aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2022-05-17net/mlx5: DR, Ignore modify TTL on RX if device doesn't support itYevgeny Kliteynik2-21/+48
When modifying TTL, packet's csum has to be recalculated. Due to HW issue in ConnectX-5, csum recalculation for modify TTL on RX is supported through a work-around that is specifically enabled by configuration. If the work-around isn't enabled, rather than adding an unsupported action the modify TTL action on RX should be ignored. Ignoring modify TTL action might result in zero actions, so in such cases we will not convert the match STE to modify STE, as it is done by FW in DMFS. This patch fixes an issue where modify TTL action was ignored both on RX and TX instead of only on RX. Fixes: 4ff725e1d4ad ("net/mlx5: DR, Ignore modify TTL if device doesn't support it") Signed-off-by: Yevgeny Kliteynik <[email protected]> Reviewed-by: Alex Vesker <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-05-17net/mlx5: Initialize flow steering during driver probeShay Drory3-61/+91
Currently, software objects of flow steering are created and destroyed during reload flow. In case a device is unloaded, the following error is printed during grace period: mlx5_core 0000:00:0b.0: mlx5_fw_fatal_reporter_err_work:690:(pid 95): Driver is in error state. Unloading As a solution to fix use-after-free bugs, where we try to access these objects, when reading the value of flow_steering_mode devlink param[1], let's split flow steering creation and destruction into two routines: * init and cleanup: memory, cache, and pools allocation/free. * create and destroy: namespaces initialization and cleanup. While at it, re-order the cleanup function to mirror the init function. [1] Kasan trace: [ 385.119849 ] BUG: KASAN: use-after-free in mlx5_devlink_fs_mode_get+0x3b/0xa0 [ 385.119849 ] Read of size 4 at addr ffff888104b79308 by task bash/291 [ 385.119849 ] [ 385.119849 ] CPU: 1 PID: 291 Comm: bash Not tainted 5.17.0-rc1+ #2 [ 385.119849 ] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-2.fc32 04/01/2014 [ 385.119849 ] Call Trace: [ 385.119849 ] <TASK> [ 385.119849 ] dump_stack_lvl+0x6e/0x91 [ 385.119849 ] print_address_description.constprop.0+0x1f/0x160 [ 385.119849 ] ? mlx5_devlink_fs_mode_get+0x3b/0xa0 [ 385.119849 ] ? mlx5_devlink_fs_mode_get+0x3b/0xa0 [ 385.119849 ] kasan_report.cold+0x83/0xdf [ 385.119849 ] ? devlink_param_notify+0x20/0x190 [ 385.119849 ] ? mlx5_devlink_fs_mode_get+0x3b/0xa0 [ 385.119849 ] mlx5_devlink_fs_mode_get+0x3b/0xa0 [ 385.119849 ] devlink_nl_param_fill+0x18a/0xa50 [ 385.119849 ] ? _raw_spin_lock_irqsave+0x8d/0xe0 [ 385.119849 ] ? devlink_flash_update_timeout_notify+0xf0/0xf0 [ 385.119849 ] ? __wake_up_common+0x4b/0x1e0 [ 385.119849 ] ? preempt_count_sub+0x14/0xc0 [ 385.119849 ] ? _raw_spin_unlock_irqrestore+0x28/0x40 [ 385.119849 ] ? __wake_up_common_lock+0xe3/0x140 [ 385.119849 ] ? __wake_up_common+0x1e0/0x1e0 [ 385.119849 ] ? __sanitizer_cov_trace_const_cmp8+0x27/0x80 [ 385.119849 ] ? __rcu_read_unlock+0x48/0x70 [ 385.119849 ] ? kasan_unpoison+0x23/0x50 [ 385.119849 ] ? __kasan_slab_alloc+0x2c/0x80 [ 385.119849 ] ? memset+0x20/0x40 [ 385.119849 ] ? __sanitizer_cov_trace_const_cmp4+0x25/0x80 [ 385.119849 ] devlink_param_notify+0xce/0x190 [ 385.119849 ] devlink_unregister+0x92/0x2b0 [ 385.119849 ] remove_one+0x41/0x140 [ 385.119849 ] pci_device_remove+0x68/0x140 [ 385.119849 ] ? pcibios_free_irq+0x10/0x10 [ 385.119849 ] __device_release_driver+0x294/0x3f0 [ 385.119849 ] device_driver_detach+0x82/0x130 [ 385.119849 ] unbind_store+0x193/0x1b0 [ 385.119849 ] ? subsys_interface_unregister+0x270/0x270 [ 385.119849 ] drv_attr_store+0x4e/0x70 [ 385.119849 ] ? drv_attr_show+0x60/0x60 [ 385.119849 ] sysfs_kf_write+0xa7/0xc0 [ 385.119849 ] kernfs_fop_write_iter+0x23a/0x2f0 [ 385.119849 ] ? sysfs_kf_bin_read+0x160/0x160 [ 385.119849 ] new_sync_write+0x311/0x430 [ 385.119849 ] ? new_sync_read+0x480/0x480 [ 385.119849 ] ? _raw_spin_lock+0x87/0xe0 [ 385.119849 ] ? __sanitizer_cov_trace_cmp4+0x25/0x80 [ 385.119849 ] ? security_file_permission+0x94/0xa0 [ 385.119849 ] vfs_write+0x4c7/0x590 [ 385.119849 ] ksys_write+0xf6/0x1e0 [ 385.119849 ] ? __x64_sys_read+0x50/0x50 [ 385.119849 ] ? fpregs_assert_state_consistent+0x99/0xa0 [ 385.119849 ] do_syscall_64+0x3d/0x90 [ 385.119849 ] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 385.119849 ] RIP: 0033:0x7fc36ef38504 [ 385.119849 ] Code: 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b3 0f 1f 80 00 00 00 00 48 8d 05 f9 61 0d 00 8b 00 85 c0 75 13 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 54 c3 0f 1f 00 41 54 49 89 d4 55 48 89 f5 53 [ 385.119849 ] RSP: 002b:00007ffde0ff3d08 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 385.119849 ] RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007fc36ef38504 [ 385.119849 ] RDX: 000000000000000c RSI: 00007fc370521040 RDI: 0000000000000001 [ 385.119849 ] RBP: 00007fc370521040 R08: 00007fc36f00b8c0 R09: 00007fc36ee4b740 [ 385.119849 ] R10: 0000000000000000 R11: 0000000000000246 R12: 00007fc36f00a760 [ 385.119849 ] R13: 000000000000000c R14: 00007fc36f005760 R15: 000000000000000c [ 385.119849 ] </TASK> [ 385.119849 ] [ 385.119849 ] Allocated by task 65: [ 385.119849 ] kasan_save_stack+0x1e/0x40 [ 385.119849 ] __kasan_kmalloc+0x81/0xa0 [ 385.119849 ] mlx5_init_fs+0x11b/0x1160 [ 385.119849 ] mlx5_load+0x13c/0x220 [ 385.119849 ] mlx5_load_one+0xda/0x160 [ 385.119849 ] mlx5_recover_device+0xb8/0x100 [ 385.119849 ] mlx5_health_try_recover+0x2f9/0x3a1 [ 385.119849 ] devlink_health_reporter_recover+0x75/0x100 [ 385.119849 ] devlink_health_report+0x26c/0x4b0 [ 385.275909 ] mlx5_fw_fatal_reporter_err_work+0x11e/0x1b0 [ 385.275909 ] process_one_work+0x520/0x970 [ 385.275909 ] worker_thread+0x378/0x950 [ 385.275909 ] kthread+0x1bb/0x200 [ 385.275909 ] ret_from_fork+0x1f/0x30 [ 385.275909 ] [ 385.275909 ] Freed by task 65: [ 385.275909 ] kasan_save_stack+0x1e/0x40 [ 385.275909 ] kasan_set_track+0x21/0x30 [ 385.275909 ] kasan_set_free_info+0x20/0x30 [ 385.275909 ] __kasan_slab_free+0xfc/0x140 [ 385.275909 ] kfree+0xa5/0x3b0 [ 385.275909 ] mlx5_unload+0x2e/0xb0 [ 385.275909 ] mlx5_unload_one+0x86/0xb0 [ 385.275909 ] mlx5_fw_fatal_reporter_err_work.cold+0xca/0xcf [ 385.275909 ] process_one_work+0x520/0x970 [ 385.275909 ] worker_thread+0x378/0x950 [ 