aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-05-09cpuidle: Fix incorrect optimizationArjan van de Ven1-5/+4
commit 672917dcc78 ("cpuidle: menu governor: reduce latency on exit") added an optimization, where the analysis on the past idle period moved from the end of idle, to the beginning of the new idle. Unfortunately, this optimization had a bug where it zeroed one key variable for new use, that is needed for the analysis. The fix is simple, zero the variable after doing the work from the previous idle. During the audit of the code that found this issue, another issue was also found; the ->measured_us data structure member is never set, a local variable is always used instead. Signed-off-by: Arjan van de Ven <[email protected]> Cc: Corrado Zoccolo <[email protected]> Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
2010-05-07HID: fix suspend crash by moving initializations earlierAlan Stern1-7/+6
Although the usbhid driver allocates its usbhid structure in the probe routine, several critical fields in that structure don't get initialized until usbhid_start(). However if report descriptor parsing fails then usbhid_start() is never called. This leads to problems during system suspend -- the system will freeze. This patch (as1378) fixes the bug by moving the initialization statements up into usbhid_probe(). Signed-off-by: Alan Stern <[email protected]> Reported-by: Bruno Prémont <[email protected]> Tested-By: Bruno Prémont <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2010-05-07Merge branch 'for-linus' of git://neil.brown.name/mdLinus Torvalds2-3/+9
* 'for-linus' of git://neil.brown.name/md: md: restore ability of spare drives to spin down. md/raid6: Fix raid-6 read-error correction in degraded state
2010-05-07Merge branch 'urgent' of ↵Linus Torvalds3-13/+11
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: fix compilation after 16bit state locking changes pcmcia: order userspace suspend and resume requests pcmcia: avoid pccard_validate_cis failure in resume callpath
2010-05-07Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds3-5/+7
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: blk-cgroup: Fix an RCU warning in blkiocg_create() blk-cgroup: Fix RCU correctness warning in cfq_init_queue() drbd: don't expose failed local READ to upper layers
2010-05-07Merge branch 'drm-linus' of ↵Linus Torvalds4-61/+4
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm/ttm: Remove the ttm_bo_block_reservation() function. drm/ttm: Remove some leftover debug messages. drm/radeon: async event synchronization for drmWaitVblank
2010-05-07virtio: initialize earlierStijn Tintel1-1/+1
Move initialization of the virtio framework before the initialization of mtd, so that block2mtd can be used on virtio-based block devices. Addresses https://bugzilla.kernel.org/show_bug.cgi?id=15644 Signed-off-by: Stijn Tintel <[email protected]> Signed-off-by: Rusty Russell <[email protected]> Cc: [email protected] Signed-off-by: Linus Torvalds <[email protected]>
2010-05-07Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6Linus Torvalds1-35/+51
* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6: NFS: Fix RCU issues in the NFSv4 delegation code NFSv4: Fix the locking in nfs_inode_reclaim_delegation()
2010-05-07Merge branch 'release' of ↵Linus Torvalds8-26/+160
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: sleep: init_set_sci_en_on_resume for Dell Studio 155x ACPI: fix acpi_hest_firmware_first_pci() caused oops sbshc: acpi_device_class "smbus_host_controller" too long power_meter: acpi_device_class "power_meter_resource" too long acpi_pad: "processor_aggregator" name too long PNP: don't check for conflicts with bridge windows ACPI: DMI init_set_sci_en_on_resume for multiple Lenovo ThinkPads PNPACPI: compute Address Space length rather than using _LEN ACPI: silence kmemcheck false positive
2010-05-07Merge branch 'v4l_for_2.6.34' of ↵Linus Torvalds21-65/+90
