| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
pcf85063_clkout_control reads the wrong register but then update the
correct one.
Reported-by: Janne Terho <[email protected]>
Fixes: 8c229ab6048b ("rtc: pcf85063: Add pcf85063 clkout control to common clock framework")
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
rx6110_spi_of_match is not used when !OF, leading to a warning:
>> drivers/rtc/rtc-rx6110.c:384:34: warning: 'rx6110_spi_of_match' defined but not used [-Wunused-const-variable=]
384 | static const struct of_device_id rx6110_spi_of_match[] = {
| ^~~~~~~~~~~~~~~~~~~
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Reduce usage of 'struct rk808' (driver data of the parent MFD), so
that only the chip variant field is still being accessed directly.
This allows restructuring the MFD driver to support SPI based
PMICs.
Acked-by: Alexandre Belloni <[email protected]>
Signed-off-by: Sebastian Reichel <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed.
msc313_rtc_probe() was passing clk_disable_unprepare() directly, which
did not have matching prototypes for devm_add_action_or_reset()'s
callback argument. Refactor to use devm_clk_get_enabled() instead.
This was found as a result of Clang's new -Wcast-function-type-strict
flag, which is more sensitive than the simpler -Wcast-function-type,
which only checks for type width mismatches.
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Suggested-by: Christophe JAILLET <[email protected]>
Cc: Daniel Palmer <[email protected]>
Cc: Romain Perier <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Cc: Alexandre Belloni <[email protected]>
Cc: [email protected]
Cc: [email protected]
Signed-off-by: Kees Cook <[email protected]>
Reviewed-by: Daniel Palmer <[email protected]>
Tested-by: Daniel Palmer <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Convert the Amlogic Meson6 RTC bindings to dt-schema.
Signed-off-by: Neil Armstrong <[email protected]>
Reviewed-by: Martin Blumenstingl <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/20221117-b4-amlogic-bindings-convert-v1-6-3f025599b968@linaro.org
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
The pic32_rtc_enable(pdata, 0) and clk_disable_unprepare(pdata->clk)
should be called in the error handling of devm_rtc_allocate_device(),
so we should move devm_rtc_allocate_device earlier in pic32_rtc_probe()
to fix it.
Fixes: 6515e23b9fde ("rtc: pic32: convert to devm_rtc_allocate_device")
Signed-off-by: Gaosheng Cui <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
The clk_disable_unprepare() should be called in the error handling
of clk_get_rate(), fix it.
Fixes: b5b2bdfc2893 ("rtc: st: Add new driver for ST's LPC RTC")
Signed-off-by: Gaosheng Cui <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
If the alarms are disabled the topmost bit (AEN_*) is set in the alarm
registers. This is also interpreted in BCD number leading to this warning:
rtc rtc0: invalid alarm value: 2022-09-21T80:80:80
Fix this by masking alarm enabling and reserved bits.
Fixes: 05cb3a56ee8c ("rtc: pcf85063: add alarm support")
Signed-off-by: Alexander Stein <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Bugfix for an issue detected when a goldcap capacitor gets
fully discharged due to a long absence of the power supply,
and then recharges again. The RTC failed to continue to keep
the real-time clock.
This was caused by the incorrect handling of the STOP bit in
the RTC internal register. This fix solves the problem.
Signed-off-by: paulmn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Add wakeup support for rtc-efi, so we can wakeup from S3/S4/S5 through
rtcwake.
Signed-off-by: Riwen Lu <[email protected]>
Link: https://lore.kernel.org/r/TYWP286MB260191455377CEBD2336557EB1659@TYWP286MB2601.JPNP286.PROD.OUTLOOK.COM
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
If there is no IRQ hooked up, clear RTC_FEATURE_ALARM to make the core
ensure that userspace is made aware that alarms are not supported.