385.275909 ] kthread+0x1bb/0x200 [ 385.275909 ] ret_from_fork+0x1f/0x30 [ 385.275909 ] [ 385.275909 ] The buggy address belongs to the object at ffff888104b79300 [ 385.275909 ] which belongs to the cache kmalloc-128 of size 128 [ 385.275909 ] The buggy address is located 8 bytes inside of [ 385.275909 ] 128-byte region [ffff888104b79300, ffff888104b79380) [ 385.275909 ] The buggy address belongs to the page: [ 385.275909 ] page:00000000de44dd39 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x104b78 [ 385.275909 ] head:00000000de44dd39 order:1 compound_mapcount:0 [ 385.275909 ] flags: 0x8000000000010200(slab|head|zone=2) [ 385.275909 ] raw: 8000000000010200 0000000000000000 dead000000000122 ffff8881000428c0 [ 385.275909 ] raw: 0000000000000000 0000000080200020 00000001ffffffff 0000000000000000 [ 385.275909 ] page dumped because: kasan: bad access detected [ 385.275909 ] [ 385.275909 ] Memory state around the buggy address: [ 385.275909 ] ffff888104b79200: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 fc fc [ 385.275909 ] ffff888104b79280: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 385.275909 ] >ffff888104b79300: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 385.275909 ] ^ [ 385.275909 ] ffff888104b79380: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc [ 385.275909 ] ffff888104b79400: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb [ 385.275909 ]] Fixes: e890acd5ff18 ("net/mlx5: Add devlink flow_steering_mode parameter") Signed-off-by: Shay Drory <[email protected]> Reviewed-by: Mark Bloch <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-05-17net/mlx5: DR, Fix missing flow_source when creating multi-destination FW tableMaor Dickman5-6/+14
In order to support multiple destination FTEs with SW steering FW table is created with single FTE with multiple actions and SW steering rule forward to it. When creating this table, flow source isn't set according to the original FTE. Fix this by passing the original FTE flow source to the created FW table. Fixes: 34583beea4b7 ("net/mlx5: DR, Create multi-destination table for SW-steering use") Signed-off-by: Maor Dickman <[email protected]> Reviewed-by: Yevgeny Kliteynik <[email protected]> Signed-off-by: Saeed Mahameed <[email protected]>
2022-05-17scsi: target: Fix incorrect use of cpumask_tMingzhe Zou2-20/+36
In commit d72d827f2f26, I used 'cpumask_t' incorrectly: void iscsit_thread_get_cpumask(struct iscsi_conn *conn) { int ord, cpu; cpumask_t conn_allowed_cpumask; ...... } static ssize_t lio_target_wwn_cpus_allowed_list_store( struct config_item *item, const char *page, size_t count) { int ret; char *orig; cpumask_t new_allowed_cpumask; ...... } The correct pattern should be as follows: cpumask_var_t mask; if (!zalloc_cpumask_var(&mask, GFP_KERNEL)) return -ENOMEM; ... use 'mask' here ... free_cpumask_var(mask); Link: https://lore.kernel.org/r/[email protected] Fixes: d72d827f2f26 ("scsi: target: Add iscsi/cpus_allowed_list in configfs") Reported-by: Test Bot <[email protected]> Reviewed-by: Mike Christie <[email protected]> Signed-off-by: Mingzhe Zou <[email protected]> Signed-off-by: Martin K. Petersen <[email protected]>
2022-05-17NFC: nci: fix sleep in atomic context bugs caused by nci_skb_allocDuoming Zhou2-3/+3
There are sleep in atomic context bugs when the request to secure element of st-nci is timeout. The root cause is that nci_skb_alloc with GFP_KERNEL parameter is called in st_nci_se_wt_timeout which is a timer handler. The call paths that could trigger bugs are shown below: (interrupt context 1) st_nci_se_wt_timeout nci_hci_send_event nci_hci_send_data nci_skb_alloc(..., GFP_KERNEL) //may sleep (interrupt context 2) st_nci_se_wt_timeout nci_hci_send_event nci_hci_send_data nci_send_data nci_queue_tx_data_frags nci_skb_alloc(..., GFP_KERNEL) //may sleep This patch changes allocation mode of nci_skb_alloc from GFP_KERNEL to GFP_ATOMIC in order to prevent atomic context sleeping. The GFP_ATOMIC flag makes memory allocation operation could be used in atomic context. Fixes: ed06aeefdac3 ("nfc: st-nci: Rename st21nfcb to st-nci") Signed-off-by: Duoming Zhou <[email protected]> Reviewed-by: Krzysztof Kozlowski <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-17net/qla3xxx: Fix a test in ql_reset_work()Christophe JAILLET1-1/+2
test_bit() tests if one bit is set or not. Here the logic seems to check of bit QL_RESET_PER_SCSI (i.e. 4) OR bit QL_RESET_START (i.e. 3) is set. In fact, it checks if bit 7 (4 | 3 = 7) is set, that is to say QL_ADAPTER_UP. This looks harmless, because this bit is likely be set, and when the ql_reset_work() delayed work is scheduled in ql3xxx_isr() (the only place that schedule this work), QL_RESET_START or QL_RESET_PER_SCSI is set. This has been spotted by smatch. Fixes: 5a4faa873782 ("[PATCH] qla3xxx NIC driver") Signed-off-by: Christophe JAILLET <[email protected]> Link: https://lore.kernel.org/r/80e73e33f390001d9c0140ffa9baddf6466a41a2.1652637337.git.christophe.jaillet@wanadoo.fr Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-17Merge tag 'pci-v5.18-fixes-1' of ↵Linus Torvalds3-27/+38
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI fixes from Bjorn Helgaas: - Avoid putting Elo i2 PCIe Ports in D3cold because downstream devices are inaccessible after going back to D0 (Rafael J. Wysocki) - Qualcomm SM8250 has a ddrss_sf_tbu clock but SC8180X does not; make a SC8180X-specific config without the clock so it probes correctly (Bjorn Andersson) - Revert aardvark chained IRQ handler rewrite because it broke interrupt affinity (Pali Rohár) * tag 'pci-v5.18-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: Revert "PCI: aardvark: Rewrite IRQ code to chained IRQ handler" PCI: qcom: Remove ddrss_sf_tbu clock from SC8180X PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold
2022-05-17Merge tag 'thermal-5.18-rc8' of ↵Linus Torvalds1-16/+32
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull thermal control fix from Rafael Wysocki: "Fix up a recent change in the int340x thermal driver that inadvertently broke thermal zone handling on some systems (Srinivas Pandruvada)" * tag 'thermal-5.18-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: thermal: int340x: Mode setting with new OS handshake
2022-05-17selinux: fix bad cleanup on error in hashtab_duplicate()Ondrej Mosnacek1-1/+2
