| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
The following set of patches provides modifications targeting support of
multiple RapidIO master port (mport) devices on a CPU-side of
RapidIO-capable board. While the RapidIO subsystem code has definitions
suitable for multi-controller/multi-net support, the existing
implementation cannot be considered ready for multiple mport
configurations.
=========== NOTES: =============
a) The patches below do not address RapidIO side view of multiport
processing elements defined in Part 6 of RapidIO spec Rev.2.1 (section
6.4.1). These devices have Base Device ID CSR (0x60) and Component Tag
CSR (0x6C) shared by all SRIO ports. For example, Freescale's P4080,
P3041 and P5020 have a dual-port SRIO controller implemented according
the specification. Enumeration/discovery of such devices from RapidIO
side may require device-specific fixups.
b) Devices referenced above may also require implementation specific
code to setup a host device ID for mport device. These operations are
not addressed by patches in this package.
=================================
Details about provided patches:
1. Fix blocking wait for discovery ready
While it does not happen on PowerPC based platforms, there is
possibility of stalled CPU warning dump on x86 based platforms that run
RapidIO discovery process if they wait too long for being enumerated.
Currently users can avoid it by disabling the soft-lockup detector
using "nosoftlockup" kernel parameter OR by ensuring that enumeration
is completed before soft-lockup is detected.
This patch eliminates blocking wait and keeps a scheduler running.
It also is required for patch 3 below which introduces asynchronous
discovery process.
2. Use device lists handling on per-net basis
This patch allows to correctly support multiple RapidIO nets and
resolves possible issues caused by using single global list of devices
during RapidIO system enumeration/discovery. The most common sign of
existing issue is incorrect contents of switch routing tables in
systems with multiple mport controllers while single-port configuration
performs as expected.
The patch does not eliminate the global RapidIO device list but
changes some routines in enumeration/discovery to use per-net device
lists instead. This way compatibility with upper layer RIO routines is
preserved.
3. Run discovery as an asynchronous process
This patch modifies RapidIO initialization routine to asynchronously
run the discovery process for each corresponding mport. This allows
having an arbitrary order of enumerating and discovering mports without
creating a deadlock situation if an enumerator port was registered
after a discovering one.
On boards with multiple discovering mports it also eliminates order
dependency between mports and may reduce total time of RapidIO
subsystem initialization.
Making netID matching to mportID ensures consistent netID assignment
in multiport RapidIO systems with asynchronous discovery process
(global counter implementation is affected by race between threads).
4. Rework RIONET to support multiple RIO master ports
In the current version of the driver rionet_probe() has comment "XXX
Make multi-net safe". Now it is a good time to address this comment.
This patch makes RIONET driver multi-net safe/capable by introducing
per-net lists of RapidIO network peers. It also enables to register
network adapters for all available mport devices.
5. Add destination ID allocation mechanism
The patch replaces a single global destination ID counter with
per-net allocation mechanism to allow independent destID management for
each available RapidIO network. Using bitmap based mechanism instead
of counters allows destination ID release and reuse in systems that
support hot-swap.
This patch:
Fix blocking wait loop in the RapidIO discovery routine to avoid warning
dumps about stalled CPU on x86 platforms.
Signed-off-by: Alexandre Bounine <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Li Yang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Apply port RX/TX enable operations only to active switch ports.
RapidIO specification (Part 6: LP-Serial Physical Layer) recommends to
keep Output Port Enable (TX) and Input Port Enable (RX) control bits in
disabled state (0b0) after device reset. It also allows to have
implementation specific reset state for these bits.
This patch ensures that TX/RX enable action is applied only to active
switch's ports while preserving an initial state of inactive ones.
This patch is intended to keep inactive switch ports with inbound and
outbound packet transfers disabled to block unexpected packets during hot
insertion event. While it does not fix any visible malfunction it is
intended to prevent such events in future.
Signed-off-by: Alexandre Bounine <[email protected]>
Cc: Matt Porter <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add Tsi721 routines to support RapidIO subsystem's inbound memory mapping
interface (RapidIO to system's local memory).
