destroy namespace causes the panic as below: kernel BUG at mm/page_alloc.c:535! CPU: 7 PID: 2766 Comm: ndctl Not tainted 5.4.0-rc4 #6 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 RIP: 0010:set_pfnblock_flags_mask+0x95/0xf0 Call Trace: memmap_init_zone_device+0x165/0x17c memremap_pages+0x4c1/0x540 devm_memremap_pages+0x1d/0x60 pmem_attach_disk+0x16b/0x600 [nd_pmem] nvdimm_bus_probe+0x69/0x1c0 really_probe+0x1c2/0x3e0 driver_probe_device+0xb4/0x100 device_driver_attach+0x4f/0x60 bind_store+0xc9/0x110 kernfs_fop_write+0x116/0x190 vfs_write+0xa5/0x1a0 ksys_write+0x59/0xd0 do_syscall_64+0x5b/0x180 entry_SYSCALL_64_after_hwframe+0x44/0xa9 While creating a namespace and initializing memmap, if you destroy the namespace and shrink the zone, it will initialize the memmap outside the zone and trigger VM_BUG_ON_PAGE(!zone_spans_pfn(page_zone(page), pfn), page) in set_pfnblock_flags_mask()." This BUG is also mitigated by this commit, where we for now stop to shrink the ZONE_DEVICE zone until we can do it in a safe and clean way. Link: http://lkml.kernel.org/r/[email protected] Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319] Signed-off-by: David Hildenbrand <[email protected]> Reported-by: Aneesh Kumar K.V <[email protected]> Reported-by: Toshiki Fukasawa <[email protected]> Cc: Oscar Salvador <[email protected]> Cc: David Hildenbrand <[email protected]> Cc: Michal Hocko <[email protected]> Cc: Pavel Tatashin <[email protected]> Cc: Dan Williams <[email protected]> Cc: Alexander Duyck <[email protected]> Cc: Alexander Potapenko <[email protected]> Cc: Andy Lutomirski <[email protected]> Cc: Anshuman Khandual <[email protected]> Cc: Benjamin Herrenschmidt <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: Christian Borntraeger <[email protected]> Cc: Christophe Leroy <[email protected]> Cc: Damian Tometzki <[email protected]> Cc: Dave Hansen <[email protected]> Cc: Fenghua Yu <[email protected]> Cc: Gerald Schaefer <[email protected]> Cc: Greg Kroah-Hartman <[email protected]> Cc: Halil Pasic <[email protected]> Cc: Heiko Carstens <[email protected]> Cc: "H. Peter Anvin" <[email protected]> Cc: Ingo Molnar <[email protected]> Cc: Ira Weiny <[email protected]> Cc: Jason Gunthorpe <[email protected]> Cc: Jun Yao <[email protected]> Cc: Logan Gunthorpe <[email protected]> Cc: Mark Rutland <[email protected]> Cc: Masahiro Yamada <[email protected]> Cc: "Matthew Wilcox (Oracle)" <[email protected]> Cc: Mel Gorman <[email protected]> Cc: Michael Ellerman <[email protected]> Cc: Mike Rapoport <[email protected]> Cc: Pankaj Gupta <[email protected]> Cc: Paul Mackerras <[email protected]> Cc: Pavel Tatashin <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Qian Cai <[email protected]> Cc: Rich Felker <[email protected]> Cc: Robin Murphy <[email protected]> Cc: Steve Capper <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Tom Lendacky <[email protected]> Cc: Tony Luck <[email protected]> Cc: Vasily Gorbik <[email protected]> Cc: Vlastimil Babka <[email protected]> Cc: Wei Yang <[email protected]> Cc: Wei Yang <[email protected]> Cc: Will Deacon <[email protected]> Cc: Yoshinori Sato <[email protected]> Cc: Yu Zhao <[email protected]> Cc: <[email protected]> [4.13+] Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-11-22Revert "fs: ocfs2: fix possible null-pointer dereferences in ↵Joseph Qi1-23/+33
ocfs2_xa_prepare_entry()" This reverts commit 56e94ea132bb5c2c1d0b60a6aeb34dcb7d71a53d. Commit 56e94ea132bb ("fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()") introduces a regression that fail to create directory with mount option user_xattr and acl. Actually the reported NULL pointer dereference case can be correctly handled by loc->xl_ops->xlo_add_entry(), so revert it. Link: http://lkml.kernel.org/r/[email protected] Fixes: 56e94ea132bb ("fs: ocfs2: fix possible null-pointer dereferences in ocfs2_xa_prepare_entry()") Signed-off-by: Joseph Qi <[email protected]> Reported-by: Thomas Voegtle <[email protected]> Acked-by: Changwei Ge <[email protected]> Cc: Jia-Ju Bai <[email protected]> Cc: Mark Fasheh <[email protected]> Cc: Joel Becker <[email protected]> Cc: Junxiao Bi <[email protected]> Cc: Gang He <[email protected]> Cc: Jun Piao <[email protected]> Cc: <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2019-11-22can: m_can_platform: remove unnecessary m_can_class_resume() callPankaj Sharma1-2/+0