Signed-off-by: Vincent Whitchurch <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
On an iMX6ULL the following message appears when a wakealarm is set:
echo 0 > /sys/class/rtc/rtc1/wakealarm
rtc rtc1: Timeout trying to get valid LPSRT Counter read
This does not always happen but is reproducible quite often (7 out of 10
times). The problem appears because the iMX6ULL is not able to read the
registers within one 32kHz clock cycle which is the base clock of the
RTC. Therefore, this patch allows a difference of up to 320 cycles
(10ms). 10ms was chosen to be big enough even on systems with less cpu
power (e.g. iMX6ULL). According to the reference manual a difference is
fine:
- If the two consecutive reads are similar, the value is correct.
The values have to be similar, not equal.
Fixes: cd7f3a249dbe ("rtc: snvs: Add timeouts to avoid kernel lockups")
Reviewed-by: Francesco Dolcini <[email protected]>
Signed-off-by: Stefan Eichenberger <[email protected]>
Signed-off-by: Francesco Dolcini <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Make cmos_do_remove() drop the ACPI RTC fixed event handler so as to
prevent it from operating on stale data in case the event triggers
after driver removal.
Fixes: 311ee9c151ad ("rtc: cmos: allow using ACPI for RTC alarm instead of HPET")
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Tested-by: Zhang Rui <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/2224609.iZASKD2KPV@kreacher
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
The names of rtc_wake_setup() and cmos_wake_setup() don't indicate
that these functions are ACPI-related, which is the case, and the
former doesn't really reflect the role of the function.
Rename them to acpi_rtc_event_setup() and acpi_cmos_wake_setup(),
respectively, to address this shortcoming.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Tested-by: Zhang Rui <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/3225614.44csPzL39Z@kreacher
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Reorder the ACPI-related code before cmos_do_probe() so as to eliminate
excessive forward declarations of some functions.
While at it, for consistency, add the inline modifier to the
definitions of empty stub static funtions and remove it from the
corresponding definitions of functions with non-empty bodies.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Tested-by: Zhang Rui <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/13157911.uLZWGnKmhe@kreacher
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
To reduce code duplication, move the invocation of rtc_wake_setup()
into cmos_do_probe() and simplify the callers of the latter.
No intentional functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Tested-by: Zhang Rui <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/2143522.irdbgypaU6@kreacher
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Notice that cmos_wake_setup() is the only user of acpi_rtc_info and it
can operate on the cmos_rtc variable directly, so it need not set the
platform_data pointer before cmos_do_probe() is called. Instead, it
can be called by cmos_do_probe() in the case when the platform_data
pointer is not set to implement the default behavior (which is to use
the FADT information as long as ACPI support is enabled).
Modify the code accordingly.
While at it, drop a comment that doesn't really match the code it is
supposed to be describing.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Zhang Rui <[email protected]>
Tested-by: Zhang Rui <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Link: https://lore.kernel.org/r/4803444.31r3eYUQgx@kreacher
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
devm_rtc_allocate_device() will alloc a rtc_device first, and then run
dev_set_name(). If dev_set_name() failed, the rtc_device will memleak.
Move devm_add_action_or_reset() in front of dev_set_name() to prevent
memleak.
unreferenced object 0xffff888110a53000 (size 2048):
comm "python3", pid 470, jiffies 4296078308 (age 58.882s)
hex dump (first 32 bytes):
00 00 00 00 00 00 00 00 08 30 a5 10 81 88 ff ff .........0......
08 30 a5 10 81 88 ff ff 00 00 00 00 00 00 00 00 .0..............
backtrace:
[<000000004aac0364>] kmalloc_trace+0x21/0x110
[<000000000ff02202>] devm_rtc_allocate_device+0xd4/0x400
[<000000001bdf5639>] devm_rtc_device_register+0x1a/0x80
[<00000000351bf81c>] rx4581_probe+0xdd/0x110 [rtc_rx4581]
[<00000000f0eba0ae>] spi_probe+0xde/0x130
[<00000000bff89ee8>] really_probe+0x175/0x3f0
[<00000000128e8d84>] __driver_probe_device+0xe6/0x170
[<00000000ee5bf913>] device_driver_attach+0x32/0x80
[<00000000f3f28f92>] bind_store+0x10b/0x1a0
[<000000009ff812d8>] drv_attr_store+0x49/0x70
[<000000008139c323>] sysfs_kf_write+0x8d/0xb0
[<00000000b6146e01>] kernfs_fop_write_iter+0x214/0x2d0
[<00000000ecbe3895>] vfs_write+0x61a/0x7d0
[<00000000aa2196ea>] ksys_write+0xc8/0x190
[<0000000046a600f5>] do_syscall_64+0x37/0x90
[<00000000541a336f>] entry_SYSCALL_64_after_hwframe+0x63/0xcd
Fixes: 24d23181e43d ("rtc: class: check return value when calling dev_set_name()")
Signed-off-by: Shang XiaoJing <[email protected]>
Reviewed-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
In `ds1347_set_time()`, the wrong value is being written to the
`DS1347_CENTURY_REG` register. It needs to be converted to BCD. Fix
it.
