aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)AuthorFilesLines
2020-01-02Merge tag 'mediatek-drm-fixes-5.5' of ↵Dave Airlie2-35/+50
https://github.com/ckhu-mediatek/linux.git-tags into drm-fixes Mediatek DRM fixes for Linux 5.5 Signed-off-by: Dave Airlie <[email protected]> From: CK Hu <[email protected]> Link: https://patchwork.freedesktop.org/patch/msgid/1577762298.23194.2.camel@mtksdaap41
2020-01-01drm/amdgpu: correct RLC firmwares loading sequenceEvan Quan2-2/+2
Per confirmation with RLC firmware team, the RLC should be unhalted after all RLC related firmwares uploaded. However, in fact the RLC is unhalted immediately after RLCG firmware uploaded. And that may causes unexpected PSP hang on loading the succeeding RLC save restore list related firmwares. So, we correct the firmware loading sequence to load RLC save restore list related firmwares before RLCG ucode. That will help to get around this issue. Signed-off-by: Evan Quan <[email protected]> Reviewed-by: Hawking Zhang <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2019-12-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netLinus Torvalds80-489/+600
Pull networking fixes from David Miller: 1) Fix big endian overflow in nf_flow_table, from Arnd Bergmann. 2) Fix port selection on big endian in nft_tproxy, from Phil Sutter. 3) Fix precision tracking for unbound scalars in bpf verifier, from Daniel Borkmann. 4) Fix integer overflow in socket rcvbuf check in UDP, from Antonio Messina. 5) Do not perform a neigh confirmation during a pmtu update over a tunnel, from Hangbin Liu. 6) Fix DMA mapping leak in dpaa_eth driver, from Madalin Bucur. 7) Various PTP fixes for sja1105 dsa driver, from Vladimir Oltean. 8) Add missing to dummy definition of of_mdiobus_child_is_phy(), from Geert Uytterhoeven * git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (54 commits) hsr: fix slab-out-of-bounds Read in hsr_debugfs_rename() net/sched: add delete_empty() to filters and use it in cls_flower tcp: Fix highest_sack and highest_sack_seq ptp: fix the race between the release of ptp_clock and cdev net: dsa: sja1105: Reconcile the meaning of TPID and TPID2 for E/T and P/Q/R/S Documentation: net: dsa: sja1105: Remove text about taprio base-time limitation net: dsa: sja1105: Remove restriction of zero base-time for taprio offload net: dsa: sja1105: Really make the PTP command read-write net: dsa: sja1105: Take PTP egress timestamp by port, not mgmt slot cxgb4/cxgb4vf: fix flow control display for auto negotiation mlxsw: spectrum: Use dedicated policer for VRRP packets mlxsw: spectrum_router: Skip loopback RIFs during MAC validation net: stmmac: dwmac-meson8b: Fix the RGMII TX delay on Meson8b/8m2 SoCs net/sched: act_mirred: Pull mac prior redir to non mac_header_xmit device net_sched: sch_fq: properly set sk->sk_pacing_status bnx2x: Fix accounting of vlan resources among the PFs bnx2x: Use appropriate define for vlan credit of: mdio: Add missing inline to of_mdiobus_child_is_phy() dummy net: phy: aquantia: add suspend / resume ops for AQR105 dpaa_eth: fix DMA mapping leak ...
2019-12-31Merge tag 'tomoyo-fixes-for-5.5' of ↵Linus Torvalds5-44/+27
git://git.osdn.net/gitroot/tomoyo/tomoyo-test1 Pull tomoyo fixes from Tetsuo Handa: "Two bug fixes: - Suppress RCU warning at list_for_each_entry_rcu() - Don't use fancy names on sockets" * tag 'tomoyo-fixes-for-5.5' of git://git.osdn.net/gitroot/tomoyo/tomoyo-test1: tomoyo: Suppress RCU warning at list_for_each_entry_rcu(). tomoyo: Don't use nifty names on sockets.
2019-12-30hsr: fix slab-out-of-bounds Read in hsr_debugfs_rename()Taehee Yoo1-1/+2
hsr slave interfaces don't have debugfs directory. So, hsr_debugfs_rename() shouldn't be called when hsr slave interface name is changed. Test commands: ip link add dummy0 type dummy ip link add dummy1 type dummy ip link add hsr0 type hsr slave1 dummy0 slave2 dummy1 ip link set dummy0 name ap Splat looks like: [21071.899367][T22666] ap: renamed from dummy0 [21071.914005][T22666] ================================================================== [21071.919008][T22666] BUG: KASAN: slab-out-of-bounds in hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.923640][T22666] Read of size 8 at addr ffff88805febcd98 by task ip/22666 [21071.926941][T22666] [21071.927750][T22666] CPU: 0 PID: 22666 Comm: ip Not tainted 5.5.0-rc2+ #240 [21071.929919][T22666] Hardware name: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006 [21071.935094][T22666] Call Trace: [21071.935867][T22666] dump_stack+0x96/0xdb [21071.936687][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.937774][T22666] print_address_description.constprop.5+0x1be/0x360 [21071.939019][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.940081][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.940949][T22666] __kasan_report+0x12a/0x16f [21071.941758][T22666] ? hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.942674][T22666] kasan_report+0xe/0x20 [21071.943325][T22666] hsr_debugfs_rename+0xaa/0xb0 [hsr] [21071.944187][T22666] hsr_netdev_notify+0x1fe/0x9b0 [hsr] [21071.945052][T22666] ? __module_text_address+0x13/0x140 [21071.945897][T22666] notifier_call_chain+0x90/0x160 [21071.946743][T22666] dev_change_name+0x419/0x840 [21071.947496][T22666] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [21071.948600][T22666] ? netdev_adjacent_rename_links+0x280/0x280 [21071.949577][T22666] ? __read_once_size_nocheck.constprop.6+0x10/0x10 [21071.950672][T22666] ? lock_downgrade+0x6e0/0x6e0 [21071.951345][T22666] ? do_setlink+0x811/0x2ef0 [21071.951991][T22666] do_setlink+0x811/0x2ef0 [21071.952613][T22666] ? is_bpf_text_address+0x81/0xe0 [ ... ] Reported-by: [email protected] Fixes: 4c2d5e33dcd3 ("hsr: rename debugfs file when interface name is changed") Signed-off-by: Taehee Yoo <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-30net/sched: add delete_empty() to filters and use it in cls_flowerDavide Caratti4-51/+22