The function m_can_runtime_resume() is getting recursively called from m_can_class_resume(). This results in a lock up. We need not call m_can_class_resume() during m_can_runtime_resume(). Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Signed-off-by: Pankaj Sharma <[email protected]> Signed-off-by: Sriram Dash <[email protected]> Acked-by: Dan Murphy <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2019-11-22can: m_can_platform: set net_device structure as driver dataPankaj Sharma1-1/+1
The current code is failing during clock prepare enable because of not getting proper clock from platform device. [ 0.852089] Call trace: [ 0.854516] 0xffff0000fa22a668 [ 0.857638] clk_prepare+0x20/0x34 [ 0.861019] m_can_runtime_resume+0x2c/0xe4 [ 0.865180] pm_generic_runtime_resume+0x28/0x38 [ 0.869770] __rpm_callback+0x16c/0x1bc [ 0.873583] rpm_callback+0x24/0x78 [ 0.877050] rpm_resume+0x428/0x560 [ 0.880517] __pm_runtime_resume+0x7c/0xa8 [ 0.884593] m_can_clk_start.isra.9.part.10+0x1c/0xa8 [ 0.889618] m_can_class_register+0x138/0x370 [ 0.893950] m_can_plat_probe+0x120/0x170 [ 0.897939] platform_drv_probe+0x4c/0xa0 [ 0.901924] really_probe+0xd8/0x31c [ 0.905477] driver_probe_device+0x58/0xe8 [ 0.909551] device_driver_attach+0x68/0x70 [ 0.913711] __driver_attach+0x9c/0xf8 [ 0.917437] bus_for_each_dev+0x50/0xa0 [ 0.921251] driver_attach+0x20/0x28 [ 0.924804] bus_add_driver+0x148/0x1fc [ 0.928617] driver_register+0x6c/0x124 [ 0.932431] __platform_driver_register+0x48/0x50 [ 0.937113] m_can_plat_driver_init+0x18/0x20 [ 0.941446] do_one_initcall+0x4c/0x19c [ 0.945259] kernel_init_freeable+0x1d0/0x280 [ 0.949591] kernel_init+0x10/0x100 [ 0.953057] ret_from_fork+0x10/0x18 [ 0.956614] Code: 00000000 00000000 00000000 00000000 (fa22a668) [ 0.962681] ---[ end trace 881f71bd609de763 ]--- [ 0.967301] Kernel panic - not syncing: Attempted to kill init! A device driver for CAN controller hardware registers itself with the Linux network layer as a network device. So, the driver data for m_can should ideally be of type net_device. Fixes: f524f829b75a ("can: m_can: Create a m_can platform framework") Signed-off-by: Pankaj Sharma <[email protected]> Signed-off-by: Sriram Dash <[email protected]> Acked-by: Dan Murphy <[email protected]> Signed-off-by: Marc Kleine-Budde <[email protected]>
2019-11-22mac80211: Use Airtime-based Queue Limits (AQL) on packet dequeueToke Høiland-Jørgensen3-0/+60
The previous commit added the ability to throttle stations when they queue too much airtime in the hardware. This commit enables the functionality by calculating the expected airtime usage of each packet that is dequeued from the TXQs in mac80211, and accounting that as pending airtime. The estimated airtime for each skb is stored in the tx_info, so we can subtract the same amount from the running total when the skb is freed or recycled. The throttling mechanism relies on this accounting to be accurate (i.e., that we are not freeing skbs without subtracting any airtime they were accounted for), so we put the subtraction into ieee80211_report_used_skb(). As an optimisation, we also subtract the airtime on regular TX completion, zeroing out the value stored in the packet afterwards, to avoid having to do an expensive lookup of the station from the packet data on every packet. This patch does *not* include any mechanism to wake a throttled TXQ again, on the assumption that this will happen anyway as a side effect of whatever freed the skb (most commonly a TX completion). Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2019-11-22mac80211: Implement Airtime-based Queue Limit (AQL)Kan Yan9-14/+244
