| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
in recent kernel versions there are warnings about incorrect MTU size
like these:
eth0: mtu greater than device maximum
mtk_soc_eth 1b100000.ethernet eth0: error -22 setting MTU to include DSA overhead
Fixes: bfcb813203e6 ("net: dsa: configure the MTU for switch ports")
Fixes: 72579e14a1d3 ("net: dsa: don't fail to probe if we couldn't set the MTU")
Fixes: 7a4c53bee332 ("net: report invalid mtu value via netlink extack")
Signed-off-by: Landen Chao <[email protected]>
Signed-off-by: Frank Wunderlich <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
If some processes in nixge_probe() fail, free_netdev(dev)
needs to be called to aviod a memory leak.
Fixes: 87ab207981ec ("net: nixge: Separate ctrl and dma resources")
Fixes: abcd3d6fc640 ("net: nixge: Fix error path for obtaining mac address")
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Lu Wei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Remove duplicated include.
Signed-off-by: YueHaibing <[email protected]>
Acked-by: Edward Cree <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Number of .dumpit functions try to ignore -EOPNOTSUPP errors.
Recent change missed that, and started reporting all errors
but -EMSGSIZE back from dumps. This leads to situation like
this:
$ devlink dev info
devlink answers: Operation not supported
Dump should not report an error just because the last device
to be queried could not provide an answer.
To fix this and avoid similar confusion make sure we clear
err properly, and not leave it set to an error if we don't
terminate the iteration.
Fixes: c62c2cfb801b ("net: devlink: don't ignore errors during dumpit")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Jiri Pirko <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
There's a race between rxrpc_sendmsg setting up a call, but then failing to
send anything on it due to an error, and recvmsg() seeing the call
completion occur and trying to return the state to the user.
An assertion fails in rxrpc_recvmsg() because the call has already been
released from the socket and is about to be released again as recvmsg deals
with it. (The recvmsg_q queue on the socket holds a ref, so there's no
problem with use-after-free.)
We also have to be careful not to end up reporting an error twice, in such
a way that both returns indicate to userspace that the user ID supplied
with the call is no longer in use - which could cause the client to
malfunction if it recycles the user ID fast enough.
Fix this by the following means:
(1) When sendmsg() creates a call after the point that the call has been
successfully added to the socket, don't return any errors through
sendmsg(), but rather complete the call and let recvmsg() retrieve
them. Make sendmsg() return 0 at this point. Further calls to
sendmsg() for that call will fail with ESHUTDOWN.
Note that at this point, we haven't send any packets yet, so the
server doesn't yet know about the call.
(2) If sendmsg() returns an error when it was expected to create a new
call, it means that the user ID wasn't used.
(3) Mark the call disconnected before marking it completed to prevent an
oops in rxrpc_release_call().
(4) recvmsg() will then retrieve the error and set MSG_EOR to indicate
that the user ID is no longer known by the kernel.
An oops like the following is produced:
kernel BUG at net/rxrpc/recvmsg.c:605!
...
RIP: 0010:rxrpc_recvmsg+0x256/0x5ae
...
Call Trace:
? __init_waitqueue_head+0x2f/0x2f
____sys_recvmsg+0x8a/0x148
? import_iovec+0x69/0x9c
? copy_msghdr_from_user+0x5c/0x86
___sys_recvmsg+0x72/0xaa
? __fget_files+0x22/0x57
? __fget_light+0x46/0x51
? fdget+0x9/0x1b
do_recvmmsg+0x15e/0x232
? _raw_spin_unlock+0xa/0xb
? vtime_delta+0xf/0x25
__x64_sys_recvmmsg+0x2c/0x2f
do_syscall_64+0x4c/0x78
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Fixes: 357f5ef64628 ("rxrpc: Call rxrpc_release_call() on error in rxrpc_new_client_call()")
Reported-by: [email protected]
Signed-off-by: David Howells <[email protected]>
Reviewed-by: Marc Dionne <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
With 4.8.7 firmware, adjtime can change delta instead of absolute time,
which greately increases snap accuracy. PPS alignment doesn't have to
be set for every single TOD change. Other minor changes includes:
adding more debug logs, increasing snap accuracy for pre 4.8.7 firmware
and supporting new tcs2bin format.
