aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2024-03-18Revert "net: Re-use and set mono_delivery_time bit for userspace tstamp packets"Abhishek Chauhan6-10/+6
This reverts commit 885c36e59f46375c138de18ff1692f18eff67b7f. The patch currently broke the bpf selftest test_tc_dtime because uapi field __sk_buff->tstamp_type depends on skb->mono_delivery_time which does not necessarily mean mono with the original fix as the bit was re-used for userspace timestamp as well to avoid tstamp reset in the forwarding path. To solve this we need to keep mono_delivery_time as is and introduce another bit called user_delivery_time and fall back to the initial proposal of setting the user_delivery_time bit based on sk_clockid set from userspace. Fixes: 885c36e59f46 ("net: Re-use and set mono_delivery_time bit for userspace tstamp packets") Link: https://lore.kernel.org/netdev/[email protected]/ Signed-off-by: Abhishek Chauhan <[email protected]> Acked-by: Daniel Borkmann <[email protected]> Acked-by: Martin KaFai Lau <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-03-18net: dsa: mt7530: prevent possible incorrect XTAL frequency selectionArınç ÜNAL1-10/+4
On MT7530, the HT_XTAL_FSEL field of the HWTRAP register stores a 2-bit value that represents the frequency of the crystal oscillator connected to the switch IC. The field is populated by the state of the ESW_P4_LED_0 and ESW_P4_LED_0 pins, which is done right after reset is deasserted. ESW_P4_LED_0 ESW_P3_LED_0 Frequency ----------------------------------------- 0 0 Reserved 0 1 20MHz 1 0 40MHz 1 1 25MHz On MT7531, the XTAL25 bit of the STRAP register stores this. The LAN0LED0 pin is used to populate the bit. 25MHz when the pin is high, 40MHz when it's low. These pins are also used with LEDs, therefore, their state can be set to something other than the bootstrapping configuration. For example, a link may be established on port 3 before the DSA subdriver takes control of the switch which would set ESW_P3_LED_0 to high. Currently on mt7530_setup() and mt7531_setup(), 1000 - 1100 usec delay is described between reset assertion and deassertion. Some switch ICs in real life conditions cannot always have these pins set back to the bootstrapping configuration before reset deassertion in this amount of delay. This causes wrong crystal frequency to be selected which puts the switch in a nonfunctional state after reset deassertion. The tests below are conducted on an MT7530 with a 40MHz crystal oscillator by Justin Swartz. With a cable from an active peer connected to port 3 before reset, an incorrect crystal frequency (0b11 = 25MHz) is selected: [1] [3] [5] : : : _____________________________ __________________ ESW_P4_LED_0 |_______| _____________________________ ESW_P3_LED_0 |__________________________ : : : : : : [4]...: : : [2]................: [1] Reset is asserted. [2] Period of 1000 - 1100 usec. [3] Reset is deasserted. [4] Period of 315 usec. HWTRAP register is populated with incorrect XTAL frequency. [5] Signals reflect the bootstrapped configuration. Increase the delay between reset_control_assert() and reset_control_deassert(), and gpiod_set_value_cansleep(priv->reset, 0) and gpiod_set_value_cansleep(priv->reset, 1) to 5000 - 5100 usec. This amount ensures a higher possibility that the switch IC will have these pins back to the bootstrapping configuration before reset deassertion. With a cable from an active peer connected to port 3 before reset, the correct crystal frequency (0b10 = 40MHz) is selected: [1] [2-1] [3] [5] : : : : _____________________________ __________________ ESW_P4_LED_0 |_______| ___________________ _______ ESW_P3_LED_0 |_________| |__________________ : : : : : : [2-2]...: [4]...: [2]................: [1] Reset is asserted. [2] Period of 5000 - 5100 usec. [2-1] ESW_P3_LED_0 goes low. [2-2] Remaining period of 5000 - 5100 usec. [3] Reset is deasserted. [4] Period of 310 usec. HWTRAP register is populated with bootstrapped XTAL frequency. [5] Signals reflect the bootstrapped configuration. ESW_P3_LED_0 low period before reset deassertion: 5000 usec - 5100 usec TEST RESET HOLD # (usec) --------------------- 1 5410 2 5440 3 4375 4 5490 5 5475 6 4335 7 4370 8 5435 9 4205 10 4335 11 3750 12 3170 13 4395 14 4375 15 3515 16 4335 17 4220 18 4175 19 4175 20 4350 Min 3170 Max 5490 Median 4342.500 Avg 4466.500 Revert commit 2920dd92b980 ("net: dsa: mt7530: disable LEDs before reset"). Changing the state of pins via reset assertion is simpler and more efficient than doing so by setting the LED controller off. Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch") Fixes: c288575f7810 ("net: dsa: mt7530: Add the support of MT7531 switch") Co-developed-by: Justin Swartz <[email protected]> Signed-off-by: Justin Swartz <[email protected]> Signed-off-by: Arınç ÜNAL <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-03-18Merge branch 'veth-xdp-gro'David S. Miller3-21/+25