In order for the Fq_CoDel algorithm integrated in mac80211 layer to operate effectively to control excessive queueing latency, the CoDel algorithm requires an accurate measure of how long packets stays in the queue, AKA sojourn time. The sojourn time measured at the mac80211 layer doesn't include queueing latency in the lower layer (firmware/hardware) and CoDel expects lower layer to have a short queue. However, most 802.11ac chipsets offload tasks such TX aggregation to firmware or hardware, thus have a deep lower layer queue. Without a mechanism to control the lower layer queue size, packets only stay in mac80211 layer transiently before being sent to firmware queue. As a result, the sojourn time measured by CoDel in the mac80211 layer is almost always lower than the CoDel latency target, hence CoDel does little to control the latency, even when the lower layer queue causes excessive latency. The Byte Queue Limits (BQL) mechanism is commonly used to address the similar issue with wired network interface. However, this method cannot be applied directly to the wireless network interface. "Bytes" is not a suitable measure of queue depth in the wireless network, as the data rate can vary dramatically from station to station in the same network, from a few Mbps to over Gbps. This patch implements an Airtime-based Queue Limit (AQL) to make CoDel work effectively with wireless drivers that utilized firmware/hardware offloading. AQL allows each txq to release just enough packets to the lower layer to form 1-2 large aggregations to keep hardware fully utilized and retains the rest of the frames in mac80211 layer to be controlled by the CoDel algorithm. Signed-off-by: Kan Yan <[email protected]> [ Toke: Keep API to set pending airtime internal, fix nits in commit msg ] Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2019-11-22mac80211: Import airtime calculation code from mt76Toke Høiland-Jørgensen4-1/+632
Felix recently added code to calculate airtime of packets to the mt76 driver. Import this into mac80211 so we can use it for airtime queue limit calculations. The airtime.c file is copied verbatim from the mt76 driver, and adjusted to be usable in mac80211. This involves: - Switching to mac80211 data structures. - Adding support for 160 MHz channels and HE mode. - Moving the symbol and duration calculations around a bit to avoid rounding with the higher rates and longer symbol times used for HE rates. The per-rate TX rate calculation is also split out to its own function so it can be used directly for the AQL calculations later. Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Link: https://lore.kernel.org/r/[email protected] [fix HE_GROUP_IDX() to use 3 * bw, since there are 3 _gi values] Signed-off-by: Johannes Berg <[email protected]>
2019-11-22virt_wifi: fix use-after-free in virt_wifi_newlink()Taehee Yoo1-2/+2
When virt_wifi interface is created, virt_wifi_newlink() is called and it calls register_netdevice(). if register_netdevice() fails, it internally would call ->priv_destructor(), which is virt_wifi_net_device_destructor() and it frees netdev. but virt_wifi_newlink() still use netdev. So, use-after-free would occur in virt_wifi_newlink(). Test commands: ip link add dummy0 type dummy modprobe bonding ip link add bonding_masters link dummy0 type virt_wifi Splat looks like: [ 202.220554] BUG: KASAN: use-after-free in virt_wifi_newlink+0x88b/0x9a0 [virt_wifi] [ 202.221659] Read of size 8 at addr ffff888061629cb8 by task ip/852 [ 202.222896] CPU: 1 PID: 852 Comm: ip Not tainted 5.4.0-rc5 #3 [ 202.223765] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [ 202.225073] Call Trace: [ 202.225532] dump_stack+0x7c/0xbb [ 202.226869] print_address_description.constprop.5+0x1be/0x360 [ 202.229362] __kasan_report+0x12a/0x16f [ 202.230714] kasan_report+0xe/0x20 [ 202.232595] virt_wifi_newlink+0x88b/0x9a0 [virt_wifi] [ 202.233370] __rtnl_newlink+0xb9f/0x11b0 [ 202.244909] rtnl_newlink+0x65/0x90 [ ... ] Cc: [email protected] Fixes: c7cdba31ed8b ("mac80211-next: rtnetlink wifi simulation device") Signed-off-by: Taehee Yoo <[email protected]> Link: https://lore.kernel.org/r/[email protected] [trim stack dump a bit] Signed-off-by: Johannes Berg <[email protected]>
2019-11-22mac80211: consider QoS Null frames for STA_NULLFUNC_ACKEDThomas Pedersen1-1/+2