Fixes: 147dae76dbb9 ("rtc: ds1347: handle century register")
Cc: <[email protected]> # v5.5+
Signed-off-by: Ian Abbott <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
The kstrto<something>() functions have been moved from kernel.h to
kstrtox.h.
So, include the latter directly in the appropriate files.
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/786421fd0435a32206288904a1f879436a717529.1667721637.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
The isl12022 has built-in temperature compensation effective over the
range -40C to +85C. It exposes the average of the last two temperature
measurements as a 10-bit value in half-Kelvins. Make this available
via the hwmon framework.
Reviewed-by: Guenter Roeck <[email protected]>
Signed-off-by: Rasmus Villemoes <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Return the value s35390a_set_reg() directly instead of storing it in
another redundant variable.
Reported-by: Zeal Robot <[email protected]>
Signed-off-by: ye xingchen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Convert RTC binding for Haoyu Microelectronics HYM8563 to Device Tree
Schema format.
Signed-off-by: Sebastian Reichel <[email protected]>
Reviewed-by: Heiko Stuebner <[email protected]>
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
The ftm_rtc_driver has been registered while module init, however there
is not unregister step for module exit, now use the macro
module_platform_driver replace device_initcall, which can register and
unregister platform driver automatically.
Signed-off-by: Zhang Jianhua <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
The Davinci dm365 SoC support was removed, so the rtc driver
has no remaining users.
Signed-off-by: Arnd Bergmann <[email protected]>
Acked-by: Bartosz Golaszewski <[email protected]>
Acked-by: Marc Zyngier <[email protected]>
Acked-by: Kevin Hilman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
In the probe path, dev_err() can be replace with dev_err_probe()
which will check if error code is -EPROBE_DEFER and prints the
error name.
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Remove unnecessary spi_set_drvdata() in ds1302_remove(), the driver_data
will be set to NULL in device_unbind_cleanup() after calling ->remove().
After this, ds1302_remove() is an empty function, so remove it too.
Signed-off-by: Yang Yingliang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
RTC chips on some older Chromebooks can only handle alarms less than 24
hours in the future. Attempts to set an alarm beyond that range fails.
The most severe impact of this limitation is that suspend requests fail
if alarmtimer_suspend() tries to set an alarm for more than 24 hours
in the future.
Try to set the real-time alarm to just below 24 hours if setting it to
a larger value fails to work around the problem. While not perfect, it
is better than just failing the call. A similar workaround is already
implemented in the rtc-tps6586x driver.
Drop error messages in cros_ec_rtc_get() and cros_ec_rtc_set() since the
calling code also logs an error and to avoid spurious error messages if
setting the alarm ultimately succeeds.
Cc: Brian Norris <[email protected]>
Signed-off-by: Guenter Roeck <[email protected]>
Commit: Guenter Roeck <[email protected]>
Reviewed-by: Tzung-Bi Shih <[email protected]>
Reviewed-by: Brian Norris <[email protected]>
Tested-by: Brian Norris <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
The PM8018 compatible is always used with PM8921 fallback, so PM8018
compatible can be safely removed from device ID table
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
qcom,pm8018-rtc
The PM8018 RTC is used as compatible with PM8921 RTC on the MDM9615,
document this situation.