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6 * 'v4l_for_2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6: V4L/DVB: pxa_camera: move fifo reset direct before dma start V4L/DVB: video: testing unsigned for less than 0 V4L/DVB: mx1-camera: compile fix V4L/DVB: budget: Oops: "BUG: unable to handle kernel NULL pointer dereference" V4L/DVB: ngene: Workaround for stuck DiSEqC pin V4L/DVB: saa7146: fix regression of the av7110/budget-av driver V4L/DVB: v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not V4L1 V4L/DVB: feature-removal: announce videotext.h removal V4L/DVB: V4L - vpfe capture - fix for kernel crash V4L/DVB: gspca: make usb id 0461:0815 get handled by the right driver V4L/DVB: gspca - stv06xx: Remove the 046d:08da from the stv06xx driver V4L/DVB: gspca - sn9c20x: Correct onstack wait_queue_head declaration V4L/DVB: saa7146: fix up bytesperline if it is an impossible value V4L/DVB: V4L: vpfe_capture - free ccdc_lock when memory allocation fails V4L/DVB: V4L - Makfile:Removed duplicate entry of davinci V4L/DVB: omap24xxcam: potential buffer overflow
2010-05-07Merge branch 'core-fixes-for-linus' of ↵Linus Torvalds6-10/+43
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: rcu: create rcu_my_thread_group_empty() wrapper memcg: css_id() must be called under rcu_read_lock() cgroup: Check task_lock in task_subsys_state() sched: Fix an RCU warning in print_task() cgroup: Fix an RCU warning in alloc_css_id() cgroup: Fix an RCU warning in cgroup_path() KEYS: Fix an RCU warning in the reading of user keys KEYS: Fix an RCU warning
2010-05-07mac80211: remove association work when processing deauth requestReinette Chatre1-1/+2
In https://bugzilla.kernel.org/show_bug.cgi?id=15794 a user encountered the following: [18967.469098] wlan0: authenticated [18967.472527] wlan0: associate with 00:1c:10:b8:e3:ea (try 1) [18967.472585] wlan0: deauthenticating from 00:1c:10:b8:e3:ea by local choice (reason=3) [18967.672057] wlan0: associate with 00:1c:10:b8:e3:ea (try 2) [18967.872357] wlan0: associate with 00:1c:10:b8:e3:ea (try 3) [18968.072960] wlan0: association with 00:1c:10:b8:e3:ea timed out [18968.076890] ------------[ cut here ]------------ [18968.076898] WARNING: at net/wireless/mlme.c:341 cfg80211_send_assoc_timeout+0xa8/0x140() [18968.076900] Hardware name: GX628 [18968.076924] Pid: 1408, comm: phy0 Not tainted 2.6.34-rc4-00082-g250541f-dirty #3 [18968.076926] Call Trace: [18968.076931] [<ffffffff8103459e>] ? warn_slowpath_common+0x6e/0xb0 [18968.076934] [<ffffffff8157c2d8>] ? cfg80211_send_assoc_timeout+0xa8/0x140 [18968.076937] [<ffffffff8103ff8b>] ? mod_timer+0x10b/0x180 [18968.076940] [<ffffffff8158f0fc>] ? ieee80211_assoc_done+0xbc/0xc0 [18968.076943] [<ffffffff81590d53>] ? ieee80211_work_work+0x553/0x11c0 [18968.076945] [<ffffffff8102d931>] ? finish_task_switch+0x41/0xb0 [18968.076948] [<ffffffff81590800>] ? ieee80211_work_work+0x0/0x11c0 [18968.076951] [<ffffffff810476fb>] ? worker_thread+0x13b/0x210 [18968.076954] [<ffffffff8104b6b0>] ? autoremove_wake_function+0x0/0x30 [18968.076956] [<ffffffff810475c0>] ? worker_thread+0x0/0x210 [18968.076959] [<ffffffff8104b21e>] ? kthread+0x8e/0xa0 [18968.076962] [<ffffffff810031f4>] ? kernel_thread_helper+0x4/0x10 [18968.076964] [<ffffffff8104b190>] ? kthread+0x0/0xa0 [18968.076966] [<ffffffff810031f0>] ? kernel_thread_helper+0x0/0x10 [18968.076968] ---[ end trace 8aa6265f4b1adfe0 ]--- As explained by Johannes Berg <[email protected]>: We authenticate successfully, and then userspace requests association. Then we start that process, but the AP doesn't respond. While we're still waiting for an AP response, userspace asks for a deauth. We do the deauth, but don't abort the association work. Then once the association work times out we tell cfg80211, but it no longer wants to know since for all it is concerned we accepted the deauth that also kills the association attempt. Fix this by, upon receipt of deauth request, removing the association work and continuing to send the deauth. Unfortunately the user reporting the issue is not able to reproduce this problem anymore and cannot verify this fix. This seems like a well understood issue though and I thus present the patch. Bug-identified-by: Johannes Berg <[email protected]> Signed-off-by: Reinette Chatre <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2010-05-07ar9170: wait for asynchronous firmware loadingChristian Lamparter2-0/+12