Revert "net/sched: cls_u32: fix refcount leak in the error path of u32_change()", and fix the u32 refcount leak in a more generic way that preserves the semantic of rule dumping. On tc filters that don't support lockless insertion/removal, there is no need to guard against concurrent insertion when a removal is in progress. Therefore, for most of them we can avoid a full walk() when deleting, and just decrease the refcount, like it was done on older Linux kernels. This fixes situations where walk() was wrongly detecting a non-empty filter, like it happened with cls_u32 in the error path of change(), thus leading to failures in the following tdc selftests: 6aa7: (filter, u32) Add/Replace u32 with source match and invalid indev 6658: (filter, u32) Add/Replace u32 with custom hash table and invalid handle 74c2: (filter, u32) Add/Replace u32 filter with invalid hash table id On cls_flower, and on (future) lockless filters, this check is necessary: move all the check_empty() logic in a callback so that each filter can have its own implementation. For cls_flower, it's sufficient to check if no IDRs have been allocated. This reverts commit 275c44aa194b7159d1191817b20e076f55f0e620. Changes since v1: - document the need for delete_empty() when TCF_PROTO_OPS_DOIT_UNLOCKED is used, thanks to Vlad Buslov - implement delete_empty() without doing fl_walk(), thanks to Vlad Buslov - squash revert and new fix in a single patch, to be nice with bisect tests that run tdc on u32 filter, thanks to Dave Miller Fixes: 275c44aa194b ("net/sched: cls_u32: fix refcount leak in the error path of u32_change()") Fixes: 6676d5e416ee ("net: sched: set dedicated tcf_walker flag when tp is empty") Suggested-by: Jamal Hadi Salim <[email protected]> Suggested-by: Vlad Buslov <[email protected]> Signed-off-by: Davide Caratti <[email protected]> Reviewed-by: Vlad Buslov <[email protected]> Tested-by: Jamal Hadi Salim <[email protected]> Acked-by: Jamal Hadi Salim <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-30tcp: Fix highest_sack and highest_sack_seqCambda Zhu1-0/+3
>From commit 50895b9de1d3 ("tcp: highest_sack fix"), the logic about setting tp->highest_sack to the head of the send queue was removed. Of course the logic is error prone, but it is logical. Before we remove the pointer to the highest sack skb and use the seq instead, we need to set tp->highest_sack to NULL when there is no skb after the last sack, and then replace NULL with the real skb when new skb inserted into the rtx queue, because the NULL means the highest sack seq is tp->snd_nxt. If tp->highest_sack is NULL and new data sent, the next ACK with sack option will increase tp->reordering unexpectedly. This patch sets tp->highest_sack to the tail of the rtx queue if it's NULL and new data is sent. The patch keeps the rule that the highest_sack can only be maintained by sack processing, except for this only case. Fixes: 50895b9de1d3 ("tcp: highest_sack fix") Signed-off-by: Cambda Zhu <[email protected]> Signed-off-by: Eric Dumazet <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-30ptp: fix the race between the release of ptp_clock and cdevVladis Dronov4-44/+39
In a case when a ptp chardev (like /dev/ptp0) is open but an underlying device is removed, closing this file leads to a race. This reproduces easily in a kvm virtual machine: ts# cat openptp0.c int main() { ... fp = fopen("/dev/ptp0", "r"); ... sleep(10); } ts# uname -r 5.5.0-rc3-46cf053e ts# cat /proc/cmdline ... slub_debug=FZP ts# modprobe ptp_kvm ts# ./openptp0 & [1] 670 opened /dev/ptp0, sleeping 10s... ts# rmmod ptp_kvm ts# ls /dev/ptp* ls: cannot access '/dev/ptp*': No such file or directory ts# ...woken up [ 48.010809] general protection fault: 0000 [#1] SMP [ 48.012502] CPU: 6 PID: 658 Comm: openptp0 Not tainted 5.5.0-rc3-46cf053e #25 [ 48.014624] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), ... [ 48.016270] RIP: 0010:module_put.part.0+0x7/0x80 [ 48.017939] RSP: 0018:ffffb3850073be00 EFLAGS: 00010202 [ 48.018339] RAX: 000000006b6b6b6b RBX: 6b6b6b6b6b6b6b6b RCX: ffff89a476c00ad0 [ 48.018936] RDX: fffff65a08d3ea08 RSI: 0000000000000247 RDI: 6b6b6b6b6b6b6b6b [ 48.019470] ... ^^^ a slub poison [ 48.023854] Call Trace: [ 48.024050] __fput+0x21f/0x240 [ 48.024288] task_work_run+0x79/0x90 [ 48.024555] do_exit+0x2af/0xab0 [ 48.024799] ? vfs_write+0x16a/0x190 [ 48.025082] do_group_exit+0x35/0x90 [ 48.025387] __x64_sys_exit_group+0xf/0x10 [ 48.025737] do_syscall_64+0x3d/0x130 [ 48.026056] entry_SYSCALL_64_after_hwframe+0x44/0xa9 [ 48.026479] RIP: 0033:0x7f53b12082f6 [ 48.026792] ... [ 48.030945] Modules linked in: ptp i6300esb watchdog [last unloaded: ptp_kvm] [ 48.045001] Fixing recursive fault but reboot is needed! This happens in: static void __fput(struct file *file) { ... if (file->f_op->release) file->f_op->release(inode, file); <<< cdev is kfree'd here if (unlikely(S_ISCHR(inode->i_mode) && inode->i_cdev != NULL && !(mode & FMODE_PATH))) { cdev_put(inode->i_cdev); <<< cdev fields are accessed here Namely: __fput() posix_clock_release() kref_put(&clk->kref, delete_clock) <<< the last reference delete_clock() delete_ptp_clock() kfree(ptp) <<< cdev is embedded in ptp cdev_put module_put(p->owner) <<< *p is kfree'd, bang! Here cdev is embedded in posix_clock which is embedded in ptp_clock. The race happens because ptp_clock's lifetime is controlled by two refcounts: kref and cdev.kobj in posix_clock. This is wrong. Make ptp_clock's sysfs device a parent of cdev with cdev_device_add() created especially for such cases. This way the parent device with its ptp_clock is not released until all references to the cdev are released. This adds a requirement that an initialized but not exposed struct device should be provided to posix_clock_register() by a caller instead of a simple dev_t. This approach was adopted from the commit 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev"). See details of the implementation in the commit 233ed09d7fda ("chardev: add helper function to register char devs with a struct device"). Link: https://lore.kernel.org/linux-fsdevel/[email protected]/T/#u Analyzed-by: Stephen Johnston <[email protected]> Analyzed-by: Vern Lovejoy <[email protected]> Signed-off-by: Vladis Dronov <[email protected]> Acked-by: Richard Cochran <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-30net: dsa: sja1105: Reconcile the meaning of TPID and TPID2 for E/T and P/Q/R/SVladimir Oltean2-6/+9
