aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-07-30ixgbe: use generic power managementVaibhav Gupta1-46/+15
With legacy PM hooks, it was the responsibility of a driver to manage PCI states and also the device's power state. The generic approach is to let PCI core handle the work. ixgbe_suspend() calls __ixgbe_shutdown() to perform intermediate tasks. __ixgbe_shutdown() modifies the value of "wake" (device should be wakeup enabled or not), responsible for controlling the flow of legacy PM. Since, PCI core has no idea about the value of "wake", new code for generic PM may produce unexpected results. Thus, use "device_set_wakeup_enable()" to wakeup-enable the device accordingly. Compile-tested only. Signed-off-by: Vaibhav Gupta <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-30igbvf: use generic power managementVaibhav Gupta1-29/+8
Remove legacy PM callbacks and use generic operations. With legacy code, drivers were responsible for handling PCI PM operations like pci_save_state(). In generic code, all these are handled by PCI core. The generic suspend() and resume() are called at the same point the legacy ones were called. Thus, it does not affect the normal functioning of the driver. __maybe_unused attribute is used with .resume() but not with .suspend(), as .suspend() is called by .shutdown(). Compile-tested only. Signed-off-by: Vaibhav Gupta <[email protected]> Tested-by: Aaron Brown <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-30iavf: use generic power managementVaibhav Gupta1-33/+12
With the support of generic PM callbacks, drivers no longer need to use legacy .suspend() and .resume() in which they had to maintain PCI states changes and device's power state themselves. The required operations are done by PCI core. PCI drivers are not expected to invoke PCI helper functions like pci_save/restore_state(), pci_enable/disable_device(), pci_set_power_state(), etc. Their tasks are completed by PCI core itself. Compile-tested only. Signed-off-by: Vaibhav Gupta <[email protected]> Tested-by: Andrew Bowers <[email protected]> Signed-off-by: Tony Nguyen <[email protected]>
2020-07-30virtio-mem: Fix build error due to improper use 'select'Weilong Chen1-1/+1
As noted in: https://www.kernel.org/doc/Documentation/kbuild/kconfig-language.txt "select should be used with care. select will force a symbol to a value without visiting the dependencies." Config VIRTIO_MEM should not select CONTIG_ALLOC directly. Otherwise it will cause an error: https://bugzilla.kernel.org/show_bug.cgi?id=208245 Signed-off-by: Weilong Chen <[email protected]> Link: https://lore.kernel.org/r/[email protected] Acked-by: Randy Dunlap <[email protected]> # build-tested Signed-off-by: Michael S. Tsirkin <[email protected]> Acked-by: Jason Wang <[email protected]> Acked-by: David Hildenbrand <[email protected]>
2020-07-30Revert "drm/amdgpu: Fix NULL dereference in dpm sysfs handlers"Alex Deucher1-3/+6
This regressed some working configurations so revert it. Will fix this properly for 5.9 and backport then. This reverts commit 38e0c89a19fd13f28d2b4721035160a3e66e270b. Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-07-30drm/amd/display: Clear dm_state for fast updatesMazin Rezk1-9/+27
This patch fixes a race condition that causes a use-after-free during amdgpu_dm_atomic_commit_tail. This can occur when 2 non-blocking commits are requested and the second one finishes before the first. Essentially, this bug occurs when the following sequence of events happens: 1. Non-blocking commit #1 is requested w/ a new dm_state #1 and is deferred to the workqueue. 2. Non-blocking commit #2 is requested w/ a new dm_state #2 and is deferred to the workqueue. 3. Commit #2 starts before commit #1, dm_state #1 is used in the commit_tail and commit #2 completes, freeing dm_state #1. 4. Commit #1 starts after commit #2 completes, uses the freed dm_state 1 and dereferences a freelist pointer while setting the context. Since this bug has only been spotted with fast commits, this patch fixes the bug by clearing the dm_state instead of using the old dc_state for fast updates. In addition, since dm_state is only used for its dc_state and amdgpu_dm_atomic_commit_tail will retain the dc_state if none is found, removing the dm_state should not have any consequences in fast updates. This use-after-free bug has existed for a while now, but only caused a noticeable issue starting from 5.7-rc1 due to 3202fa62f ("slub: relocate freelist pointer to middle of object") moving the freelist pointer from dm_state->base (which was unused) to dm_state->context (which is dereferenced). Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=207383 Fixes: bd200d190f45 ("drm/amd/display: Don't replace the dc_state for fast updates") Reported-by: Duncan <[email protected]> Signed-off-by: Mazin Rezk <[email protected]> Reviewed-by: Nicholas Kazlauskas <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2020-07-30drm/amdgpu: Prevent kernel-infoleak in amdgpu_info_ioctl()Peilin Ye1-1/+2
Compiler leaves a 4-byte hole near the end of `dev_info`, causing amdgpu_info_ioctl() to copy uninitialized kernel stack memory to userspace when `size` is greater than 356. In 2015 we tried to fix this issue by doing `= {};` on `dev_info`, which unfortunately does not initialize that 4-byte hole. Fix it by using memset() instead. Cc: [email protected] Fixes: c193fa91b918 ("drm/amdgpu: information leak in amdgpu_info_ioctl()") Fixes: d38ceaf99ed0 ("drm/amdgpu: add core driver (v4)") Suggested-by: Dan Carpenter <[email protected]> Reviewed-by: Christian König <[email protected]> Signed-off-by: Peilin Ye <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2020-07-30RDMA/core: Free DIM memory in error unwindLeon Romanovsky1-0/+1
The memory allocated for the DIM wasn't freed in in error unwind path, fix it by calling to rdma_dim_destroy(). Fixes: da6629793aa6 ("RDMA/core: Provide RDMA DIM support for ULPs") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Leon Romanovsky <[email protected]> Reviewed-by: Max Gurtovoy <[email protected] <mailto:[email protected]>> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-30RDMA/core: Stop DIM before destroying CQLeon Romanovsky1-3/+10
