| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
This adds support for virtio-net to vduse.
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
When request_irq() fails, error path calls vp_del_vqs(). There, as vq is
present in the list, free_irq() is called for the same vector. That
causes following splat:
[ 0.414355] Trying to free already-free IRQ 27
[ 0.414403] WARNING: CPU: 1 PID: 1 at kernel/irq/manage.c:1899 free_irq+0x1a1/0x2d0
[ 0.414510] Modules linked in:
[ 0.414540] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 6.9.0-rc4+ #27
[ 0.414540] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.16.3-1.fc39 04/01/2014
[ 0.414540] RIP: 0010:free_irq+0x1a1/0x2d0
[ 0.414540] Code: 1e 00 48 83 c4 08 48 89 e8 5b 5d 41 5c 41 5d 41 5e 41 5f c3 cc cc cc cc 90 8b 74 24 04 48 c7 c7 98 80 6c b1 e8 00 c9 f7 ff 90 <0f> 0b 90 90 48 89 ee 4c 89 ef e8 e0 20 b8 00 49 8b 47 40 48 8b 40
[ 0.414540] RSP: 0000:ffffb71480013ae0 EFLAGS: 00010086
[ 0.414540] RAX: 0000000000000000 RBX: ffffa099c2722000 RCX: 0000000000000000
[ 0.414540] RDX: 0000000000000000 RSI: ffffb71480013998 RDI: 0000000000000001
[ 0.414540] RBP: 0000000000000246 R08: 00000000ffffdfff R09: 0000000000000001
[ 0.414540] R10: 00000000ffffdfff R11: ffffffffb18729c0 R12: ffffa099c1c91760
[ 0.414540] R13: ffffa099c1c916a4 R14: ffffa099c1d2f200 R15: ffffa099c1c91600
[ 0.414540] FS: 0000000000000000(0000) GS:ffffa099fec40000(0000) knlGS:0000000000000000
[ 0.414540] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 0.414540] CR2: 0000000000000000 CR3: 0000000008e3e001 CR4: 0000000000370ef0
[ 0.414540] Call Trace:
[ 0.414540] <TASK>
[ 0.414540] ? __warn+0x80/0x120
[ 0.414540] ? free_irq+0x1a1/0x2d0
[ 0.414540] ? report_bug+0x164/0x190
[ 0.414540] ? handle_bug+0x3b/0x70
[ 0.414540] ? exc_invalid_op+0x17/0x70
[ 0.414540] ? asm_exc_invalid_op+0x1a/0x20
[ 0.414540] ? free_irq+0x1a1/0x2d0
[ 0.414540] vp_del_vqs+0xc1/0x220
[ 0.414540] vp_find_vqs_msix+0x305/0x470
[ 0.414540] vp_find_vqs+0x3e/0x1a0
[ 0.414540] vp_modern_find_vqs+0x1b/0x70
[ 0.414540] init_vqs+0x387/0x600
[ 0.414540] virtnet_probe+0x50a/0xc80
[ 0.414540] virtio_dev_probe+0x1e0/0x2b0
[ 0.414540] really_probe+0xc0/0x2c0
[ 0.414540] ? __pfx___driver_attach+0x10/0x10
[ 0.414540] __driver_probe_device+0x73/0x120
[ 0.414540] driver_probe_device+0x1f/0xe0
[ 0.414540] __driver_attach+0x88/0x180
[ 0.414540] bus_for_each_dev+0x85/0xd0
[ 0.414540] bus_add_driver+0xec/0x1f0
[ 0.414540] driver_register+0x59/0x100
[ 0.414540] ? __pfx_virtio_net_driver_init+0x10/0x10
[ 0.414540] virtio_net_driver_init+0x90/0xb0
[ 0.414540] do_one_initcall+0x58/0x230
[ 0.414540] kernel_init_freeable+0x1a3/0x2d0
[ 0.414540] ? __pfx_kernel_init+0x10/0x10
[ 0.414540] kernel_init+0x1a/0x1c0
[ 0.414540] ret_from_fork+0x31/0x50
[ 0.414540] ? __pfx_kernel_init+0x10/0x10
[ 0.414540] ret_from_fork_asm+0x1a/0x30
[ 0.414540] </TASK>
Fix this by calling deleting the current vq when request_irq() fails.