Reviewed-by: Krzysztof Kozlowski <[email protected]>
Signed-off-by: Neil Armstrong <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
The rzn1_rtc_probe() function utilizes devm_pm_runtime_enable()
but wasn't checking the return value. Fix it by adding missing
check.
Fixes: deeb4b5393e1 ("rtc: rzn1: Add new RTC driver")
Signed-off-by: Yushan Zhou <[email protected]>
Reviewed-by: Miquel Raynal <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in .probe().
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in .probe(). The device_id array has to move up for that
to work.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in .probe().
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in .probe(). The device_id array has to move up for that
to work.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in .probe().
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in .probe().
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in .probe(). The device_id array has to move up for that
to work.
Signed-off-by: Uwe Kleine-König <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Now that rtc_wake_setup is called outside of cmos_wake_setup, it also need
to be defined on non-ACPI platforms.
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
Commit 4919d3eb2ec0 ("rtc: cmos: Fix event handler registration
ordering issue") overlooked the fact that cmos_do_probe() depended
on the preparations carried out by cmos_wake_setup() and the wake
alarm stopped working after the ordering of them had been changed.
Address this by partially reverting commit 4919d3eb2ec0 so that
cmos_wake_setup() is called before cmos_do_probe() again and moving
the rtc_wake_setup() invocation from cmos_wake_setup() directly to the
callers of cmos_do_probe() where it will happen after a successful
completion of the latter.
Fixes: 4919d3eb2ec0 ("rtc: cmos: Fix event handler registration ordering issue")
Reported-by: Zhang Rui <[email protected]>
Reported-by: Todd Brandt <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Link: https://lore.kernel.org/r/5887691.lOV4Wx5bFT@kreacher
Signed-off-by: Alexandre Belloni <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/crng/random
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels
when using bperf (perf BPF based counters) with cgroups.
- Support HiSilicon PCIe Performance Monitoring Unit (PMU), that
monitors bandwidth, latency, bus utilization and buffer occupancy.
Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst.
- User space tasks can migrate between CPUs, so when tracing selected
CPUs, system-wide sideband is still needed, fix it in the setup of
Intel PT on hybrid systems.
- Fix metricgroups title message in 'perf list', it should state that
the metrics groups are to be used with the '-M' option, not '-e'.
- Sync the msr-index.h copy with the kernel sources, adding support for
using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well
as decoding it when printing the MSR tracepoint arguments.
- Fix program header size and alignment when generating a JIT ELF in
'perf inject'.
- Add multiple new Intel PT 'perf test' entries, including a jitdump
one.
- Fix the 'perf test' entries for 'perf stat' CSV and JSON output when
running on PowerPC due to an invalid topology number in that arch.
- Fix the 'perf test' for arm_coresight failures on the ARM Juno
system.
- Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this
option to the or expression expected in the intercepted
perf_event_open() syscall.
- Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the
'perf annotate' asm parser.
- Fix 'perf mem record -C' option processing, it was being chopped up
when preparing the underlying 'perf record -e mem-events' and thus
being ignored, requiring using '-- -C CPUs' as a workaround.
- Improvements and tidy ups for 'perf test' shell infra.
- Fix Intel PT information printing segfault in uClibc, where a NULL
format was being passed to fprintf.
* tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits)
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet
perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver
perf auxtrace arm: Refactor event list iteration in auxtrace_record__init()
perf tests stat+json_output: Include sanity check for topology
perf tests stat+csv_output: Include sanity check for topology
perf intel-pt: Fix system_wide dummy event for hybrid
perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
perf test: Fix attr tests for PERF_FORMAT_LOST
perf test: test_intel_pt.sh: Add 9 tests
perf inject: Fix GEN_ELF_TEXT_OFFSET for jit
perf test: test_intel_pt.sh: Add jitdump test
perf test: test_intel_pt.sh: Tidy some alignment
perf test: test_intel_pt.sh: Print a message when skipping kernel tracing
perf test: test_intel_pt.sh: Tidy some perf record options
perf test: test_intel_pt.sh: Fix return checking again
perf: Skip and warn on unknown format 'configN' attrs
perf list: Fix metricgroups title message
perf mem: Fix -C option behavior for perf mem record
perf annotate: Add missing condition flags for arm64
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the
combination of Clang >= 14 and GAS <= 2.35.