HW destroy operation should be last operation after all possible CQ users completed their work, so move DIM work cancellation before such destroy call. Fixes: da6629793aa6 ("RDMA/core: Provide RDMA DIM support for ULPs") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Max Gurtovoy <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-30RDMA/mlx5: Initialize QP mutex for the debug kernelsLeon Romanovsky1-4/+1
In DCT and RSS RAW QP creation flows, the QP mutex wasn't initialized and the magic field inside lock was missing. This caused to the following kernel warning for kernels build with CONFIG_DEBUG_MUTEXES. DEBUG_LOCKS_WARN_ON(lock->magic != lock) WARNING: CPU: 3 PID: 16261 at kernel/locking/mutex.c:938 __mutex_lock+0x60e/0x940 Modules linked in: bonding nf_tables ipip tunnel4 geneve ip6_udp_tunnel udp_tunnel ip6_gre ip6_tunnel tunnel6 ip_gre gre ip_tunnel mlx5_ib mlx5_core mlxfw ptp pps_core rdma_ucm ib_uverbs ib_ipoib ib_umad openvswitch nsh xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat xt_addrtype xt_conntrack nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 br_netfilter overlay ib_srp scsi_transport_srp rpcrdma ib_iser libiscsi scsi_transport_iscsi rdma_cm iw_cm ib_cm ib_core [last unloaded: mlxfw] CPU: 3 PID: 16261 Comm: ib_send_bw Not tainted 5.8.0-rc4_for_upstream_min_debug_2020_07_08_22_04 #1 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 RIP: 0010:__mutex_lock+0x60e/0x940 Code: c0 0f 84 6d fa ff ff 44 8b 15 4e 9d ba 00 45 85 d2 0f 85 5d fa ff ff 48 c7 c6 f2 de 2b 82 48 c7 c7 f1 8a 2b 82 e8 d2 4d 72 ff <0f> 0b 4c 8b 4d 88 e9 3f fa ff ff f6 c2 04 0f 84 37 fe ff ff 48 89 RSP: 0018:ffff88810bb8b870 EFLAGS: 00010286 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff88829f1dd880 RSI: 0000000000000000 RDI: ffffffff81192afa RBP: ffff88810bb8b910 R08: 0000000000000000 R09: 0000000000000028 R10: 0000000000000000 R11: 0000000000003f85 R12: 0000000000000002 R13: ffff88827d8d3ce0 R14: ffffffffa059f615 R15: ffff8882a4d02610 FS: 00007f3f6988e740(0000) GS:ffff8882f5b80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000556556158000 CR3: 000000010a63c005 CR4: 0000000000360ea0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: ? cmd_exec+0x947/0xe60 [mlx5_core] ? __mutex_lock+0x76/0x940 ? mlx5_ib_qp_set_counter+0x25/0xa0 [mlx5_ib] mlx5_ib_qp_set_counter+0x25/0xa0 [mlx5_ib] mlx5_ib_counter_bind_qp+0x9b/0xe0 [mlx5_ib] __rdma_counter_bind_qp+0x6b/0xa0 [ib_core] rdma_counter_bind_qp_auto+0x363/0x520 [ib_core] _ib_modify_qp+0x316/0x580 [ib_core] ib_modify_qp_with_udata+0x19/0x30 [ib_core] modify_qp+0x4c4/0x600 [ib_uverbs] ib_uverbs_ex_modify_qp+0x87/0xe0 [ib_uverbs] ib_uverbs_handler_UVERBS_METHOD_INVOKE_WRITE+0x129/0x1c0 [ib_uverbs] ib_uverbs_cmd_verbs.isra.5+0x5d5/0x11f0 [ib_uverbs] ? ib_uverbs_handler_UVERBS_METHOD_QUERY_CONTEXT+0x120/0x120 [ib_uverbs] ? lock_acquire+0xb9/0x3a0 ? ib_uverbs_ioctl+0xd0/0x210 [ib_uverbs] ? ib_uverbs_ioctl+0x175/0x210 [ib_uverbs] ib_uverbs_ioctl+0x14b/0x210 [ib_uverbs] ? ib_uverbs_ioctl+0xd0/0x210 [ib_uverbs] ksys_ioctl+0x234/0x7d0 ? exc_page_fault+0x202/0x640 ? do_syscall_64+0x1f/0x2e0 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x59/0x2e0 ? asm_exc_page_fault+0x8/0x30 ? rcu_read_lock_sched_held+0x52/0x60 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: b4aaa1f0b415 ("IB/mlx5: Handle type IB_QPT_DRIVER when creating a QP") Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Maor Gottlieb <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-30Revert "Bluetooth: btusb: Disable runtime suspend on Realtek devices"Abhishek Pandit-Subedi1-4/+0
This reverts commit 7ecacafc240638148567742cca41aa7144b4fe1e. Testing this change on a board with RTL8822CE, I found that enabling autosuspend has no effect on the stability of the system. The board continued working after autosuspend, suspend and reboot. The original commit makes it impossible to enable autosuspend on working systems so it should be reverted. Disabling autosuspend should be done via module param or udev in userspace instead. Signed-off-by: Abhishek Pandit-Subedi <[email protected]> Acked-by: Kai-Heng Feng <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2020-07-30Bluetooth: Enable controller RPA resolution using Experimental featureSathish Narasimman4-3/+148
This patch adds support to enable the use of RPA Address resolution using expermental feature mgmt command. Signed-off-by: Sathish Narasimman <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2020-07-30mac80211: remove STA txq pending airtime underflow warningFelix Fietkau1-3/+1
This warning can trigger if there is a mismatch between frames that were sent with the sta pointer set vs tx status frames reported for the sta address. This can happen due to race conditions on re-creating stations, or even in the case of .sta_add/remove being used instead of .sta_state, which can cause frames to be sent to a station that has not been uploaded yet. If there is an actual underflow issue, it should show up in the device airtime warning below, so it is better to remove this one. Signed-off-by: Felix Fietkau <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-07-30mac80211: Fix bug in Tx ack status reporting in 802.3 xmit pathVasanthakumar Thiagarajan1-3/+4
Allocated ack_frame id from local->ack_status_frames is not really stored in the tx_info for 802.3 Tx path. Due to this, tx ack status is not reported and ack_frame id is not freed for the buffers requiring tx ack status. Also move the memset to 0 of tx_info before IEEE80211_TX_CTL_REQ_TX_STATUS flag assignment. Fixes: 50ff477a8639 ("mac80211: add 802.11 encapsulation offloading support") Signed-off-by: Vasanthakumar Thiagarajan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-07-30cfg80211: check vendor command doit pointer before useJulian Squires1-3/+3
In the case where a vendor command does not implement doit, and has no flags set, doit would not be validated and a NULL pointer dereference would occur, for example when invoking the vendor command via iw. I encountered this while developing new vendor commands. Perhaps in practice it is advisable to always implement doit along with dumpit, but it seems reasonable to me to always check doit anyway, not just when NEED_WDEV. Signed-off-by: Julian Squires <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-07-30mac80211: mesh: Free pending skb when destroying a mpathRemi Pommarel1-0/+1