For first-generation switches (SJA1105E and SJA1105T): - TPID means C-Tag (typically 0x8100) - TPID2 means S-Tag (typically 0x88A8) While for the second generation switches (SJA1105P, SJA1105Q, SJA1105R, SJA1105S) it is the other way around: - TPID means S-Tag (typically 0x88A8) - TPID2 means C-Tag (typically 0x8100) In other words, E/T tags untagged traffic with TPID, and P/Q/R/S with TPID2. So the patch mentioned below fixed VLAN filtering for P/Q/R/S, but broke it for E/T. We strive for a common code path for all switches in the family, so just lie in the static config packing functions that TPID and TPID2 are at swapped bit offsets than they actually are, for P/Q/R/S. This will make both switches understand TPID to be ETH_P_8021Q and TPID2 to be ETH_P_8021AD. The meaning from the original E/T was chosen over P/Q/R/S because E/T is actually the one with public documentation available (UM10944.pdf). Fixes: f9a1a7646c0d ("net: dsa: sja1105: Reverse TPID and TPID2") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-30Documentation: net: dsa: sja1105: Remove text about taprio base-time limitationVladimir Oltean1-6/+0
Since commit 86db36a347b4 ("net: dsa: sja1105: Implement state machine for TAS with PTP clock source"), this paragraph is no longer true. So remove it. Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-30net: dsa: sja1105: Remove restriction of zero base-time for taprio offloadVladimir Oltean1-5/+0
The check originates from the initial implementation which was not based on PTP time but on a standalone clock source. In the meantime we can now program the PTPSCHTM register at runtime with the dynamic base time (actually with a value that is 200 ns smaller, to avoid writing DELTA=0 in the Schedule Entry Points Parameters Table). And we also have logic for moving the actual base time in the future of the PHC's current time base, so the check for zero serves no purpose, since even if the user will specify zero, that's not what will end up in the static config table where the limitation is. Fixes: 86db36a347b4 ("net: dsa: sja1105: Implement state machine for TAS with PTP clock source") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-30net: dsa: sja1105: Really make the PTP command read-writeVladimir Oltean1-1/+1
When activating tc-taprio offload on the switch ports, the TAS state machine will try to check whether it is running or not, but will find both the STARTED and STOPPED bits as false in the sja1105_tas_check_running function. So the function will return -EINVAL (an abnormal situation) and the kernel will keep printing this from the TAS FSM workqueue: [ 37.691971] sja1105 spi0.1: An operation returned -22 The reason is that the underlying function that gets called, sja1105_ptp_commit, does not actually do a SPI_READ, but a SPI_WRITE. So the command buffer remains initialized with zeroes instead of retrieving the hardware state. Fix that. Fixes: 41603d78b362 ("net: dsa: sja1105: Make the PTP command read-write") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-30net: dsa: sja1105: Take PTP egress timestamp by port, not mgmt slotVladimir Oltean2-3/+3
The PTP egress timestamp N must be captured from register PTPEGR_TS[n], where n = 2 * PORT + TSREG. There are 10 PTPEGR_TS registers, 2 per port. We are only using TSREG=0. As opposed to the management slots, which are 4 in number (SJA1105_NUM_PORTS, minus the CPU port). Any management frame (which includes PTP frames) can be sent to any non-CPU port through any management slot. When the CPU port is not the last port (#4), there will be a mismatch between the slot and the port number. Luckily, the only mainline occurrence with this switch (arch/arm/boot/dts/ls1021a-tsn.dts) does have the CPU port as #4, so the issue did not manifest itself thus far. Fixes: 47ed985e97f5 ("net: dsa: sja1105: Add logic for TX timestamping") Signed-off-by: Vladimir Oltean <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-31spi: spi-fsl-dspi: Fix 16-bit word order in 32-bit XSPI modeVladimir Oltean1-11/+4
When used in Extended SPI mode on LS1021A, the DSPI controller wants to have the least significant 16-bit word written first to the TX FIFO. In fact, the LS1021A reference manual says: 33.5.2.4.2 Draining the TX FIFO When Extended SPI Mode (DSPIx_MCR[XSPI]) is enabled, if the frame size of SPI Data to be transmitted is more than 16 bits, then it causes two Data entries to be popped from TX FIFO simultaneously which are transferred to the shift register. The first of the two popped entries forms the 16 least significant bits of the SPI frame to be transmitted. So given the following TX buffer: +-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+ | 0x0 | 0x1 | 0x2 | 0x3 | 0x4 | 0x5 | 0x6 | 0x7 | 0x8 | 0x9 | 0xa | 0xb | +-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+-----+ | 32-bit word 1 | 32-bit word 2 | 32-bit word 3 | +-----------------------+-----------------------+-----------------------+ The correct way that a little-endian system should transmit it on the wire when bits_per_word is 32 is: 0x03020100 0x07060504 0x0b0a0908 But it is actually transmitted as following, as seen with a scope: 0x01000302 0x05040706 0x09080b0a It appears that this patch has been submitted at least once before: https://lkml.org/lkml/2018/9/21/286 but in that case Chuanhua Han did not manage to explain the problem clearly enough and the patch did not get merged, leaving XSPI mode broken. Fixes: 8fcd151d2619 ("spi: spi-fsl-dspi: XSPI FIFO handling (in TCFQ mode)") Cc: Esben Haabendal <[email protected]> Cc: Chuanhua Han <[email protected]> Signed-off-by: Vladimir Oltean <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Mark Brown <[email protected]> Cc: [email protected]
2019-12-30cxgb4/cxgb4vf: fix flow control display for auto negotiationRahul Lakkireddy6-19/+30
