| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Igor Russkikh says:
====================
net: aquantia: various fixes May, 2019
Here is a set of various bug fixes found on recent verification stage.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Thats a known quirk in windows tcp stack it can produce 0xffff checksum.
Thats incorrect but it is.
Atlantic HW with LRO enabled handles that incorrectly and changes csum to
0xfffe - but indicates that csum is invalid. This causes driver to pass
packet to linux networking stack with CSUM_NONE, stack eventually drops
the packet.
There is a quirk in atlantic HW to enable correct processing of
0xffff incorrect csum. Enable it.
The visible bug is that windows link partner with software generated csums
caused TCP connection to be unstable since all packets that csum value
are dropped.
Reported-by: Dmitry Bezrukov <[email protected]>
Signed-off-by: Nikita Danilov <[email protected]>
Signed-off-by: Igor Russkikh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Driver stops producing skbs on ring if a packet with FCS error
was coalesced into LRO session. Ring gets hang forever.
Thats a logical error in driver processing descriptors:
When rx_stat indicates MAC Error, next pointer and eop flags
are not filled. This confuses driver so it waits for descriptor 0
to be filled by HW.
Solution is fill next pointer and eop flag even for packets with FCS error.
Fixes: bab6de8fd180b ("net: ethernet: aquantia: Atlantic A0 and B0 specific functions.")
Signed-off-by: Igor Russkikh <[email protected]>
Signed-off-by: Dmitry Bogdanov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Atlantic hardware does not aggregate nor breaks LRO sessions
with bad csum packets. This means driver should take care of that.
If in LRO session there is a non-first descriptor with invalid
checksum (L2/L3/L4), the driver must account this information
in csum application logic.
Fixes: 018423e90bee8 ("net: ethernet: aquantia: Add ring support code")
Signed-off-by: Igor Russkikh <[email protected]>
Signed-off-by: Dmitry Bogdanov <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In case no other traffic happening on the ring, full tx cleanup
may not be completed. That may cause socket buffer to overflow
and tx traffic to stuck until next activity on the ring happens.
This is due to logic error in budget variable decrementor.
Variable is compared with zero, and then post decremented,
causing it to become MAX_INT. Solution is remove decrementor
from the `for` statement and rewrite it in a clear way.
Fixes: b647d3980948e ("net: aquantia: Add tx clean budget and valid budget handling logic")
Signed-off-by: Igor Russkikh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The devcoredump needs to operate on a stable state of the MMU while
it is writing the MMU state to the coredump. The missing lock
allowed both the userspace submit, as well as the GPU job finish
paths to mutate the MMU state while a coredump is under way.
Fixes: a8c21a5451d8 (drm/etnaviv: add initial etnaviv DRM driver)
Reported-by: David Jander <[email protected]>
Signed-off-by: Lucas Stach <[email protected]>
Tested-by: David Jander <[email protected]>
Reviewed-by: Philipp Zabel <[email protected]>
|
|
When hidden gendisk is revalidated, there's no point in revalidating
associated block device as there's none. We would thus just create new
bdev inode, report "detected capacity change from 0 to XXX" message and
evict the bdev inode again. Avoid this pointless dance and confusing
message in the kernel log.
Reviewed-by: Hannes Reinecke <[email protected]>
Reviewed-by: Christoph Hellwig <[email protected]>
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Loop module allows calling LOOP_SET_FD while there are other openers of
the loop device. Even exclusive ones. This can lead to weird
consequences such as kernel deadlocks like:
mount_bdev() lo_ioctl()
udf_fill_super()
udf_load_vrs()
sb_set_blocksize() - sets desired block size B
udf_tread()
sb_bread()
__bread_gfp(bdev, block, B)
loop_set_fd()
set_blocksize()
- now __getblk_slow() indefinitely loops because B != bdev
block size
Fix the problem by disallowing LOOP_SET_FD ioctl when there are
exclusive openers of a loop device.
