| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Because thermal_zone_trip_id() does not update the thermal zone object
passed to it, its pointer argument representing the thermal zone can be
const, so adjust its definition accordingly.
No functional impact.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Lukasz Luba <[email protected]>
|
|
Fix the following compile error:
.../bnxt.c: In function 'bnxt_cfg_ntp_filters':
.../bnxt.c:14077:37: error: implicit declaration of function 'rps_may_expire_flow' [-Werror=implicit-function-declaration]
14077 | if (rps_may_expire_flow(bp->dev, fltr->base.rxq,
| ^~~~~~~~~~~~~~~~~~~
bnxt_cfg_ntp_filters() is only used when CONFIG_RFS_ACCEL is enabled.
User configured ntuple filters are directly added and will not go through
this function. Wrap the body of bnxt_cfg_ntp_filters() with
CONFIG_RFS_ACCEL.
Fixes: 59cde76f33fa ("bnxt_en: Refactor filter insertion logic in bnxt_rx_flow_steer().")
Reported-by: Arnd Bergmann <[email protected]>
Link: https://lore.kernel.org/netdev/[email protected]/
Reported-by: kernel test robot <[email protected]>
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The 2 lines to check for the BNXT_HWRM_PF_UNLOAD_SP_EVENT bit was
mis-applied to bnxt_cfg_ntp_filters() and should have been applied to
bnxt_sp_task().
Fixes: 19241368443f ("bnxt_en: Send PF driver unload notification to all VFs.")
Reviewed-by: Andy Gospodarek <[email protected]>
Signed-off-by: Michael Chan <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
CSR.OPS bits specify the current operating mode and (according to
documentation) they are updated by HW when the operating mode change
request is processed. To comply with this check CSR.OPS before proceeding.
Commit introduces ravb_set_opmode() that does all the necessities for
setting the operating mode (set CCC.OPC (and CCC.GAC, CCC.CSEL, if any) and
wait for CSR.OPS) and call it where needed. This should comply with all the
HW manuals requirements as different manual variants specify that different
modes need to be checked in CSR.OPS when setting CCC.OPC.
If gPTP active in config mode is supported and it needs to be enabled, the
CCC.GAC and CCC.CSEL needs to be configured along with CCC.OPC in the same
write access. For this, ravb_set_opmode() allows passing GAC and CSEL as
part of opmode and the function updates accordingly CCC register.
Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper")
Signed-off-by: Claudiu Beznea <[email protected]>
Reviewed-by: Sergey Shtylyov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add check for usbnet_get_endpoints() and return the error if it fails
in order to transfer the error.
Fixes: 16626b0cc3d5 ("asix: Add a new driver for the AX88172A")
Signed-off-by: Chen Ni <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Jiawen Wu says:
====================
Implement more ethtool_ops for Wangxun
Provide ethtool functions to operate pause param, ring param, coalesce
channel number and msglevel, for driver txgbe/ngbe.
v6 -> v7:
- Rebase on net-next.
v5 -> v6:
- Minor fixes address on Jakub Kicinski's comments.
v4 -> v5:
- Fix build error reported by kernel test robot.
v3 -> v4:
- Repartition the patches of phylink.
- Handle failure to allocate memory while changing ring parameters.
- Minor fixes about formatting.
v2 -> v3:
- Address comments:
https://lore.kernel.org/all/[email protected]/
v1 -> v2:
- Add phylink support for ngbe.
- Fix issue on interrupts when queue number is changed.
- Add more marco defines.
- Fix return codes.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Add support to get and set msglevel for driver txgbe and ngbe.
Signed-off-by: Jiawen Wu <[email protected]>
Reviewed-by: Andrew Lunn <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add support to get RX/TX queue number with ethtool -l, and set RX/TX
queue number with ethtool -L. Since interrupts need to be rescheduled,
adjust the allocation of msix enties.
Signed-off-by: Jiawen Wu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Support to show RX/TX coalesce with ethtool -c and set RX/TX
coalesce with ethtool -C.
Signed-off-by: Jiawen Wu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Support to query RX/TX depth with ethtool -g, and change RX/TX depth
with ethtool -G.
Signed-off-by: Jiawen Wu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Add support to set pause params with ethtool -A and get pause
params with ethtool -a, for ethernet driver txgbe and ngbe.
Signed-off-by: Jiawen Wu <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Implement phylink in ngbe driver, to handle phy uniformly for Wangxun
ethernet devices.
Signed-off-by: Jiawen Wu <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Convert txgbe to use phylink and phylink_config added in libwx.
