Age | Commit message (Collapse) | Author | Files | Lines |
|
To align with other platforms, set only the sdev->dsp_box.offset in
bdw_probe().
The mailbox offset must be set in order to be able to receive the firmware
ready message.
The offsets and sizes will be re-configured after the FW ready message
based on the window information.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
from Peter Ujfalusi <[email protected]>:
Hi,
dma_engine, dma_size and resindex_dma_base is unused from sof_dev_desc, drop
them.
resindex_dma_base is initialized to -1 for Intel platforms, but it is not used.
Regards,
Peter
---
Peter Ujfalusi (2):
ASoC: SOF: intel: Do no initialize resindex_dma_base
ASoC: SOF: Drop resindex_dma_base, dma_engine, dma_size from
sof_dev_desc
include/sound/sof.h | 5 -----
sound/soc/sof/intel/pci-apl.c | 2 --
sound/soc/sof/intel/pci-cnl.c | 3 ---
sound/soc/sof/intel/pci-icl.c | 2 --
sound/soc/sof/intel/pci-tgl.c | 5 -----
sound/soc/sof/intel/pci-tng.c | 1 -
6 files changed, 18 deletions(-)
--
2.33.0
|
|
Peter Ujfalusi <[email protected]>:
Hi,
Small cleanups regarding to HDA function locations and dropping of definitions
of not implemented functions.
Regards,
Peter
---
Peter Ujfalusi (3):
ASoC: SOF: Intel: hda-dsp: Declare locally used functions as static
ASoC: SOF: Intel: hda: Remove boot_firmware skl and iccmax_icl
declarations
ASoC: SOF: Intel: hda: Relocate inline definitions from hda.h to hda.c
for sdw
sound/soc/sof/intel/hda-dsp.c | 61 +++++++++++++++++------------------
sound/soc/sof/intel/hda.c | 33 ++++++++++++++++++-
sound/soc/sof/intel/hda.h | 41 -----------------------
3 files changed, 62 insertions(+), 73 deletions(-)
--
2.33.0
|
|
Support the ALC5682I-VS codec in Intel's rt5682 machine driver with
three board configurations.
Brent Lu (4):
ASoC: Intel: sof_rt5682: support ALC5682I-VS codec
ASoC: intel: sof_rt5682: support jsl_rt5682s_rt1015p board
ASoC: intel: sof_rt5682: support jsl_rt5682s_rt1015 board
ASoC: intel: sof_rt5682: support jsl_rt5682s_mx98360a board
sound/soc/intel/boards/Kconfig | 1 +
sound/soc/intel/boards/sof_rt5682.c | 105 +++++++++++++++---
.../intel/common/soc-acpi-intel-jsl-match.c | 24 ++++
3 files changed, 112 insertions(+), 18 deletions(-)
--
2.25.1
|
|
Signed-off-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
It is not idiomatic for ASoC to print the function name in the error
messages, however it is expected to show the return code. Update the
error messages to follow these conventions.
Signed-off-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
In multiple places the driver overwrites the error code returned with
a static error code, this is not helpful for debugging. Update to pass
the error codes straight through.
Signed-off-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
cs35l41 is often connected over I2C which is a very slow bus, as such
timings can be greatly improved combining writes where acceptable.
Update several points where the driver does multiple register writes
when a single one would suffice.
Signed-off-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Just clean up the code a little by using the helper rather than open
coding waiting for OTP_BOOT_DONE.
Signed-off-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The loop checking PDN_DONE doesn't check the return value from
regmap_read, nor does it initialise val. This means if regmap_read fails
val will be checked for the PDN_DONE bit whilst being uninitialised.
Fix this up by switching to regmap_read_poll_timeout which tidies up the
code and avoids the uninitialised variable.
Signed-off-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
mt6359-sound is a MFD driver. Because its regmap is retrieved from its
parent, it shouldn't be freed in mt6359-sound driver.
snd_soc_component_exit_regmap() will do regmap_exit(), this results in
unexpected results if sound card unregister flow is invoked when users
try to bind/unbind audio codec.
Remove the usage of snd_soc_component_exit_regmap(). Instead, set
component->regmap = NULL in the component remove function.
Signed-off-by: Trevor Wu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Since the load_firmware callback in snd_sof_dsp_ops is mandatory and it
is tested during probe.