Signed-off-by: Alexandre Bounine <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Li Yang <[email protected]>
Cc: Kumar Gala <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add common inbound memory mapping/unmapping interface. This allows to make
local memory space accessible from the RapidIO side using hardware mapping
capabilities of RapidIO bridging devices. The new interface is intended to
enable data transfers between RapidIO devices in combination with DMA engine
support.
This patch is based on patch submitted by Li Yang <[email protected]>
(https://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/071210.html)
Signed-off-by: Alexandre Bounine <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: Li Yang <[email protected]>
Cc: Kumar Gala <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Convert a nonnegative error return code to a negative one, as returned
elsewhere in the function.
A simplified version of the semantic match that finds this problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
(
if@p1 (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret@p1 = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Peter Senna Tschudin <[email protected]>
Acked-by: Alexandre Bounine <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Signed-off-by: Alexandre Bounine <[email protected]>
Reported-by: Robert P. J. Day <[email protected]>
Cc: Robert P. J. Day <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Modify RapidIO mport device name assignment to include device name of PCIe
side of Tsi721 bridge. The new name format is intended to provide
definitive reference between RapidIO and PCIe sides of the bridge in
systems with multiple Tsi721 bridges.
Signed-off-by: Alexandre Bounine <[email protected]>
Cc: Matt Porter <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Fix multicast packet transmit logic to account for repetitive transmission
of single skb:
- correct check for available buffers (this bug may produce NULL pointer
crash dump in case of heavy traffic);
- update skb user count (incorrect user counter causes a warning dump from
net_tx_action routine during multicast transfers in systems with three or
more rionet participants).
Signed-off-by: Alexandre Bounine <[email protected]>
Cc: Matt Porter <[email protected]>
Cc: David S. Miller <[email protected]>
Cc: <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The inclusion of <generated/utsrelease.h> is unnecessary.
Signed-off-by: Wei Yongjun <[email protected]>
Reviewed-by: Simon Horman <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This cleanup also fixes the following sparse warning:
fs/proc/root.c:64:45: warning: Using plain integer as NULL pointer
Signed-off-by: Sachin Kamat <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The use of if (!head) BUG(); can be replaced with the single line
BUG_ON(!head).
Signed-off-by: Prasad Joshi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Part of the memory will be written twice after this change, but that
should be negligible.
[[email protected]: fix __proc_create() coding-style issues, remove unneeded zero-initialisations]
Signed-off-by: yan <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
proc_get_inode() obtains the inode via a call to iget_locked().
iget_locked() calls alloc_inode() which will call proc_alloc_inode() which
clears proc_inode.fd, so there is no need to clear this field in
proc_get_inode().
If iget_locked() instead found the inode via find_inode_fast(), that inode
will not have I_NEW set so this change has no effect.
Signed-off-by: yan <[email protected]>
Cc: Al Viro <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
If proc_get_inode() returns NULL then presumably it encountered memory
exhaustion. proc_lookup_de() should return -ENOMEM in this case, not
-EINVAL.
Signed-off-by: yan <[email protected]>
Cc: Ryan Mallon <[email protected]>
Cc: Cong Wang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This note has the following format:
long count -- how many files are mapped
long page_size -- units for file_ofs
array of [COUNT] elements of
long start
long end
long file_ofs
followed by COUNT filenames in ASCII: "FILE1" NUL "FILE2" NUL...
Signed-off-by: Denys Vlasenko <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Amerigo Wang <[email protected]>
Cc: "Jonathan M. Foote" <[email protected]>
Cc: Roland McGrath <[email protected]>
Cc: Pedro Alves <[email protected]>
Cc: Fengguang Wu <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Existing PRSTATUS note contains only si_signo, si_code, si_errno fields
from the siginfo of the signal which caused core to be dumped.
There are tools which try to analyze crashes for possible security
implications, and they want to use, among other data, si_addr field from
the SIGSEGV.
This patch adds a new elf note, NT_SIGINFO, which contains the complete
siginfo_t of the signal which killed the process.