Signed-off-by: Jiawen Wu <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
For the following implementation, add struct phylink and phylink_config
to wx structure. Add the helper function for converting phylink to wx,
implement ethtool ksetting and nway reset in libwx.
Signed-off-by: Jiawen Wu <[email protected]>
Reviewed-by: Russell King (Oracle) <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
t-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-01-02 (ice)
This series contains updates to ice driver only.
Karol adds support for capable devices to receive timestamp via
interrupt rather than polling to allow for less delay.
Andrii adds support switchdev hardware packet mirroring.
Jake reworks VF rebuild to avoid destroying objects that do not need to
be.
Jan S removes reporting of rx_len_errors as they are incorrectly reported
by hardware.
Jan G adds const modifier to some uses that are applicable.
Kunwu Chan adds some checks for failed memory allocations.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
During QoS scheduling testing with multiple strict priority flows, the
netdev tx watchdog timeout routine is invoked when a low priority QoS
queue doesn't get a chance to transmit the packets because other high
priority flows are completely subscribing the transmit link. The netdev
tx watchdog timeout routine will stop MAC RX and TX functionality in
otx2_stop() routine before cleanup of HW TX queues which results in SMQ
flush errors because the packets belonging to low priority queues will
never gets flushed since MAC TX is disabled. This patch fixes the issue
by re-enabling MAC TX to ensure the packets in HW pipeline gets flushed
properly.
Fixes: a7faa68b4e7f ("octeontx2-af: Start/Stop traffic in CGX along with NPC")
Signed-off-by: Naveen Mamindlapalli <[email protected]>
Signed-off-by: Sunil Kovvuri Goutham <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently the NIX TX link credits are initialized based on the max frame
size that can be transmitted on a link but when the MTU is changed, the
NIX TX link credits are reprogrammed by the SW based on the new MTU value.
Since SMQ max packet length is programmed to max frame size by default,
there is a chance that NIX TX may stall while sending a max frame sized
packet on the link with insufficient credits to send the packet all at
once. This patch avoids stall issue by not changing the link credits
dynamically when the MTU is changed.
Fixes: 1c74b89171c3 ("octeontx2-af: Wait for TX link idle for credits change")
Signed-off-by: Naveen Mamindlapalli <[email protected]>
Signed-off-by: Sunil Kovvuri Goutham <[email protected]>
Signed-off-by: Nithin Kumar Dabilpuram <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Busy polling while holding the socket lock makes litle sense,
because incoming packets wont reach our receive queue.
Fixes: 8465a5fcd1ce ("sctp: add support for busy polling to sctp protocol")
Reported-by: Jacob Moroni <[email protected]>
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Marcelo Ricardo Leitner <[email protected]>
Cc: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When running the instruction decoder selftest with LLVM=1 and
CONFIG_PVH=y, there is a series of warnings:
arch/x86/tools/insn_decoder_test: warning: Found an x86 instruction decoder bug, please report this.
arch/x86/tools/insn_decoder_test: warning: ffffffff81000050 ea <unknown>
arch/x86/tools/insn_decoder_test: warning: objdump says 1 bytes, but insn_get_length() says 7
arch/x86/tools/insn_decoder_test: warning: Decoded and checked 7214721 instructions with 1 failures
GNU objdump outputs "(bad)" instead of "<unknown>", which is already
handled in the bad_expr regex, so there is no warning.
$ objdump -d arch/x86/platform/pvh/head.o | grep -E '50:\s+ea'
50: ea (bad)
$ llvm-objdump -d arch/x86/platform/pvh/head.o | grep -E '50:\s+ea'
50: ea <unknown>
Add "<unknown>" to the bad_expr regex to clear up the warning, allowing
the instruction decoder selftest to fully pass with llvm-objdump.
Signed-off-by: Nathan Chancellor <[email protected]>
Signed-off-by: Borislav Petkov (AMD) <[email protected]>
Link: https://lore.kernel.org/r/20231205-objdump_reformat-awk-handle-llvm-objdump-bad_expr-v1-1-b4a74f39396f@kernel.org
|
|
LEDs in 'HP ProBook 440 G6' laptop are controlled by ALC236 codec.
Enable already existing quirk 'ALC236_FIXUP_HP_MUTE_LED_MICMUTE_VREF'
to fix mute and mic-mute LEDs.