- Drop vmlinux.bz2 from the rpm package as it just annoyingly increased
the package size.
- Fix modpost error under build environments using musl.
- Make *.ll files keep value names for easier debugging
- Fix single directory build
- Prevent RISC-V from selecting the broken DWARF5 support when Clang
and GAS are used together.
* tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5
kbuild: fix single directory build
kbuild: add -fno-discard-value-names to cmd_cc_ll_c
scripts/clang-tools: Convert clang-tidy args to list
modpost: put modpost options before argument
kbuild: Stop including vmlinux.bz2 in the rpm's
Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull more clk updates from Stephen Boyd:
"This is the final part of the clk patches for this merge window.
The clk rate range series needed another week to fully bake. Maxime
fixed the bug that broke clk notifiers and prevented this from being
included in the first pull request. He also added a unit test on top
to make sure it doesn't break so easily again. The majority of the
series fixes up how the clk_set_rate_*() APIs work, particularly
around when the rate constraints are dropped and how they move around
when reparenting clks. Overall it's a much needed improvement to the
clk rate range APIs that used to be pretty broken if you looked
sideways.
Beyond the core changes there are a few driver fixes for a compilation
issue or improper data causing clks to fail to register or have the
wrong parents. These are good to get in before the first -rc so that
the system actually boots on the affected devices"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (31 commits)
clk: tegra: Fix Tegra PWM parent clock
clk: at91: fix the build with binutils 2.27
clk: qcom: gcc-msm8660: Drop hardcoded fixed board clocks
clk: mediatek: clk-mux: Add .determine_rate() callback
clk: tests: Add tests for notifiers
clk: Update req_rate on __clk_recalc_rates()
clk: tests: Add missing test case for ranges
clk: qcom: clk-rcg2: Take clock boundaries into consideration for gfx3d
clk: Introduce the clk_hw_get_rate_range function
clk: Zero the clk_rate_request structure
clk: Stop forwarding clk_rate_requests to the parent
clk: Constify clk_has_parent()
clk: Introduce clk_core_has_parent()
clk: Switch from __clk_determine_rate to clk_core_round_rate_nolock
clk: Add our request boundaries in clk_core_init_rate_req
clk: Introduce clk_hw_init_rate_request()
clk: Move clk_core_init_rate_req() from clk_core_round_rate_nolock() to its caller
clk: Change clk_core_init_rate_req prototype
clk: Set req_rate on reparenting
clk: Take into account uncached clocks in clk_set_rate_range()
...
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull more cifs updates from Steve French:
- fix a regression in guest mounts to old servers
- improvements to directory leasing (caching directory entries safely
beyond the root directory)
- symlink improvement (reducing roundtrips needed to process symlinks)
- an lseek fix (to problem where some dir entries could be skipped)
- improved ioctl for returning more detailed information on directory
change notifications
- clarify multichannel interface query warning
- cleanup fix (for better aligning buffers using ALIGN and round_up)
- a compounding fix
- fix some uninitialized variable bugs found by Coverity and the kernel
test robot
* tag '6.1-rc-smb3-client-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
smb3: improve SMB3 change notification support
cifs: lease key is uninitialized in two additional functions when smb1
cifs: lease key is uninitialized in smb1 paths
smb3: must initialize two ACL struct fields to zero
cifs: fix double-fault crash during ntlmssp
cifs: fix static checker warning
cifs: use ALIGN() and round_up() macros
cifs: find and use the dentry for cached non-root directories also
cifs: enable caching of directories for which a lease is held
cifs: prevent copying past input buffer boundaries
cifs: fix uninitialised var in smb2_compound_op()
cifs: improve symlink handling for smb2+
smb3: clarify multichannel warning
cifs: fix regression in very old smb1 mounts
cifs: fix skipping to incorrect offset in emit_cached_dirents
|
|
This reverts commit 78e5a3399421 ("cpumask: fix checking valid cpu range").
syzbot is hitting WARN_ON_ONCE(cpu >= nr_cpumask_bits) warning at
cpu_max_bits_warn() [1], for commit 78e5a3399421 ("cpumask: fix checking
valid cpu range") is broken. Obviously that patch hits WARN_ON_ONCE()
when e.g. reading /proc/cpuinfo because passing "cpu + 1" instead of
"cpu" will trivially hit cpu == nr_cpumask_bits condition.
