| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
While at it, let re-arrange the struct to remove holes.
Before, pahole reports
/* size: 232, cachelines: 4, members: 17 */
/* sum members: 224, holes: 2, sum holes: 8 */
/* last cacheline: 40 bytes */
After the change, the report changes to
/* size: 224, cachelines: 4, members: 17 */
/* last cacheline: 32 bytes */
Acked-by: Jack Wang <[email protected]>
Signed-off-by: Guoqing Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Previously, both map and remap trigger rnbd_clt_set_dev_attr to set
some members in rnbd_clt_dev such as wc, fua and logical_block_size
etc, but those members are only useful for map scenario given the
setup_request_queue is only called from the path:
rnbd_clt_map_device -> rnbd_client_setup_device
Since rnbd_clt_map_device frees rsp after rnbd_client_setup_device,
we can pass rsp to rnbd_client_setup_device and it's callees, which
means queue's attributes can be set directly from relevant members
of rsp instead from rnbd_clt_dev.
After that, we can kill 11 members from rnbd_clt_dev, and we don't
need rnbd_clt_set_dev_attr either.
Acked-by: Jack Wang <[email protected]>
Signed-off-by: Guoqing Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
The member is not needed since we can call get_disk_ro to achieve the
same goal.
Acked-by: Jack Wang <[email protected]>
Signed-off-by: Guoqing Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
For map scenario, rsp is freed in two places:
1. msg_open_conf frees rsp if rtrs_clt_request returns 0.
2. Otherwise, rsp is freed by the call sites of rtrs_clt_request.
Now, We'd like to control full lifecycle of rsp in rnbd_clt_map_device,
with that, it is feasible to pass rsp to rnbd_client_setup_device in
next commit.
For 1, it is possible to free rsp from the caller of send_usr_msg
because of the synchronization of iu->comp.wait. And we put iu later
in rnbd_clt_map_device to ensure order of release rsp and iu.
Acked-by: Jack Wang <[email protected]>
Signed-off-by: Guoqing Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Let's open code it in rnbd_clt_map_device, then we can use information
from rsp to setup gendisk and request_queue in next commits. After that,
we can remove some members (wc, fua and max_hw_sectors etc) from struct
rnbd_clt_dev.
Acked-by: Jack Wang <[email protected]>
Signed-off-by: Guoqing Jiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Use bitmap_zalloc()/bitmap_free() instead of hand-writing them.
It is less verbose and it improves the semantic.
Signed-off-by: Christophe JAILLET <[email protected]>
Link: https://lore.kernel.org/r/7c4d3116ba843fc4a8ae557dd6176352a6cd0985.1656864320.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jens Axboe <[email protected]>
|
|
There are 2 spelling mistakes in comments. Fix it.
Signed-off-by: Zhang Jiaming <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The block layer defaults the maximum segments to 128, which means
requests tend to get split around the 512KB depending on how many
pages can be merged. There's no such restriction in the raid5 code
so increase the limit to USHRT_MAX so that larger requests can be
sent as one.
Signed-off-by: Logan Gunthorpe <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Add a debug print for raid5_make_request() so that each request is
printed and add the logical sector number to the debug print in
__add_stripe_bio().
Signed-off-by: Logan Gunthorpe <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
raid5_make_request() loops through every page in the request,
finds the appropriate stripe and adds the bio for that page in the
disk.
This causes a great deal of contention on the hash_lock and extra
work seeing each stripe must be found once for every data disk.
The number of times a stripe must be found can be reduced by pivoting
raid5_make_request() so that it loops through every stripe and then
loops through every disk in that stripe to see if the bio must be
added. This reduces the number of times the hash lock must be taken
by a factor equal to the number of data disks.
To accomplish this, the logical sectors that have already been added
must be tracked. Tracking them is done with a bitmap: the bits
for all pages are set at the start of the request and each bit
is cleared once the bio is added to a stripe.
Finding the next sector to be done is then just a call to
find_first_bit() so that sectors that have been done can simply be
skipped.
One minor downside is that the maximum sectors for a request must be
limited so that the bitmap can be appropriately sized on the stack.