Move the snd_sof_load_firmware() wrapper to ops.h as inline and drop the
check of sof_ops(sdev)->load_firmware
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Don't populate the array adda_dai_list on the stack but instead it
static const. Also makes the object code smaller by 33 bytes:
Before:
text data bss dec hex filename
28271 11640 0 39911 9be7 mt8195/mt8195-dai-adda.o
After:
text data bss dec hex filename
28142 11736 0 39878 9bc6 mt8195/mt8195-dai-adda.o
(gcc version 11.2.0)
Signed-off-by: Colin Ian King <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The platform_node is returned by of_parse_phandle() should have
of_node_put() before return.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Bixuan Cui <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Move the only locally needed inline functions to hda.c when
CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE is not enabled to make the header file
less cluttered with information no needed to be there.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
hda_dsp_cl_boot_firmware_iccmax_icl and hda_dsp_cl_boot_firmware_skl is
no longer backed with an implementation, remove them from the hda.h
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The following functions can be made static as they are only used locally:
hda_dsp_core_reset_enter
hda_dsp_core_reset_leave
hda_dsp_core_stall_reset
hda_dsp_core_power_up
hda_dsp_core_power_down
hda_dsp_core_is_enabled
The hda_dsp_ipc_int_disable is also only used within hda-dsp.c, but for
symmetry for hda_dsp_ipc_int_enable (used by hda-loader.c) leave it as it
is.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
resindex_dma_base, dma_engine and dma_size is unused, remove them.
There is no hint in the comments how this supposed to be used, when the
need arises it can be added back.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
.resindex_dma_base is not used by the code and in all instances it is set
to -1.
To make it possible to remove it from the sof_dev_desc struct, first remove
all references from the intel drivers (initialization).
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
This patch adds driver data for two MAX98360A speaker amplifiers on SSP1
and one ALC5682I-VS headphone codec on SSP0 for JSL platform.
Topology is leveraged from jsl_rt5682_mx98360a since the capability of
two ALC5682 variants is the same.
Signed-off-by: Brent Lu <[email protected]>
Acked-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
This patch adds driver data for two ALC1015Q-CG speaker amplifiers on
SSP1 and one ALC5682I-VS headphone codec on SSP0 for JSL platform.
Topology is leveraged from jsl_rt5682_rt1015 since the capability of
two ALC5682 variants is the same.
Signed-off-by: Brent Lu <[email protected]>
Acked-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
This patch adds driver data for two ALC1015Q-VB speaker amplifiers on
SSP1 and one ALC5682I-VS headphone codec on SSP0 for JSL platform.
Topology is leveraged from jsl_rt5682_rt1015p since the capability of
two ALC5682 variants is the same.
Signed-off-by: Brent Lu <[email protected]>
Acked-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add a new quirk SOF_RT5682S_HEADPHONE_CODEC_PRESENT to support
ALC5682I-VS headphone codec which driver is a new one, rt5682s, with
new macros and functions.
Signed-off-by: Brent Lu <[email protected]>
Acked-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
<[email protected]>:
These patches fixup or update for rockchip pdm.
Changes in v4:
- Acked by Rob Herring
Changes in v3:
- Fix property 'path-map' suggested by Rob Herring.
Changes in v2:
- Fix yamllint errors.