Signed-off-by: Siddhesh Dharme <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.7
I recently got a LibreTech Sapphire board for my CI and while
integrating it found and fixed some issues, including crashes for the
enum validation. There's also a couple of patches adding quirks for
another x86 laptop from Hans and an error handling fix for the Freescale
rpmsg driver.
|
|
Andrii Nakryiko says:
====================
Libbpf-side __arg_ctx fallback support
Support __arg_ctx global function argument tag semantics even on older kernels
that don't natively support it through btf_decl_tag("arg:ctx").
Patches #2-#6 are preparatory work to allow to postpone BTF loading into the
kernel until after all the BPF program relocations (including global func
appending to main programs) are done. Patch #4 is perhaps the most important
and establishes pre-created stable placeholder FDs, so that relocations can
embed valid map FDs into ldimm64 instructions.
Once BTF is done after relocation, what's left is to adjust BTF information to
have each main program's copy of each used global subprog to point to its own
adjusted FUNC -> FUNC_PROTO type chain (if they use __arg_ctx) in such a way
as to satisfy type expectations of BPF verifier regarding the PTR_TO_CTX
argument definition. See patch #8 for details.
Patch #8 adds few more __arg_ctx use cases (edge cases like multiple arguments
having __arg_ctx, etc) to test_global_func_ctx_args.c, to make it simple to
validate that this logic indeed works on old kernels. It does. But just to be
100% sure patch #9 adds a test validating that libbpf uploads func_info with
properly modified BTF data.
v2->v3:
- drop renaming patch (Alexei, Eduard);
- use memfd_create() instead of /dev/null for placeholder FD (Eduard);
- add one more test for validating BTF rewrite logic (Eduard);
- fixed wrong -errno usage, reshuffled some BTF rewrite bits (Eduard);
v1->v2:
- do internal functions renaming in patch #1 (Alexei);
- extract cloning of FUNC -> FUNC_PROTO information into separate function
(Alexei);
====================
Acked-by: Eduard Zingerman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add a test validating that libbpf uploads BTF and func_info with
rewritten type information for arguments of global subprogs that are
marked with __arg_ctx tag.
Suggested-by: Eduard Zingerman <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add a few extra cases of global funcs with context arguments. This time
rely on "arg:ctx" decl_tag (__arg_ctx macro), but put it next to
"classic" cases where context argument has to be of an exact type that
BPF verifier expects (e.g., bpf_user_pt_regs_t for kprobe/uprobe).
Colocating all these cases separately from other global func args that
rely on arg:xxx decl tags (in verifier_global_subprogs.c) allows for
simpler backwards compatibility testing on old kernels. All the cases in
test_global_func_ctx_args.c are supposed to work on older kernels, which
was manually validated during development.
Acked-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Out of all special global func arg tag annotations, __arg_ctx is
practically is the most immediately useful and most critical to have
working across multitude kernel version, if possible. This would allow
end users to write much simpler code if __arg_ctx semantics worked for
older kernels that don't natively understand btf_decl_tag("arg:ctx") in
verifier logic.
Luckily, it is possible to ensure __arg_ctx works on old kernels through
a bit of extra work done by libbpf, at least in a lot of common cases.
To explain the overall idea, we need to go back at how context argument
was supported in global funcs before __arg_ctx support was added. This
was done based on special struct name checks in kernel. E.g., for
BPF_PROG_TYPE_PERF_EVENT the expectation is that argument type `struct
bpf_perf_event_data *` mark that argument as PTR_TO_CTX. This is all
good as long as global function is used from the same BPF program types
only, which is often not the case. If the same subprog has to be called
from, say, kprobe and perf_event program types, there is no single
definition that would satisfy BPF verifier. Subprog will have context
argument either for kprobe (if using bpf_user_pt_regs_t struct name) or
perf_event (with bpf_perf_event_data struct name), but not both.
This limitation was the reason to add btf_decl_tag("arg:ctx"), making
the actual argument type not important, so that user can just define
"generic" signature:
__noinline int global_subprog(void *ctx __arg_ctx) { ... }
I won't belabor how libbpf is implementing subprograms, see a huge
comment next to bpf_object_relocate_calls() function. The idea is that
each main/entry BPF program gets its own copy of global_subprog's code
appended.
This per-program copy of global subprog code *and* associated func_info
.BTF.ext information, pointing to FUNC -> FUNC_PROTO BTF type chain
allows libbpf to simulate __arg_ctx behavior transparently, even if the
kernel doesn't yet support __arg_ctx annotation natively.
The idea is straightforward: each time we append global subprog's code
and func_info information, we adjust its FUNC -> FUNC_PROTO type
information, if necessary (that is, libbpf can detect the presence of
btf_decl_tag("arg:ctx") just like BPF verifier would do it).