The code attempts to free the 'new' pointer using kmem_cache_free(), which is wrong because this function isn't responsible of freeing it. Instead, the function should free new->htable and clear the contents of *new (to prevent double-free). Cc: [email protected] Fixes: c7c556f1e81b ("selinux: refactor changing booleans") Reported-by: Wander Lairson Costa <[email protected]> Signed-off-by: Ondrej Mosnacek <[email protected]> Signed-off-by: Paul Moore <[email protected]>
2022-05-17drm/dp/mst: fix a possible memory leak in fetch_monitor_name()Hangyu Hua1-0/+1
drm_dp_mst_get_edid call kmemdup to create mst_edid. So mst_edid need to be freed after use. Signed-off-by: Hangyu Hua <[email protected]> Reviewed-by: Lyude Paul <[email protected]> Signed-off-by: Lyude Paul <[email protected]> Cc: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2022-05-17parisc: Fix patch code locking and flushingJohn David Anglin1-14/+11
This change fixes the following: 1) The flags variable is not initialized. Always use raw_spin_lock_irqsave and raw_spin_unlock_irqrestore to serialize patching. 2) flush_kernel_vmap_range is primarily intended for DMA flushes. The whole cache flush in flush_kernel_vmap_range is only possible when interrupts are enabled on SMP machines. Since __patch_text_multiple calls flush_kernel_vmap_range with interrupts disabled, it is better to directly call flush_kernel_dcache_range_asm and flush_kernel_icache_range_asm. 3) The final call to flush_icache_range is unnecessary. Tested with `[PATCH, V3] parisc: Rewrite cache flush code for PA8800/PA8900' change on rp3440, c8000 and c3750 (32 and 64-bit). Note by Helge: This patch had been temporarily reverted shortly before v5.18-rc6 in order to fix boot issues. Now it can be re-applied. Signed-off-by: John David Anglin <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2022-05-17parisc: Rewrite cache flush code for PA8800/PA8900John David Anglin3-127/+236
Originally, I was convinced that we needed to use tmpalias flushes everwhere, for both user and kernel flushes. However, when I modified flush_kernel_dcache_page_addr, to use a tmpalias flush, my c8000 would crash quite early when booting. The PDC returns alias values of 0 for the icache and dcache. This indicates that either the alias boundary is greater than 16MB or equivalent aliasing doesn't work. I modified the tmpalias code to make it easy to try alternate boundaries. I tried boundaries up to 128MB but still kernel tmpalias flushes didn't work on c8000. This led me to conclude that tmpalias flushes don't work on PA8800 and PA8900 machines, and that we needed to flush directly using the virtual address of user and kernel pages. This is likely the major cause of instability on the c8000 and rp34xx machines. Flushing user pages requires doing a temporary context switch as we have to flush pages that don't belong to the current context. Further, we have to deal with pages that aren't present. If a page isn't present, the flush instructions fault on every line. Other code has been rearranged and simplified based on testing. For example, I introduced a flush_cache_dup_mm routine. flush_cache_mm and flush_cache_dup_mm differ in that flush_cache_mm calls purge_cache_pages and flush_cache_dup_mm calls flush_cache_pages. In some implementations, pdc is more efficient than fdc. Based on my testing, I don't believe there's any performance benefit on the c8000. Signed-off-by: John David Anglin <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2022-05-17parisc: Disable debug code regarding cache flushes in handle_nadtlb_fault()John David Anglin1-2/+4
Change the "BUG" to "WARNING" and disable the message because it triggers occasionally in spite of the check in flush_cache_page_if_present. The pte value extracted for the "from" page in copy_user_highpage is racy and occasionally the pte is cleared before the flush is complete. I assume that the page is simultaneously flushed by flush_cache_mm before the pte is cleared as nullifying the fdc doesn't seem to cause problems. I investigated various locking scenarios but I wasn't able to find a way to sequence the flushes. This code is called for every COW break and locks impact performance. This patch is related to the bigger cache flush patch because we need the pte on PA8800/PA8900 to flush using the vma context. I have also seen this from copy_to_user_page and copy_from_user_page. The messages appear infrequently when enabled. Signed-off-by: John David Anglin <[email protected]> Signed-off-by: Helge Deller <[email protected]>
2022-05-17clk: at91: generated: consider range when calculating best rateCodrin Ciubotariu1-0/+4
clk_generated_best_diff() helps in finding the parent and the divisor to compute a rate closest to the required one. However, it doesn't take into account the request's range for the new rate. Make sure the new rate is within the required range. Fixes: 8a8f4bf0c480 ("clk: at91: clk-generated: create function to find best_diff") Signed-off-by: Codrin Ciubotariu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Reviewed-by: Claudiu Beznea <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2022-05-17audit,io_uring,io-wq: call __audit_uring_exit for dummy contextsJulian Orth2-1/+7
Not calling the function for dummy contexts will cause the context to not be reset. During the next syscall, this will cause an error in __audit_syscall_entry: WARN_ON(context->context != AUDIT_CTX_UNUSED); WARN_ON(context->name_count); if (context->context != AUDIT_CTX_UNUSED || context->name_count) { audit_panic("unrecoverable error in audit_syscall_entry()"); return; } These problematic dummy contexts are created via the following call chain: exit_to_user_mode_prepare -> arch_do_signal_or_restart -> get_signal -> task_work_run -> tctx_task_work -> io_req_task_submit -> io_issue_sqe -> audit_uring_entry Cc: [email protected] Fixes: 5bd2182d58e9 ("audit,io_uring,io-wq: add some basic audit support to io_uring") Signed-off-by: Julian Orth <[email protected]> [PM: subject line tweaks] Signed-off-by: Paul Moore <[email protected]>
2022-05-17io_uring: don't attempt to IOPOLL for MSG_RING requestsJens Axboe1-0/+3
