aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2018-03-21drm/i915: Specify which engines to reset following semaphore/event lockupsChris Wilson1-2/+2
If the GPU is stuck waiting for an event or for a semaphore, we need to reset the GPU in order to recover. We have to tell the reset routine which engines we want reset, but we were still using the old interface and declaring it as "not-fatal". Fixes: 14b730fcb8d9 ("drm/i915/tdr: Prepare error handler to accept mask of hung engines") Signed-off-by: Chris Wilson <[email protected]> Cc: Mika Kuoppala <[email protected]> Cc: Michel Thierry <[email protected]> Reviewed-by: Michel Thierry <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/[email protected] (cherry picked from commit ca98317b89428e6ac17be0938b467ed78654dd56) Signed-off-by: Rodrigo Vivi <[email protected]>
2018-03-21ath9k_htc: use non-QoS NDP for AP probingJohannes Berg1-0/+1
When switching mac80211 to use QoS NDP, it turned out that ath9k_htc is somehow broken by this, e.g. see https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=891060. Fix this by using the new mac80211 flag to go back to the old, incorrect, behaviour for this driver. Fixes: 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing") Reported-by: Ben Caradoc-Davies <[email protected]> Acked-by: Kalle Valo <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-03-21mac80211_hwsim: Set wmediumd for new radiosAndrew Zaborowski1-0/+1
Set the wmediumd to the net's wmediumd when the radio gets created. Radios created after HWSIM_CMD_REGISTER don't currently get their data->wmediumd set and the userspace would need to reconnect to netlink to be able to call HWSIM_CMD_REGISTER again. Alternatively I think data->netgroup and data->wmedium could be replaced with a pointer to hwsim_net. Signed-off-by: Andrew Zaborowski <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-03-21mmc: sdhci-acpi: Fix IRQ 0Adrian Hunter1-1/+1
Zero is a valid IRQ number and is being used on some CHT tablets. Stop treating it as an error. Reported-by: Luke Ross <[email protected]> Fixes: 1b7ba57ecc86 ("mmc: sdhci-acpi: Handle return value of platform_get_irq") Cc: Arvind Yadav <[email protected]> Signed-off-by: Adrian Hunter <[email protected]> Cc: [email protected] Signed-off-by: Ulf Hansson <[email protected]>
2018-03-21mac80211: add ieee80211_hw flag for QoS NDP supportBen Caradoc-Davies3-1/+7
Commit 7b6ddeaf27ec ("mac80211: use QoS NDP for AP probing") added an argument qos_ok to ieee80211_nullfunc_get to support QoS NDP. Despite the claim in the commit log "Change all the drivers to *not* allow QoS NDP for now, even though it looks like most of them should be OK with that", this commit enables QoS NDP in response to beacons (see change to mlme.c:ieee80211_send_nullfunc), causing ath9k_htc to lose IP connectivity. See: https://patchwork.kernel.org/patch/10241109/ https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=891060 Introduce a hardware flag to allow such buggy drivers to override the correct default behaviour of mac80211 of sending QoS NDP packets. Signed-off-by: Ben Caradoc-Davies <[email protected]> Signed-off-by: Johannes Berg <[email protected]>
2018-03-21drm/vmwgfx: Fix a destoy-while-held mutex problem.Thomas Hellstrom4-16/+34
When validating legacy surfaces, the backup bo might be destroyed at surface validate time. However, the kms resource validation code may have the bo reserved, so we will destroy a locked mutex. While there shouldn't be any other users of that mutex when it is destroyed, it causes a lock leak and thus throws a lockdep error. Fix this by having the kms resource validation code hold a reference to the bo while we have it reserved. We do this by introducing a validation context which might come in handy when the kms code is extended to validate multiple resources or buffers. Cc: <[email protected]> Signed-off-by: Thomas Hellstrom <[email protected]> Reviewed-by: Brian Paul <[email protected]> Reviewed-by: Sinclair Yeh <[email protected]>
2018-03-21drm/vmwgfx: Fix black screen and device errors when running without fbdevThomas Hellstrom4-1/+25
When we are running without fbdev, transitioning from the login screen to X or gnome-shell/wayland will cause a vt switch and the driver will disable svga mode, losing all modesetting resources. However, the kms atomic state does not reflect that and may think that a crtc is still turned on, which will cause device errors when we try to bind an fb to the crtc, and the screen will remain black. Fix this by turning off all kms resources before disabling svga mode. Cc: <[email protected]> Signed-off-by: Thomas Hellstrom <[email protected]> Reviewed-by: Sinclair Yeh <[email protected]>
2018-03-21drm: Reject getfb for multi-plane framebuffersDaniel Stone1-0/+7
getfb can only return a single plane, so reject attempts to use it with multi-plane framebuffers. Signed-off-by: Daniel Stone <[email protected]> Reported-by: Daniel van Vugt <[email protected]> Reviewed-by: Rob Clark <[email protected]> Reviewed-by: Daniel Vetter <[email protected]> Fixes: 308e5bcbdb10 ("drm: add an fb creation ioctl that takes a pixel format v5") Cc: [email protected] # v3.3+ Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105518 Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
2018-03-21ALSA: hda - Force polling mode on CFL for fixing codec communicationTakashi Iwai1-0/+5