Sugar Zhang (7):
ASoC: rockchip: Add support for rv1126 pdm
ASoC: dt-bindings: rockchip: Add binding for rv1126 pdm
ASoC: rockchip: pdm: Add support for rk3568 pdm
ASoC: dt-bindings: rockchip: Add binding for rk3568 pdm
ASoC: rockchip: pdm: Add support for path map
ASoC: dt-bindings: rockchip: pdm: Document property
'rockchip,path-map'
ASoC: dt-bindings: rockchip: Convert pdm bindings to yaml
.../devicetree/bindings/sound/rockchip,pdm.txt | 46 --------
.../devicetree/bindings/sound/rockchip,pdm.yaml | 120 +++++++++++++++++++++
sound/soc/rockchip/rockchip_pdm.c | 112 +++++++++++++++++--
sound/soc/rockchip/rockchip_pdm.h | 6 ++
4 files changed, 232 insertions(+), 52 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/rockchip,pdm.txt
create mode 100644 Documentation/devicetree/bindings/sound/rockchip,pdm.yaml
--
2.7.4
|
|
<[email protected]>:
ASoC driver and devicetree documentation for a new
Cirrus Logic amplifier CS35L41
v7 changes:
Remove property 'classh-bst-max-limit'
David Rhodes (2):
ASoC: cs35l41: CS35L41 Boosted Smart Amplifier
ASoC: cs35l41: Add bindings for CS35L41
.../devicetree/bindings/sound/cs35l41.yaml | 151 ++
include/sound/cs35l41.h | 34 +
sound/soc/codecs/Kconfig | 12 +
sound/soc/codecs/Makefile | 4 +
sound/soc/codecs/cs35l41-i2c.c | 114 ++
sound/soc/codecs/cs35l41-spi.c | 143 ++
sound/soc/codecs/cs35l41-tables.c | 597 +++++++
sound/soc/codecs/cs35l41.c | 1545 +++++++++++++++++
sound/soc/codecs/cs35l41.h | 775 +++++++++
9 files changed, 3375 insertions(+)
create mode 100644 Documentation/devicetree/bindings/sound/cs35l41.yaml
create mode 100644 include/sound/cs35l41.h
create mode 100644 sound/soc/codecs/cs35l41-i2c.c
create mode 100644 sound/soc/codecs/cs35l41-spi.c
create mode 100644 sound/soc/codecs/cs35l41-tables.c
create mode 100644 sound/soc/codecs/cs35l41.c
create mode 100644 sound/soc/codecs/cs35l41.h
--
2.25.1
|
|
<[email protected]>:
Hi,
Here's another round of schema warnings fixes for the Allwinner platform.
There's a fair share of new schemas in there since the schema tools now warn
when a compatible is not documented in a schema.
We don't have any warning anymore if we use the OPP binding Rob submitted, and
since that means we have all our devices properly validated I don't expect more
fixes now, aside from the usual bunch of regressions.
Let me know what you think,
Maxime
Maxime Ripard (52):
ASoC: dt-bindings: Add WM8978 Binding
ASoC: dt-bindings: Convert Bluetooth SCO Link binding to a schema
ASoC: dt-bindings: Convert SPDIF Transmitter binding to a schema
ASoC: dt-bindings: Convert Simple Amplifier binding to a schema
dt-bindings: Convert Reserved Memory binding to a schema
dt-bindings: arm: Convert ARM CCI-400 binding to a schema
dt-bindings: bluetooth: broadcom: Fix clocks check
dt-bindings: bluetooth: realtek: Add missing max-speed
dt-bindings: clocks: Fix typo in the H6 compatible
dt-bindings: display: Move idk-1110wr to panel-lvds
dt-bindings: display: Move idk-2121wr to panel-lvds
dt-bindings: display: Move ee101ia-01d to panel-lvds
dt-bindings: display: aa104xd12: Remove unused vcc-supply
dt-bindings: display: aa104xd12: Fix data-mapping
dt-bindings: display: Move aa104xd12 to panel-lvds
dt-bindings: display: aa121td01: Remove unused vcc-supply
dt-bindings: display: aa121td01: Fix data-mapping
dt-bindings: display: Move aa121td01 to panel-lvds
dt-bindings: display: Move gktw70sdae4se to panel-lvds
dt-bindings: display: panel-lvds: Document missing panel compatibles
dt-bindings: gnss: Convert UBlox Neo-6M binding to a schema
dt-bindings: gpio: Convert X-Powers AXP209 GPIO binding to a schema