Signed-off-by: Denys Vlasenko <[email protected]>
Reviewed-by: Oleg Nesterov <[email protected]>
Cc: Amerigo Wang <[email protected]>
Cc: "Jonathan M. Foote" <[email protected]>
Cc: Roland McGrath <[email protected]>
Cc: Pedro Alves <[email protected]>
Cc: Fengguang Wu <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This is a preparatory patch for the introduction of NT_SIGINFO elf note.
Make the location of compat_siginfo_t uniform across eight architectures
which have it. Now it can be pulled in by including asm/compat.h or
linux/compat.h.
Most of the copies are verbatim. compat_uid[32]_t had to be replaced by
__compat_uid[32]_t. compat_uptr_t had to be moved up before
compat_siginfo_t in asm/compat.h on a several architectures (tile already
had it moved up). compat_sigval_t had to be relocated from linux/compat.h
to asm/compat.h.
Signed-off-by: Denys Vlasenko <[email protected]>
Cc: Oleg Nesterov <[email protected]>
Cc: Amerigo Wang <[email protected]>
Cc: "Jonathan M. Foote" <[email protected]>
Cc: Roland McGrath <[email protected]>
Cc: Pedro Alves <[email protected]>
Cc: Fengguang Wu <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This is a preparatory patch for the introduction of NT_SIGINFO elf note.
With this patch we pass "siginfo_t *siginfo" instead of "int signr" to
do_coredump() and put it into coredump_params. It will be used by the
next patch. Most changes are simple s/signr/siginfo->si_signo/.
Signed-off-by: Denys Vlasenko <[email protected]>
Reviewed-by: Oleg Nesterov <[email protected]>
Cc: Amerigo Wang <[email protected]>
Cc: "Jonathan M. Foote" <[email protected]>
Cc: Roland McGrath <[email protected]>
Cc: Pedro Alves <[email protected]>
Cc: Fengguang Wu <[email protected]>
Cc: Stephen Rothwell <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Cosmetic. Change setup_new_exec() and task_dumpable() to use
SUID_DUMPABLE_ENABLED for /bin/grep.
[[email protected]: checkpatch fixes]
Signed-off-by: Oleg Nesterov <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Some coredump handlers want to create a core file in a way compatible with
standard behavior. Standard behavior with fs.suid_dumpable = 2 is to
create core file with uid=gid=0. However, there was no way for coredump
handler to know that the process being dumped was suid'ed.
This patch adds the new %d specifier for format_corename() which simply
reports __get_dumpable(mm->flags), this is compatible with
/proc/sys/fs/suid_dumpable we already have.
Addresses https://bugzilla.redhat.com/show_bug.cgi?id=787135
Developed during a discussion with Denys Vlasenko.
Signed-off-by: Oleg Nesterov <[email protected]>
Cc: Denys Vlasenko <[email protected]>
Cc: Alex Kelly <[email protected]>
Cc: Andi Kleen <[email protected]>
Cc: Cong Wang <[email protected]>
Cc: Jiri Moskovcak <[email protected]>
Acked-by: Neil Horman <[email protected]>
Cc: Alan Cox <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Create a new header file, fs/coredump.h, which contains functions only
used by the new coredump.c. It also moves do_coredump to the
include/linux/coredump.h header file, for consistency.
Signed-off-by: Alex Kelly <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
Acked-by: Serge Hallyn <[email protected]>
Acked-by: Kees Cook <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Adds an expert Kconfig option, CONFIG_COREDUMP, which allows disabling of
core dump. This saves approximately 2.6k in the compiled kernel, and
complements CONFIG_ELF_CORE, which now depends on it.
CONFIG_COREDUMP also disables coredump-related sysctls, except for
suid_dumpable and related functions, which are necessary for ptrace.
[[email protected]: fix binfmt_aout.c build]
Signed-off-by: Alex Kelly <[email protected]>
Reviewed-by: Josh Triplett <[email protected]>
Acked-by: Serge Hallyn <[email protected]>
Acked-by: Kees Cook <[email protected]>
Cc: Randy Dunlap <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This patch replaces the "whitelist" usage in the code and comments and replace
them by exception list related information.