[Deliberately chosen not to CC stable as a user with priviledges to
trigger this race has other means of taking the system down and this
has a potential of breaking some weird userspace setup]
Reported-and-tested-by: [email protected]
Signed-off-by: Jan Kara <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
The current buffer check halves the frame rate on non-plus i.MX6Q,
as the IDMAC current buffer pointer is not yet updated when
ipu_plane_atomic_update_pending is called from the EOF irq handler.
Fixes: 70e8a0c71e9 ("drm/imx: ipuv3-plane: add function to query atomic update status")
Tested-by: Marco Felsch <[email protected]>
Signed-off-by: Philipp Zabel <[email protected]>
Cc: [email protected]
|
|
There is no good reason to flood the kernel log with a WARN
stacktrace just because someone tried to mmap a prime buffer.
Signed-off-by: Gerd Hoffmann <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Link: http://patchwork.freedesktop.org/patch/msgid/[email protected]
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into fixes
intel-pinctrl for v5.2-2
Fix a laggish ELAN touchpad responsiveness due to an odd interrupt masking.
The following is an automated git shortlog grouped by driver:
intel:
- Clear interrupt status in mask/unmask callback
- Use GENMASK() consistently
|
|
If a PCI driver leaves the device handled by it in D0 and calls
pci_save_state() on the device in its ->suspend() or ->suspend_late()
callback, it can expect the device to stay in D0 over the whole
s2idle cycle. However, that may not be the case if there is a
spurious wakeup while the system is suspended, because in that case
pci_pm_suspend_noirq() will run again after pci_pm_resume_noirq()
which calls pci_restore_state(), via pci_pm_default_resume_early(),
so state_saved is cleared and the second iteration of
pci_pm_suspend_noirq() will invoke pci_prepare_to_sleep() which
may change the power state of the device.
To avoid that, add a new internal flag, skip_bus_pm, that will be set
by pci_pm_suspend_noirq() when it runs for the first time during the
given system suspend-resume cycle if the state of the device has
been saved already and the device is still in D0. Setting that flag
will cause the next iterations of pci_pm_suspend_noirq() to set
state_saved for pci_pm_resume_noirq(), so that it always restores the
device state from the originally saved data, and avoid calling
pci_prepare_to_sleep() for the device.
Fixes: 33e4f80ee69b ("ACPI / PM: Ignore spurious SCI wakeups from suspend-to-idle")
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Keith Busch <[email protected]>
Reviewed-by: Mika Westerberg <[email protected]>
|
|
On systems with ACPI platform firmware the last stage of hibernation
is analogous to system suspend to S3 (suspend-to-RAM), so it should
be handled analogously. In particular, pm_suspend_via_firmware()
should return 'true' in that stage to let the callers of it know that
control will be passed to the platform firmware going forward, so
pm_set_suspend_via_firmware() needs to be called then in analogy with
acpi_suspend_begin().
However, the platform hibernation ->begin() callback is invoked
during the "freeze" transition (before creating a snapshot image of
system memory) as well as during the "hibernate" transition which is
the last stage of it and pm_set_suspend_via_firmware() should be
invoked by that callback in the latter stage only.
In order to implement that redefine the hibernation ->begin()
callback to take a pm_message_t argument to indicate which stage
of hibernation is taking place and rework acpi_hibernation_begin()
and acpi_hibernation_begin_old() to take it into account as needed.
Signed-off-by: Rafael J. Wysocki <[email protected]>
|
|
Both acpi_pci_need_resume() and acpi_dev_needs_resume() check if the
current ACPI wakeup configuration of the device matches what is
expected as far as system wakeup from sleep states is concerned, as
reflected by the device_may_wakeup() return value for the device.
However, they only should do that if wakeup.flags.valid is set for
the device's ACPI companion, because otherwise the wakeup.prepare_count
value for it is meaningless.
Add the missing wakeup.flags.valid checks to these functions.