Signed-off-by: Min Li <[email protected]>
Acked-by: Richard Cochran <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Tom Parkin says:
====================
l2tp: tidy up l2tp core API
This short series makes some minor tidyup changes to the L2TP core API.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
* Improve the description of the key l2tp subsystem data structures.
* Add high-level description of the main APIs for interacting with l2tp
core.
* Add documentation for the l2tp netlink session command callbacks.
* Document the session pseudowire callbacks.
Signed-off-by: Tom Parkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
All of the l2tp subsystem's exported symbols are exported using
EXPORT_SYMBOL_GPL, except for l2tp_recv_common and l2tp_ioctl.
These functions alone are not useful without the rest of the l2tp
infrastructure, so there's no practical benefit to these symbols using a
different export policy.
Change these exports to use EXPORT_SYMBOL_GPL for consistency with the
rest of l2tp.
Signed-off-by: Tom Parkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The structure of an L2TP data packet header varies depending on the
version of the L2TP protocol being used.
struct l2tp_session used to have a build_header callback to abstract
this difference away. It's clearer to simply choose the correct
function to use when building the data packet (and we save on the
function pointer in the session structure).
This approach does mean dereferencing the parent tunnel structure in
order to determine the tunnel version, but we're doing that in the
transmit path in any case.
Signed-off-by: Tom Parkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
l2tp_session_delete is used to schedule a session instance for deletion.
The function itself always returns zero, and none of its direct callers
check its return value, so have the function return void.
This change de-facto changes the l2tp netlink session_delete callback
prototype since all pseudowires currently use l2tp_session_delete for
their implementation of that operation.
Signed-off-by: Tom Parkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Tunnel and session instances are reference counted, and shouldn't be
directly freed by pseudowire code.
Rather than exporting l2tp_tunnel_free and l2tp_session_free, make them
private to l2tp_core.c, and export the refcount functions instead.
In order to do this, the refcount functions cannot be declared as
inline. Since the codepaths which take and drop tunnel and session
references are not directly in the datapath this shouldn't cause
performance issues.
Signed-off-by: Tom Parkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When __l2tp_session_unhash was first added it was used outside of
l2tp_core.c, but that's no longer the case.
As such, there's no longer a need to export the function. Make it
private inside l2tp_core.c, and relocate it to avoid having to declare
the function prototype in l2tp_core.h.
Since the function is no longer used outside l2tp_core.c, remove the
"__" prefix since we don't need to indicate anything special about its
expected use to callers.
Signed-off-by: Tom Parkin <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The txtimestamp selftest sets a fixed 500us tolerance. This value was
arrived at experimentally. Some platforms have higher variances. Make
this adjustable by adding the following flag:
-t N: tolerance (usec) for timestamp validation.
Signed-off-by: Jian Yang <[email protected]>
Acked-by: Willem de Bruijn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This patch is to replace Thor Thayer as Altera Triple Speed Ethernet
maintainer as he is moving to a different role.
Signed-off-by: Joyce Ooi <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When read netdevsim trap_flow_action_cookie, we need to init it first,
or we will get "Invalid argument" error.
Fixes: d3cbb907ae57 ("netdevsim: add ACL trap reporting cookie as a metadata")
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
IPV6_ADDRFORM causes resource leaks when converting an IPv6 socket
to IPv4, particularly struct ipv6_ac_socklist. Similar to
struct ipv6_mc_socklist, we should just close it on this path.