Signed-off-by: Aristeu Rozanski <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Li Zefan <[email protected]>
Cc: James Morris <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Acked-by: Serge E. Hallyn <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The original model of device_cgroup is having a whitelist where all the
allowed devices are listed. The problem with this approach is that is
impossible to have the case of allowing everything but few devices.
The reason for that lies in the way the whitelist is handled internally:
since there's only a whitelist, the "all devices" entry would have to be
removed and replaced by the entire list of possible devices but the ones
that are being denied. Since dev_t is 32 bits long, representing the allowed
devices as a bitfield is not memory efficient.
This patch replaces the "whitelist" by a "exceptions" list and the default
policy is kept as "deny_all" variable in dev_cgroup structure.
The current interface determines that whenever "a" is written to devices.allow
or devices.deny, the entry masking all devices will be added or removed,
respectively. This behavior is kept and it's what will determine the default
policy:
# cat devices.list
a *:* rwm
# echo a >devices.deny
# cat devices.list
# echo a >devices.allow
# cat devices.list
a *:* rwm
The interface is also preserved. For example, if one wants to block only access
to /dev/null:
# ls -l /dev/null
crw-rw-rw- 1 root root 1, 3 Jul 24 16:17 /dev/null
# echo a >devices.allow
# echo "c 1:3 rwm" >devices.deny
# cat /dev/null
cat: /dev/null: Operation not permitted
# echo >/dev/null
bash: /dev/null: Operation not permitted
mknod /tmp/null c 1 3
mknod: `/tmp/null': Operation not permitted
# echo "c 1:3 r" >devices.allow
# cat /dev/null
# echo >/dev/null
bash: /dev/null: Operation not permitted
mknod /tmp/null c 1 3
mknod: `/tmp/null': Operation not permitted
# echo "c 1:3 rw" >devices.allow
# echo >/dev/null
# cat /dev/null
# mknod /tmp/null c 1 3
mknod: `/tmp/null': Operation not permitted
# echo "c 1:3 rwm" >devices.allow
# echo >/dev/null
# cat /dev/null
# mknod /tmp/null c 1 3
#
Note that I didn't rename the functions/variables in this patch, but in the
next one to make reviewing easier.
Signed-off-by: Aristeu Rozanski <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Li Zefan <[email protected]>
Cc: James Morris <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Acked-by: Serge E. Hallyn <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This function cleans all the items in a whitelist and will be used by the next
patches.
Signed-off-by: Aristeu Rozanski <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Li Zefan <[email protected]>
Cc: James Morris <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Acked-by: Serge E. Hallyn <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
deny_all will determine if the default policy is to deny all device access
unless for the ones in the exception list.
This variable will be used in the next patches to convert device_cgroup
internally into a default policy + rules.
Signed-off-by: Aristeu Rozanski <[email protected]>
Cc: Tejun Heo <[email protected]>
Cc: Li Zefan <[email protected]>
Cc: James Morris <[email protected]>
Cc: Pavel Emelyanov <[email protected]>
Acked-by: Serge E. Hallyn <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
A section with the name "Example" (case-insensitive) has a special meaning
to kernel-doc. These sections are output using mono-type fonts. However,
leading whitespace is stripped, thus robbing a lot of meaning from this,
as indented code examples will be mangled.
This patch preserves the leading whitespace for "Example" sections. More
accurately, it preserves it for all sections, but removes it later if the
section isn't an "Example" section.
Signed-off-by: Daniel Santos <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Michal Marek <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
If you have a section named "Example" that contains an empty line,
attempting to generate htmldocs give you the error:
/path/Documentation/DocBook/kernel-api.xml:3455: parser error : Opening and ending tag mismatch: programlisting line 3449 and para
</para><para>
^
/path/Documentation/DocBook/kernel-api.xml:3473: parser error : Opening and ending tag mismatch: para line 3467 and programlisting
</programlisting></informalexample>
^
/path/Documentation/DocBook/kernel-api.xml:3678: parser error : Opening and ending tag mismatch: programlisting line 3672 and para
</para><para>
^
/path/Documentation/DocBook/kernel-api.xml:3701: parser error : Opening and ending tag mismatch: para line 3690 and programlisting
</programlisting></informalexample>
^
unable to parse
/path/Documentation/DocBook/kernel-api.xml
Essentially, the script attempts to close a <programlisting> with a
closing tag for a <para> block. This patch corrects the problem by
simply not outputting anything extra when we're dumping pre-formatted
text, since the empty line will be rendered correctly anyway.