Signed-off-by: Rafael J. Wysocki <[email protected]>
Reviewed-by: Mika Westerberg <[email protected]>
|
|
Building with Clang reports the redundant use of MODULE_DEVICE_TABLE():
drivers/net/ethernet/dec/tulip/de4x5.c:2110:1: error: redefinition of '__mod_eisa__de4x5_eisa_ids_device_table'
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table \
^
<scratch space>:90:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^
drivers/net/ethernet/dec/tulip/de4x5.c:2100:1: note: previous definition is here
MODULE_DEVICE_TABLE(eisa, de4x5_eisa_ids);
^
./include/linux/module.h:229:21: note: expanded from macro 'MODULE_DEVICE_TABLE'
extern typeof(name) __mod_##type##__##name##_device_table \
^
<scratch space>:85:1: note: expanded from here
__mod_eisa__de4x5_eisa_ids_device_table
^
This drops the one further from the table definition to match the common
use of MODULE_DEVICE_TABLE().
Fixes: 07563c711fbc ("EISA bus MODALIAS attributes support")
Signed-off-by: Kees Cook <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Jakub Kicinski says:
====================
net/tls: two fixes for rx_list pre-handling
tls_sw_recvmsg() had been modified to cater better to async decrypt.
Partially read records now live on the rx_list. Data is copied from
this list before the old do {} while loop, and the not included
correctly in deciding whether to sleep or not and lowat threshold
handling. These modifications, unfortunately, added some bugs.
First patch fixes lowat - we need to calculate the threshold early
and make sure all copied data is compared to the threshold, not just
the freshly decrypted data.
Third patch fixes sleep - if data is picked up from rx_list and
no flags are set, we should not put the process to sleep, but
rather return the partial read.
Patches 2 and 4 add test cases for these bugs, both will cause
a sleep and test timeout before the fix.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Add a test which sends 15 bytes of data, and then tries
to read 10 byes twice. Previously the second read would
sleep indifinitely, since the record was already decrypted
and there is only 5 bytes left, not full 10.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Dirk van der Merwe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
When tls_sw_recvmsg() partially copies a record it pops that
record from ctx->recv_pkt and places it on rx_list.
Next iteration of tls_sw_recvmsg() reads from rx_list via
process_rx_list() before it enters the decryption loop.
If there is no more records to be read tls_wait_data()
will put the process on the wait queue and got to sleep.
This is incorrect, because some data was already copied
in process_rx_list().
In case of RPC connections process may never get woken up,
because peer also simply blocks in read().
I think this may also fix a similar issue when BPF is at
play, because after __tcp_bpf_recvmsg() returns some data
we subtract it from len and use continue to restart the
loop, but len could have just reached 0, so again we'd
sleep unnecessarily. That's added by:
commit d3b18ad31f93 ("tls: add bpf support to sk_msg handling")
Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records")
Reported-by: David Beckett <[email protected]>
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Dirk van der Merwe <[email protected]>
Tested-by: David Beckett <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Set SO_RCVLOWAT and test it gets respected when gathering
data from multiple records.
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Dirk van der Merwe <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
If some of the data came from the previous record, i.e. from
the rx_list it had already been decrypted, so it's not counted
towards the "decrypted" variable, but the "copied" variable.
Take that into account when checking lowat.
When calculating lowat target we need to pass the original len.
E.g. if lowat is at 80, len is 100 and we had 30 bytes on rx_list
target would currently be incorrectly calculated as 70, even though
we only need 50 more bytes to make up the 80.
Fixes: 692d7b5d1f91 ("tls: Fix recvmsg() to be able to peek across multiple records")
Signed-off-by: Jakub Kicinski <[email protected]>
Reviewed-by: Dirk van der Merwe <[email protected]>
Tested-by: David Beckett <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing warning fix from Steven Rostedt:
"Make the GCC 9 warning for sub struct memset go away.
GCC 9 now warns about calling memset() on partial structures when it
goes across multiple fields. This adds a helper for the place in
tracing that does this type of clearing of a structure"
* tag 'trace-v5.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Silence GCC 9 array bounds warning
|
|
Pull KVM fixes from Paolo Bonzini:
"The usual smattering of fixes and tunings that came in too late for
the merge window, but should not wait four months before they appear
in a release.