We've observed too long probe time with Coffee Lake (CFL) machines, and the likely cause is some communication problem between the HD-audio controller and the codec chips. While the controller expects an IRQ wakeup for each codec response, it seems sometimes missing, and it takes one second for the controller driver to time out and read the response in the polling mode. Although we aren't sure about the real culprit yet, in this patch, we put a workaround by forcing the polling mode as default for CFL machines; the polling mode itself isn't too heavy, and much better than other workarounds initially suggested (e.g. disabling power-save), at least. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=199007 Fixes: e79b0006c45c ("ALSA: hda - Add Coffelake PCI ID") Reported-and-tested-by: Hui Wang <[email protected]> Cc: <[email protected]> Signed-off-by: Takashi Iwai <[email protected]>
2018-03-21mtd: nand: fsl_ifc: Read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0Jagdish Gediya2-10/+2
Due to missing information in Hardware manual, current implementation doesn't read ECCSTAT0 and ECCSTAT1 registers for IFC 2.0. Add support to read ECCSTAT0 and ECCSTAT1 registers during ecccheck for IFC 2.0. Fixes: 656441478ed5 ("mtd: nand: ifc: Fix location of eccstat registers for IFC V1.0") Cc: [email protected] # v3.18+ Signed-off-by: Jagdish Gediya <[email protected]> Reviewed-by: Prabhakar Kushwaha <[email protected]> Signed-off-by: Boris Brezillon <[email protected]>
2018-03-21mtd: nand: fsl_ifc: Fix eccstat array overflow for IFC ver >= 2.0.0Jagdish Gediya1-13/+10
Number of ECC status registers i.e. (ECCSTATx) has been increased in IFC version 2.0.0 due to increase in SRAM size. This is causing eccstat array to over flow. So, replace eccstat array with u32 variable to make it fail-safe and independent of number of ECC status registers or SRAM size. Fixes: bccb06c353af ("mtd: nand: ifc: update bufnum mask for ver >= 2.0.0") Cc: [email protected] # 3.18+ Signed-off-by: Prabhakar Kushwaha <[email protected]> Signed-off-by: Jagdish Gediya <[email protected]> Signed-off-by: Boris Brezillon <[email protected]>
2018-03-21mtd: nand: fsl_ifc: Fix nand waitfunc return valueJagdish Gediya1-2/+3
As per the IFC hardware manual, Most significant 2 bytes in nand_fsr register are the outcome of NAND READ STATUS command. So status value need to be shifted and aligned as per the nand framework requirement. Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller") Cc: [email protected] # v3.18+ Signed-off-by: Jagdish Gediya <[email protected]> Reviewed-by: Prabhakar Kushwaha <[email protected]> Signed-off-by: Boris Brezillon <[email protected]>
2018-03-21drm/amd/display: Add one to EDID's audio channel count when passing to DCHarry Wentland1-1/+1
DC takes channel count to mean the actual count. cea_sad's channels represent it as number of channels - 1. Signed-off-by: Harry Wentland <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-03-21drm/amd/display: We shouldn't set format_default on plane as atomic driverHarry Wentland1-2/+0
This is still a leftover from early atomic brinup days. Signed-off-by: Harry Wentland <[email protected]> Reviewed-by: Tony Cheng <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2018-03-21drm/amd/display: Fix FMT truncation programmingMikita Lipski1-2/+2
Switch the order of parameters being set for depth and mode of truncation, as it previously was not correct Signed-off-by: Mikita Lipski <[email protected]> Reviewed-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-21drm/amd/display: Allow truncation to 10 bitsMikita Lipski1-3/+2
The truncation isn't being programmed if the truncation depth is set to 2, it causes an issue with dce11.2 asic using 6bit eDP panel. It required to truncate 12:10 in order to perform spatial dither 10:6. This change will allow 12:10 truncation to be enabled. Signed-off-by: Mikita Lipski <[email protected]> Reviewed-by: Jun Lei <[email protected]> Acked-by: Harry Wentland <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2018-03-21Merge tag 'exynos-drm-fixes-for-v4.16-rc6' of ↵Dave Airlie1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos into drm-fixes Add a device tree property description for hdmi device node . '#sound-dai-cells' property is required to describe link between the HDMI IP block and the SoC's audio subsystem and Exynos SoC device tree files already have this property but we missed its description. * tag 'exynos-drm-fixes-for-v4.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/daeinki/drm-exynos: dt-bindings: exynos: Document #sound-dai-cells property of the HDMI node
2018-03-21Merge tag 'drm/tegra/for-4.16-rc7-fixes' of ↵Dave Airlie4-7/+20
git://anongit.freedesktop.org/tegra/linux into drm-fixes drm/tegra: Fixes for v4.16-rc7 This contains two small fixes for the alpha blending support that was merged into v4.16-rc1 and a fix for connector reference leaks caused by the fact that display pipelines are no longer automatically disabled if the framebuffer is removed. Furthermore this contains a fix for a crash on IOMMU detach at driver unbind time and a regulator enable/disable unbalance fix. * tag 'drm/tegra/for-4.16-rc7-fixes' of git://anongit.freedesktop.org/tegra/linux: drm/tegra: Shutdown on driver unbind drm/tegra: dsi: Don't disable regulator on ->exit() drm/tegra: dc: Detach IOMMU group from domain only once drm/tegra: plane: Correct legacy blending drm/tegra: plane: Fix RGB565 format on older Tegra
2018-03-20Merge tag 'clk-fixes-for-linus' of ↵Linus Torvalds10-44/+81