This patch fixes a regression introduced by the following patch: "ar9170: load firmware asynchronously" When we kick off a firmware loading request and then unbind, or disconnect the usb device right away, we get into trouble: > ------------[ cut here ]------------ > WARNING: at lib/kref.c:44 kref_get+0x1c/0x20() > Hardware name: 18666GU > Modules linked in: ar9170usb [...] > Pid: 6588, comm: firmware/ar9170 Not tainted 2.6.34-rc5-wl #43 > Call Trace: > [<c102b05e>] ? warn_slowpath_common+0x6e/0xb0 > [<c117c93c>] ? kref_get+0x1c/0x20 > [<c102b0b3>] ? warn_slowpath_null+0x13/0x20 > [<c117c93c>] ? kref_get+0x1c/0x20 > [<c117bb2f>] ? kobject_get+0xf/0x20 > [<c124d630>] ? get_device+0x10/0x20 > [<c124e5a0>] ? device_add+0x60/0x530 > [<c117b8b5>] ? kobject_init+0x25/0xa0 > [<c12569f9>] ? _request_firmware+0x139/0x3e0 > [<c1256cc0>] ? request_firmware_work_func+0x20/0x70 > [<c1256ca0>] ? request_firmware_work_func+0x0/0x70 > [<c103ff24>] ? kthread+0x74/0x80 > [<c103feb0>] ? kthread+0x0/0x80 > [<c1003136>] ? kernel_thread_helper+0x6/0x10 >---[ end trace 2d50bd818f64a1b7 ]--- - followed by a random Oops - Avoid that by waiting for the firmware loading to finish (whether successfully or not) before the unbind in ar9170_usb_disconnect. Reported-by: Johannes Berg <[email protected]> Bug-fixed-by: Johannes Berg <[email protected]> Signed-off-by: Christian Lamparter <[email protected]> Signed-off-by: John W. Linville <[email protected]>
2010-05-07md: restore ability of spare drives to spin down.NeilBrown1-2/+8
Some time ago we stopped the clean/active metadata updates from being written to a 'spare' device in most cases so that it could spin down and say spun down. Device failure/removal etc are still recorded on spares. However commit 51d5668cb2e3fd1827a55 broke this 50% of the time, depending on whether the event count is even or odd. The change log entry said: This means that the alignment between 'odd/even' and 'clean/dirty' might take a little longer to attain, how ever the code makes no attempt to create that alignment, so it could take arbitrarily long. So when we find that clean/dirty is not aligned with odd/even, force a second metadata-update immediately. There are already cases where a second metadata-update is needed immediately (e.g. when a device fails during the metadata update). We just piggy-back on that. Reported-by: Joe Bryant <[email protected]> Signed-off-by: NeilBrown <[email protected]> Cc: [email protected]
2010-05-07md/raid6: Fix raid-6 read-error correction in degraded stateGabriele A. Trombetti1-1/+1
Fix: Raid-6 was not trying to correct a read-error when in singly-degraded state and was instead dropping one more device, going to doubly-degraded state. This patch fixes this behaviour. Tested-by: Janos Haar <[email protected]> Signed-off-by: Gabriele A. Trombetti <[email protected]> Reported-by: Janos Haar <[email protected]> Signed-off-by: NeilBrown <[email protected]> Cc: [email protected]
2010-05-07ALSA: hda - fix DG45ID SPDIF outputWu Fengguang1-4/+2