We gate whether to IOPOLL for a request on whether the opcode is allowed on a ring setup for IOPOLL and if it's got a file assigned. MSG_RING is the only one that allows a file yet isn't pollable, it's merely supported to allow communication on an IOPOLL ring, not because we can poll for completion of it. Put the assigned file early and clear it, so we don't attempt to poll for it. Reported-by: [email protected] Fixes: 3f1d52abf098 ("io_uring: defer msg-ring file validity check until command issue") Signed-off-by: Jens Axboe <[email protected]>
2022-05-17ice: Fix interrupt moderation settings getting clearedMichal Wilczynski2-11/+16
Adaptive-rx and Adaptive-tx are interrupt moderation settings that can be enabled/disabled using ethtool: ethtool -C ethX adaptive-rx on/off adaptive-tx on/off Unfortunately those settings are getting cleared after changing number of queues, or in ethtool world 'channels': ethtool -L ethX rx 1 tx 1 Clearing was happening due to introduction of bit fields in ice_ring_container struct. This way only itr_setting bits were rebuilt during ice_vsi_rebuild_set_coalesce(). Introduce an anonymous struct of bitfields and create a union to refer to them as a single variable. This way variable can be easily saved and restored. Fixes: 61dc79ced7aa ("ice: Restore interrupt throttle settings after VSI rebuild") Signed-off-by: Michal Wilczynski <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-05-17ice: fix possible under reporting of ethtool Tx and Rx statisticsPaul Greenwalt1-3/+4
The hardware statistics counters are not cleared during resets so the drivers first access is to initialize the baseline and then subsequent reads are for reporting the counters. The statistics counters are read during the watchdog subtask when the interface is up. If the baseline is not initialized before the interface is up, then there can be a brief window in which some traffic can be transmitted/received before the initial baseline reading takes place. Directly initialize ethtool statistics in driver open so the baseline will be initialized when the interface is up, and any dropped packets incremented before the interface is up won't be reported. Fixes: 28dc1b86f8ea9 ("ice: ignore dropped packets during init") Signed-off-by: Paul Greenwalt <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-05-17ice: fix crash when writing timestamp on RX ringsArkadiusz Kubalewski1-4/+15
Do not allow to write timestamps on RX rings if PF is being configured. When PF is being configured RX rings can be freed or rebuilt. If at the same time timestamps are updated, the kernel will crash by dereferencing null RX ring pointer. PID: 1449 TASK: ff187d28ed658040 CPU: 34 COMMAND: "ice-ptp-0000:51" #0 [ff1966a94a713bb0] machine_kexec at ffffffff9d05a0be #1 [ff1966a94a713c08] __crash_kexec at ffffffff9d192e9d #2 [ff1966a94a713cd0] crash_kexec at ffffffff9d1941bd #3 [ff1966a94a713ce8] oops_end at ffffffff9d01bd54 #4 [ff1966a94a713d08] no_context at ffffffff9d06bda4 #5 [ff1966a94a713d60] __bad_area_nosemaphore at ffffffff9d06c10c #6 [ff1966a94a713da8] do_page_fault at ffffffff9d06cae4 #7 [ff1966a94a713de0] page_fault at ffffffff9da0107e [exception RIP: ice_ptp_update_cached_phctime+91] RIP: ffffffffc076db8b RSP: ff1966a94a713e98 RFLAGS: 00010246 RAX: 16e3db9c6b7ccae4 RBX: ff187d269dd3c180 RCX: ff187d269cd4d018 RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000 RBP: ff187d269cfcc644 R8: ff187d339b9641b0 R9: 0000000000000000 R10: 0000000000000002 R11: 0000000000000000 R12: ff187d269cfcc648 R13: ffffffff9f128784 R14: ffffffff9d101b70 R15: ff187d269cfcc640 ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018 #8 [ff1966a94a713ea0] ice_ptp_periodic_work at ffffffffc076dbef [ice] #9 [ff1966a94a713ee0] kthread_worker_fn at ffffffff9d101c1b #10 [ff1966a94a713f10] kthread at ffffffff9d101b4d #11 [ff1966a94a713f50] ret_from_fork at ffffffff9da0023f Fixes: 77a781155a65 ("ice: enable receive hardware timestamping") Signed-off-by: Arkadiusz Kubalewski <[email protected]> Reviewed-by: Michal Schmidt <[email protected]> Tested-by: Dave Cain <[email protected]> Tested-by: Gurucharan <[email protected]> (A Contingent worker at Intel) Signed-off-by: Tony Nguyen <[email protected]>
2022-05-17Merge tag 'kvmarm-fixes-5.18-3' of ↵Paolo Bonzini2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 5.18, take #3 - Correctly expose GICv3 support even if no irqchip is created so that userspace doesn't observe it changing pointlessly (fixing a regression with QEMU) - Don't issue a hypercall to set the id-mapped vectors when protected mode is enabled (fix for pKVM in combination with CPUs affected by Spectre-v3a)
2022-05-17arm64: mte: Ensure the cleared tags are visible before setting the PTECatalin Marinas1-0/+3
As an optimisation, only pages mapped with PROT_MTE in user space have the MTE tags zeroed. This is done lazily at the set_pte_at() time via mte_sync_tags(). However, this function is missing a barrier and another CPU may see the PTE updated before the zeroed tags are visible. Add an smp_wmb() barrier if the mapping is Normal Tagged. Signed-off-by: Catalin Marinas <[email protected]> Fixes: 34bfeea4a9e9 ("arm64: mte: Clear the tags when a page is mapped in user-space with PROT_MTE") Cc: <[email protected]> # 5.10.x Reported-by: Vladimir Murzin <[email protected]> Cc: Will Deacon <[email protected]> Reviewed-by: Steven Price <[email protected]> Tested-by: Vladimir Murzin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2022-05-17arm64: kexec: load from kimage prior to clobberingMark Rutland1-7/+15
In arm64_relocate_new_kernel() we load some fields out of the kimage structure after relocation has occurred. As the kimage structure isn't allocated to be relocation-safe, it may be clobbered during relocation, and we may load junk values out of the structure. Due to this, kexec may fail when the kimage allocation happens to fall within a PA range that an object will be relocated to. This has been observed to occur for regular kexec on a QEMU TCG 'virt' machine with 2GiB of RAM, where the PA range of the new kernel image overlaps the kimage structure. Avoid this by ensuring we load all values from the kimage structure prior to relocation. I've tested this atop v5.16 and v5.18-rc6. Fixes: 878fdbd70486 ("arm64: kexec: pass kimage as the only argument to relocation function") Signed-off-by: Mark Rutland <[email protected]> Cc: Catalin Marinas <[email protected]> Cc: James Morse <[email protected]> Cc: Pasha Tatashin <[email protected]> Cc: Will Deacon <[email protected]> Reviewed-by: Pasha Tatashin <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2022-05-17arm64: paravirt: Use RCU read locks to guard stolen_timePrakruthi Deepak Heragu1-8/+21