dt-bindings: hwmon: Add IIO HWMON binding
dt-bindings: input: Convert Silead GSL1680 binding to a schema
dt-bindings: interconnect: sunxi: Add R40 MBUS compatible
dt-bindings: media: ti,cal: Fix example
dt-bindings: media: Convert OV5640 binding to a schema
dt-bindings: mfd: Convert X-Powers AC100 binding to a schema
dt-bindings: mfd: Convert X-Powers AXP binding to a schema
dt-bindings: mmc: Convert MMC Card binding to a schema
dt-bindings: net: dwmac: Fix typo in the R40 compatible
dt-bindings: net: wireless: Convert ESP ESP8089 binding to a schema
dt-bindings: regulator: Convert SY8106A binding to a schema
dt-bindings: sunxi: Add CPU Configuration Controller Binding
dt-bindings: sunxi: Add Allwinner A80 PRCM Binding
dt-bindings: usb: Convert SMSC USB3503 binding to a schema
dt-bindings: usb: dwc3: Fix usb-phy check
dt-bindings: w1: Convert 1-Wire GPIO binding to a schema
ARM: dts: sunxi: Rename power-supply names
ARM: dts: sunxi: Rename gpio pinctrl names
ARM: dts: sunxi: Fix OPP arrays
ARM: dts: sunxi: Fix OPPs node name
ARM: dts: sunxi: Fix the SPI NOR node names
ARM: dts: v3s: Remove useless DMA properties
ARM: dts: tbs711: Fix touchscreen compatible
ARM: dts: cubieboard4: Remove the dumb-vga-dac compatible
arm64: dts: allwinner: h5: Fix GPU thermal zone node name
arm64: dts: allwinner: h6: Fix de3 parent clocks ordering
arm64: dts: allwinner: a100: Fix thermal zone node name
arm64: dts: allwinner: pinetab: Change regulator node name to avoid
warning
arm64: dts: allwinner: teres-i: Add missing reg
arm64: dts: allwinner: teres-i: Remove wakekup-source from the PMIC
.../devicetree/bindings/arm/arm,cci-400.yaml | 216 ++++++++++
.../bindings/arm/cci-control-port.yaml | 38 ++
Documentation/devicetree/bindings/arm/cci.txt | 224 ----------
.../devicetree/bindings/arm/cpus.yaml | 2 +
.../arm/sunxi/allwinner,sun4i-a10-mbus.yaml | 1 +
.../sunxi/allwinner,sun6i-a31-cpuconfig.yaml | 38 ++
.../arm/sunxi/allwinner,sun9i-a80-prcm.yaml | 33 ++
.../clock/allwinner,sun8i-a83t-de2-clk.yaml | 2 +-
.../display/panel/advantech,idk-1110wr.yaml | 69 ---
.../display/panel/advantech,idk-2121wr.yaml | 121 ------
.../display/panel/innolux,ee101ia-01d.yaml | 31 --
.../bindings/display/panel/lvds.yaml | 130 +++++-
.../display/panel/mitsubishi,aa104xd12.yaml | 75 ----
.../display/panel/mitsubishi,aa121td01.yaml | 74 ----
.../display/panel/sgd,gktw70sdae4se.yaml | 68 ---
.../bindings/gnss/u-blox,neo-6m.yaml | 62 +++
.../devicetree/bindings/gnss/u-blox.txt | 45 --
.../devicetree/bindings/gpio/gpio-axp209.txt | 75 ----
.../bindings/gpio/x-powers,axp209-gpio.yaml | 55 +++
.../devicetree/bindings/hwmon/iio-hwmon.yaml | 37 ++
.../i2c/allwinner,sun6i-a31-p2wi.yaml | 2 +-
.../input/touchscreen/silead,gsl1680.yaml | 91 ++++
.../input/touchscreen/silead_gsl1680.txt | 44 --
.../devicetree/bindings/media/i2c/ov5640.txt | 92 ----
.../bindings/media/i2c/ovti,ov5640.yaml | 154 +++++++
.../devicetree/bindings/media/ti,cal.yaml | 4 +-
.../devicetree/bindings/mfd/ac100.txt | 50 ---
.../devicetree/bindings/mfd/axp20x.txt | 273 ------------
.../bindings/mfd/x-powers,ac100.yaml | 116 +++++
.../bindings/mfd/x-powers,axp152.yaml | 400 ++++++++++++++++++
.../devicetree/bindings/mmc/mmc-card.txt | 30 --
.../devicetree/bindings/mmc/mmc-card.yaml | 48 +++
.../bindings/mmc/mmc-controller.yaml | 6 -
.../net/allwinner,sun8i-a83t-emac.yaml | 4 +-
.../bindings/net/broadcom-bluetooth.yaml | 17 +-
.../bindings/net/realtek-bluetooth.yaml | 2 +
.../devicetree/bindings/net/snps,dwmac.yaml | 6 +-
.../bindings/net/wireless/esp,esp8089.txt | 30 --
.../bindings/net/wireless/esp,esp8089.yaml | 43 ++