The rest is just mechanical and somewhat painful BTF manipulation code.
It's painful because we need to clone FUNC -> FUNC_PROTO, instead of
reusing it, as same FUNC -> FUNC_PROTO chain might be used by another
main BPF program within the same BPF object, so we can't just modify it
in-place (and cloning BTF types within the same struct btf object is
painful due to constant memory invalidation, see comments in code).
Uploaded BPF object's BTF information has to work for all BPF
programs at the same time.
Once we have FUNC -> FUNC_PROTO clones, we make sure that instead of
using some `void *ctx` parameter definition, we have an expected `struct
bpf_perf_event_data *ctx` definition (as far as BPF verifier and kernel
is concerned), which will mark it as context for BPF verifier. Same
global subprog relocated and copied into another main BPF program will
get different type information according to main program's type. It all
works out in the end in a completely transparent way for end user.
Libbpf maintains internal program type -> expected context struct name
mapping internally. Note, not all BPF program types have named context
struct, so this approach won't work for such programs (just like it
didn't before __arg_ctx). So native __arg_ctx is still important to have
in kernel to have generic context support across all BPF program types.
Acked-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
With all the preparations in previous patches done we are ready to
postpone BTF loading and sanitization step until after all the
relocations are performed.
Acked-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Move the logic of finding and assigning exception callback indices from
BTF sanitization step to program relocations step, which seems more
logical and will unblock moving BTF loading to after relocation step.
Exception callbacks discovery and assignment has no dependency on BTF
being loaded into the kernel, it only uses BTF information. It does need
to happen before subprogram relocations happen, though. Which is why the
split.
No functional changes.
Acked-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Move map creation to later during BPF object loading by pre-creating
stable placeholder FDs (utilizing memfd_create()). Use dup2()
syscall to then atomically make those placeholder FDs point to real
kernel BPF map objects.
This change allows to delay BPF map creation to after all the BPF
program relocations. That, in turn, allows to delay BTF finalization and
loading into kernel to after all the relocations as well. We'll take
advantage of the latter in subsequent patches to allow libbpf to adjust
BTF in a way that helps with BPF global function usage.
Clean up a few places where we close map->fd, which now shouldn't
happen, because map->fd should be a valid FD regardless of whether map
was created or not. Surprisingly and nicely it simplifies a bunch of
error handling code. If this change doesn't backfire, I'm tempted to
pre-create such stable FDs for other entities (progs, maybe even BTF).
We previously did some manipulations to make gen_loader work with fake
map FDs, with stable map FDs this hack is not necessary for maps (we
still have it for BTF, but I left it as is for now).
Acked-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
With the upcoming switch to preallocated placeholder FDs for maps,
switch various getters/setter away from checking map->fd. Use
map_is_created() helper that detect whether BPF map can be modified based
on map->obj->loaded state, with special provision for maps set up with
bpf_map__reuse_fd().
For backwards compatibility, we take map_is_created() into account in
bpf_map__fd() getter as well. This way before bpf_object__load() phase
bpf_map__fd() will always return -1, just as before the changes in
subsequent patches adding stable map->fd placeholders.
We also get rid of all internal uses of bpf_map__fd() getter, as it's
more oriented for uses external to libbpf. The above map_is_created()
check actually interferes with some of the internal uses, if map FD is
fetched through bpf_map__fd().
Acked-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Instead of inferring whether map already point to previously
created/pinned BPF map (which user can specify with bpf_map__reuse_fd()) API),
use explicit map->reused flag that is set in such case.
Acked-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
It makes future grepping and code analysis a bit easier.