This bug can be easily reproduced with the following C program:
#include <stdio.h>
#include <string.h>
#include <sys/types.h>
#include <sys/socket.h>
#include <arpa/inet.h>
int main()
{
int s, value;
struct sockaddr_in6 addr;
struct ipv6_mreq m6;
s = socket(AF_INET6, SOCK_DGRAM, 0);
addr.sin6_family = AF_INET6;
addr.sin6_port = htons(5000);
inet_pton(AF_INET6, "::ffff:192.168.122.194", &addr.sin6_addr);
connect(s, (struct sockaddr *)&addr, sizeof(addr));
inet_pton(AF_INET6, "fe80::AAAA", &m6.ipv6mr_multiaddr);
m6.ipv6mr_interface = 5;
setsockopt(s, SOL_IPV6, IPV6_JOIN_ANYCAST, &m6, sizeof(m6));
value = AF_INET;
setsockopt(s, SOL_IPV6, IPV6_ADDRFORM, &value, sizeof(value));
close(s);
return 0;
}
Reported-by: [email protected]
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Cong Wang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
__bpfilter_process_sockopt never initialized the pos variable passed
to the pipe write. This has been mostly harmless in the past as pipes
ignore the offset, but the switch to kernel_write now verified the
position, which can lead to a failure depending on the exact stack
initialization pattern. Initialize the variable to zero to make
rw_verify_area happy.
Fixes: 6955a76fbcd5 ("bpfilter: switch to kernel_write")
Reported-by: Christian Brauner <[email protected]>
Reported-by: Rodrigo Madera <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Rodrigo Madera <[email protected]>
Tested-by: Christian Brauner <[email protected]>
Reviewed-by: Christian Brauner <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Most of libbpf "constructors" on failure return ERR_PTR(err) result encoded as
a pointer. It's a common mistake to eventually pass such malformed pointers
into xxx__destroy()/xxx__free() "destructors". So instead of fixing up
clean up code in selftests and user programs, handle such error pointers in
destructors themselves. This works beautifully for NULL pointers passed to
destructors, so might as well just work for error pointers.
Suggested-by: Song Liu <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Setting IFA_F_NODAD flag for IPv6 addresses to add to loopback is
unnecessary. Duplicate Address Detection does not happen on loopback
device.
Also, passing 'nodad' flag to 'ip address' breaks libbpf CI, which runs in
an environment with BusyBox implementation of 'ip' command, that doesn't
understand this flag.
Fixes: 0ab5539f8584 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Reported-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Jakub Sitnicki <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Tested-by: Andrii Nakryiko <[email protected]>
Acked-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Check that link is NULL or proper pointer before invoking bpf_link__destroy().
Not doing this causes crash in test_progs, when cg_storage_multi selftest
fails.
Fixes: 3573f384014f ("selftests/bpf: Test CGROUP_STORAGE behavior on shared egress + ingress")
Signed-off-by: Andrii Nakryiko <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This patch add xdpdrv mode for test_xdp_redirect.sh since veth has support
native mode. After update here is the test result:
# ./test_xdp_redirect.sh
selftests: test_xdp_redirect xdpgeneric [PASS]
selftests: test_xdp_redirect xdpdrv [PASS]
Signed-off-by: Hangbin Liu <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Acked-by: William Tu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Augment udp_limit test to set and verify socket storage value.
That should be enough to exercise the changes from the previous
patch.
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
This lets us use socket storage from the following hooks:
* BPF_CGROUP_INET_SOCK_CREATE
* BPF_CGROUP_INET_SOCK_RELEASE
* BPF_CGROUP_INET4_POST_BIND
* BPF_CGROUP_INET6_POST_BIND
Using existing 'bpf_sk_storage_get_proto' doesn't work because
second argument is ARG_PTR_TO_SOCKET. Even though
BPF_PROG_TYPE_CGROUP_SOCK hooks operate on 'struct bpf_sock',
the verifier still considers it as a PTR_TO_CTX.
