| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
While examining is_ucounts_overlimit and reading the various messages
I realized that is_ucounts_overlimit fails to deal with counts that
may have wrapped.
Being wrapped should be a transitory state for counts and they should
never be wrapped for long, but it can happen so handle it.
Cc: [email protected]
Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts")
Link: https://lkml.kernel.org/r/[email protected]
Reviewed-by: Shuah Khan <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
|
|
During set*id() which cred->ucounts to charge the the current process
to is not known until after set_cred_ucounts. So move the
RLIMIT_NPROC checking into a new helper flag_nproc_exceeded and call
flag_nproc_exceeded after set_cred_ucounts.
This is very much an arbitrary subset of the places where we currently
change the RLIMIT_NPROC accounting, designed to preserve the existing
logic.
Fixing the existing logic will be the subject of another series of
changes.
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts")
Signed-off-by: "Eric W. Biederman" <[email protected]>
|
|
Michal Koutný <[email protected]> wrote:
> Tasks are associated to multiple users at once. Historically and as per
> setrlimit(2) RLIMIT_NPROC is enforce based on real user ID.
>
> The commit 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts")
> made the accounting structure "indexed" by euid and hence potentially
> account tasks differently.
>
> The effective user ID may be different e.g. for setuid programs but
> those are exec'd into already existing task (i.e. below limit), so
> different accounting is moot.
>
> Some special setresuid(2) users may notice the difference, justifying
> this fix.
I looked at cred->ucount and it is only used for rlimit operations
that were previously stored in cred->user. Making the fact
cred->ucount can refer to a different user from cred->user a bug,
affecting all uses of cred->ulimit not just RLIMIT_NPROC.
Fix set_cred_ucounts to always use the real uid not the effective uid.
Further simplify set_cred_ucounts by noticing that set_cred_ucounts
somehow retained a draft version of the check to see if alloc_ucounts
was needed that checks the new->user and new->user_ns against the
current_real_cred(). Remove that draft version of the check.
All that matters for setting the cred->ucounts are the user_ns and uid
fields in the cred.
Cc: [email protected]
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Reported-by: Michal Koutný <[email protected]>
Reviewed-by: Michal Koutný <[email protected]>
Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts")
Signed-off-by: "Eric W. Biederman" <[email protected]>
|
|
Michal Koutný <[email protected]> wrote:
> It was reported that v5.14 behaves differently when enforcing
> RLIMIT_NPROC limit, namely, it allows one more task than previously.
> This is consequence of the commit 21d1c5e386bc ("Reimplement
> RLIMIT_NPROC on top of ucounts") that missed the sharpness of
> equality in the forking path.
This can be fixed either by fixing the test or by moving the increment
to be before the test. Fix it my moving copy_creds which contains
the increment before is_ucounts_overlimit.
In the case of CLONE_NEWUSER the ucounts in the task_cred changes.
The function is_ucounts_overlimit needs to use the final version of
the ucounts for the new process. Which means moving the
is_ucounts_overlimit test after copy_creds is necessary.
Both the test in fork and the test in set_user were semantically
changed when the code moved to ucounts. The change of the test in
fork was bad because it was before the increment. The test in
set_user was wrong and the change to ucounts fixed it. So this
fix only restores the old behavior in one lcation not two.
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Cc: [email protected]
Reported-by: Michal Koutný <[email protected]>
Reviewed-by: Michal Koutný <[email protected]>
Fixes: 21d1c5e386bc ("Reimplement RLIMIT_NPROC on top of ucounts")
Signed-off-by: "Eric W. Biederman" <[email protected]>
|
|
set_user
Solar Designer <[email protected]> wrote:
> I'm not aware of anyone actually running into this issue and reporting
> it. The systems that I personally know use suexec along with rlimits
> still run older/distro kernels, so would not yet be affected.
>
> So my mention was based on my understanding of how suexec works, and
> code review. Specifically, Apache httpd has the setting RLimitNPROC,
> which makes it set RLIMIT_NPROC:
>
> https://httpd.apache.org/docs/2.4/mod/core.html#rlimitnproc
>
> The above documentation for it includes:
>
> "This applies to processes forked from Apache httpd children servicing
> requests, not the Apache httpd children themselves. This includes CGI
> scripts and SSI exec commands, but not any processes forked from the
> Apache httpd parent, such as piped logs."
>
> In code, there are:
>
> ./modules/generators/mod_cgid.c: ( (cgid_req.limits.limit_nproc_set) && ((rc = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC,
> ./modules/generators/mod_cgi.c: ((rc = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC,
> ./modules/filters/mod_ext_filter.c: rv = apr_procattr_limit_set(procattr, APR_LIMIT_NPROC, conf->limit_nproc);
>
> For example, in mod_cgi.c this is in run_cgi_child().
>
> I think this means an httpd child sets RLIMIT_NPROC shortly before it
> execs suexec, which is a SUID root program. suexec then switches to the
> target user and execs the CGI script.
>
> Before 2863643fb8b9, the setuid() in suexec would set the flag, and the
> target user's process count would be checked against RLIMIT_NPROC on
> execve(). After 2863643fb8b9, the setuid() in suexec wouldn't set the
> flag because setuid() is (naturally) called when the process is still
> running as root (thus, has those limits bypass capabilities), and
> accordingly execve() would not check the target user's process count
> against RLIMIT_NPROC.
In commit 2863643fb8b9 ("set_user: add capability check when
rlimit(RLIMIT_NPROC) exceeds") capable calls were added to set_user to
make it more consistent with fork. Unfortunately because of call site
differences those capable calls were checking the credentials of the
user before set*id() instead of after set*id().
This breaks enforcement of RLIMIT_NPROC for applications that set the
rlimit and then call set*id() while holding a full set of
capabilities. The capabilities are only changed in the new credential
in security_task_fix_setuid().
The code in apache suexec appears to follow this pattern.
Commit 909cc4ae86f3 ("[PATCH] Fix two bugs with process limits
(RLIMIT_NPROC)") where this check was added describes the targes of this
capability check as:
2/ When a root-owned process (e.g. cgiwrap) sets up process limits and then
calls setuid, the setuid should fail if the user would then be running
more than rlim_cur[RLIMIT_NPROC] processes, but it doesn't. This patch
adds an appropriate test. With this patch, and per-user process limit
imposed in cgiwrap really works.
So the original use case of this check also appears to match the broken
pattern.
Restore the enforcement of RLIMIT_NPROC by removing the bad capable
checks added in set_user. This unfortunately restores the
inconsistent state the code has been in for the last 11 years, but
dealing with the inconsistencies looks like a larger problem.