Ignat Korchagin says: ==================== net: veth: ability to toggle GRO and XDP independently It is rather confusing that GRO is automatically enabled, when an XDP program is attached to a veth interface. Moreover, it is not possible to disable GRO on a veth, if an XDP program is attached (which might be desirable in some use cases). Make GRO and XDP independent for a veth interface. ==================== Signed-off-by: David S. Miller <[email protected]>
2024-03-18selftests: net: veth: test the ability to independently manipulate GRO and XDPIgnat Korchagin2-3/+25
We should be able to independently flip either XDP or GRO states and toggling one should not affect the other. Adjust other tests as well that had implicit expectation that GRO would be automatically enabled. Signed-off-by: Ignat Korchagin <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-03-18net: veth: do not manipulate GRO when using XDPIgnat Korchagin1-18/+0
Commit d3256efd8e8b ("veth: allow enabling NAPI even without XDP") tried to fix the fact that GRO was not possible without XDP, because veth did not use NAPI without XDP. However, it also introduced the behaviour that GRO is always enabled, when XDP is enabled. While it might be desired for most cases, it is confusing for the user at best as the GRO flag suddenly changes, when an XDP program is attached. It also introduces some complexities in state management as was partially addressed in commit fe9f801355f0 ("net: veth: clear GRO when clearing XDP even when down"). But the biggest problem is that it is not possible to disable GRO at all, when an XDP program is attached, which might be needed for some use cases. Fix this by not touching the GRO flag on XDP enable/disable as the code already supports switching to NAPI if either GRO or XDP is requested. Link: https://lore.kernel.org/lkml/[email protected]/ Fixes: d3256efd8e8b ("veth: allow enabling NAPI even without XDP") Fixes: fe9f801355f0 ("net: veth: clear GRO when clearing XDP even when down") Signed-off-by: Ignat Korchagin <[email protected]> Reviewed-by: Toke Høiland-Jørgensen <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-03-18irqchip/renesas-rzg2l: Prevent spurious interrupts when setting trigger typeBiju Das1-4/+32
RZ/G2L interrupt chips require that the interrupt is masked before changing the NMI, IRQ, TINT interrupt settings. Aside of that, after setting an edge trigger type it is required to clear the interrupt status register in order to avoid spurious interrupts. The current implementation fails to do either of that and therefore is prone to generate spurious interrupts when setting the trigger type. Address this by: - Ensuring that the interrupt is masked at the chip level across the update for the TINT chip - Clearing the interrupt status register after updating the trigger mode for edge type interrupts [ tglx: Massaged changelog and reverted the spin_lock_irqsave() change as the set_type() callback is always called with interrupts disabled. ] Fixes: 3fed09559cd8 ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver") Signed-off-by: Biju Das <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]>
2024-03-18irqchip/renesas-rzg2l: Rename rzg2l_irq_eoi()Biju Das1-4/+3
Rename rzg2l_irq_eoi()->rzg2l_clear_irq_int() and simplify the code by removing redundant priv local variable. Suggested-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Biju Das <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]>
2024-03-18irqchip/renesas-rzg2l: Rename rzg2l_tint_eoi()Biju Das1-5/+3
Rename rzg2l_tint_eoi()->rzg2l_clear_tint_int() and simplify the code by removing redundant priv and hw_irq local variables. Signed-off-by: Biju Das <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]> Reviewed-by: Geert Uytterhoeven <[email protected]>