Fixes: 0b0f9dc52ed0 ("Revert "virtio_pci: use shared interrupts for virtqueues"")
Signed-off-by: Jiri Pirko <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Add myself as a reviewer of some VirtIO areas I'm interested.
Until this point I've been scanning manually the list looking for
series that touches this area. Adding myself to make this task easier.
Signed-off-by: Eugenio Pérez <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
ida_alloc() and ida_free() should be preferred to the deprecated
ida_simple_get() and ida_simple_remove().
Note that the upper limit of ida_simple_get() is exclusive, but the one of
ida_alloc_max() is inclusive. So a -1 has been added when needed.
Signed-off-by: Christophe JAILLET <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Message-Id: <67c2edf49788c27d5f7a49fc701520b9fcf739b5.1713088999.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Jason Wang <[email protected]>
|
|
When there is a ctlq and it doesn't require interrupt
callbacks,the original method of calculating vectors
wastes hardware msi or msix resources as well as system
IRQ resources.
When conducting performance testing using testpmd in the
guest os, it was found that the performance was lower compared
to directly using vfio-pci to passthrough the device
In scenarios where the virtio device in the guest os does
not utilize interrupts, the vdpa driver still configures
the hardware's msix vector. Therefore, the hardware still
sends interrupts to the host os. Because of this unnecessary
action by the hardware, hardware performance decreases, and
it also affects the performance of the host os.
Before modification:(interrupt mode)
32: 0 0 0 0 PCI-MSI 32768-edge vp-vdpa[0000:00:02.0]-0
33: 0 0 0 0 PCI-MSI 32769-edge vp-vdpa[0000:00:02.0]-1
34: 0 0 0 0 PCI-MSI 32770-edge vp-vdpa[0000:00:02.0]-2
35: 0 0 0 0 PCI-MSI 32771-edge vp-vdpa[0000:00:02.0]-config
After modification:(interrupt mode)
32: 0 0 1 7 PCI-MSI 32768-edge vp-vdpa[0000:00:02.0]-0
33: 36 0 3 0 PCI-MSI 32769-edge vp-vdpa[0000:00:02.0]-1
34: 0 0 0 0 PCI-MSI 32770-edge vp-vdpa[0000:00:02.0]-config
Before modification:(virtio pmd mode for guest os)
32: 0 0 0 0 PCI-MSI 32768-edge vp-vdpa[0000:00:02.0]-0
33: 0 0 0 0 PCI-MSI 32769-edge vp-vdpa[0000:00:02.0]-1
34: 0 0 0 0 PCI-MSI 32770-edge vp-vdpa[0000:00:02.0]-2
35: 0 0 0 0 PCI-MSI 32771-edge vp-vdpa[0000:00:02.0]-config
After modification:(virtio pmd mode for guest os)
32: 0 0 0 0 PCI-MSI 32768-edge vp-vdpa[0000:00:02.0]-config
To verify the use of the virtio PMD mode in the guest operating
system, the following patch needs to be applied to QEMU:
https://lore.kernel.org/all/[email protected]
Signed-off-by: Yuxue Liu <[email protected]>
Acked-by: Jason Wang <[email protected]>
Reviewed-by: Heng Qi <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Anton Yakovlev <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Stefan Hajnoczi <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Stefan Hajnoczi <[email protected]>
Acked-by: Martin K. Petersen <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Reviewed-by: Mathieu Poirier <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Acked-by: Dave Jiang <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Pankaj Gupta <[email protected]
Reviewed-by: Pankaj Gupta <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Acked-by: Stefano Garzarella <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Stefan Hajnoczi <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Alexander Graf <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Acked-by: Bartosz Golaszewski <[email protected]>
Acked-by: Viresh Kumar <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Linus Walleij <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Sudeep Holla <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Herbert Xu <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Reviewed-by: Stefan Hajnoczi <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Acked-by: Johannes Berg <[email protected]>
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
virtio core already sets the .owner, so driver does not need to.
Signed-off-by: Krzysztof Kozlowski <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Treat stats requests as wakeup events to ensure that the driver responds
to device requests in a timely manner.
Signed-off-by: David Stevens <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Wakeup sources don't support nesting multiple events, so sharing a
single object between multiple drivers can result in one driver
overriding the wakeup event processing period specified by another
driver. Have the virtio balloon driver use the wakeup source of the
device it is bound to rather than the wakeup source of the parent
device, to avoid conflicts with the transport layer.