.../bindings/regulator/silergy,sy8106a.yaml | 52 +++
.../bindings/regulator/sy8106a-regulator.txt | 23 -
.../reserved-memory/memory-region.yaml | 40 ++
.../reserved-memory/reserved-memory.txt | 172 +-------
.../reserved-memory/reserved-memory.yaml | 96 +++++
.../reserved-memory/shared-dma-pool.yaml | 87 ++++
.../devicetree/bindings/sound/bt-sco.txt | 13 -
.../bindings/sound/linux,bt-sco.yaml | 38 ++
.../bindings/sound/linux,spdif-dit.yaml | 32 ++
.../bindings/sound/simple-amplifier.txt | 17 -
.../sound/simple-audio-amplifier.yaml | 45 ++
.../bindings/sound/spdif-transmitter.txt | 10 -
.../devicetree/bindings/sound/wlf,wm8978.yaml | 58 +++
.../devicetree/bindings/usb/smsc,usb3503.yaml | 108 +++++
.../devicetree/bindings/usb/snps,dwc3.yaml | 10 +-
.../devicetree/bindings/usb/usb3503.txt | 39 --
.../devicetree/bindings/w1/w1-gpio.txt | 27 --
.../devicetree/bindings/w1/w1-gpio.yaml | 44 ++
arch/arm/boot/dts/axp209.dtsi | 6 +-
arch/arm/boot/dts/axp22x.dtsi | 6 +-
arch/arm/boot/dts/axp81x.dtsi | 10 +-
.../arm/boot/dts/sun4i-a10-olinuxino-lime.dts | 11 +-
arch/arm/boot/dts/sun4i-a10.dtsi | 11 +-
arch/arm/boot/dts/sun5i-a13.dtsi | 15 +-
arch/arm/boot/dts/sun6i-a31.dtsi | 44 +-
arch/arm/boot/dts/sun7i-a20-bananapi.dts | 17 +-
arch/arm/boot/dts/sun7i-a20.dtsi | 34 +-
arch/arm/boot/dts/sun8i-a33.dtsi | 4 +-
arch/arm/boot/dts/sun8i-a83t-tbs-a711.dts | 2 +-
arch/arm/boot/dts/sun8i-a83t.dtsi | 4 +-
arch/arm/boot/dts/sun8i-h3.dtsi | 4 +-
arch/arm/boot/dts/sun8i-v3-sl631.dtsi | 2 +-
arch/arm/boot/dts/sun8i-v3s.dtsi | 2 -
arch/arm/boot/dts/sun9i-a80-cubieboard4.dts | 2 +-
.../boot/dts/sunxi-libretech-all-h3-it.dtsi | 2 +-
arch/arm64/boot/dts/allwinner/axp803.dtsi | 10 +-
.../arm64/boot/dts/allwinner/sun50i-a100.dtsi | 6 +-
.../dts/allwinner/sun50i-a64-cpu-opp.dtsi | 2 +-
.../dts/allwinner/sun50i-a64-orangepi-win.dts | 2 +-
.../boot/dts/allwinner/sun50i-a64-pinetab.dts | 2 +-
.../boot/dts/allwinner/sun50i-a64-teres-i.dts | 3 +-
.../boot/dts/allwinner/sun50i-h5-cpu-opp.dtsi | 2 +-
arch/arm64/boot/dts/allwinner/sun50i-h5.dtsi | 2 +-
.../boot/dts/allwinner/sun50i-h6-cpu-opp.dtsi | 2 +-
arch/arm64/boot/dts/allwinner/sun50i-h6.dtsi | 8 +-
84 files changed, 2191 insertions(+), 1743 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/arm,cci-400.yaml
create mode 100644 Documentation/devicetree/bindings/arm/cci-control-port.yaml
delete mode 100644 Documentation/devicetree/bindings/arm/cci.txt
create mode 100644 Documentation/devicetree/bindings/arm/sunxi/allwinner,sun6i-a31-cpuconfig.yaml
create mode 100644 Documentation/devicetree/bindings/arm/sunxi/allwinner,sun9i-a80-prcm.yaml
delete mode 100644 Documentation/devicetree/bindings/display/panel/advantech,idk-1110wr.yaml
delete mode 100644 Documentation/devicetree/bindings/display/panel/advantech,idk-2121wr.yaml
delete mode 100644 Documentation/devicetree/bindings/display/panel/innolux,ee101ia-01d.yaml
delete mode 100644 Documentation/devicetree/bindings/display/panel/mitsubishi,aa104xd12.yaml
delete mode 100644 Documentation/devicetree/bindings/display/panel/mitsubishi,aa121td01.yaml
delete mode 100644 Documentation/devicetree/bindings/display/panel/sgd,gktw70sdae4se.yaml
create mode 100644 Documentation/devicetree/bindings/gnss/u-blox,neo-6m.yaml
delete mode 100644 Documentation/devicetree/bindings/gnss/u-blox.txt
delete mode 100644 Documentation/devicetree/bindings/gpio/gpio-axp209.txt
create mode 100644 Documentation/devicetree/bindings/gpio/x-powers,axp209-gpio.yaml
create mode 100644 Documentation/devicetree/bindings/hwmon/iio-hwmon.yaml
create mode 100644 Documentation/devicetree/bindings/input/touchscreen/silead,gsl1680.yaml