2024-03-18irqchip/renesas-rzg2l: Flush posted write in irq_eoi()Biju Das1-2/+14
The irq_eoi() callback of the RZ/G2L interrupt chip clears the relevant interrupt cause bit in the TSCR register by writing to it. This write is not sufficient because the write is posted and therefore not guaranteed to immediately clear the bit. Due to that delay the CPU can raise the just handled interrupt again. Prevent this by reading the register back which causes the posted write to be flushed to the hardware before the read completes. Fixes: 3fed09559cd8 ("irqchip: Add RZ/G2L IA55 Interrupt Controller driver") Signed-off-by: Biju Das <[email protected]> Signed-off-by: Thomas Gleixner <[email protected]>
2024-03-18xfrm: Allow UDP encapsulation only in offload modesLeon Romanovsky1-1/+2
The missing check of x->encap caused to the situation where GSO packets were created with UDP encapsulation. As a solution return the encap check for non-offloaded SA. Fixes: 983a73da1f99 ("xfrm: Pass UDP encapsulation in TX packet offload") Closes: https://lore.kernel.org/all/[email protected] Reported-by: Paolo Abeni <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2024-03-18net: esp: fix bad handling of pages from page_poolDragos Tatulea3-8/+18
When the skb is reorganized during esp_output (!esp->inline), the pages coming from the original skb fragments are supposed to be released back to the system through put_page. But if the skb fragment pages are originating from a page_pool, calling put_page on them will trigger a page_pool leak which will eventually result in a crash. This leak can be easily observed when using CONFIG_DEBUG_VM and doing ipsec + gre (non offloaded) forwarding: BUG: Bad page state in process ksoftirqd/16 pfn:1451b6 page:00000000de2b8d32 refcount:0 mapcount:0 mapping:0000000000000000 index:0x1451b6000 pfn:0x1451b6 flags: 0x200000000000000(node=0|zone=2) page_type: 0xffffffff() raw: 0200000000000000 dead000000000040 ffff88810d23c000 0000000000000000 raw: 00000001451b6000 0000000000000001 00000000ffffffff 0000000000000000 page dumped because: page_pool leak Modules linked in: ip_gre gre mlx5_ib mlx5_core xt_conntrack xt_MASQUERADE nf_conntrack_netlink nfnetlink iptable_nat nf_nat xt_addrtype br_netfilter rpcrdma rdma_ucm ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm ib_uverbs ib_core overlay zram zsmalloc fuse [last unloaded: mlx5_core] CPU: 16 PID: 96 Comm: ksoftirqd/16 Not tainted 6.8.0-rc4+ #22 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 Call Trace: <TASK> dump_stack_lvl+0x36/0x50 bad_page+0x70/0xf0 free_unref_page_prepare+0x27a/0x460 free_unref_page+0x38/0x120 esp_ssg_unref.isra.0+0x15f/0x200 esp_output_tail+0x66d/0x780 esp_xmit+0x2c5/0x360 validate_xmit_xfrm+0x313/0x370 ? validate_xmit_skb+0x1d/0x330 validate_xmit_skb_list+0x4c/0x70 sch_direct_xmit+0x23e/0x350 __dev_queue_xmit+0x337/0xba0 ? nf_hook_slow+0x3f/0xd0 ip_finish_output2+0x25e/0x580 iptunnel_xmit+0x19b/0x240 ip_tunnel_xmit+0x5fb/0xb60 ipgre_xmit+0x14d/0x280 [ip_gre] dev_hard_start_xmit+0xc3/0x1c0 __dev_queue_xmit+0x208/0xba0 ? nf_hook_slow+0x3f/0xd0 ip_finish_output2+0x1ca/0x580 ip_sublist_rcv_finish+0x32/0x40 ip_sublist_rcv+0x1b2/0x1f0 ? ip_rcv_finish_core.constprop.0+0x460/0x460 ip_list_rcv+0x103/0x130 __netif_receive_skb_list_core+0x181/0x1e0 netif_receive_skb_list_internal+0x1b3/0x2c0 napi_gro_receive+0xc8/0x200 gro_cell_poll+0x52/0x90 __napi_poll+0x25/0x1a0 net_rx_action+0x28e/0x300 __do_softirq+0xc3/0x276 ? sort_range+0x20/0x20 run_ksoftirqd+0x1e/0x30 smpboot_thread_fn+0xa6/0x130 kthread+0xcd/0x100 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork+0x31/0x50 ? kthread_complete_and_exit+0x20/0x20 ret_from_fork_asm+0x11/0x20 </TASK> The suggested fix is to introduce a new wrapper (skb_page_unref) that covers page refcounting for page_pool pages as well. Cc: [email protected] Fixes: 6a5bcd84e886 ("page_pool: Allow drivers to hint on SKB recycling") Reported-and-tested-by: Anatoli N.Chechelnickiy <[email protected]> Reported-by: Ian Kumlien <[email protected]> Link: https://lore.kernel.org/netdev/CAA85sZvvHtrpTQRqdaOx6gd55zPAVsqMYk_Lwh4Md5knTq7AyA@mail.gmail.com Signed-off-by: Dragos Tatulea <[email protected]> Reviewed-by: Mina Almasry <[email protected]> Reviewed-by: Jakub Kicinski <[email protected]> Acked-by: Ilias Apalodimas <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2024-03-18Merge tag 'timers-v6.9-rc1' of ↵Thomas Gleixner12-59/+191
