aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2010-05-28davinci: da850 TPS6507x touch screen driver board dataTodd Fischer1-0/+12
The touch screen controller in the TPS6507x chip needs values that are dependent on the characteristics of the touch screen hardware being used in the board design. In addition, the board provides version information that is exposed via the kernel input sub-system. Signed-off-by: Todd Fischer <[email protected]> Signed-off-by: Kevin Hilman <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28mfd: Ensure WM831x charger interrupts are acknowledged when suspendingMark Brown2-2/+50
The charger interrupts on the WM831x are unconditionally a wake source for the system. If the power driver is not able to monitor them (for example, due to the IRQ line not having been wired up on the system) then any charger interrupt will prevent the system suspending for any meaningful amount of time since nothing will ack them. Avoid this issue by manually acknowledging these interrupts when we suspend the WM831x core device if they are masked. If software is actually using the interrupts then they will be unmasked and this change will have no effect. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28mfd: Initialise WM831x IRQ masks on chip even if interrupts not in useMark Brown1-8/+8
Ensure that the hardware has interrupts masked if we are not using the interrupt controller on the WM831x by initialising the masks before we check for the setup data required for the IRQ line. This avoids signalling an unused IRQ line and improves the robustness of checks that the IRQ is in use. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28input: Touchscreen driver for TPS6507xTodd Fischer6-0/+443
Add touch screen input driver for TPS6507x family of multi-function chips. Uses the TPS6507x MFD driver. No interrupt support due to testing limitations of current hardware. Signed-off-by: Todd Fischer <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28mfd: Add TPS6507x supportTodd Fischer5-79/+265
TPS6507x are multi function (PM, touchscreen) chipsets from TI. This commit also changes the corresponding regulator driver from being standalone to an MFD subdevice. Signed-off-by: Todd Fischer <[email protected]> Acked-by: Mark Brown <[email protected]> Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28regulator: tps6057x namespace cleanupTodd Fischer1-85/+87
Move from using tps or tsp6507x to tps6057x_pmic in a consistent manner. Signed-off-by: Todd Fischer <[email protected]> Acked-by: Mark Brown <[email protected]> Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28mfd: Add tps6507x board data structureTodd Fischer3-3/+29
Add mfd structure which refrences sub-driver initialization data. For example, for a giving hardware implementation, the voltage regulator sub-driver initialization data provides the mapping betten a voltage regulator and what the output voltage is being used for. Signed-off-by: Todd Fischer <[email protected]> Acked-by: Mark Brown <[email protected]> Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28mfd: Move TPS6507x register definition to header file.Todd Fischer2-59/+135
Other sub-drivers for the TPS6507x chip will need to use register definition so move it out of the source file and into a header file. Signed-off-by: Todd Fischer <[email protected]> Acked-by: Mark Brown <[email protected]> Signed-off-by: Liam Girdwood <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28gpio: Update gfp/slab.h includes for rdc321xTejun Heo1-0/+1
Implicit slab.h inclusion via percpu.h is about to go away. Make sure gfp.h or slab.h is included as necessary. Signed-off-by: Samuel Ortiz <[email protected]> Signed-off-by: Tejun Heo <[email protected]>
2010-05-28mfd: Improve WM831x AUXADC completion handlingMark Brown1-17/+48
Currently completion of WM831x AUXADC conversions is monitored by checking for convertor enable. Due to the mechanism used to ensure data corruption is avoided when reading AUXADC data there may under heavy I/O be a window where this bit has cleared but the conversion results have not been updated. Data availability is only guaranteed after the AUXADC data interrupt has been asserted. Avoid this by always using the interrupt to detect completion. If the chip IRQ is not set up then we poll the IRQ status register for up to 5ms. If it is set up then we rely on the data done interrupt with a vastly increased timeout, failing the conversion if the interrupt is not generated. This also saves a register read when using interrupts. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28gpio: Add support for Janz VMOD-TTL Digital IO moduleIra W. Snyder3-0/+269