Cc: [email protected]
Link: https://lore.kernel.org/all/[email protected]/
Link: https://lkml.kernel.org/r/[email protected]
Link: https://lkml.kernel.org/r/[email protected]
Fixes: 2863643fb8b9 ("set_user: add capability check when rlimit(RLIMIT_NPROC) exceeds")
History-Tree: https://git.kernel.org/pub/scm/linux/kernel/git/tglx/history.git
Reviewed-by: Solar Designer <[email protected]>
Signed-off-by: "Eric W. Biederman" <[email protected]>
|
|
When 'ping' changes to use PING socket instead of RAW socket by:
# sysctl -w net.ipv4.ping_group_range="0 100"
There is another regression caused when matching sk_bound_dev_if
and dif, RAW socket is using inet_iif() while PING socket lookup
is using skb->dev->ifindex, the cmd below fails due to this:
# ip link add dummy0 type dummy
# ip link set dummy0 up
# ip addr add 192.168.111.1/24 dev dummy0
# ping -I dummy0 192.168.111.1 -c1
The issue was also reported on:
https://github.com/iputils/iputils/issues/104
But fixed in iputils in a wrong way by not binding to device when
destination IP is on device, and it will cause some of kselftests
to fail, as Jianlin noticed.
This patch is to use inet(6)_iif and inet(6)_sdif to get dif and
sdif for PING socket, and keep consistent with RAW socket.
Fixes: c319b4d76b9e ("net: ipv4: add IPPROTO_ICMP socket kind")
Reported-by: Jianlin Shi <[email protected]>
Signed-off-by: Xin Long <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Now that we disable wbt by set WBT_STATE_OFF_DEFAULT in
wbt_disable_default() when switch elevator to bfq. And when
we remove scsi device, wbt will be enabled by wbt_enable_default.
If it become false positive between wbt_wait() and wbt_track()
when submit write request.
The following is the scenario that triggered the problem.
T1 T2 T3
elevator_switch_mq
bfq_init_queue
wbt_disable_default <= Set
rwb->enable_state (OFF)
Submit_bio
blk_mq_make_request
rq_qos_throttle
<= rwb->enable_state (OFF)
scsi_remove_device
sd_remove
del_gendisk
blk_unregister_queue
elv_unregister_queue
wbt_enable_default
<= Set rwb->enable_state (ON)
q_qos_track
<= rwb->enable_state (ON)
^^^^^^ this request will mark WBT_TRACKED without inflight add and will
lead to drop rqw->inflight to -1 in wbt_done() which will trigger IO hung.
Fix this by move wbt_enable_default() from elv_unregister to
bfq_exit_queue(). Only re-enable wbt when bfq exit.
Fixes: 76a8040817b4b ("blk-wbt: make sure throttle is enabled properly")
Remove oneline stale comment, and kill one oneshot local variable.
Signed-off-by: Ming Lei <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/linux-block/[email protected]/
Signed-off-by: Laibin Qiu <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Various block drivers call blk_set_queue_dying to mark a disk as dead due
to surprise removal events, but since commit 8e141f9eb803 that doesn't
work given that the GD_DEAD flag needs to be set to stop I/O.
Replace the driver calls to blk_set_queue_dying with a new (and properly
documented) blk_mark_disk_dead API, and fold blk_set_queue_dying into the
only remaining caller.
Fixes: 8e141f9eb803 ("block: drain file system I/O on del_gendisk")
Reported-by: Markus Blöchl <[email protected]>
Signed-off-by: Christoph Hellwig <[email protected]>
Reviewed-by: Sagi Grimberg <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Add __GFP_ZERO flag for alloc_page in function bio_copy_kern to initialize
the buffer of a bio.
Signed-off-by: Haimin Zhang <[email protected]>
Reviewed-by: Chaitanya Kulkarni <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jens Axboe <[email protected]>
|
|
Add quirk CDC_MBIM_FLAG_AVOID_ALTSETTING_TOGGLE for Telit FN990
0x1071 composition in order to avoid bind error.
Signed-off-by: Daniele Palmas <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
This was detected by the gcc in Fedora Rawhide's gcc:
50 11.01 fedora:rawhide : FAIL gcc version 12.0.1 20220205 (Red Hat 12.0.1-0) (GCC)
inlined from 'bpf__config_obj' at util/bpf-loader.c:1242:9:
util/bpf-loader.c:1225:34: error: pointer 'map_opt' may be used after 'free' [-Werror=use-after-free]
1225 | *key_scan_pos += strlen(map_opt);
| ^~~~~~~~~~~~~~~
util/bpf-loader.c:1223:9: note: call to 'free' here
1223 | free(map_name);
| ^~~~~~~~~~~~~~
cc1: all warnings being treated as errors
So do the calculations on the pointer before freeing it.
Fixes: 04f9bf2bac72480c ("perf bpf-loader: Add missing '*' for key_scan_pos")
Cc: Adrian Hunter <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Wang ShaoBo <[email protected]>
Link: https://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
https://gitlab.freedesktop.org/agd5f/linux into drm-fixes
amd-drm-fixes-5.17-2022-02-16:
amdgpu:
- Stable pstate clock fixes for Dimgrey Cavefish and Beige Goby
- S0ix SDMA fix
- Yellow Carp GPU reset fix
radeon:
- Backlight fix for iMac 12,1
Signed-off-by: Dave Airlie <[email protected]>
From: Alex Deucher <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
The recent code refactoring to use the standard DMA helper requires
the max DMA segment size setup for SG list management. Without it,
the kernel may spew warnings when a large buffer is allocated.
This patch sets up dma_set_max_seg_size() for avoiding spurious
warnings.
Fixes: 2c95b92ecd92 ("ALSA: memalloc: Unify x86 SG-buffer handling (take#3)")
Acked-by: Cezary Rojewski <[email protected]>
Acked-by: Mark Brown <[email protected]>
Cc: <[email protected]>
BugLink: https://github.com/thesofproject/linux/issues/3430
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The recent code refactoring to use the standard DMA helper requires
the max DMA segment size setup for SG list management. Without it,
the kernel may spew warnings when a large buffer is allocated.
This patch sets up dma_set_max_seg_size() for avoiding spurious
warnings.
Fixes: 2c95b92ecd92 ("ALSA: memalloc: Unify x86 SG-buffer handling (take#3)")
Acked-by: Mark Brown <[email protected]>
Cc: <[email protected]>
BugLink: https://github.com/thesofproject/linux/issues/3430
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
The recent code refactoring to use the standard DMA helper requires
the max DMA segment size setup for SG list management. Without it,
the kernel may spew warnings when a large buffer is allocated.
This patch sets up dma_set_max_seg_size() for avoiding spurious
warnings.