As per 802.3-2005, Section Two, Annex 28B, Table 28B-2 [1], when _only_ Rx pause is enabled, both symmetric and asymmetric pause towards local device must be enabled. Also, firmware returns the local device's flow control pause params as part of advertised capabilities and negotiated params as part of current link attributes. So, fix up ethtool's flow control pause params fetch logic to read from acaps, instead of linkattr. [1] https://standards.ieee.org/standard/802_3-2005.html Fixes: c3168cabe1af ("cxgb4/cxgbvf: Handle 32-bit fw port capabilities") Signed-off-by: Surendra Mobiya <[email protected]> Signed-off-by: Rahul Lakkireddy <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-30kernel.h: Remove unused FIELD_SIZEOF()Kees Cook1-9/+0
Now that all callers of FIELD_SIZEOF() have been converted to sizeof_field(), remove the unused prior macro. Signed-off-by: Kees Cook <[email protected]>
2019-12-30null_blk: Fix REQ_OP_ZONE_CLOSE handlingDamien Le Moal1-1/+4
In order to match ZBC defined behavior, closing an empty zone must result in the "empty" zone condition instead of the "closed" condition. Fixes: da644b2cc1a4 ("null_blk: add zone open, close, and finish support") Signed-off-by: Damien Le Moal <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-12-30block: fix splitting segments on boundary masksMing Lei1-9/+9
We ran into a problem with a mpt3sas based controller, where we would see random (and hard to reproduce) file corruption). The issue seemed specific to this controller, but wasn't specific to the file system. After a lot of debugging, we find out that it's caused by segments spanning a 4G memory boundary. This shouldn't happen, as the default setting for segment boundary masks is 4G. Turns out there are two issues in get_max_segment_size(): 1) The default segment boundary mask is bypassed 2) The segment start address isn't taken into account when checking segment boundary limit Fix these two issues by removing the bypass of the segment boundary check even if the mask is set to the default value, and taking into account the actual start address of the request when checking if a segment needs splitting. Cc: [email protected] # v5.1+ Reviewed-by: Chris Mason <[email protected]> Tested-by: Chris Mason <[email protected]> Fixes: dcebd755926b ("block: use bio_for_each_bvec() to compute multi-page bvec count") Signed-off-by: Ming Lei <[email protected]> Dropped const on the page pointer, ppc page_to_phys() doesn't mark the page as const... Signed-off-by: Jens Axboe <[email protected]>
2019-12-30Btrfs: fix infinite loop during nocow writeback due to raceFilipe Manana1-3/+3
When starting writeback for a range that covers part of a preallocated extent, due to a race with writeback for another range that also covers another part of the same preallocated extent, we can end up in an infinite loop. Consider the following example where for inode 280 we have two dirty ranges: range A, from 294912 to 303103, 8192 bytes range B, from 348160 to 438271, 90112 bytes and we have the following file extent item layout for our inode: leaf 38895616 gen 24544 total ptrs 29 free space 13820 owner 5 (...) item 27 key (280 108 200704) itemoff 14598 itemsize 53 extent data disk bytenr 0 nr 0 type 1 (regular) extent data offset 0 nr 94208 ram 94208 item 28 key (280 108 294912) itemoff 14545 itemsize 53 extent data disk bytenr 10433052672 nr 81920 type 2 (prealloc) extent data offset 0 nr 81920 ram 81920 Then the following happens: 1) Writeback starts for range B (from 348160 to 438271), execution of run_delalloc_nocow() starts; 2) The first iteration of run_delalloc_nocow()'s whil loop leaves us at the extent item at slot 28, pointing to the prealloc extent item covering the range from 294912 to 376831. This extent covers part of our range; 3) An ordered extent is created against that extent, covering the file range from 348160 to 376831 (28672 bytes); 4) We adjust 'cur_offset' to 376832 and move on to the next iteration of the while loop; 5) The call to btrfs_lookup_file_extent() leaves us at the same leaf, pointing to slot 29, 1 slot after the last item (the extent item we processed in the previous iteration); 6) Because we are a slot beyond the last item, we call btrfs_next_leaf(), which releases the search path before doing a another search for the last key of the leaf (280 108 294912); 7) Right after btrfs_next_leaf() released the path, and before it did another search for the last key of the leaf, writeback for the range A (from 294912 to 303103) completes (it was previously started at some point); 8) Upon completion of the ordered extent for range A, the prealloc extent we previously found got split into two extent items, one covering the range from 294912 to 303103 (8192 bytes), with a type of regular extent (and no longer prealloc) and another covering the range from 303104 to 376831 (73728 bytes), with a type of prealloc and an offset of 8192 bytes. So our leaf now has the following layout: leaf 38895616 gen 24544 total ptrs 31 free space 13664 owner 5 (...) item 27 key (280 108 200704) itemoff 14598 itemsize 53 extent data disk bytenr 0 nr 0 type 1 extent data offset 0 nr 8192 ram 94208 item 28 key (280 108 208896) itemoff 14545 itemsize 53 extent data disk bytenr 10433142784 nr 86016 type 1 extent data offset 0 nr 86016 ram 86016 item 29 key (280 108 294912) itemoff 14492 itemsize 53 extent data disk bytenr 10433052672 nr 81920 type 1 extent data offset 0 nr 8192 ram 81920 item 30 key (280 108 303104) itemoff 14439 itemsize 53 extent data disk bytenr 10433052672 nr 81920 type 2 extent data offset 8192 nr 73728 ram 81920 9) After btrfs_next_leaf() returns, we have our path pointing to that same leaf and at slot 30, since it has a key we didn't have before and it's the first key greater then the key that was previously the last key of the leaf (key (280 108 294912)); 10) The extent item at slot 30 covers the range from 303104 to 376831 which is in our target range, so we process it, despite having already created an ordered extent against this extent for the file range from 348160 to 376831. This is because we skip to the next extent item only if its end is less than or equals to the start of our delalloc range, and not less than or equals to the current offset ('cur_offset'); 