The Janz VMOD-TTL is a MODULbus daughterboard which fits onto any MODULbus carrier board. It essentially consists of some various logic and a Zilog Z8536 CIO Counter/Timer and Parallel IO Unit. The board must be physically configured with jumpers to enable a user to drive output signals. I am only interested in outputs, so I have made this driver as simple as possible. It only supports a very minimal subset of the features provided by the Z8536 chip. Signed-off-by: Ira W. Snyder <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28can: Add support for Janz VMOD-ICAN3 Intelligent CAN moduleIra W. Snyder3-0/+1841
The Janz VMOD-ICAN3 is a MODULbus daughterboard which fits onto any MODULbus carrier board. It is an intelligent CAN controller with a microcontroller and associated firmware. Signed-off-by: Ira W. Snyder <[email protected]> Acked-by: Wolfgang Grandegger <[email protected]> Acked-by: David S. Miller <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28mfd: Janz CMOD-IO PCI MODULbus Carrier Board supportIra W. Snyder4-0/+369
The Janz CMOD-IO PCI MODULbus carrier board is a PCI to MODULbus bridge, which may host many different types of MODULbus daughterboards, including CAN and GPIO controllers. Signed-off-by: Ira W. Snyder <[email protected]> Reviewed-by: Wolfgang Grandegger <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28mfd: Proper pcf50633 irq checkDan Carpenter1-2/+2
"pcf->irq_handler" has PCF50633_NUM_IRQ elements. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28mfd: Remove unused wm831x IRQ handler dataMark Brown1-2/+0
This was used by the old, pre-genirq IRQ implementation but is no longer required. Signed-off-by: Mark Brown <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28mfd: Add timb-dma to all configurations of timberdaleRichard Röjfors2-15/+96
Add platform data for timb-dma, and add it in to timb-dma in all configurations of timberdale. Also incremented the version number. Signed-off-by: Richard Röjfors <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28mfd: Section cleanup of 88pm860x driverHenrik Kretzschmar2-5/+5
This patch fixes three section mismatches. WARNING: drivers/mfd/88pm860x.o(.text+0x12): Section mismatch in reference from the function pm860x_device_exit() to the function .devexit.text:device_irq_exit() The function pm860x_device_exit() references a function in an exit section. Often the function device_irq_exit() has valid usage outside the exit section and the fix is to remove the __devexit annotation of device_irq_exit. WARNING: drivers/mfd/88pm860x.o(.text+0xb0): Section mismatch in reference from the function pm860x_device_init() to the function .devinit.text:device_8606_init() The function pm860x_device_init() references the function __devinit device_8606_init(). This is often because pm860x_device_init lacks a __devinit annotation or the annotation of device_8606_init is wrong. WARNING: drivers/mfd/88pm860x.o(.text+0xbe): Section mismatch in reference from the function pm860x_device_init() to the function .devinit.text:device_8607_init() The function pm860x_device_init() references the function __devinit device_8607_init(). This is often because pm860x_device_init lacks a __devinit annotation or the annotation of device_8607_init is wrong. Signed-off-by: Henrik Kretzschmar <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28mfd: Check for mem_base when building IORESOURCE_MEM resourcesSamuel Ortiz1-1/+1
If mem_base is NULL, then we fall back to the default case, just copying the original resource. Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28mfd: Off by one calculating size for timberdaleDan Carpenter1-1/+1
I'm pretty sure that it should be + 1 here. It's an off by one, because we start counting at zero. Signed-off-by: Dan Carpenter <[email protected]> Acked-by: Richard Röjfors <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28x86: remove rdc321x_defs.hFlorian Fainelli1-12/+0
This file is replaced by a cleaner version with the adding of a MFD driver for the southbridge. Signed-off-by: Florian Fainelli <[email protected]> Acked-by: Ingo Molnar <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28watchdog: Convert rdc321x_wdt to use southbridge pci deviceFlorian Fainelli1-13/+40
The RDC321x MFD southbridge driver will pass a reference to the southbridge PCI device which should be used by the watchdog driver for its operations. This patch converts the watchdog driver to use the pci_dev pointer and make use of the base register resource which is passed along with the platform device. Signed-off-by: Florian Fainelli <[email protected]> Acked-by: Wim Van Sebroeck <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28gpio: Add support for RDC321x GPIO controllerFlorian Fainelli3-1/+255
This patch adds a new GPIO driver for the RDC321x SoC GPIO controller. Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28mfd: Add support for the RDC321x southbridgeFlorian Fainelli4-1/+160