Acked-by: Jiri Olsa <[email protected]>
Signed-off-by: Andrii Nakryiko <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
kprobe_emulate_call_indirect
kprobe_emulate_call_indirect currently uses int3_emulate_call to emulate
indirect calls. However, int3_emulate_call always assumes the size of
the call to be 5 bytes when calculating the return address. This is
incorrect for register-based indirect calls in x86, which can be either
2 or 3 bytes depending on whether REX prefix is used. At kprobe runtime,
the incorrect return address causes control flow to land onto the wrong
place after return -- possibly not a valid instruction boundary. This
can lead to a panic like the following:
[ 7.308204][ C1] BUG: unable to handle page fault for address: 000000000002b4d8
[ 7.308883][ C1] #PF: supervisor read access in kernel mode
[ 7.309168][ C1] #PF: error_code(0x0000) - not-present page
[ 7.309461][ C1] PGD 0 P4D 0
[ 7.309652][ C1] Oops: 0000 [#1] SMP
[ 7.309929][ C1] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 6.7.0-rc5-trace-for-next #6
[ 7.310397][ C1] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.0-20220807_005459-localhost 04/01/2014
[ 7.311068][ C1] RIP: 0010:__common_interrupt+0x52/0xc0
[ 7.311349][ C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3
[ 7.312512][ C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046
[ 7.312899][ C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001
[ 7.313334][ C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4
[ 7.313702][ C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482
[ 7.314146][ C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023
[ 7.314509][ C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000
[ 7.314951][ C1] FS: 0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000
[ 7.315396][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7.315691][ C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0
[ 7.316153][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 7.316508][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 7.316948][ C1] Call Trace:
[ 7.317123][ C1] <IRQ>
[ 7.317279][ C1] ? __die_body+0x64/0xb0
[ 7.317482][ C1] ? page_fault_oops+0x248/0x370
[ 7.317712][ C1] ? __wake_up+0x96/0xb0
[ 7.317964][ C1] ? exc_page_fault+0x62/0x130
[ 7.318211][ C1] ? asm_exc_page_fault+0x22/0x30
[ 7.318444][ C1] ? __cfi_native_send_call_func_single_ipi+0x10/0x10
[ 7.318860][ C1] ? default_idle+0xb/0x10
[ 7.319063][ C1] ? __common_interrupt+0x52/0xc0
[ 7.319330][ C1] common_interrupt+0x78/0x90
[ 7.319546][ C1] </IRQ>
[ 7.319679][ C1] <TASK>
[ 7.319854][ C1] asm_common_interrupt+0x22/0x40
[ 7.320082][ C1] RIP: 0010:default_idle+0xb/0x10
[ 7.320309][ C1] Code: 4c 01 c7 4c 29 c2 e9 72 ff ff ff cc cc cc cc 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 66 90 0f 00 2d 09 b9 3b 00 fb f4 <fa> c3 0f 1f 00 90 90 90 90 90 90 90 90 90 90 90 b8 0c 67 40 a5 e9
[ 7.321449][ C1] RSP: 0018:ffffc9000009bee8 EFLAGS: 00000256
[ 7.321808][ C1] RAX: ffff88813bca8b68 RBX: 0000000000000001 RCX: 000000000001ef0c
[ 7.322227][ C1] RDX: 0000000000000000 RSI: 0000000000000001 RDI: 000000000001ef0c
[ 7.322656][ C1] RBP: ffffc9000009bef8 R08: 8000000000000000 R09: 00000000000008c2
[ 7.323083][ C1] R10: 0000000000000000 R11: ffffffff81058e70 R12: 0000000000000000
[ 7.323530][ C1] R13: ffff8881002b30c0 R14: 0000000000000000 R15: 0000000000000000
[ 7.323948][ C1] ? __cfi_lapic_next_deadline+0x10/0x10
[ 7.324239][ C1] default_idle_call+0x31/0x50
[ 7.324464][ C1] do_idle+0xd3/0x240
[ 7.324690][ C1] cpu_startup_entry+0x25/0x30
[ 7.324983][ C1] start_secondary+0xb4/0xc0
[ 7.325217][ C1] secondary_startup_64_no_verify+0x179/0x17b
[ 7.325498][ C1] </TASK>
[ 7.325641][ C1] Modules linked in:
[ 7.325906][ C1] CR2: 000000000002b4d8
[ 7.326104][ C1] ---[ end trace 0000000000000000 ]---
[ 7.326354][ C1] RIP: 0010:__common_interrupt+0x52/0xc0
[ 7.326614][ C1] Code: 01 00 4d 85 f6 74 39 49 81 fe 00 f0 ff ff 77 30 4c 89 f7 4d 8b 5e 68 41 ba 91 76 d8 42 45 03 53 fc 74 02 0f 0b cc ff d3 65 48 <8b> 05 30 c7 ff 7e 65 4c 89 3d 28 c7 ff 7e 5b 41 5c 41 5e 41 5f c3
[ 7.327570][ C1] RSP: 0018:ffffc900000e0fd0 EFLAGS: 00010046
[ 7.327910][ C1] RAX: 0000000000000001 RBX: 0000000000000023 RCX: 0000000000000001
[ 7.328273][ C1] RDX: 00000000000003cd RSI: 0000000000000001 RDI: ffff888100d302a4