delete mode 100644 Documentation/devicetree/bindings/input/touchscreen/silead_gsl1680.txt
delete mode 100644 Documentation/devicetree/bindings/media/i2c/ov5640.txt
create mode 100644 Documentation/devicetree/bindings/media/i2c/ovti,ov5640.yaml
delete mode 100644 Documentation/devicetree/bindings/mfd/ac100.txt
delete mode 100644 Documentation/devicetree/bindings/mfd/axp20x.txt
create mode 100644 Documentation/devicetree/bindings/mfd/x-powers,ac100.yaml
create mode 100644 Documentation/devicetree/bindings/mfd/x-powers,axp152.yaml
delete mode 100644 Documentation/devicetree/bindings/mmc/mmc-card.txt
create mode 100644 Documentation/devicetree/bindings/mmc/mmc-card.yaml
delete mode 100644 Documentation/devicetree/bindings/net/wireless/esp,esp8089.txt
create mode 100644 Documentation/devicetree/bindings/net/wireless/esp,esp8089.yaml
create mode 100644 Documentation/devicetree/bindings/regulator/silergy,sy8106a.yaml
delete mode 100644 Documentation/devicetree/bindings/regulator/sy8106a-regulator.txt
create mode 100644 Documentation/devicetree/bindings/reserved-memory/memory-region.yaml
create mode 100644 Documentation/devicetree/bindings/reserved-memory/reserved-memory.yaml
create mode 100644 Documentation/devicetree/bindings/reserved-memory/shared-dma-pool.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/bt-sco.txt
create mode 100644 Documentation/devicetree/bindings/sound/linux,bt-sco.yaml
create mode 100644 Documentation/devicetree/bindings/sound/linux,spdif-dit.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/simple-amplifier.txt
create mode 100644 Documentation/devicetree/bindings/sound/simple-audio-amplifier.yaml
delete mode 100644 Documentation/devicetree/bindings/sound/spdif-transmitter.txt
create mode 100644 Documentation/devicetree/bindings/sound/wlf,wm8978.yaml
create mode 100644 Documentation/devicetree/bindings/usb/smsc,usb3503.yaml
delete mode 100644 Documentation/devicetree/bindings/usb/usb3503.txt
delete mode 100644 Documentation/devicetree/bindings/w1/w1-gpio.txt
create mode 100644 Documentation/devicetree/bindings/w1/w1-gpio.yaml
--
2.31.1
|
|
<[email protected]>:
Following are the changes:
- Add json-schema for 'sound-name-prefix' documentation under
'name-perfix.yaml'
- Use schema references wherever needed.
- Remove txt based doc
Changelog
=========
v2 -> v3
--------
* Removed examples in patch 1/3 as suggested by Rob
* Added reviewed tag from Jerome for the series
* Added reviewed tag from Rob for patch 2/3
v1 -> v2
--------
* Provide top reference to name-prefix.yaml as suggested by Rob
for patch 2/3
* Dropped couple of unreachable email ids from Cc list in commit
message of patch 2/3
* No changes in remaining patches
Sameer Pujar (3):
ASoC: Add json-schema documentation for sound-name-prefix
ASoC: Use schema reference for sound-name-prefix
ASoC: Remove name-prefix.txt
.../devicetree/bindings/sound/name-prefix.txt | 24 ----------------------
.../devicetree/bindings/sound/name-prefix.yaml | 21 +++++++++++++++++++
.../bindings/sound/nvidia,tegra186-dspk.yaml | 9 +++-----
.../bindings/sound/nvidia,tegra210-dmic.yaml | 9 +++-----
.../bindings/sound/nvidia,tegra210-i2s.yaml | 9 +++-----
.../devicetree/bindings/sound/nxp,tfa989x.yaml | 9 +++-----
Documentation/devicetree/bindings/sound/rt5659.txt | 2 +-
.../bindings/sound/simple-audio-mux.yaml | 9 +++-----
8 files changed, 37 insertions(+), 55 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/name-prefix.txt
create mode 100644 Documentation/devicetree/bindings/sound/name-prefix.yaml
--
2.7.4
|
|
the pcm5102a is capable of 384k, but the current code limits it to 192k.