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk fixes from Stephen Boyd: "A late collection of fixes for regressions seen this release cycle. Normally I send this earlier than now but real life got in the way. Things are back to normal now. There's the normal set of SoC driver fixes: i.MX boot warning, TI display clks, allwinner clk ops being wrong (fun), driver probe badness on error paths, correctness fix for the new aspeed driver, and even a fix for a race condition in the bcm2835 clk driver. At the core framework level we also got some fixes for the clk phase API caching at the wrong time, better handling of the enabled state of orphan clks, and a fix for a newly introduced bug in how we handle rate calculations for pass-through clks" * tag 'clk-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: clk: bcm2835: Protect sections updating shared registers clk: bcm2835: Fix ana->maskX definitions clk: aspeed: Prevent reset if clock is enabled clk: aspeed: Fix is_enabled for certain clocks clk: qcom: msm8916: Fix return value check in qcom_apcs_msm8916_clk_probe() clk: hisilicon: hi3660：Fix potential NULL dereference in hi3660_stub_clk_probe() clk: fix determine rate error with pass-through clock clk: migrate the count of orphaned clocks at init clk: update cached phase to respect the fact when setting phase clk: ti: am43xx: add set-rate-parent support for display clkctrl clock clk: ti: am33xx: add set-rate-parent support for display clkctrl clock clk: ti: clkctrl: add support for CLK_SET_RATE_PARENT flag clk: imx51-imx53: Fix UART4/5 registration on i.MX50 and i.MX53 clk: sunxi-ng: a31: Fix CLK_OUT_* clock ops
2018-03-20kbuild: disable clang's default use of -fmerge-all-constantsDaniel Borkmann1-0/+9
Prasad reported that he has seen crashes in BPF subsystem with netd on Android with arm64 in the form of (note, the taint is unrelated): [ 4134.721483] Unable to handle kernel paging request at virtual address 800000001 [ 4134.820925] Mem abort info: [ 4134.901283] Exception class = DABT (current EL), IL = 32 bits [ 4135.016736] SET = 0, FnV = 0 [ 4135.119820] EA = 0, S1PTW = 0 [ 4135.201431] Data abort info: [ 4135.301388] ISV = 0, ISS = 0x00000021 [ 4135.359599] CM = 0, WnR = 0 [ 4135.470873] user pgtable: 4k pages, 39-bit VAs, pgd = ffffffe39b946000 [ 4135.499757] [0000000800000001] *pgd=0000000000000000, *pud=0000000000000000 [ 4135.660725] Internal error: Oops: 96000021 [#1] PREEMPT SMP [ 4135.674610] Modules linked in: [ 4135.682883] CPU: 5 PID: 1260 Comm: netd Tainted: G S W 4.14.19+ #1 [ 4135.716188] task: ffffffe39f4aa380 task.stack: ffffff801d4e0000 [ 4135.731599] PC is at bpf_prog_add+0x20/0x68 [ 4135.741746] LR is at bpf_prog_inc+0x20/0x2c [ 4135.751788] pc : [<ffffff94ab7ad584>] lr : [<ffffff94ab7ad638>] pstate: 60400145 [ 4135.769062] sp : ffffff801d4e3ce0 [...] [ 4136.258315] Process netd (pid: 1260, stack limit = 0xffffff801d4e0000) [ 4136.273746] Call trace: [...] [ 4136.442494] 3ca0: ffffff94ab7ad584 0000000060400145 ffffffe3a01bf8f8 0000000000000006 [ 4136.460936] 3cc0: 0000008000000000 ffffff94ab844204 ffffff801d4e3cf0 ffffff94ab7ad584 [ 4136.479241] [<ffffff94ab7ad584>] bpf_prog_add+0x20/0x68 [ 4136.491767] [<ffffff94ab7ad638>] bpf_prog_inc+0x20/0x2c [ 4136.504536] [<ffffff94ab7b5d08>] bpf_obj_get_user+0x204/0x22c [ 4136.518746] [<ffffff94ab7ade68>] SyS_bpf+0x5a8/0x1a88 Android's netd was basically pinning the uid cookie BPF map in BPF fs (/sys/fs/bpf/traffic_cookie_uid_map) and later on retrieving it again resulting in above panic. Issue is that the map was wrongly identified as a prog! Above kernel was compiled with clang 4.0, and it turns out that clang decided to merge the bpf_prog_iops and bpf_map_iops into a single memory location, such that the two i_ops could then not be distinguished anymore. Reason for this miscompilation is that clang has the more aggressive -fmerge-all-constants enabled by default. In fact, clang source code has a comment about it in lib/AST/ExprConstant.cpp on why it is okay to do so: Pointers with different bases cannot represent the same object. (Note that clang defaults to -fmerge-all-constants, which can lead to inconsistent results for comparisons involving the address of a constant; this generally doesn't matter in practice.) The issue never appeared with gcc however, since gcc does not enable -fmerge-all-constants by default and even *explicitly* states in it's option description that using this flag results in non-conforming behavior, quote from man gcc: Languages like C or C++ require each variable, including multiple instances of the same variable in recursive calls, to have distinct locations, so using this option results in non-conforming behavior. There are also various clang bug reports open on that matter [1], where clang developers acknowledge the non-conforming behavior, and refer to disabling it with -fno-merge-all-constants. But even if this gets fixed in clang today, there are already users out there that triggered this. Thus, fix this issue by explicitly adding -fno-merge-all-constants to the kernel's Makefile to generically disable this optimization, since potentially other places in the kernel could subtly break as well. Note, there is also a flag called -fmerge-constants (not supported by clang), which is more conservative and only applies to strings and it's enabled in gcc's -O/-O2/-O3/-Os optimization levels. In gcc's code, the two flags -fmerge-{all-,}constants share the same variable internally, so when disabling it via -fno-merge-all-constants, then we really don't merge any const data (e.g. strings), and text size increases with gcc (14,927,214 -> 14,942,646 for vmlinux.o). $ gcc -fverbose-asm -O2 foo.c -S -o foo.S -> foo.S lists -fmerge-constants under options enabled $ gcc -fverbose-asm -O2 -fno-merge-all-constants foo.c -S -o foo.S -> foo.S doesn't list -fmerge-constants under options enabled $ gcc -fverbose-asm -O2 -fno-merge-all-constants -fmerge-constants foo.c -S -o foo.S -> foo.S lists -fmerge-constants under options enabled Thus, as a workaround we need to set both -fno-merge-all-constants *and* -fmerge-constants in the Makefile in order for text size to stay as is. [1] https://bugs.llvm.org/show_bug.cgi?id=18538 Reported-by: Prasad Sodagudi <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Chenbo Feng <[email protected]> Cc: Richard Smith <[email protected]> Cc: Chandler Carruth <[email protected]> Cc: [email protected] Tested-by: Prasad Sodagudi <[email protected]> Acked-by: Alexei Starovoitov <[email protected]> Signed-off-by: Alexei Starovoitov <[email protected]>
2018-03-20Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdmaLinus Torvalds12-53/+90
Pull rdma fixes from Jason Gunthorpe: "Not much exciting here, almost entirely syzkaller fixes. This is going to be on ongoing theme for some time, I think. Both Google and Mellanox are now running syzkaller on different parts of the user API. Summary: - Many bug fixes related to syzkaller from Leon Romanovsky. These are still for the mlx driver and ucma interface. - Fix a situation with port reuse for iWarp, discovered during scale-up testing - Bug fixes for the profile and restrack patches accepted during this merge window - Compile warning cleanups from Arnd, this is apparently the last warning to make 32 bit builds quiet" * tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: RDMA/ucma: Ensure that CM_ID exists prior to access it RDMA/verbs: Remove restrack entry from XRCD structure RDMA/ucma: Fix use-after-free access in ucma_close RDMA/ucma: Check AF family prior resolving address infiniband: bnxt_re: use BIT_ULL() for 64-bit bit masks infiniband: qplib_fp: fix pointer cast IB/mlx5: Fix cleanup order on unload RDMA/ucma: Don't allow join attempts for unsupported AF family RDMA/ucma: Fix access to non-initialized CM_ID object RDMA/core: Do not use invalid destination in determining port reuse RDMA/mlx5: Fix crash while accessing garbage pointer and freed memory IB/mlx5: Fix integer overflows in mlx5_ib_create_srq IB/mlx5: Fix out-of-bounds read in create_raw_packet_qp_rq
2018-03-20Merge tag 'scsi-fixes' of ↵Linus Torvalds2-21/+13
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI fixes from James Bottomley: - one driver patch (qla2xxx) which fixes a problem caused by an existing regression fix (FCP discovery is failing) - one generic fix to a longstanding bug in libsas that causes I/O eventually to hang to the device in the face of ATA error recovery. * tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: scsi: qla2xxx: Remove FC_NO_LOOP_ID for FCP and FC-NVMe Discovery scsi: libsas: defer ata device eh commands to libata
2018-03-20Merge tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linuxLinus Torvalds1-19/+43
Pull nfsd fix from Bruce Fields: "Just one fix for an occasional panic from Jeff Layton" * tag 'nfsd-4.16-1' of git://linux-nfs.org/~bfields/linux: nfsd: remove blocked locks on client teardown
2018-03-20bpf: skip unnecessary capability checkChenbo Feng1-1/+1
The current check statement in BPF syscall will do a capability check for CAP_SYS_ADMIN before checking sysctl_unprivileged_bpf_disabled. This code path will trigger unnecessary security hooks on capability checking and cause false alarms on unprivileged process trying to get CAP_SYS_ADMIN access. This can be resolved by simply switch the order of the statement and CAP_SYS_ADMIN is not required anyway if unprivileged bpf syscall is allowed. Signed-off-by: Chenbo Feng <[email protected]> Acked-by: Lorenzo Colitti <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-03-20trace/bpf: remove helper bpf_perf_prog_read_value from tracepoint type programsYonghong Song1-28/+40
Commit 4bebdc7a85aa ("bpf: add helper bpf_perf_prog_read_value") added helper bpf_perf_prog_read_value so that perf_event type program can read event counter and enabled/running time. This commit, however, introduced a bug which allows this helper for tracepoint type programs. This is incorrect as bpf_perf_prog_read_value needs to access perf_event through its bpf_perf_event_data_kern type context, which is not available for tracepoint type program. This patch fixed the issue by separating bpf_func_proto between tracepoint and perf_event type programs and removed bpf_perf_prog_read_value from tracepoint func prototype. Fixes: 4bebdc7a85aa ("bpf: add helper bpf_perf_prog_read_value") Reported-by: Alexei Starovoitov <[email protected]> Signed-off-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-03-20test_bpf: Fix testing with CONFIG_BPF_JIT_ALWAYS_ON=y on other archesThadeu Lima de Souza Cascardo1-1/+1
Function bpf_fill_maxinsns11 is designed to not be able to be JITed on x86_64. So, it fails when CONFIG_BPF_JIT_ALWAYS_ON=y, and commit 09584b406742 ("bpf: fix selftests/bpf test_kmod.sh failure when CONFIG_BPF_JIT_ALWAYS_ON=y") makes sure that failure is detected on that case. However, it does not fail on other architectures, which have a different JIT compiler design. So, test_bpf has started to fail to load on those. After this fix, test_bpf loads fine on both x86_64 and ppc64el. Fixes: 09584b406742 ("bpf: fix selftests/bpf test_kmod.sh failure when CONFIG_BPF_JIT_ALWAYS_ON=y") Signed-off-by: Thadeu Lima de Souza Cascardo <[email protected]> Reviewed-by: Yonghong Song <[email protected]> Signed-off-by: Daniel Borkmann <[email protected]>