11) As a result we compute 'num_bytes' as: num_bytes = min(end + 1, extent_end) - cur_offset; = min(438271 + 1, 376832) - 376832 = 0 12) We then call create_io_em() for a 0 bytes range starting at offset 376832; 13) Then create_io_em() enters an infinite loop because its calls to btrfs_drop_extent_cache() do nothing due to the 0 length range passed to it. So no existing extent maps that cover the offset 376832 get removed, and therefore calls to add_extent_mapping() return -EEXIST, resulting in an infinite loop. This loop from create_io_em() is the following: do { btrfs_drop_extent_cache(BTRFS_I(inode), em->start, em->start + em->len - 1, 0); write_lock(&em_tree->lock); ret = add_extent_mapping(em_tree, em, 1); write_unlock(&em_tree->lock); /* * The caller has taken lock_extent(), who could race with us * to add em? */ } while (ret == -EEXIST); Also, each call to btrfs_drop_extent_cache() triggers a warning because the start offset passed to it (376832) is smaller then the end offset (376832 - 1) passed to it by -1, due to the 0 length: [258532.052621] ------------[ cut here ]------------ [258532.052643] WARNING: CPU: 0 PID: 9987 at fs/btrfs/file.c:602 btrfs_drop_extent_cache+0x3f4/0x590 [btrfs] (...) [258532.052672] CPU: 0 PID: 9987 Comm: fsx Tainted: G W 5.4.0-rc7-btrfs-next-64 #1 [258532.052673] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-0-ga698c8995f-prebuilt.qemu.org 04/01/2014 [258532.052691] RIP: 0010:btrfs_drop_extent_cache+0x3f4/0x590 [btrfs] (...) [258532.052695] RSP: 0018:ffffb4be0153f860 EFLAGS: 00010287 [258532.052700] RAX: ffff975b445ee360 RBX: ffff975b44eb3e08 RCX: 0000000000000000 [258532.052700] RDX: 0000000000038fff RSI: 0000000000039000 RDI: ffff975b445ee308 [258532.052700] RBP: 0000000000038fff R08: 0000000000000000 R09: 0000000000000001 [258532.052701] R10: ffff975b513c5c10 R11: 00000000e3c0cfa9 R12: 0000000000039000 [258532.052703] R13: ffff975b445ee360 R14: 00000000ffffffef R15: ffff975b445ee308 [258532.052705] FS: 00007f86a821de80(0000) GS:ffff975b76a00000(0000) knlGS:0000000000000000 [258532.052707] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [258532.052708] CR2: 00007fdacf0f3ab4 CR3: 00000001f9d26002 CR4: 00000000003606f0 [258532.052712] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [258532.052717] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [258532.052717] Call Trace: [258532.052718] ? preempt_schedule_common+0x32/0x70 [258532.052722] ? ___preempt_schedule+0x16/0x20 [258532.052741] create_io_em+0xff/0x180 [btrfs] [258532.052767] run_delalloc_nocow+0x942/0xb10 [btrfs] [258532.052791] btrfs_run_delalloc_range+0x30b/0x520 [btrfs] [258532.052812] ? find_lock_delalloc_range+0x221/0x250 [btrfs] [258532.052834] writepage_delalloc+0xe4/0x140 [btrfs] [258532.052855] __extent_writepage+0x110/0x4e0 [btrfs] [258532.052876] extent_write_cache_pages+0x21c/0x480 [btrfs] [258532.052906] extent_writepages+0x52/0xb0 [btrfs] [258532.052911] do_writepages+0x23/0x80 [258532.052915] __filemap_fdatawrite_range+0xd2/0x110 [258532.052938] btrfs_fdatawrite_range+0x1b/0x50 [btrfs] [258532.052954] start_ordered_ops+0x57/0xa0 [btrfs] [258532.052973] ? btrfs_sync_file+0x225/0x490 [btrfs] [258532.052988] btrfs_sync_file+0x225/0x490 [btrfs] [258532.052997] __x64_sys_msync+0x199/0x200 [258532.053004] do_syscall_64+0x5c/0x250 [258532.053007] entry_SYSCALL_64_after_hwframe+0x49/0xbe [258532.053010] RIP: 0033:0x7f86a7dfd760 (...) [258532.053014] RSP: 002b:00007ffd99af0368 EFLAGS: 00000246 ORIG_RAX: 000000000000001a [258532.053016] RAX: ffffffffffffffda RBX: 0000000000000ec9 RCX: 00007f86a7dfd760 [258532.053017] RDX: 0000000000000004 RSI: 000000000000836c RDI: 00007f86a8221000 [258532.053019] RBP: 0000000000021ec9 R08: 0000000000000003 R09: 00007f86a812037c [258532.053020] R10: 0000000000000001 R11: 0000000000000246 R12: 00000000000074a3 [258532.053021] R13: 00007f86a8221000 R14: 000000000000836c R15: 0000000000000001 [258532.053032] irq event stamp: 1653450494 [258532.053035] hardirqs last enabled at (1653450493): [<ffffffff9dec69f9>] _raw_spin_unlock_irq+0x29/0x50 [258532.053037] hardirqs last disabled at (1653450494): [<ffffffff9d4048ea>] trace_hardirqs_off_thunk+0x1a/0x20 [258532.053039] softirqs last enabled at (1653449852): [<ffffffff9e200466>] __do_softirq+0x466/0x6bd [258532.053042] softirqs last disabled at (1653449845): [<ffffffff9d4c8a0c>] irq_exit+0xec/0x120 [258532.053043] ---[ end trace 8476fce13d9ce20a ]--- Which results in flooding dmesg/syslog since btrfs_drop_extent_cache() uses WARN_ON() and not WARN_ON_ONCE(). So fix this issue by changing run_delalloc_nocow()'s loop to move to the next extent item when the current extent item ends at at offset less than or equals to the current offset instead of the start offset. Fixes: 80ff385665b7fc ("Btrfs: update nodatacow code v2") CC: [email protected] # 4.4+ Reviewed-by: Josef Bacik <[email protected]> Signed-off-by: Filipe Manana <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-30btrfs: fix compressed write bio blkcg attributionDennis Zhou1-4/+5
Bio attribution is handled at bio_set_dev() as once we have a device, we have a corresponding request_queue and then can derive the current css. In special cases, we want to attribute to bio to someone else. This can be done by calling bio_associate_blkg_from_css() or kthread_associate_blkcg() depending on the scenario. Btrfs does this for compressed writeback as they are handled by kworkers, so the latter can be done here. Commit 1a41802701ec ("btrfs: drop bio_set_dev where not needed") removes early bio_set_dev() calls prior to submit_stripe_bio(). This breaks the above assumption that we'll have a request_queue when we are doing association. To fix this, switch to using kthread_associate_blkcg(). Without this, we crash in btrfs/024: [ 3052.093088] BUG: kernel NULL pointer dereference, address: 0000000000000510 [ 3052.107013] #PF: supervisor read access in kernel mode [ 3052.107014] #PF: error_code(0x0000) - not-present page [ 3052.107015] PGD 0 P4D 0 [ 3052.107021] Oops: 0000 [#1] SMP [ 3052.138904] CPU: 42 PID: 201270 Comm: kworker/u161:0 Kdump: loaded Not tainted 