[ 7.328632][ C1] RBP: 0000000000000001 R08: 0ef439818636191f R09: b1621ff338a3b482
[ 7.329223][ C1] R10: ffffffff81e5127b R11: ffffffff81059810 R12: 0000000000000023
[ 7.329780][ C1] R13: 0000000000000000 R14: ffff888100d30200 R15: 0000000000000000
[ 7.330193][ C1] FS: 0000000000000000(0000) GS:ffff88813bc80000(0000) knlGS:0000000000000000
[ 7.330632][ C1] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7.331050][ C1] CR2: 000000000002b4d8 CR3: 0000000003028003 CR4: 0000000000370ef0
[ 7.331454][ C1] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 7.331854][ C1] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[ 7.332236][ C1] Kernel panic - not syncing: Fatal exception in interrupt
[ 7.332730][ C1] Kernel Offset: disabled
[ 7.333044][ C1] ---[ end Kernel panic - not syncing: Fatal exception in interrupt ]---
The relevant assembly code is (from objdump, faulting address
highlighted):
ffffffff8102ed9d: 41 ff d3 call *%r11
ffffffff8102eda0: 65 48 <8b> 05 30 c7 ff mov %gs:0x7effc730(%rip),%rax
The emulation incorrectly sets the return address to be ffffffff8102ed9d
+ 0x5 = ffffffff8102eda2, which is the 8b byte in the middle of the next
mov. This in turn causes incorrect subsequent instruction decoding and
eventually triggers the page fault above.
Instead of invoking int3_emulate_call, perform push and jmp emulation
directly in kprobe_emulate_call_indirect. At this point we can obtain
the instruction size from p->ainsn.size so that we can calculate the
correct return address.
Link: https://lore.kernel.org/all/[email protected]/
Fixes: 6256e668b7af ("x86/kprobes: Use int3 instead of debug trap for single-step")
Cc: [email protected]
Signed-off-by: Jinghao Jia <[email protected]>
Signed-off-by: Masami Hiramatsu (Google) <[email protected]>
|
|
Yonghong Song says:
====================
bpf: Reduce memory usage for bpf_global_percpu_ma
Currently when a bpf program intends to allocate memory for percpu kptr,
the verifier will call bpf_mem_alloc_init() to prefill all supported
unit sizes and this caused memory consumption very big for large number
of cpus. For example, for 128-cpu system, the total memory consumption
with initial prefill is ~175MB. Things will become worse for systems
with even more cpus.
Patch 1 avoids unnecessary extra percpu memory allocation.
Patch 2 adds objcg to bpf_mem_alloc at init stage so objcg can be
associated with root cgroup and objcg can be passed to later
bpf_mem_alloc_percpu_unit_init().
Patch 3 addresses memory consumption issue by avoiding to prefill
with all unit sizes, i.e. only prefilling with user specified size.
Patch 4 further reduces memory consumption by limiting the
number of prefill entries for percpu memory allocation.
Patch 5 has much smaller low/high watermarks for percpu allocation
to reduce memory consumption.
Patch 6 rejects percpu memory allocation with bpf_global_percpu_ma
when allocation size is greater than 512 bytes.
Patch 7 fixed test_bpf_ma test due to Patch 5.
Patch 8 added one test to show the verification failure log message.
Changelogs:
v5 -> v6:
. Change bpf_mem_alloc_percpu_init() to add objcg as one of parameters.
For bpf_global_percpu_ma, the objcg is NULL, corresponding root memcg.
v4 -> v5:
. Do not do bpf_global_percpu_ma initialization at init stage, instead
doing initialization when the verifier knows it is going to be used
by bpf prog.
. Using much smaller low/high watermarks for percpu allocation.
v3 -> v4:
. Add objcg to bpf_mem_alloc during init stage.
. Initialize objcg at init stage but use it in bpf_mem_alloc_percpu_unit_init().
. Remove check_obj_size() in bpf_mem_alloc_percpu_unit_init().
v2 -> v3:
. Clear the bpf_mem_cache if prefill fails.
. Change test_bpf_ma percpu allocation tests to use bucket_size
as allocation size instead of bucket_size - 8.
. Remove __GFP_ZERO flag from __alloc_percpu_gfp() call.
v1 -> v2:
. Avoid unnecessary extra percpu memory allocation.
. Add a separate function to do bpf_global_percpu_ma initialization
. promote.
. Promote function static 'sizes' array to file static.
. Add comments to explain to refill only one item for percpu alloc.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Add a selftest to capture the verification failure when the allocation
size is greater than 512.