Note that although the virtio balloon's virtio_device itself isn't what
actually wakes up the device, it is responsible for processing wakeup
events. In the same way that EPOLLWAKEUP uses a dedicated wakeup_source
to prevent suspend when userspace is processing wakeup events, a
dedicated wakeup_source is necessary when processing wakeup events in a
higher layer in the kernel.
Fixes: b12fbc3f787e ("virtio_balloon: stay awake while adjusting balloon")
Signed-off-by: David Stevens <[email protected]>
Acked-by: David Hildenbrand <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
With virtio-mem, primarily hibernation is problematic: as the machine shuts
down, the virtio-mem device loses its state. Powering the machine back up
is like losing a bunch of DIMMs. While there would be ways to add limited
support, suspend+resume is more commonly used for VMs and "easier" to
support cleanly.
s2idle can be supported without any device dependencies. Similarly, one
would expect suspend-to-ram (i.e., S3) to work out of the box. However,
QEMU currently unplugs all device memory when resuming the VM, using a
cold reset on the "wakeup" path. In order to support S3, we need a feature
flag for the device to tell us if memory remains plugged when waking up. In
the future, QEMU will implement this feature.
So let's always support s2idle and support S3 with plugged memory only if
the device indicates support. Block hibernation early using the PM
notifier.
Trying to hibernate now fails early:
# echo disk > /sys/power/state
[ 26.455369] PM: hibernation: hibernation entry
[ 26.458271] virtio_mem virtio0: hibernation is not supported.
[ 26.462498] PM: hibernation: hibernation exit
-bash: echo: write error: Operation not permitted
s2idle works even without the new feature bit:
# echo s2idle > /sys/power/mem_sleep
# echo mem > /sys/power/state
[ 52.083725] PM: suspend entry (s2idle)
[ 52.095950] Filesystems sync: 0.010 seconds
[ 52.101493] Freezing user space processes
[ 52.104213] Freezing user space processes completed (elapsed 0.001 seconds)
[ 52.106520] OOM killer disabled.
[ 52.107655] Freezing remaining freezable tasks
[ 52.110880] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 52.113296] printk: Suspending console(s) (use no_console_suspend to debug)
S3 does not work without the feature bit when memory is plugged:
# echo deep > /sys/power/mem_sleep
# echo mem > /sys/power/state
[ 32.788281] PM: suspend entry (deep)
[ 32.816630] Filesystems sync: 0.027 seconds
[ 32.820029] Freezing user space processes
[ 32.823870] Freezing user space processes completed (elapsed 0.001 seconds)
[ 32.827756] OOM killer disabled.
[ 32.829608] Freezing remaining freezable tasks
[ 32.833842] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 32.837953] printk: Suspending console(s) (use no_console_suspend to debug)
[ 32.916172] virtio_mem virtio0: suspend+resume with plugged memory is not supported
[ 32.916181] virtio-pci 0000:00:02.0: PM: pci_pm_suspend(): virtio_pci_freeze+0x0/0x50 returns -1
[ 32.916197] virtio-pci 0000:00:02.0: PM: dpm_run_callback(): pci_pm_suspend+0x0/0x170 returns -1
[ 32.916210] virtio-pci 0000:00:02.0: PM: failed to suspend async: error -1
But S3 works with the new feature bit when memory is plugged (patched
QEMU):
# echo deep > /sys/power/mem_sleep
# echo mem > /sys/power/state
[ 33.983694] PM: suspend entry (deep)
[ 34.009828] Filesystems sync: 0.024 seconds
[ 34.013589] Freezing user space processes
[ 34.016722] Freezing user space processes completed (elapsed 0.001 seconds)
[ 34.019092] OOM killer disabled.
[ 34.020291] Freezing remaining freezable tasks
[ 34.023549] Freezing remaining freezable tasks completed (elapsed 0.001 seconds)
[ 34.026090] printk: Suspending console(s) (use no_console_suspend to debug)
Cc: "Michael S. Tsirkin" <[email protected]>
Cc: Jason Wang <[email protected]>
Cc: Xuan Zhuo <[email protected]>
Signed-off-by: David Hildenbrand <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
This removes the signal/coredump hacks added for vhost_tasks in:
Commit f9010dbdce91 ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression")
When that patch was added vhost_tasks did not handle SIGKILL and would
try to ignore/clear the signal and continue on until the device's close
function was called. In the previous patches vhost_tasks and the vhost
drivers were converted to support SIGKILL by cleaning themselves up and
exiting. The hacks are no longer needed so this removes them.