5.5.0-rc1-00062-g4852d8ac90a9 #712 [ 3052.138905] Hardware name: Quanta Tioga Pass Single Side 01-0032211004/Tioga Pass Single Side, BIOS F08_3A18 12/20/2018 [ 3052.138912] Workqueue: btrfs-delalloc btrfs_work_helper [ 3052.191375] RIP: 0010:bio_associate_blkg_from_css+0x1e/0x3c0 [ 3052.191379] RSP: 0018:ffffc900210cfc90 EFLAGS: 00010282 [ 3052.191380] RAX: 0000000000000000 RBX: ffff88bfe5573c00 RCX: 0000000000000000 [ 3052.191382] RDX: ffff889db48ec2f0 RSI: ffff88bfe5573c00 RDI: ffff889db48ec2f0 [ 3052.191386] RBP: 0000000000000800 R08: 0000000000203bb0 R09: ffff889db16b2400 [ 3052.293364] R10: 0000000000000000 R11: ffff88a07fffde80 R12: ffff889db48ec2f0 [ 3052.293365] R13: 0000000000001000 R14: ffff889de82bc000 R15: ffff889e2b7bdcc8 [ 3052.293367] FS: 0000000000000000(0000) GS:ffff889ffba00000(0000) knlGS:0000000000000000 [ 3052.293368] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 3052.293369] CR2: 0000000000000510 CR3: 0000000002611001 CR4: 00000000007606e0 [ 3052.293370] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 3052.293371] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 3052.293372] PKRU: 55555554 [ 3052.293376] Call Trace: [ 3052.402552] btrfs_submit_compressed_write+0x137/0x390 [ 3052.402558] submit_compressed_extents+0x40f/0x4c0 [ 3052.422401] btrfs_work_helper+0x246/0x5a0 [ 3052.422408] process_one_work+0x200/0x570 [ 3052.438601] ? process_one_work+0x180/0x570 [ 3052.438605] worker_thread+0x4c/0x3e0 [ 3052.438614] kthread+0x103/0x140 [ 3052.460735] ? process_one_work+0x570/0x570 [ 3052.460737] ? kthread_mod_delayed_work+0xc0/0xc0 [ 3052.460744] ret_from_fork+0x24/0x30 Fixes: 1a41802701ec ("btrfs: drop bio_set_dev where not needed") Reported-by: Chris Murphy <[email protected]> Signed-off-by: Dennis Zhou <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-30btrfs: punt all bios created in btrfs_submit_compressed_write()Dennis Zhou1-0/+4
Compressed writes happen in the background via kworkers. However, this causes bios to be attributed to root bypassing any cgroup limits from the actual writer. We tag the first bio with REQ_CGROUP_PUNT, which will punt the bio to an appropriate cgroup specific workqueue and attribute the IO properly. However, if btrfs_submit_compressed_write() creates a new bio, we don't tag it the same way. Add the appropriate tagging for subsequent bios. Fixes: ec39f7696ccfa ("Btrfs: use REQ_CGROUP_PUNT for worker thread submitted bios") Reviewed-by: Chris Mason <[email protected]> Signed-off-by: Dennis Zhou <[email protected]> Reviewed-by: David Sterba <[email protected]> Signed-off-by: David Sterba <[email protected]>
2019-12-30watchdog: orion: fix platform_get_irq() complaintsRussell King1-2/+2
Fix: orion_wdt f1020300.watchdog: IRQ index 1 not found which is caused by platform_get_irq() now complaining when optional IRQs are not found. Neither interrupt for orion is required, so make them both optional. Signed-off-by: Russell King <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2019-12-30watchdog: rn5t618_wdt: fix module aliasesAndreas Kemnade1-0/+1
Platform device aliases were missing so module autoloading did not work. Signed-off-by: Andreas Kemnade <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2019-12-30watchdog: tqmx86_wdt: Fix build errorYueHaibing1-0/+1
If TQMX86_WDT is y and WATCHDOG_CORE is m, building fails: drivers/watchdog/tqmx86_wdt.o: In function `tqmx86_wdt_probe': tqmx86_wdt.c:(.text+0x46e): undefined reference to `watchdog_init_timeout' tqmx86_wdt.c:(.text+0x4e0): undefined reference to `devm_watchdog_register_device' Select WATCHDOG_CORE to fix this. Reported-by: Hulk Robot <[email protected]> Fixes: e3c21e088f89 ("watchdog: tqmx86: Add watchdog driver for the IO controller") Signed-off-by: YueHaibing <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2019-12-30watchdog: max77620_wdt: fix potential build errorsDavid Engraf1-0/+1
max77620_wdt uses watchdog core functions. Enable CONFIG_WATCHDOG_CORE to fix potential build errors. Signed-off-by: David Engraf <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2019-12-30watchdog: imx7ulp: Fix missing conversion of imx7ulp_wdt_enable()Fabio Estevam1-1/+1
Since commit 747d88a1a88c1b ("watchdog: imx7ulp: Pass the wdog instance in imx7ulp_wdt_enable()") imx7ulp_wdt_enable() accepts a watchdog_device structure, so fix one instance that missed such conversion. This also fixes the following sparse warning: drivers/watchdog/imx7ulp_wdt.c:115:31: warning: incorrect type in argument 1 (different address spaces) drivers/watchdog/imx7ulp_wdt.c:115:31: expected struct watchdog_device *wdog drivers/watchdog/imx7ulp_wdt.c:115:31: got void [noderef] <asn:2>*base Fixes: 747d88a1a88c1 ("watchdog: imx7ulp: Pass the wdog instance inimx7ulp_wdt_enable()") Signed-off-by: Fabio Estevam <[email protected]> Reviewed-by: Guenter Roeck <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2019-12-30watchdog: w83627hf_wdt: Fix support NCT6116DSrikanth Krishnakar1-1/+1
We should select nct6116 for the new chip, not nct6102. Signed-off-by: Srikanth Krishnakar <[email protected]> Signed-off-by: Guenter Roeck <[email protected]> Signed-off-by: Wim Van Sebroeck <[email protected]>
2019-12-30netfilter: arp_tables: init netns pointer in xt_tgchk_param structFlorian Westphal1-11/+16
We get crash when the targets checkentry function tries to make use of the network namespace pointer for arptables. When the net pointer got added back in 2010, only ip/ip6/ebtables were changed to initialize it, so arptables has this set to NULL. This isn't a problem for normal arptables because no existing arptables target has a checkentry function that makes use of par->net. However, direct users of the setsockopt interface can provide any target they want as long as its registered for ARP or UNPSEC protocols. syzkaller managed to send a semi-valid arptables rule for RATEEST target which is enough to trigger NULL deref: kasan: GPF could be caused by NULL-ptr deref or user memory access general protection fault: 0000 [#1] PREEMPT SMP KASAN RIP: xt_rateest_tg_checkentry+0x11d/0xb40 net/netfilter/xt_RATEEST.c:109 [..] xt_check_target+0x283/0x690 net/netfilter/x_tables.c:1019 check_target net/ipv4/netfilter/arp_tables.c:399 [inline] find_check_entry net/ipv4/netfilter/arp_tables.c:422 [inline] translate_table+0x1005/0x1d70 net/ipv4/netfilter/arp_tables.c:572 do_replace net/ipv4/netfilter/arp_tables.c:977 [inline] do_arpt_set_ctl+0x310/0x640 net/ipv4/netfilter/arp_tables.c:1456 Fixes: add67461240c1d ("netfilter: add struct net * to target parameters") Reported-by: [email protected] Signed-off-by: Florian Westphal <[email protected]> Acked-by: Cong Wang <[email protected]> Signed-off-by: Pablo Neira Ayuso <[email protected]>