A mpath object can hold reference on a list of skb that are waiting for mpath resolution to be sent. When destroying a mpath this skb list should be cleaned up in order to not leak memory. Fixing that kind of leak: unreferenced object 0xffff0000181c9300 (size 1088): comm "openvpn", pid 1782, jiffies 4295071698 (age 80.416s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 f9 80 36 00 00 00 00 00 ..........6..... 02 00 07 40 00 00 00 00 00 00 00 00 00 00 00 00 ...@............ backtrace: [<000000004bc6a443>] kmem_cache_alloc+0x1a4/0x2f0 [<000000002caaef13>] sk_prot_alloc.isra.39+0x34/0x178 [<00000000ceeaa916>] sk_alloc+0x34/0x228 [<00000000ca1f1d04>] inet_create+0x198/0x518 [<0000000035626b1c>] __sock_create+0x134/0x328 [<00000000a12b3a87>] __sys_socket+0xb0/0x158 [<00000000ff859f23>] __arm64_sys_socket+0x40/0x58 [<00000000263486ec>] el0_svc_handler+0xd0/0x1a0 [<0000000005b5157d>] el0_svc+0x8/0xc unreferenced object 0xffff000012973a40 (size 216): comm "openvpn", pid 1782, jiffies 4295082137 (age 38.660s) hex dump (first 32 bytes): 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ 00 c0 06 16 00 00 ff ff 00 93 1c 18 00 00 ff ff ................ backtrace: [<000000004bc6a443>] kmem_cache_alloc+0x1a4/0x2f0 [<0000000023c8c8f9>] __alloc_skb+0xc0/0x2b8 [<000000007ad950bb>] alloc_skb_with_frags+0x60/0x320 [<00000000ef90023a>] sock_alloc_send_pskb+0x388/0x3c0 [<00000000104fb1a3>] sock_alloc_send_skb+0x1c/0x28 [<000000006919d2dd>] __ip_append_data+0xba4/0x11f0 [<0000000083477587>] ip_make_skb+0x14c/0x1a8 [<0000000024f3d592>] udp_sendmsg+0xaf0/0xcf0 [<000000005aabe255>] inet_sendmsg+0x5c/0x80 [<000000008651ea08>] __sys_sendto+0x15c/0x218 [<000000003505c99b>] __arm64_sys_sendto+0x74/0x90 [<00000000263486ec>] el0_svc_handler+0xd0/0x1a0 [<0000000005b5157d>] el0_svc+0x8/0xc Fixes: 2bdaf386f99c (mac80211: mesh: move path tables into if_mesh) Signed-off-by: Remi Pommarel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-07-30mac80211: mesh: Free ie data when leaving meshRemi Pommarel1-0/+1
At ieee80211_join_mesh() some ie data could have been allocated (see copy_mesh_setup()) and need to be cleaned up when leaving the mesh. This fixes the following kmemleak report: unreferenced object 0xffff0000116bc600 (size 128): comm "wpa_supplicant", pid 608, jiffies 4294898983 (age 293.484s) hex dump (first 32 bytes): 30 14 01 00 00 0f ac 04 01 00 00 0f ac 04 01 00 0............... 00 0f ac 08 00 00 00 00 c4 65 40 00 00 00 00 00 .........e@..... backtrace: [<00000000bebe439d>] __kmalloc_track_caller+0x1c0/0x330 [<00000000a349dbe1>] kmemdup+0x28/0x50 [<0000000075d69baa>] ieee80211_join_mesh+0x6c/0x3b8 [mac80211] [<00000000683bb98b>] __cfg80211_join_mesh+0x1e8/0x4f0 [cfg80211] [<0000000072cb507f>] nl80211_join_mesh+0x520/0x6b8 [cfg80211] [<0000000077e9bcf9>] genl_family_rcv_msg+0x374/0x680 [<00000000b1bd936d>] genl_rcv_msg+0x78/0x108 [<0000000022c53788>] netlink_rcv_skb+0xb0/0x1c0 [<0000000011af8ec9>] genl_rcv+0x34/0x48 [<0000000069e41f53>] netlink_unicast+0x268/0x2e8 [<00000000a7517316>] netlink_sendmsg+0x320/0x4c0 [<0000000069cba205>] ____sys_sendmsg+0x354/0x3a0 [<00000000e06bab0f>] ___sys_sendmsg+0xd8/0x120 [<0000000037340728>] __sys_sendmsg+0xa4/0xf8 [<000000004fed9776>] __arm64_sys_sendmsg+0x44/0x58 [<000000001c1e5647>] el0_svc_handler+0xd0/0x1a0 Fixes: c80d545da3f7 (mac80211: Let userspace enable and configure vendor specific path selection.) Signed-off-by: Remi Pommarel <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-07-30mac80211: fix warning in 6 GHz IE addition in mesh modeRajkumar Manoharan2-0/+17
The commit 24a2042cb22f ("mac80211: add HE 6 GHz Band Capability element") failed to check device capability before adding HE 6 GHz capability element. Below warning is reported in 11ac device in mesh. Fix that by checking device capability at HE 6 GHz cap IE addition in mesh beacon and association request. WARNING: CPU: 1 PID: 1897 at net/mac80211/util.c:2878 ieee80211_ie_build_he_6ghz_cap+0x149/0x150 [mac80211] [ 3138.720358] Call Trace: [ 3138.720361] ieee80211_mesh_build_beacon+0x462/0x530 [mac80211] [ 3138.720363] ieee80211_start_mesh+0xa8/0xf0 [mac80211] [ 3138.720365] __cfg80211_join_mesh+0x122/0x3e0 [cfg80211] [ 3138.720368] nl80211_join_mesh+0x3d3/0x510 [cfg80211] Fixes: 24a2042cb22f ("mac80211: add HE 6 GHz Band Capability element") Reported-by: Markus Theil <[email protected]> Signed-off-by: Rajkumar Manoharan <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Johannes Berg <[email protected]>
2020-07-30ALSA: hda/realtek - Fixed HP right speaker no soundKailang Yang1-1/+18
HP NB right speaker had no sound output. This platform was connected to I2S Amp for speaker out.(None Realtek I2S Amp IC) EC need to check codec GPIO1 pin to initial I2S Amp. Signed-off-by: Kailang Yang <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2020-07-30Bluetooth: Enable RPA TimeoutSathish Narasimman2-0/+10
Enable RPA timeout during bluetooth initialization. The RPA timeout value is used from hdev, which initialized from debug_fs Signed-off-by: Sathish Narasimman <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2020-07-30Bluetooth: Enable/Disable address resolution during le create connSathish Narasimman5-14/+47
In this patch if le_create_conn process is started restrict to disable address resolution and same is disabled during le_enh_connection_complete Signed-off-by: Sathish Narasimman <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2020-07-30Bluetooth: Let controller creates RPA during le create connSathish Narasimman1-1/+7
When address resolution is enabled and set_privacy is enabled let's use own address type as 0x03 Signed-off-by: Sathish Narasimman <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2020-07-30Bluetooth: Translate additional address type during le_connSathish Narasimman1-0/+16
When using controller based address resolution, then the new address types 0x02 and 0x03 are used. These types need to be converted back into either public address or random address types. This patch is specially during LE_CREATE_CONN if using own_add_type as 0x02 or 0x03. Signed-off-by: Sathish Narasimman <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2020-07-30Bluetooth: Update resolving list when updating whitelistMarcel Holtmann1-2/+39