This reverts part of commit 52dc438606d1e, in order to fix a regression: broken SPDIF output on Intel DG45FC motherboard (IDT 92HD73E1X5 codec). --- DG45FC-IDT-codec-2.6.32 (SPDIF OK) +++ DG45FC-IDT-codec-2.6.33 (SPDIF broken) Node 0x22 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x00000010: OUT - Pin Default 0x40f000f0: [N/A] Other at Ext N/A - Conn = Unknown, Color = Unknown - DefAssociation = 0xf, Sequence = 0x0 - Pin-ctls: 0x00: + Pin Default 0x014510a0: [Jack] SPDIF Out at Ext Rear + Conn = Optical, Color = Black + DefAssociation = 0xa, Sequence = 0x0 + Pin-ctls: 0x40: OUT Connection: 3 0x25* 0x20 0x21 Node 0x23 [Pin Complex] wcaps 0x400301: Stereo Digital Pincap 0x00000010: OUT - Pin Default 0x01451140: [Jack] SPDIF Out at Ext Rear + Pin Default 0x074510b0: [Jack] SPDIF Out at Ext Rear Panel Conn = Optical, Color = Black - DefAssociation = 0x4, Sequence = 0x0 - Misc = NO_PRESENCE - Pin-ctls: 0x40: OUT + DefAssociation = 0xb, Sequence = 0x0 + Pin-ctls: 0x00: Connection: 3 0x26* 0x20 0x21 Cc: <[email protected]> Cc: Alexey Fisher <[email protected]> Tested-by: David Härdeman <[email protected]> Signed-off-by: Wu Fengguang <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2010-05-07blk-cgroup: Fix an RCU warning in blkiocg_create()Li Zefan1-4/+4
with CONFIG_PROVE_RCU=y, a warning can be triggered: # mount -t cgroup -o blkio xxx /mnt # mkdir /mnt/subgroup ... kernel/cgroup.c:4442 invoked rcu_dereference_check() without protection! ... To fix this, we avoid caling css_depth() here, which is a bit simpler than the original code. Signed-off-by: Li Zefan <[email protected]> Acked-by: Vivek Goyal <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2010-05-06ipv4: udp: fix short packet and bad checksum loggingBjørn Mork1-3/+3
commit 2783ef23 moved the initialisation of saddr and daddr after pskb_may_pull() to avoid a potential data corruption. Unfortunately also placing it after the short packet and bad checksum error paths, where these variables are used for logging. The result is bogus output like [92238.389505] UDP: short packet: From 2.0.0.0:65535 23715/178 to 0.0.0.0:65535 Moving the saddr and daddr initialisation above the error paths, while still keeping it after the pskb_may_pull() to keep the fix from commit 2783ef23. Signed-off-by: Bjørn Mork <[email protected]> Cc: [email protected] Acked-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-05-06Merge branches 'bugzilla-14337', 'bugzilla-14998', 'bugzilla-15407', ↵Len Brown596-3088/+8675
'bugzilla-15903' and 'misc-2.6.34' into release
2010-05-07drm/ttm: Remove the ttm_bo_block_reservation() function.Thomas Hellstrom2-57/+1
It's unused and buggy in its current form, since it can place a bo in the reserved state without removing it from lru lists. Signed-off-by: Thomas Hellstrom <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-05-07drm/ttm: Remove some leftover debug messages.Thomas Hellstrom1-4/+1
Signed-off-by: Thomas Hellstrom <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-05-07drm/radeon: async event synchronization for drmWaitVblankJerome Glisse1-0/+2
Bring radeon up to speed with the async event synchronization for drmWaitVblank. See c9a9c5e02aedc1a2815877b0268f886d2640b771 for more information. Without this patch event never get delivered to userspace client. Signed-off-by: Jerome Glisse <[email protected]> Signed-off-by: Dave Airlie <[email protected]>
2010-05-06V4L/DVB: pxa_camera: move fifo reset direct before dma startStefan Herbrechtsmeier1-5/+6
Move the fifo reset from pxa_camera_start_capture to pxa_camera_irq direct before the dma start after an end of frame interrupt to prevent images from shifting because of old data at the begin of the frame. Signed-off-by: Stefan Herbrechtsmeier <[email protected]> Acked-by: Robert Jarzmik <[email protected]> Tested-by: Antonio Ospite <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-05-06V4L/DVB: video: testing unsigned for less than 0Dan Carpenter1-1/+1
soc_mbus_bytes_per_line() returns -EINVAL on error but we store it in an unsigned int so the test for less than zero doesn't work. I think it always returns "small" positive values so we can just cast it to int here. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-05-06V4L/DVB: mx1-camera: compile fixUwe Kleine-König2-6/+10