2019-12-30powerpc/spinlocks: Include correct header for static keyJason A. Donenfeld1-0/+1
Recently, the spinlock implementation grew a static key optimization, but the jump_label.h header include was left out, leading to build errors: linux/arch/powerpc/include/asm/spinlock.h:44:7: error: implicit declaration of function ‘static_branch_unlikely’ 44 | if (!static_branch_unlikely(&shared_processor)) This commit adds the missing header. mpe: The build break is only seen with CONFIG_JUMP_LABEL=n. Fixes: 656c21d6af5d ("powerpc/shared: Use static key to detect shared processor") Signed-off-by: Jason A. Donenfeld <[email protected]> Reviewed-by: Srikar Dronamraju <[email protected]> Signed-off-by: Michael Ellerman <[email protected]> Link: https://lore.kernel.org/r/[email protected]
2019-12-30ALSA: hda/realtek - Enable the bass speaker of ASUS UX431FLCChris Chiu1-20/+18
ASUS reported that there's an bass speaker in addition to internal speaker and it uses DAC 0x02. It was not enabled in the commit 436e25505f34 ("ALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC") which only enables the amplifier and the front speaker. This commit enables the bass speaker on top of the aforementioned work to improve the acoustic experience. Fixes: 436e25505f34 ("ALSA: hda/realtek - Enable internal speaker of ASUS UX431FLC") Signed-off-by: Chris Chiu <[email protected]> Signed-off-by: Jian-Hong Pan <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2019-12-29Linux 5.5-rc4Linus Torvalds1-1/+1
2019-12-29HID: intel-ish-hid: ipc: Add Tiger Lake PCI device IDSrinivas Pandruvada2-0/+2
Added Tiger Lake PCI device ID to the supported device list. Signed-off-by: Srinivas Pandruvada <[email protected]> Signed-off-by: Jiri Kosina <[email protected]>
2019-12-29Merge branch 'mlxsw-fixes'David S. Miller3-2/+11
Ido Schimmel says: ==================== mlxsw: Couple of fixes This patch set contains two fixes for mlxsw. Please consider both for stable. Patch #1 from Amit fixes a wrong check during MAC validation when creating router interfaces (RIFs). Given a particular order of configuration this can result in the driver refusing to create new RIFs. Patch #2 fixes a wrong trap configuration in which VRRP packets and routing exceptions were policed by the same policer towards the CPU. In certain situations this can prevent VRRP packets from reaching the CPU. ==================== Signed-off-by: David S. Miller <[email protected]>
2019-12-29mlxsw: spectrum: Use dedicated policer for VRRP packetsIdo Schimmel2-2/+8
Currently, VRRP packets and packets that hit exceptions during routing (e.g., MTU error) are policed using the same policer towards the CPU. This means, for example, that misconfiguration of the MTU on a routed interface can prevent VRRP packets from reaching the CPU, which in turn can cause the VRRP daemon to assume it is the Master router. Fix this by using a dedicated policer for VRRP packets. Fixes: 11566d34f895 ("mlxsw: spectrum: Add VRRP traps") Signed-off-by: Ido Schimmel <[email protected]> Reported-by: Alex Veber <[email protected]> Tested-by: Alex Veber <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-29mlxsw: spectrum_router: Skip loopback RIFs during MAC validationAmit Cohen1-0/+3
When a router interface (RIF) is created the MAC address of the backing netdev is verified to have the same MSBs as existing RIFs. This is required in order to avoid changing existing RIF MAC addresses that all share the same MSBs. Loopback RIFs are special in this regard as they do not have a MAC address, given they are only used to loop packets from the overlay to the underlay. Without this change, an error is returned when trying to create a RIF after the creation of a GRE tunnel that is represented by a loopback RIF. 'rif->dev->dev_addr' points to the GRE device's local IP, which does not share the same MSBs as physical interfaces. Adding an IP address to any physical interface results in: Error: mlxsw_spectrum: All router interface MAC addresses must have the same prefix. Fix this by skipping loopback RIFs during MAC validation. Fixes: 74bc99397438 ("mlxsw: spectrum_router: Veto unsupported RIF MAC addresses") Signed-off-by: Amit Cohen <[email protected]> Signed-off-by: Ido Schimmel <[email protected]> Signed-off-by: David S. Miller <[email protected]>
2019-12-29Merge tag 'riscv/for-v5.5-rc4' of ↵Linus Torvalds4-3/+6
git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux Pull RISC-V fixes from Paul Walmsley: "One important fix for RISC-V: - Redirect any incoming syscall with an ID less than -1 to sys_ni_syscall, rather than allowing them to fall through into the syscall handler. and two minor build fixes: - Export __asm_copy_{from,to}_user() from where they are defined. This fixes a build error triggered by some randconfigs. - Export flush_icache_all(). I'd resisted this before, since historically we didn't want modules to be able to flush the I$ directly; but apparently everyone else is doing it now" * tag 'riscv/for-v5.5-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: riscv: export flush_icache_all to modules riscv: reject invalid syscalls below -1 riscv: fix compile failure with EXPORT_SYMBOL() & !MMU
2019-12-29Merge tag 'locks-v5.5-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux Pull /proc/locks formatting fix from Jeff Layton: "This is a trivial fix for a _very_ long standing bug in /proc/locks formatting. Ordinarily, I'd wait for the merge window for something like this, but it is making it difficult to validate some overlayfs fixes. I've also gone ahead and marked this for stable" * tag 'locks-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/jlayton/linux: locks: print unsigned ino in /proc/locks