When the whitelist is updated, then also update the entries of the resolving list for devices where IRKs are available. Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sathish Narsimman <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2020-07-30Bluetooth: Configure controller address resolution if availableMarcel Holtmann2-3/+26
When the LL Privacy support is available, then as part of enabling or disabling passive background scanning, it is required to set up the controller based address resolution as well. Since only passive background scanning is utilizing the whitelist, the address resolution is now bound to the whitelist and passive background scanning. All other resolution can be easily done by the host stack. Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sathish Narsimman <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2020-07-30Bluetooth: Translate additional address type correctlyMarcel Holtmann2-2/+13
When using controller based address resolution, then the new address types 0x02 and 0x03 are used. These types need to be converted back into either public address or random address types. Signed-off-by: Marcel Holtmann <[email protected]> Signed-off-by: Sathish Narsimman <[email protected]> Signed-off-by: Marcel Holtmann <[email protected]>
2020-07-30espintcp: count packets dropped in espintcp_rcvSabrina Dubroca1-0/+6
Currently, espintcp_rcv drops packets silently, which makes debugging issues difficult. Count packets as either XfrmInHdrError (when the packet was too short or contained invalid data) or XfrmInError (for other issues). Signed-off-by: Sabrina Dubroca <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2020-07-30espintcp: handle short messages instead of breaking the encap socketSabrina Dubroca1-1/+24
Currently, short messages (less than 4 bytes after the length header) will break the stream of messages. This is unnecessary, since we can still parse messages even if they're too short to contain any usable data. This is also bogus, as keepalive messages (a single 0xff byte), though not needed with TCP encapsulation, should be allowed. This patch changes the stream parser so that short messages are accepted and dropped in the kernel. Messages that contain a valid SPI or non-ESP header are processed as before. Fixes: e27cca96cd68 ("xfrm: add espintcp (RFC 8229)") Reported-by: Andrew Cagney <[email protected]> Signed-off-by: Sabrina Dubroca <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2020-07-29random32: remove net_rand_state from the latent entropy gcc pluginLinus Torvalds2-2/+2
It turns out that the plugin right now ends up being really unhappy about the change from 'static' to 'extern' storage that happened in commit f227e3ec3b5c ("random32: update the net random state on interrupt and activity"). This is probably a trivial fix for the latent_entropy plugin, but for now, just remove net_rand_state from the list of things the plugin worries about. Reported-by: Stephen Rothwell <[email protected]> Cc: Emese Revfy <[email protected]> Cc: Kees Cook <[email protected]> Cc: Willy Tarreau <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2020-07-29PCI/ASPM: Disable ASPM on ASMedia ASM1083/1085 PCIe-to-PCI bridgeRobert Hancock1-0/+13
Recently ASPM handling was changed to allow ASPM on PCIe-to-PCI/PCI-X bridges. Unfortunately the ASMedia ASM1083/1085 PCIe to PCI bridge device doesn't seem to function properly with ASPM enabled. On an Asus PRIME H270-PRO motherboard, it causes errors like these: pcieport 0000:00:1c.0: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID) pcieport 0000:00:1c.0: AER: device [8086:a292] error status/mask=00003000/00002000 pcieport 0000:00:1c.0: AER: [12] Timeout pcieport 0000:00:1c.0: AER: Corrected error received: 0000:00:1c.0 pcieport 0000:00:1c.0: AER: can't find device of ID00e0 In addition to flooding the kernel log, this also causes the machine to wake up immediately after suspend is initiated. The device advertises ASPM L0s and L1 support in the Link Capabilities register, but the ASMedia web page for ASM1083 [1] claims "No PCIe ASPM support". Windows 10 (build 2004) enables L0s, but it also logs correctable PCIe errors. Add a quirk to disable ASPM for this device. [1] https://www.asmedia.com.tw/eng/e_show_products.php?cate_index=169&item=114 [bhelgaas: commit log] Fixes: 66ff14e59e8a ("PCI/ASPM: Allow ASPM on links to PCIe-to-PCI/PCI-X Bridges") Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=208667 Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Robert Hancock <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2020-07-30selftests/bpf: Extend map-in-map selftest to detect memory leaksAndrii Nakryiko1-14/+110
Add test validating that all inner maps are released properly after skeleton is destroyed. To ensure determinism, trigger kernel-side synchronize_rcu() before checking map existence by their IDs. Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-07-30bpf: Fix map leak in HASH_OF_MAPS mapAndrii Nakryiko1-3/+9
Fix HASH_OF_MAPS bug of not putting inner map pointer on bpf_map_elem_update() operation. This is due to per-cpu extra_elems optimization, which bypassed free_htab_elem() logic doing proper clean ups. Make sure that inner map is put properly in optimized case as well. Fixes: 8c290e60fa2a ("bpf: fix hashmap extra_elems logic") Signed-off-by: Andrii Nakryiko <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Acked-by: Song Liu <[email protected]> Link: https://lore.kernel.org/bpf/[email protected]
2020-07-29ibmvnic: Fix IRQ mapping disposal in error pathThomas Falcon1-1/+1
RX queue IRQ mappings are disposed in both the TX IRQ and RX IRQ error paths. Fix this and dispose of TX IRQ mappings correctly in case of an error. Fixes: ea22d51a7831 ("ibmvnic: simplify and improve driver probe function") Signed-off-by: Thomas Falcon <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29fib: fix fib_rules_ops indirect calls wrappersBrian Vazquez1-13/+20
This patch fixes: commit b9aaec8f0be5 ("fib: use indirect call wrappers in the most common fib_rules_ops") which didn't consider the case when CONFIG_IPV6_MULTIPLE_TABLES is not set. Reported-by: Stephen Rothwell <[email protected]> Fixes: b9aaec8f0be5 ("fib: use indirect call wrappers in the most common fib_rules_ops") Signed-off-by: Brian Vazquez <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29Merge branch '100GbE' of ↵David S. Miller15-78/+346