https://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clocksource/event driver updates from Daniel Lezcano: - Fix -Wunused-but-set-variable warning for the iMX GPT timer (Daniel Lezcano) - Add Pixel6 compatible string for Exynos 4210 MCT timer (Peter Griffin) - Fix all kernel-doc warnings and misuse of comment format (Randy Dunlap) - Document in the DT bindings the interrupt used for input capture interrupt and udpate the example to match the reality (Geert Uytterhoeven) - Document RZ/Five SoC DT bindings (Lad Prabhakar) - Add DT bindings support for the i.MX95, reorganize the driver to move globale variables to a timer private structure and introduce the i.MX95 timer support (Peng Fan) - Fix prescalar value to conform to the ARM global timer documentation. Fix data types and comparison, guard the divide by zero code section and use the available macros for bit manipulation (Martin Blumenstingl) - Add Ralink SoCs system tick counter (Sergio Paracuellos) - Add support for cadence TTC PWM (Mubin Sayyed) - Clear timer interrupt on timer initialization to prevent the interrupt to fire during setup (Ley Foon Tan) Link: https://lore.kernel.org/r/[email protected]
2024-03-18docs: verify/bisect: remove a level of indentingThorsten Leemhuis1-57/+57
Remove a unnecessary level of indenting in some areas of the reference section. No text changes. Signed-off-by: Thorsten Leemhuis <[email protected]> Signed-off-by: Jonathan Corbet <[email protected]> Message-ID: <01f1a407e92b92d9f8614bd34882956694bab123.1710750972.git.linux@leemhuis.info>
2024-03-18docs: verify/bisect: drop 'v' prefix, EOL aspect, and assorted fixesThorsten Leemhuis1-55/+62
A bunch of minor fixes and improvements and two other things: - Explain the 'v' version prefix when it's first used, but drop it everywhere in the text for consistency. Also drop single quotes around a few version numbers. - Point out that testing a stable/longterm kernel only makes sense if the series is still supported. Signed-off-by: Thorsten Leemhuis <[email protected]> Signed-off-by: Jonathan Corbet <[email protected]> Message-ID: <f13d203d5975419608996300992eaa2e4fcc2dc1.1710750972.git.linux@leemhuis.info>
2024-03-18docs: verify/bisect: check taint flagThorsten Leemhuis1-15/+49
Instruct readers to check the taint flag, as the reason why it's set might directly or indirectly cause the bug or interfere with testing. Signed-off-by: Thorsten Leemhuis <[email protected]> Signed-off-by: Jonathan Corbet <[email protected]> Message-ID: <8fcaffa8e85f36d51178d61061355c3c8bc85a0f.1710750972.git.linux@leemhuis.info>
2024-03-18docs: verify/bisect: improve install instructionsThorsten Leemhuis1-65/+57
These changes among others ensure modules will be installed when /sbin/installkernel is missing. Furthermore describe better what tasks the script ideally performs so that users can more easily check if those have been taken care of. In addition to that point to the distro's documentation for further details on installing kernels manually. Signed-off-by: Thorsten Leemhuis <[email protected]> Signed-off-by: Jonathan Corbet <[email protected]> Message-ID: <e392bd5eb12654bed635f32b24304a712b0c67d1.1710750972.git.linux@leemhuis.info>
2024-03-18docs: handling-regressions.rst: Update regzbot command fixed-by to fixNícolas F. R. A. Prado1-1/+1
On the reference documentation for regzbot, the fixed-by command has been renamed to fix. Update the kernel documentation accordingly. Link: https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md Link: https://gitlab.com/knurd42/regzbot/-/commit/6d8d30f6bda84e1b711121bb98a07a464d3f089a Reviewed-by: Thorsten Leemhuis <[email protected]> Signed-off-by: "Nícolas F. R. A. Prado" <[email protected]> Signed-off-by: Jonathan Corbet <[email protected]> Message-ID: <[email protected]>
2024-03-18docs: *-regressions.rst: Add colon to regzbot commandsNícolas F. R. A. Prado2-6/+6
Use colon as command terminator everywhere for consistency, even though it's not strictly necessary. That way it will also match regzbot's reference documentation. Link: https://gitlab.com/knurd42/regzbot/-/blob/main/docs/reference.md Reviewed-by: Thorsten Leemhuis <[email protected]> Signed-off-by: "Nícolas F. R. A. Prado" <[email protected]> Signed-off-by: Jonathan Corbet <[email protected]> Message-ID: <[email protected]>