Signed-off-by: Mike Christie <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Instead of lingering until the device is closed, this has us handle
SIGKILL by:
1. marking the worker as killed so we no longer try to use it with
new virtqueues and new flush operations.
2. setting the virtqueue to worker mapping so no new works are queued.
3. running all the exiting works.
Suggested-by: Edward Adam Davis <[email protected]>
Reported-and-tested-by: [email protected]
Message-Id: <[email protected]>
Signed-off-by: Mike Christie <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
In the next patches where the worker can be killed while in use, we
need to be able to take the worker mutex and kill queued works for
new IO and flushes, and set some new flags to prevent new
__vhost_vq_attach_worker calls from swapping in/out killed workers.
If we are holding the worker mutex during a flush and the flush's work
is still in the queue, the worker code that will handle the SIGKILL
cleanup won't be able to take the mutex and perform it's cleanup. So
this patch has us drop the worker mutex while waiting for the flush
to complete.
Signed-off-by: Mike Christie <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
__vhost_vq_attach_worker uses the vhost_dev mutex to serialize the
swapping of a virtqueue's worker. This was done for simplicity because
we are already holding that mutex.
In the next patches where the worker can be killed while in use, we need
finer grained locking because some drivers will hold the vhost_dev mutex
while flushing. However in the SIGKILL handler in the next patches, we
will need to be able to swap workers (set current one to NULL), kill
queued works and stop new flushes while flushes are in progress.
To prepare us, this has us use the virtqueue mutex for swapping workers
instead of the vhost_dev one.
Signed-off-by: Mike Christie <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
vhost_vq_work_queue will never fail when queueing the TMF's response
handling because a guest can only send us TMFs when the device is fully
setup so there is always a worker at that time. In the next patches we
will modify the worker code so it handles SIGKILL by exiting before
outstanding commands/TMFs have sent their responses. In that case
vhost_vq_work_queue can fail when we try to send a response.
This has us just free the TMF's resources since at this time the guest
won't be able to get a response even if we could send it.
Signed-off-by: Mike Christie <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
vhost_vq_flush is no longer used so remove it.
Signed-off-by: Mike Christie <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
We flush all the workers that are not also used by the ctl vq to make
sure that responses queued by LIO before the TMF response are sent
before the TMF response. This requires a special vhost_vq_flush
function which, in the next patches where we handle SIGKILL killing
workers while in use, will require extra locking/complexity. To avoid
that, this patch has us flush the entire device from the system work
queue, then queue up sending the response from there.
This is a little less optimal since we now flush all workers but this
will be ok since commands have already timed out and perf is not a
concern.
Signed-off-by: Mike Christie <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
In the next patches we will support the vhost_task being killed while in
use. The problem for vhost-scsi is that we can't free some structs until
we get responses for commands we have submitted to the target layer and
we currently process the responses from the vhost_task.
This has just drop the responses and free the command's resources. When
all commands have completed then operations like flush will be woken up
and we can complete device release and endpoint cleanup.
Signed-off-by: Mike Christie <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Currently, we can try to queue an event's work before the vhost_task is
created. When this happens we just drop it in vhost_scsi_do_plug before
even calling vhost_vq_work_queue. During a device shutdown we do the
same thing after vhost_scsi_clear_endpoint has cleared the backends.
In the next patches we will be able to kill the vhost_task before we
have cleared the endpoint. In that case, vhost_vq_work_queue can fail
and we will leak the event's memory. This has handle the failure by
just freeing the event. This is safe to do, because
vhost_vq_work_queue will only return failure for us when the vhost_task
is killed and so userspace will not be able to handle events if we
sent them.
Signed-off-by: Mike Christie <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
Per filesystems/sysfs.rst, show() should only use sysfs_emit()
or sysfs_emit_at() when formatting the value to be returned to user space.
coccinelle complains that there are still a couple of functions that use
snprintf(). Convert them to sysfs_emit().
sprintf() will be converted as weel if they have.