That's why I'm adding another 'bpf_sk_storage_get_cg_sock_proto'
definition strictly for BPF_PROG_TYPE_CGROUP_SOCK which accepts
ARG_PTR_TO_CTX which is really 'struct sock' for this program type.
Signed-off-by: Stanislav Fomichev <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Commit afbf21dce668 ("bpf: Support readonly/readwrite buffers
in verifier") added readonly/readwrite buffer support which
is currently used by bpf_iter tracing programs. It has
a bug with incorrect parameter ordering which later fixed
by Commit f6dfbe31e8fa ("bpf: Fix swapped arguments in calls
to check_buffer_access").
This patch added a test case with a negative offset access
which will trigger the error path.
Without Commit f6dfbe31e8fa, running the test case in the patch,
the error message looks like:
R1_w=rdwr_buf(id=0,off=0,imm=0) R10=fp0
; value_sum += *(__u32 *)(value - 4);
2: (61) r1 = *(u32 *)(r1 -4)
R1 invalid (null) buffer access: off=-4, size=4
With the above commit, the error message looks like:
R1_w=rdwr_buf(id=0,off=0,imm=0) R10=fp0
; value_sum += *(__u32 *)(value - 4);
2: (61) r1 = *(u32 *)(r1 -4)
R1 invalid rdwr buffer access: off=-4, size=4
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
Newline characters are added in two verifier error messages,
refactored in Commit afbf21dce668 ("bpf: Support readonly/readwrite
buffers in verifier"). This way, they do not mix with
messages afterwards.
Signed-off-by: Yonghong Song <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
When a tracing BPF program attempts to read memory without using the
bpf_probe_read() helper, the verifier marks the load instruction with
the BPF_PROBE_MEM flag. Since the arm64 JIT does not currently recognize
this flag it falls back to the interpreter.
Add support for BPF_PROBE_MEM, by appending an exception table to the
BPF program. If the load instruction causes a data abort, the fixup
infrastructure finds the exception table and fixes up the fault, by
clearing the destination register and jumping over the faulting
instruction.
To keep the compact exception table entry format, inspect the pc in
fixup_exception(). A more generic solution would add a "handler" field
to the table entry, like on x86 and s390.
Signed-off-by: Jean-Philippe Brucker <[email protected]>
Signed-off-by: Daniel Borkmann <[email protected]>
Acked-by: Song Liu <[email protected]>
Link: https://lore.kernel.org/bpf/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
pull request (net-next): ipsec-next 2020-07-30
Please note that I did the first time now --no-ff merges
of my testing branch into the master branch to include
the [PATCH 0/n] message of a patchset. Please let me
know if this is desirable, or if I should do it any
different.
1) Introduce a oseq-may-wrap flag to disable anti-replay
protection for manually distributed ICVs as suggested
in RFC 4303. From Petr Vaněk.
2) Patchset to fully support IPCOMP for vti4, vti6 and
xfrm interfaces. From Xin Long.
3) Switch from a linear list to a hash list for xfrm interface
lookups. From Eyal Birger.
4) Fixes to not register one xfrm(6)_tunnel object twice.
From Xin Long.
5) Fix two compile errors that were introduced with the
IPCOMP support for vti and xfrm interfaces.
Also from Xin Long.
6) Make the policy hold queue work with VTI. This was
forgotten when VTI was implemented.
Please pull or let me know if there are problems.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Fix kernel oops observed when an ext adv data is larger than 31 bytes.
This can be reproduced by setting up an advertiser with advertisement
larger than 31 bytes. The issue is not sensitive to the advertisement
content. In particular, this was reproduced with an advertisement of
229 bytes filled with 'A'. See stack trace below.
This is fixed by not catching ext_adv as legacy adv are only cached to
be able to concatenate a scanable adv with its scan response before
sending it up through mgmt.