I also travelled a bit more than usual in the first part of May, which
didn't help with picking up patches and reports promptly"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (33 commits)
KVM: x86: fix return value for reserved EFER
tools/kvm_stat: fix fields filter for child events
KVM: selftests: Wrap vcpu_nested_state_get/set functions with x86 guard
kvm: selftests: aarch64: compile with warnings on
kvm: selftests: aarch64: fix default vm mode
kvm: selftests: aarch64: dirty_log_test: fix unaligned memslot size
KVM: s390: fix memory slot handling for KVM_SET_USER_MEMORY_REGION
KVM: x86/pmu: do not mask the value that is written to fixed PMUs
KVM: x86/pmu: mask the result of rdpmc according to the width of the counters
x86/kvm/pmu: Set AMD's virt PMU version to 1
KVM: x86: do not spam dmesg with VMCS/VMCB dumps
kvm: Check irqchip mode before assign irqfd
kvm: svm/avic: fix off-by-one in checking host APIC ID
KVM: selftests: do not blindly clobber registers in guest asm
KVM: selftests: Remove duplicated TEST_ASSERT in hyperv_cpuid.c
KVM: LAPIC: Expose per-vCPU timer_advance_ns to userspace
KVM: LAPIC: Fix lapic_timer_advance_ns parameter overflow
kvm: vmx: Fix -Wmissing-prototypes warnings
KVM: nVMX: Fix using __this_cpu_read() in preemptible context
kvm: fix compilation on s390
...
|
|
Ioana Radulescu says:
====================
dpaa2-eth: Fix smatch warnings
Fix a couple of warnings reported by smatch.
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
Function dpaa2_eth_cls_key_size() expects a 64bit argument,
but DPAA2_ETH_DIST_ALL is defined as UINT_MAX. Fix this.
Signed-off-by: Ioana Radulescu <[email protected]>
Reported-by: Dan Carpenter <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Use PTR_ERR_OR_ZERO instead of PTR_ERR in cases where
zero is a valid input. Reported by smatch.
Signed-off-by: Ioana Radulescu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Smatch reports a potential spectre vulnerability in the dpaa2-eth
driver, where the value of rxnfc->fs.location (which is provided
from user-space) is used as index in an array.
Add a call to array_index_nospec() to sanitize the access.
Signed-off-by: Ioana Radulescu <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Once in a while, with just the right timing, 802.3ad slaves will fail to
properly initialize, winding up in a weird state, with a partner system
mac address of 00:00:00:00:00:00. This started happening after a fix to
properly track link_failure_count tracking, where an 802.3ad slave that
reported itself as link up in the miimon code, but wasn't able to get a
valid speed/duplex, started getting set to BOND_LINK_FAIL instead of
BOND_LINK_DOWN. That was the proper thing to do for the general "my link
went down" case, but has created a link initialization race that can put
the interface in this odd state.
The simple fix is to instead set the slave link to BOND_LINK_DOWN again,
if the link has never been up (last_link_up == 0), so the link state
doesn't bounce from BOND_LINK_DOWN to BOND_LINK_FAIL -- it hasn't failed
in this case, it simply hasn't been up yet, and this prevents the
unnecessary state change from DOWN to FAIL and getting stuck in an init
failure w/o a partner mac.
Fixes: ea53abfab960 ("bonding/802.3ad: fix link_failure_count tracking")
CC: Jay Vosburgh <[email protected]>
CC: Veaceslav Falico <[email protected]>
CC: Andy Gospodarek <[email protected]>
CC: "David S. Miller" <[email protected]>
CC: [email protected]
Tested-by: Heesoon Kim <[email protected]>
Signed-off-by: Jarod Wilson <[email protected]>
Acked-by: Jay Vosburgh <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random
Pull /dev/random fix from Ted Ts'o:
"Fix a soft lockup regression when reading from /dev/random in early
boot"
* tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
random: fix soft lockup when trying to read from an uninitialized blocking pool
|
|
If io_copy_iov() fails, it will break the loop and report success,
albeit partially completed operation.