Generally, this patch is generated by
make coccicheck M=<path/to/file> MODE=patch \
COCCI=scripts/coccinelle/api/device_attr_show.cocci
No functional change intended
CC: "Michael S. Tsirkin" <[email protected]>
CC: Jason Wang <[email protected]>
CC: Xuan Zhuo <[email protected]>
CC: [email protected]
Signed-off-by: Li Zhijian <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
In the vp_vdpa_set_status function, when setting the device status to
VIRTIO_CONFIG_S_DRIVER_OK, the vp_vdpa_request_irq function may fail.
In such cases, the device status should not be set to DRIVER_OK. Add
exception printing to remind the user.
Signed-off-by: Yuxue Liu <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
The .remove() callback for a platform driver returns an int which makes
many driver authors wrongly assume it's possible to do error handling by
returning an error code. However the value returned is ignored (apart
from emitting a warning) and this typically results in resource leaks.
To improve here there is a quest to make the remove callback return
void. In the first step of this quest all drivers are converted to
.remove_new(), which already returns void. Eventually after all drivers
are converted, .remove_new() will be renamed to .remove().
Trivially convert this driver from always returning zero in the remove
callback to the void returning variant.
Signed-off-by: Uwe Kleine-König <[email protected]>
Message-Id: <ef71f955531d5e41b20d801e1149bb08d155679a.1709886922.git.u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael S. Tsirkin <[email protected]>
|
|
This commit applies maintainer role of Intel vDPA
driver for myself.
I am the author of this driver and have been contributing to
it for long time, I would like to help this solution evolve
in future.
This driver is still under virtio maintenance.
Signed-off-by: Zhu Lingshan <[email protected]>
Message-Id: <[email protected]>
Signed-off-by: Michael S. Tsirkin <[email protected]>
Acked-by: Jason Wang <[email protected]>
|
|
Pull kvm fix from Paolo Bonzini:
"A pretty straightforward fix for a NULL pointer dereference, plus the
accompanying reproducer"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: selftests: Add test for uaccesses to non-existent vgic-v2 CPUIF
KVM: arm64: vgic-v2: Check for non-NULL vCPU in vgic_v2_parse_attr()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.9, part #2
- Fix + test for a NULL dereference resulting from unsanitised user
input in the vgic-v2 device attribute accessors
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply
Pull power supply fixes from Sebastian Reichel:
- mt6360_charger: Fix of_match for usb-otg-vbus regulator
- rt9455: Fix unused-const-variable for !CONFIG_USB_PHY
* tag 'for-v6.9-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply:
power: supply: mt6360_charger: Fix of_match for usb-otg-vbus regulator
power: rt9455: hide unused rt9455_boost_voltage_values
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fix from Ilpo Järvinen:
- Add Grand Ridge to HPM CPU list
* tag 'platform-drivers-x86-v6.9-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: ISST: Add Grand Ridge to HPM CPU list
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fixes from Linus Walleij:
- Fix a double-free in the pinctrl_enable() errorpath
- Fix a refcount leak in pinctrl_dt_to_map()
- Fix selecting the GPIO pin control state and the UART3 pin config
group in the Intel Baytrail driver
- Fix readback of schmitt trigger status in the Mediatek Paris driver,
along with some semantic pin config issues in this driver
- Fix a pin suffix typo in the Meson A1 driver
- Fix an erroneous register offset in he Aspeed G6 driver
- Fix an inconsistent lock state and the interrupt type on resume in
the Renesas RZG2L driver
- Fix some minor confusion in the Renesas DT bindings
* tag 'pinctrl-v6.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: renesas: rzg2l: Configure the interrupt type on resume
pinctrl: devicetree: fix refcount leak in pinctrl_dt_to_map()
pinctrl: baytrail: Add pinconf group for uart3
pinctrl: baytrail: Fix selecting gpio pinctrl state
pinctrl: mediatek: paris: Rework support for PIN_CONFIG_{INPUT,OUTPUT}_ENABLE
pinctrl: mediatek: paris: Fix PIN_CONFIG_INPUT_SCHMITT_ENABLE readback
pinctrl: core: delete incorrect free in pinctrl_enable()
pinctrl/meson: fix typo in PDM's pin name
pinctrl: pinctrl-aspeed-g6: Fix register offset for pinconf of GPIOR-T
pinctrl: renesas: rzg2l: Execute atomically the interrupt configuration
dt-bindings: pinctrl: renesas,rzg2l-pinctrl: Allow 'input' and 'output-enable' properties
|