This limit is arbitrarily chosen to be 256 stripe pages which works out
to 1MB if PAGE_SIZE == DEFAULT_STRIPE_SIZE. This doesn't actually
restrict the maximum request further seeing the default block queue
settings are used which restricts the number of segments to 128 (which
results in request sizes that are approximately 512KB).
Signed-off-by: Logan Gunthorpe <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
When testing if a previous stripe has had reshape expand past it, use
the earliest or latest logical sector in all the disks for that stripe
head. This will allow adding multiple disks at a time in a subesquent
patch.
To do this cleaner, refactor the check into a helper function called
stripe_ahead_of_reshape().
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Factor out two helper functions from add_stripe_bio(): one to check for
overlap (stripe_bio_overlaps()), and one to actually add the bio to the
stripe (__add_stripe_bio()). The latter function will always succeed.
This will be useful in the next patch so that overlap can be checked for
multiple disks before adding any
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
When batching, every stripe head has to find the previous stripe head to
add to the batch list. This involves taking the hash lock which is
highly contended during IO.
Instead of finding the previous stripe_head each time, store a
reference to the previous stripe_head in a pointer so that it doesn't
require taking the contended lock another time.
The reference to the previous stripe must be released before scheduling
and waiting for work to get done. Otherwise, it can hold up
raid5_activate_delayed() and deadlock.
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Guoqing Jiang <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The for loop with retry label can be more cleanly expressed as a while
loop by moving the logical_sector increment into the success path.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Now that prepare_to_wait() isn't in the way, move read_sequcount_begin()
into make_stripe_request().
No functional changes intended.
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Guoqing Jiang <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
prepare_to_wait() can be reasonably called after schedule instead of
setting a flag and preparing in the next loop iteration.
This means that prepare_to_wait() will be called before
read_seqcount_begin(), but there shouldn't be any reason that the order
matters here. On the first iteration of the loop prepare_to_wait() is
already called first.
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Guoqing Jiang <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Factor out the inner loop of raid5_make_request() into it's own helper
called make_stripe_request().
The helper returns a number of statuses: SUCCESS, RETRY,
SCHEDULE_AND_RETRY and FAIL. This makes the code a bit easier to
understand and allows the SCHEDULE_AND_RETRY path to be made common.
A context structure is added to contain do_flush. It will be used
more in subsequent patches for state that needs to be kept
outside the loop.
No functional changes intended. This will be cleaned up further in
subsequent patches to untangle the gen_lock and do_prepare logic
further.
Signed-off-by: Logan Gunthorpe <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Both uses of find_stripe() require a fairly complicated dance to
increment the reference count. Move this into a common find_get_stripe()
helper.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Acked-by: Guoqing Jiang <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
stripe_add_to_batch_list() is better done in the loop in make_request
instead of inside add_stripe_bio(). This is clearer and allows for
storing the batch_head state outside the loop in a subsequent patch.
The call to add_stripe_bio() in retry_aligned_read() is for read
and batching only applies to write. So it's impossible for batching
to happen at that call site.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Guoqing Jiang <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Break immediately if raid5_get_active_stripe() returns NULL and deindent
the rest of the loop. Annotate this check with an unlikely().
This makes the code easier to read and reduces the indentation level.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Reviewed-by: Guoqing Jiang <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
There are a few uses of an ugly ternary operator in raid5_make_request()
to check if a sector is a head of a reshape sector.
Factor this out into a simple helper called ahead_of_reshape().
No functional changes intended.
Suggested-by: Christoph Hellwig <[email protected]>
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The check in raid5_make_request differs very slightly from the logic
that causes it to block lower down. This likely does not cause a bug
as the check is fuzzy anyway (as reshape may move on between the first
check and the subsequent check). However, make it consistent so it can
be cleaned up in a subsequent patch.
The condition which causes the schedule is:
!(mddev->reshape_backwards ? logical_sector < conf->reshape_progress :
logical_sector >= conf->reshape_progress) &&
(mddev->reshape_backwards ? logical_sector < conf->reshape_safe :
logical_sector >= conf->reshape_safe)
The condition that causes the early bailout is made to match this.
Signed-off-by: Logan Gunthorpe <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Since the bug which commit 8b48ec23cc51a ("md: don't unregister sync_thread
with reconfig_mutex held") fixed is related with action_store path, other
callers which reap sync_thread didn't need to be changed.