This fixes a regression of 7d58289 (mx1: prefix SOC specific defines with MX1_ and deprecate old names) Signed-off-by: Uwe Kleine-König <[email protected]> Acked-by: Sascha Hauer <[email protected]> Signed-off-by: Guennadi Liakhovetski <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-05-06V4L/DVB: budget: Oops: "BUG: unable to handle kernel NULL pointer dereference"Bjørn Mork1-3/+0
Never call dvb_frontend_detach if we failed to attach a frontend. This fixes the following oops, which will be triggered by a missing stv090x module: [ 8.172997] DVB: registering new adapter (TT-Budget S2-1600 PCI) [ 8.209018] adapter has MAC addr = 00:d0:5c:cc:a7:29 [ 8.328665] Intel ICH 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 8.328753] Intel ICH 0000:00:1f.5: setting latency timer to 64 [ 8.562047] DVB: Unable to find symbol stv090x_attach() [ 8.562117] BUG: unable to handle kernel NULL pointer dereference at 000000ac [ 8.562239] IP: [<e08b04a3>] dvb_frontend_detach+0x4/0x67 [dvb_core] Ref http://bugs.debian.org/575207 Signed-off-by: Bjørn Mork <[email protected]> Cc: [email protected] Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-05-06V4L/DVB: ngene: Workaround for stuck DiSEqC pinOliver Endriss1-0/+4
Send one DiSEqC byte to make sure that the pin is set to low level. Signed-off-by: Oliver Endriss <[email protected]> Reviewed-by: Manu Abraham <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-05-06V4L/DVB: saa7146: fix regression of the av7110/budget-av driverHans Verkuil5-23/+13
An earlier regression fix for the mxb driver (V4L/DVB: saa7146_vv: fix regression where v4l2_device was registered too late) caused a new regression in the av7110 driver. Reverted the old fix and fixed the problem in the mxb driver instead. Tested on mxb and budget-av cards. The real problem is that the saa7146 framework has separate probe() and attach() driver callbacks which should be rolled into one. This is now done for the mxb driver, but others should do the same. Lack of hardware makes this hard to do, though. I hope to get hold of some hexium cards and then I can try to improve the framework to prevent this from happening again. Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-05-06V4L/DVB: v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not ↵Hans Verkuil1-2/+2
V4L1 v4l: fix config dependencies: mxb and saa7191 are V4L2 drivers, not V4L1 Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-05-06V4L/DVB: feature-removal: announce videotext.h removalHans Verkuil1-0/+23
Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-05-06V4L/DVB: V4L - vpfe capture - fix for kernel crashMuralidharan Karicheri1-13/+20
As part of upstream merge, set_params() function was removed from isif.c. This requires removal of BUG_ON() and check for set_params ptr in vpfe_capture.c. Without this kernel crash dump is seen while bootup on DM365 Also made following changes:- 1) converted error messages to debug messages since it is not right to flood the console with error messages for user mistakes. 2) returns -EINVAL if ioctl is not supported Signed-off-by: Muralidharan Karicheri <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-05-06V4L/DVB: gspca: make usb id 0461:0815 get handled by the right driverJohn Ellson2-1/+1
The 0461:0815 camera is spca561 based not spca508 Signed-off-by: John Ellson <[email protected]> Signed-off-by: Hans de Goede <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-05-06V4L/DVB: gspca - stv06xx: Remove the 046d:08da from the stv06xx driverErik Andrén1-2/+0
The 046d:08da usb id shouldn't be associated with the stv06xx driver as they're not compatible with each other. This fixes a bug where Quickcam Messenger cams fail to use its proper driver (gspca-zc3xx), rendering the camera inoperable. Signed-off-by: Erik Andrén <[email protected]> Tested-by: Gabriel Craciunescu <[email protected]> Signed-off-by: Jean-François Moine <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-05-06V4L/DVB: gspca - sn9c20x: Correct onstack wait_queue_head declarationYong Zhang1-1/+1