Signed-off-by: Pavel Begunkov <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
|
|
Fixes: eb9d1bf079bb: "random: only read from /dev/random after its pool has received 128 bits"
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
|
|
Starting with GCC 9, -Warray-bounds detects cases when memset is called
starting on a member of a struct but the size to be cleared ends up
writing over further members.
Such a call happens in the trace code to clear, at once, all members
after and including `seq` on struct trace_iterator:
In function 'memset',
inlined from 'ftrace_dump' at kernel/trace/trace.c:8914:3:
./include/linux/string.h:344:9: warning: '__builtin_memset' offset
[8505, 8560] from the object at 'iter' is out of the bounds of
referenced subobject 'seq' with type 'struct trace_seq' at offset
4368 [-Warray-bounds]
344 | return __builtin_memset(p, c, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~
In order to avoid GCC complaining about it, we compute the address
ourselves by adding the offsetof distance instead of referring
directly to the member.
Since there are two places doing this clear (trace.c and trace_kdb.c),
take the chance to move the workaround into a single place in
the internal header.
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Miguel Ojeda <[email protected]>
[ Removed unnecessary parenthesis around "iter" ]
Signed-off-by: Steven Rostedt (VMware) <[email protected]>
|
|
ethtool ops get_rxfh_context and set_rxfh_context are used to create,
remove and access parameters associated to RSS contexts, in a similar
fashion to get_rxfh and set_rxfh.
Add a small descritopn of these callbacks in the struct ethtool_ops doc.
Signed-off-by: Maxime Chevallier <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug fixes (including a regression fix) for ext4"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix dcache lookup of !casefolded directories
ext4: do not delete unlinked inode from orphan list on failed truncate
ext4: wait for outstanding dio during truncate in nojournal mode
ext4: don't perform block validity checks on the journal inode
|
|
Biao Huang says:
====================
fix some bugs in stmmac
changes in v4:
since MTL_OPERATION_MODE write back issue has be fixed in the latest driver,
remove original patch#3
changes in v3:
add a Fixes:tag for each patch
changes in v2:
1. update rx_tail_addr as Jose's comment
2. changes clk_csr condition as Alex's proposition
3. remove init lines in dwmac-mediatek, get clk_csr from dts instead.
v1:
This series fix some bugs in stmmac driver
3 patches are for common stmmac or dwmac4:
1. update rx tail pointer to fix rx dma hang issue.
2. change condition for mdc clock to fix csr_clk can't be zero issue.
3. write the modified value back to MTL_OPERATION_MODE.
1 patch is for dwmac-mediatek:
modify csr_clk value to fix mdio read/write fail issue for dwmac-mediatek
====================
Signed-off-by: David S. Miller <[email protected]>
|
|
1. the frequency of csr clock is 66.5MHz, so the csr_clk value should
be 0 other than 5.
2. the csr_clk can be got from device tree, so remove initialization here.
Fixes: 9992f37e346b ("stmmac: dwmac-mediatek: add support for mt2712")
Signed-off-by: Biao Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
The specific clk_csr value can be zero, and
stmmac_clk is necessary for MDC clock which can be set dynamically.
So, change the condition from plat->clk_csr to plat->stmmac_clk to
fix clk_csr can't be zero issue.
Fixes: cd7201f477b9 ("stmmac: MDC clock dynamically based on the csr clock input")
Signed-off-by: Biao Huang <[email protected]>
Acked-by: Alexandre TORGUE <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
Currently we will not update the receive descriptor tail pointer in
stmmac_rx_refill. Rx dma will think no available descriptors and stop
once received packets exceed DMA_RX_SIZE, so that the rx only test will fail.