During hotplug, the stolen time data structure is unmapped and memset. There is a possibility of the timer IRQ being triggered before memset and stolen time is getting updated as part of this timer IRQ handler. This causes the below crash in timer handler - [ 3457.473139][ C5] Unable to handle kernel paging request at virtual address ffffffc03df05148 ... [ 3458.154398][ C5] Call trace: [ 3458.157648][ C5] para_steal_clock+0x30/0x50 [ 3458.162319][ C5] irqtime_account_process_tick+0x30/0x194 [ 3458.168148][ C5] account_process_tick+0x3c/0x280 [ 3458.173274][ C5] update_process_times+0x5c/0xf4 [ 3458.178311][ C5] tick_sched_timer+0x180/0x384 [ 3458.183164][ C5] __run_hrtimer+0x160/0x57c [ 3458.187744][ C5] hrtimer_interrupt+0x258/0x684 [ 3458.192698][ C5] arch_timer_handler_virt+0x5c/0xa0 [ 3458.198002][ C5] handle_percpu_devid_irq+0xdc/0x414 [ 3458.203385][ C5] handle_domain_irq+0xa8/0x168 [ 3458.208241][ C5] gic_handle_irq.34493+0x54/0x244 [ 3458.213359][ C5] call_on_irq_stack+0x40/0x70 [ 3458.218125][ C5] do_interrupt_handler+0x60/0x9c [ 3458.223156][ C5] el1_interrupt+0x34/0x64 [ 3458.227560][ C5] el1h_64_irq_handler+0x1c/0x2c [ 3458.232503][ C5] el1h_64_irq+0x7c/0x80 [ 3458.236736][ C5] free_vmap_area_noflush+0x108/0x39c [ 3458.242126][ C5] remove_vm_area+0xbc/0x118 [ 3458.246714][ C5] vm_remove_mappings+0x48/0x2a4 [ 3458.251656][ C5] __vunmap+0x154/0x278 [ 3458.255796][ C5] stolen_time_cpu_down_prepare+0xc0/0xd8 [ 3458.261542][ C5] cpuhp_invoke_callback+0x248/0xc34 [ 3458.266842][ C5] cpuhp_thread_fun+0x1c4/0x248 [ 3458.271696][ C5] smpboot_thread_fn+0x1b0/0x400 [ 3458.276638][ C5] kthread+0x17c/0x1e0 [ 3458.280691][ C5] ret_from_fork+0x10/0x20 As a fix, introduce rcu lock to update stolen time structure. Fixes: 75df529bec91 ("arm64: paravirt: Initialize steal time when cpu is online") Cc: [email protected] Suggested-by: Will Deacon <[email protected]> Signed-off-by: Prakruthi Deepak Heragu <[email protected]> Signed-off-by: Elliot Berman <[email protected]> Reviewed-by: Srivatsa S. Bhat (VMware) <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Will Deacon <[email protected]>
2022-05-17dma-buf: fix use of DMA_BUF_SET_NAME_{A,B} in userspaceJérôme Pouiller1-2/+2
The typedefs u32 and u64 are not available in userspace. Thus user get an error he try to use DMA_BUF_SET_NAME_A or DMA_BUF_SET_NAME_B: $ gcc -Wall -c -MMD -c -o ioctls_list.o ioctls_list.c In file included from /usr/include/x86_64-linux-gnu/asm/ioctl.h:1, from /usr/include/linux/ioctl.h:5, from /usr/include/asm-generic/ioctls.h:5, from ioctls_list.c:11: ioctls_list.c:463:29: error: ‘u32’ undeclared here (not in a function) 463 | { "DMA_BUF_SET_NAME_A", DMA_BUF_SET_NAME_A, -1, -1 }, // linux/dma-buf.h | ^~~~~~~~~~~~~~~~~~ ioctls_list.c:464:29: error: ‘u64’ undeclared here (not in a function) 464 | { "DMA_BUF_SET_NAME_B", DMA_BUF_SET_NAME_B, -1, -1 }, // linux/dma-buf.h | ^~~~~~~~~~~~~~~~~~ The issue was initially reported here[1]. [1]: https://github.com/jerome-pouiller/ioctl/pull/14 Signed-off-by: Jérôme Pouiller <[email protected]> Reviewed-by: Christian König <[email protected]> Fixes: a5bff92eaac4 ("dma-buf: Fix SET_NAME ioctl uapi") CC: [email protected] Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] Signed-off-by: Christian König <[email protected]>
2022-05-17net: vmxnet3: fix possible NULL pointer dereference in vmxnet3_rq_cleanup()Zixuan Fu1-0/+4
In vmxnet3_rq_create(), when dma_alloc_coherent() fails, vmxnet3_rq_destroy() is called. It sets rq->rx_ring[i].base to NULL. Then vmxnet3_rq_create() returns an error to its callers mxnet3_rq_create_all() -> vmxnet3_change_mtu(). Then vmxnet3_change_mtu() calls vmxnet3_force_close() -> dev_close() in error handling code. And the driver calls vmxnet3_close() -> vmxnet3_quiesce_dev() -> vmxnet3_rq_cleanup_all() -> vmxnet3_rq_cleanup(). In vmxnet3_rq_cleanup(), rq->rx_ring[ring_idx].base is accessed, but this variable is NULL, causing a NULL pointer dereference. To fix this possible bug, an if statement is added to check whether rq->rx_ring[0].base is NULL in vmxnet3_rq_cleanup() and exit early if so. The error log in our fault-injection testing is shown as follows: [ 65.220135] BUG: kernel NULL pointer dereference, address: 0000000000000008 ... [ 65.222633] RIP: 0010:vmxnet3_rq_cleanup_all+0x396/0x4e0 [vmxnet3] ... [ 65.227977] Call Trace: ... [ 65.228262] vmxnet3_quiesce_dev+0x80f/0x8a0 [vmxnet3] [ 65.228580] vmxnet3_close+0x2c4/0x3f0 [vmxnet3] [ 65.228866] __dev_close_many+0x288/0x350 [ 65.229607] dev_close_many+0xa4/0x480 [ 65.231124] dev_close+0x138/0x230 [ 65.231933] vmxnet3_force_close+0x1f0/0x240 [vmxnet3] [ 65.232248] vmxnet3_change_mtu+0x75d/0x920 [vmxnet3] ... Fixes: d1a890fa37f27 ("net: VMware virtual Ethernet NIC driver: vmxnet3") Reported-by: TOTE Robot <[email protected]> Signed-off-by: Zixuan Fu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-05-17net: vmxnet3: fix possible use-after-free bugs in vmxnet3_rq_alloc_rx_buf()Zixuan Fu1-0/+2
In vmxnet3_rq_alloc_rx_buf(), when dma_map_single() fails, rbi->skb is freed immediately. Similarly, in another branch, when dma_map_page() fails, rbi->page is also freed. In the two cases, vmxnet3_rq_alloc_rx_buf() returns an error to its callers vmxnet3_rq_init() -> vmxnet3_rq_init_all() -> vmxnet3_activate_dev(). Then vmxnet3_activate_dev() calls vmxnet3_rq_cleanup_all() in error handling code, and rbi->skb or rbi->page are freed again in vmxnet3_rq_cleanup_all(), causing use-after-free bugs. To fix these possible bugs, rbi->skb and rbi->page should be cleared after they are freed. The error log in our fault-injection testing is shown as follows: [ 14.319016] BUG: KASAN: use-after-free in consume_skb+0x2f/0x150 ... [ 14.321586] Call Trace: ... [ 14.325357] consume_skb+0x2f/0x150 [ 14.325671] vmxnet3_rq_cleanup_all+0x33a/0x4e0 [vmxnet3] [ 14.326150] vmxnet3_activate_dev+0xb9d/0x2ca0 [vmxnet3] [ 14.326616] vmxnet3_open+0x387/0x470 [vmxnet3] ... [ 14.361675] Allocated by task 351: ... [ 