2024-03-18doc: Fix typo in admin-guide/cifs/introduction.rstKendra Moore1-1/+1
This patch corrects a spelling error specifically the word "supports" was misspelled "suppors". No functional changes are made by this patch; it only improves the accuracy and readability of the documentation. Signed-off-by: Kendra Moore <[email protected]> Reviewed-by: "Matthew Wilcox (Oracle)" <[email protected]> Signed-off-by: Jonathan Corbet <[email protected]> Message-ID: <[email protected]>
2024-03-18README: Fix spellingMaki Hatano1-1/+1
- ReStructured Text should be exactly reStructuredText - "reStructuredText" is ONE word, not two! according to https://docutils.sourceforge.io/rst.html Signed-off-by: Maki Hatano <[email protected]> Signed-off-by: Jonathan Corbet <[email protected]> Message-ID: <[email protected]>
2024-03-18packet: annotate data-races around ignore_outgoingEric Dumazet2-3/+3
ignore_outgoing is read locklessly from dev_queue_xmit_nit() and packet_getsockopt() Add appropriate READ_ONCE()/WRITE_ONCE() annotations. syzbot reported: BUG: KCSAN: data-race in dev_queue_xmit_nit / packet_setsockopt write to 0xffff888107804542 of 1 bytes by task 22618 on cpu 0: packet_setsockopt+0xd83/0xfd0 net/packet/af_packet.c:4003 do_sock_setsockopt net/socket.c:2311 [inline] __sys_setsockopt+0x1d8/0x250 net/socket.c:2334 __do_sys_setsockopt net/socket.c:2343 [inline] __se_sys_setsockopt net/socket.c:2340 [inline] __x64_sys_setsockopt+0x66/0x80 net/socket.c:2340 do_syscall_64+0xd3/0x1d0 entry_SYSCALL_64_after_hwframe+0x6d/0x75 read to 0xffff888107804542 of 1 bytes by task 27 on cpu 1: dev_queue_xmit_nit+0x82/0x620 net/core/dev.c:2248 xmit_one net/core/dev.c:3527 [inline] dev_hard_start_xmit+0xcc/0x3f0 net/core/dev.c:3547 __dev_queue_xmit+0xf24/0x1dd0 net/core/dev.c:4335 dev_queue_xmit include/linux/netdevice.h:3091 [inline] batadv_send_skb_packet+0x264/0x300 net/batman-adv/send.c:108 batadv_send_broadcast_skb+0x24/0x30 net/batman-adv/send.c:127 batadv_iv_ogm_send_to_if net/batman-adv/bat_iv_ogm.c:392 [inline] batadv_iv_ogm_emit net/batman-adv/bat_iv_ogm.c:420 [inline] batadv_iv_send_outstanding_bat_ogm_packet+0x3f0/0x4b0 net/batman-adv/bat_iv_ogm.c:1700 process_one_work kernel/workqueue.c:3254 [inline] process_scheduled_works+0x465/0x990 kernel/workqueue.c:3335 worker_thread+0x526/0x730 kernel/workqueue.c:3416 kthread+0x1d1/0x210 kernel/kthread.c:388 ret_from_fork+0x4b/0x60 arch/x86/kernel/process.c:147 ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:243 value changed: 0x00 -> 0x01 Reported by Kernel Concurrency Sanitizer on: CPU: 1 PID: 27 Comm: kworker/u8:1 Tainted: G W 6.8.0-syzkaller-08073-g480e035fc4c7 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 02/29/2024 Workqueue: bat_events batadv_iv_send_outstanding_bat_ogm_packet Fixes: fa788d986a3a ("packet: add sockopt to ignore outgoing packets") Reported-by: [email protected] Closes: https://lore.kernel.org/netdev/CANn89i+Z7MfbkBLOv=p7KZ7=K1rKHO4P1OL5LYDCtBiyqsa9oQ@mail.gmail.com/T/#t Signed-off-by: Eric Dumazet <[email protected]> Cc: Willem de Bruijn <[email protected]> Reviewed-by: Willem de Bruijn <[email protected]> Reviewed-by: Jason Xing <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-03-18fscache: Fix error handling in fscache_begin_operation()David Howells1-1/+3
Fix fscache_begin_operation() to clear cres->cache_priv on error, otherwise fscache_resources_valid() will report it as being valid. Signed-off-by: David Howells <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Jeff Layton <[email protected]> Reported-by: Marc Dionne <[email protected]> cc: Jeff Layton <[email protected]> cc: [email protected] cc: [email protected] Signed-off-by: Christian Brauner <[email protected]>
2024-03-18fs,block: get holder during claimChristian Brauner3-0/+35
Now that we open block devices as files we need to deal with the realities that closing is a deferred operation. An operation on the block device such as e.g., freeze, thaw, or removal that runs concurrently with umount, tries to acquire a stable reference on the holder. The holder might already be gone though. Make that reliable by grabbing a passive reference to the holder during bdev_open() and releasing it during bdev_release(). Fixes: f3a608827d1f ("bdev: open block device as files") # mainline only Reported-by: Christoph Hellwig <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Jan Kara <[email protected]> Reviewed-by: Christoph Hellwig <[email protected]> Tested-by: Yi Zhang <[email protected]> Reported-by: https://lore.kernel.org/r/CAHj4cs8tbDwKRwfS1=DmooP73ysM__xAb2PQc6XsAmWR+VuYmg@mail.gmail.com Link: https://lore.kernel.org/r/20240315-freibad-annehmbar-ca68c375af91@brauner Signed-off-by: Christian Brauner <[email protected]>