Update the receive tail pointer in stmmac_rx_refill to add more descriptors
to the rx channel, so packets can be received continually
Fixes: 54139cf3bb33 ("net: stmmac: adding multiple buffers for rx")
Signed-off-by: Biao Huang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In function ip_ra_control(), the pointer new_ra is allocated a memory
space via kmalloc(). And it is used in the following codes. However,
when there is a memory allocation error, kmalloc() fails. Thus null
pointer dereference may happen. And it will cause the kernel to crash.
Therefore, we should check the return value and handle the error.
Signed-off-by: Gen Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
In function ip6_ra_control(), the pointer new_ra is allocated a memory
space via kmalloc(). And it is used in the following codes. However,
when there is a memory allocation error, kmalloc() fails. Thus null
pointer dereference may happen. And it will cause the kernel to crash.
Therefore, we should check the return value and handle the error.
Signed-off-by: Gen Zhang <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fixes from Dan Williams:
- Fix a regression that disabled device-mapper dax support
- Remove unnecessary hardened-user-copy overhead (>30%) for dax
read(2)/write(2).
- Fix some compilation warnings.
* tag 'libnvdimm-fixes-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/pmem: Bypass CONFIG_HARDENED_USERCOPY overhead
dax: Arrange for dax_supported check to span multiple devices
libnvdimm: Fix compilation warnings with W=1
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Tom Zanussi sent me some small fixes and cleanups to the histogram
code and I forgot to incorporate them.
I also added a small clean up patch that was sent to me a while ago
and I just noticed it"
* tag 'trace-v5.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
kernel/trace/trace.h: Remove duplicate header of trace_seq.h
tracing: Add a check_val() check before updating cond_snapshot() track_val
tracing: Check keys for variable references in expressions too
tracing: Prevent hist_field_var_ref() from accessing NULL tracing_map_elts
|
|
Only try and access the EFI configuration tables if there there are any
reported. This allows EFI to be continued to used on systems where there
are no configuration table entries.
Signed-off-by: Rob Bradford <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Cc: Gen Zhang <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
The old_memmap flow in efi_call_phys_prolog() performs numerous memory
allocations, and either does not check for failure at all, or it does
but fails to propagate it back to the caller, which may end up calling
into the firmware with an incomplete 1:1 mapping.
So let's fix this by returning NULL from efi_call_phys_prolog() on
memory allocation failures only, and by handling this condition in the
caller. Also, clean up any half baked sets of page tables that we may
have created before returning with a NULL return value.
Note that any failure at this level will trigger a panic() two levels
up, so none of this makes a huge difference, but it is a nice cleanup
nonetheless.
[ardb: update commit log, add efi_call_phys_epilog() call on error path]
Signed-off-by: Gen Zhang <[email protected]>
Signed-off-by: Ard Biesheuvel <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Rob Bradford <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Cc: [email protected]
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
|
|
Found by visual inspection, this wasn't caught by my xfstest, since it's
effect is ignoring positive dentries in the cache the fallback just goes
to the disk. it was introduced in the last iteration of the
case-insensitive patch.
d_compare should return 0 when the entries match, so make sure we are
correctly comparing the entire string if the encoding feature is set and
we are on a case-INsensitive directory.
Fixes: b886ee3e778e ("ext4: Support case-insensitive file name lookups")
Signed-off-by: Gabriel Krisman Bertazi <[email protected]>
Signed-off-by: Theodore Ts'o <[email protected]>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is the same set of patches sent in the merge window as the final
pull except that Martin's read only rework is replaced with a simple
revert of the original change that caused the regression.
Everything else is an obvious fix or small cleanup"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
Revert "scsi: sd: Keep disk read-only when re-reading partition"
scsi: bnx2fc: fix incorrect cast to u64 on shift operation
scsi: smartpqi: Reporting unhandled SCSI errors
scsi: myrs: Fix uninitialized variable
scsi: lpfc: Update lpfc version to 12.2.0.2
scsi: lpfc: add check for loss of ndlp when sending RRQ
scsi: lpfc: correct rcu unlock issue in lpfc_nvme_info_show
scsi: lpfc: resolve lockdep warnings
scsi: qedi: remove set but not used variables 'cdev' and 'udev'
scsi: qedi: remove memset/memcpy to nfunc and use func instead
scsi: qla2xxx: Add cleanup for PCI EEH recovery
|
|
Pull block fixes from Jens Axboe:
- NVMe pull request from Keith, with fixes from a few folks.