Fixes: 2c95b92ecd92 ("ALSA: memalloc: Unify x86 SG-buffer handling (take#3)")
Cc: <[email protected]>
BugLink: https://github.com/thesofproject/linux/issues/3430
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Takashi Iwai <[email protected]>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-fixes
Mediatek DRM Fixes for Linux 5.17
1. Avoid EPROBE_DEFER loop with external bridge
Signed-off-by: Dave Airlie <[email protected]>
From: Chun-Kuang Hu <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
We have been living dangerously, at the mercy of malicious users,
abusing TC_ACT_REPEAT, as shown by this syzpot report [1].
Add an arbitrary limit (32) to the number of times an action can
return TC_ACT_REPEAT.
v2: switch the limit to 32 instead of 10.
Use net_warn_ratelimited() instead of pr_err_once().
[1] (C repro available on demand)
rcu: INFO: rcu_preempt self-detected stall on CPU
rcu: 1-...!: (10500 ticks this GP) idle=021/1/0x4000000000000000 softirq=5592/5592 fqs=0
(t=10502 jiffies g=5305 q=190)
rcu: rcu_preempt kthread timer wakeup didn't happen for 10502 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402
rcu: Possible timer handling issue on cpu=0 timer-softirq=3527
rcu: rcu_preempt kthread starved for 10505 jiffies! g5305 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=0
rcu: Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
task:rcu_preempt state:I stack:29344 pid: 14 ppid: 2 flags:0x00004000
Call Trace:
<TASK>
context_switch kernel/sched/core.c:4986 [inline]
__schedule+0xab2/0x4db0 kernel/sched/core.c:6295
schedule+0xd2/0x260 kernel/sched/core.c:6368
schedule_timeout+0x14a/0x2a0 kernel/time/timer.c:1881
rcu_gp_fqs_loop+0x186/0x810 kernel/rcu/tree.c:1963
rcu_gp_kthread+0x1de/0x320 kernel/rcu/tree.c:2136
kthread+0x2e9/0x3a0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
rcu: Stack dump where RCU GP kthread last ran:
Sending NMI from CPU 1 to CPUs 0:
NMI backtrace for cpu 0
CPU: 0 PID: 3646 Comm: syz-executor358 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:rep_nop arch/x86/include/asm/vdso/processor.h:13 [inline]
RIP: 0010:cpu_relax arch/x86/include/asm/vdso/processor.h:18 [inline]
RIP: 0010:pv_wait_head_or_lock kernel/locking/qspinlock_paravirt.h:437 [inline]
RIP: 0010:__pv_queued_spin_lock_slowpath+0x3b8/0xb40 kernel/locking/qspinlock.c:508
Code: 48 89 eb c6 45 01 01 41 bc 00 80 00 00 48 c1 e9 03 83 e3 07 41 be 01 00 00 00 48 b8 00 00 00 00 00 fc ff df 4c 8d 2c 01 eb 0c <f3> 90 41 83 ec 01 0f 84 72 04 00 00 41 0f b6 45 00 38 d8 7f 08 84
RSP: 0018:ffffc9000283f1b0 EFLAGS: 00000206
RAX: 0000000000000003 RBX: 0000000000000000 RCX: 1ffff1100fc0071e
RDX: 0000000000000001 RSI: 0000000000000201 RDI: 0000000000000000
RBP: ffff88807e0038f0 R08: 0000000000000001 R09: ffffffff8ffbf9ff
R10: 0000000000000001 R11: 0000000000000001 R12: 0000000000004c1e
R13: ffffed100fc0071e R14: 0000000000000001 R15: ffff8880b9c3aa80
FS: 00005555562bf300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ffdbfef12b8 CR3: 00000000723c2000 CR4: 00000000003506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
pv_queued_spin_lock_slowpath arch/x86/include/asm/paravirt.h:591 [inline]
queued_spin_lock_slowpath arch/x86/include/asm/qspinlock.h:51 [inline]
queued_spin_lock include/asm-generic/qspinlock.h:85 [inline]
do_raw_spin_lock+0x200/0x2b0 kernel/locking/spinlock_debug.c:115
spin_lock_bh include/linux/spinlock.h:354 [inline]
sch_tree_lock include/net/sch_generic.h:610 [inline]
sch_tree_lock include/net/sch_generic.h:605 [inline]
prio_tune+0x3b9/0xb50 net/sched/sch_prio.c:211
prio_init+0x5c/0x80 net/sched/sch_prio.c:244
qdisc_create.constprop.0+0x44a/0x10f0 net/sched/sch_api.c:1253
tc_modify_qdisc+0x4c5/0x1980 net/sched/sch_api.c:1660
rtnetlink_rcv_msg+0x413/0xb80 net/core/rtnetlink.c:5594
netlink_rcv_skb+0x153/0x420 net/netlink/af_netlink.c:2494
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x539/0x7e0 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x904/0xe00 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg+0xcf/0x120 net/socket.c:725
____sys_sendmsg+0x6e8/0x810 net/socket.c:2413
___sys_sendmsg+0xf3/0x170 net/socket.c:2467
__sys_sendmsg+0xe5/0x1b0 net/socket.c:2496
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f7ee98aae99
Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 41 15 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 c0 ff ff ff f7 d8 64 89 01 48
RSP: 002b:00007ffdbfef12d8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007ffdbfef1300 RCX: 00007f7ee98aae99
RDX: 0000000000000000 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 0000000000000000 R08: 000000000000000d R09: 000000000000000d
R10: 000000000000000d R11: 0000000000000246 R12: 00007ffdbfef12f0
R13: 00000000000f4240 R14: 000000000004ca47 R15: 00007ffdbfef12e4
</TASK>
INFO: NMI handler (nmi_cpu_backtrace_handler) took too long to run: 2.293 msecs
NMI backtrace for cpu 1
CPU: 1 PID: 3260 Comm: kworker/1:3 Not tainted 5.17.0-rc3-syzkaller-00149-gbf8e59fd315f #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: mld mld_ifc_work
Call Trace:
<IRQ>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xcd/0x134 lib/dump_stack.c:106
nmi_cpu_backtrace.cold+0x47/0x144 lib/nmi_backtrace.c:111