2018-03-20kvm/x86: fix icebp instruction handlingLinus Torvalds2-1/+9
The undocumented 'icebp' instruction (aka 'int1') works pretty much like 'int3' in the absense of in-circuit probing equipment (except, obviously, that it raises #DB instead of raising #BP), and is used by some validation test-suites as such. But Andy Lutomirski noticed that his test suite acted differently in kvm than on bare hardware. The reason is that kvm used an inexact test for the icebp instruction: it just assumed that an all-zero VM exit qualification value meant that the VM exit was due to icebp. That is not unlike the guess that do_debug() does for the actual exception handling case, but it's purely a heuristic, not an absolute rule. do_debug() does it because it wants to ascribe _some_ reasons to the #DB that happened, and an empty %dr6 value means that 'icebp' is the most likely casue and we have no better information. But kvm can just do it right, because unlike the do_debug() case, kvm actually sees the real reason for the #DB in the VM-exit interruption information field. So instead of relying on an inexact heuristic, just use the actual VM exit information that says "it was 'icebp'". Right now the 'icebp' instruction isn't technically documented by Intel, but that will hopefully change. The special "privileged software exception" information _is_ actually mentioned in the Intel SDM, even though the cause of it isn't enumerated. Reported-by: Andy Lutomirski <[email protected]> Tested-by: Paolo Bonzini <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
2018-03-20RDMA/ucma: Ensure that CM_ID exists prior to access itLeon Romanovsky1-6/+9
Prior to access UCMA commands, the context should be initialized and connected to CM_ID with ucma_create_id(). In case user skips this step, he can provide non-valid ctx without CM_ID and cause to multiple NULL dereferences. Also there are situations where the create_id can be raced with other user access, ensure that the context is only shared to other threads once it is fully initialized to avoid the races. [ 109.088108] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [ 109.090315] IP: ucma_connect+0x138/0x1d0 [ 109.092595] PGD 80000001dc02d067 P4D 80000001dc02d067 PUD 1da9ef067 PMD 0 [ 109.095384] Oops: 0000 [#1] SMP KASAN PTI [ 109.097834] CPU: 0 PID: 663 Comm: uclose Tainted: G B 4.16.0-rc1-00062-g2975d5de6428 #45 [ 109.100816] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.11.0-0-g63451fca13-prebuilt.qemu-project.org 04/01/2014 [ 109.105943] RIP: 0010:ucma_connect+0x138/0x1d0 [ 109.108850] RSP: 0018:ffff8801c8567a80 EFLAGS: 00010246 [ 109.111484] RAX: 0000000000000000 RBX: 1ffff100390acf50 RCX: ffffffff9d7812e2 [ 109.114496] RDX: 1ffffffff3f507a5 RSI: 0000000000000297 RDI: 0000000000000297 [ 109.117490] RBP: ffff8801daa15600 R08: 0000000000000000 R09: ffffed00390aceeb [ 109.120429] R10: 0000000000000001 R11: ffffed00390aceea R12: 0000000000000000 [ 109.123318] R13: 0000000000000120 R14: ffff8801de6459c0 R15: 0000000000000118 [ 109.126221] FS: 00007fabb68d6700(0000) GS:ffff8801e5c00000(0000) knlGS:0000000000000000 [ 109.129468] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 109.132523] CR2: 0000000000000020 CR3: 00000001d45d8003 CR4: 00000000003606b0 [ 109.135573] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 109.138716] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 109.142057] Call Trace: [ 109.144160] ? ucma_listen+0x110/0x110 [ 109.146386] ? wake_up_q+0x59/0x90 [ 109.148853] ? futex_wake+0x10b/0x2a0 [ 109.151297] ? save_stack+0x89/0xb0 [ 109.153489] ? _copy_from_user+0x5e/0x90 [ 109.155500] ucma_write+0x174/0x1f0 [ 109.157933] ? ucma_resolve_route+0xf0/0xf0 [ 109.160389] ? __mod_node_page_state+0x1d/0x80 [ 109.162706] __vfs_write+0xc4/0x350 [ 109.164911] ? kernel_read+0xa0/0xa0 [ 109.167121] ? path_openat+0x1b10/0x1b10 [ 109.169355] ? fsnotify+0x899/0x8f0 [ 109.171567] ? fsnotify_unmount_inodes+0x170/0x170 [ 109.174145] ? __fget+0xa8/0xf0 [ 109.177110] vfs_write+0xf7/0x280 [ 109.179532] SyS_write+0xa1/0x120 [ 109.181885] ? SyS_read+0x120/0x120 [ 109.184482] ? compat_start_thread+0x60/0x60 [ 109.187124] ? SyS_read+0x120/0x120 [ 109.189548] do_syscall_64+0xeb/0x250 [ 109.192178] entry_SYSCALL_64_after_hwframe+0x21/0x86 [ 109.194725] RIP: 0033:0x7fabb61ebe99 [ 109.197040] RSP: 002b:00007fabb68d5e98 EFLAGS: 00000202 ORIG_RAX: 0000000000000001 [ 109.200294] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007fabb61ebe99 [ 109.203399] RDX: 0000000000000120 RSI: 00000000200001c0 RDI: 0000000000000004 [ 109.206548] RBP: 00007fabb68d5ec0 R08: 0000000000000000 R09: 0000000000000000 [ 109.209902] R10: 0000000000000000 R11: 0000000000000202 R12: 00007fabb68d5fc0 [ 109.213327] R13: 0000000000000000 R14: 00007fff40ab2430 R15: 00007fabb68d69c0 [ 109.216613] Code: 88 44 24 2c 0f b6 84 24 6e 01 00 00 88 44 24 2d 0f b6 84 24 69 01 00 00 88 44 24 2e 8b 44 24 60 89 44 24 30 e8 da f6 06 ff 31 c0 <66> 41 83 7c 24 20 1b 75 04 8b 44 24 64 48 8d 74 24 20 4c 89 e7 [ 109.223602] RIP: ucma_connect+0x138/0x1d0 RSP: ffff8801c8567a80 [ 109.226256] CR2: 0000000000000020 Fixes: 75216638572f ("RDMA/cma: Export rdma cm interface to userspace") Reported-by: <[email protected]> Signed-off-by: Leon Romanovsky <[email protected]> Signed-off-by: Jason Gunthorpe <[email protected]>