Acked-by: Hou Tao <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
In the previous patch, the maximum data size for bpf_global_percpu_ma
is 512 bytes. This breaks selftest test_bpf_ma. The test is adjusted
in two aspects:
- Since the maximum allowed data size for bpf_global_percpu_ma is
512, remove all tests beyond that, names sizes 1024, 2048 and 4096.
- Previously the percpu data size is bucket_size - 8 in order to
avoid percpu allocation into the next bucket. This patch removed
such data size adjustment thanks to Patch 1.
Also, a better way to generate BTF type is used than adding
a member to the value struct.
Acked-by: Hou Tao <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
For percpu data structure allocation with bpf_global_percpu_ma,
the maximum data size is 4K. But for a system with large
number of cpus, bigger data size (e.g., 2K, 4K) might consume
a lot of memory. For example, the percpu memory consumption
with unit size 2K and 1024 cpus will be 2K * 1K * 1k = 2GB
memory.
We should discourage such usage. Let us limit the maximum data
size to be 512 for bpf_global_percpu_ma allocation.
Acked-by: Hou Tao <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Currently, refill low/high marks are set with the assumption
of normal non-percpu memory allocation. For example, for
an allocation size 256, for non-percpu memory allocation,
low mark is 32 and high mark is 96, resulting in the
batch allocation of 48 elements and the allocated memory
will be 48 * 256 = 12KB for this particular cpu.
Assuming an 128-cpu system, the total memory consumption
across all cpus will be 12K * 128 = 1.5MB memory.
This might be okay for non-percpu allocation, but may not be
good for percpu allocation, which will consume 1.5MB * 128 = 192MB
memory in the worst case if every cpu has a chance of memory
allocation.
In practice, percpu allocation is very rare compared to
non-percpu allocation. So let us have smaller low/high marks
which can avoid unnecessary memory consumption.
Signed-off-by: Yonghong Song <[email protected]>
Acked-by: Hou Tao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Typically for percpu map element or data structure, once allocated,
most operations are lookup or in-place update. Deletion are really
rare. Currently, for percpu data strcture, 4 elements will be
refilled if the size is <= 256. Let us just do with one element
for percpu data. For example, for size 256 and 128 cpus, the
potential saving will be 3 * 256 * 128 * 128 = 12MB.
Acked-by: Hou Tao <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Commit 41a5db8d8161 ("Add support for non-fix-size percpu mem allocation")
added support for non-fix-size percpu memory allocation.
Such allocation will allocate percpu memory for all buckets on all
cpus and the memory consumption is in the order to quadratic.
For example, let us say, 4 cpus, unit size 16 bytes, so each
cpu has 16 * 4 = 64 bytes, with 4 cpus, total will be 64 * 4 = 256 bytes.
Then let us say, 8 cpus with the same unit size, each cpu
has 16 * 8 = 128 bytes, with 8 cpus, total will be 128 * 8 = 1024 bytes.
So if the number of cpus doubles, the number of memory consumption
will be 4 times. So for a system with large number of cpus, the
memory consumption goes up quickly with quadratic order.
For example, for 4KB percpu allocation, 128 cpus. The total memory
consumption will 4KB * 128 * 128 = 64MB. Things will become
worse if the number of cpus is bigger (e.g., 512, 1024, etc.)
In Commit 41a5db8d8161, the non-fix-size percpu memory allocation is
done in boot time, so for system with large number of cpus, the initial
percpu memory consumption is very visible. For example, for 128 cpu
system, the total percpu memory allocation will be at least
(16 + 32 + 64 + 96 + 128 + 196 + 256 + 512 + 1024 + 2048 + 4096)
* 128 * 128 = ~138MB.
which is pretty big. It will be even bigger for larger number of cpus.
Note that the current prefill also allocates 4 entries if the unit size
is less than 256. So on top of 138MB memory consumption, this will
add more consumption with
3 * (16 + 32 + 64 + 96 + 128 + 196 + 256) * 128 * 128 = ~38MB.
Next patch will try to reduce this memory consumption.
Later on, Commit 1fda5bb66ad8 ("bpf: Do not allocate percpu memory
at init stage") moved the non-fix-size percpu memory allocation
to bpf verificaiton stage. Once a particular bpf_percpu_obj_new()
is called by bpf program, the memory allocator will try to fill in
the cache with all sizes, causing the same amount of percpu memory
consumption as in the boot stage.