nmi_trigger_cpumask_backtrace+0x1b3/0x230 lib/nmi_backtrace.c:62
trigger_single_cpu_backtrace include/linux/nmi.h:164 [inline]
rcu_dump_cpu_stacks+0x25e/0x3f0 kernel/rcu/tree_stall.h:343
print_cpu_stall kernel/rcu/tree_stall.h:604 [inline]
check_cpu_stall kernel/rcu/tree_stall.h:688 [inline]
rcu_pending kernel/rcu/tree.c:3919 [inline]
rcu_sched_clock_irq.cold+0x5c/0x759 kernel/rcu/tree.c:2617
update_process_times+0x16d/0x200 kernel/time/timer.c:1785
tick_sched_handle+0x9b/0x180 kernel/time/tick-sched.c:226
tick_sched_timer+0x1b0/0x2d0 kernel/time/tick-sched.c:1428
__run_hrtimer kernel/time/hrtimer.c:1685 [inline]
__hrtimer_run_queues+0x1c0/0xe50 kernel/time/hrtimer.c:1749
hrtimer_interrupt+0x31c/0x790 kernel/time/hrtimer.c:1811
local_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1086 [inline]
__sysvec_apic_timer_interrupt+0x146/0x530 arch/x86/kernel/apic/apic.c:1103
sysvec_apic_timer_interrupt+0x8e/0xc0 arch/x86/kernel/apic/apic.c:1097
</IRQ>
<TASK>
asm_sysvec_apic_timer_interrupt+0x12/0x20 arch/x86/include/asm/idtentry.h:638
RIP: 0010:__sanitizer_cov_trace_const_cmp4+0xc/0x70 kernel/kcov.c:286
Code: 00 00 00 48 89 7c 30 e8 48 89 4c 30 f0 4c 89 54 d8 20 48 89 10 5b c3 0f 1f 80 00 00 00 00 41 89 f8 bf 03 00 00 00 4c 8b 14 24 <89> f1 65 48 8b 34 25 00 70 02 00 e8 14 f9 ff ff 84 c0 74 4b 48 8b
RSP: 0018:ffffc90002c5eea8 EFLAGS: 00000246
RAX: 0000000000000007 RBX: ffff88801c625800 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000003
RBP: ffff8880137d3100 R08: 0000000000000000 R09: 0000000000000000
R10: ffffffff874fcd88 R11: 0000000000000000 R12: ffff88801d692dc0
R13: ffff8880137d3104 R14: 0000000000000000 R15: ffff88801d692de8
tcf_police_act+0x358/0x11d0 net/sched/act_police.c:256
tcf_action_exec net/sched/act_api.c:1049 [inline]
tcf_action_exec+0x1a6/0x530 net/sched/act_api.c:1026
tcf_exts_exec include/net/pkt_cls.h:326 [inline]
route4_classify+0xef0/0x1400 net/sched/cls_route.c:179
__tcf_classify net/sched/cls_api.c:1549 [inline]
tcf_classify+0x3e8/0x9d0 net/sched/cls_api.c:1615
prio_classify net/sched/sch_prio.c:42 [inline]
prio_enqueue+0x3a7/0x790 net/sched/sch_prio.c:75
dev_qdisc_enqueue+0x40/0x300 net/core/dev.c:3668
__dev_xmit_skb net/core/dev.c:3756 [inline]
__dev_queue_xmit+0x1f61/0x3660 net/core/dev.c:4081
neigh_hh_output include/net/neighbour.h:533 [inline]
neigh_output include/net/neighbour.h:547 [inline]
ip_finish_output2+0x14dc/0x2170 net/ipv4/ip_output.c:228
__ip_finish_output net/ipv4/ip_output.c:306 [inline]
__ip_finish_output+0x396/0x650 net/ipv4/ip_output.c:288
ip_finish_output+0x32/0x200 net/ipv4/ip_output.c:316
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip_output+0x196/0x310 net/ipv4/ip_output.c:430
dst_output include/net/dst.h:451 [inline]
ip_local_out+0xaf/0x1a0 net/ipv4/ip_output.c:126
iptunnel_xmit+0x628/0xa50 net/ipv4/ip_tunnel_core.c:82
geneve_xmit_skb drivers/net/geneve.c:966 [inline]
geneve_xmit+0x10c8/0x3530 drivers/net/geneve.c:1077
__netdev_start_xmit include/linux/netdevice.h:4683 [inline]
netdev_start_xmit include/linux/netdevice.h:4697 [inline]
xmit_one net/core/dev.c:3473 [inline]
dev_hard_start_xmit+0x1eb/0x920 net/core/dev.c:3489
__dev_queue_xmit+0x2985/0x3660 net/core/dev.c:4116
neigh_hh_output include/net/neighbour.h:533 [inline]
neigh_output include/net/neighbour.h:547 [inline]
ip6_finish_output2+0xf7a/0x14f0 net/ipv6/ip6_output.c:126
__ip6_finish_output net/ipv6/ip6_output.c:191 [inline]
__ip6_finish_output+0x61e/0xe90 net/ipv6/ip6_output.c:170
ip6_finish_output+0x32/0x200 net/ipv6/ip6_output.c:201
NF_HOOK_COND include/linux/netfilter.h:296 [inline]
ip6_output+0x1e4/0x530 net/ipv6/ip6_output.c:224
dst_output include/net/dst.h:451 [inline]
NF_HOOK include/linux/netfilter.h:307 [inline]
NF_HOOK include/linux/netfilter.h:301 [inline]
mld_sendpack+0x9a3/0xe40 net/ipv6/mcast.c:1826
mld_send_cr net/ipv6/mcast.c:2127 [inline]
mld_ifc_work+0x71c/0xdc0 net/ipv6/mcast.c:2659
process_one_work+0x9ac/0x1650 kernel/workqueue.c:2307
worker_thread+0x657/0x1110 kernel/workqueue.c:2454
kthread+0x2e9/0x3a0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:295
</TASK>
----------------
Code disassembly (best guess):
0: 48 89 eb mov %rbp,%rbx
3: c6 45 01 01 movb $0x1,0x1(%rbp)
7: 41 bc 00 80 00 00 mov $0x8000,%r12d
d: 48 c1 e9 03 shr $0x3,%rcx
11: 83 e3 07 and $0x7,%ebx
14: 41 be 01 00 00 00 mov $0x1,%r14d
1a: 48 b8 00 00 00 00 00 movabs $0xdffffc0000000000,%rax
21: fc ff df
24: 4c 8d 2c 01 lea (%rcx,%rax,1),%r13
28: eb 0c jmp 0x36
* 2a: f3 90 pause <-- trapping instruction
2c: 41 83 ec 01 sub $0x1,%r12d
30: 0f 84 72 04 00 00 je 0x4a8
36: 41 0f b6 45 00 movzbl 0x0(%r13),%eax
3b: 38 d8 cmp %bl,%al
3d: 7f 08 jg 0x47
3f: 84 .byte 0x84
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Acked-by: Jamal Hadi Salim <[email protected]>
Cc: Cong Wang <[email protected]>
Cc: Jiri Pirko <[email protected]>
Reported-by: syzbot <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
The previous bug fix had an unfortunate side effect that broke
distribution of binding table entries between nodes. The updated
tipc_sock_addr struct is also used further down in the same
function, and there the old value is still the correct one.