2018-03-20ipv6: old_dport should be a __be16 in __ip6_datagram_connect()Stefano Brivio1-1/+1
Fixes: 2f987a76a977 ("net: ipv6: keep sk status consistent after datagram connect failure") Signed-off-by: Stefano Brivio <[email protected]> Acked-by: Paolo Abeni <[email protected]> Acked-by: Guillaume Nault <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-20Merge tag 'linux-can-fixes-for-4.16-20180319' of ↵David S. Miller1-3/+2
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can Marc Kleine-Budde says: ==================== pull-request: can 2018-03-19 this is a pull reqeust of one patch for net/master. The patch is by Andri Yngvason and fixes a potential use-after-free bug in the cc770 driver introduced in the previous pull-request. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-20net: gemini: fix memory leakIgor Pylypiv1-0/+1
cppcheck report: [drivers/net/ethernet/cortina/gemini.c:543]: (error) Memory leak: skb_tab Signed-off-by: Igor Pylypiv <[email protected]> Acked-by: Linus Walleij <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-20net: ethernet: arc: Fix a potential memory leak if an optional regulator is ↵Christophe JAILLET1-2/+4
deferred If the optional regulator is deferred, we must release some resources. They will be re-allocated when the probe function will be called again. Fixes: 6eacf31139bf ("ethernet: arc: Add support for Rockchip SoC layer device tree bindings") Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-20devlink: Remove redundant free on error pathArkadi Sharshevsky1-12/+4
The current code performs unneeded free. Remove the redundant skb freeing during the error path. Fixes: 1555d204e743 ("devlink: Support for pipeline debug (dpipe)") Signed-off-by: Arkadi Sharshevsky <[email protected]> Acked-by: Jiri Pirko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-20vmxnet3: remove unused flag "rxcsum" from struct vmxnet3_adapterIgor Pylypiv1-2/+0
Signed-off-by: Igor Pylypiv <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-20Merge branch 'for-upstream' of ↵David S. Miller2-5/+10
git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth Johan Hedberg says: ==================== Here are a few more important Bluetooth driver fixes for the 4.16 kernel. Please let me know if there are any issues pulling. Thanks. ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-20drm/sun4i: hdmi: Fix another error handling path in 'sun4i_hdmi_bind()'Christophe JAILLET1-1/+2
If we can not get the HDMI DDC clock, we still need to free some resources before returning. Fixes: 939d749ad664 ("drm/sun4i: hdmi: Add support for controller hardware variants") Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/5e0084af4ad57e9eea3bca5bd8e2e95970cd6714.1521413031.git.christophe.jaillet@wanadoo.fr
2018-03-20drm/sun4i: hdmi: Fix an error handling path in 'sun4i_hdmi_bind()'Christophe JAILLET1-1/+2
If we can not allocate the HDMI encoder regmap, we still need to free some resources before returning. Fixes: 4b1c924b1fc1 ("drm/sun4i: hdmi: create a regmap for later use") Reviewed-by: Chen-Yu Tsai <[email protected]> Signed-off-by: Christophe JAILLET <[email protected]> Signed-off-by: Maxime Ripard <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/14c42391e1b562c7495bda6ad6fa1d24ec8dc052.1521413031.git.christophe.jaillet@wanadoo.fr
2018-03-20sched/debug: Adjust newlines for better alignmentJoe Lawrence1-11/+16
Scheduler debug stats include newlines that display out of alignment when prefixed by timestamps. For example, the dmesg utility: % echo t > /proc/sysrq-trigger % dmesg ... [ 83.124251] runnable tasks: S task PID tree-key switches prio wait-time sum-exec sum-sleep ----------------------------------------------------------------------------------------------------------- At the same time, some syslog utilities (like rsyslog by default) don't like the additional newlines control characters, saving lines like this to /var/log/messages: Mar 16 16:02:29 localhost kernel: #012runnable tasks:#012 S task PID tree-key ... ^^^^ ^^^^ Clean these up by moving newline characters to their own SEQ_printf invocation. This leaves the /proc/sched_debug unchanged, but brings the entire output into alignment when prefixed: % echo t > /proc/sysrq-trigger % dmesg ... [ 62.410368] runnable tasks: [ 62.410368] S task PID tree-key switches prio wait-time sum-exec sum-sleep [ 62.410369] ----------------------------------------------------------------------------------------------------------- [ 62.410369] I kworker/u12:0 5 1932.215593 332 120 0.000000 3.621252 0.000000 0 0 / and no escaped control characters from rsyslog in /var/log/messages: Mar 16 16:15:06 localhost kernel: runnable tasks: Mar 16 16:15:06 localhost kernel: S task PID tree-key ... Signed-off-by: Joe Lawrence <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-03-20sched/debug: Fix per-task line continuation for console outputJoe Lawrence1-1/+1
When the SEQ_printf() macro prints to the console, it runs a simple printk() without KERN_CONT "continued" line printing. The result of this is oddly wrapped task info, for example: % echo t > /proc/sysrq-trigger % dmesg ... runnable tasks: ... [ 29.608611] I [ 29.608613] rcu_sched 8 3252.013846 4087 120 [ 29.608614] 0.000000 29.090111 0.000000 [ 29.608615] 0 0 [ 29.608616] / Modify SEQ_printf to use pr_cont() for expected one-line results: % echo t > /proc/sysrq-trigger % dmesg ... runnable tasks: ... [ 106.716329] S cpuhp/5 37 2006.315026 14 120 0.000000 0.496893 0.000000 0 0 / Signed-off-by: Joe Lawrence <[email protected]> Acked-by: Peter Zijlstra <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-03-20perf/cgroup: Fix child event counting bugSong Liu1-5/+16