Let's pull md_unregister_thread from md_reap_sync_thread, then fix previous
bug with belows.
1. unlock mddev before md_reap_sync_thread in action_store.
2. save reshape_position before unlock, then restore it to ensure position
not changed accidentally by others.
Signed-off-by: Guoqing Jiang <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Boot-time assembly of arrays with md= command-line arguments breaks when
CONFIG_BLOCK_LEGACY_AUTOLOAD is unset. md_setup_drive() in md-autodetect.c
calls blkdev_get_by_dev(), assuming this implicitly creates the block
device.
Fix this by attempting to md_alloc() the array first. As in the probe path,
ignore any error as failure is caught by blkdev_get_by_dev() anyway.
Signed-off-by: Chris Webb <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The mdadm test 07layouts randomly produces a kernel hung task deadlock.
The deadlock is caused by the suspend_lo/suspend_hi files being set by
the mdadm background process during reshape and not being cleared
because the process hangs. (Leaving aside the issue of the fragility of
freezing kernel tasks by buggy userspace processes...)
When the background mdadm process hangs it, is waiting (without a
timeout) on a change to the sync_completed file signalling that the
reshape has completed. The process is woken up a couple times when
the reshape finishes but it is woken up before MD_RECOVERY_RUNNING
is cleared so sync_completed_show() reports 0 instead of "none".
To fix this, notify the sysfs file in md_reap_sync_thread() after
MD_RECOVERY_RUNNING has been cleared. This wakes up mdadm and causes
it to continue and write to suspend_lo/suspend_hi to allow IO to
continue.
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The 07layouts test in mdadm fails on some systems. The failure
presents itself as the backup file not being removed before the next
layout is grown into:
mdadm: /dev/md0: cannot create backup file /tmp/md-test-backup:
File exists
This is because the background mdadm process, which is responsible for
cleaning up this backup file gets into an infinite loop waiting for
the reshape to start. mdadm checks the mdstat file if a reshape is
going and, if it is not, it waits for an event on the file or times
out in 5 seconds. On faster machines, the reshape may complete before
the 5 seconds times out, and thus the background mdadm process loops
waiting for a reshape to start that has already occurred.
mdadm reads the mdstat file to start, but mdstat does not report that the
reshape has begun, even though it has indeed begun. So the mdstat_wait()
call (in mdadm) which polls on the mdstat file won't ever return until
timing out.
The reason mdstat reports the reshape has started is due to an issue
in status_resync(). recovery_active is subtracted from curr_resync which
will result in a value of zero for the first chunk of reshaped data, and
the resulting read will report no reshape in progress.
To fix this, if "resync - recovery_active" is an overloaded value, force
the value to be MD_RESYNC_ACTIVE so the code reports a resync in progress.
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Comments in the code document special values used for
mddev->curr_resync. Make this clearer by using an enum to label these
values.
The only functional change is a couple places use the wrong comparison
operator that implied 3 is another special value. They are all
fixed to imply that 3 or greater is an active resync.
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
radix_tree_lookup_slot() and radix_tree_replace_slot() API expect the
slot returned and looked up to be marked with __rcu. Otherwise
sparse warnings are generated:
drivers/md/raid5-cache.c:2939:23: warning: incorrect type in
assignment (different address spaces)
drivers/md/raid5-cache.c:2939:23: expected void **pslot
drivers/md/raid5-cache.c:2939:23: got void [noderef] __rcu **
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
A NULL pointer dereferlence on conf->log is seen randomly with
the mdadm test 21raid5cache. Kasan reporst:
BUG: KASAN: null-ptr-deref in r5l_reclaimable_space+0xf5/0x140
Read of size 8 at addr 0000000000000860 by task md0_reclaim/3086
Call Trace:
dump_stack_lvl+0x5a/0x74
kasan_report.cold+0x5f/0x1a9
__asan_load8+0x69/0x90
r5l_reclaimable_space+0xf5/0x140
r5l_do_reclaim+0xf4/0x5e0
r5l_reclaim_thread+0x69/0x3b0
md_thread+0x1a2/0x2c0
kthread+0x177/0x1b0
ret_from_fork+0x22/0x30
This is caused by conf->log being cleared in r5l_exit_log() before
stopping the reclaim thread.