With ext_adv, this is no longer necessary.
general protection fault: 0000 [#1] SMP PTI
CPU: 6 PID: 205 Comm: kworker/u17:0 Not tainted 5.4.0-37-generic #41-Ubuntu
Hardware name: Dell Inc. XPS 15 7590/0CF6RR, BIOS 1.7.0 05/11/2020
Workqueue: hci0 hci_rx_work [bluetooth]
RIP: 0010:hci_bdaddr_list_lookup+0x1e/0x40 [bluetooth]
Code: ff ff e9 26 ff ff ff 0f 1f 44 00 00 0f 1f 44 00 00 55 48 8b 07 48 89 e5 48 39 c7 75 0a eb 24 48 8b 00 48 39 f8 74 1c 44 8b 06 <44> 39 40 10 75 ef 44 0f b7 4e 04 66 44 39 48 14 75 e3 38 50 16 75
RSP: 0018:ffffbc6a40493c70 EFLAGS: 00010286
RAX: 4141414141414141 RBX: 000000000000001b RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9903e76c100f RDI: ffff9904289d4b28
RBP: ffffbc6a40493c70 R08: 0000000093570362 R09: 0000000000000000
R10: 0000000000000000 R11: ffff9904344eae38 R12: ffff9904289d4000
R13: 0000000000000000 R14: 00000000ffffffa3 R15: ffff9903e76c100f
FS: 0000000000000000(0000) GS:ffff990434580000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007feed125a000 CR3: 00000001b860a003 CR4: 00000000003606e0
Call Trace:
process_adv_report+0x12e/0x560 [bluetooth]
hci_le_meta_evt+0x7b2/0xba0 [bluetooth]
hci_event_packet+0x1c29/0x2a90 [bluetooth]
hci_rx_work+0x19b/0x360 [bluetooth]
process_one_work+0x1eb/0x3b0
worker_thread+0x4d/0x400
kthread+0x104/0x140
Fixes: c215e9397b00 ("Bluetooth: Process extended ADV report event")
Reported-by: Andy Nguyen <[email protected]>
Reported-by: Linus Torvalds <[email protected]>
Reported-by: Balakrishna Godavarthi <[email protected]>
Signed-off-by: Alain Michaud <[email protected]>
Tested-by: Sonny Sasaka <[email protected]>
Acked-by: Marcel Holtmann <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Pull virtio fixes from Michael Tsirkin:
"A couple of last minute bugfixes"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-mem: Fix build error due to improper use 'select'
virtio_balloon: fix up endian-ness for free cmd id
virtio-balloon: Document byte ordering of poison_val
vhost/scsi: fix up req type endian-ness
firmware: Fix a reference count leak.
|
|
Fix build error for the case:
defined(CONFIG_SMP) && !defined(CONFIG_CPU_V6)
config: keystone_defconfig
CC arch/arm/kernel/signal.o
In file included from ../include/linux/random.h:14,
from ../arch/arm/kernel/signal.c:8:
../arch/arm/include/asm/percpu.h: In function ‘__my_cpu_offset’:
../arch/arm/include/asm/percpu.h:29:34: error: ‘current_stack_pointer’ undeclared (first use in this function); did you mean ‘user_stack_pointer’?
: "Q" (*(const unsigned long *)current_stack_pointer));
^~~~~~~~~~~~~~~~~~~~~
user_stack_pointer
Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity")
Signed-off-by: Grygorii Strashko <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fix from Bjorn Helgaas:
"Disable ASPM on ASM1083/1085 PCIe-to-PCI bridge (Robert Hancock)"
* tag 'pci-v5.8-fixes-3' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
PCI/ASPM: Disable ASPM on ASMedia ASM1083/1085 PCIe-to-PCI bridge
|
|
Use eth_zero_addr() to clear mac address instead of memset().
Signed-off-by: Miaohe Lin <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Use eth_zero_addr() to clear mac address instead of memset().
Signed-off-by: Miaohe Lin <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Replace memsets of 1 byte with simple assignment.