- bio and sbitmap before atomic barrier fixes (Andrea)
- Hang fix for blk-mq freeze and unfreeze (Bob)
- Single segment count regression fix (Christoph)
- AoE now has a new maintainer
- tools/io_uring/ Makefile fix, and sync with liburing (me)
* tag 'for-linus-20190524' of git://git.kernel.dk/linux-block: (23 commits)
tools/io_uring: sync with liburing
tools/io_uring: fix Makefile for pthread library link
blk-mq: fix hang caused by freeze/unfreeze sequence
block: remove the bi_seg_{front,back}_size fields in struct bio
block: remove the segment size check in bio_will_gap
block: force an unlimited segment size on queues with a virt boundary
block: don't decrement nr_phys_segments for physically contigous segments
sbitmap: fix improper use of smp_mb__before_atomic()
bio: fix improper use of smp_mb__before_atomic()
aoe: list new maintainer for aoe driver
nvme-pci: use blk-mq mapping for unmanaged irqs
nvme: update MAINTAINERS
nvme: copy MTFA field from identify controller
nvme: fix memory leak for power latency tolerance
nvme: release namespace SRCU protection before performing controller ioctls
nvme: merge nvme_ns_ioctl into nvme_ioctl
nvme: remove the ifdef around nvme_nvm_ioctl
nvme: fix srcu locking on error return in nvme_get_ns_from_disk
nvme: Fix known effects
nvme-pci: Sync queues on reset
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest
Pull Kselftest fixes from Shuah Khan:
- Two fixes to regressions introduced in kselftest Makefile test run
output refactoring work (Kees Cook)
- Adding Atom support to syscall_arg_fault test (Tong Bo)
* tag 'linux-kselftest-5.2-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux-kselftest:
selftests/timers: Add missing fflush(stdout) calls
selftests: Remove forced unbuffering for test running
selftests/x86: Support Atom for syscall_arg_fault test
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull Devicetree fixes from Rob Herring:
- Update checkpatch.pl to use DT vendor-prefixes.yaml
- Fix DT binding references to files converted to DT schema
- Clean-up Arm CPU binding examples to match schema
- Add Sifive block versioning scheme documentation
- Pass binding directory base to validation tools for reference lookups
* tag 'devicetree-fixes-for-5.2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
checkpatch.pl: Update DT vendor prefix check
dt: bindings: mtd: replace references to nand.txt with nand-controller.yaml
dt-bindings: interrupt-controller: arm,gic: Fix schema errors in example
dt-bindings: arm: Clean up CPU binding examples
dt: fix refs that were renamed to json with the same file name
dt-bindings: Pass binding directory to validation tools
dt-bindings: sifive: describe sifive-blocks versioning
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pule more SPDX updates from Greg KH:
"Here is another set of reviewed patches that adds SPDX tags to
different kernel files, based on a set of rules that are being used to
parse the comments to try to determine that the license of the file is
"GPL-2.0-or-later".
Only the "obvious" versions of these matches are included here, a
number of "non-obvious" variants of text have been found but those
have been postponed for later review and analysis.
These patches have been out for review on the linux-spdx@vger mailing
list, and while they were created by automatic tools, they were
hand-verified by a bunch of different people, all whom names are on
the patches are reviewers"
* tag 'spdx-5.2-rc2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (85 commits)
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 125
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 123
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 122
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 121
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 120
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 119
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 118
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 116
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 114
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 113
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 112
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 111
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 110
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 106
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 105
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 104
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 103
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 102
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 101
treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 98
...
|