To fix this, clear conf->log after the reclaim_thread is unregistered
and after flushing disable_writeback_work.
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The only place that uses RCU to access conf->log is in
r5l_log_disk_error(). This function is mostly used in the IO path
and once with mddev_lock() held in raid5_change_consistency_policy().
It is known that the IO will be suspended before the log is freed and
r5l_log_exit() is called with the mddev_lock() held.
This should mean that conf->log can not be freed while the function is
being called, so the RCU protection is not necessary. Drop the
rcu_read_lock() as well as the synchronize_rcu() and
rcu_assign_pointer() usage.
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The mddev->lock spinlock doesn't protect against the removal of
conf->log in r5l_exit_log() so conf->log may be freed before it
is used.
To fix this, take the mddev_lock() insteaad of the mddev->lock spinlock.
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The raid5-cache code relies on there being no IO in flight when
log_exit() is called. There are two places where this is not
guaranteed so add mddev_suspend() and mddev_resume() calls to these
sites.
The site in raid5_change_consistency_policy() is in the error path,
and another similar call site already has suspend/resume calls just
below it; so it should be equally safe to make that change here.
There is one remaining site in raid5_remove_disk() that we call log_exit()
without suspending the array. Unfortunately, as the comment stated, we
cannot call mddev_suspend from raid5d.
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
ppl_handle_flush_request() takes an struct r5log argument but doesn't
use it. It has no buisiness taking this argument as it is only used
by raid5-cache and has no way to derference it anyway. Remove
the argument.
No functional changes intended.
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
extern is not necessary and recommended against when defining prototype
functions in headers. checkpatch.pl complains about these. So remove
them.
Signed-off-by: Logan Gunthorpe <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Add link to patchwork:
https://patchwork.kernel.org/project/linux-raid/list/
Signed-off-by: Song Liu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
We usually do all our bitmap IO in units of PAGE_SIZE.
With very small or oddly sized external meta data, or with
PAGE_SIZE != 4k, it can happen that our last on-disk bitmap page
is not fully PAGE_SIZE aligned, so we may need to adjust the size
of the IO.
We used to do that with
min_t(unsigned int, PAGE_SIZE,
last_allowed_sector - current_offset);
And for just the right diff, (unsigned int)(diff) will result in 0.
A bio of length 0 will correctly be rejected with an IO error
(and some scary WARN_ON_ONCE()) by the scsi layer.
Do the calculation properly.
Signed-off-by: Lars Ellenberg <[email protected]>
Signed-off-by: Christoph Böhmwalder <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
The commit a1a2b7125e10 ("of/platform: Drop static setup of IRQ
resource from DT core") stopped IRQ resources being available as
platform resources. This broke the sanity check for the expected
number of resources in the Marvell SATA driver which expected two
resources, the IO memory and the interrupt.
Change the sanity check to only expect the IO memory.
Cc: Lad Prabhakar <[email protected]>
Fixes: a1a2b7125e10 ("of/platform: Drop static setup of IRQ resource from DT core")
Cc: <[email protected]>
Signed-off-by: Andrew Lunn <[email protected]>
Signed-off-by: Damien Le Moal <[email protected]>
|
|
git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt
Pull fsverity update from Eric Biggers:
"Just a small documentation update to mention the btrfs support"
* tag 'fsverity-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/fscrypt:
fs-verity: mention btrfs support
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar:
"Aside from the one EVM cleanup patch, all the other changes are kexec
related.
On different architectures different keyrings are used to verify the
kexec'ed kernel image signature. Here are a number of preparatory
cleanup patches and the patches themselves for making the keyrings -
builtin_trusted_keyring, .machine, .secondary_trusted_keyring, and
.platform - consistent across the different architectures"
* tag 'integrity-v6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
kexec, KEYS, s390: Make use of built-in and secondary keyring for signature verification
arm64: kexec_file: use more system keyrings to verify kernel image signature
kexec, KEYS: make the code in bzImage64_verify_sig generic
kexec: clean up arch_kexec_kernel_verify_sig
kexec: drop weak attribute from functions
kexec_file: drop weak attribute from functions
evm: Use IS_ENABLED to initialize .enabled
|
|
Pull SafeSetID updates from Micah Morton:
"This contains one commit that touches common kernel code, one that
adds functionality internal to the SafeSetID LSM code, and a few other
commits that only modify the SafeSetID LSM selftest.