Although syzbot found this problem in linux-next.git on 2022/09/27 [2],
this problem was not fixed immediately. As a result, that patch was
sent to linux.git before the patch author recognizes this problem, and
syzbot started failing to test changes in linux.git since 2022/10/10
[3].
Andrew Jones proposed a fix for x86 and riscv architectures [4]. But
[2] and [5] indicate that affected locations are not limited to arch
code. More delay before we find and fix affected locations, less tested
kernel (and more difficult to bisect and fix) before release.
We should have inspected and fixed basically all cpumask users before
applying that patch. We should not crash kernels in order to ask
existing cpumask users to update their code, even if limited to
CONFIG_DEBUG_PER_CPU_MAPS=y case.
Link: https://syzkaller.appspot.com/bug?extid=d0fd2bf0dd6da72496dd [1]
Link: https://syzkaller.appspot.com/bug?extid=21da700f3c9f0bc40150 [2]
Link: https://syzkaller.appspot.com/bug?extid=51a652e2d24d53e75734 [3]
Link: https://lkml.kernel.org/r/[email protected] [4]
Link: https://syzkaller.appspot.com/bug?extid=4d46c43d81c3bd155060 [5]
Reported-by: Andrew Jones <[email protected]>
Reported-by: [email protected]
Signed-off-by: Tetsuo Handa <[email protected]>
Cc: Yury Norov <[email protected]>
Cc: Borislav Petkov <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
When building with a RISC-V kernel with DWARF5 debug info using clang
and the GNU assembler, several instances of the following error appear:
/tmp/vgettimeofday-48aa35.s:2963: Error: non-constant .uleb128 is not supported
Dumping the .s file reveals these .uleb128 directives come from
.debug_loc and .debug_ranges:
.Ldebug_loc0:
.byte 4 # DW_LLE_offset_pair
.uleb128 .Lfunc_begin0-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp1-.Lfunc_begin0 # ending offset
.byte 1 # Loc expr size
.byte 90 # DW_OP_reg10
.byte 0 # DW_LLE_end_of_list
.Ldebug_ranges0:
.byte 4 # DW_RLE_offset_pair
.uleb128 .Ltmp6-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp27-.Lfunc_begin0 # ending offset
.byte 4 # DW_RLE_offset_pair
.uleb128 .Ltmp28-.Lfunc_begin0 # starting offset
.uleb128 .Ltmp30-.Lfunc_begin0 # ending offset
.byte 0 # DW_RLE_end_of_list
There is an outstanding binutils issue to support a non-constant operand
to .sleb128 and .uleb128 in GAS for RISC-V but there does not appear to
be any movement on it, due to concerns over how it would work with
linker relaxation.
To avoid these build errors, prevent DWARF5 from being selected when
using clang and an assembler that does not have support for these symbol
deltas, which can be easily checked in Kconfig with as-instr plus the
small test program from the dwz test suite from the binutils issue.
Link: https://sourceware.org/bugzilla/show_bug.cgi?id=27215
Link: https://github.com/ClangBuiltLinux/linux/issues/1719
Signed-off-by: Nathan Chancellor <[email protected]>
Reviewed-by: Nick Desaulniers <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
|
|
Commit f110e5a250e3 ("kbuild: refactor single builds of *.ko") was wrong.
KBUILD_MODULES _is_ needed for single builds.
Otherwise, "make foo/bar/baz/" does not build module objects at all.
Fixes: f110e5a250e3 ("kbuild: refactor single builds of *.ko")
Reported-by: David Sterba <[email protected]>
Signed-off-by: Masahiro Yamada <[email protected]>
Tested-by: David Sterba <[email protected]>
|