14.362688] __netdev_alloc_skb+0x1b3/0x6f0 [ 14.362960] vmxnet3_rq_alloc_rx_buf+0x1b0/0x8d0 [vmxnet3] [ 14.363317] vmxnet3_activate_dev+0x3e3/0x2ca0 [vmxnet3] [ 14.363661] vmxnet3_open+0x387/0x470 [vmxnet3] ... [ 14.367309] [ 14.367412] Freed by task 351: ... [ 14.368932] __dev_kfree_skb_any+0xd2/0xe0 [ 14.369193] vmxnet3_rq_alloc_rx_buf+0x71e/0x8d0 [vmxnet3] [ 14.369544] vmxnet3_activate_dev+0x3e3/0x2ca0 [vmxnet3] [ 14.369883] vmxnet3_open+0x387/0x470 [vmxnet3] [ 14.370174] __dev_open+0x28a/0x420 [ 14.370399] __dev_change_flags+0x192/0x590 [ 14.370667] dev_change_flags+0x7a/0x180 [ 14.370919] do_setlink+0xb28/0x3570 [ 14.371150] rtnl_newlink+0x1160/0x1740 [ 14.371399] rtnetlink_rcv_msg+0x5bf/0xa50 [ 14.371661] netlink_rcv_skb+0x1cd/0x3e0 [ 14.371913] netlink_unicast+0x5dc/0x840 [ 14.372169] netlink_sendmsg+0x856/0xc40 [ 14.372420] ____sys_sendmsg+0x8a7/0x8d0 [ 14.372673] __sys_sendmsg+0x1c2/0x270 [ 14.372914] do_syscall_64+0x41/0x90 [ 14.373145] entry_SYSCALL_64_after_hwframe+0x44/0xae ... Fixes: 5738a09d58d5a ("vmxnet3: fix checks for dma mapping errors") Reported-by: TOTE Robot <[email protected]> Signed-off-by: Zixuan Fu <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-05-17xfrm: set dst dev to blackhole_netdev instead of loopback_dev in ifdownXin Long1-1/+1
The global blackhole_netdev has replaced pernet loopback_dev to become the one given to the object that holds an netdev when ifdown in many places of ipv4 and ipv6 since commit 8d7017fd621d ("blackhole_netdev: use blackhole_netdev to invalidate dst entries"). Especially after commit faab39f63c1f ("net: allow out-of-order netdev unregistration"), it's no longer safe to use loopback_dev that may be freed before other netdev. This patch is to set dst dev to blackhole_netdev instead of loopback_dev in ifdown. v1->v2: - add Fixes tag as Eric suggested. Fixes: faab39f63c1f ("net: allow out-of-order netdev unregistration") Signed-off-by: Xin Long <[email protected]> Reviewed-by: Eric Dumazet <[email protected]> Link: https://lore.kernel.org/r/e8c87482998ca6fcdab214f5a9d582899ec0c648.1652665047.git.lucien.xin@gmail.com Signed-off-by: Paolo Abeni <[email protected]>
2022-05-17net: systemport: Fix an error handling path in bcm_sysport_probe()Christophe JAILLET1-2/+4
if devm_clk_get_optional() fails, we still need to go through the error handling path. Add the missing goto. Fixes: 6328a126896ea ("net: systemport: Manage Wake-on-LAN clock") Signed-off-by: Christophe JAILLET <[email protected]> Acked-by: Florian Fainelli <[email protected]> Link: https://lore.kernel.org/r/99d70634a81c229885ae9e4ee69b2035749f7edc.1652634040.git.christophe.jaillet@wanadoo.fr Signed-off-by: Paolo Abeni <[email protected]>
2022-05-17net: lan966x: Fix assignment of the MAC addressHoratiu Vultur1-0/+28
The following two scenarios were failing for lan966x. 1. If the port had the address X and then trying to assign the same address, then the HW was just removing this address because first it tries to learn new address and then delete the old one. As they are the same the HW remove it. 2. If the port eth0 was assigned the same address as one of the other ports eth1 then when assigning back the address to eth0 then the HW was deleting the address of eth1. The case 1. is fixed by checking if the port has already the same address while case 2. is fixed by checking if the address is used by any other port. Fixes: e18aba8941b40b ("net: lan966x: add mactable support") Signed-off-by: Horatiu Vultur <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Paolo Abeni <[email protected]>
2022-05-17Revert "clk: sunxi-ng: sun6i-rtc: Add support for H6"Jernej Skrabec2-15/+17
This reverts commit 1738890a3165ccd0da98ebd3e2d5f9b230d5afa8. Commit 1738890a3165 ("clk: sunxi-ng: sun6i-rtc: Add support for H6") breaks HDMI output on Tanix TX6 mini board. Exact reason isn't known, but because that commit doesn't actually improve anything, let's just revert it. Cc: [email protected] Signed-off-by: Jernej Skrabec <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Stephen Boyd <[email protected]>
2022-05-17clk: bcm2835: fix bcm2835_clock_choose_divStefan Wahren1-0/+1
The commit 09e3b18ca5de ("clk: bcm2835: Remove unused variable") accidentially breaks the behavior of bcm2835_clock_choose_div() and booting of Raspberry Pi. The removed do_div macro call had side effects, so we need to restore it. Fixes: 09e3b18ca5de ("clk: bcm2835: Remove unused variable") Signed-off-by: Stefan Wahren <[email protected]> Link: https://lore.kernel.org/r/[email protected] Tested-by: Maxime Ripard <[email protected]> Acked-by: Maxime Ripard <[email protected]> Signed-off-by: Stephen Boyd <[email protected]>
2022-05-16Revert "PCI: aardvark: Rewrite IRQ code to chained IRQ handler"Pali Rohár1-26/+22
This reverts commit 1571d67dc190e50c6c56e8f88cdc39f7cc53166e. This commit broke support for setting interrupt affinity. It looks like that it is related to the chained IRQ handler. Revert this commit until issue with setting interrupt affinity is fixed. Fixes: 1571d67dc190 ("PCI: aardvark: Rewrite IRQ code to chained IRQ handler") Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Pali Rohár <[email protected]> Signed-off-by: Bjorn Helgaas <[email protected]>
2022-05-16ptp: ocp: have adjtime handle negative delta_ns correctlyJonathan Lemon1-2/+3
delta_ns is a s64, but it was being passed ptp_ocp_adjtime_coarse as an u64. Also, it turns out that timespec64_add_ns() only handles positive values, so perform the math with set_normalized_timespec(). Fixes: 90f8f4c0e3ce ("ptp: ocp: Add ptp_ocp_adjtime_coarse for large adjustments") Suggested-by: Vadim Fedorenko <[email protected]> Signed-off-by: Jonathan Lemon <[email protected]> Acked-by: Vadim Fedorenko <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Jakub Kicinski <[email protected]>
2022-05-16netfilter: nft_flow_offload: fix offload with pppoe + vlanFelix Fietkau1-1/+2
When running a combination of PPPoE on top of a VLAN, we need to set info->outdev to the PPPoE device, otherwise PPPoE encap is skipped during software offload. Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support") Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-05-16net: fix dev_fill_forward_path with pppoe + bridgeFelix Fietkau3-2/+3