The commit that touches common kernel code simply adds an LSM hook in
the setgroups() syscall that mirrors what is done for the existing LSM
hooks in the setuid() and setgid() syscalls. This commit combined with
the SafeSetID-specific one allow the LSM to filter setgroups() calls
according to configured rule sets in the same way that is already done
for setuid() and setgid()"
* tag 'safesetid-6.0' of https://github.com/micah-morton/linux:
LSM: SafeSetID: add setgroups() testing to selftest
LSM: SafeSetID: Add setgroups() security policy handling
security: Add LSM hook to setgroups() syscall
LSM: SafeSetID: add GID testing to selftest
LSM: SafeSetID: selftest cleanup and prepare for GIDs
LSM: SafeSetID: fix userns bug in selftest
|
|
Pull msack updates from Casey Schaufler:
"Two minor code clean-ups for Smack.
One removes a touch of dead code and the other replaces an instance of
kzalloc + strncpy with kstrndup"
* tag 'Smack-for-6.0' of https://github.com/cschaufler/smack-next:
smack: Remove the redundant lsm_inode_alloc
smack: Replace kzalloc + strncpy with kstrndup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm
Pull LSM update from Paul Moore:
"A maintainer change for the LSM layer: James has asked me to take over
the day-to-day responsibilities so a single patch to update the
MAINTAINER info"
* tag 'lsm-pr-20220801' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/lsm:
MAINTAINERS: update the LSM maintainer info
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Two minor audit patches: on marks a function as static, the other
removes a redundant length check"
* tag 'audit-pr-20220801' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: make is_audit_feature_set() static
audit: remove redundant data_len check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux updates from Paul Moore:
"A relatively small set of patches for SELinux this time, eight patches
in total with really only one significant change.
The highlights are:
- Add support for proper labeling of memfd_secret anonymous inodes.
This will allow LSMs that implement the anonymous inode hooks to
apply security policy to memfd_secret() fds.
- Various small improvements to memory management: fixed leaks, freed
memory when needed, boundary checks.
- Hardened the selinux_audit_data struct with __randomize_layout.
- A minor documentation tweak to fix a formatting/style issue"
* tag 'selinux-pr-20220801' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: selinux_add_opt() callers free memory
selinux: Add boundary check in put_entry()
selinux: fix memleak in security_read_state_kernel()
docs: selinux: add '=' signs to kernel boot options
mm: create security context for memfd_secret inodes
selinux: fix typos in comments
selinux: drop unnecessary NULL check
selinux: add __randomize_layout to selinux_audit_data
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Fix Sparse warnings with randomizd kstack (GONG, Ruiqi)
- Replace uintptr_t with unsigned long in usercopy (Jason A. Donenfeld)
- Fix Clang -Wforward warning in LKDTM (Justin Stitt)
- Fix comment to correctly refer to STRICT_DEVMEM (Lukas Bulwahn)
- Introduce dm-verity binding logic to LoadPin LSM (Matthias Kaehlcke)
- Clean up warnings and overflow and KASAN tests (Kees Cook)
* tag 'hardening-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
dm: verity-loadpin: Drop use of dm_table_get_num_targets()
kasan: test: Silence GCC 12 warnings
drivers: lkdtm: fix clang -Wformat warning
x86: mm: refer to the intended config STRICT_DEVMEM in a comment
dm: verity-loadpin: Use CONFIG_SECURITY_LOADPIN_VERITY for conditional compilation
LoadPin: Enable loading from trusted dm-verity devices
dm: Add verity helpers for LoadPin
stack: Declare {randomize_,}kstack_offset to fix Sparse warnings
lib: overflow: Do not define 64-bit tests on 32-bit
MAINTAINERS: Add a general "kernel hardening" section
usercopy: use unsigned long instead of uintptr_t
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull execve updates from Kees Cook:
- Allow unsharing time namespace on vfork+exec (Andrei Vagin)
- Replace usage of deprecated kmap APIs (Fabio M. De Francesco)
- Fix spelling mistake (Zhang Jiaming)
* tag 'execve-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
exec: Call kmap_local_page() in copy_string_kernel()
exec: Fix a spelling mistake
selftests/timens: add a test for vfork+exit
fs/exec: allow to unshare a time namespace on vfork+exec
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull seccomp update from Kees Cook:
- Fix Clang build warning (YiFei Zhu)
* tag 'seccomp-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
selftests/seccomp: Fix compile warning when CC=clang
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull pstore updates from Kees Cook:
- Migrate to modern acomp crypto interface (Ard Biesheuvel)
- Use better return type for "rcnt" (Dan Carpenter)
* tag 'pstore-v5.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
pstore/zone: cleanup "rcnt" type
pstore: migrate to crypto acomp interface
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mike Snitzer:
- Refactor DM core's mempool allocation so that it clearer by not being
split acorss files.