When a perf_event is attached to parent cgroup, it should count events for all children cgroups: parent_group <---- perf_event \ - child_group <---- process(es) However, in our tests, we found this perf_event cannot report reliable results. Here is an example case: # create cgroups mkdir -p /sys/fs/cgroup/p/c # start perf for parent group perf stat -e instructions -G "p" # on another console, run test process in child cgroup: stressapptest -s 2 -M 1000 & echo $! > /sys/fs/cgroup/p/c/cgroup.procs # after the test process is done, stop perf in the first console shows <not counted> instructions p The instruction should not be "not counted" as the process runs in the child cgroup. We found this is because perf_event->cgrp and cpuctx->cgrp are not identical, thus perf_event->cgrp are not updated properly. This patch fixes this by updating perf_cgroup properly for ancestor cgroup(s). Reported-by: Ephraim Park <[email protected]> Signed-off-by: Song Liu <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: <[email protected]> Cc: <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-03-20perf/x86/intel/uncore: Fix multi-domain PCI CHA enumeration bug on Skylake ↵Kan Liang1-14/+17
servers The number of CHAs is miscalculated on multi-domain PCI Skylake server systems, resulting in an uncore driver initialization error. Gary Kroening explains: "For systems with a single PCI segment, it is sufficient to look for the bus number to change in order to determine that all of the CHa's have been counted for a single socket. However, for multi PCI segment systems, each socket is given a new segment and the bus number does NOT change. So looking only for the bus number to change ends up counting all of the CHa's on all sockets in the system. This leads to writing CPU MSRs beyond a valid range and causes an error in ivbep_uncore_msr_init_box()." To fix this bug, query the number of CHAs from the CAPID6 register: it should read bits 27:0 in the CAPID6 register located at Device 30, Function 3, Offset 0x9C. These 28 bits form a bit vector of available LLC slices and the CHAs that manage those slices. Reported-by: Kroening, Gary <[email protected]> Tested-by: Kroening, Gary <[email protected]> Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Reviewed-by: Andy Shevchenko <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Cc: [email protected] Fixes: cd34cd97b7b4 ("perf/x86/intel/uncore: Add Skylake server uncore support") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-03-20perf/x86/intel: Rename confusing 'freerunning PEBS' API and implementation ↵Kan Liang4-13/+13
to 'large PEBS' The 'freerunning PEBS' and 'large PEBS' are the same thing. Both of these names appear in the code and in the API, which causes confusion. Rename 'freerunning PEBS' to 'large PEBS' to unify the code, which eliminates the confusion. No functional change. Reported-by: Vince Weaver <[email protected]> Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-03-20jump_label: Disable jump labels in __exit codeJosh Poimboeuf3-6/+7
With the following commit: 333522447063 ("jump_label: Explicitly disable jump labels in __init code") ... we explicitly disabled jump labels in __init code, so they could be detected and not warned about in the following commit: dc1dd184c2f0 ("jump_label: Warn on failed jump_label patching attempt") In-kernel __exit code has the same issue. It's never used, so it's freed along with the rest of initmem. But jump label entries in __exit code aren't explicitly disabled, so we get the following warning when enabling pr_debug() in __exit code: can't patch jump_label at dmi_sysfs_exit+0x0/0x2d WARNING: CPU: 0 PID: 22572 at kernel/jump_label.c:376 __jump_label_update+0x9d/0xb0 Fix the warning by disabling all jump labels in initmem (which includes both __init and __exit code). Reported-and-tested-by: Li Wang <[email protected]> Signed-off-by: Josh Poimboeuf <[email protected]> Cc: Borislav Petkov <[email protected]> Cc: Jason Baron <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Fixes: dc1dd184c2f0 ("jump_label: Warn on failed jump_label patching attempt") Link: http://lkml.kernel.org/r/7121e6e595374f06616c505b6e690e275c0054d1.1521483452.git.jpoimboe@redhat.com Signed-off-by: Ingo Molnar <[email protected]>
2018-03-20perf/x86/intel/uncore: Add missing filter constraint for SKX CHA eventStephane Eranian1-0/+1
Adding a filter constraint for Intel Skylake CHA event UNC_CHA_UPI_CREDITS_ACQUIRED (0x38). The event supports core-id/thread-id and link filtering. Signed-off-by: Stephane Eranian <[email protected]> Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-03-20perf/x86/intel: Don't accidentally clear high bits in bdw_limit_period()Dan Carpenter1-1/+1
We intended to clear the lowest 6 bits but because of a type bug we clear the high 32 bits as well. Andi says that periods are rarely more than U32_MAX so this bug probably doesn't have a huge runtime impact. Signed-off-by: Dan Carpenter <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: H. Peter Anvin <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Kan Liang <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Sebastian Andrzej Siewior <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Fixes: 294fe0f52a44 ("perf/x86/intel: Add INST_RETIRED.ALL workarounds") Link: http://lkml.kernel.org/r/20180317115216.GB4035@mwanda Signed-off-by: Ingo Molnar <[email protected]>