Fixes: 032062f363b4 ("tipc: fix wrong publisher node address in link publications")
Signed-off-by: Jon Maloy <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
of_node_put(priv->ds->slave_mii_bus->dev.of_node) should be
done before mdiobus_free(priv->ds->slave_mii_bus).
Signed-off-by: Alexey Khoroshilov <[email protected]>
Fixes: 0d120dfb5d67 ("net: dsa: lantiq_gswip: don't use devres for mdiobus")
Reviewed-by: Andrew Lunn <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
Ipv6 flowlabels historically require a reservation before use.
Optionally in exclusive mode (e.g., user-private).
Commit 59c820b2317f ("ipv6: elide flowlabel check if no exclusive
leases exist") introduced a fastpath that avoids this check when no
exclusive leases exist in the system, and thus any flowlabel use
will be granted.
That allows skipping the control operation to reserve a flowlabel
entirely. Though with a warning if the fast path fails:
This is an optimization. Robust applications still have to revert to
requesting leases if the fast path fails due to an exclusive lease.
Still, this is subtle. Better isolate network namespaces from each
other. Flowlabels are per-netns. Also record per-netns whether
exclusive leases are in use. Then behavior does not change based on
activity in other netns.
Changes
v2
- wrap in IS_ENABLED(CONFIG_IPV6) to avoid breakage if disabled
Fixes: 59c820b2317f ("ipv6: elide flowlabel check if no exclusive leases exist")
Link: https://lore.kernel.org/netdev/MWHPR2201MB1072BCCCFCE779E4094837ACD0329@MWHPR2201MB1072.namprd22.prod.outlook.com/
Reported-by: Congyu Liu <[email protected]>
Signed-off-by: Willem de Bruijn <[email protected]>
Tested-by: Congyu Liu <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
disabled
Whenever bridge driver hits the max capacity of MDBs, it disables
the MC processing (by setting corresponding bridge option), but never
notifies switchdev about such change (the notifiers are called only upon
explicit setting of this option, through the registered netlink interface).
This could lead to situation when Software MDB processing gets disabled,
but this event never gets offloaded to the underlying Hardware.
Fix this by adding a notify message in such case.
Fixes: 147c1e9b902c ("switchdev: bridge: Offload multicast disabled")
Signed-off-by: Oleksandr Mazur <[email protected]>
Acked-by: Nikolay Aleksandrov <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Jakub Kicinski <[email protected]>
|
|
When mounting with SMB2.1 or earlier, even with nomultichannel, we
log the confusing warning message:
"CIFS: VFS: multichannel is not supported on this protocol version, use 3.0 or above"
Fix this so that we don't log this unless they really are trying
to mount with multichannel.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=215608
Reported-by: Kim Scarborough <[email protected]>
Cc: [email protected] # 5.11+
Reviewed-by: Paulo Alcantara (SUSE) <[email protected]>
Signed-off-by: Steve French <[email protected]>
|
|
Sysfs support might be disabled so we need to guard the code that
instantiates "compression" attribute with an #ifdef.
Fixes: b1ae6dc41eaa ("module: add in-kernel support for decompressing")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Dmitry Torokhov <[email protected]>
Signed-off-by: Luis Chamberlain <[email protected]>
|
|
The result of the writeback, whether it is an ENOSPC or an EIO, or
anything else, does not inhibit the NFS client from reporting the
correct file timestamps.
Fixes: 79566ef018f5 ("NFS: Getattr doesn't require data sync semantics")
Signed-off-by: Trond Myklebust <[email protected]>
Signed-off-by: Anna Schumaker <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC fix from Ulf Hansson:
"Fix recovery logic for multi block I/O reads (MMC_READ_MULTIPLE_BLOCK)"
* tag 'mmc-v5.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: block: fix read single on recovery logic
|
|
Daniel Gibson reports that the n_tty code gets line termination wrong in
very specific cases:
"If you feed a line with exactly 64 chars + terminating newline, and
directly afterwards (without reading) another line into a pseudo
terminal, the the first read() on the other side will return the 64
char line *without* terminating newline, and the next read() will
return the missing terminating newline AND the complete next line (if
it fits in the buffer)"
and bisected the behavior to commit 3b830a9c34d5 ("tty: convert
tty_ldisc_ops 'read()' function to take a kernel pointer").
Now, digging deeper, it turns out that the behavior isn't exactly new:
what changed in commit 3b830a9c34d5 was that the tty line discipline
.read() function is now passed an intermediate kernel buffer rather than
the final user space buffer.
And that intermediate kernel buffer is 64 bytes in size - thus that
special case with exactly 64 bytes plus terminating newline.
The same problem did exist before, but historically the boundary was not
the 64-byte chunk, but the user-supplied buffer size, which is obviously
generally bigger (and potentially bigger than N_TTY_BUF_SIZE, which
would hide the issue entirely).
The reason is that the n_tty canon_copy_from_read_buf() code would look
ahead for the EOL character one byte further than it would actually
copy. It would then decide that it had found the terminator, and unmark
it as an EOL character - which in turn explains why the next read
wouldn't then be terminated by it.
Now, the reason it did all this in the first place is related to some
historical and pretty obscure EOF behavior, see commit ac8f3bf8832a
("n_tty: Fix poll() after buffer-limited eof push read") and commit
40d5e0905a03 ("n_tty: Fix EOF push handling").
And the reason for the EOL confusion is that we treat EOF as a special
EOL condition, with the EOL character being NUL (aka "__DISABLED_CHAR"
in the kernel sources).
So that EOF look-ahead also affects the normal EOL handling.
This patch just removes the look-ahead that causes problems, because EOL
is much more critical than the historical "EOF in the middle of a line
that coincides with the end of the buffer" handling ever was.
Now, it is possible that we should indeed re-introduce the "look at next
character to see if it's a EOF" behavior, but if so, that should be done
not at the kernel buffer chunk boundary in canon_copy_from_read_buf(),
but at a higher level, when we run out of the user buffer.
In particular, the place to do that would be at the top of
'n_tty_read()', where we check if it's a continuation of a previously
started read, and there is no more buffer space left, we could decide to
just eat the __DISABLED_CHAR at that point.
But that would be a separate patch, because I suspect nobody actually
cares, and I'd like to get a report about it before bothering.
Fixes: 3b830a9c34d5 ("tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer")
Fixes: ac8f3bf8832a ("n_tty: Fix poll() after buffer-limited eof push read")
Fixes: 40d5e0905a03 ("n_tty: Fix EOF push handling")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=215611
Reported-and-tested-by: Daniel Gibson <[email protected]>
Cc: Peter Hurley <[email protected]>
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Jiri Slaby <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
|
|
Add and ACPI idle power level limit for 32-bit ThinkPad T40.