When calling dev_fill_forward_path on a pppoe device, the provided destination address is invalid. In order for the bridge fdb lookup to succeed, the pppoe code needs to update ctx->daddr to the correct value. Fix this by storing the address inside struct net_device_path_ctx Fixes: f6efc675c9dd ("net: ppp: resolve forwarding path for bridge pppoe devices") Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-05-16netfilter: nft_flow_offload: skip dst neigh lookup for ppp devicesFelix Fietkau1-9/+13
The dst entry does not contain a valid hardware address, so skip the lookup in order to avoid running into errors here. The proper hardware address is filled in from nft_dev_path_info Fixes: 72efd585f714 ("netfilter: flowtable: add pppoe support") Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-05-16netfilter: flowtable: fix excessive hw offload attempts after failureFelix Fietkau1-1/+3
If a flow cannot be offloaded, the code currently repeatedly tries again as quickly as possible, which can significantly increase system load. Fix this by limiting flow timeout update and hardware offload retry to once per second. Fixes: c07531c01d82 ("netfilter: flowtable: Remove redundant hw refresh bit") Signed-off-by: Felix Fietkau <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2022-05-16net/sched: act_pedit: sanitize shift argument before usagePaolo Abeni1-0/+4
syzbot was able to trigger an Out-of-Bound on the pedit action: UBSAN: shift-out-of-bounds in net/sched/act_pedit.c:238:43 shift exponent 1400735974 is too large for 32-bit type 'unsigned int' CPU: 0 PID: 3606 Comm: syz-executor151 Not tainted 5.18.0-rc5-syzkaller-00165-g810c2f0a3f86 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: <TASK> __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106 ubsan_epilogue+0xb/0x50 lib/ubsan.c:151 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x187 lib/ubsan.c:322 tcf_pedit_init.cold+0x1a/0x1f net/sched/act_pedit.c:238 tcf_action_init_1+0x414/0x690 net/sched/act_api.c:1367 tcf_action_init+0x530/0x8d0 net/sched/act_api.c:1432 tcf_action_add+0xf9/0x480 net/sched/act_api.c:1956 tc_ctl_action+0x346/0x470 net/sched/act_api.c:2015 rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5993 netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2502 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x543/0x7f0 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:705 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:725 ____sys_sendmsg+0x6e2/0x800 net/socket.c:2413 ___sys_sendmsg+0xf3/0x170 net/socket.c:2467 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2496 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7fe36e9e1b59 Code: 28 c3 e8 2a 14 00 00 66 2e 0f 1f 84 00 00 00 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007ffef796fe88 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fe36e9e1b59 RDX: 0000000000000000 RSI: 0000000020000300 RDI: 0000000000000003 RBP: 00007fe36e9a5d00 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 00007fe36e9a5d90 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 </TASK> The 'shift' field is not validated, and any value above 31 will trigger out-of-bounds. The issue predates the git history, but syzbot was able to trigger it only after the commit mentioned in the fixes tag, and this change only applies on top of such commit. Address the issue bounding the 'shift' value to the maximum allowed by the relevant operator. Reported-and-tested-by: [email protected] Fixes: 8b796475fd78 ("net/sched: act_pedit: really ensure the skb is writable") Signed-off-by: Paolo Abeni <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2022-05-16ALSA: usb-audio: Restore Rane SL-1 quirkTakashi Iwai1-0/+9
At cleaning up and moving the device rename from the quirk table to its own table, we removed the entry for Rane SL-1 as we thought it's only for renaming. It turned out, however, that the quirk is required for matching with the device that declares itself as no standard audio but only as vendor-specific. Restore the quirk entry for Rane SL-1 to fix the regression. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215887 Fixes: 5436f59bc5bc ("ALSA: usb-audio: Move device rename and profile quirks to an internal table") Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-05-16Merge tag 'linux-can-fixes-for-5.18-20220514' of ↵David S. Miller3-65/+10
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2022-05-14 this is a pull request of 2 patches for net/master. Changes to linux-can-fixes-for-5.18-20220513: - adjusted Fixes: Tag on "Revert "can: m_can: pci: use custom bit timings for Elkhart Lake"" (Thanks Jakub) Both patches are by Jarkko Nikula, target the m_can PCI driver bindings, and fix usage of wrong bit timing constants for the Elkhart Lake platform. ==================== Signed-off-by: David S. Miller <[email protected]>
2022-05-16ALSA: hda/realtek: fix right sounds and mute/micmute LEDs for HP machineAndy Chi1-0/+1
The HP EliteBook 630 is using ALC236 codec which used 0x02 to control mute LED and 0x01 to control micmute LED. Therefore, add a quirk to make it works. Signed-off-by: Andy Chi <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2022-05-16xfrm: fix "disable_policy" flag use when arriving from different devicesEyal Birger3-6/+32
In IPv4 setting the "disable_policy" flag on a device means no policy should be enforced for traffic originating from the device. This was implemented by seting the DST_NOPOLICY flag in the dst based on the originating device. However, dsts are cached in nexthops regardless of the originating devices, in which case, the DST_NOPOLICY flag value may be incorrect. Consider the following setup: +------------------------------+ | ROUTER | +-------------+ | +-----------------+ | | ipsec src |----|-|ipsec0 | | +-------------+ | |disable_policy=0 | +----+ | | +-----------------+ |eth1|-|----- +-------------+ | +-----------------+ +----+ | | noipsec src |----|-|eth0 | | +-------------+ | |disable_policy=1 | | | +-----------------+ | +------------------------------+ Where ROUTER has a default route towards eth1. dst entries for traffic arriving from eth0 would have DST_NOPOLICY and would be cached and therefore can be reused by traffic originating from ipsec0, skipping policy check. Fix by setting a IPSKB_NOPOLICY flag in IPCB and observing it instead of the DST in IN/FWD IPv4 policy checks. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Shmulik Ladkani <[email protected]> Signed-off-by: Eyal Birger <[email protected]> Signed-off-by: Steffen Klassert <[email protected]>