This patch adds a new MFD driver for the RDC321x southbridge. This southbridge is always present in the RDC321x System-on-a-Chip and provides access to some GPIOs as well as a watchdog. Access to these two functions is done using the southbridge PCI device configuration space. Signed-off-by: Florian Fainelli <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28mfd: Fix dangling pointersWolfram Sang7-2/+10
Fix I2C-drivers which missed setting clientdata to NULL before freeing the structure it points to. Also fix drivers which do this _after_ the structure was freed already. Signed-off-by: Wolfram Sang <[email protected]> Acked-by: Mark Brown <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28mfd: Add in XIIC to some configurations of timberdaleRichard Röjfors1-0/+41
This patch adds in the Xilinx I2C bus driver to some of the configurations of the timberdale MFD. It provides the I2C devices to the XIIC via platform data in a similar way as done to the ocores driver. Signed-off-by: Richard Röjfors <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-28mfd: Check t7l66 platform_data pointerSamuel Ortiz1-0/+3
We should check for pdata being not NULL before dereferencing it. Reported-by: Dan Carpenter <[email protected]> Signed-off-by: Samuel Ortiz <[email protected]>
2010-05-27[IA64] Fix build breakageTony Luck2-0/+21
In commit 0ac0c0d0f837c499afd02a802f9cf52d3027fa3b cpusets: randomize node rotor used in cpuset_mem_spread_node() Jack Steiner fixed a problem with too many small tasks being assigned to node 0. Copy his code to ia64 to avoid build error. arch/ia64/kernel/smpboot.c:641: error: ‘cpu_to_node_map’ undeclared (first use in this function) In commit 3bccd996276b108c138e8176793a26ecef54d573 numa: ia64: use generic percpu var numa_node_id() implementation Lee Schermerhorn added some set_numa_node() calls - but these only work on CONFIG_NUMA=y configurations. Surround the calls with #ifdef CONFIG_NUMA Signed-off-by: Tony Luck <[email protected]>
2010-05-27Merge branch 'perf-core-for-linus' of ↵Linus Torvalds75-3147/+1847
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (61 commits) tracing: Add __used annotation to event variable perf, trace: Fix !x86 build bug perf report: Support multiple events on the TUI perf annotate: Fix up usage of the build id cache x86/mmiotrace: Remove redundant instruction prefix checks perf annotate: Add TUI interface perf tui: Remove annotate from popup menu after failure perf report: Don't start the TUI if -D is used perf: Fix getline undeclared perf: Optimize perf_tp_event_match() perf: Remove more code from the fastpath perf: Optimize the !vmalloc backed buffer perf: Optimize perf_output_copy() perf: Fix wakeup storm for RO mmap()s perf-record: Share per-cpu buffers perf-record: Remove -M perf: Ensure that IOC_OUTPUT isn't used to create multi-writer buffers perf, trace: Optimize tracepoints by using per-tracepoint-per-cpu hlist to track events perf, trace: Optimize tracepoints by removing IRQ-disable from perf/tracepoint interaction perf tui: Allow disabling the TUI on a per command basis in ~/.perfconfig ...
2010-05-27DMAENGINE: DMA40 U8500 platform configurationLinus Walleij6-1/+283
This completes the DMA40 support with the platform-specific configuration for U8500/DB8500. Signed-off-by: Linus Walleij <[email protected]> Acked-by: Srinidhi Kasagar <[email protected]> Reviewed-by: Alessandro Rubini <[email protected]> Cc: [email protected] Acked-by: Russell King <[email protected]> [fixed up dma40_{tx|rx}_map declaration/initialization] Signed-off-by: Dan Williams <[email protected]>
2010-05-27posix_timer: Fix error path in timer_createAndrey Vagin1-7/+4
Move CLOCK_DISPATCH(which_clock, timer_create, (new_timer)) after all posible EFAULT erros. *_timer_create may allocate/get resources. (for example posix_cpu_timer_create does get_task_struct) [ tglx: fold the remove crappy comment patch into this ] Signed-off-by: Andrey Vagin <[email protected]> Cc: Oleg Nesterov <[email protected]> Cc: Pavel Emelyanov <[email protected]> Cc: <[email protected]> Reviewed-by: Stanislaw Gruszka <[email protected]> Signed-off-by: Andrew Morton <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]>
2010-05-27x86, cpufeature: Unbreak compile with gcc 3.xH. Peter Anvin1-0/+7
gcc 3 is too braindamaged to be able to compile static_cpu_has() -- apparently it can't tell that a constant passed to an inline function is still a constant -- so if we're using gcc 3, just use the dynamic test. This is bad for performance, but if you care about performance, don't use an ancient, known-to-optimize-poorly compiler. Reported-and-tested-by: Eric Dumazet <[email protected]> LKML-Reference: <[email protected]> Signed-off-by: H. Peter Anvin <[email protected]>