This commit extends to 384k
Signed-off-by: gearhead <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add i2s reference control for rt1011 amp.
Signed-off-by: Jack Yu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
If the value/data associated with a control changes in SOF it will send a
notification (SOF_IPC_GLB_COMP_MSG with SOF_IPC_COMP_GET_VALUE/DATA).
We have support for binary volatile control type, but we might have
features where enum/switch/volume changes. Re-implementing everything as
volatile as well would be not much of a gain for several reasons:
- volatile controls would do an IPC all the time, regardless if there is a
need or not.
- We still don't have notification which forces userspace to continuously
poll.
When such notification arrives we use snd_ctl_notify_one() to signal
userspace about the change.
The kernel is prepared for two types of notification:
- the notification carries the new data for the control (num_elems != 0)
The new value/data is copied to the control's local data
- blank message about a change
The new flag for the scontrol (comp_data_dirty) is set and when next
time user space reads the value via the kcontrol's get callback we will
refresh the control's local data from the firmware.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Tested-by: Seppo Ingalsuo <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The unnecessary conditional inclusion caused the following warning.
>> sound/soc/mediatek/mt8195/mt8195-afe-pcm.c:3260:32: warning: unused
>> variable 'mt8195_afe_pm_ops' [-Wunused-const-variable]
static const struct dev_pm_ops mt8195_afe_pm_ops = {
^
1 warning generated.
Because runtime_pm already handles the case without CONFIG_PM, we
can remove CONFIG_PM condition.
Fixes: 6746cc858259 ("ASoC: mediatek: mt8195: add platform driver")
Signed-off-by: Trevor Wu <[email protected]>
Reported-by: kernel test robot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
SOF_CTRL_TYPE_VALUE_CHAN_SET should be used for put operations
for consistency. The current use of _GET is obviously incorrect
but _GET and _SET result in the same action so there is no
functional change introduced by this patch.
Signed-off-by: Rander Wang <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Signed-off-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Each platform has different supported rates and
formats, so add soc specific data for each platform.
This soc specific data is attached with compatible string.
Signed-off-by: Shengjiu Wang <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The following build error is seen with CONFIG_PM=n.
drivers/spi/spi-tegra20-slink.c:1188:12: error:
'tegra_slink_runtime_suspend' defined but not used
drivers/spi/spi-tegra20-slink.c:1200:12: error:
'tegra_slink_runtime_resume' defined but not used
Declare the functions only if PM is enabled. While at it, remove the
unnecessary forward declarations.
Signed-off-by: Guenter Roeck <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Add header defining for lpass internal digital codecs rx,tx and va
dai node id's.
Signed-off-by: Srinivasa Rao Mandadapu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Realtek ALC5682I-VS codec is a ALC5682I-VD variant which supports I2C only.
Signed-off-by: Derek Fang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
This is an initial codec driver for Realtek ALC5682I-VS codec.
Signed-off-by: Derek Fang <[email protected]>
Signed-off-by: Derek Fang <[email protected]<mailto:[email protected]>>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The pointer etdm_data is being inintialized with a value that is never
read, it is later being re-assigned a new value. Remove the redundant
initialization.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <[email protected]>
Acked-by: Trevor Wu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Kconfig generates include/generated/autoconf.h to make CONFIG options
available to the pre-processor. Symbols with the value 'm' are suffixed
with '_MODULE'
Here is a conflict; CONFIG_FOO=m results in '#define CONFIG_FOO_MODULE 1',
but CONFIG_FOO_MODULE=y also results in the same define.