Commit 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing") let STAs send QoS Null frames as PS triggers if the AP was a QoS STA. However, the mac80211 PS stack relies on an interface flag IEEE80211_STA_NULLFUNC_ACKED for determining trigger frame ACK, which was not being set for acked non-QoS Null frames. The effect is an inability to trigger hardware sleep via IEEE80211_CONF_PS since the QoS Null frame was seemingly never acked. This bug only applies to drivers which set both IEEE80211_HW_REPORTS_TX_ACK_STATUS and IEEE80211_HW_PS_NULLFUNC_STACK. Detect the acked QoS Null frame to restore STA power save. Fixes: 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing") Signed-off-by: Thomas Pedersen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2019-11-22mac80211: expose HW conf flags through debugfsThomas Pedersen1-0/+3
This is useful during testing to eg. check the currently configured HW power save state. Signed-off-by: Thomas Pedersen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2019-11-22Bluetooth: btbcm: Use the BDADDR_PROPERTY quirkAndre Heider1-0/+6
Some devices ship with the controller default address, like the Orange Pi 3 (BCM4345C5). Allow the bootloader to set a valid address through the device tree. Signed-off-by: Andre Heider <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2019-11-22mac80211: Add new sta_info getter by sta/vif addrsToke Høiland-Jørgensen3-8/+20
In ieee80211_tx_status() we don't have an sdata struct when looking up the destination sta. Instead, we just do a lookup by the vif addr that is the source of the packet being completed. Factor this out into a new sta_info getter helper, since we need to use it for accounting AQL as well. Signed-off-by: Toke Høiland-Jørgensen <[email protected]> Link: https://lore.kernel.org/r/[email protected] [remove internal rcu_read_lock(), document instead] Signed-off-by: Johannes Berg <[email protected]>
2019-11-22mac80211: add a comment about monitor-to-dev injectionJohannes Berg1-0/+3
Add a note with a use-case for the monitor-to-dev injection mechanism in mac80211, reported by Ben Greear. Change-Id: I6456997ef9bc40b24ede860b6ef2fed5af49cf44 Signed-off-by: Johannes Berg <[email protected]>
2019-11-22Bluetooth: Fix memory leak in hci_connect_le_scanNavid Emamdoost1-1/+3
In the implementation of hci_connect_le_scan() when conn is added via hci_conn_add(), if hci_explicit_conn_params_set() fails the allocated memory for conn is leaked. Use hci_conn_del() to release it. Fixes: f75113a26008 ("Bluetooth: add hci_connect_le_scan") Signed-off-by: Navid Emamdoost <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2019-11-22Bluetooth: Allow combination of BDADDR_PROPERTY and INVALID_BDADDR quirksMarcel Holtmann1-2/+24
When utilizing BDADDR_PROPERTY and INVALID_BDADDR quirks together it results in an unconfigured controller even if the bootloader provides a valid address. Fix this by allowing a bootloader provided address to mark the controller as configured. Signed-off-by: Marcel Holtmann <[email protected]> Tested-by: Andre Heider <[email protected]> Signed-off-by: Johan Hedberg <[email protected]>
2019-11-21Merge branch 'hv_netvsc-Fix-send-indirection-table-offset'David S. Miller2-9/+32
Haiyang Zhang says: ==================== hv_netvsc: Fix send indirection table offset Fix send indirection table offset issues related to guest and host bugs. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-11-21hv_netvsc: Fix send_table offset in case of a host bugHaiyang Zhang1-2/+14
If negotiated NVSP version <= NVSP_PROTOCOL_VERSION_6, the offset may be wrong (too small) due to a host bug. This can cause missing the end of the send indirection table, and add multiple zero entries from leading zeros before the data region. This bug adds extra burden on channel 0. So fix the offset by computing it from the data structure sizes. This will ensure netvsc driver runs normally on unfixed hosts, and future fixed hosts. Fixes: 5b54dac856cb ("hyperv: Add support for virtual Receive Side Scaling (vRSS)") Signed-off-by: Haiyang Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21hv_netvsc: Fix offset usage in netvsc_send_table()Haiyang Zhang2-9/+20