Signed-off-by: Daniel Santos <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Michal Marek <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Prior to this patch the following code breaks:
/**
* multiline_example - this breaks kernel-doc
*/
#define multiline_example( \
myparam)
Producing this error:
Error(somefile.h:983): cannot understand prototype: 'multiline_example( \ '
This patch fixes the issue by appending all lines ending in a blackslash
(optionally followed by whitespace), removing the backslash and any
whitespace after it prior to appending (just like the C pre-processor
would).
This fixes a break in kerel-doc introduced by the additions to rbtree.h.
Signed-off-by: Daniel Santos <[email protected]>
Cc: Randy Dunlap <[email protected]>
Cc: Michal Marek <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
[[email protected]: checkpatch fixes]
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Amit Sahrawat <[email protected]>
Acked-by: OGAWA Hirofumi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
#define FAT_ENT_EOF(EOF_FAT32)
there is no need to reset value of 'new' for FAT32 as the values is
already correct
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Amit Sahrawat <[email protected]>
Acked-by: OGAWA Hirofumi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
1: Stop any lines going over 80 characters
2: Remove a blank line before EXPORT_SYMBOL_GPL
Signed-off-by: Cruz Julian Bishop <[email protected]>
Acked-by: OGAWA Hirofumi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
1: Import linux/uaccess.h instead of asm.uaccess.h
2: Stop any lines going over 80 characters
3: Stopped setting any variables in if statements
4: Stopped splitting quoted strings
5: Removed unneeded parentheses
Signed-off-by: Cruz Julian Bishop <[email protected]>
Acked-by: OGAWA Hirofumi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Simply remove the spacing between function definitions and
EXPORT_SYMBOL_GPL calls, which were previously generating warnings.
Signed-off-by: Cruz Julian Bishop <[email protected]>
Acked-by: OGAWA Hirofumi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
This does the following:
1: Splits the arguments of a function call to stop it
from exceeding 80 characters
2: Re-indents the arguments of another function call
to prevent the splitting of a quoted string.
Signed-off-by: Cruz Julian Bishop <[email protected]>
Acked-by: OGAWA Hirofumi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
The comments were not lined up properly, so I just re-indented them.
This also fixes a stupid checkpatch issue unknowingly
Signed-off-by: Cruz Julian Bishop <[email protected]>
Acked-by: OGAWA Hirofumi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Mainly fix spacing issues such as "foo * bar" and "foo= bar"
Signed-off-by: Cruz Julian Bishop <[email protected]>
Acked-by: OGAWA Hirofumi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add a space before an equals sign/operator in line 410.
Signed-off-by: Cruz Julian Bishop <[email protected]>
Acked-by: OGAWA Hirofumi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Maintain an index of directory inodes by starting cluster, so that
fat_get_parent() can return the proper cached inode rather than inventing
one that cannot be traced back to the filesystem root.
Add a new msdos/vfat binary mount option "nfs" so that FAT filesystems
that are _not_ exported via NFS are not saddled with maintenance of an
index they will never use.
Finally, simplify NFS file handle generation and lookups. An
ext2-congruent implementation is adequate for FAT needs.
Signed-off-by: Steven J. Magnani <[email protected]>
Acked-by: OGAWA Hirofumi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Under memory pressure, the system may evict dentries from cache. When the
FAT driver receives a NFS request involving an evicted dentry, it is
unable to reconnect it to the filesystem root. This causes the request to
fail, often with ENOENT.
This is partially due to ineffectiveness of the current FAT NFS
implementation, and partially due to an unimplemented fh_to_parent method.
The latter can cause file accesses to fail on shares exported with
subtree_check.
This patch set provides the FAT driver with the ability to
reconnect dentries. NFS file handle generation and lookups are simplified
and made congruent with ext2.