There is a regression on T40 introduced by commit d6b88ce2, starting
with kernel 5.16:
commit d6b88ce2eb9d2698eb24451eb92c0a1649b17bb1
Author: Richard Gong <[email protected]>
Date: Wed Sep 22 08:31:16 2021 -0500
ACPI: processor idle: Allow playing dead in C3 state
The above patch is trying to enter C3 state during init, what is causing
a T40 system freeze. I have not found a similar issue on any other of my
32-bit machines.
The fix is to add another exception to the processor_power_dmi_table[] list.
As a result the dmesg shows as expected:
[2.155398] ACPI: IBM ThinkPad T40 detected - limiting to C2 max_cstate. Override with "processor.max_cstate=9"
[2.155404] ACPI: processor limited to max C-state 2
The fix is trivial and affects only vintage T40 systems.
Fixes: d6b88ce2eb9d ("CPI: processor idle: Allow playing dead in C3 state")
Signed-off-by: Woody Suwalski <[email protected]>
Reviewed-by: Hans de Goede <[email protected]>
Cc: 5.16+ <[email protected]> # 5.16+
[ rjw: New subject ]
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
The struct perf_event_attr is initialised differently in Arm64 when
recording in call-graph fp mode, so update the relevant tests, and add
two extra arm64-only tests.
Before:
$ perf test 17 -v
17: Setup struct perf_event_attr
[...]
running './tests/attr/test-record-graph-default'
expected sample_type=295, got 4391
expected sample_regs_user=0, got 1073741824
FAILED './tests/attr/test-record-graph-default' - match failure
test child finished with -1
---- end ----
After:
[...]
running './tests/attr/test-record-graph-default-aarch64'
test limitation 'aarch64'
running './tests/attr/test-record-graph-fp-aarch64'
test limitation 'aarch64'
running './tests/attr/test-record-graph-default'
test limitation '!aarch64'
excluded architecture list ['aarch64']
skipped [aarch64] './tests/attr/test-record-graph-default'
running './tests/attr/test-record-graph-fp'
test limitation '!aarch64'
excluded architecture list ['aarch64']
skipped [aarch64] './tests/attr/test-record-graph-fp'
[...]
Fixes: 7248e308a5758761 ("perf tools: Record ARM64 LR register automatically")
Signed-off-by: German Gomez <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Alexandre Truong <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: James Clark <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Fastabend <[email protected]>
Cc: KP Singh <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Martin KaFai Lau <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Song Liu <[email protected]>
Cc: Yonghong Song <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
GCC 12 correctly reports a potential use-after-free condition in the
xrealloc helper. Fix the warning by avoiding an implicit "free(ptr)"
when size == 0:
In file included from help.c:12:
In function 'xrealloc',
inlined from 'add_cmdname' at help.c:24:2: subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free]
56 | ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free]
58 | ret = realloc(ptr, 1);
| ^~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
Fixes: 2f4ce5ec1d447beb ("perf tools: Finalize subcmd independence")
Reported-by: Valdis Klētnieks <[email protected]>
Signed-off-by: Kees Kook <[email protected]>
Tested-by: Valdis Klētnieks <[email protected]>
Tested-by: Justin M. Forbes <[email protected]>
Acked-by: Josh Poimboeuf <[email protected]>
Cc: [email protected]
Cc: Valdis Klētnieks <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Tzvetomir Stoyanov reported an issue with using macro
perf_cpu_map__for_each_cpu using private perf_cpu object.
The issue is caused by recent change that wrapped cpu in struct perf_cpu
to distinguish it from cpu indexes. We need to make struct perf_cpu
public.
Add a simple test for using the perf_cpu_map__for_each_cpu macro.
Fixes: 6d18804b963b78dc ("perf cpumap: Give CPUs their own type")
Reported-by: Tzvetomir Stoyanov (VMware) <[email protected]>
Signed-off-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ian Rogers <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: http://lore.kernel.org/lkml/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
'perf inject' with Coresight data generates files that cannot be opened
when only the last branch option is specified:
perf inject -i perf.data --itrace=l -o inject.data
perf script -i inject.data
0x33faa8 [0x8]: failed to process type: 9 [Bad address]
This is because cs_etm__synth_instruction_sample() is called even when
the sample type for instructions hasn't been setup. Last branch records
are attached to instruction samples so it doesn't make sense to generate
them when --itrace=i isn't specified anyway.
This change disables all calls of cs_etm__synth_instruction_sample()
unless --itrace=i is specified, resulting in a file with no samples if
only --itrace=l is provided, rather than a bad file.
Reviewed-by: Leo Yan <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
sample_branches and sample_instructions are already saved in the
synth_opts struct. Other usages like synth_opts.last_branch don't save a
value, so make this more consistent by always going through synth_opts
and not saving duplicate values.
Reviewed-by: Leo Yan <[email protected]>
Signed-off-by: James Clark <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: John Garry <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Mathieu Poirier <[email protected]>
Cc: Mike Leach <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Will Deacon <[email protected]>
Cc: [email protected]
Cc: [email protected]
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Commit a7f3713f6bf207e6 ("libperf tests: Add test_stat_multiplexing test")
added printf's of 64-bit ints using %lu which doesn't work on 32-bit
builds:
tests/test-evlist.c:529:29: error: format ‘%lu’ expects argument of type \
‘long unsigned int’, but argument 4 has type ‘uint64_t’ {aka ‘long long unsigned int’} [-Werror=format=]
Use PRIu64 instead which works on both 32-bit and 64-bit systems.
Fixes: a7f3713f6bf207e6 ("libperf tests: Add test_stat_multiplexing test")
Signed-off-by: Rob Herring <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Shunsuke Nakamura <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
To pick the trivial change in:
ddecd22878601a60 ("perf: uapi: Document perf_event_attr::sig_data truncation on 32 bit architectures")
Just adds a comment.
This silences this perf build warning:
Warning: Kernel ABI header at 'tools/include/uapi/linux/perf_event.h' differs from latest version at 'include/uapi/linux/perf_event.h'
diff -u tools/include/uapi/linux/perf_event.h include/uapi/linux/perf_event.h
Cc: Marco Elver <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
The function trace__symbols_init() runs "perf-read-vdso32" and that ends up
with a SIGCHLD delivered to 'perf'. And this SIGCHLD make perf exit early.
'perf trace' should exit only if the SIGCHLD is from our workload process.
So let's use sigaction() instead of signal() to match such condition.