2019-12-29Merge tag '5.5-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds3-10/+56
Pull cifs fixes from Steve French: "One performance fix for large directory searches, and one minor style cleanup noticed by Clang" * tag '5.5-rc3-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6: cifs: Optimize readdir on reparse points cifs: Adjust indentation in smb2_open_file
2019-12-29locks: print unsigned ino in /proc/locksAmir Goldstein1-1/+1
An ino is unsigned, so display it as such in /proc/locks. Cc: [email protected] Signed-off-by: Amir Goldstein <[email protected]> Signed-off-by: Jeff Layton <[email protected]>
2019-12-29ALSA: ice1724: Fix sleep-in-atomic in Infrasonic Quartet support codeTakashi Iwai1-3/+6
Jia-Ju Bai reported a possible sleep-in-atomic scenario in the ice1724 driver with Infrasonic Quartet support code: namely, ice->set_rate callback gets called inside ice->reg_lock spinlock, while the callback in quartet.c holds ice->gpio_mutex. This patch fixes the invalid call: it simply moves the calls of ice->set_rate and ice->set_mclk callbacks outside the spinlock. Reported-by: Jia-Ju Bai <[email protected]> Cc: <[email protected]> Link: https://lore.kernel.org/r/[email protected] Link: https://lore.kernel.org/r/[email protected] Signed-off-by: Takashi Iwai <[email protected]>
2019-12-29drm/amdgpu: enable gfxoff for raven1 refreshchangzhu1-11/+4
When smu version is larger than 0x41e2b, it will load raven_kicker_rlc.bin.To enable gfxoff for raven_kicker_rlc.bin,it needs to avoid adev->pm.pp_feature &= ~PP_GFXOFF_MASK when it loads raven_kicker_rlc.bin. Signed-off-by: changzhu <[email protected]> Reviewed-by: Huang Rui <[email protected]> Acked-by: Alex Deucher <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-29drm/amdgpu/smu: add metrics table lock for vega20 (v2)Alex Deucher1-0/+3
To protect access to the metrics table. v2: unlock on error Bug: https://gitlab.freedesktop.org/drm/amd/issues/900 Reviewed-by: Kevin Wang <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2019-12-29drm/amdgpu/smu: add metrics table lock for navi (v2)Alex Deucher1-0/+3
To protect access to the metrics table. v2: unlock on error Bug: https://gitlab.freedesktop.org/drm/amd/issues/900 Reviewed-by: Kevin Wang <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2019-12-29drm/amdgpu/smu: add metrics table lock for arcturus (v2)Alex Deucher1-0/+3
To protect access to the metrics table. v2: unlock on error Bug: https://gitlab.freedesktop.org/drm/amd/issues/900 Reviewed-by: Kevin Wang <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2019-12-29drm/amdgpu/smu: add metrics table lockAlex Deucher2-0/+2
This table is used for lots of things, add it's own lock. Bug: https://gitlab.freedesktop.org/drm/amd/issues/900 Reviewed-by: Kevin Wang <[email protected]> Reviewed-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]> Cc: [email protected]
2019-12-29Revert "drm/amdgpu: simplify ATPX detection"Alex Deucher1-1/+11
This reverts commit f5fda6d89afe6e9cedaa1c3303903c905262f6e8. You can't use BASE_CLASS in pci_get_class. Bug: https://gitlab.freedesktop.org/drm/amd/issues/995 Acked-by: Evan Quan <[email protected]> Signed-off-by: Alex Deucher <[email protected]>
2019-12-28ARC: pt_regs: remove hardcoded registers offsetEugeniy Paltsev2-4/+13
Replace hardcoded registers offset numbers by calculated via offsetof. Signed-off-by: Eugeniy Paltsev <[email protected]> Signed-off-by: Vineet Gupta <[email protected]>
2019-12-28block: add bio_truncate to fix guard_bio_eodMing Lei3-24/+41
Some filesystem, such as vfat, may send bio which crosses device boundary, and the worse thing is that the IO request starting within device boundaries can contain more than one segment past EOD. Commit dce30ca9e3b6 ("fs: fix guard_bio_eod to check for real EOD errors") tries to fix this issue by returning -EIO for this situation. However, this way lets fs user code lose chance to handle -EIO, then sync_inodes_sb() may hang for ever. Also the current truncating on last segment is dangerous by updating the last bvec, given bvec table becomes not immutable any more, and fs bio users may not retrieve the truncated pages via bio_for_each_segment_all() in its .end_io callback. Fixes this issue by supporting multi-segment truncating. And the approach is simpler: - just update bio size since block layer can make correct bvec with the updated bio size. Then bvec table becomes really immutable. - zero all truncated segments for read bio Cc: Carlos Maiolino <[email protected]> Cc: [email protected] Fixed-by: dce30ca9e3b6 ("fs: fix guard_bio_eod to check for real EOD errors") Reported-by: [email protected] Signed-off-by: Ming Lei <[email protected]> Signed-off-by: Jens Axboe <[email protected]>
2019-12-27riscv: export flush_icache_all to modulesOlof Johansson1-0/+1
This is needed by LKDTM (crash dump test module), it calls flush_icache_range(), which on RISC-V turns into flush_icache_all(). On other architectures, the actual implementation is exported, so follow that precedence and export it here too. Fixes build of CONFIG_LKDTM that fails with: ERROR: "flush_icache_all" [drivers/misc/lkdtm/lkdtm.ko] undefined! Signed-off-by: Olof Johansson <[email protected]> Signed-off-by: Paul Walmsley <[email protected]>
2019-12-27riscv: reject invalid syscalls below -1David Abdurachmanov1-0/+1
Running "stress-ng --enosys 4 -t 20 -v" showed a large number of kernel oops with "Unable to handle kernel paging request at virtual address" message. This happens when enosys stressor starts testing random non-valid syscalls. I forgot to redirect any syscall below -1 to sys_ni_syscall. With the patch kernel oops messages are gone while running stress-ng enosys stressor. Signed-off-by: David Abdurachmanov <[email protected]> Fixes: 5340627e3fe0 ("riscv: add support for SECCOMP and SECCOMP_FILTER") Signed-off-by: Paul Walmsley <[email protected]>
Powered by cgit, Gruvboxed by Blaster4385.