Testing has involved a memory-starved virtual machine running 3.5-rc5 that
exports a ~2 GB vfat filesystem containing a kernel tree (~770 MB, ~40000
files, 9 levels). Both 'cp -r' and 'ls -lR' operations were performed
from a client, some overlapping, some consecutive. Exports with
'subtree_check' and 'no_subtree_check' have been tested.
Note that while this patch set improves FAT's NFS support, it does not
eliminate ESTALE errors completely.
The following should be considered for NFS clients who are sensitive to ESTALE:
* Mounting with lookupcache=none
Unfortunately this can degrade performance severely, particularly for deep
filesystems.
* Incorporating VFS patches to retry ESTALE failures on the client-side,
such as https://lkml.org/lkml/2012/6/29/381
* Handling ESTALE errors in client application code
This patch:
Move NFS-related code into its own C file. No functional changes.
Signed-off-by: Steven J. Magnani <[email protected]>
Acked-by: OGAWA Hirofumi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Use accessor function for msdos_dir_entry 'start'
Signed-off-by: Namjae Jeon <[email protected]>
Signed-off-by: Amit Sahrawat <[email protected]>
Acked-by: OGAWA Hirofumi <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Convert cpu_to_leXX(leXX_to_cpu(E1) + E2) to use leXX_add_cpu().
dpatch engine is used to auto generate this patch.
(https://github.com/weiyj/dpatch)
Signed-off-by: Wei Yongjun <[email protected]>
Cc: Mikulas Patocka <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add basic get/set alarm support for the Seiko Instruments S-35390A. The
chip is used on the QNAP TS-219P+ NAS device.
Signed-off-by: Michael Langer <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Commit c3b79770e51a ("rtc: m41t80: Workaround broken alarm
functionality") disabled m41t80's alarm functions. But since those
functions were not touched, building this driver triggers these GCC
warnings:
drivers/rtc/rtc-m41t80.c:216:12: warning: 'm41t80_rtc_alarm_irq_enable' defined but not used [-Wunused-function]
drivers/rtc/rtc-m41t80.c:238:12: warning: 'm41t80_rtc_set_alarm' defined but not used [-Wunused-function]
drivers/rtc/rtc-m41t80.c:308:12: warning: 'm41t80_rtc_read_alarm' defined but not used [-Wunused-function]
Remove these functions (and the commented out references to them) to
silence these warnings. Anyone wanting to fix the alarm irq functionality
can easily find the removed code in the git log of this file or through
some web searches.
Signed-off-by: Paul Bolle <[email protected]>
Cc: John Stultz <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
As RTC driver needs only irq number from platform data, using
platform_get_irq(), instead of generic dev_get_platdata().
Signed-off-by: Venu Byravarasu <[email protected]>
Acked-by: Stephen Warren <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Signed-off-by: Ulf Hansson <[email protected]>
Acked-by: Linus Walleij <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Convert the struct i2c_msg initialization to C99 format. This makes
maintaining and editing the code simpler. Also helps once other fields
like transferred are added in future.
Signed-off-by: Shubhrajyoti D <[email protected]>
Reviewed-by: Felipe Balbi <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Convert the struct i2c_msg initialization to C99 format. This makes
maintaining and editing the code simpler. Also helps once other fields
like transferred are added in future.
Signed-off-by: Shubhrajyoti D <[email protected]>
Reviewed-by: Felipe Balbi <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Convert the struct i2c_msg initialization to C99 format. This makes
maintaining and editing the code simpler. Also helps once other fields
like transferred are added in future.
Signed-off-by: Shubhrajyoti D <[email protected]>
Reviewed-by: Felipe Balbi <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Convert the struct i2c_msg initialization to C99 format. This makes
maintaining and editing the code simpler. Also helps once other fields
like transferred are added in future. while at it also fix a checkpatch
warn WARNING: sizeof rs5c->buf should be sizeof(rs5c->buf)
Signed-off-by: Shubhrajyoti D <[email protected]>
Reviewed-by: Felipe Balbi <[email protected]>
Cc: Alessandro Zummo <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|