2024-03-18net: wan: fsl_qmc_hdlc: Fix module compilationHerve Codina1-1/+1
The fsl_qmc_driver does not compile as module: error: ‘qmc_hdlc_driver’ undeclared here (not in a function); 405 | MODULE_DEVICE_TABLE(of, qmc_hdlc_driver); | ^~~~~~~~~~~~~~~ Fix the typo. Fixes: b40f00ecd463 ("net: wan: Add support for QMC HDLC") Reported-by: Michael Ellerman <[email protected]> Closes: https://lore.kernel.org/linux-kernel/[email protected]/ Signed-off-by: Herve Codina <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2024-03-18Revert "firewire: Kill unnecessary buf check in device_attribute.show"Li Zhijian1-4/+12
This reverts commit 4a2b06ca33763b363038d333274e212db6ff0de1. The previous fix didn't consider callers from other than sysfs. Revert it to fix the NULL dereference kernel: ? sysfs_emit+0xb5/0xc0 kernel: show_immediate+0x13f/0x1d0 [firewire_core] kernel: init_fw_attribute_group+0x81/0x150 [firewire_core] kernel: create_units+0x119/0x160 [firewire_core] kernel: fw_device_init+0x1a9/0x330 [firewire_core] kernel: fw_device_workfn+0x12/0x20 [firewire_core] kernel: process_one_work+0x16f/0x350 kernel: worker_thread+0x306/0x440 kernel: ? __pfx_worker_thread+0x10/0x10 kernel: kthread+0xf2/0x120 kernel: ? __pfx_kthread+0x10/0x10 kernel: ret_from_fork+0x47/0x70 kernel: ? __pfx_kthread+0x10/0x10 kernel: ret_from_fork_asm+0x1b/0x30 kernel: </TASK> kernel: ---[ end trace 0000000000000000 ]--- kernel: ------------[ cut here ]------------ Fixes: 4a2b06ca3376 ("firewire: Kill unnecessary buf check in device_attribute.show") Reported-by: Takashi Sakamoto <[email protected]> Signed-off-by: Li Zhijian <[email protected]> Link: https://lore.kernel.org/lkml/[email protected]/ Signed-off-by: Takashi Sakamoto <[email protected]>
2024-03-18hyperv-tlfs: Rename some HV_REGISTER_* defines for consistencyNuno Das Neves5-23/+23
Rename HV_REGISTER_GUEST_OSID to HV_REGISTER_GUEST_OS_ID. This matches the existing HV_X64_MSR_GUEST_OS_ID. Rename HV_REGISTER_CRASH_* to HV_REGISTER_GUEST_CRASH_*. Including GUEST_ is consistent with other #defines such as HV_FEATURE_GUEST_CRASH_MSR_AVAILABLE. The new names also match the TLFS document more accurately, i.e. HvRegisterGuestCrash*. Signed-off-by: Nuno Das Neves <[email protected]> Link: https://lore.kernel.org/r/1710285687-9160-1-git-send-email-nunodasneves@linux.microsoft.com Signed-off-by: Wei Liu <[email protected]> Message-ID: <1710285687-9160-1-git-send-email-nunodasneves@linux.microsoft.com>
2024-03-18bcachefs: ratelimit errors from async_btree_node_rewriteKent Overstreet1-1/+1
Signed-off-by: Kent Overstreet <[email protected]>
2024-03-18bcachefs: Run check_topology() firstKent Overstreet1-1/+1
check_topology() doesn't actually require alloc info - and running it first means other passes don't have to catch btree read errors. Signed-off-by: Kent Overstreet <[email protected]>
2024-03-18bcachefs: Improve bch2_fatal_error()Kent Overstreet15-35/+35
error messages should always include __func__ Signed-off-by: Kent Overstreet <[email protected]>
2024-03-18bcachefs: Fix lost transaction restart errorKent Overstreet1-4/+6
Signed-off-by: Kent Overstreet <[email protected]>
2024-03-17bcachefs: Don't corrupt journal keys gap buffer when dropping alloc infoKent Overstreet3-2/+9
Signed-off-by: Kent Overstreet <[email protected]>
2024-03-17bcachefs: fix for building in userspaceKent Overstreet1-16/+16
Signed-off-by: Kent Overstreet <[email protected]>
2024-03-17bcachefs: bch2_snapshot_is_ancestor() now safe to call in early recoveryKent Overstreet1-14/+18
this fixes an assertion pop in bch2_check_snapshot_trees() -> check_snapshot_tree() -> bch2_snapshot_tree_master_subvol() -> bch2_snapshot_is_ancestor() Signed-off-by: Kent Overstreet <[email protected]>
2024-03-17bcachefs: Fix nested transaction restart handling in bch2_bucket_gens_init()Kent Overstreet1-6/+7