Issue found with checkpatch.pl
Signed-off-by: Suraj Upadhyay <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Replace memsets of 1 byte with simple assignment.
Issue found with checkpatch.pl
Signed-off-by: Suraj Upadhyay <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Replace memsets of 1 byte with simple assignments.
Issue found with checkpatch.pl
Signed-off-by: Suraj Upadhyay <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Replace memsets of 1 byte with simple assignments.
Issue reported by checkpatch.pl.
Signed-off-by: Suraj Upadhyay <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
With legacy PM hooks, it was the responsibility of a driver to manage PCI
states and also the device's power state. The generic approach is to let
PCI core handle the work.
e100_suspend() calls __e100_shutdown() to perform intermediate tasks.
__e100_shutdown() calls pci_save_state() which is not recommended.
e100_suspend() also calls __e100_power_off() which is calling PCI helper
functions, pci_prepare_to_sleep(), pci_set_power_state(), along with
pci_wake_from_d3(...,false). Hence, the functin call is removed and wol is
disabled as earlier using device_wakeup_disable().
Compile-tested only.
Signed-off-by: Vaibhav Gupta <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
We observed two panics involving races with igb_reset_task.
The first panic is caused by this race condition:
kworker reboot -f
igb_reset_task
igb_reinit_locked
igb_down
napi_synchronize
__igb_shutdown
igb_clear_interrupt_scheme
igb_free_q_vectors
igb_free_q_vector
adapter->q_vector[v_idx] = NULL;
napi_disable
Panics trying to access
adapter->q_vector[v_idx].napi_state
The second panic (a divide error) is caused by this race:
kworker reboot -f tx packet
igb_reset_task
__igb_shutdown
rtnl_lock()
...
igb_clear_interrupt_scheme
igb_free_q_vectors
adapter->num_tx_queues = 0
...
rtnl_unlock()
rtnl_lock()
igb_reinit_locked
igb_down
igb_up
netif_tx_start_all_queues
dev_hard_start_xmit
igb_xmit_frame
igb_tx_queue_mapping
Panics on
r_idx % adapter->num_tx_queues
This commit applies to igb_reset_task the same changes that
were applied to ixgbe in commit 2f90b8657ec9 ("ixgbe: this patch
adds support for DCB to the kernel and ixgbe driver"),
commit 8f4c5c9fb87a ("ixgbe: reinit_locked() should be called with
rtnl_lock") and commit 88adce4ea8f9 ("ixgbe: fix possible race in
reset subtask").
Signed-off-by: Francesco Ruggeri <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
After 'commit e086ba2fccda4 ("e1000e: disable s0ix entry and exit flows
for ME systems")',
ThinkPad P14s always failed to disable ULP by ME.
'commit 0c80cdbf3320 ("e1000e: Warn if disabling ULP failed")'
break out of init phy:
error log:
[ 42.364753] e1000e 0000:00:1f.6 enp0s31f6: Failed to disable ULP
[ 42.524626] e1000e 0000:00:1f.6 enp0s31f6: PHY Wakeup cause - Unicast Packet
[ 42.822476] e1000e 0000:00:1f.6 enp0s31f6: Hardware Error
When disable s0ix, E1000_FWSM_ULP_CFG_DONE will never be 1.
If continue to init phy like before, it can work as before.
iperf test result good too.
Fixes: 0c80cdbf3320 ("e1000e: Warn if disabling ULP failed")
Signed-off-by: Aaron Ma <[email protected]>
Tested-by: Aaron Brown <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|
|
Pull block fixes from Jens Axboe:
"Three NVMe fixes"
* tag 'block-5.8-2020-07-30' of git://git.kernel.dk/linux-block:
nvme: add a Identify Namespace Identification Descriptor list quirk
nvme-pci: prevent SK hynix PC400 from using Write Zeroes command
nvme-tcp: fix possible hang waiting for icresp response
|
|
Pull io_uring fixes from Jens Axboe:
"Two small fixes for corner/error cases"
* tag 'io_uring-5.8-2020-07-30' of git://git.kernel.dk/linux-block:
io_uring: fix lockup in io_fail_links()
io_uring: fix ->work corruption with poll_add
|
|
Daniel Díaz and Kees Cook independently reported that commit
f227e3ec3b5c ("random32: update the net random state on interrupt and
activity") broke arm64 due to a circular dependency on include files
since the addition of percpu.h in random.h.