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/next-queue Tony Nguyen says: ==================== 100GbE Intel Wired LAN Driver Updates 2020-07-29 This series contains updates to the ice driver only. Dave works around LFC settings not being preserved through link events. Fixes link issues with GLOBR reset and handling of multiple link events. Nick restores VF MSI-X after PCI reset. Kiran corrects the error code returned in ice_aq_sw_rules if the rule does not exist. Paul prevents overwriting of user set descriptors. Tarun adds masking before accessing rate limiting profile types and corrects queue bandwidth configuration. Victor modifies Tx queue scheduler distribution to spread more evenly across queue group nodes. Krzysztof sets need_wakeup flag for Tx AF_XDP. Brett allows VLANs in safe mode. Marcin cleans up VSIs on probe failure. Bruce reduces the scope of a variable. Ben removes a FW workaround. Tony fixes an unused parameter warning. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-07-29Merge tag 'audit-pr-20200729' of ↵Linus Torvalds3-9/+3
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit Pull audit fixes from Paul Moore: "One small audit fix that you can hopefully merge before v5.8 is released. Unfortunately it is a revert of a patch that went in during the v5.7 window and we just recently started to see some bug reports relating to that commit. We are working on a proper fix, but I'm not yet clear on when that will be ready and we need to fix the v5.7 kernels anyway, so in the interest of time a revert seemed like the best solution right now" * tag 'audit-pr-20200729' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit: revert: 1320a4052ea1 ("audit: trigger accompanying records when no rules present")
2020-07-29Merge tag '9p-for-5.8-2' of git://github.com/martinetd/linux into masterLinus Torvalds1-9/+30
Pull 9p fixes from Dominique Martinet: "A couple of syzcaller fixes for 5.8 The first one in particular has been quite noisy ("broke" in -rc5) so this would be worth landing even this late even if users likely won't see a difference" * tag '9p-for-5.8-2' of git://github.com/martinetd/linux: 9p/trans_fd: Fix concurrency del of req_list in p9_fd_cancelled/p9_read_work net/9p: validate fds in p9_fd_open
2020-07-29net: mvneta: fix comment about phylink_speed_downJisheng Zhang1-1/+1
mvneta has switched to phylink, so the comment should look like "We may have called phylink_speed_down before". Signed-off-by: Jisheng Zhang <[email protected]> Reviewed-by: Russell King <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29Merge branch 'mlxsw-fixes'David S. Miller8-41/+51
Ido Schimmel says: ==================== mlxsw fixes This patch set contains various fixes for mlxsw. Patches #1-#2 fix two trap related issues introduced in previous cycle. Patches #3-#5 fix rare use-after-frees discovered by syzkaller. After over a week of fuzzing with the fixes, the bugs did not reproduce. Patch #6 from Amit fixes an issue in the ethtool selftest that was recently discovered after running the test on a new platform that supports only 1Gbps and 10Gbps speeds. ==================== Signed-off-by: David S. Miller <[email protected]>
2020-07-29selftests: ethtool: Fix test when only two speeds are supportedAmit Cohen1-2/+0
The test case check_highest_speed_is_chosen() configures $h1 to advertise a subset of its supported speeds and checks that $h2 chooses the highest speed from the subset. To find the common advertised speeds between $h1 and $h2, common_speeds_get() is called. Currently, the first speed returned from common_speeds_get() is removed claiming "h1 does not advertise this speed". The claim is wrong because the function is called after $h1 already advertised a subset of speeds. In case $h1 supports only two speeds, it will advertise a single speed which will be later removed because of previously mentioned bug. This results in the test needlessly failing. When more than two speeds are supported this is not an issue because the first advertised speed is the lowest one. Fix this by not removing any speed from the list of commonly advertised speeds. Fixes: 64916b57c0b1 ("selftests: forwarding: Add speed and auto-negotiation test") Reported-by: Danielle Ratson <[email protected]> Signed-off-by: Amit Cohen <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29mlxsw: spectrum_router: Fix use-after-free in router init / de-initIdo Schimmel1-24/+26
Several notifiers are registered as part of router initialization. Since some of these notifiers are registered before the end of the initialization, it is possible for them to access uninitialized or freed memory when processing notifications [1]. Additionally, some of these notifiers queue work items on a workqueue. If these work items are executed after the router was de-initialized, they will access freed memory. Fix both problems by moving the registration of the notifiers to the end of the router initialization and flush the work queue after they are unregistered. [1] BUG: KASAN: use-after-free in __mutex_lock_common kernel/locking/mutex.c:938 [inline] BUG: KASAN: use-after-free in __mutex_lock+0xeea/0x1340 kernel/locking/mutex.c:1103 Read of size 8 at addr ffff888038c3a6e0 by task kworker/u4:1/61 CPU: 1 PID: 61 Comm: kworker/u4:1 Not tainted 5.8.0-rc2+ #36 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Workqueue: mlxsw_core_ordered mlxsw_sp_inet6addr_event_work Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 __mutex_lock_common kernel/locking/mutex.c:938 [inline] __mutex_lock+0xeea/0x1340 kernel/locking/mutex.c:1103 mlxsw_sp_inet6addr_event_work+0xb3/0x1b0 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:7123 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 Allocated by task 1298: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467 kmalloc include/linux/slab.h:555 [inline] kzalloc include/linux/slab.h:669 [inline] mlxsw_sp_router_init+0xb2/0x1d20 drivers/net/ethernet/mellanox/mlxsw/spectrum_router.c:8074 mlxsw_sp_init+0xbd8/0x3ac0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2932 __mlxsw_core_bus_device_register+0x657/0x10d0 drivers/net/ethernet/mellanox/mlxsw/core.c:1375 mlxsw_core_bus_device_register drivers/net/ethernet/mellanox/mlxsw/core.c:1436 [inline] mlxsw_devlink_core_bus_device_reload_up+0xcd/0x150 drivers/net/ethernet/mellanox/mlxsw/core.c:1133 devlink_reload net/core/devlink.c:2959 [inline] devlink_reload+0x281/0x3b0 net/core/devlink.c:2944 devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987 genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline] genl_family_rcv_msg net/netlink/genetlink.c:736 [inline] genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0x150/0x190 net/socket.c:672 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363 ___sys_sendmsg+0xff/0x170 net/socket.c:2417 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Freed by task 1348: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1474 [inline] slab_free_freelist_hook mm/slub.c:1507 [inline] slab_free mm/slub.c:3072 [inline] kfree+0xe6/0x320 mm/slub.c:4063 mlxsw_sp_fini+0x340/0x4e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:3132 mlxsw_core_bus_device_unregister+0x16c/0x6d0 drivers/net/ethernet/mellanox/mlxsw/core.c:1474 mlxsw_devlink_core_bus_device_reload_down+0x8e/0xc0 drivers/net/ethernet/mellanox/mlxsw/core.c:1123 devlink_reload+0xc6/0x3b0 net/core/devlink.c:2952 devlink_nl_cmd_reload+0x2f1/0x7c0 net/core/devlink.c:2987 genl_family_rcv_msg_doit net/netlink/genetlink.c:691 [inline] genl_family_rcv_msg net/netlink/genetlink.c:736 [inline] genl_rcv_msg+0x611/0x9d0 net/netlink/genetlink.c:753 netlink_rcv_skb+0x152/0x440 net/netlink/af_netlink.c:2469 genl_rcv+0x24/0x40 net/netlink/genetlink.c:764 netlink_unicast_kernel net/netlink/af_netlink.c:1303 [inline] netlink_unicast+0x53a/0x750 net/netlink/af_netlink.c:1329 netlink_sendmsg+0x850/0xd90 net/netlink/af_netlink.c:1918 sock_sendmsg_nosec net/socket.c:652 [inline] sock_sendmsg+0x150/0x190 net/socket.c:672 ____sys_sendmsg+0x6d8/0x840 net/socket.c:2363 ___sys_sendmsg+0xff/0x170 net/socket.c:2417 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2450 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:359 entry_SYSCALL_64_after_hwframe+0x44/0xa9 The buggy address belongs to the object at ffff888038c3a000 which belongs to the cache kmalloc-2k of size 2048 The buggy address is located 1760 bytes inside of 2048-byte region [ffff888038c3a000, ffff888038c3a800) The buggy address belongs to the page: page:ffffea0000e30e00 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 head:ffffea0000e30e00 order:3 compound_mapcount:0 compound_pincount:0 flags: 0x100000000010200(slab|head) raw: 0100000000010200 dead000000000100 dead000000000122 ffff88806c40c000 raw: 0000000000000000 0000000000080008 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff888038c3a580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888038c3a600: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff888038c3a680: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff888038c3a700: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff888038c3a780: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: 965fa8e600d2 ("mlxsw: spectrum_router: Make RIF deletion more robust") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29mlxsw: core: Free EMAD transactions using kfree_rcu()Ido Schimmel1-1/+1
The lifetime of EMAD transactions (i.e., 'struct mlxsw_reg_trans') is managed using RCU. They are freed using kfree_rcu() once the transaction ends. However, in case the transaction failed it is freed immediately after being removed from the active transactions list. This is problematic because it is still possible for a different CPU to dereference the transaction from an RCU read-side critical section while traversing the active transaction list in mlxsw_emad_rx_listener_func(). In which case, a use-after-free is triggered [1]. Fix this by freeing the transaction after a grace period by calling kfree_rcu(). [1] BUG: KASAN: use-after-free in mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671 Read of size 8 at addr ffff88800b7964e8 by task syz-executor.2/2881 CPU: 0 PID: 2881 Comm: syz-executor.2 Not tainted 5.8.0-rc4+ #44 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58e9a3f-prebuilt.qemu.org 04/01/2014 Call Trace: <IRQ> __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0xf6/0x16e lib/dump_stack.c:118 print_address_description.constprop.0+0x1c/0x250 mm/kasan/report.c:383 __kasan_report mm/kasan/report.c:513 [inline] kasan_report.cold+0x1f/0x37 mm/kasan/report.c:530 mlxsw_emad_rx_listener_func+0x969/0xac0 drivers/net/ethernet/mellanox/mlxsw/core.c:671 mlxsw_core_skb_receive+0x571/0x700 drivers/net/ethernet/mellanox/mlxsw/core.c:2061 mlxsw_pci_cqe_rdq_handle drivers/net/ethernet/mellanox/mlxsw/pci.c:595 [inline] mlxsw_pci_cq_tasklet+0x12a6/0x2520 drivers/net/ethernet/mellanox/mlxsw/pci.c:651 tasklet_action_common.isra.0+0x13f/0x3e0 kernel/softirq.c:550 __do_softirq+0x223/0x964 kernel/softirq.c:292 asm_call_on_stack+0x12/0x20 arch/x86/entry/entry_64.S:711 </IRQ> __run_on_irqstack arch/x86/include/asm/irq_stack.h:22 [inline] run_on_irqstack_cond arch/x86/include/asm/irq_stack.h:48 [inline] do_softirq_own_stack+0x109/0x140 arch/x86/kernel/irq_64.c:77 invoke_softirq kernel/softirq.c:387 [inline] __irq_exit_rcu kernel/softirq.c:417 [inline] irq_exit_rcu+0x16f/0x1a0 kernel/softirq.c:429 sysvec_apic_timer_interrupt+0x4e/0xd0 arch/x86/kernel/apic/apic.c:1091 asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:587 RIP: 0010:arch_local_irq_restore arch/x86/include/asm/irqflags.h:85 [inline] RIP: 0010:__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160 [inline] RIP: 0010:_raw_spin_unlock_irqrestore+0x3b/0x40 kernel/locking/spinlock.c:191 Code: e8 2a c3 f4 fc 48 89 ef e8 12 96 f5 fc f6 c7 02 75 11 53 9d e8 d6 db 11 fd 65 ff 0d 1f 21 b3 56 5b 5d c3 e8 a7 d7 11 fd 53 9d <eb> ed 0f 1f 00 55 48 89 fd 65 ff 05 05 21 b3 56 ff 74 24 08 48 8d RSP: 0018:ffff8880446ffd80 EFLAGS: 00000286 RAX: 0000000000000006 RBX: 0000000000000286 RCX: 0000000000000006 RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffffffffa94ecea9 RBP: ffff888012934408 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000001 R11: fffffbfff57be301 R12: 1ffff110088dffc1 R13: ffff888037b817c0 R14: ffff88802442415a R15: ffff888024424000 __do_sys_perf_event_open+0x1b5d/0x2bd0 kernel/events/core.c:11874 do_syscall_64+0x56/0xa0 arch/x86/entry/common.c:384 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x473dbd Code: Bad RIP value. RSP: 002b:00007f21e5e9cc28 EFLAGS: 00000246 ORIG_RAX: 000000000000012a RAX: ffffffffffffffda RBX: 000000000057bf00 RCX: 0000000000473dbd RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000020000040 