To reach the data region, the existing code adds offset in struct nvsp_5_send_indirect_table on the beginning of this struct. But the offset should be based on the beginning of its container, struct nvsp_message. This bug causes the first table entry missing, and adds an extra zero from the zero pad after the data region. This can put extra burden on the channel 0. So, correct the offset usage. Also add a boundary check to ensure not reading beyond data region. Fixes: 5b54dac856cb ("hyperv: Add support for virtual Receive Side Scaling (vRSS)") Signed-off-by: Haiyang Zhang <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21enetc: make enetc_setup_tc_mqprio staticMao Wenan1-1/+1
While using ARCH=mips CROSS_COMPILE=mips-linux-gnu- command to compile, make C=2 drivers/net/ethernet/freescale/enetc/enetc.o one warning can be found: drivers/net/ethernet/freescale/enetc/enetc.c:1439:5: warning: symbol 'enetc_setup_tc_mqprio' was not declared. Should it be static? This patch make symbol enetc_setup_tc_mqprio static. Fixes: 34c6adf1977b ("enetc: Configure the Time-Aware Scheduler via tc-taprio offload") Signed-off-by: Mao Wenan <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21net-ipv6: IPV6_TRANSPARENT - check NET_RAW prior to NET_ADMINMaciej Żenczykowski1-2/+2
NET_RAW is less dangerous, so more likely to be available to a process, so check it first to prevent some spurious logging. This matches IP_TRANSPARENT which checks NET_RAW first. Signed-off-by: Maciej Żenczykowski <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-22Merge tag 'drm-intel-fixes-2019-11-21' of ↵Dave Airlie9-18/+141
git://anongit.freedesktop.org/drm/drm-intel into drm-fixes - Fix kernel oops on dumb_create ioctl on no crtc situation - Fix bad ugly colored flash on VLV/CHV related to gamma LUT update - Fix unity of the frequencies reported on PMU - Fix kernel oops on set_page_dirty using better locks around it - Protect the request pointer with RCU to prevent it being freed while we might need still - Make pool objects read-only - Restore physical addresses for fb_map to avoid corrupted page table Signed-off-by: Dave Airlie <[email protected]> From: Rodrigo Vivi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2019-11-21Merge branch 'net-introduce-and-use-route-hint'David S. Miller10-16/+160
Paolo Abeni says: ==================== net: introduce and use route hint This series leverages the listification infrastructure to avoid unnecessary route lookup on ingress packets. In absence of custom rules, packets with equal daddr will usually land on the same dst. When processing packet bursts (lists) we can easily reference the previous dst entry. When we hit the 'same destination' condition we can avoid the route lookup, coping the already available dst. Detailed performance numbers are available in the individual commit messages. v3 -> v4: - move helpers to their own patches (Eric D.) - enable hints for SUBTREE builds (David A.) - re-enable hints for ipv4 forward (David A.) v2 -> v3: - use fib*_has_custom_rules() helpers (David A.) - add ip*_extract_route_hint() helper (Edward C.) - use prev skb as hint instead of copying data (Willem ) v1 -> v2: - fix build issue with !CONFIG_IP*_MULTIPLE_TABLES - fix potential race in ip6_list_rcv_finish() ==================== Acked-by: Edward Cree <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21ipv4: use dst hint for ipv4 list receivePaolo Abeni3-4/+77
This is alike the previous change, with some additional ipv4 specific quirk. Even when using the route hint we still have to do perform additional per packet checks about source address validity: a new helper is added to wrap them. Hints are explicitly disabled if the destination is a local broadcast, that keeps the code simple and local broadcast are a slower path anyway. UDP flood performances vs recvmmsg() receiver: vanilla patched delta Kpps Kpps % 1683 1871 +11 In the worst case scenario - each packet has a different destination address - the performance delta is within noise range. v3 -> v4: - re-enable hints for forward v2 -> v3: - really fix build (sic) and hint usage check - use fib4_has_custom_rules() helpers (David A.) - add ip_extract_route_hint() helper (Edward C.) - use prev skb as hint instead of copying data (Willem) v1 -> v2: - fix build issue with !CONFIG_IP_MULTIPLE_TABLES Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21ipv4: move fib4_has_custom_rules() helper to public headerPaolo Abeni2-10/+10