Also, CONFIG options that end with '_MODULE' confuse the Kconfig/fixdep
interaction; fixdep always assumes CONFIG_FOO_MODULE comes from
CONFIG_FOO=m, so the dependency is not properly tracked for symbols
that end with '_MODULE'.
For these reasons, CONFIG options that end with '_MODULE' should be
avoided in general. (I am planning on adding a check in Kconfig.)
This is the only case in the current kernel.
The new option name was suggested by Péter Ujfalusi. [1]
[1] https://lore.kernel.org/all/[email protected]/
Fixes: 147162f57515 ("ASoC: ti: fix SND_SOC_DM365_VOICE_CODEC dependencies")
Signed-off-by: Masahiro Yamada <[email protected]>
Acked-by: Peter Ujfalusi <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Most distributions do not enable the SOF developer options and
specifically the DMA trace. This is problematic for end-user/community
support since the sof-logger tool cannot extract valuable information.
Conversely in rare cases the DMA trace can lead to Heisenbugs by
creating more traffic to system memory and more interrupts.
This patch changes the logic so that the Kconfig value is used as a
default value for a module parameter, but this value can be changed as
needed. Users can override the distro DMA trace selection.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Ranjani Sridharan <[email protected]>
Reviewed-by: Daniel Baluta <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
devm_platform_ioremap_resource()
Use the devm_platform_ioremap_resource() helper instead of
calling platform_get_resource() and devm_ioremap_resource()
separately
Signed-off-by: Cai Huoqing <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
A DAPM widget now can have different types of controls, it is no longer
correct to print the type as it is just the type of the first control.
Move it after the loop where we create the controls and print the number
of the control types.
Signed-off-by: Peter Ujfalusi <[email protected]>
Reviewed-by: Kai Vehmanen <[email protected]>
Reviewed-by: Pierre-Louis Bossart <[email protected]>
Reviewed-by: Guennadi Liakhovetski <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Sparse reports the following warning:
sound/soc/amd/acp-pcm-dma.c:39:6: error: symbol 'bt_uart_enable' was
not declared. Should it be static?
It's not very good practice to export such symbols that can easily
conflict, add the acp_ prefix and add declaration in header file.
Signed-off-by: Pierre-Louis Bossart <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
irqs_lock is not used, never was.
Remove irqs_lock.
Fixes: 283b612429a27 ("ASoC: mediatek: implement mediatek common structure")
Cc: Liam Girdwood <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Jaroslav Kysela <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: Matthias Brugger <[email protected]>
Signed-off-by: Sebastian Andrzej Siewior <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Simple audio amplifiers are supported by Linux with a matching device
tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: [email protected]
Cc: Jerome Brunet <[email protected]>
Cc: Liam Girdwood <[email protected]>
Cc: Mark Brown <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
The SPDIF Transmitter binding is used by Linux with a matching Device
Tree binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: [email protected]
Cc: Liam Girdwood <[email protected]>
Cc: Mark Brown <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Bluetooth SCO Link are supported by Linux with a matching device tree
binding.
Now that we have the DT validation in place, let's convert the device
tree bindings for that driver over to a YAML schema.
Cc: [email protected]
Cc: [email protected]
Cc: Liam Girdwood <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: Samuel Holland <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Even though we had the wm8978 driver for some time and a number of
boards using it already, we never had a binding for it. Let's add it
based on what the driver expects and the boards are providing.
Cc: [email protected]
Cc: [email protected]
Cc: Liam Girdwood <[email protected]>
Cc: Mark Brown <[email protected]>
Cc: [email protected]
Reviewed-by: Rob Herring <[email protected]>
Signed-off-by: Maxime Ripard <[email protected]>
Acked-by: Charles Keepax <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Since schema name-prefix.yaml is available and references are updated,
remove txt based doc.
Signed-off-by: Sameer Pujar <[email protected]>
Cc: Jerome Brunet <[email protected]>
Cc: Rob Herring <[email protected]>
Reviewed-by: Jerome Brunet <[email protected]>
Acked-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|
|
Use schema reference for 'sound-name-prefix' property wherever
necessary.
Signed-off-by: Sameer Pujar <[email protected]>
Cc: Jerome Brunet <[email protected]>
Cc: Stephan Gerhold <[email protected]>
Cc: Rob Herring <[email protected]>
Reviewed-by: Jerome Brunet <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Mark Brown <[email protected]>
|