Use DECLARE_WAIT_QUEUE_HEAD_ONSTACK to make lockdep happy Signed-off-by: Yong Zhang <[email protected]> Signed-off-by: Jean-François Moine <[email protected]> CC: Brian Johnson <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-05-06V4L/DVB: saa7146: fix up bytesperline if it is an impossible valueMichael Hunold1-3/+5
xawtv using DGA on a Radeon graphics card provides bogus values to S_FBUF, which will then screw up overlay video: https://bugs.launchpad.net/ubuntu/+source/xawtv/+bug/499734 This fixes the bytesperline value if it is off completely. Signed-off-by: Michael Hunold <[email protected]> Signed-off-by: Hans Verkuil <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-05-06V4L/DVB: V4L: vpfe_capture - free ccdc_lock when memory allocation failsMurali Karicheri1-2/+3
This patch fixes a bug in vpfe_probe() that doesn't call mutex_unlock() if memory allocation for ccdc_cfg fails. See also the smatch warning report from Dan Carpenter that shows this as an issue. Signed-off-by: Murali Karicheri <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-05-06V4L/DVB: V4L - Makfile:Removed duplicate entry of davinciVaibhav Hiremath1-2/+0
Signed-off-by: Vaibhav Hiremath <[email protected]> Signed-off-by: Muralidharan Karicheri <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-05-06V4L/DVB: omap24xxcam: potential buffer overflowDan Carpenter1-1/+1
The previous loop goes until last == VIDEO_MAX_FRAME, so this could potentially go one past the end of the loop. Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Sakari Ailus <[email protected]> Signed-off-by: Mauro Carvalho Chehab <[email protected]>
2010-05-06ACPI: sleep: init_set_sci_en_on_resume for Dell Studio 155xKamal Mostafa1-0/+24
Add Dell Studio models (1558, 1557, 1555) to the 'set_sci_en_on_resume' list to fix hang on resume. BugLink: http://bugs.launchpad.net/bugs/553498 Signed-off-by: Kamal Mostafa <[email protected]> Acked-by: Alex Chiang <[email protected]> Cc: [email protected] Signed-off-by: Len Brown <[email protected]>
2010-05-06rcu: create rcu_my_thread_group_empty() wrapperPaul E. McKenney2-0/+13
Some RCU-lockdep splat repairs need to know whether they are running in a single-threaded process. Unfortunately, the thread_group_empty() primitive is defined in sched.h, and can induce #include hell. This commit therefore introduces a rcu_my_thread_group_empty() wrapper that is defined in rcupdate.c, thus avoiding the need to include sched.h everywhere. Signed-off-by: "Paul E. McKenney" <[email protected]>
2010-05-06Merge branch 'for-linus' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds24-343/+278
* 'for-linus' of git://git.monstr.eu/linux-2.6-microblaze: microblaze: Defconfig update microblaze: Optimize CACHE_LOOP_LIMITS and CACHE_RANGE_LOOP macros microblaze: Fix consistent-sync code microblaze: Define correct L1_CACHE_SHIFT value microblaze: cpuinfo shows cache line length microblaze: Fix kmalloc alignment on non-coherent DMA platforms microblaze: Fix typo fault in cache code microblaze: Fix consistent code microblaze: pci-dma: use include/linux/dma-mapping.h microblaze: page.h: Remove get_user_page and free_user_page microblaze: Remove "cache" optimized copy_page function microblaze: invoke oom-killer from page fault microblaze: fix divide by zero exception message microblaze: Add isa_dma_bridge_buggy to dma.h microblaze: Remove ancient code microblaze: Quiet section mismatch warnings for MMU version microblaze: Quiet section mismatch warnings microblaze: Fix IRQ entry/exit ftracing microblaze: resource/PCI: align functions now return start of resource microblaze: PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refs