RBP: 000000000057bf00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000003 R11: 0000000000000246 R12: 000000000057bf0c R13: 00007ffd0493503f R14: 00000000004d0f46 R15: 00007f21e5e9cd80 Allocated by task 871: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] __kasan_kmalloc mm/kasan/common.c:494 [inline] __kasan_kmalloc.constprop.0+0xc2/0xd0 mm/kasan/common.c:467 kmalloc include/linux/slab.h:555 [inline] kzalloc include/linux/slab.h:669 [inline] mlxsw_core_reg_access_emad+0x70/0x1410 drivers/net/ethernet/mellanox/mlxsw/core.c:1812 mlxsw_core_reg_access+0xeb/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1991 mlxsw_sp_port_get_hw_xstats+0x335/0x7e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1130 update_stats_cache+0xf4/0x140 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1173 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 Freed by task 871: save_stack+0x1b/0x40 mm/kasan/common.c:48 set_track mm/kasan/common.c:56 [inline] kasan_set_free_info mm/kasan/common.c:316 [inline] __kasan_slab_free+0x12c/0x170 mm/kasan/common.c:455 slab_free_hook mm/slub.c:1474 [inline] slab_free_freelist_hook mm/slub.c:1507 [inline] slab_free mm/slub.c:3072 [inline] kfree+0xe6/0x320 mm/slub.c:4052 mlxsw_core_reg_access_emad+0xd45/0x1410 drivers/net/ethernet/mellanox/mlxsw/core.c:1819 mlxsw_core_reg_access+0xeb/0x540 drivers/net/ethernet/mellanox/mlxsw/core.c:1991 mlxsw_sp_port_get_hw_xstats+0x335/0x7e0 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1130 update_stats_cache+0xf4/0x140 drivers/net/ethernet/mellanox/mlxsw/spectrum.c:1173 process_one_work+0xa3e/0x17a0 kernel/workqueue.c:2269 worker_thread+0x9e/0x1050 kernel/workqueue.c:2415 kthread+0x355/0x470 kernel/kthread.c:291 ret_from_fork+0x22/0x30 arch/x86/entry/entry_64.S:293 The buggy address belongs to the object at ffff88800b796400 which belongs to the cache kmalloc-512 of size 512 The buggy address is located 232 bytes inside of 512-byte region [ffff88800b796400, ffff88800b796600) The buggy address belongs to the page: page:ffffea00002de500 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 head:ffffea00002de500 order:2 compound_mapcount:0 compound_pincount:0 flags: 0x100000000010200(slab|head) raw: 0100000000010200 dead000000000100 dead000000000122 ffff88806c402500 raw: 0000000000000000 0000000000100010 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffff88800b796380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc ffff88800b796400: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb >ffff88800b796480: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ^ ffff88800b796500: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb ffff88800b796580: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb Fixes: caf7297e7ab5 ("mlxsw: core: Introduce support for asynchronous EMAD register access") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29mlxsw: core: Increase scope of RCU read-side critical sectionIdo Schimmel1-2/+4
The lifetime of the Rx listener item ('rxl_item') is managed using RCU, but is dereferenced outside of RCU read-side critical section, which can lead to a use-after-free. Fix this by increasing the scope of the RCU read-side critical section. Fixes: 93c1edb27f9e ("mlxsw: Introduce Mellanox switch driver core") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29mlxsw: spectrum: Use different trap group for externally routed packetsIdo Schimmel5-3/+20
Cited commit mistakenly removed the trap group for externally routed packets (e.g., via the management interface) and grouped locally routed and externally routed packet traps under the same group, thereby subjecting them to the same policer. This can result in problems, for example, when FRR is restarted and suddenly all transient traffic is trapped to the CPU because of a default route through the management interface. Locally routed packets required to re-establish a BGP connection will never reach the CPU and the routing tables will not be re-populated. Fix this by using a different trap group for externally routed packets. Fixes: 8110668ecd9a ("mlxsw: spectrum_trap: Register layer 3 control traps") Reported-by: Alex Veber <[email protected]> Tested-by: Alex Veber <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29mlxsw: spectrum_router: Allow programming link-local host routesIdo Schimmel1-9/+0
Cited commit added the ability to program link-local prefix routes to the ASIC so that relevant packets are routed and trapped correctly. However, host routes were not included in the change and thus not programmed to the ASIC. This can result in packets being trapped via an external route trap instead of a local route trap as in IPv4. Fix this by programming all the link-local routes to the ASIC. Fixes: 10d3757fcb07 ("mlxsw: spectrum_router: Allow programming link-local prefix routes") Reported-by: Alex Veber <[email protected]> Tested-by: Alex Veber <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29ipv4: Silence suspicious RCU usage warningIdo Schimmel1-1/+1
fib_trie_unmerge() is called with RTNL held, but not from an RCU read-side critical section. This leads to the following warning [1] when the FIB alias list in a leaf is traversed with hlist_for_each_entry_rcu(). Since the function is always called with RTNL held and since modification of the list is protected by RTNL, simply use hlist_for_each_entry() and silence the warning. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Not tainted ----------------------------- net/ipv4/fib_trie.c:1867 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by ip/164: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: rtnetlink_rcv_msg+0x49a/0xbd0 stack backtrace: CPU: 0 PID: 164 Comm: ip Not tainted 5.8.0-rc4-custom-01520-gc1f937f3f83b #30 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d fib_trie_unmerge+0x608/0xdb0 fib_unmerge+0x44/0x360 fib4_rule_configure+0xc8/0xad0 fib_nl_newrule+0x37a/0x1dd0 rtnetlink_rcv_msg+0x4f7/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 ____sys_sendmsg+0x879/0xa00 ___sys_sendmsg+0x122/0x190 __sys_sendmsg+0x103/0x1d0 __x64_sys_sendmsg+0x7d/0xb0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fc80a234e97 Code: Bad RIP value. RSP: 002b:00007ffef8b66798 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fc80a234e97 RDX: 0000000000000000 RSI: 00007ffef8b66800 RDI: 0000000000000003 RBP: 000000005f141b1c R08: 0000000000000001 R09: 0000000000000000 R10: 00007fc80a2a8ac0 R11: 0000000000000246 R12: 0000000000000001 R13: 0000000000000000 R14: 00007ffef8b67008 R15: 0000556fccb10020 Fixes: 0ddcf43d5d4a ("ipv4: FIB Local/MAIN table collapse") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29vxlan: Ensure FDB dump is performed under RCUIdo Schimmel1-2/+8