2018-03-20perf/x86/intel: Disable userspace RDPMC usage for large PEBSKan Liang1-1/+2
Userspace RDPMC cannot possibly work for large PEBS, which was introduced in: b8241d20699e ("perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold)") When the PEBS interrupt threshold is larger than one, there is no way to get exact auto-reload times and value for userspace RDPMC. Disable the userspace RDPMC usage when large PEBS is enabled. The only exception is when the PEBS interrupt threshold is 1, in which case user-space RDPMC works well even with auto-reload events. Signed-off-by: Kan Liang <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Alexander Shishkin <[email protected]> Cc: Arnaldo Carvalho de Melo <[email protected]> Cc: Jiri Olsa <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Stephane Eranian <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: Vince Weaver <[email protected]> Cc: [email protected] Fixes: b8241d20699e ("perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold)") Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]> (cherry picked from commit 1af22eba248efe2de25658041a80a3d40fb3e92e)
2018-03-20locking/mutex: Improve documentationMatthew Wilcox1-7/+30
On Wed, Mar 14, 2018 at 01:56:31PM -0700, Andrew Morton wrote: > My memory is weak and our documentation is awful. What does > mutex_lock_killable() actually do and how does it differ from > mutex_lock_interruptible()? Add kernel-doc for mutex_lock_killable() and mutex_lock_io(). Reword the kernel-doc for mutex_lock_interruptible(). Signed-off-by: Matthew Wilcox <[email protected]> Signed-off-by: Peter Zijlstra (Intel) <[email protected]> Cc: Andrew Morton <[email protected]> Cc: Jonathan Corbet <[email protected]> Cc: Kirill Tkhai <[email protected]> Cc: Linus Torvalds <[email protected]> Cc: Mauro Carvalho Chehab <[email protected]> Cc: Paul E. McKenney <[email protected]> Cc: Peter Zijlstra <[email protected]> Cc: Thomas Gleixner <[email protected]> Cc: [email protected] Cc: [email protected] Link: http://lkml.kernel.org/r/[email protected] Signed-off-by: Ingo Molnar <[email protected]>
2018-03-19Merge branch 'phy-relax-error-checking'David S. Miller2-4/+12
Grygorii Strashko says: ==================== net: phy: relax error checking when creating sysfs link netdev->phydev Some ethernet drivers (like TI CPSW) may connect and manage >1 Net PHYs per one netdevice, as result such drivers will produce warning during system boot and fail to connect second phy to netdevice when PHYLIB framework will try to create sysfs link netdev->phydev for second PHY in phy_attach_direct(), because sysfs link with the same name has been created already for the first PHY. As result, second CPSW external port will became unusable. This regression was introduced by commits: 5568363f0cb3 ("net: phy: Create sysfs reciprocal links for attached_dev/phydev" a3995460491d ("net: phy: Relax error checking on sysfs_create_link()" Patch 1: exports sysfs_create_link_nowarn() function as preparation for Patch 2. Patch 2: relaxes error checking when PHYLIB framework is creating sysfs link netdev->phydev in phy_attach_direct(), suppresses warning by using sysfs_create_link_nowarn() and adds error message instead, so links creation failure is not fatal any more and system can continue working, which fixes TI CPSW issue and makes boot logs accessible in case of NFS boot, for example. This can be stable material 4.13+. Changes in v2: - commit messages updated. v1: https://patchwork.ozlabs.org/cover/886058/ ==================== Signed-off-by: David S. Miller <[email protected]>
2018-03-19net: phy: relax error checking when creating sysfs link netdev->phydevGrygorii Strashko1-4/+11
Some ethernet drivers (like TI CPSW) may connect and manage >1 Net PHYs per one netdevice, as result such drivers will produce warning during system boot and fail to connect second phy to netdevice when PHYLIB framework will try to create sysfs link netdev->phydev for second PHY in phy_attach_direct(), because sysfs link with the same name has been created already for the first PHY. As result, second CPSW external port will became unusable. Fix it by relaxing error checking when PHYLIB framework is creating sysfs link netdev->phydev in phy_attach_direct(), suppressing warning by using sysfs_create_link_nowarn() and adding error message instead. After this change links (phy->netdev and netdev->phy) creation failure is not fatal any more and system can continue working, which fixes TI CPSW issue. Cc: Florian Fainelli <[email protected]> Cc: Andrew Lunn <[email protected]> Fixes: a3995460491d ("net: phy: Relax error checking on sysfs_create_link()") Signed-off-by: Grygorii Strashko <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2018-03-19sysfs: symlink: export sysfs_create_link_nowarn()Grygorii Strashko1-0/+1
The sysfs_create_link_nowarn() is going to be used in phylib framework in subsequent patch which can be built as module. Hence, export sysfs_create_link_nowarn() to avoid build errors. Cc: Florian Fainelli <[email protected]> Cc: Andrew Lunn <[email protected]> Fixes: a3995460491d ("net: phy: Relax error checking on sysfs_create_link()") Signed-off-by: Grygorii Strashko <[email protected]> Acked-by: Greg Kroah-Hartman <[email protected]> Signed-off-by: David S. Miller <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.