Nested transaction restart handling is typically best avoided; when the inner context handles a transaction restart it invalidates the outer transaction context, so we need to make sure to return a transaction_restart_nested error. This code wasn't doing that, and hit the assertion in for_each_btree_key() that checks for that via trans->restart_count. Signed-off-by: Kent Overstreet <[email protected]>
2024-03-17bcachefs: Improve sysfs internal/btree_updatesKent Overstreet2-6/+8
Print out the function that launched the btree update. Signed-off-by: Kent Overstreet <[email protected]>
2024-03-17bcachefs: Split out btree_node_rewrite_workerKent Overstreet2-2/+11
This fixes a deadlock due to using btree_interior_update_worker for non interior updates - async btree node rewrites were blocking, and then blocking other interior updates. Signed-off-by: Kent Overstreet <[email protected]>
2024-03-17bcachefs: Fix locking in bch2_alloc_write_key()Kent Overstreet1-1/+1
Signed-off-by: Kent Overstreet <[email protected]>
2024-03-17bcachefs: Avoid extent entry type assertions in .invalid()Kent Overstreet1-3/+3
After keys have passed bkey_ops.key_invalid we should never see invalid extent entry types - but .key_invalid itself needs to cope with them. Signed-off-by: Kent Overstreet <[email protected]>
2024-03-17bcachefs: Fix spurious -BCH_ERR_transaction_restart_nestedKent Overstreet1-8/+21
We only need to return transaction_restart_nested when we're inside a context that's handling transaction restarts. Also, add a missing check_subdir_count() call. Signed-off-by: Kent Overstreet <[email protected]>
2024-03-17bcachefs: Fix check_key_has_snapshot() callKent Overstreet1-1/+3
Signed-off-by: Kent Overstreet <[email protected]>
2024-03-17bcachefs: Change "accounting overran journal reservation" to a warningKent Overstreet1-1/+2
This doesn't need to be a BUG_ON(); the actual serious "things break" condition is if the whole journal write overruns the available space, and that has a fatal error, not a BUG_ON(). This check indicates we screwed something up, but it should be a warning. Signed-off-by: Kent Overstreet <[email protected]>
2024-03-17Merge tag 'i3c/for-6.9' of ↵Linus Torvalds9-10/+12
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux Pull i3c updates from Alexandre Belloni: "Not much this cycle with only three patches. Core: - i3c_bus_type is now const Drivers: - dw: disabling IBI is only allowed when hot join and SIR are disabled" * tag 'i3c/for-6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: i3c: Make i3c_bus_type const i3c: dw: Disable IBI IRQ depends on hot-join and SIR enabling dt-bindings: i3c: drop "master" node name suffix
2024-03-17Merge tag 'efi-fixes-for-v6.9-1' of ↵Linus Torvalds1-2/+4
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi Pull EFI fix from Ard Biesheuvel: "This fixes an oversight on my part in the recent EFI stub rework for x86, which is needed to get Linux/x86 distro builds signed again for secure boot by Microsoft. For this reason, most of this work is being backported to v6.1, which is therefore also affected by this regression. - Explicitly wipe BSS in the native EFI entrypoint, so that globals shared with the legacy decompressor are zero-initialized correctly" * tag 'efi-fixes-for-v6.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: x86/efistub: Clear decompressor BSS in native EFI entrypoint
2024-03-17Merge tag 'timers-urgent-2024-03-17' of ↵Linus Torvalds1-20/+0
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer fix from Ingo Molnar: "Fix timer migration bug that can result in long bootup delays and other oddities" * tag 'timers-urgent-2024-03-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: timer/migration: Remove buggy early return on deactivation
2024-03-17Merge tag 'perf-urgent-2024-03-17' of ↵Linus Torvalds2-3/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 perf event fixes from Ingo Molnar: - Work around AMD erratum to filter out bogus LBR stack entries - Fix incorrect PMU reset that can result in warnings (or worse) during suspend/hibernation * tag 'perf-urgent-2024-03-17' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/x86/amd/core: Avoid register reset when CPU is dead perf/x86/amd/lbr: Discard erroneous branch entries
2024-03-17Merge tag 'linux-watchdog-6.9-rc1' of ↵Linus Torvalds14-48/+182