2010-05-27Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlightLinus Torvalds18-120/+2750
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight: gta02: Use pcf50633 backlight driver instead of platform backlight driver. backlight: pcf50633: Register a pcf50633-backlight device in pcf50633 core driver. backlight: Add pcf50633 backlight driver backlight: 88pm860x_bl: fix error handling in pm860x_backlight_probe backlight: max8925_bl: Fix error handling path backlight: l4f00242t03: fix error handling in l4f00242t03_probe backlight: add S6E63M0 AMOLED LCD Panel driver backlight: adp8860: add support for ADP8861 & ADP8863 backlight: mbp_nvidia_bl - Fix DMI_SYS_VENDOR for MacBook1,1 backlight: Add Cirrus EP93xx backlight driver backlight: l4f00242t03: Fix regulators handling code in remove function backlight: fix adp8860_bl build errors backlight: new driver for the ADP8860 backlight parts backlight: 88pm860x_bl - potential memory leak backlight: mbp_nvidia_bl - add support for older MacBookPro and MacBook 6,1. backlight: Kconfig cleanup backlight: backlight_device_register() return ERR_PTR()
2010-05-27Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-ledsLinus Torvalds14-29/+691
* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds: leds: Add mx31moboard MC13783 led support leds: Add mc13783 LED support leds: leds-ss4200: fix led_classdev_unregister twice in error handling leds: leds-lp3944: properly handle lp3944_configure fail in lp3944_probe leds: led-class: set permissions on max_brightness file to 0444 leds: leds-gpio: Change blink_set callback to be able to turn off blinking leds: Add LED driver for the Soekris net5501 board leds: 88pm860x - fix checking in probe function
2010-05-27Merge branch 'hwmon-for-linus' of ↵Linus Torvalds21-323/+1543
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: (23 commits) hwmon: (lm75) Add support for the Texas Instruments TMP105 hwmon: (ltc4245) Read only one GPIO pin hwmon: (dme1737) Add SCH5127 support hwmon: (tmp102) Don't always stop chip at exit hwmon: (tmp102) Fix suspend and resume functions hwmon: (tmp102) Various fixes hwmon: Driver for TI TMP102 temperature sensor hwmon: EMC1403 thermal sensor support hwmon: (applesmc) Add temperature sensor labels to sysfs interface hwmon: (applesmc) Add generic support for MacBook Pro 7 hwmon: (applesmc) Add generic support for MacBook Pro 6 hwmon: (applesmc) Add support for MacBook Pro 5,3 and 5,4 hwmon: (tmp401) Reorganize code to get rid of static forward declarations hwmon: (tmp401) Use constants for sysfs file permissions hwmon: (adm1031) Allow setting update rate hwmon: Add description of the update_rate sysfs attribute hwmon: (lm90) Use programmed update rate hwmon: (f71882fg) Acquire I/O regions while we're working with them hwmon: (f71882fg) Code cleanup hwmon: (f71882fg) Use strict_stro(l|ul) instead of simple_strto$1 ...
2010-05-27Merge branches 'misc' and 'qib' into for-nextRoland Dreier4-614/+200
2010-05-27IB/qib: Remove DCA support until feature is finishedRalph Campbell1-189/+0
The DCA code was left over from internal development to test the hardware feature and allow performance testing. The results were mixed and will require some additional work to make full use of the feature. Therefore, it is being removed for now. Signed-off-by: Ralph Campbell <[email protected]> Signed-off-by: Roland Dreier <[email protected]>
2010-05-27hwmon: (lm75) Add support for the Texas Instruments TMP105Shubhrajyoti Datta2-1/+4
Add support for the Texas Instruments TMP105 temperature sensor device. Signed-off-by: Shubhrajyoti Datta <[email protected]> Acked-by: Jonathan Cameron <[email protected]> Signed-off-by: Jean Delvare <[email protected]>
2010-05-27hwmon: (ltc4245) Read only one GPIO pinIra W. Snyder2-16/+6
Read only one of the GPIO pins as an analog voltage. The ADC can be switched to a different GPIO pin at runtime, but this is not supported. Previously, this driver would report the analog voltage of the currently selected GPIO pin as all three GPIO voltages: in9_input, in10_input and in11_input. Signed-off-by: Ira W. Snyder <[email protected]> Signed-off-by: Jean Delvare <[email protected]> Cc: [email protected]
2010-05-27hwmon: (dme1737) Add SCH5127 supportJuerg Haefliger2-113/+266
Add support for the hardware monitoring capabilities of the SCH5127 chip to the dme1737 driver. Signed-off-by: Juerg Haefliger <[email protected]> Signed-off-by: Jean Delvare <[email protected]> Tested-by: Jeff Rickman <[email protected]>
2010-05-27hwmon: (tmp102) Don't always stop chip at exitJean Delvare1-10/+28
Only stop the chip at driver exit if it was stopped when driver was loaded. Leave it running otherwise. Also restore the device configuration if probe failed, to not leave the system in a dangling state. Signed-off-by: Jean Delvare <[email protected]> Cc: Steven King <[email protected]>