So that we can use it in the next patch. Additionally constify the helper argument. Suggested-by: David Ahern <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21ipv6: introduce and uses route look hints for list input.Paolo Abeni1-2/+24
When doing RX batch packet processing, we currently always repeat the route lookup for each ingress packet. When no custom rules are in place, and there aren't routes depending on source addresses, we know that packets with the same destination address will use the same dst. This change tries to avoid per packet route lookup caching the destination address of the latest successful lookup, and reusing it for the next packet when the above conditions are in place. Ingress traffic for most servers should fit. The measured performance delta under UDP flood vs a recvmmsg receiver is as follow: vanilla patched delta Kpps Kpps % 1431 1674 +17 In the worst-case scenario - each packet has a different destination address - the performance delta is within noise range. v3 -> v4: - support hints for SUBFLOW build, too (David A.) - several style fixes (Eric) v2 -> v3: - add fib6_has_custom_rules() helpers (David A.) - add ip6_extract_route_hint() helper (Edward C.) - use hint directly in ip6_list_rcv_finish() (Willem) v1 -> v2: - fix build issue with !CONFIG_IPV6_MULTIPLE_TABLES - fix potential race when fib6_has_custom_rules is set while processing a packet batch Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21ipv6: keep track of routes using srcPaolo Abeni4-0/+40
Use a per namespace counter, increment it on successful creation of any route using the source address, decrement it on deletion of such routes. This allows us to check easily if the routing decision in the current namespace depends on the packet source. Will be used by the next patch. Suggested-by: David Ahern <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21ipv6: add fib6_has_custom_rules() helperPaolo Abeni1-0/+9
It wraps the namespace field with the same name, to easily access it regardless of build options. Suggested-by: David Ahern <[email protected]> Suggested-by: Eric Dumazet <[email protected]> Signed-off-by: Paolo Abeni <[email protected]> Reviewed-by: David Ahern <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21Merge branch 'DSA-Felix-PTP'David S. Miller7-82/+222
Yangbo Lu says: ==================== Support PTP clock and hardware timestamping for DSA Felix driver This patch-set is to support PTP clock and hardware timestamping for DSA Felix driver. Some functions in ocelot.c/ocelot_board.c driver were reworked/exported, so that DSA Felix driver was able to reuse them as much as possible. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-11-21net: dsa: ocelot: add hardware timestamping support for FelixYangbo Lu2-1/+102
This patch is to reuse ocelot functions as possible to enable PTP clock and to support hardware timestamping on Felix. On TX path, timestamping works on packet which requires timestamp. The injection header will be configured accordingly, and skb clone requires timestamp will be added into a list. The TX timestamp is final handled in threaded interrupt handler when PTP timestamp FIFO is ready. On RX path, timestamping is always working. The RX timestamp could be got from extraction header. Signed-off-by: Yangbo Lu <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-11-21net: dsa: ocelot: define PTP registers for felix_vsc9959Yangbo Lu1-0/+16
This patch is to define PTP registers for felix_vsc9959. Signed-off-by: Yangbo Lu <[email protected]> Reviewed-by: Florian Fainelli <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.