Committer notes:
Use memset to zero the 'struct sigaction' variable as the '= { 0 }'
method isn't accepted in many compiler versions, e.g.:
4 34.02 alpine:3.6 : FAIL clang version 4.0.0 (tags/RELEASE_400/final)
builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
struct sigaction sigchld_act = { 0 };
^
{}
builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers]
struct sigaction sigchld_act = { 0 };
^
2 errors generated.
6 32.60 alpine:3.8 : FAIL gcc version 6.4.0 (Alpine 6.4.0)
builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
struct sigaction sigchld_act = { 0 };
^
{}
builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers]
struct sigaction sigchld_act = { 0 };
^
2 errors generated.
7 34.82 alpine:3.9 : FAIL gcc version 8.3.0 (Alpine 8.3.0)
builtin-trace.c:4897:35: error: suggest braces around initialization of subobject [-Werror,-Wmissing-braces]
struct sigaction sigchld_act = { 0 };
^
{}
builtin-trace.c:4897:37: error: missing field 'sa_mask' initializer [-Werror,-Wmissing-field-initializers]
struct sigaction sigchld_act = { 0 };
^
2 errors generated.
Signed-off-by: Changbin Du <[email protected]>
Acked-by: Jiri Olsa <[email protected]>
Cc: Alexander Shishkin <[email protected]>
Cc: Ingo Molnar <[email protected]>
Cc: Jiri Olsa <[email protected]>
Cc: Mark Rutland <[email protected]>
Cc: Namhyung Kim <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnaldo Carvalho de Melo <[email protected]>
|
|
Make sure we don't assign an error pointer to crtc_state->mode_blob
as that will break all kinds of places that assume either NULL or a
valid pointer (eg. drm_property_blob_put()).
Cc: [email protected]
Reported-by: fuyufan <[email protected]>
Signed-off-by: Ville Syrjälä <[email protected]>
Link: https://patchwork.freedesktop.org/patch/msgid/[email protected]
Acked-by: Maxime Ripard <[email protected]>
|
|
This driver works just fine with the BT404 version of the touchscreen
as well. Tested on the Samsung GT-I8160 (Codina) mobile phone.
Add all the new variants from the binding document so people can
easily test them, we believe most of them work more or less.
Signed-off-by: Linus Walleij <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Dmitry Torokhov <[email protected]>
|
|
Pull kvm fixes from Paolo Bonzini:
"ARM:
- Read HW interrupt pending state from the HW
x86:
- Don't truncate the performance event mask on AMD
- Fix Xen runstate updates to be atomic when preempting vCPU
- Fix for AMD AVIC interrupt injection race
- Several other AMD fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: x86/pmu: Use AMD64_RAW_EVENT_MASK for PERF_TYPE_RAW
KVM: x86/pmu: Don't truncate the PerfEvtSeln MSR when creating a perf event
KVM: SVM: fix race between interrupt delivery and AVIC inhibition
KVM: SVM: set IRR in svm_deliver_interrupt
KVM: SVM: extract avic_ring_doorbell
selftests: kvm: Remove absent target file
KVM: arm64: vgic: Read HW interrupt pending state from the HW
KVM: x86/xen: Fix runstate updates to be atomic when preempting vCPU
KVM: x86: SVM: move avic definitions from AMD's spec to svm.h
KVM: x86: lapic: don't touch irr_pending in kvm_apic_update_apicv when inhibiting it
KVM: x86: nSVM: deal with L1 hypervisor that intercepts interrupts but lets L2 control them
KVM: x86: nSVM: expose clean bit support to the guest
KVM: x86: nSVM/nVMX: set nested_run_pending on VM entry which is a result of RSM
KVM: x86: nSVM: mark vmcb01 as dirty when restoring SMM saved state
KVM: x86: nSVM: fix potential NULL derefernce on nested migration
KVM: x86: SVM: don't passthrough SMAP/SMEP/PKE bits in !NPT && !gCR0.PG case
Revert "svm: Add warning message for AVIC IPI invalid target"
|
|
Paul reports that the ACPI core complains on every boot about a missing
CEDT table. Unlike the standard NUMA tables (SRAT, MADT, and SLIT) that
are critical to NUMA init, CEDT is only expected on CXL platforms. Given
the notice is not actionable lower its severity to debug.
Link: https://lore.kernel.org/r/[email protected]
Fixes: fd49f99c1809 ("ACPI: NUMA: Add a node and memblk for each CFMWS not in SRAT")
Reported-by: Paul Menzel <[email protected]>
Signed-off-by: Dan Williams <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID fixes from Jiri Kosina:
- memory leak fix for hid-elo driver (Dongliang Mu)
- fix for hangs on newer AMD platforms with amd_sfh-driven hardware
(Basavaraj Natikar )
- locking fix in i2c-hid (Daniel Thompson)
- a few device-ID specific quirks
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid:
HID: amd_sfh: Add interrupt handler to process interrupts
HID: amd_sfh: Add functionality to clear interrupts
HID: amd_sfh: Disable the interrupt for all command
HID: amd_sfh: Correct the structure field name
HID: amd_sfh: Handle amd_sfh work buffer in PM ops
HID:Add support for UGTABLET WP5540
HID: amd_sfh: Add illuminance mask to limit ALS max value
HID: amd_sfh: Increase sensor command timeout
HID: i2c-hid: goodix: Fix a lockdep splat
HID: elo: fix memory leak in elo_probe
HID: apple: Set the tilde quirk flag on the Wellspring 5 and later
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
- yield CPU more often when defragmenting a large file
- skip defragmenting extents already under writeback
- improve error message when send fails to write file data
- get rid of warning when mounted with 'flushoncommit'
* tag 'for-5.17-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: send: in case of IO error log it
btrfs: get rid of warning on transaction commit when using flushoncommit
btrfs: defrag: don't try to defrag extents which are under writeback
btrfs: don't hold CPU for too long when defragging a file
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture fixes from Helge Deller:
- Fix miscompilations when function calls are made from inside a
put_user() call
- Drop __init from map_pages() declaration to avoid random boot crashes
- Added #error messages if a 64-bit compiler was used to build a 32-bit
kernel (and vice versa)
- Fix out-of-bound data TLB miss faults in sba_iommu and ccio-dma
drivers
- Add ioread64_lo_hi() and iowrite64_lo_hi() functions to avoid kernel
test robot errors
- Fix link failure when 8250_gsc driver is built without CONFIG_IOSAPIC
* tag 'for-5.17/parisc-3' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
serial: parisc: GSC: fix build when IOSAPIC is not set
parisc: Fix some apparent put_user() failures
parisc: Show error if wrong 32/64-bit compiler is being used
parisc: Add ioread64_lo_hi() and iowrite64_lo_hi()
parisc: Fix sglist access in ccio-dma.c
parisc: Fix data TLB miss in sba_unmap_sg
parisc: Drop __init from map_pages declaration
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux
Pull hyperv fixes from Wei Liu:
- Rework use of DMA_BIT_MASK in vmbus to work around a clang bug
(Michael Kelley)
- Fix NUMA topology (Long Li)
- Fix a memory leak in vmbus (Miaoqian Lin)
- One minor clean-up patch (Cai Huoqing)
* tag 'hyperv-fixes-signed-20220215' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux:
Drivers: hv: utils: Make use of the helper macro LIST_HEAD()
Drivers: hv: vmbus: Rework use of DMA_BIT_MASK(64)
Drivers: hv: vmbus: Fix memory leak in vmbus_add_channel_kobj
PCI: hv: Fix NUMA node assignment when kernel boots with custom NUMA topology
|
|
A broken device may give an extreme offset like 0xFFF0
and a reasonable length for a fragment. In the sanity
check as formulated now, this will create an integer
overflow, defeating the sanity check. Both offset
and offset + len need to be checked in such a manner
that no overflow can occur.