2010-05-27hwmon: (tmp102) Fix suspend and resume functionsJean Delvare1-4/+12
Suspend and resume functions shouldn't overwrite the configuration register. They should only alter the one bit they have to touch. Also don't assume that register reads and writes always succeed. Handle errors properly, shall they happen. Signed-off-by: Jean Delvare <[email protected]> Cc: Steven King <[email protected]>
2010-05-27hwmon: (tmp102) Various fixesJean Delvare3-42/+39
Fixes from my driver review: http://lists.lm-sensors.org/pipermail/lm-sensors/2010-March/028051.html Only the small changes are in there, more important changes will come later separately as time permits. * Drop the remnants of the now gone detect function * The TMP102 has no known compatible chip * Include the right header files * Clarify why byte swapping of register values is needed * Strip resolution info bit from temperature register value * Set cache lifetime to 1/3 second * Don't arbitrarily reject limit values; clamp as needed * Make limit writing unconditional * Don't check for transaction types the driver doesn't use * Properly check for error when setting configuration * Report error on failed probe * Make the driver load automatically where needed * Various other minor fixes Signed-off-by: Jean Delvare <[email protected]> Cc: Steven King <[email protected]>
2010-05-27hwmon: Driver for TI TMP102 temperature sensorSteven King4-0/+335
Driver for the TI TMP102. The TI TMP102 is similar to the LM75. It differs from the LM75 by having a 16-bit conf register and the temp registers have a minimum resolution of 12 bits; the extended conf register can select 13-bit resolution (which this driver does) and also change the update rate (which this driver currently doesn't use). [JD: Fix tmp102_exit tag, must be __exit, not __init.] Signed-off-by: Steven King <[email protected]> Signed-off-by: Jean Delvare <[email protected]>
2010-05-27hwmon: EMC1403 thermal sensor supportKalhan Trisal3-0/+355
Provides support for the EMC1403 thermal sensor. Only reporting of values is supported. The various Moorestown specific extras to do with thermal alerts and the like are not in this version of the driver. Considerably edited and tidied up by Alan Cox, plus fixes and detection bits from Jean Delvare. Signed-off-by: Kalhan Trisal <[email protected]> Signed-off-by: Alan Cox <[email protected]> Signed-off-by: Jean Delvare <[email protected]>
2010-05-27hwmon: (applesmc) Add temperature sensor labels to sysfs interfaceAlex Murray1-1/+147
The Apple SMC uses a systematic labeling scheme for the hardware temperature sensors. This scheme is currently hidden from userland. Since the sensor set, and consequently the numbering, differs between models, an extensive database of configurations is required for an application such as fan control. This patch adds the SMC labels to the hwmon sysfs interface, allowing applications to use the sensors more intelligibly. [[email protected]: fixed error handling] Signed-off-by: Alex Murray <[email protected]> Signed-off-by: Henrik Rydberg <[email protected]> Signed-off-by: Jean Delvare <[email protected]>
2010-05-27hwmon: (applesmc) Add generic support for MacBook Pro 7Henrik Rydberg1-0/+9
This patch adds generic support for the MacBook Pro 7 family based on the 7,1 model. Signed-off-by: Henrik Rydberg <[email protected]> Signed-off-by: Jean Delvare <[email protected]>
2010-05-27hwmon: (applesmc) Add generic support for MacBook Pro 6Bernhard Froemel1-0/+10
This patch adds generic support for the MacBook Pro 6 family based on the 6,2 model. [[email protected]: patch cleanup] Signed-off-by: Bernhard Froemel <[email protected]> Signed-off-by: Henrik Rydberg <[email protected]> Signed-off-by: Jean Delvare <[email protected]>
2010-05-27hwmon: (applesmc) Add support for MacBook Pro 5,3 and 5,4Henrik Rydberg1-0/+19
The MacBookPro 5,3 model has two fans, whereas the 5,4 model has only one. This patch adds explicit support for the 5,3 and 5,4 models. Signed-off-by: Henrik Rydberg <[email protected]> Signed-off-by: Jean Delvare <[email protected]>
2010-05-27hwmon: (tmp401) Reorganize code to get rid of static forward declarationsAndre Prendel1-108/+97
Signed-off-by: Andre Prendel <[email protected]> Acked-by: Hans de Goede <[email protected]> Signed-off-by: Jean Delvare <[email protected]>
2010-05-27hwmon: (tmp401) Use constants for sysfs file permissionsAndre Prendel1-22/+28
Replace octal representation of file permissions by the corresponding constants. Signed-off-by: Andre Prendel <[email protected]> Acked-by: Hans de Goede <[email protected]> Signed-off-by: Jean Delvare <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.