git://www.linux-watchdog.org/linux-watchdog Pull watchdog updates from Wim Van Sebroeck: - Remove usage of the deprecated ida_simple_xx() API - Add kernel-doc for wdt_set_timeout() - Add support for R-Car V4M, StarFive's JH8100 and sam9x7-wdt - Fixes and small improvements * tag 'linux-watchdog-6.9-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog: intel-mid_wdt: Get platform data via dev_get_platdata() watchdog: intel-mid_wdt: Don't use "proxy" headers watchdog: intel-mid_wdt: Remove unused intel-mid.h dt-bindings: watchdog: sama5d4-wdt: add compatible for sam9x7-wdt dt-bindings: watchdog: sprd,sp9860-wdt: convert to YAML dt-bindings: watchdog: starfive,jh7100-wdt: Add compatible for JH8100 watchdog: stm32_iwdg: initialize default timeout dt-bindings: watchdog: arm,sp805: document the reset signal watchdog: sp805_wdt: deassert the reset if available watchdog/hpwdt: Support Suspend and Resume dt-bindings: watchdog: renesas-wdt: Add support for R-Car V4M watchdog: starfive: check watchdog status before enabling in system resume watchdog: starfive: Check pm_runtime_enabled() before decrementing usage counter watchdog: qcom: fine tune the max timeout value calculation watchdog: Add kernel-doc for wdt_set_timeout() watchdog: core: Remove usage of the deprecated ida_simple_xx() API
2024-03-17Merge tag 'pcmcia-6.9-rc1' of ↵Linus Torvalds3-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux Pull PCMCIA updates from Dominik Brodowski: "Mark some structs 'const' now that the driver core supports it (Ricardo B Marliere)" * tag 'pcmcia-6.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/linux: pcmcia: cs: make pcmcia_socket_class constant pcmcia: ds: make pcmcia_bus_type const
2024-03-17Merge tag 'input-for-v6.9-rc0' of ↵Linus Torvalds38-671/+1669
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - a new driver for Goodix Berlin I2C and SPI touch controllers - support for IQS7222D v1.1 and v1.2 in iqs7222 driver - support for IST3032C and IST3038B parts in Imagis touchscreen driver - support for touch keys for Imagis touchscreen controllers - support for Snakebyte GAMEPADs in xpad driver - various cleanups and conversions to yaml for device tree bindings - assorted fixes and cleanups - old Synaptics navpoint driver has been removed since the only board that used it (HP iPAQ hx4700) was removed a while ago. * tag 'input-for-v6.9-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (37 commits) Input: xpad - add support for Snakebyte GAMEPADs dt-bindings: input: samsung,s3c6410-keypad: convert to DT Schema Input: imagis - add touch key support dt-bindings: input: imagis: Document touch keys Input: imagis - use FIELD_GET where applicable Input: make input_class constant dt-bindings: input: atmel,captouch: convert bindings to YAML Input: iqs7222 - add support for IQS7222D v1.1 and v1.2 dt-bindings: input: allwinner,sun4i-a10-lrad: drop redundant type from label Input: serio - make serio_bus const Input: synaptics-rmi4 - make rmi_bus_type const Input: xilinx_ps2 - fix kernel-doc for xps2_of_probe function input/touchscreen: imagis: add support for IST3032C dt-bindings: input/touchscreen: imagis: add compatible for IST3032C input/touchscreen: imagis: Add support for Imagis IST3038B dt-bindings: input/touchscreen: Add compatible for IST3038B input/touchscreen: imagis: Correct the maximum touch area value Input: leds - change config symbol dependency for audio mute trigger Input: ti_am335x_tsc - remove redundant assignment to variable config Input: xpad - sort xpad_device by vendor and product ID ...
2024-03-17s390/entry: compare gmap asce to determine guest/host faultSven Schnelle3-19/+18
With the current implementation, there are some cornercases where a host fault would be treated as a guest fault, for example when the sie instruction causes a program check. Therefore store the gmap asce in ptregs, and use that to compare the primary asce from the fault instead of matching instruction addresses. Suggested-by: Heiko Carstens <[email protected]> Signed-off-by: Sven Schnelle <[email protected]> Signed-off-by: Heiko Carstens <[email protected]>
2024-03-17s390/entry: remove OUTSIDE macroSven Schnelle1-25/+4
With only one OUTSIDE user left, remove the macro and move the code directly to the machine check handler. This has the advantage that it is much easier to determine which registers are used. Signed-off-by: Sven Schnelle <[email protected]> Reviewed-by: Heiko Carstens <[email protected]> Signed-off-by: Heiko Carstens <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.