To reduce the initial percpu memory consumption for non-fix-size
percpu memory allocation, instead of filling the cache with all
supported allocation sizes, this patch intends to fill the cache
only for the requested size. As typically users will not use large
percpu data structure, this can save memory significantly.
For example, the allocation size is 64 bytes with 128 cpus.
Then total percpu memory amount will be 64 * 128 * 128 = 1MB,
much less than previous 138MB.
Signed-off-by: Yonghong Song <[email protected]>
Acked-by: Hou Tao <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
The objcg is a bpf_mem_alloc level property since all bpf_mem_cache's
are with the same objcg. This patch made such a property explicit.
The next patch will use this property to save and restore objcg
for percpu unit allocator.
Acked-by: Hou Tao <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Currently, for percpu memory allocation, say if the user
requests allocation size to be 32 bytes, the actually
calculated size will be 40 bytes and it further rounds
to 64 bytes, and eventually 64 bytes are allocated,
wasting 32-byte memory.
Change bpf_mem_alloc() to calculate the cache index
based on the user-provided allocation size so unnecessary
extra memory can be avoided.
Suggested-by: Hou Tao <[email protected]>
Acked-by: Hou Tao <[email protected]>
Signed-off-by: Yonghong Song <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Alexei Starovoitov <[email protected]>
|
|
Minor fix for kcm: code wanting to access the fields inside an skb
frag should use the skb_frag_*() helpers, instead of accessing the
fields directly.
Signed-off-by: Mina Almasry <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Minor fix for virtio: code wanting to access the fields inside an skb
frag should use the skb_frag_*() helpers, instead of accessing the
fields directly. This allows for extensions where the underlying
memory is not a page.
Acked-by: Stefano Garzarella <[email protected]>
Signed-off-by: Mina Almasry <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Implement conditional netlink notifications for Qdiscs and classes,
which were missing in the initial patches that targeted tc filters and
actions. Notifications will only be built after passing a check for
'rtnl_notify_needed()'.
For both Qdiscs and classes 'get' operations now call a dedicated
notification function as it was not possible to distinguish between
'create' and 'get' before. This distinction is necessary because 'get'
always send a notification.
Signed-off-by: Pedro Tammela <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Bound actions always return '0' and as of today we rely on '0'
being returned in order to properly skip bound actions in
tcf_idr_insert_many. In order to further improve maintainability,
introduce the ACT_P_BOUND return code.
Actions are updated to return 'ACT_P_BOUND' instead of plain '0'.
tcf_idr_insert_many is then updated to check for 'ACT_P_BOUND'.
Signed-off-by: Pedro Tammela <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
xdp_prog is used in receive path, both from XDP enabled drivers
and from netif_elide_gro().
This patch also removes two 4-bytes holes.
Fixes: 43a71cd66b9c ("net-device: reorganize net_device fast path variables")
Signed-off-by: Eric Dumazet <[email protected]>
Cc: Coco Li <[email protected]>
Cc: Simon Horman <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue
Tony Nguyen says:
====================
Intel Wired LAN Driver Updates 2024-01-02 (ixgbe, i40e)
This series contains updates to ixgbe and i40e drivers.
Ovidiu Panait adds reporting of VF link state to ixgbe.
Jedrzej removes uses of IXGBE_ERR* codes to instead use standard error
codes.
Andrii modifies behavior of VF disable to properly shut down queues on
i40e.
Simon Horman removes, undesired, use of comma operator for i40e.
* '10GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
i40e: Avoid unnecessary use of comma operator
i40e: Fix VF disable behavior to block all traffic
ixgbe: Refactor returning internal error codes
ixgbe: Refactor overtemp event handling
ixgbe: report link state for VF devices
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following patchset contains Netfilter fixes for net:
1) Fix nat packets in the related state in OVS, from Brad Cowie.
2) Drop chain reference counter on error path in case chain binding
fails.
* tag 'nf-24-01-03' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nft_immediate: drop chain reference counter on error
netfilter: nf_nat: fix action not being set for all ct states
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
David Arinzon says:
====================
ENA driver XDP changes
This patchset contains multiple XDP-related changes
in the ENA driver, including moving the XDP code to
dedicated files.
====================
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Queue stats using ifconfig and ip are retrieved
via ena_get_stats64(). This function currently does not take
the xdp sent or dropped packets stats into account.
This commit adds the following xdp stats to ena_get_stats64():
tx bytes sent
tx packets sent
rx dropped packets
Signed-off-by: Arthur Kiyanovski <[email protected]>
Signed-off-by: David Arinzon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|