The commit cited below removed the RCU read-side critical section from rtnl_fdb_dump() which means that the ndo_fdb_dump() callback is invoked without RCU protection. This results in the following warning [1] in the VXLAN driver, which relied on the callback being invoked from an RCU read-side critical section. Fix this by calling rcu_read_lock() in the VXLAN driver, as already done in the bridge driver. [1] WARNING: suspicious RCU usage 5.8.0-rc4-custom-01521-g481007553ce6 #29 Not tainted ----------------------------- drivers/net/vxlan.c:1379 RCU-list traversed in non-reader section!! other info that might help us debug this: rcu_scheduler_active = 2, debug_locks = 1 1 lock held by bridge/166: #0: ffffffff85a27850 (rtnl_mutex){+.+.}-{3:3}, at: netlink_dump+0xea/0x1090 stack backtrace: CPU: 1 PID: 166 Comm: bridge Not tainted 5.8.0-rc4-custom-01521-g481007553ce6 #29 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 Call Trace: dump_stack+0x100/0x184 lockdep_rcu_suspicious+0x153/0x15d vxlan_fdb_dump+0x51e/0x6d0 rtnl_fdb_dump+0x4dc/0xad0 netlink_dump+0x540/0x1090 __netlink_dump_start+0x695/0x950 rtnetlink_rcv_msg+0x802/0xbd0 netlink_rcv_skb+0x17a/0x480 rtnetlink_rcv+0x22/0x30 netlink_unicast+0x5ae/0x890 netlink_sendmsg+0x98a/0xf40 __sys_sendto+0x279/0x3b0 __x64_sys_sendto+0xe6/0x1a0 do_syscall_64+0x54/0xa0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe14fa2ade0 Code: Bad RIP value. RSP: 002b:00007fff75bb5b88 EFLAGS: 00000246 ORIG_RAX: 000000000000002c RAX: ffffffffffffffda RBX: 00005614b1ba0020 RCX: 00007fe14fa2ade0 RDX: 000000000000011c RSI: 00007fff75bb5b90 RDI: 0000000000000003 RBP: 00007fff75bb5b90 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00005614b1b89160 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 Fixes: 5e6d24358799 ("bridge: netlink dump interface at par with brctl") Signed-off-by: Ido Schimmel <[email protected]> Reviewed-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2020-07-29IB/rdmavt: Fix RQ counting issues causing use of an invalid RWQEMike Marciniszyn3-32/+24
The lookaside count is improperly initialized to the size of the Receive Queue with the additional +1. In the traces below, the RQ size is 384, so the count was set to 385. The lookaside count is then rarely refreshed. Note the high and incorrect count in the trace below: rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9008 wr_id 55c7206d75a0 qpn c qpt 2 pid 3018 num_sge 1 head 1 tail 0, count 385 rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1 The head,tail indicate there is only one RWQE posted although the count says 385 and we correctly return the element 0. The next call to rvt_get_rwqe with the decremented count: rvt_get_rwqe: [hfi1_0] wqe ffffc900078e9058 wr_id 0 qpn c qpt 2 pid 3018 num_sge 0 head 1 tail 1, count 384 rvt_get_rwqe: (hfi1_rc_rcv+0x4eb/0x1480 [hfi1] <- rvt_get_rwqe) ret=0x1 Note that the RQ is empty (head == tail) yet we return the RWQE at tail 1, which is not valid because of the bogus high count. Best case, the RWQE has never been posted and the rc logic sees an RWQE that is too small (all zeros) and puts the QP into an error state. In the worst case, a server slow at posting receive buffers might fool rvt_get_rwqe() into fetching an old RWQE and corrupt memory. Fix by deleting the faulty initialization code and creating an inline to fetch the posted count and convert all callers to use new inline. Fixes: f592ae3c999f ("IB/rdmavt: Fracture single lock used for posting and processing RWQEs") Link: https://lore.kernel.org/r/[email protected] Reported-by: Zhaojuan Guo <[email protected]> Cc: <[email protected]> # 5.4.x Reviewed-by: Kaike Wan <[email protected]> Signed-off-by: Mike Marciniszyn <[email protected]> Tested-by: Honggang Li <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2020-07-29netfilter: ip6tables: Remove redundant null checksGaurav Singh4-8/+4
Remove superfluous check for NULL pointer to header. Signed-off-by: Gaurav Singh <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2020-07-29Merge tag 'drm-fixes-2020-07-29' of git://anongit.freedesktop.org/drm/drm ↵Linus Torvalds14-35/+76
into master Pull drm fixes from Dave Airlie: "The nouveau fixes missed the last pull by a few hours, and we had a few arm driver/panel/bridge fixes come in. This is possibly a bit more than I'm comfortable sending at this stage, but I've looked at each patch, the core + nouveau patches fix regressions, and the arm related ones are all around screens turning on and working, and are mostly trivial patches, the line count is mostly in comments. core: - fix possible use-after-free drm_fb_helper: - regression fix to use memcpy_io on bochs' sparc64 nouveau: - format modifiers fixes - HDA regression fix - turing modesetting race fix of: - fix a double free dbi: - fix SPI Type 1 transfer mcde: - fix screen stability crash panel: - panel: fix display noise on auo,kd101n80-45na - panel: delay HPD checks for boe_nv133fhm_n61 bridge: - bridge: drop connector check in nwl-dsi bridge - bridge: set proper bridge type for adv7511" * tag 'drm-fixes-2020-07-29' of git://anongit.freedesktop.org/drm/drm: drm: hold gem reference until object is no longer accessed drm/dbi: Fix SPI Type 1 (9-bit) transfer drm/drm_fb_helper: fix fbdev with sparc64 drm/mcde: Fix stability issue drm/bridge: nwl-dsi: Drop DRM_BRIDGE_ATTACH_NO_CONNECTOR check. drm/panel: Fix auo, kd101n80-45na horizontal noise on edges of panel drm: panel: simple: Delay HPD checking on boe_nv133fhm_n61 for 15 ms drm/bridge/adv7511: set the bridge type properly drm: of: Fix double-free bug drm/nouveau/fbcon: zero-initialise the mode_cmd2 structure drm/nouveau/fbcon: fix module unload when fbcon init has failed for some reason drm/nouveau/kms/tu102: wait for core update to complete when assigning windows drm/nouveau/kms/gf100: use correct format modifiers drm/nouveau/disp/gm200-: fix regression from HDA SOR selection changes
Powered by cgit, Gruvboxed by Blaster4385.