The correct fix would definitely be to move all the prandom32 stuff out
of random.h but for backporting, a smaller solution is preferred.
This one replaces linux/percpu.h with asm/percpu.h, and this fixes the
problem on x86_64, arm64, arm, and mips. Note that moving percpu.h
around didn't change anything and that removing it entirely broke
differently. When backporting, such options might still be considered
if this patch fails to help.
[ It turns out that an alternate fix seems to be to just remove the
troublesome <asm/pointer_auth.h> remove from the arm64 <asm/smp.h>
that causes the circular dependency.
But we might as well do the whole belt-and-suspenders thing, and
minimize inclusion in <linux/random.h> too. Either will fix the
problem, and both are good changes. - Linus ]
Reported-by: Daniel Díaz <[email protected]>
Reported-by: Kees Cook <[email protected]>
Tested-by: Marc Zyngier <[email protected]>
Fixes: f227e3ec3b5c
Cc: Stephen Rothwell <[email protected]>
Signed-off-by: Willy Tarreau <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Ensure that the ARM PMU PROFILING AND DEBUGGING maintainers are included
for the HiSilicon PMU driver.
Signed-off-by: John Garry <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
Although iph is expected to point to at least 20 bytes of valid memory,
ihl may be bogus, for example on reception of a corrupt packet. If it
happens to be less than 5, we really don't want to run away and
dereference 16GB worth of memory until it wraps back to exactly zero...
Fixes: 0e455d8e80aa ("arm64: Implement optimised IP checksum helpers")
Reported-by: guodeqing <[email protected]>
Signed-off-by: Robin Murphy <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
asm/pointer_auth.h is not needed anymore in asm/smp.h, as 62a679cb2825
("arm64: simplify ptrauth initialization") removed the keys from the
secondary_data structure.
This also cures a compilation issue introduced by f227e3ec3b5c
("random32: update the net random state on interrupt and activity").
Fixes: 62a679cb2825 ("arm64: simplify ptrauth initialization")
Fixes: f227e3ec3b5c ("random32: update the net random state on interrupt and activity")
Acked-by: Catalin Marinas <[email protected]>
Signed-off-by: Marc Zyngier <[email protected]>
Signed-off-by: Will Deacon <[email protected]>
|
|
Commit f7b93d42945c ("arm64/alternatives: use subsections for replacement
sequences") breaks LLVM's integrated assembler, because due to its
one-pass design, it cannot compute instruction sequence lengths before the
layout for the subsection has been finalized. This change fixes the build
by moving the .org directives inside the subsection, so they are processed
after the subsection layout is known.
Fixes: f7b93d42945c ("arm64/alternatives: use subsections for replacement sequences")
Signed-off-by: Sami Tolvanen <[email protected]>
Link: https://github.com/ClangBuiltLinux/linux/issues/1078
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Will Deacon <[email protected]>
|
|
With legacy PM, drivers themselves were responsible for managing the
device's power states and takes care of register states.
After upgrading to the generic structure, PCI core will take care of
required tasks and drivers should do only device-specific operations.
The driver was invoking PCI helper functions like pci_save/restore_state(),
and pci_enable/disable_device(), which is not recommended.
Compile-tested only.
Signed-off-by: Vaibhav Gupta <[email protected]>
Tested-by: Andrew Bowers <[email protected]>
Signed-off-by: Tony Nguyen <[email protected]>
|