- Improve DM core's BLK_STS_DM_REQUEUE and BLK_STS_AGAIN handling.
- Optimize DM core's more common bio splitting by eliminating the use
of bio cloning with bio_split+bio_chain. Shift that cloning cost to
the relatively unlikely dm_io requeue case that only occurs during
error handling. Introduces dm_io_rewind() that will clone a bio that
reflects the subset of the original bio that must be requeued.
- Remove DM core's dm_table_get_num_targets() wrapper and audit all
dm_table_get_target() callers.
- Fix potential for OOM with DM writecache target by setting a default
MAX_WRITEBACK_JOBS (set to 256MiB or 1/16 of total system memory,
whichever is smaller).
- Fix DM writecache target's stats that are reported through
DM-specific table info.
- Fix use-after-free crash in dm_sm_register_threshold_callback().
- Refine DM core's Persistent Reservation handling in preparation for
broader work Mike Christie is doing to add compatibility with
Microsoft Windows Failover Cluster.
- Fix various KASAN reported bugs in the DM raid target.
- Fix DM raid target crash due to md_handle_request() bio splitting
that recurses to block core without properly initializing the bio's
bi_dev.
- Fix some code comment typos and fix some Documentation formatting.
* tag 'for-6.0/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (29 commits)
dm: fix dm-raid crash if md_handle_request() splits bio
dm raid: fix address sanitizer warning in raid_resume
dm raid: fix address sanitizer warning in raid_status
dm: Start pr_preempt from the same starting path
dm: Fix PR release handling for non All Registrants
dm: Start pr_reserve from the same starting path
dm: Allow dm_call_pr to be used for path searches
dm: return early from dm_pr_call() if DM device is suspended
dm thin: fix use-after-free crash in dm_sm_register_threshold_callback
dm writecache: count number of blocks discarded, not number of discard bios
dm writecache: count number of blocks written, not number of write bios
dm writecache: count number of blocks read, not number of read bios
dm writecache: return void from functions
dm kcopyd: use __GFP_HIGHMEM when allocating pages
dm writecache: set a default MAX_WRITEBACK_JOBS
Documentation: dm writecache: Render status list as list
Documentation: dm writecache: add blank line before optional parameters
dm snapshot: fix typo in snapshot_map() comment
dm raid: remove redundant "the" in parse_raid_params() comment
dm cache: fix typo in 2 comment blocks
...
|
|
Like the normal 'perf lock contention' output, it'd print the number of
lost entries for BPF if exists or -v option is passed.
Currently it uses BROKEN_CONTENDED stat for the lost count (due to full
stack maps).
$ sudo perf lock con -a -b --map-nr-entries 128 sleep 5
...
=== output for debug===
bad: 43, total: 14903
bad rate: 0.29 %
histogram of events caused bad sequence
acquire: 0
acquired: 0
contended: 43
release: 0
Signed-off-by: Namhyung Kim <[email protected]>
Cc: Blake Jones <[email protected]>
Cc: Boqun Feng <[email protected]>
Cc: Davidlohr Bueso <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Waiman Long <[email protected]>
Cc: Will Deacon <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|