2022-05-16i915/guc/reset: Make __guc_reset_context aware of guilty enginesUmesh Nerlige Ramappa5-12/+12
There are 2 ways an engine can get reset in i915 and the method of reset affects how KMD labels a context as guilty/innocent. (1) GuC initiated engine-reset: GuC resets a hung engine and notifies KMD. The context that hung on the engine is marked guilty and all other contexts are innocent. The innocent contexts are resubmitted. (2) GT based reset: When an engine heartbeat fails to tick, KMD initiates a gt/chip reset. All active contexts are marked as guilty and discarded. In order to correctly mark the contexts as guilty/innocent, pass a mask of engines that were reset to __guc_reset_context. Fixes: eb5e7da736f3 ("drm/i915/guc: Reset implementation for new GuC interface") Signed-off-by: Umesh Nerlige Ramappa <[email protected]> Reviewed-by: Alan Previn <[email protected]> Signed-off-by: John Harrison <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 303760aa914b7f5ac9602dbb4b471a2ad52eeb3e) Signed-off-by: Joonas Lahtinen <[email protected]>
2022-05-16drm/i915/dmc: Add MMIO range restrictionsAnusha Srivatsa2-0/+60
Bspec has added some steps that check forDMC MMIO range before programming them v2: Fix for CI v3: move register defines to .h (Anusha) - Check MMIO restrictions per pipe - Add MMIO restricton for v1 dmc header as well (Lucas) v4: s/_PICK/_PICK_EVEN and use it only for Pipe DMC scenario. - clean up sanity check logic.(Lucas) - Add MMIO range for RKL as well.(Anusha) v5: Use DISPLAY_VER instead of per platform check (Lucas) BSpec: 49193 Cc: [email protected] Cc: Lucas De Marchi <[email protected]> Signed-off-by: Anusha Srivatsa <[email protected]> Reviewed-by: Lucas De Marchi <[email protected]> Signed-off-by: Lucas De Marchi <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit 21c47196aec3a93f913a7515e1e7b30e6c54d6c6) Signed-off-by: Joonas Lahtinen <[email protected]>
2022-05-15Linux 5.18-rc7Linus Torvalds1-1/+1
2022-05-15Merge tag 'driver-core-5.18-rc7' of ↵Linus Torvalds2-3/+21
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core fixes from Greg KH: "Here is one fix, and three documentation updates for 5.18-rc7. The fix is for the firmware loader which resolves a long-reported problem where the credentials of the firmware loader could be set to a userspace process without enough permissions to actually load the firmware image. Many Android vendors have been reporting this for quite some time. The documentation updates are for the embargoed-hardware-issues.rst file to add a new entry, change an existing one, and sort the list to make changes easier in the future. All of these have been in linux-next for a while with no reported issues" * tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: Documentation/process: Update ARM contact for embargoed hardware issues Documentation/process: Add embargoed HW contact for Ampere Computing Documentation/process: Make groups alphabetical and use tabs consistently firmware_loader: use kernel credentials when reading firmware
2022-05-15Merge tag 'char-misc-5.18-rc7' of ↵Linus Torvalds2-3/+9
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are two small driver fixes for 5.18-rc7 that resolve reported problems: - slimbus driver irq bugfix - interconnect sync state bugfix Both of these have been in linux-next with no reported problems" * tag 'char-misc-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: slimbus: qcom: Fix IRQ check in qcom_slim_probe interconnect: Restore sync state by ignoring ipa-virt in provider count
2022-05-15Merge tag 'tty-5.18-rc7' of ↵Linus Torvalds4-29/+43
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty Pull tty/serial driver fixes from Greg KH: "Here are some small tty n_gsm and serial driver fixes for 5.18-rc7 that resolve reported problems. They include: - n_gsm fixes for reported issues - 8250_mtk driver fixes for some platforms - fsl_lpuart driver fix for reported problem. - digicolor driver fix for reported problem. All have been in linux-next for a while with no reported problems" * tag 'tty-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: fsl_lpuart: Don't enable interrupts too early tty: n_gsm: fix invalid gsmtty_write_room() result tty: n_gsm: fix mux activation issues in gsm_config() tty: n_gsm: fix buffer over-read in gsm_dlci_data() serial: 8250_mtk: Fix register address for XON/XOFF character serial: 8250_mtk: Make sure to select the right FEATURE_SEL serial: 8250_mtk: Fix UART_EFR register address tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
2022-05-15Merge tag 'usb-5.18-rc7' of ↵Linus Torvalds13-75/+86
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB fixes from Greg KH: "Here are some small fixes for reported issues with some USB drivers. They include: - xhci fixes for xhci-mtk platform driver - typec driver fixes for reported problems. - cdc-wdm read-stuck fix - gadget driver fix for reported race condition - new usb-serial driver ids All of these have been in linux-next with no reported problems" * tag 'usb-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: usb: xhci-mtk: remove bandwidth budget table usb: xhci-mtk: fix fs isoc's transfer error usb: gadget: fix race when gadget driver register via ioctl usb: typec: tcpci_mt6360: Update for BMC PHY setting usb: gadget: uvc: allow for application to cleanly shutdown usb: typec: tcpci: Don't skip cleanup in .remove() on error usb: cdc-wdm: fix reading stuck on device close USB: serial: qcserial: add support for Sierra Wireless EM7590 USB: serial: option: add Fibocom MA510 modem USB: serial: option: add Fibocom L610 modem USB: serial: pl2303: add device id for HP LM930 Display
2022-05-15Merge tag 'powerpc-5.18-5' of ↵Linus Torvalds1-5/+21
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fix from Michael Ellerman: - Fix KVM PR on 32-bit, which was broken by some MMU code refactoring. Thanks to: Alexander Graf, and Matt Evans. * tag 'powerpc-5.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: KVM: PPC: Book3S PR: Enable MSR_DR for switch_mmu_context()
Powered by cgit, Gruvboxed by Blaster4385.