And those quantities should be unsigned.
Signed-off-by: Oliver Neukum <[email protected]>
Reviewed-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Do alignment logic properly and use the "ptr" local variable for
calculating the remainder of the alignment.
This became an issue because struct edac_mc_layer has a size that is not
zero modulo eight, and the next offset that was prepared for the private
data was unaligned, causing an alignment exception.
The patch in Fixes: which broke this actually wanted to "what we
actually care about is the alignment of the actual pointer that's about
to be returned." But it didn't check that alignment.
Use the correct variable "ptr" for that.
[ bp: Massage commit message. ]
Fixes: 8447c4d15e35 ("edac: Do alignment logic properly in edac_align_ptr()")
Signed-off-by: Eliav Farber <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
|
|
Clang static analysis reports this problem
route.c:425:4: warning: Use of memory after it is freed
trace_mctp_key_acquire(key);
^~~~~~~~~~~~~~~~~~~~~~~~~~~
When mctp_key_add() fails, key is freed but then is later
used in trace_mctp_key_acquire(). Add an else statement
to use the key only when mctp_key_add() is successful.
Fixes: 4f9e1ba6de45 ("mctp: Add tracepoints for tag/key handling")
Signed-off-by: Tom Rix <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
ocelot_vlan_member_del() will free the struct ocelot_bridge_vlan, so if
this is the same as the port's pvid_vlan which we access afterwards,
what we're accessing is freed memory.
Fix the bug by determining whether to clear ocelot_port->pvid_vlan prior
to calling ocelot_vlan_member_del().
Fixes: d4004422f6f9 ("net: mscc: ocelot: track the port pvid using a pointer")
Signed-off-by: Vladimir Oltean <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
syzbot reported that two threads might write over agg_select_timer
at the same time. Make agg_select_timer atomic to fix the races.
BUG: KCSAN: data-race in bond_3ad_initiate_agg_selection / bond_3ad_state_machine_handler
read to 0xffff8881242aea90 of 4 bytes by task 1846 on cpu 1:
bond_3ad_state_machine_handler+0x99/0x2810 drivers/net/bonding/bond_3ad.c:2317
process_one_work+0x3f6/0x960 kernel/workqueue.c:2307
worker_thread+0x616/0xa70 kernel/workqueue.c:2454
kthread+0x1bf/0x1e0 kernel/kthread.c:377
ret_from_fork+0x1f/0x30
write to 0xffff8881242aea90 of 4 bytes by task 25910 on cpu 0:
bond_3ad_initiate_agg_selection+0x18/0x30 drivers/net/bonding/bond_3ad.c:1998
bond_open+0x658/0x6f0 drivers/net/bonding/bond_main.c:3967
__dev_open+0x274/0x3a0 net/core/dev.c:1407
dev_open+0x54/0x190 net/core/dev.c:1443
bond_enslave+0xcef/0x3000 drivers/net/bonding/bond_main.c:1937
do_set_master net/core/rtnetlink.c:2532 [inline]
do_setlink+0x94f/0x2500 net/core/rtnetlink.c:2736
__rtnl_newlink net/core/rtnetlink.c:3414 [inline]
rtnl_newlink+0xfeb/0x13e0 net/core/rtnetlink.c:3529
rtnetlink_rcv_msg+0x745/0x7e0 net/core/rtnetlink.c:5594
netlink_rcv_skb+0x14e/0x250 net/netlink/af_netlink.c:2494
rtnetlink_rcv+0x18/0x20 net/core/rtnetlink.c:5612
netlink_unicast_kernel net/netlink/af_netlink.c:1317 [inline]
netlink_unicast+0x602/0x6d0 net/netlink/af_netlink.c:1343
netlink_sendmsg+0x728/0x850 net/netlink/af_netlink.c:1919
sock_sendmsg_nosec net/socket.c:705 [inline]
sock_sendmsg net/socket.c:725 [inline]
____sys_sendmsg+0x39a/0x510 net/socket.c:2413
___sys_sendmsg net/socket.c:2467 [inline]
__sys_sendmsg+0x195/0x230 net/socket.c:2496
__do_sys_sendmsg net/socket.c:2505 [inline]
__se_sys_sendmsg net/socket.c:2503 [inline]
__x64_sys_sendmsg+0x42/0x50 net/socket.c:2503
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x44/0xd0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
value changed: 0x00000050 -> 0x0000004f
Reported by Kernel Concurrency Sanitizer on:
CPU: 0 PID: 25910 Comm: syz-executor.1 Tainted: G W 5.17.0-rc4-syzkaller-dirty #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <[email protected]>
Reported-by: syzbot <[email protected]>
Cc: Jay Vosburgh <[email protected]>
Cc: Veaceslav Falico <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
1588 Single Step Timestamping code path uses a mutex to
enforce atomicity for two events:
- update of ptp single step register
- transmit ptp event packet
Before this patch the mutex was not initialized. This
caused unexpected crashes in the Tx function.
Fixes: c55211892f463 ("dpaa2-eth: support PTP Sync packet one-step timestamping")
Signed-off-by: Radu Bulie <[email protected]>
Reviewed-by: Ioana Ciornei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Clang static analysis reports this representative problem
dpaa2-switch-flower.c:616:24: warning: The right operand of '=='
is a garbage value
tmp->cfg.vlan_id == vlan) {
^ ~~~~
vlan is set in dpaa2_switch_flower_parse_mirror_key(). However
this function can return success without setting vlan. So
change the default return to -EOPNOTSUPP.
Fixes: 0f3faece5808 ("dpaa2-switch: add VLAN based mirroring")
Signed-off-by: Tom Rix <[email protected]>
Reviewed-by: Ioana Ciornei <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|