2010-05-06Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds17-137/+156
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa/colibri: fix missing #include <mach/mfp.h> in colibri.h [ARM] pxa/spitz: fix On/off key name to fix warning during boot [ARM] pxa: fix the incorrect cpu_is_pxa950() [ARM] pxa: update cpuid pattern for pxa9xx in head.S [ARM] pxa/viper: fix timeout usage for I2C [ARM] pxa/raumfeld: fix button name [ARM] pxa/imote2: Fix iMote2 defconfig [ARM] pxa: add missing new line to regs-u2d.h ARM: 6093/1: Fix kernel memory printing for sparsemem arch/arm/include/asm/elf.h: forward-declare the task-struct arch/arm/plat-pxa/dma.c: correct NULL test ARM: 6076/1: SA1100: add processor check to sa1110-cpufreq driver ARM: 6075/1: SA1100: fix wrong CPU type for h3100 and h3600 ARM: Update mach-types ARM: 6066/1: Fix "BUG: scheduling while atomic: swapper/0/0x00000002 ARM: 6068/1: Fix build break with KPROBES enabled mx5: Fix build error for mx51_defconfig
2010-05-06Merge branch 'sh/for-2.6.34' of ↵Linus Torvalds6-25/+40
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6 * 'sh/for-2.6.34' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: sh: fix a number of Oopses and leaks in SH framebuffer driver SH: fix error paths in DMA driver sh: sh7751 pci controller io port fix sh: Fix maximum number of SCIF ports in R2D defconfigs SH: fix TS field shift calculation for DMA drivers
2010-05-06phy: Fix initialization in micrel driver.David S. Miller1-0/+1
Missing name string in ks8001_driver, so we crash on register. Reported-by: Ingo Molnar <[email protected]> Tested-by: Ingo Molnar <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2010-05-06microblaze: Defconfig updateMichal Simek2-13/+84
Signed-off-by: Michal Simek <[email protected]>
2010-05-06microblaze: Optimize CACHE_LOOP_LIMITS and CACHE_RANGE_LOOP macrosMichal Simek1-27/+35
1. Remove CACHE_ALL_LOOP2 macro because it is identical to CACHE_ALL_LOOP 2. Change BUG_ON to WARN_ON 3. Remove end aligned from CACHE_LOOP_LIMITS. C implementation do not need aligned end address and ASM code do aligned in their macros 4. ASM optimized CACHE_RANGE_LOOP_1/2 macros needs to get aligned end address. Because end address is compound from start + size, end address is the first address which is exclude. Here is the corresponding code which describe it. + int align = ~(line_length - 1); + end = ((end & align) == end) ? end - line_length : end & align; a) end is aligned: it is necessary to subtruct line length because we don't want to work with next cacheline b) end address is not aligned: Just align it to be ready for ASM code. Signed-off-by: Michal Simek <[email protected]>
2010-05-06microblaze: Fix consistent-sync codeMichal Simek1-1/+1
PCI_DMA_FROMDEVICE should call invalidation not flushing. Signed-off-by: Michal Simek <[email protected]>
2010-05-06microblaze: Define correct L1_CACHE_SHIFT valueMichal Simek1-1/+1
Microblaze cacheline length is configurable and current cpu uses two cacheline length 4 and 8. We are taking conservative maximum value to be sure that cacheline alignment is satisfied for all cases. Here is the calculation for cacheline lenght 8 32bit=4Byte values which is corresponding with SHIFT 5. Signed-off-by: Michal Simek <[email protected]>
2010-05-06microblaze: cpuinfo shows cache line lengthMichal Simek1-4/+6
Show cache line length in /proc/cpuinfo. Signed-off-by: Michal Simek <[email protected]>
2010-05-06microblaze: Fix kmalloc alignment on non-coherent DMA platformsMichal Simek1-0/+3
Based on PowerPC patche 52142e756e9bf6485d3d53596e8aff2e816a7253 PowerPC description: On platforms doing non-coherent DMA (4xx, 8xx, ...), it's important that the kmalloc minimum alignment is set to the cache line size, to avoid sharing cache lines between different objects, so that DMA to one of the objects doesn't corrupt the other. Signed-off-by: Michal Simek <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.